summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--command.cfg.in273
-rw-r--r--configure.in1
2 files changed, 0 insertions, 274 deletions
diff --git a/command.cfg.in b/command.cfg.in
deleted file mode 100644
index aff33d2..0000000
--- a/command.cfg.in
+++ /dev/null
@@ -1,273 +0,0 @@
1###############################################################################
2# COMMAND CONFIGURATION
3#
4# SYNTAX:
5# command[<command_name>]=<command_line>
6#
7# <command_name> = A short name used to identify the command
8# <command_line> = The actual command line. The command line doesn't have to
9# be surrounded in quotes, but may contain quotes as needed within
10# the command line. Take care to use single quotes at the
11# outer edges of commands or you will have command line
12# expansion problems when the command is executed by the shell.
13# Any valid shell command can be used. Multiple commands can
14# be separated with semicolons, piping is allowed. The
15# command line can contain macros, but not are macros are valid
16# at all time (notifications, service checks, etc). See the
17# HTML documentaion for more informationon on using macros in
18# commands.
19#
20# Note: Service check, service notification, host check, host notification,
21# service event handler, and host event handler functions are all defined
22# here.
23#
24# Note: Use the convertcfg program in the contrib directory of the Nagios
25# distribution to convert this file into a object file format.
26#
27###############################################################################
28
29# Service notification command - send email with problem summary
30
31command[notify-by-email]=/bin/printf "$OUTPUT$" | /bin/mail -s '$SERVICESTATE$ alert for $HOSTALIAS$/$SERVICEDESC$' $CONTACTEMAIL$
32
33# Service notification command - send email to alphanumeric pager
34# gateway The notify-by-epager command assumes that each contact has a
35# pager email gateway, and that the address has been entered into the
36# appropriate contact field instead of an actual pager number.
37# (i.e. 'pagejoe@nowhere.com' routes mail to Joe's alphanumeric pager)
38
39command[notify-by-epager]=/bin/echo "$OUTPUT$" | /bin/mail -s '$HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$' $CONTACTPAGER$
40
41# Host notification commands (one for email, one for alphanumeric
42# pager with email gateway)
43
44command[host-notify-by-email]=/bin/echo -e "***** Nagios *****\n\nHost "$HOSTALIAS$" is $HOSTSTATE$!\n\nDate/Time: $DATETIME$\n" | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTEMAIL$
45
46command[host-notify-by-epager]=/bin/echo '$HOSTALIAS$ is $HOSTSTATE$!' | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTPAGER$
47
48
49## Send notifications to a pager using modem with Qpage (www.qpage.com)
50
51command[notify-by-qpage]=/usr/bin/printf "Service: %s\nHost: %s\nAddress: %s\nState: %s\nInfo: %s\nDate: %s" '$SERVICEDESC$' '$HOSTNAME$' '$HOSTADDRESS$' '$SERVICESTATE$' '$OUTPUT$' '$DATETIME' | /usr/local/bin/qpage -l 0 -p $CONTACTPAGER$
52
53command[host-notify-by-qpage]=/usr/bin/printf "Host: %s is %s\nInfo: %s\nDate: %s" '$HOSTALIAS$' '$HOSTSTATES$' '$OUTPUT$' '$DATETIME' | /usr/local/bin/qpage -l 0 -p $CONTACTPAGER$
54
55## Send notifications using SMSclient (www.smsclient.org)
56command[notify-by-smsclient]=/usr/bin/sms_client -q $CONTACTPAGER$ "$NOTIFICATIONTYPE$: $HOSTADDRESS$ $HOSTALIAS$: $SERVICEDESC$ is $SERVICESTATE$"
57command[host-notify-by-smsclient]=/usr/bin/sms_client -q $CONTACTPAGER$ "Host $HOSTALIAS$ is $HOSTSTATE$; $OUTPUT$; $DATETIME$"
58
59
60
61
62# These are some example service check commands. See the HTML
63# documentation on the plugins for examples of how to configure
64# command definitions.
65
66command[check_tcp]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p $ARG1$
67command[check_udp]=@libexecdir@/check_udp -H $HOSTADDRESS$ -p $ARG1$
68command[check_ftp]=@libexecdir@/check_ftp -H $HOSTADDRESS$
69command[check_pop]=@libexecdir@/check_pop -H $HOSTADDRESS$
70command[check_smtp]=@libexecdir@/check_smtp -H $HOSTADDRESS$
71command[check_nntp]=@libexecdir@/check_nntp -H $HOSTADDRESS$
72command[check_telnet]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p 23
73command[check_users]=@libexecdir@/check_users -w $ARG1$ -c $ARG2$
74command[check_ntp]=@libexecdir@/check_ntp -H $HOSTADDRESS$
75command[check_ntp_ntpq]=@libexecdir@/check_ntp -H $HOSTADDRESS$ -j 10 -k 15
76command[check_flexlm]=@libexecdir@/check_flexlm -F $ARG1$
77command[check_hpjd]=@libexecdir@/check_hpjd -H $HOSTADDRESS$ -C public
78command[check_mrtg]=@libexecdir@/check_mrtg $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
79command[traffic_average]=@libexecdir@/check_mrtgtraf $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$
80command[check_load]=@libexecdir@/check_load $ARG1$ $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
81
82command[check_disk]=@libexecdir@/check_disk -w 85% -c 95% -p $ARG1$
83command[check_dns]=@libexecdir@/check_dns -H www.yahoo.com -s $HOSTADDRESS$
84command[check_http]=@libexecdir@/check_http -H $HOSTADDRESS$ -I $HOSTADDRESS$
85command[check_http2]=@libexecdir@/check_http -H $ARG1$ -I $HOSTADDRESS$ -w $ARG2$ -c $ARG3$
86command[check_pgsql]=@libexecdir@/check_pgsql -H $HOSTADDRESS$
87command[check_ping]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 10:20% -c 60:100%
88command[check_procs]=@libexecdir@/check_procs -w $ARG1$ -c $ARG2$
89command[check_procs_zombie]=@libexecdir@/check_procs -w $ARG1$ -c $ARG2$ -s Z
90command[check_procs_httpd]=@libexecdir@/check_procs -w 5:$ARG1$ -c 1:$ARG2$ -C httpd
91command[check_procs_vsz]=@libexecdir@/check_procs -w 8096 -c 16182 -C httpd --metric VSZ
92command[check_ups]=@libexecdir@/check_ups -H $HOSTADDRESS$ -u $ARG1$
93
94# An example of using check_by_ssh as an active service check
95command[ssh_disk]=@libexecdir@/check_by_ssh -H $HOSTADDRESS$ -C '@libexecdir@/check_disk -w 85% -c 95% -p $ARG1$'
96
97#
98# UCD_SNMP equivalents for some of the commands above
99#
100
101command[snmp_load]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.2021.10.1.5.1,.1.3.6.1.4.1.2021.10.1.5.2,.1.3.6.1.4.1.2021.10.1.5.3 -w :$ARG2$,:$ARG3$,:$ARG4$ -w :$ARG5$,:$ARG6$,:$ARG7$ -l load
102
103command[snmp_cpustats]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.2021.11.9.0,.1.3.6.1.4.1.2021.11.10.0,.1.3.6.1.4.1.2021.11.11.0 -l 'CPU usage (user system idle)' -u '%'
104
105command[snmp_procname]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1.4.1.2021.2.1.5.$ARG2$ -w $ARG3$:$ARG4$ -c $ARG5$:$ARG6$
106
107command[snmp_disk]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o 1.3.6.1.4.1.2021.9.1.7.$ARG1$,1.3.6.1.4.1.2021.9.1.9.$ARG1$ -w $ARG2$:,:$ARG3$ -c $ARG4$:,:$ARG5$ -u 'kB free (','% used)' -l 'disk space'
108
109command[snmp_mem]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.2021.4.6.0,.1.3.6.1.4.1.2021.4.5.0 -w $ARG2$: -c $ARG3$:
110
111command[snmp_swap]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.2021.4.4.0,.1.3.6.1.4.1.2021.4.3.0 -w $ARG2$: -c $ARG3$:
112
113#
114# Slightly more generic SNMP OIDs
115# note: using partial textual OIDs here - use numeric oids if you don't have MIBDIRS defined per Net-SNMP (net-snmp.org)
116
117command[snmp_procs]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrSystem.hrSystemProcesses -w :$ARG2$ -c :$ARG3$ -l processes
118
119command[snmp_users]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrSystem.hrSystemNumUsers -w :$ARG2$ -c :$ARG3$ -l users
120
121command[snmp_mem2]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.101,host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.101 -w $ARG2$ -c $ARG3$
122
123command[snmp_swap2]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.102,host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.102 -w $ARG2$ -c $ARG3$
124
125command[snmp_mem3]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.101,host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.101 -w $ARG2$ -c $ARG3$
126
127command[snmp_swap3]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.102,host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.102 -w $ARG2$ -c $ARG3$
128
129command[snmp_disk2]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.$ARG2$ -w $ARG3$ -c $ARG4$
130
131command[snmp_tcpopen]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o tcp.tcpCurrEstab.0 -w $ARG2$ -c $ARG3$
132
133command[snmp_tcpstats]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o tcp.tcpActiveOpens.0,tcp.tcpPassiveOpens.0,tcp.tcpInSegs.0,tcp.tcpOutSegs.0,tcp.tcpRetransSegs.0 -l 'TCP stats'
134
135
136# Some snmp based network device checks (requires Net::SNMP perl module)
137
138# check all admin-up interfaces
139command[check_ifstatus]=@libexecdir@/check_ifstatus -H $HOSTADDRESS$ -C public
140
141# check particular interface by snmp ifIndex key
142command[check_ifoperstatus_ifindex]=@libexecdir@/check_ifoperstatus -H $HOSTADDRESS$ -C public -k $ARG1$
143
144# check particular interface by snmp ifDescr value (verify uniqueness before using)
145command[check_ifoperstatus_ifdescr]=@libexecdir@/check_ifoperstatus -H $HOSTADDRESS$ -C public -d $ARG1$
146
147# verify all you BGP session on a device are running (only returns warning due to some hardcoded option - to be fixed soon)
148command[check_snmp_bgpstate]=@libexecdir@/check_bgpstate -H $HOSTADDRESS$ -C public
149
150#
151# SNMP NetApp checks (Jason Truong)
152#
153#
154#command[check_netapp_uptime]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.2.1.1.3.0 --delimiter=')' -l "Uptime is"
155#
156#command[check_netapp_cpuload]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.2.1.3.0 -w 90 -c 95 -u '%' -l "CPU LOAD "
157#
158#command[check_netapp_numdisks]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.6.4.1.0,.1.3.6.1.4.1.789.1.6.4.2.0,.1.3.6.1.4.1.789.1.6.4.8.0,.1.3.6.1.4.1.789.1.6.4.7.0 -u 'Total Disks','Active','Spare','Failed' -l ""
159#
160
161#
162# SNMP Compaq Insight Agent (oids courtesy of vol)
163#
164# the following 4 return the following codes: other=1, ok=2, degraded=3, failed=4
165#
166#command[check_compaq_thermalCondition]=@libexec@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.232.6.2.1.0,.1.3.6.1.4.1.232.6.2.2.0,.1.3.6.1.4.1.232.6.2.3.0,.1.3.6.1.4.1.232.6.2.4.0 -u 'ThermalCondition','ThermalTemp','ThermalSystem','ThermalCPUFan' -w 2:2,2:2,2:2,2:2 -c 1:2,1:2,1:2,1:2 -l "Thermal status "
167#
168#
169
170
171
172# This command checks to see if a host is "alive" by pinging it. The
173# check must result in a 100% packet loss or 5 second (5000ms) round
174# trip average to produce an error.
175
176# This command checks to see if a host is "alive" by pinging it.
177command[check-host-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
178
179# This command checks to see if a printer is "alive" by pinging it.
180command[check-printer-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
181
182# This command checks to see if a switch is "alive" by pinging it.
183command[check-switch-alive]=@libexecdir@/check_ping $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
184
185# This command checks to see if a router is "alive" by pinging it.
186command[check-router-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
187
188# Check if a host is alive by doing a fast ping instead of a regular ping
189command[check-fast-alive]=@libexecdir@/check_fping -H $HOSTADDRESS$
190
191# Check if the IMAP service is alive (default port=143)
192command[check-imap]=@libexecdir@/check_imap -H $HOSTADDRESS$
193
194# Check RPC services
195command[check-rpc]=@libexecdir@/check_rpc -H $HOSTADDRESS$ -C $ARG1$
196
197# Check if the NFS server is running (version 2 and version 3)
198command[check-nfs]=@libexecdir@/check_rpc -H $HOSTADDRESS$ -C nfs -c2,3
199
200# Check game servers
201command[check_quake]=@libexecdir@/check_game qs $HOSTADDRESS$
202command[check_unreal]=@libexecdir@/check_game uns $HOSTADDRESS$ -p $ARG1$ -pf 8
203
204# Check a port that should be open
205command[check_nmap]=@libexecdir@/check_nmap -H $HOSTADDRESS$ -t 30 -p $ARG1$
206
207# Check a port that should be open and another that *could* be open,
208# but no warning is given if optional port is closed.
209
210command[check_nmap_optional]=@libexecdir@/check_nmap -H $HOSTADDRESS$ -t 60 -p $ARG1$ -o $ARG2$
211
212# Specify range to nmap
213command[check_nmap_range]=@libexecdir@/check_nmap -H $HOSTADDRESS$ -t 60 -p $ARG1$ -r $ARG2$
214
215# Specify both optional and range
216command[check_nmap_opt_range]=@libexecdir@/check_nmap -H $HOSTADDRESS$ -t 60 -p $ARG1$ -o $ARG2$ -r$ARG3$
217
218# Check Radius
219command[check_radius]=@libexecdir@/check_radius $ARG1$ $ARG2$ $HOSTADDRESS$ 1812 $ARG3$
220
221
222# Check HTTP proxy
223# This is a command for checking squid or other proxy servers which uses check
224# http to ensure an HTTP 200 comes back ..... i.e. squid actually
225# serves the page and not an error message.
226# Using check_http will allow verification of authenticated proxies
227#
228# Note:: This used to call "check_reply" which was pretty close to check_tcp
229# The functionality of check_reply has been merged into check_tcp
230
231command[check_squid]=@libexecdir@/check_http -H $HOSTADDRESS$ -p $ARG1$ -u $ARG2$ -e 'HTTP/1.0 200 OK'
232
233
234## Check RealAudio url
235command[check_real_url]=@libexecdir@/check_real $HOSTADDRESS$ -p $ARG1$ -wt $ARG2$ -ct $ARG3$ -to 5 -u $ARG4$
236
237## Check RealAudio server response
238command[check_real]=@libexecdir@/check_real $HOSTADDRESS$ -p $ARG1$ -wt $ARG2$ -ct $ARG3$ -to 5
239
240# NetWare checks via check_nwstat ( see "check_nwstat -h" for more options)
241# how many current logins
242command[check_netware_logins]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v "LOGINS" -w $ARG1$ -c $ARG2$
243# how many current connections
244command[check_nwstat_conns]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v CONNS -w $ARG1$ -c $ARG2$
245# 1 minute avg cpu load
246command[check_netware_1load]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v "LOAD1" -w 70 -c 90
247# 5 minute avg cpu load
248command[check_netware_5load]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v "LOAD5" -w 70 -c 90
249# 15 minute avg cpu load
250command[check_netware_15load]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v "LOAD15" -w 70 -c 90
251# Disk volume (% free)
252command[check_nwstat_vol_p]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v VPF$ARG1$ -w $ARG2$ -c $ARG3$
253# Disk volume (KB free)
254command[check_nwstat_vol_k]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v VKF$ARG1$ -w $ARG2$ -c $ARG3$
255# % Long term cache hits
256command[check_nwstat_ltch]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v LTCH -w $ARG1$ -c $ARG2$
257# % (of max) used packet receive buffers
258command[check_nwstat_puprb]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v PUPRB -w $ARG1$ -c $ARG2$
259# Check to see if the DS database is open
260command[check_nwstat_dsdb]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v DSDB
261
262
263
264# Netware 5 abends
265command[check_netware_abend]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v "ABENDS" -w 10 -c 30
266# Netware 5 number of current service procs
267command[check_nwstat_csprocs]=@libexecdir@/check_nwstat -H $HOSTADDRESS$ -v CSPROCS -w $ARG1$ -c $ARG2$
268
269
270# Still have to write sample entries for the following:
271#
272# check_ldap
273# check_overcr
diff --git a/configure.in b/configure.in
index a157596..4479c2d 100644
--- a/configure.in
+++ b/configure.in
@@ -1787,7 +1787,6 @@ AC_OUTPUT(
1787 plugins-scripts/utils.pm 1787 plugins-scripts/utils.pm
1788 plugins-scripts/utils.sh 1788 plugins-scripts/utils.sh
1789 perlmods/Makefile 1789 perlmods/Makefile
1790 command.cfg
1791 test.pl 1790 test.pl
1792 pkg/solaris/pkginfo 1791 pkg/solaris/pkginfo
1793 po/Makefile.in 1792 po/Makefile.in