From 23436a18516e66469aeb4d81329d62ee4bfa7a51 Mon Sep 17 00:00:00 2001 From: Klaus Ethgen Date: Wed, 28 Oct 2015 00:38:47 +0100 Subject: Fixing the stuff that is broken on btrfs (Closes #1357) diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 874a0ee..b338684 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -1038,10 +1038,7 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { void get_path_stats (struct parameter_list *p, struct fs_usage *fsp) { - /* 2007-12-08 - Workaround for Gnulib reporting insanely high available - * space on BSD (the actual value should be negative but fsp->fsu_bavail - * is unsigned) */ - p->available = fsp->fsu_bavail > fsp->fsu_bfree ? 0 : fsp->fsu_bavail; + p->available = fsp->fsu_bavail; p->available_to_root = fsp->fsu_bfree; p->used = fsp->fsu_blocks - fsp->fsu_bfree; if (freespace_ignore_reserved) { -- cgit v0.10-9-g596f From c85281d25bb4b0fc12a45b2732620f51a10344be Mon Sep 17 00:00:00 2001 From: Gerhard Lausser Date: Tue, 7 Feb 2017 14:15:47 +0100 Subject: check_snmp: put the "c" (to mark a counter) after the perfdata value diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index da9638c..b5abac1 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -576,6 +576,9 @@ main (int argc, char **argv) len = sizeof(perfstr)-strlen(perfstr)-1; strncat(perfstr, show, len>ptr-show ? ptr-show : len); + if (type) + strncat(perfstr, type, sizeof(perfstr)-strlen(perfstr)-1); + if (warning_thresholds) { strncat(perfstr, ";", sizeof(perfstr)-strlen(perfstr)-1); strncat(perfstr, warning_thresholds, sizeof(perfstr)-strlen(perfstr)-1); @@ -588,8 +591,6 @@ main (int argc, char **argv) strncat(perfstr, critical_thresholds, sizeof(perfstr)-strlen(perfstr)-1); } - if (type) - strncat(perfstr, type, sizeof(perfstr)-strlen(perfstr)-1); strncat(perfstr, " ", sizeof(perfstr)-strlen(perfstr)-1); } } -- cgit v0.10-9-g596f From 6995b510759cf531d70745b7d0c6e8a0d9010b06 Mon Sep 17 00:00:00 2001 From: Christopher Odenbach Date: Wed, 31 May 2017 14:15:47 +0200 Subject: repaired "-n" behaviour. If run with "-n ok" a host which ran completely out of swap space would return "ok" which is not desired. It should only return "ok" if there is no swap space configured at all. diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 4d5a407..0ff0c77 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -51,7 +51,7 @@ const char *email = "devel@monitoring-plugins.org"; # define SWAP_CONVERSION 1 #endif -int check_swap (int usp, float free_swap_mb); +int check_swap (int usp, float free_swap_mb, float total_swap_mb); int process_arguments (int argc, char **argv); int validate_arguments (void); void print_usage (void); @@ -128,7 +128,7 @@ main (int argc, char **argv) percent=100.0; else percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb)); + result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); if (verbose) xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -227,7 +227,7 @@ main (int argc, char **argv) free_swap_mb += dskfree_mb; if (allswaps) { percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb)); + result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); if (verbose) xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -289,7 +289,7 @@ main (int argc, char **argv) if(allswaps && dsktotal_mb > 0){ percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb)); + result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); if (verbose) { xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -328,7 +328,7 @@ main (int argc, char **argv) if(allswaps && dsktotal_mb > 0){ percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb)); + result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); if (verbose) { xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -355,7 +355,7 @@ main (int argc, char **argv) status = "- Swap is either disabled, not present, or of zero size. "; } - result = max_state (result, check_swap (percent_used, free_swap_mb)); + result = max_state (result, check_swap (percent_used, free_swap_mb, total_swap_mb)); printf (_("SWAP %s - %d%% free (%d MB out of %d MB) %s|"), state_text (result), (100 - percent_used), (int) free_swap_mb, (int) total_swap_mb, status); @@ -372,10 +372,10 @@ main (int argc, char **argv) int -check_swap (int usp, float free_swap_mb) +check_swap (int usp, float free_swap_mb, float total_swap_mb) { - if (!free_swap_mb) return no_swap_state; + if (!total_swap_mb) return no_swap_state; int result = STATE_UNKNOWN; float free_swap = free_swap_mb * (1024 * 1024); /* Convert back to bytes as warn and crit specified in bytes */ -- cgit v0.10-9-g596f From 541322969e27b07566c55448d749bc64ab7ae5c0 Mon Sep 17 00:00:00 2001 From: Stephane Lapie Date: Wed, 7 Jun 2017 15:12:53 +0900 Subject: Fix regexp for nullmailer "mailq" output As it currently is, the regular expression does not match mailq command output on a Debian Jessie setup. Three erroneous behaviors fixed : - Meaningful lines do not end with the "bytes" word - There might be one or more space before the byte count, not 2 - Time match was completely broken, it only accounted for 0-29 minutes and 0-29 seconds. diff --git a/plugins-scripts/check_mailq.pl b/plugins-scripts/check_mailq.pl index 32f498d..1fc15ff 100755 --- a/plugins-scripts/check_mailq.pl +++ b/plugins-scripts/check_mailq.pl @@ -533,7 +533,7 @@ elsif ( $mailq eq "nullmailer" ) { while () { #2006-06-22 16:00:00 282 bytes - if (/^[1-9][0-9]*-[01][0-9]-[0-3][0-9]\s[0-2][0-9]\:[0-2][0-9]\:[0-2][0-9]\s{2}[0-9]+\sbytes$/) { + if (/^[1-9][0-9]*-[01][0-9]-[0-3][0-9]\s[0-2][0-9]\:[0-5][0-9]\:[0-5][0-9]\s+[0-9]+\sbytes/) { $msg_q++ ; } } -- cgit v0.10-9-g596f From 6e67b638f8adeec91ff27bc5b82e5c9d755bc79e Mon Sep 17 00:00:00 2001 From: Michael Kraus Date: Mon, 4 Sep 2017 16:36:19 +0200 Subject: Output plugin's stderr to stderr Output plugin's stderr to stderr and do not exit with WARNING in that case diff --git a/plugins/negate.c b/plugins/negate.c index b320e35..50f62d3 100644 --- a/plugins/negate.c +++ b/plugins/negate.c @@ -86,11 +86,9 @@ main (int argc, char **argv) result = cmd_run_array (command_line, &chld_out, &chld_err, 0); } if (chld_err.lines > 0) { - printf ("Error output from command:\n"); for (i = 0; i < chld_err.lines; i++) { - printf ("%s\n", chld_err.line[i]); + fprintf (stderr, "%s\n", chld_err.line[i]); } - exit (STATE_WARNING); } /* Return UNKNOWN or worse if no output is returned */ -- cgit v0.10-9-g596f From 9671399c00fa62a708efb7371eeba64e4e73fd94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc=20S=C3=A1nchez?= Date: Wed, 6 Sep 2017 16:54:03 +0200 Subject: Adding packages-warning option This option specifies the minumum number of packages available for upgrade to return WARNING status. Default is 1 package. diff --git a/plugins/check_apt.c b/plugins/check_apt.c index b69680c..d7be575 100644 --- a/plugins/check_apt.c +++ b/plugins/check_apt.c @@ -86,6 +86,8 @@ static char *do_include = NULL; /* regexp to only include certain packages */ static char *do_exclude = NULL; /* regexp to only exclude certain packages */ static char *do_critical = NULL; /* regexp specifying critical packages */ static char *input_filename = NULL; /* input filename for testing */ +/* number of packages available for upgrade to return WARNING status */ +static int packages_warning = 1; /* other global variables */ static int stderr_warning = 0; /* if a cmd issued output on stderr */ @@ -117,7 +119,7 @@ int main (int argc, char **argv) { if(sec_count > 0){ result = max_state(result, STATE_CRITICAL); - } else if(packages_available > 0 && only_critical == 0){ + } else if(packages_available >= packages_warning && only_critical == 0){ result = max_state(result, STATE_WARNING); } else if(result > STATE_UNKNOWN){ result = STATE_UNKNOWN; @@ -170,11 +172,12 @@ int process_arguments (int argc, char **argv) { {"critical", required_argument, 0, 'c'}, {"only-critical", no_argument, 0, 'o'}, {"input-file", required_argument, 0, INPUT_FILE_OPT}, + {"packages-warning", required_argument, 0, 'w'}, {0, 0, 0, 0} }; while(1) { - c = getopt_long(argc, argv, "hVvt:u::U::d::nli:e:c:o", longopts, NULL); + c = getopt_long(argc, argv, "hVvt:u::U::d::nli:e:c:ow:", longopts, NULL); if(c == -1 || c == EOF || c == 1) break; @@ -233,6 +236,9 @@ int process_arguments (int argc, char **argv) { case INPUT_FILE_OPT: input_filename = optarg; break; + case 'w': + packages_warning = atoi(optarg); + break; default: /* print short usage statement if args not parsable */ usage5(); @@ -530,7 +536,10 @@ print_help (void) printf (" %s\n", "-o, --only-critical"); printf (" %s\n", _("Only warn about upgrades matching the critical list. The total number")); printf (" %s\n", _("of upgrades will be printed, but any non-critical upgrades will not cause")); - printf (" %s\n\n", _("the plugin to return WARNING status.")); + printf (" %s\n", _("the plugin to return WARNING status.")); + printf (" %s\n", "-w, --packages-warning"); + printf (" %s\n", _("Minumum number of packages available for upgrade to return WARNING status.")); + printf (" %s\n\n", _("Default is 1 package.")); printf ("%s\n\n", _("The following options require root privileges and should be used with care:")); printf (" %s\n", "-u, --update=OPTS"); @@ -548,5 +557,5 @@ void print_usage(void) { printf ("%s\n", _("Usage:")); - printf ("%s [[-d|-u|-U]opts] [-n] [-l] [-t timeout]\n", progname); + printf ("%s [[-d|-u|-U]opts] [-n] [-l] [-t timeout] [-w packages-warning]\n", progname); } -- cgit v0.10-9-g596f From 1410ffff281bc82d423459198cb4ea3f393b1e92 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc=20S=C3=A1nchez?= Date: Thu, 7 Sep 2017 13:31:01 +0200 Subject: Adding print top consuming processes option to check_load -W, --print-top-warning Print top consuming processes on WARNING status -C, --print-top-critical Print top consuming processes on CRITICAL status -n, --procs-to-show=NUMBER_OF_PROCS Number of processes to show when printing top consuming processes. Not useful without -W or -C. Default value is 5 diff --git a/plugins/check_load.c b/plugins/check_load.c index b1cc498..b6cfc65 100644 --- a/plugins/check_load.c +++ b/plugins/check_load.c @@ -33,6 +33,7 @@ const char *copyright = "1999-2007"; const char *email = "devel@monitoring-plugins.org"; #include "common.h" +#include "runcmd.h" #include "utils.h" #include "popen.h" @@ -52,6 +53,11 @@ static int process_arguments (int argc, char **argv); static int validate_arguments (void); void print_help (void); void print_usage (void); +static int print_top_consuming_processes(); + +static int n_procs_to_show = 5; +static int print_top_procs_on_warning = 0; +static int print_top_procs_on_critical = 0; /* strictly for pretty-print usage in loops */ static const int nums[3] = { 1, 5, 15 }; @@ -210,6 +216,11 @@ main (int argc, char **argv) printf("load%d=%.3f;%.3f;%.3f;0; ", nums[i], la[i], wload[i], cload[i]); putchar('\n'); + if (result == STATE_CRITICAL && print_top_procs_on_critical) { + print_top_consuming_processes(); + } else if (result == STATE_WARNING && print_top_procs_on_warning) { + print_top_consuming_processes(); + } return result; } @@ -227,6 +238,9 @@ process_arguments (int argc, char **argv) {"percpu", no_argument, 0, 'r'}, {"version", no_argument, 0, 'V'}, {"help", no_argument, 0, 'h'}, + {"print-top-warning", no_argument, 0, 'W'}, + {"print-top-critical", no_argument, 0, 'C'}, + {"procs-to-show", required_argument, 0, 'n'}, {0, 0, 0, 0} }; @@ -234,7 +248,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vhrc:w:", longopts, &option); + c = getopt_long (argc, argv, "Vhrc:w:WCn:", longopts, &option); if (c == -1 || c == EOF) break; @@ -255,6 +269,15 @@ process_arguments (int argc, char **argv) case 'h': /* help */ print_help (); exit (STATE_UNKNOWN); + case 'n': + n_procs_to_show = atoi(optarg); + break; + case 'W': + print_top_procs_on_warning = 1; + break; + case 'C': + print_top_procs_on_critical = 1; + break; case '?': /* help */ usage5 (); } @@ -324,6 +347,13 @@ print_help (void) printf (" %s\n", _("the load average format is the same used by \"uptime\" and \"w\"")); printf (" %s\n", "-r, --percpu"); printf (" %s\n", _("Divide the load averages by the number of CPUs (when possible)")); + printf (" %s\n", "-W, --print-top-warning"); + printf (" %s\n", _("Print top consuming processes on WARNING status")); + printf (" %s\n", "-C, --print-top-critical"); + printf (" %s\n", _("Print top consuming processes on CRITICAL status")); + printf (" %s\n", "-n, --procs-to-show=NUMBER_OF_PROCS"); + printf (" %s\n", _("Number of processes to show when printing top consuming")); + printf (" %s\n", _("processes. Not useful without -W or -C. Default value is 5")); printf (UT_SUPPORT); } @@ -332,5 +362,21 @@ void print_usage (void) { printf ("%s\n", _("Usage:")); - printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15\n", progname); + printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 [-W] [-C] [-n NUMBER_OF_PROCS]\n", progname); +} + +static int print_top_consuming_processes() { + int i = 0; + struct output chld_out, chld_err; + char *cmdline = "/bin/ps -aux --sort=-pcpu"; + if(np_runcmd(cmdline, &chld_out, &chld_err, 0) != 0){ + fprintf(stderr, _("'%s' exited with non-zero status.\n"), cmdline); + return STATE_UNKNOWN; + } + int lines_to_show = chld_out.lines < (n_procs_to_show + 1) + ? chld_out.lines : n_procs_to_show + 1; + for (i = 0; i < lines_to_show; i += 1) { + printf("%s\n", chld_out.line[i]); + } + return OK; } -- cgit v0.10-9-g596f From 0625fbb53db9401bdce95b1a403a20980a326ec4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc=20S=C3=A1nchez?= Date: Thu, 7 Sep 2017 13:55:19 +0200 Subject: Making show top consuming processes option less complicated diff --git a/plugins/check_load.c b/plugins/check_load.c index b6cfc65..5d5c115 100644 --- a/plugins/check_load.c +++ b/plugins/check_load.c @@ -55,9 +55,7 @@ void print_help (void); void print_usage (void); static int print_top_consuming_processes(); -static int n_procs_to_show = 5; -static int print_top_procs_on_warning = 0; -static int print_top_procs_on_critical = 0; +static int n_procs_to_show = 0; /* strictly for pretty-print usage in loops */ static const int nums[3] = { 1, 5, 15 }; @@ -216,9 +214,7 @@ main (int argc, char **argv) printf("load%d=%.3f;%.3f;%.3f;0; ", nums[i], la[i], wload[i], cload[i]); putchar('\n'); - if (result == STATE_CRITICAL && print_top_procs_on_critical) { - print_top_consuming_processes(); - } else if (result == STATE_WARNING && print_top_procs_on_warning) { + if (n_procs_to_show > 0) { print_top_consuming_processes(); } return result; @@ -238,8 +234,6 @@ process_arguments (int argc, char **argv) {"percpu", no_argument, 0, 'r'}, {"version", no_argument, 0, 'V'}, {"help", no_argument, 0, 'h'}, - {"print-top-warning", no_argument, 0, 'W'}, - {"print-top-critical", no_argument, 0, 'C'}, {"procs-to-show", required_argument, 0, 'n'}, {0, 0, 0, 0} }; @@ -248,7 +242,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vhrc:w:WCn:", longopts, &option); + c = getopt_long (argc, argv, "Vhrc:w:n:", longopts, &option); if (c == -1 || c == EOF) break; @@ -272,12 +266,6 @@ process_arguments (int argc, char **argv) case 'n': n_procs_to_show = atoi(optarg); break; - case 'W': - print_top_procs_on_warning = 1; - break; - case 'C': - print_top_procs_on_critical = 1; - break; case '?': /* help */ usage5 (); } @@ -347,13 +335,9 @@ print_help (void) printf (" %s\n", _("the load average format is the same used by \"uptime\" and \"w\"")); printf (" %s\n", "-r, --percpu"); printf (" %s\n", _("Divide the load averages by the number of CPUs (when possible)")); - printf (" %s\n", "-W, --print-top-warning"); - printf (" %s\n", _("Print top consuming processes on WARNING status")); - printf (" %s\n", "-C, --print-top-critical"); - printf (" %s\n", _("Print top consuming processes on CRITICAL status")); printf (" %s\n", "-n, --procs-to-show=NUMBER_OF_PROCS"); - printf (" %s\n", _("Number of processes to show when printing top consuming")); - printf (" %s\n", _("processes. Not useful without -W or -C. Default value is 5")); + printf (" %s\n", _("Number of processes to show when printing the top consuming processes.")); + printf (" %s\n", _("NUMBER_OF_PROCS=0 disables this feature. Default value is 0")); printf (UT_SUPPORT); } @@ -362,7 +346,7 @@ void print_usage (void) { printf ("%s\n", _("Usage:")); - printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 [-W] [-C] [-n NUMBER_OF_PROCS]\n", progname); + printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 [-n NUMBER_OF_PROCS]\n", progname); } static int print_top_consuming_processes() { -- cgit v0.10-9-g596f From 015a40e1b590bb847328d51bdfc4b544ae8825d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc=20S=C3=A1nchez?= Date: Thu, 7 Sep 2017 20:55:34 +0200 Subject: Using PS_COMMAND constant and ordering output by procpcpu diff --git a/plugins/check_load.c b/plugins/check_load.c index 5d5c115..6fd895f 100644 --- a/plugins/check_load.c +++ b/plugins/check_load.c @@ -349,14 +349,37 @@ print_usage (void) printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 [-n NUMBER_OF_PROCS]\n", progname); } +int cmpstringp(const void *p1, const void *p2) { + int procuid = 0; + int procpid = 0; + int procppid = 0; + int procvsz = 0; + int procrss = 0; + float procpcpu = 0; + char procstat[8]; +#ifdef PS_USES_PROCETIME + char procetime[MAX_INPUT_BUFFER]; +#endif /* PS_USES_PROCETIME */ + char procprog[MAX_INPUT_BUFFER]; + int pos; + sscanf (* (char * const *) p1, PS_FORMAT, PS_VARLIST); + float procpcpu1 = procpcpu; + sscanf (* (char * const *) p2, PS_FORMAT, PS_VARLIST); + return procpcpu1 < procpcpu; +} + static int print_top_consuming_processes() { int i = 0; struct output chld_out, chld_err; - char *cmdline = "/bin/ps -aux --sort=-pcpu"; - if(np_runcmd(cmdline, &chld_out, &chld_err, 0) != 0){ - fprintf(stderr, _("'%s' exited with non-zero status.\n"), cmdline); + if(np_runcmd(PS_COMMAND, &chld_out, &chld_err, 0) != 0){ + fprintf(stderr, _("'%s' exited with non-zero status.\n"), PS_COMMAND); + return STATE_UNKNOWN; + } + if (chld_out.lines < 2) { + fprintf(stderr, _("some error occurred getting procs list.\n")); return STATE_UNKNOWN; } + qsort(chld_out.line + 1, chld_out.lines - 1, sizeof(char*), cmpstringp); int lines_to_show = chld_out.lines < (n_procs_to_show + 1) ? chld_out.lines : n_procs_to_show + 1; for (i = 0; i < lines_to_show; i += 1) { -- cgit v0.10-9-g596f From c03e1ad081bc080cb8085bc14a94e4965a8e119e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marc=20S=C3=A1nchez?= Date: Thu, 7 Sep 2017 22:25:09 +0200 Subject: Only turn on ordering procs by CPU usage if PS_USES_PROCPCPU Disable sorting of procs by CPU usage on check_load if procpcpu is not present on PS_VARLIST diff --git a/configure.ac b/configure.ac index bf12995..08a0e78 100644 --- a/configure.ac +++ b/configure.ac @@ -1016,6 +1016,10 @@ if test -n "$ac_cv_ps_varlist" ; then AC_DEFINE(PS_USES_PROCETIME,"yes", [Whether the ps utility uses the "procetime" field]) fi + if echo "$ac_cv_ps_varlist" | grep "procpcpu" >/dev/null; then + AC_DEFINE(PS_USES_PROCPCPU,"yes", + [Whether the ps utility uses the "procpcpu" field]) + fi fi AC_PATH_PROG(PATH_TO_PING,ping) diff --git a/plugins/check_load.c b/plugins/check_load.c index 6fd895f..bf7b94b 100644 --- a/plugins/check_load.c +++ b/plugins/check_load.c @@ -349,6 +349,7 @@ print_usage (void) printf ("%s [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 [-n NUMBER_OF_PROCS]\n", progname); } +#ifdef PS_USES_PROCPCPU int cmpstringp(const void *p1, const void *p2) { int procuid = 0; int procpid = 0; @@ -367,6 +368,7 @@ int cmpstringp(const void *p1, const void *p2) { sscanf (* (char * const *) p2, PS_FORMAT, PS_VARLIST); return procpcpu1 < procpcpu; } +#endif /* PS_USES_PROCPCPU */ static int print_top_consuming_processes() { int i = 0; @@ -379,7 +381,9 @@ static int print_top_consuming_processes() { fprintf(stderr, _("some error occurred getting procs list.\n")); return STATE_UNKNOWN; } +#ifdef PS_USES_PROCPCPU qsort(chld_out.line + 1, chld_out.lines - 1, sizeof(char*), cmpstringp); +#endif /* PS_USES_PROCPCPU */ int lines_to_show = chld_out.lines < (n_procs_to_show + 1) ? chld_out.lines : n_procs_to_show + 1; for (i = 0; i < lines_to_show; i += 1) { -- cgit v0.10-9-g596f From 09a2210c477932c8df40ff820414b3a9bbec10fb Mon Sep 17 00:00:00 2001 From: Rasp8e Date: Tue, 17 Oct 2017 15:19:43 +0200 Subject: Adding Proxy-Authorization and extra headers in the case of connection through PROXY to HTTPS diff --git a/plugins/check_http.c b/plugins/check_http.c index 86a36c2..2e393eb 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -916,6 +916,21 @@ check_http (void) if (verbose) printf ("Entering CONNECT tunnel mode with proxy %s:%d to dst %s:%d\n", server_address, server_port, host_name, HTTPS_PORT); asprintf (&buf, "%s %s:%d HTTP/1.1\r\n%s\r\n", http_method, host_name, HTTPS_PORT, user_agent); + if (strlen(proxy_auth)) { + base64_encode_alloc (proxy_auth, strlen (proxy_auth), &auth); + xasprintf (&buf, "%sProxy-Authorization: Basic %s\r\n", buf, auth); + } + /* optionally send any other header tag */ + if (http_opt_headers_count) { + for (i = 0; i < http_opt_headers_count ; i++) { + if (force_host_header != http_opt_headers[i]) { + xasprintf (&buf, "%s%s\r\n", buf, http_opt_headers[i]); + } + } + /* This cannot be free'd here because a redirection will then try to access this and segfault */ + /* Covered in a testcase in tests/check_http.t */ + /* free(http_opt_headers); */ + } asprintf (&buf, "%sProxy-Connection: keep-alive\r\n", buf); asprintf (&buf, "%sHost: %s\r\n", buf, host_name); /* we finished our request, send empty line with CRLF */ -- cgit v0.10-9-g596f From 399cc141526ee77e1befce469f1fab40645f299d Mon Sep 17 00:00:00 2001 From: Bernard Spil Date: Mon, 6 Nov 2017 17:31:44 +0100 Subject: Fix build issue with MariaDB 10.2 As of 10.2 MariaDB no longer defines MYSQL_PORT. diff --git a/plugins/common.h b/plugins/common.h index 8719b50..6bf4fca 100644 --- a/plugins/common.h +++ b/plugins/common.h @@ -174,6 +174,11 @@ * */ +/* MariaDB 10.2 client does not set MYSQL_PORT */ +#ifndef MYSQL_PORT +# define MYSQL_PORT 3306 +#endif + enum { OK = 0, ERROR = -1 -- cgit v0.10-9-g596f From 9fa449119ccd9f57df9e12d4597804efd2dee3ba Mon Sep 17 00:00:00 2001 From: Michael Kraus Date: Fri, 19 Jan 2018 15:13:12 +0100 Subject: check_snmp: make calcualtion of timeout value in help output more clear diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index da9638c..88b8f38 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -1207,8 +1207,9 @@ print_help (void) printf (" %s\n", _("Separates output on multiple OID requests")); printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); + printf (" %s\n", _("NOTE the final timeout value is calculated using this formula: timeout_interval * retries + 5")); printf (" %s\n", "-e, --retries=INTEGER"); - printf (" %s\n", _("Number of retries to be used in the requests")); + printf (" %s%i%s\n", _("Number of retries to be used in the requests (default: "), DEFAULT_RETRIES, _(")")); printf (" %s\n", "-O, --perf-oids"); printf (" %s\n", _("Label performance data with OIDs instead of --label's")); -- cgit v0.10-9-g596f From b7de6ec8bd4a2df63295734d8d5af2401830b1c2 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Fri, 19 Jan 2018 17:05:46 +0100 Subject: Update check_snmp.c remove unnecessary brackets in help text diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index 88b8f38..e8a21a4 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -1209,7 +1209,7 @@ print_help (void) printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); printf (" %s\n", _("NOTE the final timeout value is calculated using this formula: timeout_interval * retries + 5")); printf (" %s\n", "-e, --retries=INTEGER"); - printf (" %s%i%s\n", _("Number of retries to be used in the requests (default: "), DEFAULT_RETRIES, _(")")); + printf (" %s%i\n", _("Number of retries to be used in the requests, default: "), DEFAULT_RETRIES); printf (" %s\n", "-O, --perf-oids"); printf (" %s\n", _("Label performance data with OIDs instead of --label's")); -- cgit v0.10-9-g596f From 96c8dd89353be67d44ce7a21b90f621ad89a2984 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 30 May 2018 19:03:43 +0200 Subject: My version of check_uptime Derived from check_mailq diff --git a/plugins-scripts/check_uptime b/plugins-scripts/check_uptime new file mode 100755 index 0000000..4bc9528 --- /dev/null +++ b/plugins-scripts/check_uptime @@ -0,0 +1,256 @@ +#!/usr/bin/perl -w + +# check_uptime - check uptime to see how long the system is running. +# + +# License Information: +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 +# USA +# +############################################################################ + +use POSIX; +use strict; +use Getopt::Long; +use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c + $opt_f $opt_s + $status $state $msg); +use FindBin; +use lib "$FindBin::Bin"; +use lib "/usr/lib/monitoring-plugins/"; +use utils qw(%ERRORS &print_revision &support &usage ); + +sub print_help (); +sub print_usage (); +sub process_arguments (); + +#$ENV{'PATH'}='/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin'; +$ENV{'BASH_ENV'}=''; +$ENV{'ENV'}=''; +$PROGNAME = "check_uptime"; +$state = $ERRORS{'UNKNOWN'}; + + +# Process arguments + +Getopt::Long::Configure('bundling'); +$status = process_arguments(); +if ($status){ + print "ERROR: processing arguments\n"; + exit $ERRORS{"UNKNOWN"}; +} + + +# Get uptime info from file + +my $uptime_file = "/proc/uptime"; + +if ( ! -r $uptime_file ) { + print "ERROR: file '$uptime_file' is not readable\n"; + exit $ERRORS{"UNKNOWN"}; +} + +if ( ! open FILE, "<", $uptime_file ) { + print "ERROR: cannot read from file '$uptime_file'\n"; + exit $ERRORS{"UNKNOWN"}; +} + +chomp( my $file_content = ); +close FILE; + +print "$uptime_file: $file_content\n" if $verbose; + +# Get first digit value (without fraction) +my ( $uptime_seconds ) = $file_content =~ /^([\d]+)/; + +# Bail out if value is not numeric +if ( $uptime_seconds !~ /^\d+$/ ) { + print "ERROR: no numeric value: $uptime_seconds\n"; + exit $ERRORS{"UNKNOWN"}; +} + + +# Do calculations for a "pretty" format (2 weeks, 5 days, ...) + +my ( $secs, $mins, $hours, $days, $weeks ); +$secs = $uptime_seconds; +if ( $secs > 100 ) { + $mins = int( $secs / 60 ); + $secs -= $mins * 60; +} +if ( $mins > 100 ) { + $hours = int( $mins / 60 ); + $mins -= $hours * 60; +} +if ( $hours > 48 ) { + $days = int( $hours / 24 ); + $hours -= $days * 24; +} +if ( $days > 14 ) { + $weeks = int( $days / 7 ); + $days -= $weeks * 7; +} + +my $pretty_uptime = ""; +$pretty_uptime .= sprintf( "%d week%s, ", $weeks, $weeks == 1 ? "" : "s" ) if $weeks; +$pretty_uptime .= sprintf( "%d day%s, ", $days, $days == 1 ? "" : "s" ) if $days; +$pretty_uptime .= sprintf( "%d hour%s, ", $hours, $hours == 1 ? "" : "s" ) if $hours; +$pretty_uptime .= sprintf( "%d minute%s, ", $mins, $mins == 1 ? "" : "s" ) if $mins; +# Replace last occurence of comma with "and" +$pretty_uptime =~ s/, $/ and /; +# Always print the seconds (though it may be 0 seconds) +$pretty_uptime .= sprintf( "%d second%s", $secs, $secs == 1 ? "" : "s" ); + + +# Default to catch errors in program +my $state_str = "UNKNOWN"; + +# Check values +if ( $uptime_seconds > $opt_c ) { + $state_str = "CRITICAL"; +} elsif ( $uptime_seconds > $opt_w ) { + $state_str = "WARNING"; +} else { + $state_str = "OK"; +} + +$msg = "$state_str: "; + +$msg .= "uptime is $uptime_seconds seconds. "; +$msg .= "Running for $pretty_uptime. " if $opt_f; +if ( $opt_s ) { + chomp( my $up_since = `uptime -s` ); + $msg .= "Running since $up_since. "; +} + +$state = $ERRORS{$state_str}; + +# Perfdata support +print "$msg|uptime=$uptime_seconds;$opt_w;$opt_c;0\n"; +exit $state; + + +##################################### +#### subs + + +sub process_arguments(){ + GetOptions + ("V" => \$opt_V, "version" => \$opt_V, + "v" => \$opt_v, "verbose" => \$opt_v, + "h" => \$opt_h, "help" => \$opt_h, + "w=s" => \$opt_w, "warning=s" => \$opt_w, # warning if above this number + "c=s" => \$opt_c, "critical=s" => \$opt_c, # critical if above this number + "f" => \$opt_f, "for" => \$opt_f, # show "running for ..." + "s" => \$opt_s, "since" => \$opt_s, # show "running since ..." + ); + + if ($opt_V) { + print_revision($PROGNAME,'2.2'); + exit $ERRORS{'UNKNOWN'}; + } + + if ($opt_h) { + print_help(); + exit $ERRORS{'UNKNOWN'}; + } + + if (defined $opt_v) { + $verbose = $opt_v; + } + + unless ( defined $opt_w && defined $opt_c ) { + print_usage(); + exit $ERRORS{'UNKNOWN'}; + } + + # Check if suffix is present + # Calculate parameter to seconds (to get an integer value finally) + # s = seconds + # m = minutes + # h = hours + # d = days + # w = weeks + my %factor = ( "s" => 1, + "m" => 60, + "h" => 60 * 60, + "d" => 60 * 60 * 24, + "w" => 60 * 60 * 24 * 7, + ); + if ( $opt_w =~ /^(\d+)([a-z])$/ ) { + my $value = $1; + my $suffix = $2; + print "warning: value=$value, suffix=$suffix\n" if $verbose; + if ( ! defined $factor{$suffix} ) { + print "Error: wrong suffix ($suffix) for warning"; + exit $ERRORS{'UNKNOWN'}; + } + $opt_w = $value * $factor{$suffix}; + } + if ( $opt_c =~ /^(\d+)([a-z])$/ ) { + my $value = $1; + my $suffix = $2; + print "critical: value=$value, suffix=$suffix\n" if $verbose; + if ( ! defined $factor{$suffix} ) { + print "Error: wrong suffix ($suffix) for critical"; + exit $ERRORS{'UNKNOWN'}; + } + $opt_c = $value * $factor{$suffix}; + } + + if ( $opt_w !~ /^\d+$/ ) { + print "Warning (-w) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; + } + if ( $opt_c !~ /^\d+$/ ) { + print "Critical (-c) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; + } + + if ( $opt_w >= $opt_c) { + print "Warning (-w) cannot be greater than Critical (-c)!\n"; + exit $ERRORS{'UNKNOWN'}; + } + + return $ERRORS{'OK'}; +} + +sub print_usage () { + print "Usage: $PROGNAME -w -c [-v]\n"; +} + +sub print_help () { + print_revision($PROGNAME,'2.2'); + print "Copyright (c) 2002 Subhendu Ghosh/Carlos Canau/Benjamin Schmid\n"; + print "Copyright (c) 2018 Bernd Arnold\n"; + print "\n"; + print_usage(); + print "\n"; + print " Checks the uptime of the system using $uptime_file\n"; + print "\n"; + print "-w (--warning) = Min. number of uptime to generate warning\n"; + print "-c (--critical) = Min. number of uptime to generate critical alert ( w < c )\n"; + print "-f (--for) = Show uptime in a pretty format (Running for x weeks, x days, ...)\n"; + print "-s (--since) = Show last boot in yyyy-mm-dd HH:MM:SS format (output from 'uptime -s')\n"; + print "-h (--help)\n"; + print "-V (--version)\n"; + print "-v (--verbose) = debugging output\n"; + print "\n\n"; + print "Note: -w and -c are required arguments.\n"; + print " You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n"; + print ""; + print "\n\n"; + support(); +} -- cgit v0.10-9-g596f From de0872e2d71caec807c659c7f518adcbefe7e665 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 30 May 2018 19:11:06 +0200 Subject: Replaced my values with macros diff --git a/plugins-scripts/check_uptime b/plugins-scripts/check_uptime index 4bc9528..09600df 100755 --- a/plugins-scripts/check_uptime +++ b/plugins-scripts/check_uptime @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!@PERL@ -w # check_uptime - check uptime to see how long the system is running. # @@ -29,14 +29,13 @@ use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c $status $state $msg); use FindBin; use lib "$FindBin::Bin"; -use lib "/usr/lib/monitoring-plugins/"; use utils qw(%ERRORS &print_revision &support &usage ); sub print_help (); sub print_usage (); sub process_arguments (); -#$ENV{'PATH'}='/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin'; +$ENV{'PATH'}='@TRUSTED_PATH@'; $ENV{'BASH_ENV'}=''; $ENV{'ENV'}=''; $PROGNAME = "check_uptime"; @@ -158,7 +157,7 @@ sub process_arguments(){ ); if ($opt_V) { - print_revision($PROGNAME,'2.2'); + print_revision($PROGNAME,'@NP_VERSION@'); exit $ERRORS{'UNKNOWN'}; } @@ -232,7 +231,7 @@ sub print_usage () { } sub print_help () { - print_revision($PROGNAME,'2.2'); + print_revision($PROGNAME,'@NP_VERSION@'); print "Copyright (c) 2002 Subhendu Ghosh/Carlos Canau/Benjamin Schmid\n"; print "Copyright (c) 2018 Bernd Arnold\n"; print "\n"; -- cgit v0.10-9-g596f From 44816b4979cdad1698179e749726b8f45e5587d2 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 3 Jun 2018 16:05:54 +0200 Subject: Rename to .pl All other check script also have the .pl ending diff --git a/plugins-scripts/check_uptime b/plugins-scripts/check_uptime deleted file mode 100755 index 09600df..0000000 --- a/plugins-scripts/check_uptime +++ /dev/null @@ -1,255 +0,0 @@ -#!@PERL@ -w - -# check_uptime - check uptime to see how long the system is running. -# - -# License Information: -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 -# USA -# -############################################################################ - -use POSIX; -use strict; -use Getopt::Long; -use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c - $opt_f $opt_s - $status $state $msg); -use FindBin; -use lib "$FindBin::Bin"; -use utils qw(%ERRORS &print_revision &support &usage ); - -sub print_help (); -sub print_usage (); -sub process_arguments (); - -$ENV{'PATH'}='@TRUSTED_PATH@'; -$ENV{'BASH_ENV'}=''; -$ENV{'ENV'}=''; -$PROGNAME = "check_uptime"; -$state = $ERRORS{'UNKNOWN'}; - - -# Process arguments - -Getopt::Long::Configure('bundling'); -$status = process_arguments(); -if ($status){ - print "ERROR: processing arguments\n"; - exit $ERRORS{"UNKNOWN"}; -} - - -# Get uptime info from file - -my $uptime_file = "/proc/uptime"; - -if ( ! -r $uptime_file ) { - print "ERROR: file '$uptime_file' is not readable\n"; - exit $ERRORS{"UNKNOWN"}; -} - -if ( ! open FILE, "<", $uptime_file ) { - print "ERROR: cannot read from file '$uptime_file'\n"; - exit $ERRORS{"UNKNOWN"}; -} - -chomp( my $file_content = ); -close FILE; - -print "$uptime_file: $file_content\n" if $verbose; - -# Get first digit value (without fraction) -my ( $uptime_seconds ) = $file_content =~ /^([\d]+)/; - -# Bail out if value is not numeric -if ( $uptime_seconds !~ /^\d+$/ ) { - print "ERROR: no numeric value: $uptime_seconds\n"; - exit $ERRORS{"UNKNOWN"}; -} - - -# Do calculations for a "pretty" format (2 weeks, 5 days, ...) - -my ( $secs, $mins, $hours, $days, $weeks ); -$secs = $uptime_seconds; -if ( $secs > 100 ) { - $mins = int( $secs / 60 ); - $secs -= $mins * 60; -} -if ( $mins > 100 ) { - $hours = int( $mins / 60 ); - $mins -= $hours * 60; -} -if ( $hours > 48 ) { - $days = int( $hours / 24 ); - $hours -= $days * 24; -} -if ( $days > 14 ) { - $weeks = int( $days / 7 ); - $days -= $weeks * 7; -} - -my $pretty_uptime = ""; -$pretty_uptime .= sprintf( "%d week%s, ", $weeks, $weeks == 1 ? "" : "s" ) if $weeks; -$pretty_uptime .= sprintf( "%d day%s, ", $days, $days == 1 ? "" : "s" ) if $days; -$pretty_uptime .= sprintf( "%d hour%s, ", $hours, $hours == 1 ? "" : "s" ) if $hours; -$pretty_uptime .= sprintf( "%d minute%s, ", $mins, $mins == 1 ? "" : "s" ) if $mins; -# Replace last occurence of comma with "and" -$pretty_uptime =~ s/, $/ and /; -# Always print the seconds (though it may be 0 seconds) -$pretty_uptime .= sprintf( "%d second%s", $secs, $secs == 1 ? "" : "s" ); - - -# Default to catch errors in program -my $state_str = "UNKNOWN"; - -# Check values -if ( $uptime_seconds > $opt_c ) { - $state_str = "CRITICAL"; -} elsif ( $uptime_seconds > $opt_w ) { - $state_str = "WARNING"; -} else { - $state_str = "OK"; -} - -$msg = "$state_str: "; - -$msg .= "uptime is $uptime_seconds seconds. "; -$msg .= "Running for $pretty_uptime. " if $opt_f; -if ( $opt_s ) { - chomp( my $up_since = `uptime -s` ); - $msg .= "Running since $up_since. "; -} - -$state = $ERRORS{$state_str}; - -# Perfdata support -print "$msg|uptime=$uptime_seconds;$opt_w;$opt_c;0\n"; -exit $state; - - -##################################### -#### subs - - -sub process_arguments(){ - GetOptions - ("V" => \$opt_V, "version" => \$opt_V, - "v" => \$opt_v, "verbose" => \$opt_v, - "h" => \$opt_h, "help" => \$opt_h, - "w=s" => \$opt_w, "warning=s" => \$opt_w, # warning if above this number - "c=s" => \$opt_c, "critical=s" => \$opt_c, # critical if above this number - "f" => \$opt_f, "for" => \$opt_f, # show "running for ..." - "s" => \$opt_s, "since" => \$opt_s, # show "running since ..." - ); - - if ($opt_V) { - print_revision($PROGNAME,'@NP_VERSION@'); - exit $ERRORS{'UNKNOWN'}; - } - - if ($opt_h) { - print_help(); - exit $ERRORS{'UNKNOWN'}; - } - - if (defined $opt_v) { - $verbose = $opt_v; - } - - unless ( defined $opt_w && defined $opt_c ) { - print_usage(); - exit $ERRORS{'UNKNOWN'}; - } - - # Check if suffix is present - # Calculate parameter to seconds (to get an integer value finally) - # s = seconds - # m = minutes - # h = hours - # d = days - # w = weeks - my %factor = ( "s" => 1, - "m" => 60, - "h" => 60 * 60, - "d" => 60 * 60 * 24, - "w" => 60 * 60 * 24 * 7, - ); - if ( $opt_w =~ /^(\d+)([a-z])$/ ) { - my $value = $1; - my $suffix = $2; - print "warning: value=$value, suffix=$suffix\n" if $verbose; - if ( ! defined $factor{$suffix} ) { - print "Error: wrong suffix ($suffix) for warning"; - exit $ERRORS{'UNKNOWN'}; - } - $opt_w = $value * $factor{$suffix}; - } - if ( $opt_c =~ /^(\d+)([a-z])$/ ) { - my $value = $1; - my $suffix = $2; - print "critical: value=$value, suffix=$suffix\n" if $verbose; - if ( ! defined $factor{$suffix} ) { - print "Error: wrong suffix ($suffix) for critical"; - exit $ERRORS{'UNKNOWN'}; - } - $opt_c = $value * $factor{$suffix}; - } - - if ( $opt_w !~ /^\d+$/ ) { - print "Warning (-w) is not numeric\n"; - exit $ERRORS{'UNKNOWN'}; - } - if ( $opt_c !~ /^\d+$/ ) { - print "Critical (-c) is not numeric\n"; - exit $ERRORS{'UNKNOWN'}; - } - - if ( $opt_w >= $opt_c) { - print "Warning (-w) cannot be greater than Critical (-c)!\n"; - exit $ERRORS{'UNKNOWN'}; - } - - return $ERRORS{'OK'}; -} - -sub print_usage () { - print "Usage: $PROGNAME -w -c [-v]\n"; -} - -sub print_help () { - print_revision($PROGNAME,'@NP_VERSION@'); - print "Copyright (c) 2002 Subhendu Ghosh/Carlos Canau/Benjamin Schmid\n"; - print "Copyright (c) 2018 Bernd Arnold\n"; - print "\n"; - print_usage(); - print "\n"; - print " Checks the uptime of the system using $uptime_file\n"; - print "\n"; - print "-w (--warning) = Min. number of uptime to generate warning\n"; - print "-c (--critical) = Min. number of uptime to generate critical alert ( w < c )\n"; - print "-f (--for) = Show uptime in a pretty format (Running for x weeks, x days, ...)\n"; - print "-s (--since) = Show last boot in yyyy-mm-dd HH:MM:SS format (output from 'uptime -s')\n"; - print "-h (--help)\n"; - print "-V (--version)\n"; - print "-v (--verbose) = debugging output\n"; - print "\n\n"; - print "Note: -w and -c are required arguments.\n"; - print " You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n"; - print ""; - print "\n\n"; - support(); -} diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl new file mode 100755 index 0000000..09600df --- /dev/null +++ b/plugins-scripts/check_uptime.pl @@ -0,0 +1,255 @@ +#!@PERL@ -w + +# check_uptime - check uptime to see how long the system is running. +# + +# License Information: +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 +# USA +# +############################################################################ + +use POSIX; +use strict; +use Getopt::Long; +use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c + $opt_f $opt_s + $status $state $msg); +use FindBin; +use lib "$FindBin::Bin"; +use utils qw(%ERRORS &print_revision &support &usage ); + +sub print_help (); +sub print_usage (); +sub process_arguments (); + +$ENV{'PATH'}='@TRUSTED_PATH@'; +$ENV{'BASH_ENV'}=''; +$ENV{'ENV'}=''; +$PROGNAME = "check_uptime"; +$state = $ERRORS{'UNKNOWN'}; + + +# Process arguments + +Getopt::Long::Configure('bundling'); +$status = process_arguments(); +if ($status){ + print "ERROR: processing arguments\n"; + exit $ERRORS{"UNKNOWN"}; +} + + +# Get uptime info from file + +my $uptime_file = "/proc/uptime"; + +if ( ! -r $uptime_file ) { + print "ERROR: file '$uptime_file' is not readable\n"; + exit $ERRORS{"UNKNOWN"}; +} + +if ( ! open FILE, "<", $uptime_file ) { + print "ERROR: cannot read from file '$uptime_file'\n"; + exit $ERRORS{"UNKNOWN"}; +} + +chomp( my $file_content = ); +close FILE; + +print "$uptime_file: $file_content\n" if $verbose; + +# Get first digit value (without fraction) +my ( $uptime_seconds ) = $file_content =~ /^([\d]+)/; + +# Bail out if value is not numeric +if ( $uptime_seconds !~ /^\d+$/ ) { + print "ERROR: no numeric value: $uptime_seconds\n"; + exit $ERRORS{"UNKNOWN"}; +} + + +# Do calculations for a "pretty" format (2 weeks, 5 days, ...) + +my ( $secs, $mins, $hours, $days, $weeks ); +$secs = $uptime_seconds; +if ( $secs > 100 ) { + $mins = int( $secs / 60 ); + $secs -= $mins * 60; +} +if ( $mins > 100 ) { + $hours = int( $mins / 60 ); + $mins -= $hours * 60; +} +if ( $hours > 48 ) { + $days = int( $hours / 24 ); + $hours -= $days * 24; +} +if ( $days > 14 ) { + $weeks = int( $days / 7 ); + $days -= $weeks * 7; +} + +my $pretty_uptime = ""; +$pretty_uptime .= sprintf( "%d week%s, ", $weeks, $weeks == 1 ? "" : "s" ) if $weeks; +$pretty_uptime .= sprintf( "%d day%s, ", $days, $days == 1 ? "" : "s" ) if $days; +$pretty_uptime .= sprintf( "%d hour%s, ", $hours, $hours == 1 ? "" : "s" ) if $hours; +$pretty_uptime .= sprintf( "%d minute%s, ", $mins, $mins == 1 ? "" : "s" ) if $mins; +# Replace last occurence of comma with "and" +$pretty_uptime =~ s/, $/ and /; +# Always print the seconds (though it may be 0 seconds) +$pretty_uptime .= sprintf( "%d second%s", $secs, $secs == 1 ? "" : "s" ); + + +# Default to catch errors in program +my $state_str = "UNKNOWN"; + +# Check values +if ( $uptime_seconds > $opt_c ) { + $state_str = "CRITICAL"; +} elsif ( $uptime_seconds > $opt_w ) { + $state_str = "WARNING"; +} else { + $state_str = "OK"; +} + +$msg = "$state_str: "; + +$msg .= "uptime is $uptime_seconds seconds. "; +$msg .= "Running for $pretty_uptime. " if $opt_f; +if ( $opt_s ) { + chomp( my $up_since = `uptime -s` ); + $msg .= "Running since $up_since. "; +} + +$state = $ERRORS{$state_str}; + +# Perfdata support +print "$msg|uptime=$uptime_seconds;$opt_w;$opt_c;0\n"; +exit $state; + + +##################################### +#### subs + + +sub process_arguments(){ + GetOptions + ("V" => \$opt_V, "version" => \$opt_V, + "v" => \$opt_v, "verbose" => \$opt_v, + "h" => \$opt_h, "help" => \$opt_h, + "w=s" => \$opt_w, "warning=s" => \$opt_w, # warning if above this number + "c=s" => \$opt_c, "critical=s" => \$opt_c, # critical if above this number + "f" => \$opt_f, "for" => \$opt_f, # show "running for ..." + "s" => \$opt_s, "since" => \$opt_s, # show "running since ..." + ); + + if ($opt_V) { + print_revision($PROGNAME,'@NP_VERSION@'); + exit $ERRORS{'UNKNOWN'}; + } + + if ($opt_h) { + print_help(); + exit $ERRORS{'UNKNOWN'}; + } + + if (defined $opt_v) { + $verbose = $opt_v; + } + + unless ( defined $opt_w && defined $opt_c ) { + print_usage(); + exit $ERRORS{'UNKNOWN'}; + } + + # Check if suffix is present + # Calculate parameter to seconds (to get an integer value finally) + # s = seconds + # m = minutes + # h = hours + # d = days + # w = weeks + my %factor = ( "s" => 1, + "m" => 60, + "h" => 60 * 60, + "d" => 60 * 60 * 24, + "w" => 60 * 60 * 24 * 7, + ); + if ( $opt_w =~ /^(\d+)([a-z])$/ ) { + my $value = $1; + my $suffix = $2; + print "warning: value=$value, suffix=$suffix\n" if $verbose; + if ( ! defined $factor{$suffix} ) { + print "Error: wrong suffix ($suffix) for warning"; + exit $ERRORS{'UNKNOWN'}; + } + $opt_w = $value * $factor{$suffix}; + } + if ( $opt_c =~ /^(\d+)([a-z])$/ ) { + my $value = $1; + my $suffix = $2; + print "critical: value=$value, suffix=$suffix\n" if $verbose; + if ( ! defined $factor{$suffix} ) { + print "Error: wrong suffix ($suffix) for critical"; + exit $ERRORS{'UNKNOWN'}; + } + $opt_c = $value * $factor{$suffix}; + } + + if ( $opt_w !~ /^\d+$/ ) { + print "Warning (-w) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; + } + if ( $opt_c !~ /^\d+$/ ) { + print "Critical (-c) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; + } + + if ( $opt_w >= $opt_c) { + print "Warning (-w) cannot be greater than Critical (-c)!\n"; + exit $ERRORS{'UNKNOWN'}; + } + + return $ERRORS{'OK'}; +} + +sub print_usage () { + print "Usage: $PROGNAME -w -c [-v]\n"; +} + +sub print_help () { + print_revision($PROGNAME,'@NP_VERSION@'); + print "Copyright (c) 2002 Subhendu Ghosh/Carlos Canau/Benjamin Schmid\n"; + print "Copyright (c) 2018 Bernd Arnold\n"; + print "\n"; + print_usage(); + print "\n"; + print " Checks the uptime of the system using $uptime_file\n"; + print "\n"; + print "-w (--warning) = Min. number of uptime to generate warning\n"; + print "-c (--critical) = Min. number of uptime to generate critical alert ( w < c )\n"; + print "-f (--for) = Show uptime in a pretty format (Running for x weeks, x days, ...)\n"; + print "-s (--since) = Show last boot in yyyy-mm-dd HH:MM:SS format (output from 'uptime -s')\n"; + print "-h (--help)\n"; + print "-V (--version)\n"; + print "-v (--verbose) = debugging output\n"; + print "\n\n"; + print "Note: -w and -c are required arguments.\n"; + print " You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n"; + print ""; + print "\n\n"; + support(); +} -- cgit v0.10-9-g596f From d5fbf8ae93c511e9bb9e0ee4304625d4b4023622 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 3 Jun 2018 16:42:34 +0200 Subject: Added suffix "s" for seconds in perfdata output diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 09600df..8c1f3d2 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -137,7 +137,7 @@ if ( $opt_s ) { $state = $ERRORS{$state_str}; # Perfdata support -print "$msg|uptime=$uptime_seconds;$opt_w;$opt_c;0\n"; +print "$msg|uptime=${uptime_seconds}s;$opt_w;$opt_c;0\n"; exit $state; -- cgit v0.10-9-g596f From 250adb31ef1849adea8b3bd7f66e92df1bbdd431 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 3 Jun 2018 16:51:43 +0200 Subject: Added test file diff --git a/plugins-scripts/t/check_uptime.t b/plugins-scripts/t/check_uptime.t new file mode 100644 index 0000000..410a080 --- /dev/null +++ b/plugins-scripts/t/check_uptime.t @@ -0,0 +1,73 @@ +#!/usr/bin/perl -w -I .. +# +# check_uptime tests +# +# + +use strict; +use Test::More tests => 21; +use NPTest; + +my $result; + +$result = NPTest->testCmd( + "./check_uptime" + ); +cmp_ok( $result->return_code, '==', 3, "Missing parameters" ); +like ( $result->output, '/^Usage: check_uptime -w/', "Output for missing parameters correct" ); + +$result = NPTest->testCmd( + "./check_uptime --help" + ); +cmp_ok( $result->return_code, '==', 3, "Help output requested" ); +like ( $result->output, '/ABSOLUTELY NO WARRANTY/', "Output for help correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 5 -c 2" + ); +cmp_ok( $result->return_code, '==', 3, "Warning greater than critical" ); +like ( $result->output, '/^Warning .*cannot be greater than Critical/', "Output for warning greater than critical correct" ); + +$result = NPTest->testCmd( + "./check_uptime -c 1000 -W 100 2>&1" + ); +like ( $result->output, '/^Unknown option: W/', "Output with wrong parameter is correct" ); + +$result = NPTest->testCmd( + "./check_uptime -f -w 1 -c 2" + ); +cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" ); +like ( $result->output, '/Running for \d+/', "Output for the f parameter correct" ); + +$result = NPTest->testCmd( + "./check_uptime -s -w 1 -c 2" + ); +cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" ); +like ( $result->output, '/Running since \d+/', "Output for the s parameter correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 1 -c 2" + ); +cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" ); +like ( $result->output, '/^CRITICAL: uptime is \d+ seconds/', "Output for uptime higher than 2 seconds correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 1 -c 9999w" + ); +cmp_ok( $result->return_code, '==', 1, "Uptime lower than 9999 weeks" ); +like ( $result->output, '/^WARNING: uptime is \d+ seconds/', "Output for uptime lower than 9999 weeks correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 9998w -c 9999w" + ); +cmp_ok( $result->return_code, '==', 0, "Uptime lower than 9998 weeks" ); +like ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 9998 weeks correct" ); +like ( $result->output, '/\|uptime=[0-9]+s;6046790400;6047395200;/', "Checking for performance output" ); + +$result = NPTest->testCmd( + "./check_uptime -w 111222d -c 222333d" + ); +cmp_ok( $result->return_code, '==', 0, "Uptime lower than 111222 days" ); +like ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 111222 days correct" ); +like ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" ); + -- cgit v0.10-9-g596f From 554b702f9d65fdfe640f20633543e00cd79d64ac Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 3 Jun 2018 20:55:42 +0200 Subject: Fix: uptime_file variable was declared too late When called with --help, the following error was shown: Use of uninitialized value $uptime_file in concatenation (.) or string at diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 8c1f3d2..27dc93f 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -1,4 +1,4 @@ -#!@PERL@ -w +#!/usr/bin/perl -w # check_uptime - check uptime to see how long the system is running. # @@ -41,6 +41,8 @@ $ENV{'ENV'}=''; $PROGNAME = "check_uptime"; $state = $ERRORS{'UNKNOWN'}; +my $uptime_file = "/proc/uptime"; + # Process arguments @@ -54,8 +56,6 @@ if ($status){ # Get uptime info from file -my $uptime_file = "/proc/uptime"; - if ( ! -r $uptime_file ) { print "ERROR: file '$uptime_file' is not readable\n"; exit $ERRORS{"UNKNOWN"}; -- cgit v0.10-9-g596f From 5a73671ec6299c480c90ec5b9f0f3d58397fbcfb Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sat, 9 Jun 2018 10:02:23 +0200 Subject: Fix: Initialize values Otherwise, there's a warning about unitialized values: Use of uninitialized value $hours in numeric gt (>) at ... Use of uninitialized value $days in numeric gt (>) at ... diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 27dc93f..20234c8 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -85,6 +85,7 @@ if ( $uptime_seconds !~ /^\d+$/ ) { my ( $secs, $mins, $hours, $days, $weeks ); $secs = $uptime_seconds; +$mins = $hours = $days = $weeks = 0; if ( $secs > 100 ) { $mins = int( $secs / 60 ); $secs -= $mins * 60; -- cgit v0.10-9-g596f From 9ee884b3de6c95f871a714dfc67cfb9b5e11724f Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 13 Jun 2018 15:57:16 +0200 Subject: Fix: Use macro for perl binary I've messed that up in the previous commit 554b702f9d65fdfe640f20633543e00cd79d64ac. diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 20234c8..8817030 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!@PERL@ -w # check_uptime - check uptime to see how long the system is running. # -- cgit v0.10-9-g596f From a784b19d6fc193e4c98ec6b2248bf4e252a9a0d7 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 13 Jun 2018 16:10:17 +0200 Subject: Modified alignment diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 8817030..2b230f5 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -192,7 +192,7 @@ sub process_arguments(){ if ( $opt_w =~ /^(\d+)([a-z])$/ ) { my $value = $1; my $suffix = $2; - print "warning: value=$value, suffix=$suffix\n" if $verbose; + print "warning: value=$value, suffix=$suffix\n" if $verbose; if ( ! defined $factor{$suffix} ) { print "Error: wrong suffix ($suffix) for warning"; exit $ERRORS{'UNKNOWN'}; @@ -202,7 +202,7 @@ sub process_arguments(){ if ( $opt_c =~ /^(\d+)([a-z])$/ ) { my $value = $1; my $suffix = $2; - print "critical: value=$value, suffix=$suffix\n" if $verbose; + print "critical: value=$value, suffix=$suffix\n" if $verbose; if ( ! defined $factor{$suffix} ) { print "Error: wrong suffix ($suffix) for critical"; exit $ERRORS{'UNKNOWN'}; -- cgit v0.10-9-g596f From db499b6f5b82aff65171ac4cfa5b936ba1e5e5ad Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 13 Jun 2018 16:56:22 +0200 Subject: Introducing ranges for warning and critical Works as before: -w 1w -c 2w New (as before, but also warn if uptime < 5m, and crit if uptime < 2m): -w 5m:1w -c 2m:2w (idea by @sni) Also refactored the time calculation, if a suffix is present: New sub calc_as_seconds($) diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 2b230f5..f2b47be 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -26,6 +26,8 @@ use strict; use Getopt::Long; use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c $opt_f $opt_s + $lower_warn_threshold $upper_warn_threshold + $lower_crit_threshold $upper_crit_threshold $status $state $msg); use FindBin; use lib "$FindBin::Bin"; @@ -118,10 +120,19 @@ $pretty_uptime .= sprintf( "%d second%s", $secs, $secs == 1 ? "" : "s" ); my $state_str = "UNKNOWN"; # Check values -if ( $uptime_seconds > $opt_c ) { +my $out_of_bounds_text = ""; +if ( $uptime_seconds > $upper_crit_threshold ) { $state_str = "CRITICAL"; -} elsif ( $uptime_seconds > $opt_w ) { + $out_of_bounds_text = "Exceeds upper crit threshold"; +} elsif ( $uptime_seconds < $lower_crit_threshold ) { + $state_str = "CRITICAL"; + $out_of_bounds_text = "Exceeds lower crit threshold"; +} elsif ( $uptime_seconds > $upper_warn_threshold ) { + $state_str = "WARNING"; + $out_of_bounds_text = "Exceeds upper warn threshold"; +} elsif ( $uptime_seconds < $lower_warn_threshold ) { $state_str = "WARNING"; + $out_of_bounds_text = "Exceeds lower warn threshold"; } else { $state_str = "OK"; } @@ -129,6 +140,7 @@ if ( $uptime_seconds > $opt_c ) { $msg = "$state_str: "; $msg .= "uptime is $uptime_seconds seconds. "; +$msg .= "$out_of_bounds_text. " if $out_of_bounds_text; $msg .= "Running for $pretty_uptime. " if $opt_f; if ( $opt_s ) { chomp( my $up_since = `uptime -s` ); @@ -138,7 +150,7 @@ if ( $opt_s ) { $state = $ERRORS{$state_str}; # Perfdata support -print "$msg|uptime=${uptime_seconds}s;$opt_w;$opt_c;0\n"; +print "$msg|uptime=${uptime_seconds}s;$upper_warn_threshold;$upper_crit_threshold;0\n"; exit $state; @@ -176,51 +188,56 @@ sub process_arguments(){ exit $ERRORS{'UNKNOWN'}; } - # Check if suffix is present - # Calculate parameter to seconds (to get an integer value finally) - # s = seconds - # m = minutes - # h = hours - # d = days - # w = weeks - my %factor = ( "s" => 1, - "m" => 60, - "h" => 60 * 60, - "d" => 60 * 60 * 24, - "w" => 60 * 60 * 24 * 7, - ); - if ( $opt_w =~ /^(\d+)([a-z])$/ ) { - my $value = $1; - my $suffix = $2; - print "warning: value=$value, suffix=$suffix\n" if $verbose; - if ( ! defined $factor{$suffix} ) { - print "Error: wrong suffix ($suffix) for warning"; - exit $ERRORS{'UNKNOWN'}; - } - $opt_w = $value * $factor{$suffix}; + # Check if a range was supplied ("lowvalue:highvalue") for warning and critical + # Otherwise, set 0 as the lower threshold and the parameter value as upper threshold + # (the uptime should always be positive, so there should be no issue) + if ( $opt_w =~ /^(.+):(.+)$/ ) { + $lower_warn_threshold = $1; + $upper_warn_threshold = $2; + } else { + $lower_warn_threshold = 0; + $upper_warn_threshold = $opt_w; + } + if ( $opt_c =~ /^(.+):(.+)$/ ) { + $lower_crit_threshold = $1; + $upper_crit_threshold = $2; + } else { + $lower_crit_threshold = 0; + $upper_crit_threshold = $opt_c; + } + + # Set as seconds (calculate if suffix present) + $lower_warn_threshold = calc_as_seconds( $lower_warn_threshold ); + $lower_crit_threshold = calc_as_seconds( $lower_crit_threshold ); + $upper_warn_threshold = calc_as_seconds( $upper_warn_threshold ); + $upper_crit_threshold = calc_as_seconds( $upper_crit_threshold ); + + # Check for numeric value of warning parameter + if ( $lower_warn_threshold !~ /^\d+$/ ) { + print "Lower warning (-w) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; } - if ( $opt_c =~ /^(\d+)([a-z])$/ ) { - my $value = $1; - my $suffix = $2; - print "critical: value=$value, suffix=$suffix\n" if $verbose; - if ( ! defined $factor{$suffix} ) { - print "Error: wrong suffix ($suffix) for critical"; - exit $ERRORS{'UNKNOWN'}; - } - $opt_c = $value * $factor{$suffix}; + if ( $upper_warn_threshold !~ /^\d+$/ ) { + print "Upper warning (-w) is not numeric\n"; + exit $ERRORS{'UNKNOWN'}; } - - if ( $opt_w !~ /^\d+$/ ) { - print "Warning (-w) is not numeric\n"; + # Check for numeric value of critical parameter + if ( $lower_crit_threshold !~ /^\d+$/ ) { + print "Lower critical (-c) is not numeric\n"; exit $ERRORS{'UNKNOWN'}; } - if ( $opt_c !~ /^\d+$/ ) { - print "Critical (-c) is not numeric\n"; + if ( $upper_crit_threshold !~ /^\d+$/ ) { + print "Upper critical (-c) is not numeric\n"; exit $ERRORS{'UNKNOWN'}; } - if ( $opt_w >= $opt_c) { - print "Warning (-w) cannot be greater than Critical (-c)!\n"; + # Check boundaries + if ( $upper_warn_threshold >= $upper_crit_threshold ) { + print "Upper Warning (-w) cannot be greater than Critical (-c)!\n"; + exit $ERRORS{'UNKNOWN'}; + } + if ( $lower_warn_threshold < $lower_crit_threshold ) { + print "Lower Warning (-w) cannot be greater than Critical (-c)!\n"; exit $ERRORS{'UNKNOWN'}; } @@ -254,3 +271,39 @@ sub print_help () { print "\n\n"; support(); } + +sub calc_as_seconds () { + + my $parameter = shift; + + # Check if suffix is present + # Calculate parameter to seconds (to get an integer value finally) + # If no suffix is present, just return the value + + # Possible suffixes: + # s = seconds + # m = minutes + # h = hours + # d = days + # w = weeks + my %factor = ( "s" => 1, + "m" => 60, + "h" => 60 * 60, + "d" => 60 * 60 * 24, + "w" => 60 * 60 * 24 * 7, + ); + + if ( $parameter =~ /^(\d+)([a-z])$/ ) { + my $value = $1; + my $suffix = $2; + print "detected: value=$value, suffix=$suffix\n" if $verbose; + if ( ! defined $factor{$suffix} ) { + print "Error: wrong suffix ($suffix) for value '$parameter'"; + exit $ERRORS{'UNKNOWN'}; + } + $parameter = $value * $factor{$suffix}; + } + + return $parameter; + +} diff --git a/plugins-scripts/t/check_uptime.t b/plugins-scripts/t/check_uptime.t index 410a080..4606718 100644 --- a/plugins-scripts/t/check_uptime.t +++ b/plugins-scripts/t/check_uptime.t @@ -26,7 +26,7 @@ $result = NPTest->testCmd( "./check_uptime -w 5 -c 2" ); cmp_ok( $result->return_code, '==', 3, "Warning greater than critical" ); -like ( $result->output, '/^Warning .*cannot be greater than Critical/', "Output for warning greater than critical correct" ); +like ( $result->output, '/^Upper Warning .*cannot be greater than Critical/', "Output for warning greater than critical correct" ); $result = NPTest->testCmd( "./check_uptime -c 1000 -W 100 2>&1" -- cgit v0.10-9-g596f From 558090a7d884a265aa909d894672154892a0baae Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 13 Jun 2018 17:13:20 +0200 Subject: Added tests for range values diff --git a/plugins-scripts/t/check_uptime.t b/plugins-scripts/t/check_uptime.t index 4606718..c395307 100644 --- a/plugins-scripts/t/check_uptime.t +++ b/plugins-scripts/t/check_uptime.t @@ -5,7 +5,7 @@ # use strict; -use Test::More tests => 21; +use Test::More tests => 40; use NPTest; my $result; @@ -71,3 +71,59 @@ cmp_ok( $result->return_code, '==', 0, "Uptime lower than 111222 days" ); like ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 111222 days correct" ); like ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" ); +# Same as before, hopefully uptime is higher than 2 seconds so no warning +$result = NPTest->testCmd( + "./check_uptime -w 2:111222d -c 1:222333d" + ); +cmp_ok( $result->return_code, '==', 0, "Uptime lower than 111222 days, and higher 2 seconds" ); +like ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 111222 days, and higher 2 seconds correct" ); +like ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" ); + +# Same as before, now the low warning should trigger +$result = NPTest->testCmd( + "./check_uptime -w 111221d:111222d -c 1:222333d" + ); +cmp_ok( $result->return_code, '==', 1, "Uptime lower than 111221 days raises warning" ); +like ( $result->output, '/^WARNING: uptime is \d+ seconds/', "Output for uptime lower than 111221 days correct" ); +like ( $result->output, '/Exceeds lower warn threshold/', "Exceeds text correct" ); +like ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" ); + +# Same as before, now the low critical should trigger +$result = NPTest->testCmd( + "./check_uptime -w 111221d:111222d -c 111220d:222333d" + ); +cmp_ok( $result->return_code, '==', 2, "Uptime lower than 111220 days raises critical" ); +like ( $result->output, '/^CRITICAL: uptime is \d+ seconds/', "Output for uptime lower than 111220 days correct" ); +like ( $result->output, '/Exceeds lower crit threshold/', "Exceeds text correct" ); +like ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" ); + + +# +# Range values using ":" without two parts ("a:b") is invalid +# Strings without two parts are always considered as upper threshold +# + +$result = NPTest->testCmd( + "./check_uptime -w 2: -c 1:4" + ); +cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" ); +like ( $result->output, '/^Upper warning .* is not numeric/', "Output for wrong parameter format correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 2:3 -c 1:" + ); +cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" ); +like ( $result->output, '/^Upper critical .* is not numeric/', "Output for wrong parameter format correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w :3 -c 1:4" + ); +cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" ); +like ( $result->output, '/^Upper warning .* is not numeric/', "Output for wrong parameter format correct" ); + +$result = NPTest->testCmd( + "./check_uptime -w 2:3 -c :4" + ); +cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" ); +like ( $result->output, '/^Upper critical .* is not numeric/', "Output for wrong parameter format correct" ); + -- cgit v0.10-9-g596f From cf157ef84502ed86b006fbb6289b7ec94e8f0eb3 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Wed, 13 Jun 2018 17:28:53 +0200 Subject: Refactoring Better alignment. Avoid duplications ("Exceeds ... threshold"). diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index f2b47be..1f844ff 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -107,9 +107,9 @@ if ( $days > 14 ) { my $pretty_uptime = ""; $pretty_uptime .= sprintf( "%d week%s, ", $weeks, $weeks == 1 ? "" : "s" ) if $weeks; -$pretty_uptime .= sprintf( "%d day%s, ", $days, $days == 1 ? "" : "s" ) if $days; +$pretty_uptime .= sprintf( "%d day%s, ", $days, $days == 1 ? "" : "s" ) if $days; $pretty_uptime .= sprintf( "%d hour%s, ", $hours, $hours == 1 ? "" : "s" ) if $hours; -$pretty_uptime .= sprintf( "%d minute%s, ", $mins, $mins == 1 ? "" : "s" ) if $mins; +$pretty_uptime .= sprintf( "%d minute%s, ", $mins, $mins == 1 ? "" : "s" ) if $mins; # Replace last occurence of comma with "and" $pretty_uptime =~ s/, $/ and /; # Always print the seconds (though it may be 0 seconds) @@ -123,16 +123,16 @@ my $state_str = "UNKNOWN"; my $out_of_bounds_text = ""; if ( $uptime_seconds > $upper_crit_threshold ) { $state_str = "CRITICAL"; - $out_of_bounds_text = "Exceeds upper crit threshold"; + $out_of_bounds_text = "upper crit"; } elsif ( $uptime_seconds < $lower_crit_threshold ) { $state_str = "CRITICAL"; - $out_of_bounds_text = "Exceeds lower crit threshold"; + $out_of_bounds_text = "lower crit"; } elsif ( $uptime_seconds > $upper_warn_threshold ) { $state_str = "WARNING"; - $out_of_bounds_text = "Exceeds upper warn threshold"; + $out_of_bounds_text = "upper warn"; } elsif ( $uptime_seconds < $lower_warn_threshold ) { $state_str = "WARNING"; - $out_of_bounds_text = "Exceeds lower warn threshold"; + $out_of_bounds_text = "lower warn"; } else { $state_str = "OK"; } @@ -140,7 +140,7 @@ if ( $uptime_seconds > $upper_crit_threshold ) { $msg = "$state_str: "; $msg .= "uptime is $uptime_seconds seconds. "; -$msg .= "$out_of_bounds_text. " if $out_of_bounds_text; +$msg .= "Exceeds $out_of_bounds_text threshold. " if $out_of_bounds_text; $msg .= "Running for $pretty_uptime. " if $opt_f; if ( $opt_s ) { chomp( my $up_since = `uptime -s` ); -- cgit v0.10-9-g596f From ae7c16306c9562d98caa843a550687cd618e36af Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 13 Jun 2018 20:23:07 +0200 Subject: add check_uptime to makefile diff --git a/plugins-scripts/Makefile.am b/plugins-scripts/Makefile.am index ea65aed..088a445 100644 --- a/plugins-scripts/Makefile.am +++ b/plugins-scripts/Makefile.am @@ -16,11 +16,13 @@ VPATH=$(top_srcdir) $(top_srcdir)/plugins-scripts $(top_srcdir)/plugins-scripts/ libexec_SCRIPTS = check_breeze check_disk_smb check_flexlm check_ircd \ check_log check_oracle check_rpc check_sensors check_wave \ check_ifstatus check_ifoperstatus check_mailq check_file_age \ + check_uptime \ utils.sh utils.pm EXTRA_DIST=check_breeze.pl check_disk_smb.pl check_flexlm.pl check_ircd.pl \ check_log.sh check_oracle.sh check_rpc.pl check_sensors.sh \ check_ifstatus.pl check_ifoperstatus.pl check_wave.pl check_mailq.pl check_file_age.pl \ + check_uptime.pl \ utils.sh.in utils.pm.in t EDIT = sed \ -- cgit v0.10-9-g596f From 0b9c85109b3b929993f0afa16cb069e67e94e872 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 13 Jun 2018 20:23:21 +0200 Subject: fix typo in check_uptime diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 1f844ff..9679a7c 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -124,7 +124,7 @@ my $out_of_bounds_text = ""; if ( $uptime_seconds > $upper_crit_threshold ) { $state_str = "CRITICAL"; $out_of_bounds_text = "upper crit"; -} elsif ( $uptime_seconds < $lower_crit_threshold ) { +} elsif ( $uptime_seconds < $lower_crit_threshold ) { $state_str = "CRITICAL"; $out_of_bounds_text = "lower crit"; } elsif ( $uptime_seconds > $upper_warn_threshold ) { -- cgit v0.10-9-g596f From b40d660bb38a7d43934c6c63962e3c50f524e55a Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 17 Jun 2018 09:19:55 +0200 Subject: Remove useless (empty) print diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 9679a7c..b91ceea 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -267,7 +267,6 @@ sub print_help () { print "\n\n"; print "Note: -w and -c are required arguments.\n"; print " You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n"; - print ""; print "\n\n"; support(); } -- cgit v0.10-9-g596f From 28f4d144f286e115eb2502c6c9e130d26eaba441 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 17 Jun 2018 09:20:16 +0200 Subject: Added help text for range support diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index b91ceea..0a13cc0 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -267,6 +267,12 @@ sub print_help () { print "\n\n"; print "Note: -w and -c are required arguments.\n"; print " You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n"; + print "\n"; + print "Range support: You may specify a range for both warning and critical thresholds.\n"; + print " This works without additional Perl modules.\n"; + print "Example: ./check_uptime -w 10m:4w -c 1m:8w\n"; + print " Results in a critical state when uptime is below 60 seconds or higher than 8 weeks,\n"; + print " and in a warning state when uptime is below 10 minutes or above 4 weeks.\n"; print "\n\n"; support(); } -- cgit v0.10-9-g596f From 37f9b45266acfeb45157d3c27a65979b33c57df7 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 17 Jun 2018 09:36:13 +0200 Subject: Drop uptime binary call No need to call /bin/uptime, since the string can be generated with strftime(...). diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index 0a13cc0..ed859ab 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -143,7 +143,7 @@ $msg .= "uptime is $uptime_seconds seconds. "; $msg .= "Exceeds $out_of_bounds_text threshold. " if $out_of_bounds_text; $msg .= "Running for $pretty_uptime. " if $opt_f; if ( $opt_s ) { - chomp( my $up_since = `uptime -s` ); + my $up_since = strftime( "%Y-%m-%d %H:%M:%S", localtime( time - $uptime_seconds ) ); $msg .= "Running since $up_since. "; } -- cgit v0.10-9-g596f From 6a8564fb44ab6914dcc8ec63e8af6477803da080 Mon Sep 17 00:00:00 2001 From: Bernd Arnold Date: Sun, 17 Jun 2018 09:42:25 +0200 Subject: Fixed error message, added comment diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl index ed859ab..4c9f22d 100755 --- a/plugins-scripts/check_uptime.pl +++ b/plugins-scripts/check_uptime.pl @@ -236,8 +236,9 @@ sub process_arguments(){ print "Upper Warning (-w) cannot be greater than Critical (-c)!\n"; exit $ERRORS{'UNKNOWN'}; } + # No "<=" since both values are zero if no range (only upper threshold values) is given if ( $lower_warn_threshold < $lower_crit_threshold ) { - print "Lower Warning (-w) cannot be greater than Critical (-c)!\n"; + print "Lower Warning (-w) cannot be less than Critical (-c)!\n"; exit $ERRORS{'UNKNOWN'}; } -- cgit v0.10-9-g596f From e60c6c04f04022a72bf3a1074402342e948c8c0f Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Wed, 25 Jul 2018 19:05:16 +0200 Subject: check_dns: simplify loop diff --git a/plugins/check_dns.c b/plugins/check_dns.c index f206163..ae4123b 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -168,8 +168,8 @@ main (int argc, char **argv) temp_buffer++; /* Strip leading spaces */ - for (; *temp_buffer != '\0' && *temp_buffer == ' '; temp_buffer++) - /* NOOP */; + while (*temp_buffer == ' ') + temp_buffer++; strip(temp_buffer); if (temp_buffer==NULL || strlen(temp_buffer)==0) { -- cgit v0.10-9-g596f From a03068743f3694cbdbe84bb6e802a41f270cc105 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Wed, 25 Jul 2018 20:18:47 +0200 Subject: check_dns: allow returned addresses to be in any order diff --git a/NEWS b/NEWS index 2db2a2c..ac06aa6 100644 --- a/NEWS +++ b/NEWS @@ -5,6 +5,7 @@ This file documents the major additions and syntax changes between releases. check_dns: allow 'expected address' (-a) to be specified in CIDR notation (IPv4 only). check_dns: allow for IPv6 RDNS + check_dns: allow unsorted addresses check_apt: add --only-critical switch check_apt: add -l/--list option to print packages diff --git a/THANKS.in b/THANKS.in index ebc8155..9bb4382 100644 --- a/THANKS.in +++ b/THANKS.in @@ -356,3 +356,4 @@ Sven Geggus Thomas Kurschel Yannick Charton Nicolai Søborg +Rolf Eike Beer diff --git a/plugins/check_dns.c b/plugins/check_dns.c index ae4123b..75a9dca 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -230,10 +230,15 @@ main (int argc, char **argv) temp_buffer = ""; for (i=0; i Date: Wed, 25 Jul 2018 21:14:47 +0200 Subject: check_dns: allow forcing complete match of all addresses diff --git a/NEWS b/NEWS index ac06aa6..0848705 100644 --- a/NEWS +++ b/NEWS @@ -6,6 +6,7 @@ This file documents the major additions and syntax changes between releases. (IPv4 only). check_dns: allow for IPv6 RDNS check_dns: allow unsorted addresses + check_dns: allow forcing complete match of all addresses check_apt: add --only-critical switch check_apt: add -l/--list option to print packages diff --git a/plugins/check_dns.c b/plugins/check_dns.c index 75a9dca..25bd31d 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -56,6 +56,7 @@ char **expected_address = NULL; int expected_address_cnt = 0; int expect_authority = FALSE; +int all_match = FALSE; thresholds *time_thresholds = NULL; static int @@ -228,6 +229,8 @@ main (int argc, char **argv) if (result == STATE_OK && expected_address_cnt > 0) { result = STATE_CRITICAL; temp_buffer = ""; + unsigned long expect_match = (1 << expected_address_cnt) - 1; + unsigned long addr_match = (1 << n_addresses) - 1; for (i=0; i Date: Sat, 29 Sep 2018 16:15:42 +0200 Subject: Avoid passing NULL to vprintf(). diff --git a/lib/utils_base.c b/lib/utils_base.c index 3822bcf..19a531f 100644 --- a/lib/utils_base.c +++ b/lib/utils_base.c @@ -87,10 +87,13 @@ void _get_monitoring_plugin( monitoring_plugin **pointer ){ void die (int result, const char *fmt, ...) { - va_list ap; - va_start (ap, fmt); - vprintf (fmt, ap); - va_end (ap); + if(fmt!=NULL) { + va_list ap; + va_start (ap, fmt); + vprintf (fmt, ap); + va_end (ap); + } + if(this_monitoring_plugin!=NULL) { np_cleanup(); } -- cgit v0.10-9-g596f From 22c00bbe47d2bed5e77ad1d494502c4697a86abb Mon Sep 17 00:00:00 2001 From: Stefan Bethke Date: Wed, 10 Oct 2018 00:40:07 +0200 Subject: Docs check_http: make -C obvious You need to read the docs carefully to realize that check_http has two modes of operation: the regular HTTP checks, and a TLS certificate check. Only one of these can be run in a single invocation. Fixes #1553 diff --git a/plugins/check_http.c b/plugins/check_http.c index 86a36c2..d540bf7 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -1532,6 +1532,10 @@ print_help (void) print_usage (); +#ifdef HAVE_SSL + printf (_("In the first form, make an HTTP request.")); + printf (_("In the second form, connect to the server and check the TLS certificate.")); +#endif printf (_("NOTE: One or both of -H and -I must be specified")); printf ("\n"); @@ -1688,6 +1692,8 @@ print_usage (void) printf (" [-b proxy_auth] [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); - printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); + printf (" [-A string] [-k string] [-S ] [--sni]\n"); printf (" [-T ] [-j method]\n"); + printf (" %s -H | -I -C [,]\n",progname); + printf (" [-p ] [-t ] [-4|-6] [--sni]\n"); } -- cgit v0.10-9-g596f From ec4ef097c265a8ae0711531e4f0b8b6ddf67bc74 Mon Sep 17 00:00:00 2001 From: Lucas Bussey <> Date: Sat, 13 Oct 2018 07:44:39 -0700 Subject: Added a compiled plugin script that was missing from gitignore diff --git a/.gitignore b/.gitignore index 3093c6e..0c16add 100644 --- a/.gitignore +++ b/.gitignore @@ -241,6 +241,7 @@ NP-VERSION-FILE /plugins-scripts/check_sensors /plugins-scripts/check_wave /plugins-scripts/check_file_age +/plugins-scripts/check_uptime # /po/ /po/Makefile -- cgit v0.10-9-g596f From 0b85260bd2d6b2fd62588c71daf44bc1156a632f Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 13 Jan 2017 10:48:45 +0100 Subject: added autoconf stuff for curl plugin, created empty plugin diff --git a/.gitignore b/.gitignore index 0c16add..91de2c7 100644 --- a/.gitignore +++ b/.gitignore @@ -142,6 +142,7 @@ NP-VERSION-FILE /plugins/check_by_ssh /plugins/check_clamd /plugins/check_cluster +/plugins/check_curl /plugins/check_dbi /plugins/check_dig /plugins/check_disk diff --git a/configure.ac b/configure.ac index bf12995..04ec5bd 100644 --- a/configure.ac +++ b/configure.ac @@ -385,6 +385,20 @@ if test "$ac_cv_header_wtsapi32_h" = "yes"; then AC_SUBST(WTSAPI32LIBS) fi +dnl Check for cURL library +LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ + EXTRAS="$EXTRAS check_curl\$(EXEEXT)" + LIBCURLINCLUDE="$LIBCURL_CPPFLAGS" + LIBCURLLIBS="$LIBCURL" + LIBCURLCFLAGS="$LIBCURL_CPPFLAGS" + AC_SUBST(LIBCURLINCLUDE) + AC_SUBST(LIBCURLLIBS) + AC_SUBST(LIBCURLCFLAGS) +], [ + AC_MSG_WARN([Skipping curl plugin]) + AC_MSG_WARN([install libcurl libs to compile this plugin (see REQUIREMENTS).]) +]) + dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface if test "$ac_cv_header_utmpx_h" = "no" -a "$ac_cv_header_wtsapi32_h" = "no" then @@ -1882,4 +1896,5 @@ ACX_FEATURE([enable],[perl-modules]) ACX_FEATURE([with],[cgiurl]) ACX_FEATURE([with],[trusted-path]) ACX_FEATURE([enable],[libtap]) +ACX_FEATURE([with],[libcurl]) diff --git a/m4/libcurl.m4 b/m4/libcurl.m4 new file mode 100644 index 0000000..53d694d --- /dev/null +++ b/m4/libcurl.m4 @@ -0,0 +1,272 @@ +#*************************************************************************** +# _ _ ____ _ +# Project ___| | | | _ \| | +# / __| | | | |_) | | +# | (__| |_| | _ <| |___ +# \___|\___/|_| \_\_____| +# +# Copyright (C) 2006, David Shaw +# +# This software is licensed as described in the file COPYING, which +# you should have received as part of this distribution. The terms +# are also available at https://curl.haxx.se/docs/copyright.html. +# +# You may opt to use, copy, modify, merge, publish, distribute and/or sell +# copies of the Software, and permit persons to whom the Software is +# furnished to do so, under the terms of the COPYING file. +# +# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY +# KIND, either express or implied. +# +########################################################################### +# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION], +# [ACTION-IF-YES], [ACTION-IF-NO]) +# ---------------------------------------------------------- +# David Shaw May-09-2006 +# +# Checks for libcurl. DEFAULT-ACTION is the string yes or no to +# specify whether to default to --with-libcurl or --without-libcurl. +# If not supplied, DEFAULT-ACTION is yes. MINIMUM-VERSION is the +# minimum version of libcurl to accept. Pass the version as a regular +# version number like 7.10.1. If not supplied, any version is +# accepted. ACTION-IF-YES is a list of shell commands to run if +# libcurl was successfully found and passed the various tests. +# ACTION-IF-NO is a list of shell commands that are run otherwise. +# Note that using --without-libcurl does run ACTION-IF-NO. +# +# This macro #defines HAVE_LIBCURL if a working libcurl setup is +# found, and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary +# values. Other useful defines are LIBCURL_FEATURE_xxx where xxx are +# the various features supported by libcurl, and LIBCURL_PROTOCOL_yyy +# where yyy are the various protocols supported by libcurl. Both xxx +# and yyy are capitalized. See the list of AH_TEMPLATEs at the top of +# the macro for the complete list of possible defines. Shell +# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also +# defined to 'yes' for those features and protocols that were found. +# Note that xxx and yyy keep the same capitalization as in the +# curl-config list (e.g. it's "HTTP" and not "http"). +# +# Users may override the detected values by doing something like: +# LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure +# +# For the sake of sanity, this macro assumes that any libcurl that is +# found is after version 7.7.2, the first version that included the +# curl-config script. Note that it is very important for people +# packaging binary versions of libcurl to include this script! +# Without curl-config, we can only guess what protocols are available, +# or use curl_version_info to figure it out at runtime. + +AC_DEFUN([LIBCURL_CHECK_CONFIG], +[ + AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL]) + AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4]) + AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6]) + AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz]) + AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS]) + AH_TEMPLATE([LIBCURL_FEATURE_IDN],[Defined if libcurl supports IDN]) + AH_TEMPLATE([LIBCURL_FEATURE_SSPI],[Defined if libcurl supports SSPI]) + AH_TEMPLATE([LIBCURL_FEATURE_NTLM],[Defined if libcurl supports NTLM]) + + AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS]) + AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE]) + AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET]) + AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT]) + AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_RTSP],[Defined if libcurl supports RTSP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_POP3],[Defined if libcurl supports POP3]) + AH_TEMPLATE([LIBCURL_PROTOCOL_IMAP],[Defined if libcurl supports IMAP]) + AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP]) + + AC_ARG_WITH(libcurl, + AS_HELP_STRING([--with-libcurl=PREFIX],[look for the curl library in PREFIX/lib and headers in PREFIX/include]), + [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])]) + + if test "$_libcurl_with" != "no" ; then + + AC_PROG_AWK + + _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'" + + _libcurl_try_link=yes + + if test -d "$_libcurl_with" ; then + LIBCURL_CPPFLAGS="-I$withval/include" + _libcurl_ldflags="-L$withval/lib" + AC_PATH_PROG([_libcurl_config],[curl-config],[], + ["$withval/bin"]) + else + AC_PATH_PROG([_libcurl_config],[curl-config],[],[$PATH]) + fi + + if test x$_libcurl_config != "x" ; then + AC_CACHE_CHECK([for the version of libcurl], + [libcurl_cv_lib_curl_version], + [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`]) + + _libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse` + _libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse` + + if test $_libcurl_wanted -gt 0 ; then + AC_CACHE_CHECK([for libcurl >= version $2], + [libcurl_cv_lib_version_ok], + [ + if test $_libcurl_version -ge $_libcurl_wanted ; then + libcurl_cv_lib_version_ok=yes + else + libcurl_cv_lib_version_ok=no + fi + ]) + fi + + if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then + if test x"$LIBCURL_CPPFLAGS" = "x" ; then + LIBCURL_CPPFLAGS=`$_libcurl_config --cflags` + fi + if test x"$LIBCURL" = "x" ; then + LIBCURL=`$_libcurl_config --libs` + + # This is so silly, but Apple actually has a bug in their + # curl-config script. Fixed in Tiger, but there are still + # lots of Panther installs around. + case "${host}" in + powerpc-apple-darwin7*) + LIBCURL=`echo $LIBCURL | sed -e 's|-arch i386||g'` + ;; + esac + fi + + # All curl-config scripts support --feature + _libcurl_features=`$_libcurl_config --feature` + + # Is it modern enough to have --protocols? (7.12.4) + if test $_libcurl_version -ge 461828 ; then + _libcurl_protocols=`$_libcurl_config --protocols` + fi + else + _libcurl_try_link=no + fi + + unset _libcurl_wanted + fi + + if test $_libcurl_try_link = yes ; then + + # we didn't find curl-config, so let's see if the user-supplied + # link line (or failing that, "-lcurl") is enough. + LIBCURL=${LIBCURL-"$_libcurl_ldflags -lcurl"} + + AC_CACHE_CHECK([whether libcurl is usable], + [libcurl_cv_lib_curl_usable], + [ + _libcurl_save_cppflags=$CPPFLAGS + CPPFLAGS="$LIBCURL_CPPFLAGS $CPPFLAGS" + _libcurl_save_libs=$LIBS + LIBS="$LIBCURL $LIBS" + + AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]],[[ +/* Try and use a few common options to force a failure if we are + missing symbols or can't link. */ +int x; +curl_easy_setopt(NULL,CURLOPT_URL,NULL); +x=CURL_ERROR_SIZE; +x=CURLOPT_WRITEFUNCTION; +x=CURLOPT_WRITEDATA; +x=CURLOPT_ERRORBUFFER; +x=CURLOPT_STDERR; +x=CURLOPT_VERBOSE; +if (x) {;} +]])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no) + + CPPFLAGS=$_libcurl_save_cppflags + LIBS=$_libcurl_save_libs + unset _libcurl_save_cppflags + unset _libcurl_save_libs + ]) + + if test $libcurl_cv_lib_curl_usable = yes ; then + + # Does curl_free() exist in this version of libcurl? + # If not, fake it with free() + + _libcurl_save_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS" + _libcurl_save_libs=$LIBS + LIBS="$LIBS $LIBCURL" + + AC_CHECK_FUNC(curl_free,, + AC_DEFINE(curl_free,free, + [Define curl_free() as free() if our version of curl lacks curl_free.])) + + CPPFLAGS=$_libcurl_save_cppflags + LIBS=$_libcurl_save_libs + unset _libcurl_save_cppflags + unset _libcurl_save_libs + + AC_DEFINE(HAVE_LIBCURL,1, + [Define to 1 if you have a functional curl library.]) + AC_SUBST(LIBCURL_CPPFLAGS) + AC_SUBST(LIBCURL) + + for _libcurl_feature in $_libcurl_features ; do + AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1]) + eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes + done + + if test "x$_libcurl_protocols" = "x" ; then + + # We don't have --protocols, so just assume that all + # protocols are available + _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT TFTP" + + if test x$libcurl_feature_SSL = xyes ; then + _libcurl_protocols="$_libcurl_protocols HTTPS" + + # FTPS wasn't standards-compliant until version + # 7.11.0 (0x070b00 == 461568) + if test $_libcurl_version -ge 461568; then + _libcurl_protocols="$_libcurl_protocols FTPS" + fi + fi + + # RTSP, IMAP, POP3 and SMTP were added in + # 7.20.0 (0x071400 == 463872) + if test $_libcurl_version -ge 463872; then + _libcurl_protocols="$_libcurl_protocols RTSP IMAP POP3 SMTP" + fi + fi + + for _libcurl_protocol in $_libcurl_protocols ; do + AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1]) + eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes + done + else + unset LIBCURL + unset LIBCURL_CPPFLAGS + fi + fi + + unset _libcurl_try_link + unset _libcurl_version_parse + unset _libcurl_config + unset _libcurl_feature + unset _libcurl_features + unset _libcurl_protocol + unset _libcurl_protocols + unset _libcurl_version + unset _libcurl_ldflags + fi + + if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then + # This is the IF-NO path + ifelse([$4],,:,[$4]) + else + # This is the IF-YES path + ifelse([$3],,:,[$3]) + fi + + unset _libcurl_with +])dnl diff --git a/plugins/Makefile.am b/plugins/Makefile.am index 0ddf9bd..2c87b4e 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -38,7 +38,7 @@ check_tcp_programs = check_ftp check_imap check_nntp check_pop \ EXTRA_PROGRAMS = check_mysql check_radius check_pgsql check_snmp check_hpjd \ check_swap check_fping check_ldap check_game check_dig \ check_nagios check_by_ssh check_dns check_nt check_ide_smart \ - check_procs check_mysql_query check_apt check_dbi + check_procs check_mysql_query check_apt check_dbi check_curl EXTRA_DIST = t tests @@ -69,6 +69,9 @@ test-debug: check_apt_LDADD = $(BASEOBJS) check_cluster_LDADD = $(BASEOBJS) +check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) +check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) +check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) check_dbi_LDADD = $(NETLIBS) $(DBILIBS) check_dig_LDADD = $(NETLIBS) check_disk_LDADD = $(BASEOBJS) diff --git a/plugins/check_curl.c b/plugins/check_curl.c new file mode 100644 index 0000000..be024fe --- /dev/null +++ b/plugins/check_curl.c @@ -0,0 +1,168 @@ +/***************************************************************************** +* +* Monitoring check_curl plugin +* +* License: GPL +* Copyright (c) 1999-2017 Monitoring Plugins Development Team +* +* Description: +* +* This file contains the check_curl plugin +* +* This plugin tests the HTTP service on the specified host. It can test +* normal (http) and secure (https) servers, follow redirects, search for +* strings and regular expressions, check connection times, and report on +* certificate expiration times. +* +* This plugin uses functions from the curl library, see +* http://curl.haxx.se +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 3 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +* +* +*****************************************************************************/ + +const char *progname = "check_curl"; +const char *copyright = "2006-2017"; +const char *email = "devel@monitoring-plugins.org"; + +#include "common.h" +#include "utils.h" + +#ifndef LIBCURL_PROTOCOL_HTTP +#error libcurl compiled without HTTP support, compiling check_curl plugin makes not much sense +#endif + +#include "curl/curl.h" +#include "curl/easy.h" + +int verbose = FALSE; +CURL *curl; + +int process_arguments (int, char **); +void print_help (void); +void print_usage (void); +void print_curl_version (void); + +int +main (int argc, char **argv) +{ + int result = STATE_UNKNOWN; + + setlocale (LC_ALL, ""); + bindtextdomain (PACKAGE, LOCALEDIR); + textdomain (PACKAGE); + + /* Parse extra opts if any */ + argv=np_extra_opts (&argc, argv, progname); + + if (process_arguments (argc, argv) == ERROR) + usage4 (_("Could not parse arguments")); + + if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) + die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_global_init failed\n"); + + if ((curl = curl_easy_init()) == NULL) + die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); + + curl_easy_cleanup (curl); + curl_global_cleanup (); + + return result; +} + +int +process_arguments (int argc, char **argv) +{ + int c; + int option=0; + static struct option longopts[] = { + {"version", no_argument, 0, 'V'}, + {"help", no_argument, 0, 'h'}, + {"verbose", no_argument, 0, 'v'}, + {0, 0, 0, 0} + }; + + if (argc < 2) + usage ("\n"); + + while (1) { + c = getopt_long (argc, argv, "Vhv", longopts, &option); + if (c == -1 || c == EOF || c == 1) + break; + + switch (c) { + case 'h': + print_help(); + exit(STATE_UNKNOWN); + break; + case 'V': + print_revision(progname, NP_VERSION); + print_curl_version(); + exit(STATE_UNKNOWN); + break; + case 'v': + verbose++; + break; + case '?': + /* print short usage statement if args not parsable */ + usage5 (); + break; + } + } + + return 0; +} + +void +print_help (void) +{ + print_revision(progname, NP_VERSION); + + printf ("Copyright (c) 2017 Andreas Baumann \n"); + printf (COPYRIGHT, copyright, email); + + printf ("%s\n", _("This plugin tests the HTTP(S) service on the specified host.")); + printf ("%s\n", _("It makes use of libcurl to do so.")); + + printf ("\n\n"); + + print_usage(); + printf (_("NOTE: One or both of -H and -I must be specified")); + + printf ("\n"); + + printf (UT_HELP_VRSN); + printf (UT_VERBOSE); + + printf (UT_SUPPORT); + + printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); + printf ("%s\n\n", _("check_http if you need a stable version.")); +} + +void +print_usage (void) +{ + printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); + printf ("%s\n\n", _("check_http if you need a stable version.")); + printf ("%s\n", _("Usage:")); + printf (" %s [-v verbose]\n", progname); +} + +void +print_curl_version (void) +{ + printf( "%s\n", curl_version()); +} -- cgit v0.10-9-g596f From 2a9812ee43d64d11be96544f84501686541da86b Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 19 Jan 2017 10:23:00 +0100 Subject: added most options from nagios-curl-plugin diff --git a/plugins/check_curl.c b/plugins/check_curl.c index be024fe..e4230dc 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -40,6 +40,20 @@ const char *email = "devel@monitoring-plugins.org"; #include "common.h" #include "utils.h" +#ifdef HAVE_SYS_TYPES_H +#include +#else +#define unsigned int size_t +#endif + +#ifdef HAVE_STRING_H +#include +#endif + +#ifdef HAVE_STDLIB_H +#include +#endif + #ifndef LIBCURL_PROTOCOL_HTTP #error libcurl compiled without HTTP support, compiling check_curl plugin makes not much sense #endif @@ -47,50 +61,343 @@ const char *email = "devel@monitoring-plugins.org"; #include "curl/curl.h" #include "curl/easy.h" -int verbose = FALSE; +#define DEFAULT_BUFFER_SIZE 2048 +#define DEFAULT_SERVER_URL "/" +#define DEFAULT_HTTP_PORT 80 +#define DEFAULT_HTTPS_PORT 443 +#define MAX_PORT 65535 + +/* for buffers for header and body */ +typedef struct { + char *buf; + size_t buflen; + size_t bufsize; +} curlhelp_curlbuf; + +/* for parsing the HTTP status line */ +typedef struct { + int http_major; /* major version of the protocol, always 1 (HTTP/0.9 + * never reached the big internet most likely) */ + int http_minor; /* minor version of the protocol, usually 0 or 1 */ + int http_code; /* HTTP return code as in RFC 2145 */ + int http_subcode; /* Microsoft IIS extension, HTTP subcodes, see + * http://support.microsoft.com/kb/318380/en-us */ + char *msg; /* the human readable message */ + char *first_line; /* a copy of the first line */ +} curlhelp_statusline; + +char *server_address; +char *host_name; +char *server_url = DEFAULT_SERVER_URL; +unsigned short server_port = DEFAULT_HTTP_PORT; +char *warning_thresholds = NULL; +char *critical_thresholds = NULL; +thresholds *thlds; +char user_agent[DEFAULT_BUFFER_SIZE]; +int verbose = 0; CURL *curl; +struct curl_slist *header_list = NULL; +curlhelp_curlbuf body_buf; +curlhelp_curlbuf header_buf; +curlhelp_statusline status_line; +char http_header[DEFAULT_BUFFER_SIZE]; +long code; +long socket_timeout = DEFAULT_SOCKET_TIMEOUT; +double total_time; +char errbuf[CURL_ERROR_SIZE+1]; +CURLcode res; +char url[DEFAULT_BUFFER_SIZE]; +char msg[DEFAULT_BUFFER_SIZE]; +char perfstring[DEFAULT_BUFFER_SIZE]; +char user_auth[MAX_INPUT_BUFFER] = ""; +int onredirect = STATE_OK; +int use_ssl = FALSE; +int use_sni = TRUE; +int check_cert = FALSE; +int ssl_version = CURL_SSLVERSION_DEFAULT; +char *client_cert = NULL; +char *client_privkey = NULL; -int process_arguments (int, char **); +int process_arguments (int, char**); void print_help (void); void print_usage (void); void print_curl_version (void); +int curlhelp_initbuffer (curlhelp_curlbuf*); +int curlhelp_buffer_callback (void*, size_t , size_t , void*); +void curlhelp_freebuffer (curlhelp_curlbuf*); + +int curlhelp_parse_statusline (char*, curlhelp_statusline *); +void curlhelp_free_statusline (curlhelp_statusline *); + +void remove_newlines (char *); +void test_file (char *); int main (int argc, char **argv) { - int result = STATE_UNKNOWN; + int result = STATE_OK; setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); /* Parse extra opts if any */ - argv=np_extra_opts (&argc, argv, progname); + argv = np_extra_opts (&argc, argv, progname); + + /* set defaults */ + snprintf( user_agent, DEFAULT_BUFFER_SIZE, "%s/v%s (monitoring-plugins %s)", + progname, NP_VERSION, VERSION); + /* parse arguments */ if (process_arguments (argc, argv) == ERROR) usage4 (_("Could not parse arguments")); - + + /* initialize curl */ if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_global_init failed\n"); if ((curl = curl_easy_init()) == NULL) die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); + if (verbose >= 3) + curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); + + /* initialize buffer for body of the answer */ + if (curlhelp_initbuffer(&body_buf) < 0) + die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); + curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); + + /* initialize buffer for header of the answer */ + if (curlhelp_initbuffer( &header_buf ) < 0) + die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); + curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); + + /* set the error buffer */ + curl_easy_setopt (curl, CURLOPT_ERRORBUFFER, errbuf); + + /* set timeouts */ + curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout); + curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout); + + /* compose URL */ + snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", + server_address, server_url); + curl_easy_setopt (curl, CURLOPT_URL, url); + + /* set port */ + curl_easy_setopt (curl, CURLOPT_PORT, server_port); + + /* compose HTTP headers */ + snprintf (http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); + header_list = curl_slist_append (header_list, http_header); + curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); + + /* set SSL version, warn about unsecure or unsupported versions */ + if (use_ssl) { + curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); + } + + /* client certificate and key to present to server (SSL) */ + if (client_cert) + curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert); + if (client_privkey) + curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey); + + /* per default if we have a CA verify both the peer and the + * hostname in the certificate, can be switched off later */ + curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2); + curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2); + + /* backward-compatible behaviour, be tolerant in checks */ + if (!check_cert) { + //TODO: depending on more options have aspects we want + //to be tolerant about + //curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); + } + + /* set default or user-given user agent identification */ + curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent); + + /* authentication */ + if (strcmp(user_auth, "")) + curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth); + + /* TODO: parameter auth method, bitfield of following methods: + * CURLAUTH_BASIC (default) + * CURLAUTH_DIGEST + * CURLAUTH_DIGEST_IE + * CURLAUTH_NEGOTIATE + * CURLAUTH_NTLM + * CURLAUTH_NTLM_WB + * + * convenience tokens for typical sets of methods: + * CURLAUTH_ANYSAFE: most secure, without BASIC + * or CURLAUTH_ANY: most secure, even BASIC if necessary + * + * curl_easy_setopt( curl, CURLOPT_HTTPAUTH, (long)CURLAUTH_DIGEST ); + */ + + /* TODO: --cacert: CA certificate file to verify SSL connection against (SSL) */ + //~ if( args_info.cacert_given ) { + //~ curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); + //~ } + + /* TODO: old option -s: check if the excepted string matches */ + //~ if( args_info.string_given ) { + //~ if( strstr( body_buf.buf, args_info.string_arg ) == NULL ) { + //~ printf( "HTTP CRITICAL - string not found|%s\n", perfstring ); + //~ curl_easy_cleanup( curl ); + //~ curl_global_cleanup( ); + //~ curlhelp_freebuffer( &body_buf ); + //~ curlhelp_freebuffer( &header_buf ); + //~ exit( STATE_CRITICAL ); + //~ } + //~ } + + /* handle redirections */ + if (onredirect == STATE_DEPENDENT) { + curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1); + /* TODO: handle the following aspects of redirection + CURLOPT_POSTREDIR: method switch + CURLINFO_REDIRECT_URL: custom redirect option + CURLOPT_REDIRECT_PROTOCOLS + CURLINFO_REDIRECT_COUNT + */ + } + + /* do the request */ + res = curl_easy_perform(curl); + + /* free header list, we don't need it anymore */ + curl_slist_free_all (header_list); + + /* Curl errors, result in critical Nagios state */ + if (res != CURLE_OK) { + remove_newlines (errbuf); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), + server_port, status_line.msg, status_line.msg); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", errbuf); + } + + /* we got the data and we executed the request in a given time, so we can append + * performance data to the answer always + */ + curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time); + snprintf (perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;%.6g size=%dB;;;0", + total_time, + 0.0, 0.0, + //~ args_info.warning_given ? args_info.warning_arg : 0.0, + //~ args_info.critical_given ? args_info.critical_arg : 0.0, + 0.0, + (int)body_buf.buflen); + + /* return a CRITICAL status if we couldn't read any data */ + if (strlen(header_buf.buf) == 0 && strlen(body_buf.buf) == 0) + die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); + + /* get status line of answer, check sanity of HTTP code */ + if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { + snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparseable status line in %.3g seconds response time|%s\n", + code, total_time, perfstring); + die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %d unknown - %s", code, msg); + } + + /* get result code from cURL */ + curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code); + if (verbose>=2) + printf ("* curl CURLINFO_RESPONSE_CODE is %d\n", code); + + /* print status line, header, body if verbose */ + if (verbose >= 2) { + puts ("--- HEADER ---"); + puts (header_buf.buf); + puts ("--- BODY ---"); + puts (body_buf.buf); + } + + /* illegal return codes result in a critical state */ + if (code >= 600 || code < 100) { + die (STATE_CRITICAL, _("HTTP CRITICAL: Invalid Status (%d, %.40s)\n"), status_line.http_code, status_line.msg); + /* server errors result in a critical state */ + } else if (code >= 500) { + result = STATE_CRITICAL; + /* client errors result in a warning state */ + } else if (code >= 400) { + result = STATE_WARNING; + /* check redirected page if specified */ + } else if (code >= 300) { + if (onredirect == STATE_DEPENDENT) { + code = status_line.http_code; + } + result = max_state_alt (onredirect, result); + // TODO: make sure the last status line has been + // parsed into the status_line structure + /* all other codes are considered ok */ + } else { + result = STATE_OK; + } + + /* check status codes, set exit status accordingly */ + if( status_line.http_code != code ) { + die (STATE_CRITICAL, _("HTTP CRITICAL HTTP/%d.%d %d %s - different HTTP codes (cUrl has %ld)\n"), + status_line.http_major, status_line.http_minor, + status_line.http_code, status_line.msg, code); + } + + /* -w, -c: check warning and critical level */ + result = max_state_alt(get_status(total_time, thlds), result); + + //~ die (result, "HTTP %s: %s\n", state_text(result), msg); + die (result, "HTTP %s HTTP/%d.%d %d %s - %.3g seconds response time|%s\n", + state_text(result), status_line.http_major, status_line.http_minor, + status_line.http_code, status_line.msg, + total_time, perfstring); + + /* proper cleanup after die? */ + curlhelp_free_statusline(&status_line); curl_easy_cleanup (curl); curl_global_cleanup (); - + curlhelp_freebuffer(&body_buf); + curlhelp_freebuffer(&header_buf); + return result; } +/* check whether a file exists */ +void +test_file (char *path) +{ + if (access(path, R_OK) == 0) + return; + usage2 (_("file does not exist or is not readable"), path); +} + int process_arguments (int argc, char **argv) { int c; + + enum { + SNI_OPTION + }; + int option=0; static struct option longopts[] = { - {"version", no_argument, 0, 'V'}, - {"help", no_argument, 0, 'h'}, - {"verbose", no_argument, 0, 'v'}, + {"ssl", optional_argument, 0, 'S'}, + {"sni", no_argument, 0, SNI_OPTION}, + {"IP-address", required_argument, 0, 'I'}, + {"url", required_argument, 0, 'u'}, + {"port", required_argument, 0, 'p'}, + {"authorization", required_argument, 0, 'a'}, + {"onredirect", required_argument, 0, 'f'}, + {"client-cert", required_argument, 0, 'J'}, + {"private-key", required_argument, 0, 'K'}, + {"useragent", required_argument, 0, 'A'}, + {"certificate", required_argument, 0, 'C'}, {0, 0, 0, 0} }; @@ -98,7 +405,7 @@ process_arguments (int argc, char **argv) usage ("\n"); while (1) { - c = getopt_long (argc, argv, "Vhv", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:u:f:C:J:K:S::", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -115,14 +422,155 @@ process_arguments (int argc, char **argv) case 'v': verbose++; break; + case 't': /* timeout period */ + if (!is_intnonneg (optarg)) + usage2 (_("Timeout interval must be a positive integer"), optarg); + else + socket_timeout = (int)strtol (optarg, NULL, 10); + break; + case 'c': /* critical time threshold */ + critical_thresholds = optarg; + break; + case 'w': /* warning time threshold */ + warning_thresholds = optarg; + break; + case 'H': /* virtual host */ + host_name = strdup (optarg); + break; + case 'I': /* internet address */ + server_address = strdup (optarg); + break; + case 'u': /* URL path */ + server_url = strdup (optarg); + break; + case 'p': /* Server port */ + if (!is_intnonneg (optarg)) + usage2 (_("Invalid port number, expecting a non-negative number"), optarg); + else { + if( strtol(optarg, NULL, 10) > MAX_PORT) + usage2 (_("Invalid port number, supplied port number is too big"), optarg); + server_port = (unsigned short)strtol(optarg, NULL, 10); + } + break; + case 'a': /* authorization info */ + strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); + user_auth[MAX_INPUT_BUFFER - 1] = 0; + break; + case 'A': /* useragent */ + snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); + break; + case 'C': /* Check SSL cert validity */ +#ifdef LIBCURL_FEATURE_SSL + /* TODO: C:, check age of certificate for backward compatible + * behaviour, but we would later add more check conditions */ + check_cert = TRUE; + goto enable_ssl; +#endif + case 'J': /* use client certificate */ +#ifdef LIBCURL_FEATURE_SSL + test_file(optarg); + client_cert = optarg; + goto enable_ssl; +#endif + case 'K': /* use client private key */ +#ifdef LIBCURL_FEATURE_SSL + test_file(optarg); + client_privkey = optarg; + goto enable_ssl; +#endif + case 'S': /* use SSL */ +#ifdef LIBCURL_FEATURE_SSL + enable_ssl: + use_ssl = TRUE; + /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. Only set if it's non-zero. This helps when we include multiple + parameters, like -S and -C combinations */ + ssl_version = CURL_SSLVERSION_TLSv1_0; + if (c=='S' && optarg != NULL) { + int got_plus = strchr(optarg, '+') != NULL; + + if (!strncmp (optarg, "1.2", 3)) + ssl_version = CURL_SSLVERSION_TLSv1_2; + else if (!strncmp (optarg, "1.1", 3)) + ssl_version = CURL_SSLVERSION_TLSv1_1; + else if (optarg[0] == '1') + ssl_version = CURL_SSLVERSION_TLSv1_0; + else if (optarg[0] == '3') + ssl_version = CURL_SSLVERSION_SSLv3; + else if (optarg[0] == '2') + ssl_version = CURL_SSLVERSION_SSLv2; + else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); + } + if (server_port == DEFAULT_HTTP_PORT) + server_port = DEFAULT_HTTPS_PORT; +#else + /* -C -J and -K fall through to here without SSL */ + usage4 (_("Invalid option - SSL is not available")); +#endif + break; + case SNI_OPTION: /* --sni is parsed, but ignored, the default is TRUE with libcurl */ + use_sni = TRUE; + break; + case 'f': /* onredirect */ + if (!strcmp (optarg, "ok")) + onredirect = STATE_OK; + else if (!strcmp (optarg, "warning")) + onredirect = STATE_WARNING; + else if (!strcmp (optarg, "critical")) + onredirect = STATE_CRITICAL; + else if (!strcmp (optarg, "unknown")) + onredirect = STATE_UNKNOWN; + else if (!strcmp (optarg, "follow")) + onredirect = STATE_DEPENDENT; + else usage2 (_("Invalid onredirect option"), optarg); + //~ if (!strcmp (optarg, "stickyport")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST|STICKY_PORT; + //~ else if (!strcmp (optarg, "sticky")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST; + //~ else if (!strcmp (optarg, "follow")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_NONE; + if (verbose >= 2) + printf(_("* Following redirects set to %s\n"), state_text(onredirect)); + break; case '?': /* print short usage statement if args not parsable */ usage5 (); break; } } + + c = optind; - return 0; + if (server_address == NULL && c < argc) + server_address = strdup (argv[c++]); + + if (host_name == NULL && c < argc) + host_name = strdup (argv[c++]); + + if (server_address == NULL) { + if (host_name == NULL) + usage4 (_("You must specify a server address or host name")); + else + server_address = strdup (host_name); + } + + set_thresholds(&thlds, warning_thresholds, critical_thresholds); + + if (critical_thresholds && thlds->critical->end>(double)socket_timeout) + socket_timeout = (int)thlds->critical->end + 1; + if (verbose >= 2) + printf ("* Socket timeout set to %d seconds\n", socket_timeout); + + //~ if (http_method == NULL) + //~ http_method = strdup ("GET"); + + if (client_cert && !client_privkey) + usage4 (_("If you use a client certificate you must also specify a private key file")); + + //~ if (virtual_port == 0) + //~ virtual_port = server_port; + + return TRUE; } void @@ -133,32 +581,91 @@ print_help (void) printf ("Copyright (c) 2017 Andreas Baumann \n"); printf (COPYRIGHT, copyright, email); - printf ("%s\n", _("This plugin tests the HTTP(S) service on the specified host.")); - printf ("%s\n", _("It makes use of libcurl to do so.")); + printf ("%s\n", _("This plugin tests the HTTP service on the specified host. It can test")); + printf ("%s\n", _("normal (http) and secure (https) servers, follow redirects, search for")); + printf ("%s\n", _("strings and regular expressions, check connection times, and report on")); + printf ("%s\n", _("certificate expiration times.")); + printf ("\n"); + printf ("%s\n", _("It makes use of libcurl to do so. It tries to be as compatible to check_http")); + printf ("%s\n", _("as possible.")); printf ("\n\n"); print_usage(); + printf (_("NOTE: One or both of -H and -I must be specified")); printf ("\n"); printf (UT_HELP_VRSN); + printf (UT_EXTRA_OPTS); + + printf (" %s\n", "-H, --hostname=ADDRESS"); + printf (" %s\n", _("Host name argument for servers using host headers (virtual host)")); + printf (" %s\n", _("Append a port to include it in the header (eg: example.com:5000)")); + printf (" %s\n", "-I, --IP-address=ADDRESS"); + printf (" %s\n", _("IP address or name (use numeric address if possible to bypass DNS lookup).")); + printf (" %s\n", "-p, --port=INTEGER"); + printf (" %s", _("Port number (default: ")); + printf ("%d)\n", DEFAULT_HTTP_PORT); + +#ifdef LIBCURL_FEATURE_SSL + printf (" %s\n", "-S, --ssl=VERSION[+]"); + printf (" %s\n", _("Connect via SSL. Port defaults to 443. VERSION is optional, and prevents")); + printf (" %s\n", _("auto-negotiation (2 = SSLv2, 3 = SSLv3, 1 = TLSv1, 1.1 = TLSv1.1,")); + printf (" %s\n", _("1.2 = TLSv1.2). With a '+' suffix, newer versions are also accepted.")); + printf (" %s\n", _("Note: SSLv2 and SSLv3 are deprecated and are usually disabled in libcurl")); + printf (" %s\n", "--sni"); + printf (" %s\n", _("Enable SSL/TLS hostname extension support (SNI)")); +#if LIBCURL_VERSION_NUM >= 0x071801 + printf (" %s\n", _("Note: --sni is the default in libcurl as SSLv2 and SSLV3 are deprecated and")); + printf (" %s\n", _(" SNI only really works since TLSv1.0")); +#else + printf (" %s\n", _("Note: SNI is not supported in libcurl before 7.18.1")); +#endif + printf (" %s\n", "-C, --certificate"); + printf (" %s\n", _("Check validity of certificate")); + printf (" %s\n", "-J, --client-cert=FILE"); + printf (" %s\n", _("Name of file that contains the client certificate (PEM format)")); + printf (" %s\n", _("to be used in establishing the SSL session")); + printf (" %s\n", "-K, --private-key=FILE"); + printf (" %s\n", _("Name of file containing the private key (PEM format)")); + printf (" %s\n", _("matching the client certificate")); +#endif + + printf (" %s\n", "-u, --url=PATH"); + printf (" %s\n", _("URL to GET or POST (default: /)")); + + printf (" %s\n", "-a, --authorization=AUTH_PAIR"); + printf (" %s\n", _("Username:password on sites with basic authentication")); + printf (" %s\n", "-A, --useragent=STRING"); + printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); + printf (" %s\n", "-f, --onredirect="); + printf (" %s\n", _("How to handle redirected pages. sticky is like follow but stick to the")); + printf (" %s\n", _("specified IP address. stickyport also ensures port stays the same.")); + + printf (UT_WARN_CRIT); + + printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); + printf (UT_VERBOSE); printf (UT_SUPPORT); - - printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); - printf ("%s\n\n", _("check_http if you need a stable version.")); } void print_usage (void) { + printf ("%s\n", _("Usage:")); + printf (" %s -H | -I [-u ] [-p ]\n",progname); + printf (" [-J ] [-K ]\n"); + printf (" [-w ] [-c ] [-t ] [-a auth]\n"); + printf (" [-f ]\n"); + printf (" [-A string] [-S ] [-C]\n"); + printf (" [-v verbose]\n", progname); + printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); - printf ("%s\n", _("Usage:")); - printf (" %s [-v verbose]\n", progname); } void @@ -166,3 +673,118 @@ print_curl_version (void) { printf( "%s\n", curl_version()); } + +int +curlhelp_initbuffer (curlhelp_curlbuf *buf) +{ + buf->bufsize = DEFAULT_BUFFER_SIZE; + buf->buflen = 0; + buf->buf = (char *)malloc ((size_t)buf->bufsize); + if (buf->buf == NULL) return -1; + return 0; +} + +int +curlhelp_buffer_callback (void *buffer, size_t size, size_t nmemb, void *stream) +{ + curlhelp_curlbuf *buf = (curlhelp_curlbuf *)stream; + + while (buf->bufsize < buf->buflen + size * nmemb + 1) { + buf->bufsize *= buf->bufsize * 2; + buf->buf = (char *)realloc (buf->buf, buf->bufsize); + if (buf->buf == NULL) return -1; + } + + memcpy (buf->buf + buf->buflen, buffer, size * nmemb); + buf->buflen += size * nmemb; + buf->buf[buf->buflen] = '\0'; + + return (int)(size * nmemb); +} + +void +curlhelp_freebuffer (curlhelp_curlbuf *buf) +{ + free (buf->buf); + buf->buf = NULL; +} + +/* TODO: when redirecting we get more than one HTTP header, make sure + * we parse the last one + */ +int +curlhelp_parse_statusline (char *buf, curlhelp_statusline *status_line) +{ + char *first_line_end; + char *p; + size_t first_line_len; + char *pp; + + first_line_end = strstr(buf, "\r\n"); + if (first_line_end == NULL) return -1; + + first_line_len = (size_t)(first_line_end - buf); + status_line->first_line = (char *)malloc (first_line_len + 1); + if (status_line->first_line == NULL) return -1; + memcpy (status_line->first_line, buf, first_line_len); + status_line->first_line[first_line_len] = '\0'; + + /* protocol and version: "HTTP/x.x" SP */ + + p = strtok(status_line->first_line, "/"); + if( p == NULL ) { free( status_line->first_line ); return -1; } + if( strcmp( p, "HTTP" ) != 0 ) { free( status_line->first_line ); return -1; } + + p = strtok( NULL, "." ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->http_major = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + p = strtok( NULL, " " ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->http_minor = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + /* status code: "404" or "404.1", then SP */ + + p = strtok( NULL, " ." ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + if( strchr( p, '.' ) != NULL ) { + char *ppp; + ppp = strtok( p, "." ); + status_line->http_code = (int)strtol( ppp, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + ppp = strtok( NULL, "" ); + status_line->http_subcode = (int)strtol( ppp, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + } else { + status_line->http_code = (int)strtol( p, &pp, 10 ); + status_line->http_subcode = -1; + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + } + + /* Human readable message: "Not Found" CRLF */ + + p = strtok( NULL, "" ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->msg = p; + + return 0; +} + +void +curlhelp_free_statusline (curlhelp_statusline *status_line) +{ + free (status_line->first_line); +} + +void +remove_newlines (char *s) +{ + char *p; + + for (p = s; *p != '\0'; p++) + if (*p == '\r' || *p == '\n') + *p = ' '; +} -- cgit v0.10-9-g596f From 67967df159843134654ca0e676e3514fba2d3705 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 19 Jan 2017 20:37:14 +0100 Subject: added -s option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index e4230dc..4a62c1d 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -90,6 +90,7 @@ char *server_address; char *host_name; char *server_url = DEFAULT_SERVER_URL; unsigned short server_port = DEFAULT_HTTP_PORT; +char output_string_search[30] = ""; char *warning_thresholds = NULL; char *critical_thresholds = NULL; thresholds *thlds; @@ -109,6 +110,7 @@ CURLcode res; char url[DEFAULT_BUFFER_SIZE]; char msg[DEFAULT_BUFFER_SIZE]; char perfstring[DEFAULT_BUFFER_SIZE]; +char string_expect[MAX_INPUT_BUFFER] = ""; char user_auth[MAX_INPUT_BUFFER] = ""; int onredirect = STATE_OK; int use_ssl = FALSE; @@ -246,18 +248,6 @@ main (int argc, char **argv) //~ curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); //~ } - /* TODO: old option -s: check if the excepted string matches */ - //~ if( args_info.string_given ) { - //~ if( strstr( body_buf.buf, args_info.string_arg ) == NULL ) { - //~ printf( "HTTP CRITICAL - string not found|%s\n", perfstring ); - //~ curl_easy_cleanup( curl ); - //~ curl_global_cleanup( ); - //~ curlhelp_freebuffer( &body_buf ); - //~ curlhelp_freebuffer( &header_buf ); - //~ exit( STATE_CRITICAL ); - //~ } - //~ } - /* handle redirections */ if (onredirect == STATE_DEPENDENT) { curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1); @@ -280,7 +270,7 @@ main (int argc, char **argv) remove_newlines (errbuf); snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), server_port, status_line.msg, status_line.msg); - die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", errbuf); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } /* we got the data and we executed the request in a given time, so we can append @@ -334,8 +324,9 @@ main (int argc, char **argv) code = status_line.http_code; } result = max_state_alt (onredirect, result); - // TODO: make sure the last status line has been - // parsed into the status_line structure + /* TODO: make sure the last status line has been + parsed into the status_line structure + */ /* all other codes are considered ok */ } else { result = STATE_OK; @@ -348,13 +339,25 @@ main (int argc, char **argv) status_line.http_code, status_line.msg, code); } + /* Page and Header content checks go here */ + if (strlen (string_expect)) { + if (!strstr (body_buf.buf, string_expect)) { + strncpy(&output_string_search[0],string_expect,sizeof(output_string_search)); + if(output_string_search[sizeof(output_string_search)-1]!='\0') { + bcopy("...",&output_string_search[sizeof(output_string_search)-4],4); + } + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sstring '%s' not found on '%s://%s:%d%s', "), msg, output_string_search, use_ssl ? "https" : "http", host_name ? host_name : server_address, server_port, server_url); + result = STATE_CRITICAL; + } + } + /* -w, -c: check warning and critical level */ result = max_state_alt(get_status(total_time, thlds), result); //~ die (result, "HTTP %s: %s\n", state_text(result), msg); - die (result, "HTTP %s HTTP/%d.%d %d %s - %.3g seconds response time|%s\n", + die (result, "HTTP %s HTTP/%d.%d %d %s - %s - %.3g seconds response time|%s\n", state_text(result), status_line.http_major, status_line.http_minor, - status_line.http_code, status_line.msg, + status_line.http_code, status_line.msg, msg, total_time, perfstring); /* proper cleanup after die? */ @@ -393,6 +396,7 @@ process_arguments (int argc, char **argv) {"url", required_argument, 0, 'u'}, {"port", required_argument, 0, 'p'}, {"authorization", required_argument, 0, 'a'}, + {"string", required_argument, 0, 's'}, {"onredirect", required_argument, 0, 'f'}, {"client-cert", required_argument, 0, 'J'}, {"private-key", required_argument, 0, 'K'}, @@ -405,7 +409,7 @@ process_arguments (int argc, char **argv) usage ("\n"); while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:u:f:C:J:K:S::", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:u:f:C:J:K:S::", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -532,6 +536,10 @@ process_arguments (int argc, char **argv) if (verbose >= 2) printf(_("* Following redirects set to %s\n"), state_text(onredirect)); break; + case 's': /* string or substring */ + strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); + string_expect[MAX_INPUT_BUFFER - 1] = 0; + break; case '?': /* print short usage statement if args not parsable */ usage5 (); @@ -578,6 +586,7 @@ print_help (void) { print_revision(progname, NP_VERSION); + printf ("Copyright (c) 1999 Ethan Galstad \n"); printf ("Copyright (c) 2017 Andreas Baumann \n"); printf (COPYRIGHT, copyright, email); @@ -633,6 +642,8 @@ print_help (void) printf (" %s\n", _("matching the client certificate")); #endif + printf (" %s\n", "-s, --string=STRING"); + printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); printf (" %s\n", _("URL to GET or POST (default: /)")); -- cgit v0.10-9-g596f From c3bf9bd675fcbc04e748e01ab15f70546e9d641c Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 19 Jan 2017 20:42:57 +0100 Subject: fixed curl error message diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4a62c1d..8ef48d0 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -268,8 +268,8 @@ main (int argc, char **argv) /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { remove_newlines (errbuf); - snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), - server_port, status_line.msg, status_line.msg); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s\n"), + server_port, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } -- cgit v0.10-9-g596f From 2b8f17e577c0a05bbc4531520fb7a30b3fa35bfe Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 20 Jan 2017 10:18:24 +0100 Subject: adapted to style, using header file shims instead of HAVE_XXX by hand diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8ef48d0..8ed1aee 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -13,7 +13,7 @@ * normal (http) and secure (https) servers, follow redirects, search for * strings and regular expressions, check connection times, and report on * certificate expiration times. -* +* * This plugin uses functions from the curl library, see * http://curl.haxx.se * @@ -40,20 +40,6 @@ const char *email = "devel@monitoring-plugins.org"; #include "common.h" #include "utils.h" -#ifdef HAVE_SYS_TYPES_H -#include -#else -#define unsigned int size_t -#endif - -#ifdef HAVE_STRING_H -#include -#endif - -#ifdef HAVE_STDLIB_H -#include -#endif - #ifndef LIBCURL_PROTOCOL_HTTP #error libcurl compiled without HTTP support, compiling check_curl plugin makes not much sense #endif @@ -69,21 +55,21 @@ const char *email = "devel@monitoring-plugins.org"; /* for buffers for header and body */ typedef struct { - char *buf; - size_t buflen; - size_t bufsize; + char *buf; + size_t buflen; + size_t bufsize; } curlhelp_curlbuf; /* for parsing the HTTP status line */ typedef struct { - int http_major; /* major version of the protocol, always 1 (HTTP/0.9 - * never reached the big internet most likely) */ - int http_minor; /* minor version of the protocol, usually 0 or 1 */ - int http_code; /* HTTP return code as in RFC 2145 */ - int http_subcode; /* Microsoft IIS extension, HTTP subcodes, see - * http://support.microsoft.com/kb/318380/en-us */ - char *msg; /* the human readable message */ - char *first_line; /* a copy of the first line */ + int http_major; /* major version of the protocol, always 1 (HTTP/0.9 + * never reached the big internet most likely) */ + int http_minor; /* minor version of the protocol, usually 0 or 1 */ + int http_code; /* HTTP return code as in RFC 2145 */ + int http_subcode; /* Microsoft IIS extension, HTTP subcodes, see + * http://support.microsoft.com/kb/318380/en-us */ + char *msg; /* the human readable message */ + char *first_line; /* a copy of the first line */ } curlhelp_statusline; char *server_address; @@ -137,587 +123,587 @@ void test_file (char *); int main (int argc, char **argv) { - int result = STATE_OK; - - setlocale (LC_ALL, ""); - bindtextdomain (PACKAGE, LOCALEDIR); - textdomain (PACKAGE); - - /* Parse extra opts if any */ - argv = np_extra_opts (&argc, argv, progname); - - /* set defaults */ - snprintf( user_agent, DEFAULT_BUFFER_SIZE, "%s/v%s (monitoring-plugins %s)", - progname, NP_VERSION, VERSION); - - /* parse arguments */ - if (process_arguments (argc, argv) == ERROR) - usage4 (_("Could not parse arguments")); - - /* initialize curl */ - if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) - die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_global_init failed\n"); - - if ((curl = curl_easy_init()) == NULL) - die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); - - if (verbose >= 3) - curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); - - /* initialize buffer for body of the answer */ - if (curlhelp_initbuffer(&body_buf) < 0) - die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); - curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, curlhelp_buffer_callback); - curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); - - /* initialize buffer for header of the answer */ - if (curlhelp_initbuffer( &header_buf ) < 0) - die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); - curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, curlhelp_buffer_callback); - curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); - - /* set the error buffer */ - curl_easy_setopt (curl, CURLOPT_ERRORBUFFER, errbuf); - - /* set timeouts */ - curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout); - curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout); - - /* compose URL */ - snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - server_address, server_url); - curl_easy_setopt (curl, CURLOPT_URL, url); - - /* set port */ - curl_easy_setopt (curl, CURLOPT_PORT, server_port); - - /* compose HTTP headers */ - snprintf (http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); - header_list = curl_slist_append (header_list, http_header); - curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); - - /* set SSL version, warn about unsecure or unsupported versions */ - if (use_ssl) { - curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); - } - - /* client certificate and key to present to server (SSL) */ - if (client_cert) - curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert); - if (client_privkey) - curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey); - - /* per default if we have a CA verify both the peer and the - * hostname in the certificate, can be switched off later */ - curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2); - curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2); - - /* backward-compatible behaviour, be tolerant in checks */ - if (!check_cert) { - //TODO: depending on more options have aspects we want - //to be tolerant about - //curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); - } - - /* set default or user-given user agent identification */ - curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent); - - /* authentication */ - if (strcmp(user_auth, "")) - curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth); - - /* TODO: parameter auth method, bitfield of following methods: - * CURLAUTH_BASIC (default) - * CURLAUTH_DIGEST - * CURLAUTH_DIGEST_IE - * CURLAUTH_NEGOTIATE - * CURLAUTH_NTLM - * CURLAUTH_NTLM_WB - * - * convenience tokens for typical sets of methods: - * CURLAUTH_ANYSAFE: most secure, without BASIC - * or CURLAUTH_ANY: most secure, even BASIC if necessary - * - * curl_easy_setopt( curl, CURLOPT_HTTPAUTH, (long)CURLAUTH_DIGEST ); - */ - - /* TODO: --cacert: CA certificate file to verify SSL connection against (SSL) */ - //~ if( args_info.cacert_given ) { - //~ curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); - //~ } - - /* handle redirections */ - if (onredirect == STATE_DEPENDENT) { - curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1); - /* TODO: handle the following aspects of redirection - CURLOPT_POSTREDIR: method switch - CURLINFO_REDIRECT_URL: custom redirect option - CURLOPT_REDIRECT_PROTOCOLS - CURLINFO_REDIRECT_COUNT - */ - } - - /* do the request */ - res = curl_easy_perform(curl); - - /* free header list, we don't need it anymore */ - curl_slist_free_all (header_list); - - /* Curl errors, result in critical Nagios state */ - if (res != CURLE_OK) { - remove_newlines (errbuf); - snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s\n"), - server_port, res, curl_easy_strerror(res)); - die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); - } - - /* we got the data and we executed the request in a given time, so we can append - * performance data to the answer always - */ - curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time); - snprintf (perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;%.6g size=%dB;;;0", - total_time, - 0.0, 0.0, - //~ args_info.warning_given ? args_info.warning_arg : 0.0, - //~ args_info.critical_given ? args_info.critical_arg : 0.0, - 0.0, - (int)body_buf.buflen); - - /* return a CRITICAL status if we couldn't read any data */ - if (strlen(header_buf.buf) == 0 && strlen(body_buf.buf) == 0) - die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); - - /* get status line of answer, check sanity of HTTP code */ - if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { - snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparseable status line in %.3g seconds response time|%s\n", - code, total_time, perfstring); - die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %d unknown - %s", code, msg); - } - - /* get result code from cURL */ - curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code); - if (verbose>=2) - printf ("* curl CURLINFO_RESPONSE_CODE is %d\n", code); - - /* print status line, header, body if verbose */ - if (verbose >= 2) { - puts ("--- HEADER ---"); - puts (header_buf.buf); - puts ("--- BODY ---"); - puts (body_buf.buf); - } - - /* illegal return codes result in a critical state */ - if (code >= 600 || code < 100) { - die (STATE_CRITICAL, _("HTTP CRITICAL: Invalid Status (%d, %.40s)\n"), status_line.http_code, status_line.msg); - /* server errors result in a critical state */ - } else if (code >= 500) { - result = STATE_CRITICAL; - /* client errors result in a warning state */ - } else if (code >= 400) { - result = STATE_WARNING; - /* check redirected page if specified */ - } else if (code >= 300) { - if (onredirect == STATE_DEPENDENT) { - code = status_line.http_code; - } - result = max_state_alt (onredirect, result); - /* TODO: make sure the last status line has been - parsed into the status_line structure - */ - /* all other codes are considered ok */ - } else { - result = STATE_OK; - } - - /* check status codes, set exit status accordingly */ - if( status_line.http_code != code ) { - die (STATE_CRITICAL, _("HTTP CRITICAL HTTP/%d.%d %d %s - different HTTP codes (cUrl has %ld)\n"), - status_line.http_major, status_line.http_minor, - status_line.http_code, status_line.msg, code); - } - - /* Page and Header content checks go here */ - if (strlen (string_expect)) { - if (!strstr (body_buf.buf, string_expect)) { - strncpy(&output_string_search[0],string_expect,sizeof(output_string_search)); - if(output_string_search[sizeof(output_string_search)-1]!='\0') { - bcopy("...",&output_string_search[sizeof(output_string_search)-4],4); - } - snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sstring '%s' not found on '%s://%s:%d%s', "), msg, output_string_search, use_ssl ? "https" : "http", host_name ? host_name : server_address, server_port, server_url); - result = STATE_CRITICAL; - } - } - - /* -w, -c: check warning and critical level */ - result = max_state_alt(get_status(total_time, thlds), result); - - //~ die (result, "HTTP %s: %s\n", state_text(result), msg); - die (result, "HTTP %s HTTP/%d.%d %d %s - %s - %.3g seconds response time|%s\n", - state_text(result), status_line.http_major, status_line.http_minor, - status_line.http_code, status_line.msg, msg, - total_time, perfstring); - - /* proper cleanup after die? */ - curlhelp_free_statusline(&status_line); - curl_easy_cleanup (curl); - curl_global_cleanup (); - curlhelp_freebuffer(&body_buf); - curlhelp_freebuffer(&header_buf); - - return result; + int result = STATE_OK; + + setlocale (LC_ALL, ""); + bindtextdomain (PACKAGE, LOCALEDIR); + textdomain (PACKAGE); + + /* Parse extra opts if any */ + argv = np_extra_opts (&argc, argv, progname); + + /* set defaults */ + snprintf( user_agent, DEFAULT_BUFFER_SIZE, "%s/v%s (monitoring-plugins %s)", + progname, NP_VERSION, VERSION); + + /* parse arguments */ + if (process_arguments (argc, argv) == ERROR) + usage4 (_("Could not parse arguments")); + + /* initialize curl */ + if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) + die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_global_init failed\n"); + + if ((curl = curl_easy_init()) == NULL) + die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); + + if (verbose >= 3) + curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); + + /* initialize buffer for body of the answer */ + if (curlhelp_initbuffer(&body_buf) < 0) + die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); + curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); + + /* initialize buffer for header of the answer */ + if (curlhelp_initbuffer( &header_buf ) < 0) + die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); + curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); + + /* set the error buffer */ + curl_easy_setopt (curl, CURLOPT_ERRORBUFFER, errbuf); + + /* set timeouts */ + curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout); + curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout); + + /* compose URL */ + snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", + server_address, server_url); + curl_easy_setopt (curl, CURLOPT_URL, url); + + /* set port */ + curl_easy_setopt (curl, CURLOPT_PORT, server_port); + + /* compose HTTP headers */ + snprintf (http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); + header_list = curl_slist_append (header_list, http_header); + curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); + + /* set SSL version, warn about unsecure or unsupported versions */ + if (use_ssl) { + curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); + } + + /* client certificate and key to present to server (SSL) */ + if (client_cert) + curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert); + if (client_privkey) + curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey); + + /* per default if we have a CA verify both the peer and the + * hostname in the certificate, can be switched off later */ + curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2); + curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2); + + /* backward-compatible behaviour, be tolerant in checks */ + if (!check_cert) { + //TODO: depending on more options have aspects we want + //to be tolerant about + //curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); + } + + /* set default or user-given user agent identification */ + curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent); + + /* authentication */ + if (strcmp(user_auth, "")) + curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth); + + /* TODO: parameter auth method, bitfield of following methods: + * CURLAUTH_BASIC (default) + * CURLAUTH_DIGEST + * CURLAUTH_DIGEST_IE + * CURLAUTH_NEGOTIATE + * CURLAUTH_NTLM + * CURLAUTH_NTLM_WB + * + * convenience tokens for typical sets of methods: + * CURLAUTH_ANYSAFE: most secure, without BASIC + * or CURLAUTH_ANY: most secure, even BASIC if necessary + * + * curl_easy_setopt( curl, CURLOPT_HTTPAUTH, (long)CURLAUTH_DIGEST ); + */ + + /* TODO: --cacert: CA certificate file to verify SSL connection against (SSL) */ + //~ if( args_info.cacert_given ) { + //~ curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); + //~ } + + /* handle redirections */ + if (onredirect == STATE_DEPENDENT) { + curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1); + /* TODO: handle the following aspects of redirection + CURLOPT_POSTREDIR: method switch + CURLINFO_REDIRECT_URL: custom redirect option + CURLOPT_REDIRECT_PROTOCOLS + CURLINFO_REDIRECT_COUNT + */ + } + + /* do the request */ + res = curl_easy_perform(curl); + + /* free header list, we don't need it anymore */ + curl_slist_free_all (header_list); + + /* Curl errors, result in critical Nagios state */ + if (res != CURLE_OK) { + remove_newlines (errbuf); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s\n"), + server_port, res, curl_easy_strerror(res)); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } + + /* we got the data and we executed the request in a given time, so we can append + * performance data to the answer always + */ + curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time); + snprintf (perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;%.6g size=%dB;;;0", + total_time, + 0.0, 0.0, + //~ args_info.warning_given ? args_info.warning_arg : 0.0, + //~ args_info.critical_given ? args_info.critical_arg : 0.0, + 0.0, + (int)body_buf.buflen); + + /* return a CRITICAL status if we couldn't read any data */ + if (strlen(header_buf.buf) == 0 && strlen(body_buf.buf) == 0) + die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); + + /* get status line of answer, check sanity of HTTP code */ + if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { + snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparseable status line in %.3g seconds response time|%s\n", + code, total_time, perfstring); + die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %d unknown - %s", code, msg); + } + + /* get result code from cURL */ + curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code); + if (verbose>=2) + printf ("* curl CURLINFO_RESPONSE_CODE is %d\n", code); + + /* print status line, header, body if verbose */ + if (verbose >= 2) { + puts ("--- HEADER ---"); + puts (header_buf.buf); + puts ("--- BODY ---"); + puts (body_buf.buf); + } + + /* illegal return codes result in a critical state */ + if (code >= 600 || code < 100) { + die (STATE_CRITICAL, _("HTTP CRITICAL: Invalid Status (%d, %.40s)\n"), status_line.http_code, status_line.msg); + /* server errors result in a critical state */ + } else if (code >= 500) { + result = STATE_CRITICAL; + /* client errors result in a warning state */ + } else if (code >= 400) { + result = STATE_WARNING; + /* check redirected page if specified */ + } else if (code >= 300) { + if (onredirect == STATE_DEPENDENT) { + code = status_line.http_code; + } + result = max_state_alt (onredirect, result); + /* TODO: make sure the last status line has been + parsed into the status_line structure + */ + /* all other codes are considered ok */ + } else { + result = STATE_OK; + } + + /* check status codes, set exit status accordingly */ + if( status_line.http_code != code ) { + die (STATE_CRITICAL, _("HTTP CRITICAL HTTP/%d.%d %d %s - different HTTP codes (cUrl has %ld)\n"), + status_line.http_major, status_line.http_minor, + status_line.http_code, status_line.msg, code); + } + + /* Page and Header content checks go here */ + if (strlen (string_expect)) { + if (!strstr (body_buf.buf, string_expect)) { + strncpy(&output_string_search[0],string_expect,sizeof(output_string_search)); + if(output_string_search[sizeof(output_string_search)-1]!='\0') { + bcopy("...",&output_string_search[sizeof(output_string_search)-4],4); + } + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sstring '%s' not found on '%s://%s:%d%s', "), msg, output_string_search, use_ssl ? "https" : "http", host_name ? host_name : server_address, server_port, server_url); + result = STATE_CRITICAL; + } + } + + /* -w, -c: check warning and critical level */ + result = max_state_alt(get_status(total_time, thlds), result); + + //~ die (result, "HTTP %s: %s\n", state_text(result), msg); + die (result, "HTTP %s HTTP/%d.%d %d %s - %s - %.3g seconds response time|%s\n", + state_text(result), status_line.http_major, status_line.http_minor, + status_line.http_code, status_line.msg, msg, + total_time, perfstring); + + /* proper cleanup after die? */ + curlhelp_free_statusline(&status_line); + curl_easy_cleanup (curl); + curl_global_cleanup (); + curlhelp_freebuffer(&body_buf); + curlhelp_freebuffer(&header_buf); + + return result; } /* check whether a file exists */ void test_file (char *path) { - if (access(path, R_OK) == 0) - return; - usage2 (_("file does not exist or is not readable"), path); + if (access(path, R_OK) == 0) + return; + usage2 (_("file does not exist or is not readable"), path); } int process_arguments (int argc, char **argv) { - int c; - - enum { - SNI_OPTION - }; - - int option=0; - static struct option longopts[] = { - {"ssl", optional_argument, 0, 'S'}, - {"sni", no_argument, 0, SNI_OPTION}, - {"IP-address", required_argument, 0, 'I'}, - {"url", required_argument, 0, 'u'}, - {"port", required_argument, 0, 'p'}, - {"authorization", required_argument, 0, 'a'}, - {"string", required_argument, 0, 's'}, - {"onredirect", required_argument, 0, 'f'}, - {"client-cert", required_argument, 0, 'J'}, - {"private-key", required_argument, 0, 'K'}, - {"useragent", required_argument, 0, 'A'}, - {"certificate", required_argument, 0, 'C'}, - {0, 0, 0, 0} - }; - - if (argc < 2) - usage ("\n"); - - while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:u:f:C:J:K:S::", longopts, &option); - if (c == -1 || c == EOF || c == 1) - break; - - switch (c) { - case 'h': - print_help(); - exit(STATE_UNKNOWN); - break; - case 'V': - print_revision(progname, NP_VERSION); - print_curl_version(); - exit(STATE_UNKNOWN); - break; - case 'v': - verbose++; - break; - case 't': /* timeout period */ - if (!is_intnonneg (optarg)) - usage2 (_("Timeout interval must be a positive integer"), optarg); - else - socket_timeout = (int)strtol (optarg, NULL, 10); - break; - case 'c': /* critical time threshold */ - critical_thresholds = optarg; - break; - case 'w': /* warning time threshold */ - warning_thresholds = optarg; - break; - case 'H': /* virtual host */ - host_name = strdup (optarg); - break; - case 'I': /* internet address */ - server_address = strdup (optarg); - break; - case 'u': /* URL path */ - server_url = strdup (optarg); - break; - case 'p': /* Server port */ - if (!is_intnonneg (optarg)) - usage2 (_("Invalid port number, expecting a non-negative number"), optarg); - else { - if( strtol(optarg, NULL, 10) > MAX_PORT) - usage2 (_("Invalid port number, supplied port number is too big"), optarg); - server_port = (unsigned short)strtol(optarg, NULL, 10); - } - break; - case 'a': /* authorization info */ - strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); - user_auth[MAX_INPUT_BUFFER - 1] = 0; - break; - case 'A': /* useragent */ - snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); - break; - case 'C': /* Check SSL cert validity */ + int c; + + enum { + SNI_OPTION + }; + + int option=0; + static struct option longopts[] = { + {"ssl", optional_argument, 0, 'S'}, + {"sni", no_argument, 0, SNI_OPTION}, + {"IP-address", required_argument, 0, 'I'}, + {"url", required_argument, 0, 'u'}, + {"port", required_argument, 0, 'p'}, + {"authorization", required_argument, 0, 'a'}, + {"string", required_argument, 0, 's'}, + {"onredirect", required_argument, 0, 'f'}, + {"client-cert", required_argument, 0, 'J'}, + {"private-key", required_argument, 0, 'K'}, + {"useragent", required_argument, 0, 'A'}, + {"certificate", required_argument, 0, 'C'}, + {0, 0, 0, 0} + }; + + if (argc < 2) + usage ("\n"); + + while (1) { + c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:u:f:C:J:K:S::", longopts, &option); + if (c == -1 || c == EOF || c == 1) + break; + + switch (c) { + case 'h': + print_help(); + exit(STATE_UNKNOWN); + break; + case 'V': + print_revision(progname, NP_VERSION); + print_curl_version(); + exit(STATE_UNKNOWN); + break; + case 'v': + verbose++; + break; + case 't': /* timeout period */ + if (!is_intnonneg (optarg)) + usage2 (_("Timeout interval must be a positive integer"), optarg); + else + socket_timeout = (int)strtol (optarg, NULL, 10); + break; + case 'c': /* critical time threshold */ + critical_thresholds = optarg; + break; + case 'w': /* warning time threshold */ + warning_thresholds = optarg; + break; + case 'H': /* virtual host */ + host_name = strdup (optarg); + break; + case 'I': /* internet address */ + server_address = strdup (optarg); + break; + case 'u': /* URL path */ + server_url = strdup (optarg); + break; + case 'p': /* Server port */ + if (!is_intnonneg (optarg)) + usage2 (_("Invalid port number, expecting a non-negative number"), optarg); + else { + if( strtol(optarg, NULL, 10) > MAX_PORT) + usage2 (_("Invalid port number, supplied port number is too big"), optarg); + server_port = (unsigned short)strtol(optarg, NULL, 10); + } + break; + case 'a': /* authorization info */ + strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); + user_auth[MAX_INPUT_BUFFER - 1] = 0; + break; + case 'A': /* useragent */ + snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); + break; + case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL - /* TODO: C:, check age of certificate for backward compatible - * behaviour, but we would later add more check conditions */ - check_cert = TRUE; - goto enable_ssl; + /* TODO: C:, check age of certificate for backward compatible + * behaviour, but we would later add more check conditions */ + check_cert = TRUE; + goto enable_ssl; #endif - case 'J': /* use client certificate */ + case 'J': /* use client certificate */ #ifdef LIBCURL_FEATURE_SSL - test_file(optarg); - client_cert = optarg; - goto enable_ssl; + test_file(optarg); + client_cert = optarg; + goto enable_ssl; #endif - case 'K': /* use client private key */ + case 'K': /* use client private key */ #ifdef LIBCURL_FEATURE_SSL - test_file(optarg); - client_privkey = optarg; - goto enable_ssl; + test_file(optarg); + client_privkey = optarg; + goto enable_ssl; #endif - case 'S': /* use SSL */ + case 'S': /* use SSL */ #ifdef LIBCURL_FEATURE_SSL - enable_ssl: - use_ssl = TRUE; - /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. Only set if it's non-zero. This helps when we include multiple - parameters, like -S and -C combinations */ - ssl_version = CURL_SSLVERSION_TLSv1_0; - if (c=='S' && optarg != NULL) { - int got_plus = strchr(optarg, '+') != NULL; - - if (!strncmp (optarg, "1.2", 3)) - ssl_version = CURL_SSLVERSION_TLSv1_2; - else if (!strncmp (optarg, "1.1", 3)) - ssl_version = CURL_SSLVERSION_TLSv1_1; - else if (optarg[0] == '1') - ssl_version = CURL_SSLVERSION_TLSv1_0; - else if (optarg[0] == '3') - ssl_version = CURL_SSLVERSION_SSLv3; - else if (optarg[0] == '2') - ssl_version = CURL_SSLVERSION_SSLv2; - else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); - } - if (server_port == DEFAULT_HTTP_PORT) - server_port = DEFAULT_HTTPS_PORT; + enable_ssl: + use_ssl = TRUE; + /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. Only set if it's non-zero. This helps when we include multiple + parameters, like -S and -C combinations */ + ssl_version = CURL_SSLVERSION_TLSv1_0; + if (c=='S' && optarg != NULL) { + int got_plus = strchr(optarg, '+') != NULL; + + if (!strncmp (optarg, "1.2", 3)) + ssl_version = CURL_SSLVERSION_TLSv1_2; + else if (!strncmp (optarg, "1.1", 3)) + ssl_version = CURL_SSLVERSION_TLSv1_1; + else if (optarg[0] == '1') + ssl_version = CURL_SSLVERSION_TLSv1_0; + else if (optarg[0] == '3') + ssl_version = CURL_SSLVERSION_SSLv3; + else if (optarg[0] == '2') + ssl_version = CURL_SSLVERSION_SSLv2; + else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); + } + if (server_port == DEFAULT_HTTP_PORT) + server_port = DEFAULT_HTTPS_PORT; #else - /* -C -J and -K fall through to here without SSL */ - usage4 (_("Invalid option - SSL is not available")); + /* -C -J and -K fall through to here without SSL */ + usage4 (_("Invalid option - SSL is not available")); #endif - break; - case SNI_OPTION: /* --sni is parsed, but ignored, the default is TRUE with libcurl */ - use_sni = TRUE; - break; - case 'f': /* onredirect */ - if (!strcmp (optarg, "ok")) - onredirect = STATE_OK; - else if (!strcmp (optarg, "warning")) - onredirect = STATE_WARNING; - else if (!strcmp (optarg, "critical")) - onredirect = STATE_CRITICAL; - else if (!strcmp (optarg, "unknown")) - onredirect = STATE_UNKNOWN; - else if (!strcmp (optarg, "follow")) - onredirect = STATE_DEPENDENT; - else usage2 (_("Invalid onredirect option"), optarg); - //~ if (!strcmp (optarg, "stickyport")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST|STICKY_PORT; - //~ else if (!strcmp (optarg, "sticky")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST; - //~ else if (!strcmp (optarg, "follow")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_NONE; - if (verbose >= 2) - printf(_("* Following redirects set to %s\n"), state_text(onredirect)); - break; - case 's': /* string or substring */ - strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); - string_expect[MAX_INPUT_BUFFER - 1] = 0; - break; - case '?': - /* print short usage statement if args not parsable */ - usage5 (); - break; - } - } - - c = optind; - - if (server_address == NULL && c < argc) - server_address = strdup (argv[c++]); - - if (host_name == NULL && c < argc) - host_name = strdup (argv[c++]); - - if (server_address == NULL) { - if (host_name == NULL) - usage4 (_("You must specify a server address or host name")); - else - server_address = strdup (host_name); - } - - set_thresholds(&thlds, warning_thresholds, critical_thresholds); - - if (critical_thresholds && thlds->critical->end>(double)socket_timeout) - socket_timeout = (int)thlds->critical->end + 1; - if (verbose >= 2) - printf ("* Socket timeout set to %d seconds\n", socket_timeout); + break; + case SNI_OPTION: /* --sni is parsed, but ignored, the default is TRUE with libcurl */ + use_sni = TRUE; + break; + case 'f': /* onredirect */ + if (!strcmp (optarg, "ok")) + onredirect = STATE_OK; + else if (!strcmp (optarg, "warning")) + onredirect = STATE_WARNING; + else if (!strcmp (optarg, "critical")) + onredirect = STATE_CRITICAL; + else if (!strcmp (optarg, "unknown")) + onredirect = STATE_UNKNOWN; + else if (!strcmp (optarg, "follow")) + onredirect = STATE_DEPENDENT; + else usage2 (_("Invalid onredirect option"), optarg); + //~ if (!strcmp (optarg, "stickyport")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST|STICKY_PORT; + //~ else if (!strcmp (optarg, "sticky")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST; + //~ else if (!strcmp (optarg, "follow")) + //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_NONE; + if (verbose >= 2) + printf(_("* Following redirects set to %s\n"), state_text(onredirect)); + break; + case 's': /* string or substring */ + strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); + string_expect[MAX_INPUT_BUFFER - 1] = 0; + break; + case '?': + /* print short usage statement if args not parsable */ + usage5 (); + break; + } + } + + c = optind; + + if (server_address == NULL && c < argc) + server_address = strdup (argv[c++]); + + if (host_name == NULL && c < argc) + host_name = strdup (argv[c++]); + + if (server_address == NULL) { + if (host_name == NULL) + usage4 (_("You must specify a server address or host name")); + else + server_address = strdup (host_name); + } + + set_thresholds(&thlds, warning_thresholds, critical_thresholds); + + if (critical_thresholds && thlds->critical->end>(double)socket_timeout) + socket_timeout = (int)thlds->critical->end + 1; + if (verbose >= 2) + printf ("* Socket timeout set to %d seconds\n", socket_timeout); //~ if (http_method == NULL) //~ http_method = strdup ("GET"); - if (client_cert && !client_privkey) - usage4 (_("If you use a client certificate you must also specify a private key file")); + if (client_cert && !client_privkey) + usage4 (_("If you use a client certificate you must also specify a private key file")); //~ if (virtual_port == 0) //~ virtual_port = server_port; - return TRUE; + return TRUE; } void print_help (void) { - print_revision(progname, NP_VERSION); + print_revision(progname, NP_VERSION); + + printf ("Copyright (c) 1999 Ethan Galstad \n"); + printf ("Copyright (c) 2017 Andreas Baumann \n"); + printf (COPYRIGHT, copyright, email); - printf ("Copyright (c) 1999 Ethan Galstad \n"); - printf ("Copyright (c) 2017 Andreas Baumann \n"); - printf (COPYRIGHT, copyright, email); + printf ("%s\n", _("This plugin tests the HTTP service on the specified host. It can test")); + printf ("%s\n", _("normal (http) and secure (https) servers, follow redirects, search for")); + printf ("%s\n", _("strings and regular expressions, check connection times, and report on")); + printf ("%s\n", _("certificate expiration times.")); + printf ("\n"); + printf ("%s\n", _("It makes use of libcurl to do so. It tries to be as compatible to check_http")); + printf ("%s\n", _("as possible.")); - printf ("%s\n", _("This plugin tests the HTTP service on the specified host. It can test")); - printf ("%s\n", _("normal (http) and secure (https) servers, follow redirects, search for")); - printf ("%s\n", _("strings and regular expressions, check connection times, and report on")); - printf ("%s\n", _("certificate expiration times.")); - printf ("\n"); - printf ("%s\n", _("It makes use of libcurl to do so. It tries to be as compatible to check_http")); - printf ("%s\n", _("as possible.")); + printf ("\n\n"); - printf ("\n\n"); + print_usage(); - print_usage(); - - printf (_("NOTE: One or both of -H and -I must be specified")); + printf (_("NOTE: One or both of -H and -I must be specified")); - printf ("\n"); + printf ("\n"); - printf (UT_HELP_VRSN); - printf (UT_EXTRA_OPTS); + printf (UT_HELP_VRSN); + printf (UT_EXTRA_OPTS); - printf (" %s\n", "-H, --hostname=ADDRESS"); - printf (" %s\n", _("Host name argument for servers using host headers (virtual host)")); - printf (" %s\n", _("Append a port to include it in the header (eg: example.com:5000)")); - printf (" %s\n", "-I, --IP-address=ADDRESS"); - printf (" %s\n", _("IP address or name (use numeric address if possible to bypass DNS lookup).")); - printf (" %s\n", "-p, --port=INTEGER"); - printf (" %s", _("Port number (default: ")); - printf ("%d)\n", DEFAULT_HTTP_PORT); + printf (" %s\n", "-H, --hostname=ADDRESS"); + printf (" %s\n", _("Host name argument for servers using host headers (virtual host)")); + printf (" %s\n", _("Append a port to include it in the header (eg: example.com:5000)")); + printf (" %s\n", "-I, --IP-address=ADDRESS"); + printf (" %s\n", _("IP address or name (use numeric address if possible to bypass DNS lookup).")); + printf (" %s\n", "-p, --port=INTEGER"); + printf (" %s", _("Port number (default: ")); + printf ("%d)\n", DEFAULT_HTTP_PORT); #ifdef LIBCURL_FEATURE_SSL - printf (" %s\n", "-S, --ssl=VERSION[+]"); - printf (" %s\n", _("Connect via SSL. Port defaults to 443. VERSION is optional, and prevents")); - printf (" %s\n", _("auto-negotiation (2 = SSLv2, 3 = SSLv3, 1 = TLSv1, 1.1 = TLSv1.1,")); - printf (" %s\n", _("1.2 = TLSv1.2). With a '+' suffix, newer versions are also accepted.")); - printf (" %s\n", _("Note: SSLv2 and SSLv3 are deprecated and are usually disabled in libcurl")); - printf (" %s\n", "--sni"); - printf (" %s\n", _("Enable SSL/TLS hostname extension support (SNI)")); + printf (" %s\n", "-S, --ssl=VERSION[+]"); + printf (" %s\n", _("Connect via SSL. Port defaults to 443. VERSION is optional, and prevents")); + printf (" %s\n", _("auto-negotiation (2 = SSLv2, 3 = SSLv3, 1 = TLSv1, 1.1 = TLSv1.1,")); + printf (" %s\n", _("1.2 = TLSv1.2). With a '+' suffix, newer versions are also accepted.")); + printf (" %s\n", _("Note: SSLv2 and SSLv3 are deprecated and are usually disabled in libcurl")); + printf (" %s\n", "--sni"); + printf (" %s\n", _("Enable SSL/TLS hostname extension support (SNI)")); #if LIBCURL_VERSION_NUM >= 0x071801 - printf (" %s\n", _("Note: --sni is the default in libcurl as SSLv2 and SSLV3 are deprecated and")); - printf (" %s\n", _(" SNI only really works since TLSv1.0")); + printf (" %s\n", _("Note: --sni is the default in libcurl as SSLv2 and SSLV3 are deprecated and")); + printf (" %s\n", _(" SNI only really works since TLSv1.0")); #else - printf (" %s\n", _("Note: SNI is not supported in libcurl before 7.18.1")); + printf (" %s\n", _("Note: SNI is not supported in libcurl before 7.18.1")); #endif - printf (" %s\n", "-C, --certificate"); - printf (" %s\n", _("Check validity of certificate")); - printf (" %s\n", "-J, --client-cert=FILE"); - printf (" %s\n", _("Name of file that contains the client certificate (PEM format)")); - printf (" %s\n", _("to be used in establishing the SSL session")); - printf (" %s\n", "-K, --private-key=FILE"); - printf (" %s\n", _("Name of file containing the private key (PEM format)")); - printf (" %s\n", _("matching the client certificate")); + printf (" %s\n", "-C, --certificate"); + printf (" %s\n", _("Check validity of certificate")); + printf (" %s\n", "-J, --client-cert=FILE"); + printf (" %s\n", _("Name of file that contains the client certificate (PEM format)")); + printf (" %s\n", _("to be used in establishing the SSL session")); + printf (" %s\n", "-K, --private-key=FILE"); + printf (" %s\n", _("Name of file containing the private key (PEM format)")); + printf (" %s\n", _("matching the client certificate")); #endif - printf (" %s\n", "-s, --string=STRING"); - printf (" %s\n", _("String to expect in the content")); - printf (" %s\n", "-u, --url=PATH"); - printf (" %s\n", _("URL to GET or POST (default: /)")); + printf (" %s\n", "-s, --string=STRING"); + printf (" %s\n", _("String to expect in the content")); + printf (" %s\n", "-u, --url=PATH"); + printf (" %s\n", _("URL to GET or POST (default: /)")); - printf (" %s\n", "-a, --authorization=AUTH_PAIR"); - printf (" %s\n", _("Username:password on sites with basic authentication")); - printf (" %s\n", "-A, --useragent=STRING"); - printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); - printf (" %s\n", "-f, --onredirect="); - printf (" %s\n", _("How to handle redirected pages. sticky is like follow but stick to the")); - printf (" %s\n", _("specified IP address. stickyport also ensures port stays the same.")); + printf (" %s\n", "-a, --authorization=AUTH_PAIR"); + printf (" %s\n", _("Username:password on sites with basic authentication")); + printf (" %s\n", "-A, --useragent=STRING"); + printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); + printf (" %s\n", "-f, --onredirect="); + printf (" %s\n", _("How to handle redirected pages. sticky is like follow but stick to the")); + printf (" %s\n", _("specified IP address. stickyport also ensures port stays the same.")); - printf (UT_WARN_CRIT); + printf (UT_WARN_CRIT); - printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); + printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); - printf (UT_VERBOSE); + printf (UT_VERBOSE); - printf (UT_SUPPORT); + printf (UT_SUPPORT); } void print_usage (void) { - printf ("%s\n", _("Usage:")); - printf (" %s -H | -I [-u ] [-p ]\n",progname); - printf (" [-J ] [-K ]\n"); - printf (" [-w ] [-c ] [-t ] [-a auth]\n"); - printf (" [-f ]\n"); - printf (" [-A string] [-S ] [-C]\n"); - printf (" [-v verbose]\n", progname); - printf ("\n"); - printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); - printf ("%s\n\n", _("check_http if you need a stable version.")); + printf ("%s\n", _("Usage:")); + printf (" %s -H | -I [-u ] [-p ]\n",progname); + printf (" [-J ] [-K ]\n"); + printf (" [-w ] [-c ] [-t ] [-a auth]\n"); + printf (" [-f ]\n"); + printf (" [-A string] [-S ] [-C]\n"); + printf (" [-v verbose]\n", progname); + printf ("\n"); + printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); + printf ("%s\n\n", _("check_http if you need a stable version.")); } void print_curl_version (void) { - printf( "%s\n", curl_version()); + printf( "%s\n", curl_version()); } int curlhelp_initbuffer (curlhelp_curlbuf *buf) { - buf->bufsize = DEFAULT_BUFFER_SIZE; - buf->buflen = 0; - buf->buf = (char *)malloc ((size_t)buf->bufsize); - if (buf->buf == NULL) return -1; - return 0; + buf->bufsize = DEFAULT_BUFFER_SIZE; + buf->buflen = 0; + buf->buf = (char *)malloc ((size_t)buf->bufsize); + if (buf->buf == NULL) return -1; + return 0; } int curlhelp_buffer_callback (void *buffer, size_t size, size_t nmemb, void *stream) { - curlhelp_curlbuf *buf = (curlhelp_curlbuf *)stream; + curlhelp_curlbuf *buf = (curlhelp_curlbuf *)stream; - while (buf->bufsize < buf->buflen + size * nmemb + 1) { - buf->bufsize *= buf->bufsize * 2; - buf->buf = (char *)realloc (buf->buf, buf->bufsize); - if (buf->buf == NULL) return -1; - } + while (buf->bufsize < buf->buflen + size * nmemb + 1) { + buf->bufsize *= buf->bufsize * 2; + buf->buf = (char *)realloc (buf->buf, buf->bufsize); + if (buf->buf == NULL) return -1; + } - memcpy (buf->buf + buf->buflen, buffer, size * nmemb); - buf->buflen += size * nmemb; - buf->buf[buf->buflen] = '\0'; + memcpy (buf->buf + buf->buflen, buffer, size * nmemb); + buf->buflen += size * nmemb; + buf->buf[buf->buflen] = '\0'; - return (int)(size * nmemb); + return (int)(size * nmemb); } void curlhelp_freebuffer (curlhelp_curlbuf *buf) { - free (buf->buf); - buf->buf = NULL; + free (buf->buf); + buf->buf = NULL; } /* TODO: when redirecting we get more than one HTTP header, make sure @@ -726,76 +712,76 @@ curlhelp_freebuffer (curlhelp_curlbuf *buf) int curlhelp_parse_statusline (char *buf, curlhelp_statusline *status_line) { - char *first_line_end; - char *p; - size_t first_line_len; - char *pp; - - first_line_end = strstr(buf, "\r\n"); - if (first_line_end == NULL) return -1; - - first_line_len = (size_t)(first_line_end - buf); - status_line->first_line = (char *)malloc (first_line_len + 1); - if (status_line->first_line == NULL) return -1; - memcpy (status_line->first_line, buf, first_line_len); - status_line->first_line[first_line_len] = '\0'; - - /* protocol and version: "HTTP/x.x" SP */ - - p = strtok(status_line->first_line, "/"); - if( p == NULL ) { free( status_line->first_line ); return -1; } - if( strcmp( p, "HTTP" ) != 0 ) { free( status_line->first_line ); return -1; } - - p = strtok( NULL, "." ); - if( p == NULL ) { free( status_line->first_line ); return -1; } - status_line->http_major = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } - - p = strtok( NULL, " " ); - if( p == NULL ) { free( status_line->first_line ); return -1; } - status_line->http_minor = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } - - /* status code: "404" or "404.1", then SP */ - - p = strtok( NULL, " ." ); - if( p == NULL ) { free( status_line->first_line ); return -1; } - if( strchr( p, '.' ) != NULL ) { - char *ppp; - ppp = strtok( p, "." ); - status_line->http_code = (int)strtol( ppp, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } - - ppp = strtok( NULL, "" ); - status_line->http_subcode = (int)strtol( ppp, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } - } else { - status_line->http_code = (int)strtol( p, &pp, 10 ); - status_line->http_subcode = -1; - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } - } - - /* Human readable message: "Not Found" CRLF */ - - p = strtok( NULL, "" ); - if( p == NULL ) { free( status_line->first_line ); return -1; } - status_line->msg = p; - - return 0; + char *first_line_end; + char *p; + size_t first_line_len; + char *pp; + + first_line_end = strstr(buf, "\r\n"); + if (first_line_end == NULL) return -1; + + first_line_len = (size_t)(first_line_end - buf); + status_line->first_line = (char *)malloc (first_line_len + 1); + if (status_line->first_line == NULL) return -1; + memcpy (status_line->first_line, buf, first_line_len); + status_line->first_line[first_line_len] = '\0'; + + /* protocol and version: "HTTP/x.x" SP */ + + p = strtok(status_line->first_line, "/"); + if( p == NULL ) { free( status_line->first_line ); return -1; } + if( strcmp( p, "HTTP" ) != 0 ) { free( status_line->first_line ); return -1; } + + p = strtok( NULL, "." ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->http_major = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + p = strtok( NULL, " " ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->http_minor = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + /* status code: "404" or "404.1", then SP */ + + p = strtok( NULL, " ." ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + if( strchr( p, '.' ) != NULL ) { + char *ppp; + ppp = strtok( p, "." ); + status_line->http_code = (int)strtol( ppp, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + + ppp = strtok( NULL, "" ); + status_line->http_subcode = (int)strtol( ppp, &pp, 10 ); + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + } else { + status_line->http_code = (int)strtol( p, &pp, 10 ); + status_line->http_subcode = -1; + if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + } + + /* Human readable message: "Not Found" CRLF */ + + p = strtok( NULL, "" ); + if( p == NULL ) { free( status_line->first_line ); return -1; } + status_line->msg = p; + + return 0; } void curlhelp_free_statusline (curlhelp_statusline *status_line) { - free (status_line->first_line); + free (status_line->first_line); } void remove_newlines (char *s) { - char *p; + char *p; - for (p = s; *p != '\0'; p++) - if (*p == '\r' || *p == '\n') - *p = ' '; + for (p = s; *p != '\0'; p++) + if (*p == '\r' || *p == '\n') + *p = ' '; } -- cgit v0.10-9-g596f From cefe325e947ec9023bdf6235e3f8568ed69d7c2d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 20 Jan 2017 20:33:00 +0100 Subject: some comment cleanup diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8ed1aee..45a52f0 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -32,8 +32,8 @@ * * *****************************************************************************/ - const char *progname = "check_curl"; + const char *copyright = "2006-2017"; const char *email = "devel@monitoring-plugins.org"; @@ -200,9 +200,10 @@ main (int argc, char **argv) /* backward-compatible behaviour, be tolerant in checks */ if (!check_cert) { - //TODO: depending on more options have aspects we want - //to be tolerant about - //curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); + /* TODO: depending on more options have aspects we want + * to be tolerant about + * curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); + */ curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); } @@ -230,9 +231,9 @@ main (int argc, char **argv) */ /* TODO: --cacert: CA certificate file to verify SSL connection against (SSL) */ - //~ if( args_info.cacert_given ) { - //~ curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); - //~ } + /* if( args_info.cacert_given ) { + curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); + } */ /* handle redirections */ if (onredirect == STATE_DEPENDENT) { @@ -266,8 +267,8 @@ main (int argc, char **argv) snprintf (perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;%.6g size=%dB;;;0", total_time, 0.0, 0.0, - //~ args_info.warning_given ? args_info.warning_arg : 0.0, - //~ args_info.critical_given ? args_info.critical_arg : 0.0, + ( warning_thresholds != NULL ) ? (double)thlds->warning->end : 0.0, + critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, 0.0, (int)body_buf.buflen); @@ -340,7 +341,7 @@ main (int argc, char **argv) /* -w, -c: check warning and critical level */ result = max_state_alt(get_status(total_time, thlds), result); - //~ die (result, "HTTP %s: %s\n", state_text(result), msg); + /* TODO: separate _() msg and status code: die (result, "HTTP %s: %s\n", state_text(result), msg); */ die (result, "HTTP %s HTTP/%d.%d %d %s - %s - %.3g seconds response time|%s\n", state_text(result), status_line.http_major, status_line.http_minor, status_line.http_code, status_line.msg, msg, @@ -513,12 +514,6 @@ process_arguments (int argc, char **argv) else if (!strcmp (optarg, "follow")) onredirect = STATE_DEPENDENT; else usage2 (_("Invalid onredirect option"), optarg); - //~ if (!strcmp (optarg, "stickyport")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST|STICKY_PORT; - //~ else if (!strcmp (optarg, "sticky")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_HOST; - //~ else if (!strcmp (optarg, "follow")) - //~ onredirect = STATE_DEPENDENT, followsticky = STICKY_NONE; if (verbose >= 2) printf(_("* Following redirects set to %s\n"), state_text(onredirect)); break; @@ -637,9 +632,8 @@ print_help (void) printf (" %s\n", _("Username:password on sites with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); - printf (" %s\n", "-f, --onredirect="); - printf (" %s\n", _("How to handle redirected pages. sticky is like follow but stick to the")); - printf (" %s\n", _("specified IP address. stickyport also ensures port stays the same.")); + printf (" %s\n", "-f, --onredirect="); + printf (" %s\n", _("How to handle redirected pages.")); printf (UT_WARN_CRIT); -- cgit v0.10-9-g596f From 035fe1eb79787e01f4f393dc5713fbbe56ce7cee Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 21 Jan 2017 10:33:32 +0100 Subject: handling last HTTP header correctly in HTTP line parser (added a strrstr replacement) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 45a52f0..30c947f 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -114,7 +114,7 @@ int curlhelp_initbuffer (curlhelp_curlbuf*); int curlhelp_buffer_callback (void*, size_t , size_t , void*); void curlhelp_freebuffer (curlhelp_curlbuf*); -int curlhelp_parse_statusline (char*, curlhelp_statusline *); +int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); void remove_newlines (char *); @@ -700,17 +700,58 @@ curlhelp_freebuffer (curlhelp_curlbuf *buf) buf->buf = NULL; } -/* TODO: when redirecting we get more than one HTTP header, make sure - * we parse the last one +/* TODO: should be moved into 'gl' and should be probed, glibc has + * a strrstr */ +const char* +strrstr2(const char *haystack, const char *needle) +{ + int counter; + size_t len; + const char *prev_pos; + const char *pos; + + if (haystack == NULL || needle == NULL) + return NULL; + + if (haystack[0] == '\0' || needle[0] == '\0') + return NULL; + + counter = 0; + prev_pos = NULL; + pos = haystack; + len = strlen (needle); + for (;;) { + pos = strstr (pos, needle); + if (pos == NULL) { + if (counter == 0) + return NULL; + else + return prev_pos; + } + counter++; + prev_pos = pos; + pos += len; + if (*pos == '\0') return prev_pos; + } +} + int -curlhelp_parse_statusline (char *buf, curlhelp_statusline *status_line) +curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) { char *first_line_end; char *p; size_t first_line_len; char *pp; + const char *start; + /* find last start of a new header */ + start = strrstr2 (buf, "\r\nHTTP"); + if (start != NULL) { + start += 2; + buf = start; + } + first_line_end = strstr(buf, "\r\n"); if (first_line_end == NULL) return -1; -- cgit v0.10-9-g596f From 556924316a413c53afd8c2c9eee5d5b5e1061a05 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 21 Jan 2017 13:16:13 +0100 Subject: added -ca-file option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 30c947f..3b4f2ed 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -105,6 +105,7 @@ int check_cert = FALSE; int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; +char *ca_cert = NULL; int process_arguments (int, char**); void print_help (void); @@ -192,6 +193,8 @@ main (int argc, char **argv) curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert); if (client_privkey) curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey); + if (ca_cert) + curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert); /* per default if we have a CA verify both the peer and the * hostname in the certificate, can be switched off later */ @@ -372,7 +375,8 @@ process_arguments (int argc, char **argv) int c; enum { - SNI_OPTION + SNI_OPTION = CHAR_MAX + 1, + CA_CERT_OPTION }; int option=0; @@ -387,6 +391,7 @@ process_arguments (int argc, char **argv) {"onredirect", required_argument, 0, 'f'}, {"client-cert", required_argument, 0, 'J'}, {"private-key", required_argument, 0, 'K'}, + {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, {"certificate", required_argument, 0, 'C'}, {0, 0, 0, 0} @@ -469,6 +474,12 @@ process_arguments (int argc, char **argv) client_privkey = optarg; goto enable_ssl; #endif +#ifdef LIBCURL_FEATURE_SSL + case CA_CERT_OPTION: /* use CA chain file */ + test_file(optarg); + ca_cert = optarg; + goto enable_ssl; +#endif case 'S': /* use SSL */ #ifdef LIBCURL_FEATURE_SSL enable_ssl: @@ -621,6 +632,8 @@ print_help (void) printf (" %s\n", "-K, --private-key=FILE"); printf (" %s\n", _("Name of file containing the private key (PEM format)")); printf (" %s\n", _("matching the client certificate")); + printf (" %s\n", "--ca-cert=FILE"); + printf (" %s\n", _("CA certificate file to verify peer against")); #endif printf (" %s\n", "-s, --string=STRING"); @@ -649,7 +662,7 @@ print_usage (void) { printf ("%s\n", _("Usage:")); printf (" %s -H | -I [-u ] [-p ]\n",progname); - printf (" [-J ] [-K ]\n"); + printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-A string] [-S ] [-C]\n"); -- cgit v0.10-9-g596f From ad9233ce1c41d4459a2843903872a47a5ac4b45d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 22 Jan 2017 10:00:09 +0100 Subject: added -r and --invert-regex diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3b4f2ed..a0e6d8f 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -49,9 +49,11 @@ const char *email = "devel@monitoring-plugins.org"; #define DEFAULT_BUFFER_SIZE 2048 #define DEFAULT_SERVER_URL "/" -#define DEFAULT_HTTP_PORT 80 -#define DEFAULT_HTTPS_PORT 443 -#define MAX_PORT 65535 +enum { + HTTP_PORT = 80, + HTTPS_PORT = 443, + MAX_PORT = 65535 +}; /* for buffers for header and body */ typedef struct { @@ -72,10 +74,22 @@ typedef struct { char *first_line; /* a copy of the first line */ } curlhelp_statusline; +enum { + REGS = 2, + MAX_RE_SIZE = 256 +}; +#include "regex.h" +regex_t preg; +regmatch_t pmatch[REGS]; +char regexp[MAX_RE_SIZE]; +int cflags = REG_NOSUB | REG_EXTENDED | REG_NEWLINE; +int errcode; +int invert_regex = 0; + char *server_address; char *host_name; char *server_url = DEFAULT_SERVER_URL; -unsigned short server_port = DEFAULT_HTTP_PORT; +unsigned short server_port = HTTP_PORT; char output_string_search[30] = ""; char *warning_thresholds = NULL; char *critical_thresholds = NULL; @@ -341,6 +355,27 @@ main (int argc, char **argv) } } + if (strlen (regexp)) { + errcode = regexec (&preg, body_buf.buf, REGS, pmatch, 0); + if ((errcode == 0 && invert_regex == 0) || (errcode == REG_NOMATCH && invert_regex == 1)) { + /* OK - No-op to avoid changing the logic around it */ + result = max_state_alt(STATE_OK, result); + } + else if ((errcode == REG_NOMATCH && invert_regex == 0) || (errcode == 0 && invert_regex == 1)) { + if (invert_regex == 0) + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern not found"), msg); + else + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern found"), msg); + result = STATE_CRITICAL; + } + else { + /* FIXME: Shouldn't that be UNKNOWN? */ + regerror (errcode, &preg, errbuf, MAX_INPUT_BUFFER); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sExecute Error: %s, "), msg, errbuf); + result = STATE_CRITICAL; + } + } + /* -w, -c: check warning and critical level */ result = max_state_alt(get_status(total_time, thlds), result); @@ -375,7 +410,8 @@ process_arguments (int argc, char **argv) int c; enum { - SNI_OPTION = CHAR_MAX + 1, + INVERT_REGEX = CHAR_MAX + 1, + SNI_OPTION, CA_CERT_OPTION }; @@ -388,6 +424,7 @@ process_arguments (int argc, char **argv) {"port", required_argument, 0, 'p'}, {"authorization", required_argument, 0, 'a'}, {"string", required_argument, 0, 's'}, + {"regex", required_argument, 0, 'r'}, {"onredirect", required_argument, 0, 'f'}, {"client-cert", required_argument, 0, 'J'}, {"private-key", required_argument, 0, 'K'}, @@ -401,7 +438,7 @@ process_arguments (int argc, char **argv) usage ("\n"); while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:u:f:C:J:K:S::", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -503,8 +540,8 @@ process_arguments (int argc, char **argv) else usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); } - if (server_port == DEFAULT_HTTP_PORT) - server_port = DEFAULT_HTTPS_PORT; + if (server_port == HTTP_PORT) + server_port = HTTPS_PORT; #else /* -C -J and -K fall through to here without SSL */ usage4 (_("Invalid option - SSL is not available")); @@ -532,6 +569,19 @@ process_arguments (int argc, char **argv) strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); string_expect[MAX_INPUT_BUFFER - 1] = 0; break; + case 'r': /* regex */ + strncpy (regexp, optarg, MAX_RE_SIZE - 1); + regexp[MAX_RE_SIZE - 1] = 0; + errcode = regcomp (&preg, regexp, cflags); + if (errcode != 0) { + (void) regerror (errcode, &preg, errbuf, MAX_INPUT_BUFFER); + printf (_("Could Not Compile Regular Expression: %s"), errbuf); + return ERROR; + } + break; + case INVERT_REGEX: + invert_regex = 1; + break; case '?': /* print short usage statement if args not parsable */ usage5 (); @@ -608,7 +658,7 @@ print_help (void) printf (" %s\n", _("IP address or name (use numeric address if possible to bypass DNS lookup).")); printf (" %s\n", "-p, --port=INTEGER"); printf (" %s", _("Port number (default: ")); - printf ("%d)\n", DEFAULT_HTTP_PORT); + printf ("%d)\n", HTTP_PORT); #ifdef LIBCURL_FEATURE_SSL printf (" %s\n", "-S, --ssl=VERSION[+]"); @@ -640,7 +690,8 @@ print_help (void) printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); printf (" %s\n", _("URL to GET or POST (default: /)")); - + printf (" %s\n", "-r, --regex, --ereg=STRING"); + printf (" %s\n", _("Search page for regex STRING")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); printf (" %s\n", _("Username:password on sites with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); @@ -654,6 +705,53 @@ print_help (void) printf (UT_VERBOSE); + printf ("\n"); + printf ("%s\n", _("Notes:")); + printf (" %s\n", _("This plugin will attempt to open an HTTP connection with the host.")); + printf (" %s\n", _("Successful connects return STATE_OK, refusals and timeouts return STATE_CRITICAL")); + printf (" %s\n", _("other errors return STATE_UNKNOWN. Successful connects, but incorrect response")); + printf (" %s\n", _("messages from the host result in STATE_WARNING return values. If you are")); + printf (" %s\n", _("checking a virtual server that uses 'host headers' you must supply the FQDN")); + printf (" %s\n", _("(fully qualified domain name) as the [host_name] argument.")); + +#ifdef LIBCURL_FEATURE_SSL + printf ("\n"); + printf (" %s\n", _("This plugin can also check whether an SSL enabled web server is able to")); + printf (" %s\n", _("serve content (optionally within a specified time) or whether the X509 ")); + printf (" %s\n", _("certificate is still valid for the specified number of days.")); + printf ("\n"); + printf (" %s\n", _("Please note that this plugin does not check if the presented server")); + printf (" %s\n", _("certificate matches the hostname of the server, or if the certificate")); + printf (" %s\n", _("has a valid chain of trust to one of the locally installed CAs.")); + printf ("\n"); + printf ("%s\n", _("Examples:")); + printf (" %s\n\n", "CHECK CONTENT: check_http -w 5 -c 10 --ssl -H www.verisign.com"); + printf (" %s\n", _("When the 'www.verisign.com' server returns its content within 5 seconds,")); + printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); + printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); + printf (" %s\n", _("a STATE_CRITICAL will be returned.")); + printf ("\n"); + printf (" %s\n\n", "CHECK CERTIFICATE: check_http -H www.verisign.com -C 14"); + printf (" %s\n", _("When the certificate of 'www.verisign.com' is valid for more than 14 days,")); + printf (" %s\n", _("a STATE_OK is returned. When the certificate is still valid, but for less than")); + printf (" %s\n", _("14 days, a STATE_WARNING is returned. A STATE_CRITICAL will be returned when")); + printf (" %s\n\n", _("the certificate is expired.")); + printf ("\n"); + printf (" %s\n\n", "CHECK CERTIFICATE: check_http -H www.verisign.com -C 30,14"); + printf (" %s\n", _("When the certificate of 'www.verisign.com' is valid for more than 30 days,")); + printf (" %s\n", _("a STATE_OK is returned. When the certificate is still valid, but for less than")); + printf (" %s\n", _("30 days, but more than 14 days, a STATE_WARNING is returned.")); + printf (" %s\n", _("A STATE_CRITICAL will be returned when certificate expires in less than 14 days")); + + printf (" %s\n\n", "CHECK SSL WEBSERVER CONTENT VIA PROXY USING HTTP 1.1 CONNECT: "); + printf (" %s\n", _("check_http -I 192.168.100.35 -p 80 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); + printf (" %s\n", _("all these options are needed: -I -p -u -S(sl) -j CONNECT -H ")); + printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); + printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); + printf (" %s\n", _("a STATE_CRITICAL will be returned.")); + +#endif + printf (UT_SUPPORT); } @@ -665,6 +763,7 @@ print_usage (void) printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-a auth]\n"); printf (" [-f ]\n"); + printf (" [-s string] [-r \n"); printf (" [-A string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); printf ("\n"); -- cgit v0.10-9-g596f From c9a94ffd44d01b70bed3b062167b9aaab4e41244 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 22 Jan 2017 10:02:55 +0100 Subject: added some casts for curl write functions diff --git a/plugins/check_curl.c b/plugins/check_curl.c index a0e6d8f..cd77be3 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -168,13 +168,13 @@ main (int argc, char **argv) /* initialize buffer for body of the answer */ if (curlhelp_initbuffer(&body_buf) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); - curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, (curl_write_callback)curlhelp_buffer_callback); curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); /* initialize buffer for header of the answer */ if (curlhelp_initbuffer( &header_buf ) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); - curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, (curl_write_callback)curlhelp_buffer_callback); curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); /* set the error buffer */ -- cgit v0.10-9-g596f From 83ae37dc7ea9a0527927339d378bad294a972011 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 22 Jan 2017 10:07:20 +0100 Subject: forgot declaration of INVERT_REGEX in getopt otions diff --git a/plugins/check_curl.c b/plugins/check_curl.c index cd77be3..1b9064e 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -430,6 +430,7 @@ process_arguments (int argc, char **argv) {"private-key", required_argument, 0, 'K'}, {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, + {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"certificate", required_argument, 0, 'C'}, {0, 0, 0, 0} }; -- cgit v0.10-9-g596f From d74e9569b9b71f580760d44256b4f8140a29b058 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 12 Mar 2017 13:34:46 +0100 Subject: added HTTP method handling diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 1b9064e..209b449 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -96,6 +96,7 @@ char *critical_thresholds = NULL; thresholds *thlds; char user_agent[DEFAULT_BUFFER_SIZE]; int verbose = 0; +char *http_method = NULL; CURL *curl; struct curl_slist *header_list = NULL; curlhelp_curlbuf body_buf; @@ -122,6 +123,7 @@ char *client_privkey = NULL; char *ca_cert = NULL; int process_arguments (int, char**); +int check_http (void); void print_help (void); void print_usage (void); void print_curl_version (void); @@ -138,7 +140,7 @@ void test_file (char *); int main (int argc, char **argv) { - int result = STATE_OK; + int result = STATE_UNKNOWN; setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); @@ -155,6 +157,15 @@ main (int argc, char **argv) if (process_arguments (argc, argv) == ERROR) usage4 (_("Could not parse arguments")); + result = check_http (); + return result; +} + +int +check_http (void) +{ + int result = STATE_OK; + /* initialize curl */ if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_global_init failed\n"); @@ -192,11 +203,26 @@ main (int argc, char **argv) /* set port */ curl_easy_setopt (curl, CURLOPT_PORT, server_port); - /* compose HTTP headers */ + /* set HTTP method */ + if (http_method) { + if (!strcmp(http_method, "POST")) + curl_easy_setopt (curl, CURLOPT_POST, 1); + else if (!strcmp(http_method, "PUT")) + curl_easy_setopt (curl, CURLOPT_PUT, 1); + curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method); + } + + /* set hostname (virtual hosts) */ snprintf (http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); header_list = curl_slist_append (header_list, http_header); - curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); + /* always close connection, be nice to servers */ + snprintf (http_header, DEFAULT_BUFFER_SIZE, "Connection: close"); + header_list = curl_slist_append (header_list, http_header); + + /* set HTTP headers */ + curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); + /* set SSL version, warn about unsecure or unsupported versions */ if (use_ssl) { curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); @@ -407,7 +433,7 @@ test_file (char *path) int process_arguments (int argc, char **argv) { - int c; + int c = 1; enum { INVERT_REGEX = CHAR_MAX + 1, @@ -415,10 +441,12 @@ process_arguments (int argc, char **argv) CA_CERT_OPTION }; - int option=0; + int option = 0; static struct option longopts[] = { + STD_LONG_OPTS, {"ssl", optional_argument, 0, 'S'}, {"sni", no_argument, 0, SNI_OPTION}, + {"method", required_argument, 0, 'j'}, {"IP-address", required_argument, 0, 'I'}, {"url", required_argument, 0, 'u'}, {"port", required_argument, 0, 'p'}, @@ -426,20 +454,20 @@ process_arguments (int argc, char **argv) {"string", required_argument, 0, 's'}, {"regex", required_argument, 0, 'r'}, {"onredirect", required_argument, 0, 'f'}, + {"certificate", required_argument, 0, 'C'}, {"client-cert", required_argument, 0, 'J'}, {"private-key", required_argument, 0, 'K'}, {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, - {"certificate", required_argument, 0, 'C'}, {0, 0, 0, 0} }; if (argc < 2) - usage ("\n"); + return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:H:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:H:j:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -490,6 +518,11 @@ process_arguments (int argc, char **argv) strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); user_auth[MAX_INPUT_BUFFER - 1] = 0; break; + case 'j': /* Set HTTP method */ + if (http_method) + free(http_method); + http_method = strdup (optarg); + break; case 'A': /* useragent */ snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); break; @@ -612,8 +645,8 @@ process_arguments (int argc, char **argv) if (verbose >= 2) printf ("* Socket timeout set to %d seconds\n", socket_timeout); - //~ if (http_method == NULL) - //~ http_method = strdup ("GET"); + if (http_method == NULL) + http_method = strdup ("GET"); if (client_cert && !client_privkey) usage4 (_("If you use a client certificate you must also specify a private key file")); @@ -627,7 +660,7 @@ process_arguments (int argc, char **argv) void print_help (void) { - print_revision(progname, NP_VERSION); + print_revision (progname, NP_VERSION); printf ("Copyright (c) 1999 Ethan Galstad \n"); printf ("Copyright (c) 2017 Andreas Baumann \n"); @@ -643,7 +676,7 @@ print_help (void) printf ("\n\n"); - print_usage(); + print_usage (); printf (_("NOTE: One or both of -H and -I must be specified")); @@ -691,6 +724,8 @@ print_help (void) printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); printf (" %s\n", _("URL to GET or POST (default: /)")); + printf (" %s\n", "-j, --method=STRING (for example: HEAD, OPTIONS, TRACE, PUT, DELETE, CONNECT)"); + printf (" %s\n", _("Set HTTP method.")); printf (" %s\n", "-r, --regex, --ereg=STRING"); printf (" %s\n", _("Search page for regex STRING")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); @@ -726,26 +761,26 @@ print_help (void) printf (" %s\n", _("has a valid chain of trust to one of the locally installed CAs.")); printf ("\n"); printf ("%s\n", _("Examples:")); - printf (" %s\n\n", "CHECK CONTENT: check_http -w 5 -c 10 --ssl -H www.verisign.com"); + printf (" %s\n\n", "CHECK CONTENT: check_curl -w 5 -c 10 --ssl -H www.verisign.com"); printf (" %s\n", _("When the 'www.verisign.com' server returns its content within 5 seconds,")); printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); printf (" %s\n", _("a STATE_CRITICAL will be returned.")); printf ("\n"); - printf (" %s\n\n", "CHECK CERTIFICATE: check_http -H www.verisign.com -C 14"); + printf (" %s\n\n", "CHECK CERTIFICATE: check_curl -H www.verisign.com -C 14"); printf (" %s\n", _("When the certificate of 'www.verisign.com' is valid for more than 14 days,")); printf (" %s\n", _("a STATE_OK is returned. When the certificate is still valid, but for less than")); printf (" %s\n", _("14 days, a STATE_WARNING is returned. A STATE_CRITICAL will be returned when")); printf (" %s\n\n", _("the certificate is expired.")); printf ("\n"); - printf (" %s\n\n", "CHECK CERTIFICATE: check_http -H www.verisign.com -C 30,14"); + printf (" %s\n\n", "CHECK CERTIFICATE: check_curl -H www.verisign.com -C 30,14"); printf (" %s\n", _("When the certificate of 'www.verisign.com' is valid for more than 30 days,")); printf (" %s\n", _("a STATE_OK is returned. When the certificate is still valid, but for less than")); printf (" %s\n", _("30 days, but more than 14 days, a STATE_WARNING is returned.")); printf (" %s\n", _("A STATE_CRITICAL will be returned when certificate expires in less than 14 days")); printf (" %s\n\n", "CHECK SSL WEBSERVER CONTENT VIA PROXY USING HTTP 1.1 CONNECT: "); - printf (" %s\n", _("check_http -I 192.168.100.35 -p 80 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); + printf (" %s\n", _("check_curl -I 192.168.100.35 -p 80 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); printf (" %s\n", _("all these options are needed: -I -p -u -S(sl) -j CONNECT -H ")); printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); @@ -754,8 +789,11 @@ print_help (void) #endif printf (UT_SUPPORT); + } + + void print_usage (void) { -- cgit v0.10-9-g596f From c6c4890702ef7095557b38ffda1531285902af42 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 14 Mar 2017 20:29:17 +0100 Subject: check_curl: implement optional http headers Signed-off-by: Sven Nierlein diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 209b449..c6a7ab8 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -103,6 +103,7 @@ curlhelp_curlbuf body_buf; curlhelp_curlbuf header_buf; curlhelp_statusline status_line; char http_header[DEFAULT_BUFFER_SIZE]; +struct curl_slist *http_opt_headers = NULL; long code; long socket_timeout = DEFAULT_SOCKET_TIMEOUT; double total_time; @@ -219,10 +220,10 @@ check_http (void) /* always close connection, be nice to servers */ snprintf (http_header, DEFAULT_BUFFER_SIZE, "Connection: close"); header_list = curl_slist_append (header_list, http_header); - - /* set HTTP headers */ + + /* set HTTP headers */ curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); - + /* set SSL version, warn about unsecure or unsupported versions */ if (use_ssl) { curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); @@ -289,11 +290,15 @@ check_http (void) */ } + /* set optional http header */ + curl_easy_setopt(curl, CURLOPT_HTTPHEADER, http_opt_headers); + /* do the request */ res = curl_easy_perform(curl); /* free header list, we don't need it anymore */ - curl_slist_free_all (header_list); + curl_slist_free_all(header_list); + curl_slist_free_all(http_opt_headers); /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { @@ -460,6 +465,7 @@ process_arguments (int argc, char **argv) {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, + {"header", required_argument, 0, 'k'}, {0, 0, 0, 0} }; @@ -467,7 +473,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:H:j:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -526,6 +532,9 @@ process_arguments (int argc, char **argv) case 'A': /* useragent */ snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); break; + case 'k': /* Additional headers */ + http_opt_headers = curl_slist_append(http_opt_headers, optarg); + break; case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL /* TODO: C:, check age of certificate for backward compatible @@ -854,20 +863,20 @@ curlhelp_freebuffer (curlhelp_curlbuf *buf) /* TODO: should be moved into 'gl' and should be probed, glibc has * a strrstr */ -const char* +const char* strrstr2(const char *haystack, const char *needle) { int counter; size_t len; const char *prev_pos; const char *pos; - + if (haystack == NULL || needle == NULL) return NULL; - + if (haystack[0] == '\0' || needle[0] == '\0') return NULL; - + counter = 0; prev_pos = NULL; pos = haystack; @@ -902,7 +911,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) start += 2; buf = start; } - + first_line_end = strstr(buf, "\r\n"); if (first_line_end == NULL) return -1; -- cgit v0.10-9-g596f From 16121a9b5526aa751f77a2d5ec3f15755f99b291 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 14 Mar 2017 22:52:04 +0100 Subject: check_curl: implement certificate checks Signed-off-by: Sven Nierlein diff --git a/plugins/Makefile.am b/plugins/Makefile.am index 2c87b4e..ffd8baf 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -71,7 +71,7 @@ check_apt_LDADD = $(BASEOBJS) check_cluster_LDADD = $(BASEOBJS) check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) -check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) +check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) check_dbi_LDADD = $(NETLIBS) $(DBILIBS) check_dig_LDADD = $(NETLIBS) check_disk_LDADD = $(BASEOBJS) @@ -92,7 +92,7 @@ check_mysql_query_CFLAGS = $(AM_CFLAGS) $(MYSQLCFLAGS) check_mysql_query_CPPFLAGS = $(AM_CPPFLAGS) $(MYSQLINCLUDE) check_mysql_query_LDADD = $(NETLIBS) $(MYSQLLIBS) check_nagios_LDADD = $(BASEOBJS) -check_nt_LDADD = $(NETLIBS) +check_nt_LDADD = $(NETLIBS) check_ntp_LDADD = $(NETLIBS) $(MATHLIBS) check_ntp_peer_LDADD = $(NETLIBS) $(MATHLIBS) check_nwstat_LDADD = $(NETLIBS) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index c6a7ab8..e14fb19 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -93,6 +93,7 @@ unsigned short server_port = HTTP_PORT; char output_string_search[30] = ""; char *warning_thresholds = NULL; char *critical_thresholds = NULL; +int days_till_exp_warn, days_till_exp_crit; thresholds *thlds; char user_agent[DEFAULT_BUFFER_SIZE]; int verbose = 0; @@ -122,6 +123,7 @@ int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; +X509 *cert = NULL; int process_arguments (int, char**); int check_http (void); @@ -162,6 +164,19 @@ main (int argc, char **argv) return result; } +int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) +{ + cert = X509_STORE_CTX_get_current_cert(x509_ctx); + return 1; +} + +CURLcode sslctxfun(CURL *curl, SSL_CTX *sslctx, void *parm) +{ + SSL_CTX_set_verify(sslctx, SSL_VERIFY_PEER, verify_callback); + + return CURLE_OK; +} + int check_http (void) { @@ -177,6 +192,9 @@ check_http (void) if (verbose >= 3) curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); + /* print everything on stdout like check_http would do */ + curl_easy_setopt(curl, CURLOPT_STDERR, stdout); + /* initialize buffer for body of the answer */ if (curlhelp_initbuffer(&body_buf) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); @@ -242,14 +260,16 @@ check_http (void) curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2); curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2); - /* backward-compatible behaviour, be tolerant in checks */ - if (!check_cert) { - /* TODO: depending on more options have aspects we want - * to be tolerant about - * curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1 ); - */ - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); + /* backward-compatible behaviour, be tolerant in checks + * TODO: depending on more options have aspects we want + * to be less tolerant about ssl verfications + */ + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); + curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); + + /* set callback to extract certificate */ + if(check_cert) { + curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun); } /* set default or user-given user agent identification */ @@ -308,6 +328,16 @@ check_http (void) die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } + /* certificate checks */ +#ifdef HAVE_SSL + if (use_ssl == TRUE) { + if (check_cert == TRUE) { + result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); + return(result); + } + } +#endif /* HAVE_SSL */ + /* we got the data and we executed the request in a given time, so we can append * performance data to the answer always */ @@ -439,6 +469,7 @@ int process_arguments (int argc, char **argv) { int c = 1; + char *temp; enum { INVERT_REGEX = CHAR_MAX + 1, @@ -537,8 +568,23 @@ process_arguments (int argc, char **argv) break; case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL - /* TODO: C:, check age of certificate for backward compatible - * behaviour, but we would later add more check conditions */ + if ((temp=strchr(optarg,','))!=NULL) { + *temp='\0'; + if (!is_intnonneg (optarg)) + usage2 (_("Invalid certificate expiration period"), optarg); + days_till_exp_warn = atoi(optarg); + *temp=','; + temp++; + if (!is_intnonneg (temp)) + usage2 (_("Invalid certificate expiration period"), temp); + days_till_exp_crit = atoi (temp); + } + else { + days_till_exp_crit=0; + if (!is_intnonneg (optarg)) + usage2 (_("Invalid certificate expiration period"), optarg); + days_till_exp_warn = atoi (optarg); + } check_cert = TRUE; goto enable_ssl; #endif diff --git a/plugins/sslutils.c b/plugins/sslutils.c index e38947e..14f6579 100644 --- a/plugins/sslutils.c +++ b/plugins/sslutils.c @@ -1,29 +1,29 @@ /***************************************************************************** -* +* * Monitoring Plugins SSL utilities -* +* * License: GPL * Copyright (c) 2005-2010 Monitoring Plugins Development Team -* +* * Description: -* +* * This file contains common functions for plugins that require SSL. -* +* * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. -* +* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. -* +* * You should have received a copy of the GNU General Public License * along with this program. If not, see . -* -* +* +* *****************************************************************************/ #define MAX_CN_LENGTH 256 @@ -193,12 +193,22 @@ int np_net_ssl_read(void *buf, int num) { int np_net_ssl_check_cert(int days_till_exp_warn, int days_till_exp_crit){ # ifdef USE_OPENSSL - X509 *certificate=NULL; + X509 *certificate = NULL; + certificate=SSL_get_peer_certificate(s); + return(np_net_ssl_check_certificate(certificate, days_till_exp_warn, days_till_exp_crit)); +# else /* ifndef USE_OPENSSL */ + printf("%s\n", _("WARNING - Plugin does not support checking certificates.")); + return STATE_WARNING; +# endif /* USE_OPENSSL */ +} + +int np_net_ssl_check_certificate(X509 *certificate, int days_till_exp_warn, int days_till_exp_crit){ +# ifdef USE_OPENSSL X509_NAME *subj=NULL; char timestamp[50] = ""; char cn[MAX_CN_LENGTH]= ""; char *tz; - + int cnlen =-1; int status=STATE_UNKNOWN; @@ -210,7 +220,6 @@ int np_net_ssl_check_cert(int days_till_exp_warn, int days_till_exp_crit){ int time_remaining; time_t tm_t; - certificate=SSL_get_peer_certificate(s); if (!certificate) { printf("%s\n",_("CRITICAL - Cannot retrieve server certificate.")); return STATE_CRITICAL; -- cgit v0.10-9-g596f From b5fd0d1a17571cf16e788f1e99e8e1061dafe81e Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 14 Mar 2017 23:49:05 +0100 Subject: check_curl: implement extended performance data Signed-off-by: Sven Nierlein diff --git a/plugins/check_curl.c b/plugins/check_curl.c index e14fb19..064fb16 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -97,6 +97,7 @@ int days_till_exp_warn, days_till_exp_crit; thresholds *thlds; char user_agent[DEFAULT_BUFFER_SIZE]; int verbose = 0; +int show_extended_perfdata = FALSE; char *http_method = NULL; CURL *curl; struct curl_slist *header_list = NULL; @@ -108,6 +109,10 @@ struct curl_slist *http_opt_headers = NULL; long code; long socket_timeout = DEFAULT_SOCKET_TIMEOUT; double total_time; +double time_connect; +double time_appconnect; +double time_headers; +double time_firstbyte; char errbuf[CURL_ERROR_SIZE+1]; CURLcode res; char url[DEFAULT_BUFFER_SIZE]; @@ -136,6 +141,7 @@ void curlhelp_freebuffer (curlhelp_curlbuf*); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); +char *perfd_time_ssl (double microsec); void remove_newlines (char *); void test_file (char *); @@ -342,13 +348,30 @@ check_http (void) * performance data to the answer always */ curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time); - snprintf (perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;%.6g size=%dB;;;0", - total_time, - 0.0, 0.0, - ( warning_thresholds != NULL ) ? (double)thlds->warning->end : 0.0, - critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, - 0.0, - (int)body_buf.buflen); + if(show_extended_perfdata) { + curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME, &time_connect); + curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME, &time_appconnect); + curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME, &time_headers); + curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME, &time_firstbyte); + snprintf(perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;; size=%dB;;; time_connect=%.6gs;;;; %s time_headers=%.6gs;;;; time_firstbyte=%.6gs;;;; time_transfer=%.6gs;;;;", + total_time, + warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, + critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, + (int)body_buf.buflen, + time_connect, + use_ssl == TRUE ? perfd_time_ssl(time_appconnect-time_connect) : "", + (time_headers - time_appconnect), + (time_firstbyte - time_headers), + (total_time-time_firstbyte) + ); + } else { + snprintf(perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;; size=%dB;;;", + total_time, + warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, + critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, + (int)body_buf.buflen); + } + /* return a CRITICAL status if we couldn't read any data */ if (strlen(header_buf.buf) == 0 && strlen(body_buf.buf) == 0) @@ -497,6 +520,7 @@ process_arguments (int argc, char **argv) {"useragent", required_argument, 0, 'A'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"header", required_argument, 0, 'k'}, + {"extended-perfdata", no_argument, 0, 'E'}, {0, 0, 0, 0} }; @@ -504,7 +528,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::E", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -671,6 +695,9 @@ process_arguments (int argc, char **argv) case INVERT_REGEX: invert_regex = 1; break; + case 'E': /* show extended perfdata */ + show_extended_perfdata = TRUE; + break; case '?': /* print short usage statement if args not parsable */ usage5 (); @@ -1026,3 +1053,8 @@ remove_newlines (char *s) if (*p == '\r' || *p == '\n') *p = ' '; } + +char *perfd_time_ssl (double elapsed_time_ssl) +{ + return fperfdata ("time_ssl", elapsed_time_ssl, "s", FALSE, 0, FALSE, 0, FALSE, 0, FALSE, 0); +} -- cgit v0.10-9-g596f From e57c8a9d96aa79f847ff0dd2a2f418bfd4f7094d Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 15 Mar 2017 00:32:21 +0100 Subject: check_curl: set correct host header Signed-off-by: Sven Nierlein diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 064fb16..a7e580d 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -90,6 +90,8 @@ char *server_address; char *host_name; char *server_url = DEFAULT_SERVER_URL; unsigned short server_port = HTTP_PORT; +int virtual_port = 0; +int host_name_length; char output_string_search[30] = ""; char *warning_thresholds = NULL; char *critical_thresholds = NULL; @@ -105,7 +107,6 @@ curlhelp_curlbuf body_buf; curlhelp_curlbuf header_buf; curlhelp_statusline status_line; char http_header[DEFAULT_BUFFER_SIZE]; -struct curl_slist *http_opt_headers = NULL; long code; long socket_timeout = DEFAULT_SOCKET_TIMEOUT; double total_time; @@ -195,7 +196,7 @@ check_http (void) if ((curl = curl_easy_init()) == NULL) die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); - if (verbose >= 3) + if (verbose >= 1) curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); /* print everything on stdout like check_http would do */ @@ -238,8 +239,14 @@ check_http (void) } /* set hostname (virtual hosts) */ - snprintf (http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); - header_list = curl_slist_append (header_list, http_header); + if(host_name != NULL) { + if((virtual_port != HTTP_PORT && !use_ssl) || (virtual_port != HTTPS_PORT && use_ssl)) { + snprintf(http_header, DEFAULT_BUFFER_SIZE, "Host: %s:%d", host_name, virtual_port); + } else { + snprintf(http_header, DEFAULT_BUFFER_SIZE, "Host: %s", host_name); + } + header_list = curl_slist_append (header_list, http_header); + } /* always close connection, be nice to servers */ snprintf (http_header, DEFAULT_BUFFER_SIZE, "Connection: close"); @@ -316,15 +323,11 @@ check_http (void) */ } - /* set optional http header */ - curl_easy_setopt(curl, CURLOPT_HTTPHEADER, http_opt_headers); - /* do the request */ res = curl_easy_perform(curl); /* free header list, we don't need it anymore */ curl_slist_free_all(header_list); - curl_slist_free_all(http_opt_headers); /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { @@ -491,6 +494,7 @@ test_file (char *path) int process_arguments (int argc, char **argv) { + char *p; int c = 1; char *temp; @@ -559,6 +563,22 @@ process_arguments (int argc, char **argv) break; case 'H': /* virtual host */ host_name = strdup (optarg); + if (host_name[0] == '[') { + if ((p = strstr (host_name, "]:")) != NULL) { /* [IPv6]:port */ + virtual_port = atoi (p + 2); + /* cut off the port */ + host_name_length = strlen (host_name) - strlen (p) - 1; + free (host_name); + host_name = strndup (optarg, host_name_length); + } + } else if ((p = strchr (host_name, ':')) != NULL + && strchr (++p, ':') == NULL) { /* IPv4:port or host:port */ + virtual_port = atoi (p); + /* cut off the port */ + host_name_length = strlen (host_name) - strlen (p) - 1; + free (host_name); + host_name = strndup (optarg, host_name_length); + } break; case 'I': /* internet address */ server_address = strdup (optarg); @@ -588,7 +608,7 @@ process_arguments (int argc, char **argv) snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); break; case 'k': /* Additional headers */ - http_opt_headers = curl_slist_append(http_opt_headers, optarg); + header_list = curl_slist_append(header_list, optarg); break; case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL @@ -733,8 +753,8 @@ process_arguments (int argc, char **argv) if (client_cert && !client_privkey) usage4 (_("If you use a client certificate you must also specify a private key file")); - //~ if (virtual_port == 0) - //~ virtual_port = server_port; + if (virtual_port == 0) + virtual_port = server_port; return TRUE; } -- cgit v0.10-9-g596f From afa52eb83434b52cec2849cb2a39bc646561f713 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 15 Mar 2017 00:32:47 +0100 Subject: add check_curl test just a copy of check_http for now... Signed-off-by: Sven Nierlein diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t new file mode 100644 index 0000000..3c36a26 --- /dev/null +++ b/plugins/t/check_curl.t @@ -0,0 +1,200 @@ +#! /usr/bin/perl -w -I .. +# +# HyperText Transfer Protocol (HTTP) Test via check_curl +# +# + +use strict; +use Test::More; +use POSIX qw/mktime strftime/; +use NPTest; + +plan tests => 49; + +my $successOutput = '/OK.*HTTP.*second/'; + +my $res; + +my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", + "A host providing the HTTP Service (a web server)", + "localhost" ); + +my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", + "A host providing the HTTPS Service (a tls web server)" ); + +my $host_tls_cert = getTestParameter( "host_tls_cert", "NP_HOST_TLS_CERT", "localhost", + "the common name of the certificate." ); + + +my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", + "The hostname of system not responsive to network requests", + "10.0.0.1" ); + +my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", + "An invalid (not known to DNS) hostname", + "nosuchhost"); + +my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", + "Is this system directly connected to the internet?", + "yes"); + +my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", + "A host providing an index page containing the string 'monitoring'", + "test.monitoring-plugins.org" ); + +my $faketime = -x '/usr/bin/faketime' ? 1 : 0; + + +$res = NPTest->testCmd( + "./check_curl $host_tcp_http -wt 300 -ct 600" + ); +cmp_ok( $res->return_code, '==', 0, "Webserver $host_tcp_http responded" ); +like( $res->output, $successOutput, "Output OK" ); + +$res = NPTest->testCmd( + "./check_curl $host_tcp_http -wt 300 -ct 600 -v -v -v -k 'bob:there' -k 'carl:frown'" + ); +like( $res->output, '/bob:there\r\ncarl:frown\r\n/', "Got headers with multiple -k options" ); + +$res = NPTest->testCmd( + "./check_curl $host_nonresponsive -wt 1 -ct 2 -t 3" + ); +cmp_ok( $res->return_code, '==', 2, "Webserver $host_nonresponsive not responding" ); +cmp_ok( $res->output, 'eq', "CRITICAL - Socket timeout after 3 seconds", "Output OK"); + +$res = NPTest->testCmd( + "./check_curl $hostname_invalid -wt 1 -ct 2" + ); +cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); +# The first part of the message comes from the OS catalogue, so cannot check this. +# On Debian, it is Name or service not known, on Darwin, it is No address associated with nodename +# Is also possible to get a socket timeout if DNS is not responding fast enough +like( $res->output, "/Unable to open TCP socket|Socket timeout after/", "Output OK"); + +# host header checks +$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http"); +like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http:8080 -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http:8080 -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); + +SKIP: { + skip "No internet access", 3 if $internet_access eq "no"; + + $res = NPTest->testCmd("./check_curl -v -H $host_tls_http -S"); + like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); + + $res = NPTest->testCmd("./check_curl -v -H $host_tls_http:8080 -S -p 443"); + like( $res->output, '/^Host: '.$host_tls_http.':8080\s*$/ms', "Host Header OK" ); + + $res = NPTest->testCmd("./check_curl -v -H $host_tls_http:443 -S -p 443"); + like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); +}; + +SKIP: { + skip "No host serving monitoring in index file", 7 unless $host_tcp_http2; + + $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'monitoring'" ); + cmp_ok( $res->return_code, "==", 0, "Got a reference to 'monitoring'"); + + $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'mONiTORing'" ); + cmp_ok( $res->return_code, "==", 2, "Not got 'mONiTORing'"); + like ( $res->output, "/pattern not found/", "Error message says 'pattern not found'"); + + $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -R 'mONiTORing'" ); + cmp_ok( $res->return_code, "==", 0, "But case insensitive doesn't mind 'mONiTORing'"); + + $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'monitoring' --invert-regex" ); + cmp_ok( $res->return_code, "==", 2, "Invert results work when found"); + like ( $res->output, "/pattern found/", "Error message says 'pattern found'"); + + $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'mONiTORing' --invert-regex" ); + cmp_ok( $res->return_code, "==", 0, "And also when not found"); +} +SKIP: { + skip "No internet access", 16 if $internet_access eq "no"; + + $res = NPTest->testCmd( + "./check_curl --ssl $host_tls_http" + ); + cmp_ok( $res->return_code, '==', 0, "Can read https for $host_tls_http" ); + + $res = NPTest->testCmd( "./check_curl -C 1 --ssl $host_tls_http" ); + cmp_ok( $res->return_code, '==', 0, "Checking certificate for $host_tls_http"); + like ( $res->output, "/Certificate '$host_tls_cert' will expire on/", "Output OK" ); + my $saved_cert_output = $res->output; + + $res = NPTest->testCmd( "./check_curl -C 8000,1 --ssl $host_tls_http" ); + cmp_ok( $res->return_code, '==', 1, "Checking certificate for $host_tls_http"); + like ( $res->output, qr/WARNING - Certificate '$host_tls_cert' expires in \d+ day/, "Output Warning" ); + + $res = NPTest->testCmd( "./check_curl $host_tls_http -C 1" ); + is( $res->return_code, 0, "Old syntax for cert checking okay" ); + is( $res->output, $saved_cert_output, "Same output as new syntax" ); + + $res = NPTest->testCmd( "./check_curl -H $host_tls_http -C 1" ); + is( $res->return_code, 0, "Updated syntax for cert checking okay" ); + is( $res->output, $saved_cert_output, "Same output as new syntax" ); + + $res = NPTest->testCmd( "./check_curl -C 1 $host_tls_http" ); + cmp_ok( $res->output, 'eq', $saved_cert_output, "--ssl option automatically added"); + + $res = NPTest->testCmd( "./check_curl $host_tls_http -C 1" ); + cmp_ok( $res->output, 'eq', $saved_cert_output, "Old syntax for cert checking still works"); + + # run some certificate checks with faketime + SKIP: { + skip "No faketime binary found", 12 if !$faketime; + $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); + is( $res->return_code, 0, "Catch cert output exit code" ); + my($mon,$day,$hour,$min,$sec,$year) = ($res->output =~ /(\w+)\s+(\d+)\s+(\d+):(\d+):(\d+)\s+(\d+)/); + if(!defined $year) { + die("parsing date failed from: ".$res->output); + } + my $months = {'Jan' => 0, 'Feb' => 1, 'Mar' => 2, 'Apr' => 3, 'May' => 4, 'Jun' => 5, 'Jul' => 6, 'Aug' => 7, 'Sep' => 8, 'Oct' => 9, 'Nov' => 10, 'Dec' => 11}; + my $ts = mktime($sec, $min, $hour, $day, $months->{$mon}, $year-1900); + my $time = strftime("%Y-%m-%d %H:%M:%S", localtime($ts)); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' just expired/, "Output on expire date"); + is( $res->return_code, 2, "Output on expire date" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 0 minutes/, "cert expires in 1 second output"); + is( $res->return_code, 2, "cert expires in 1 second exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 minutes/, "cert expires in 2 minutes output"); + is( $res->return_code, 2, "cert expires in 2 minutes exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 hours/, "cert expires in 2 hours output"); + is( $res->return_code, 2, "cert expires in 2 hours exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_curl -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expired on/, "Certificate expired output"); + is( $res->return_code, 2, "Certificate expired exit code" ); + }; + + $res = NPTest->testCmd( "./check_curl --ssl $host_tls_http -E" ); + like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); + like ( $res->output, '/time_ssl=[\d\.]+/', 'Extended Performance Data SSL Output OK' ); + + $res = NPTest->testCmd( + "./check_curl --ssl -H www.e-paycobalt.com" + ); + cmp_ok( $res->return_code, "==", 0, "Can read https for www.e-paycobalt.com (uses AES certificate)" ); + + + $res = NPTest->testCmd( "./check_curl -H www.mozilla.com -u /firefox -f follow" ); + is( $res->return_code, 0, "Redirection based on location is okay"); + + $res = NPTest->testCmd( "./check_curl -H www.mozilla.com --extended-perfdata" ); + like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); +} -- cgit v0.10-9-g596f From 20fd1ade9192b7615e1250b0d529f165844a5630 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 15:29:45 +0100 Subject: fixed a missing else before curl_easy_setopt CURLOPT_CUSTOMREQUEST diff --git a/plugins/check_curl.c b/plugins/check_curl.c index a7e580d..10ccadf 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -235,7 +235,8 @@ check_http (void) curl_easy_setopt (curl, CURLOPT_POST, 1); else if (!strcmp(http_method, "PUT")) curl_easy_setopt (curl, CURLOPT_PUT, 1); - curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method); + else + curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method); } /* set hostname (virtual hosts) */ -- cgit v0.10-9-g596f From 5d2fa85f1eba76bebd214b7425b08ac91c4d65af Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 15:58:51 +0100 Subject: added help/usage and getopt long struct member for -k/--header option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 10ccadf..b588eed 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -523,6 +523,7 @@ process_arguments (int argc, char **argv) {"private-key", required_argument, 0, 'K'}, {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, + {"header", required_argument, 0, 'k'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"header", required_argument, 0, 'k'}, {"extended-perfdata", no_argument, 0, 'E'}, @@ -835,6 +836,8 @@ print_help (void) printf (" %s\n", _("Username:password on sites with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); + printf (" %s\n", "-k, --header=STRING"); + printf (" %s\n", _("Any other tags to be sent in http header. Use multiple times for additional headers")); printf (" %s\n", "-f, --onredirect="); printf (" %s\n", _("How to handle redirected pages.")); @@ -906,7 +909,7 @@ print_usage (void) printf (" [-w ] [-c ] [-t ] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-s string] [-r \n"); - printf (" [-A string] [-S ] [-C]\n"); + printf (" [-A string] [-k string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); -- cgit v0.10-9-g596f From 4dc982097e39d4067dbd0b2c1a5c66e9538f021d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:01:22 +0100 Subject: reverted double header in longopts diff --git a/plugins/check_curl.c b/plugins/check_curl.c index b588eed..8eac051 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -525,7 +525,6 @@ process_arguments (int argc, char **argv) {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, - {"header", required_argument, 0, 'k'}, {"extended-perfdata", no_argument, 0, 'E'}, {0, 0, 0, 0} }; -- cgit v0.10-9-g596f From ec8de89a4471e8482e284ec9728032ee2dab9228 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:10:20 +0100 Subject: added usage and help for -E/--extended-perfdata diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8eac051..6b33d1c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -837,6 +837,8 @@ print_help (void) printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); printf (" %s\n", "-k, --header=STRING"); printf (" %s\n", _("Any other tags to be sent in http header. Use multiple times for additional headers")); + printf (" %s\n", "-E, --extended-perfdata"); + printf (" %s\n", _("Print additional performance data")); printf (" %s\n", "-f, --onredirect="); printf (" %s\n", _("How to handle redirected pages.")); @@ -905,7 +907,7 @@ print_usage (void) printf ("%s\n", _("Usage:")); printf (" %s -H | -I [-u ] [-p ]\n",progname); printf (" [-J ] [-K ] [--ca-cert ]\n"); - printf (" [-w ] [-c ] [-t ] [-a auth]\n"); + printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-s string] [-r \n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); -- cgit v0.10-9-g596f From 50577bf9b14f31eb6737a0ed3d2e8984a09a4fca Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:30:33 +0100 Subject: added -N/--no-body option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 6b33d1c..96b5a5e 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -130,6 +130,7 @@ char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; X509 *cert = NULL; +int no_body = FALSE; int process_arguments (int, char**); int check_http (void); @@ -324,6 +325,10 @@ check_http (void) */ } + /* no-body */ + if (no_body) + curl_easy_setopt (curl, CURLOPT_NOBODY, 1); + /* do the request */ res = curl_easy_perform(curl); @@ -395,10 +400,8 @@ check_http (void) /* print status line, header, body if verbose */ if (verbose >= 2) { - puts ("--- HEADER ---"); - puts (header_buf.buf); - puts ("--- BODY ---"); - puts (body_buf.buf); + printf ("**** HEADER ****\n%s\n**** CONTENT ****\n%s\n", header_buf.buf, + (no_body ? " [[ skipped ]]" : body_buf.buf)); } /* illegal return codes result in a critical state */ @@ -524,6 +527,7 @@ process_arguments (int argc, char **argv) {"ca-cert", required_argument, 0, CA_CERT_OPTION}, {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, + {"no-body", no_argument, 0, 'N'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"extended-perfdata", no_argument, 0, 'E'}, {0, 0, 0, 0} @@ -533,7 +537,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::E", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -716,6 +720,9 @@ process_arguments (int argc, char **argv) case INVERT_REGEX: invert_regex = 1; break; + case 'N': /* no-body */ + no_body = TRUE; + break; case 'E': /* show extended perfdata */ show_extended_perfdata = TRUE; break; @@ -829,6 +836,9 @@ print_help (void) printf (" %s\n", _("URL to GET or POST (default: /)")); printf (" %s\n", "-j, --method=STRING (for example: HEAD, OPTIONS, TRACE, PUT, DELETE, CONNECT)"); printf (" %s\n", _("Set HTTP method.")); + printf (" %s\n", "-N, --no-body"); + printf (" %s\n", _("Don't wait for document body: stop reading after headers.")); + printf (" %s\n", _("(Note that this still does an HTTP GET or POST, not a HEAD.)")); printf (" %s\n", "-r, --regex, --ereg=STRING"); printf (" %s\n", _("Search page for regex STRING")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); @@ -910,6 +920,7 @@ print_usage (void) printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-s string] [-r \n"); + printf (" [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); printf ("\n"); -- cgit v0.10-9-g596f From 2678d7fabc7bbd4f3d2502ab1d70bf81e9895259 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:37:10 +0100 Subject: added -R/-ereg/-eregi diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 96b5a5e..537268c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -520,6 +520,8 @@ process_arguments (int argc, char **argv) {"authorization", required_argument, 0, 'a'}, {"string", required_argument, 0, 's'}, {"regex", required_argument, 0, 'r'}, + {"ereg", required_argument, 0, 'r'}, + {"eregi", required_argument, 0, 'R'}, {"onredirect", required_argument, 0, 'f'}, {"certificate", required_argument, 0, 'C'}, {"client-cert", required_argument, 0, 'J'}, @@ -537,7 +539,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:r:u:f:C:J:K:S::NE", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -707,6 +709,8 @@ process_arguments (int argc, char **argv) strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); string_expect[MAX_INPUT_BUFFER - 1] = 0; break; + case 'R': /* regex */ + cflags |= REG_ICASE; case 'r': /* regex */ strncpy (regexp, optarg, MAX_RE_SIZE - 1); regexp[MAX_RE_SIZE - 1] = 0; @@ -841,6 +845,8 @@ print_help (void) printf (" %s\n", _("(Note that this still does an HTTP GET or POST, not a HEAD.)")); printf (" %s\n", "-r, --regex, --ereg=STRING"); printf (" %s\n", _("Search page for regex STRING")); + printf (" %s\n", "-R, --eregi=STRING"); + printf (" %s\n", _("Search page for case-insensitive regex STRING")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); printf (" %s\n", _("Username:password on sites with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); @@ -919,7 +925,7 @@ print_usage (void) printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); - printf (" [-s string] [-r \n"); + printf (" [-s string] [-r | -R ]\n"); printf (" [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); -- cgit v0.10-9-g596f From 6e52b870f6d21fbe9b89e4c946eaced8fb5d1f91 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:46:36 +0100 Subject: added help for --invert-regex diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 537268c..0770d90 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -847,6 +847,8 @@ print_help (void) printf (" %s\n", _("Search page for regex STRING")); printf (" %s\n", "-R, --eregi=STRING"); printf (" %s\n", _("Search page for case-insensitive regex STRING")); + printf (" %s\n", "--invert-regex"); + printf (" %s\n", _("Return CRITICAL if found, OK if not\n")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); printf (" %s\n", _("Username:password on sites with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); -- cgit v0.10-9-g596f From a478dfe512e08bbba95fca1b4059a9591bec86ab Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 16:59:44 +0100 Subject: added -m/--pagesize option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 0770d90..49b430c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -100,6 +100,8 @@ thresholds *thlds; char user_agent[DEFAULT_BUFFER_SIZE]; int verbose = 0; int show_extended_perfdata = FALSE; +int min_page_len = 0; +int max_page_len = 0; char *http_method = NULL; CURL *curl; struct curl_slist *header_list = NULL; @@ -189,6 +191,7 @@ int check_http (void) { int result = STATE_OK; + int page_len = 0; /* initialize curl */ if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) @@ -467,6 +470,19 @@ check_http (void) } } + /* make sure the page is of an appropriate size + * TODO: as far I can tell check_http gets the full size of header and + * if -N is not given header+body. Does this make sense? + */ + page_len = header_buf.buflen + body_buf.buflen; + if ((max_page_len > 0) && (page_len > max_page_len)) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spage size %d too large, "), msg, page_len); + result = max_state_alt(STATE_WARNING, result); + } else if ((min_page_len > 0) && (page_len < min_page_len)) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spage size %d too small, "), msg, page_len); + result = max_state_alt(STATE_WARNING, result); + } + /* -w, -c: check warning and critical level */ result = max_state_alt(get_status(total_time, thlds), result); @@ -530,6 +546,7 @@ process_arguments (int argc, char **argv) {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, {"no-body", no_argument, 0, 'N'}, + {"pagesize", required_argument, 0, 'm'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"extended-perfdata", no_argument, 0, 'E'}, {0, 0, 0, 0} @@ -539,7 +556,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::NE", longopts, &option); + c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -724,6 +741,28 @@ process_arguments (int argc, char **argv) case INVERT_REGEX: invert_regex = 1; break; + case 'm': /* min_page_length */ + { + char *tmp; + if (strchr(optarg, ':') != (char *)NULL) { + /* range, so get two values, min:max */ + tmp = strtok(optarg, ":"); + if (tmp == NULL) { + printf("Bad format: try \"-m min:max\"\n"); + exit (STATE_WARNING); + } else + min_page_len = atoi(tmp); + + tmp = strtok(NULL, ":"); + if (tmp == NULL) { + printf("Bad format: try \"-m min:max\"\n"); + exit (STATE_WARNING); + } else + max_page_len = atoi(tmp); + } else + min_page_len = atoi (optarg); + break; + } case 'N': /* no-body */ no_body = TRUE; break; @@ -859,6 +898,8 @@ print_help (void) printf (" %s\n", _("Print additional performance data")); printf (" %s\n", "-f, --onredirect="); printf (" %s\n", _("How to handle redirected pages.")); + printf (" %s\n", "-m, --pagesize=INTEGER<:INTEGER>"); + printf (" %s\n", _("Minimum page size required (bytes) : Maximum page size required (bytes)")); printf (UT_WARN_CRIT); @@ -928,6 +969,7 @@ print_usage (void) printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-s string] [-r | -R ]\n"); + printf (" [-m :] [-N]\n"); printf (" [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); -- cgit v0.10-9-g596f From dee8f760d3c9935a52b1d49b63940f35b3656dc8 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 17 Mar 2017 19:51:57 +0100 Subject: added -4/-6 option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 49b430c..3d368c1 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -133,6 +133,7 @@ char *client_privkey = NULL; char *ca_cert = NULL; X509 *cert = NULL; int no_body = FALSE; +int address_family = AF_UNSPEC; int process_arguments (int, char**); int check_http (void); @@ -332,6 +333,14 @@ check_http (void) if (no_body) curl_easy_setopt (curl, CURLOPT_NOBODY, 1); + /* IPv4 or IPv6 forced DNS resolution */ + if (address_family == AF_UNSPEC) + curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER); + else if (address_family == AF_INET) + curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4); + else if (address_family == AF_INET6) + curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); + /* do the request */ res = curl_easy_perform(curl); @@ -548,6 +557,8 @@ process_arguments (int argc, char **argv) {"no-body", no_argument, 0, 'N'}, {"pagesize", required_argument, 0, 'm'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, + {"use-ipv4", no_argument, 0, '4'}, + {"use-ipv6", no_argument, 0, '6'}, {"extended-perfdata", no_argument, 0, 'E'}, {0, 0, 0, 0} }; @@ -556,7 +567,7 @@ process_arguments (int argc, char **argv) return ERROR; while (1) { - c = getopt_long (argc, argv, "Vvht:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -741,6 +752,16 @@ process_arguments (int argc, char **argv) case INVERT_REGEX: invert_regex = 1; break; + case '4': + address_family = AF_INET; + break; + case '6': +#ifdef USE_IPV6 + address_family = AF_INET6; +#else + usage4 (_("IPv6 support not available")); +#endif + break; case 'm': /* min_page_length */ { char *tmp; @@ -847,6 +868,8 @@ print_help (void) printf (" %s", _("Port number (default: ")); printf ("%d)\n", HTTP_PORT); + printf (UT_IPv46); + #ifdef LIBCURL_FEATURE_SSL printf (" %s\n", "-S, --ssl=VERSION[+]"); printf (" %s\n", _("Connect via SSL. Port defaults to 443. VERSION is optional, and prevents")); @@ -970,7 +993,7 @@ print_usage (void) printf (" [-f ]\n"); printf (" [-s string] [-r | -R ]\n"); printf (" [-m :] [-N]\n"); - printf (" [-N]\n"); + printf (" [-4|-6] [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); printf (" [-v verbose]\n", progname); printf ("\n"); -- cgit v0.10-9-g596f From e9239b556a4748bb06f5f46a2bedbf0114cd099a Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sat, 18 Mar 2017 22:48:35 +0100 Subject: check_curl: make check_curl use the same tests as check_http diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t deleted file mode 100644 index 3c36a26..0000000 --- a/plugins/t/check_curl.t +++ /dev/null @@ -1,200 +0,0 @@ -#! /usr/bin/perl -w -I .. -# -# HyperText Transfer Protocol (HTTP) Test via check_curl -# -# - -use strict; -use Test::More; -use POSIX qw/mktime strftime/; -use NPTest; - -plan tests => 49; - -my $successOutput = '/OK.*HTTP.*second/'; - -my $res; - -my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", - "A host providing the HTTP Service (a web server)", - "localhost" ); - -my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", - "A host providing the HTTPS Service (a tls web server)" ); - -my $host_tls_cert = getTestParameter( "host_tls_cert", "NP_HOST_TLS_CERT", "localhost", - "the common name of the certificate." ); - - -my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", - "The hostname of system not responsive to network requests", - "10.0.0.1" ); - -my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", - "An invalid (not known to DNS) hostname", - "nosuchhost"); - -my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", - "Is this system directly connected to the internet?", - "yes"); - -my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", - "A host providing an index page containing the string 'monitoring'", - "test.monitoring-plugins.org" ); - -my $faketime = -x '/usr/bin/faketime' ? 1 : 0; - - -$res = NPTest->testCmd( - "./check_curl $host_tcp_http -wt 300 -ct 600" - ); -cmp_ok( $res->return_code, '==', 0, "Webserver $host_tcp_http responded" ); -like( $res->output, $successOutput, "Output OK" ); - -$res = NPTest->testCmd( - "./check_curl $host_tcp_http -wt 300 -ct 600 -v -v -v -k 'bob:there' -k 'carl:frown'" - ); -like( $res->output, '/bob:there\r\ncarl:frown\r\n/', "Got headers with multiple -k options" ); - -$res = NPTest->testCmd( - "./check_curl $host_nonresponsive -wt 1 -ct 2 -t 3" - ); -cmp_ok( $res->return_code, '==', 2, "Webserver $host_nonresponsive not responding" ); -cmp_ok( $res->output, 'eq', "CRITICAL - Socket timeout after 3 seconds", "Output OK"); - -$res = NPTest->testCmd( - "./check_curl $hostname_invalid -wt 1 -ct 2" - ); -cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); -# The first part of the message comes from the OS catalogue, so cannot check this. -# On Debian, it is Name or service not known, on Darwin, it is No address associated with nodename -# Is also possible to get a socket timeout if DNS is not responding fast enough -like( $res->output, "/Unable to open TCP socket|Socket timeout after/", "Output OK"); - -# host header checks -$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http"); -like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); - -$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http -p 80"); -like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); - -$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http:8080 -p 80"); -like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); - -$res = NPTest->testCmd("./check_curl -v -H $host_tcp_http:8080 -p 80"); -like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); - -SKIP: { - skip "No internet access", 3 if $internet_access eq "no"; - - $res = NPTest->testCmd("./check_curl -v -H $host_tls_http -S"); - like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); - - $res = NPTest->testCmd("./check_curl -v -H $host_tls_http:8080 -S -p 443"); - like( $res->output, '/^Host: '.$host_tls_http.':8080\s*$/ms', "Host Header OK" ); - - $res = NPTest->testCmd("./check_curl -v -H $host_tls_http:443 -S -p 443"); - like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); -}; - -SKIP: { - skip "No host serving monitoring in index file", 7 unless $host_tcp_http2; - - $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'monitoring'" ); - cmp_ok( $res->return_code, "==", 0, "Got a reference to 'monitoring'"); - - $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'mONiTORing'" ); - cmp_ok( $res->return_code, "==", 2, "Not got 'mONiTORing'"); - like ( $res->output, "/pattern not found/", "Error message says 'pattern not found'"); - - $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -R 'mONiTORing'" ); - cmp_ok( $res->return_code, "==", 0, "But case insensitive doesn't mind 'mONiTORing'"); - - $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'monitoring' --invert-regex" ); - cmp_ok( $res->return_code, "==", 2, "Invert results work when found"); - like ( $res->output, "/pattern found/", "Error message says 'pattern found'"); - - $res = NPTest->testCmd( "./check_curl -H $host_tcp_http2 -r 'mONiTORing' --invert-regex" ); - cmp_ok( $res->return_code, "==", 0, "And also when not found"); -} -SKIP: { - skip "No internet access", 16 if $internet_access eq "no"; - - $res = NPTest->testCmd( - "./check_curl --ssl $host_tls_http" - ); - cmp_ok( $res->return_code, '==', 0, "Can read https for $host_tls_http" ); - - $res = NPTest->testCmd( "./check_curl -C 1 --ssl $host_tls_http" ); - cmp_ok( $res->return_code, '==', 0, "Checking certificate for $host_tls_http"); - like ( $res->output, "/Certificate '$host_tls_cert' will expire on/", "Output OK" ); - my $saved_cert_output = $res->output; - - $res = NPTest->testCmd( "./check_curl -C 8000,1 --ssl $host_tls_http" ); - cmp_ok( $res->return_code, '==', 1, "Checking certificate for $host_tls_http"); - like ( $res->output, qr/WARNING - Certificate '$host_tls_cert' expires in \d+ day/, "Output Warning" ); - - $res = NPTest->testCmd( "./check_curl $host_tls_http -C 1" ); - is( $res->return_code, 0, "Old syntax for cert checking okay" ); - is( $res->output, $saved_cert_output, "Same output as new syntax" ); - - $res = NPTest->testCmd( "./check_curl -H $host_tls_http -C 1" ); - is( $res->return_code, 0, "Updated syntax for cert checking okay" ); - is( $res->output, $saved_cert_output, "Same output as new syntax" ); - - $res = NPTest->testCmd( "./check_curl -C 1 $host_tls_http" ); - cmp_ok( $res->output, 'eq', $saved_cert_output, "--ssl option automatically added"); - - $res = NPTest->testCmd( "./check_curl $host_tls_http -C 1" ); - cmp_ok( $res->output, 'eq', $saved_cert_output, "Old syntax for cert checking still works"); - - # run some certificate checks with faketime - SKIP: { - skip "No faketime binary found", 12 if !$faketime; - $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); - is( $res->return_code, 0, "Catch cert output exit code" ); - my($mon,$day,$hour,$min,$sec,$year) = ($res->output =~ /(\w+)\s+(\d+)\s+(\d+):(\d+):(\d+)\s+(\d+)/); - if(!defined $year) { - die("parsing date failed from: ".$res->output); - } - my $months = {'Jan' => 0, 'Feb' => 1, 'Mar' => 2, 'Apr' => 3, 'May' => 4, 'Jun' => 5, 'Jul' => 6, 'Aug' => 7, 'Sep' => 8, 'Oct' => 9, 'Nov' => 10, 'Dec' => 11}; - my $ts = mktime($sec, $min, $hour, $day, $months->{$mon}, $year-1900); - my $time = strftime("%Y-%m-%d %H:%M:%S", localtime($ts)); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' just expired/, "Output on expire date"); - is( $res->return_code, 2, "Output on expire date" ); - - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 0 minutes/, "cert expires in 1 second output"); - is( $res->return_code, 2, "cert expires in 1 second exit code" ); - - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 minutes/, "cert expires in 2 minutes output"); - is( $res->return_code, 2, "cert expires in 2 minutes exit code" ); - - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 hours/, "cert expires in 2 hours output"); - is( $res->return_code, 2, "cert expires in 2 hours exit code" ); - - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_curl -C 1 $host_tls_http"); - like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expired on/, "Certificate expired output"); - is( $res->return_code, 2, "Certificate expired exit code" ); - }; - - $res = NPTest->testCmd( "./check_curl --ssl $host_tls_http -E" ); - like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); - like ( $res->output, '/time_ssl=[\d\.]+/', 'Extended Performance Data SSL Output OK' ); - - $res = NPTest->testCmd( - "./check_curl --ssl -H www.e-paycobalt.com" - ); - cmp_ok( $res->return_code, "==", 0, "Can read https for www.e-paycobalt.com (uses AES certificate)" ); - - - $res = NPTest->testCmd( "./check_curl -H www.mozilla.com -u /firefox -f follow" ); - is( $res->return_code, 0, "Redirection based on location is okay"); - - $res = NPTest->testCmd( "./check_curl -H www.mozilla.com --extended-perfdata" ); - like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); -} diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t new file mode 120000 index 0000000..a54db96 --- /dev/null +++ b/plugins/t/check_curl.t @@ -0,0 +1 @@ +check_http.t \ No newline at end of file diff --git a/plugins/t/check_http.t b/plugins/t/check_http.t index 8bd484a..281fa36 100644 --- a/plugins/t/check_http.t +++ b/plugins/t/check_http.t @@ -14,6 +14,8 @@ plan tests => 49; my $successOutput = '/OK.*HTTP.*second/'; my $res; +my $plugin = 'check_http'; +$plugin = 'check_curl' if $0 =~ m/check_curl/mx; my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", "A host providing the HTTP Service (a web server)", @@ -46,24 +48,24 @@ my $faketime = -x '/usr/bin/faketime' ? 1 : 0; $res = NPTest->testCmd( - "./check_http $host_tcp_http -wt 300 -ct 600" + "./$plugin $host_tcp_http -wt 300 -ct 600" ); cmp_ok( $res->return_code, '==', 0, "Webserver $host_tcp_http responded" ); like( $res->output, $successOutput, "Output OK" ); $res = NPTest->testCmd( - "./check_http $host_tcp_http -wt 300 -ct 600 -v -v -v -k 'bob:there' -k 'carl:frown'" + "./$plugin $host_tcp_http -wt 300 -ct 600 -v -v -v -k 'bob:there' -k 'carl:frown'" ); like( $res->output, '/bob:there\r\ncarl:frown\r\n/', "Got headers with multiple -k options" ); $res = NPTest->testCmd( - "./check_http $host_nonresponsive -wt 1 -ct 2 -t 3" + "./$plugin $host_nonresponsive -wt 1 -ct 2 -t 3" ); cmp_ok( $res->return_code, '==', 2, "Webserver $host_nonresponsive not responding" ); cmp_ok( $res->output, 'eq', "CRITICAL - Socket timeout after 3 seconds", "Output OK"); $res = NPTest->testCmd( - "./check_http $hostname_invalid -wt 1 -ct 2" + "./$plugin $hostname_invalid -wt 1 -ct 2" ); cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); # The first part of the message comes from the OS catalogue, so cannot check this. @@ -72,86 +74,86 @@ cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); like( $res->output, "/Unable to open TCP socket|Socket timeout after/", "Output OK"); # host header checks -$res = NPTest->testCmd("./check_http -v -H $host_tcp_http"); +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http"); like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); -$res = NPTest->testCmd("./check_http -v -H $host_tcp_http -p 80"); +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); -$res = NPTest->testCmd("./check_http -v -H $host_tcp_http:8080 -p 80"); +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); -$res = NPTest->testCmd("./check_http -v -H $host_tcp_http:8080 -p 80"); +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); SKIP: { skip "No internet access", 3 if $internet_access eq "no"; - $res = NPTest->testCmd("./check_http -v -H $host_tls_http -S"); + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -S"); like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); - $res = NPTest->testCmd("./check_http -v -H $host_tls_http:8080 -S -p 443"); + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:8080 -S -p 443"); like( $res->output, '/^Host: '.$host_tls_http.':8080\s*$/ms', "Host Header OK" ); - $res = NPTest->testCmd("./check_http -v -H $host_tls_http:443 -S -p 443"); + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:443 -S -p 443"); like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); }; SKIP: { skip "No host serving monitoring in index file", 7 unless $host_tcp_http2; - $res = NPTest->testCmd( "./check_http -H $host_tcp_http2 -r 'monitoring'" ); + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'monitoring'" ); cmp_ok( $res->return_code, "==", 0, "Got a reference to 'monitoring'"); - $res = NPTest->testCmd( "./check_http -H $host_tcp_http2 -r 'mONiTORing'" ); + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'mONiTORing'" ); cmp_ok( $res->return_code, "==", 2, "Not got 'mONiTORing'"); like ( $res->output, "/pattern not found/", "Error message says 'pattern not found'"); - $res = NPTest->testCmd( "./check_http -H $host_tcp_http2 -R 'mONiTORing'" ); + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -R 'mONiTORing'" ); cmp_ok( $res->return_code, "==", 0, "But case insensitive doesn't mind 'mONiTORing'"); - $res = NPTest->testCmd( "./check_http -H $host_tcp_http2 -r 'monitoring' --invert-regex" ); + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'monitoring' --invert-regex" ); cmp_ok( $res->return_code, "==", 2, "Invert results work when found"); like ( $res->output, "/pattern found/", "Error message says 'pattern found'"); - $res = NPTest->testCmd( "./check_http -H $host_tcp_http2 -r 'mONiTORing' --invert-regex" ); + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'mONiTORing' --invert-regex" ); cmp_ok( $res->return_code, "==", 0, "And also when not found"); } SKIP: { skip "No internet access", 16 if $internet_access eq "no"; $res = NPTest->testCmd( - "./check_http --ssl $host_tls_http" + "./$plugin --ssl $host_tls_http" ); cmp_ok( $res->return_code, '==', 0, "Can read https for $host_tls_http" ); - $res = NPTest->testCmd( "./check_http -C 1 --ssl $host_tls_http" ); + $res = NPTest->testCmd( "./$plugin -C 1 --ssl $host_tls_http" ); cmp_ok( $res->return_code, '==', 0, "Checking certificate for $host_tls_http"); like ( $res->output, "/Certificate '$host_tls_cert' will expire on/", "Output OK" ); my $saved_cert_output = $res->output; - $res = NPTest->testCmd( "./check_http -C 8000,1 --ssl $host_tls_http" ); + $res = NPTest->testCmd( "./$plugin -C 8000,1 --ssl $host_tls_http" ); cmp_ok( $res->return_code, '==', 1, "Checking certificate for $host_tls_http"); like ( $res->output, qr/WARNING - Certificate '$host_tls_cert' expires in \d+ day/, "Output Warning" ); - $res = NPTest->testCmd( "./check_http $host_tls_http -C 1" ); + $res = NPTest->testCmd( "./$plugin $host_tls_http -C 1" ); is( $res->return_code, 0, "Old syntax for cert checking okay" ); is( $res->output, $saved_cert_output, "Same output as new syntax" ); - $res = NPTest->testCmd( "./check_http -H $host_tls_http -C 1" ); + $res = NPTest->testCmd( "./$plugin -H $host_tls_http -C 1" ); is( $res->return_code, 0, "Updated syntax for cert checking okay" ); is( $res->output, $saved_cert_output, "Same output as new syntax" ); - $res = NPTest->testCmd( "./check_http -C 1 $host_tls_http" ); + $res = NPTest->testCmd( "./$plugin -C 1 $host_tls_http" ); cmp_ok( $res->output, 'eq', $saved_cert_output, "--ssl option automatically added"); - $res = NPTest->testCmd( "./check_http $host_tls_http -C 1" ); + $res = NPTest->testCmd( "./$plugin $host_tls_http -C 1" ); cmp_ok( $res->output, 'eq', $saved_cert_output, "Old syntax for cert checking still works"); # run some certificate checks with faketime SKIP: { skip "No faketime binary found", 12 if !$faketime; - $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./$plugin -C 1 $host_tls_http"); like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); is( $res->return_code, 0, "Catch cert output exit code" ); my($mon,$day,$hour,$min,$sec,$year) = ($res->output =~ /(\w+)\s+(\d+)\s+(\d+):(\d+):(\d+)\s+(\d+)/); @@ -161,40 +163,40 @@ SKIP: { my $months = {'Jan' => 0, 'Feb' => 1, 'Mar' => 2, 'Apr' => 3, 'May' => 4, 'Jun' => 5, 'Jul' => 6, 'Aug' => 7, 'Sep' => 8, 'Oct' => 9, 'Nov' => 10, 'Dec' => 11}; my $ts = mktime($sec, $min, $hour, $day, $months->{$mon}, $year-1900); my $time = strftime("%Y-%m-%d %H:%M:%S", localtime($ts)); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./$plugin -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' just expired/, "Output on expire date"); is( $res->return_code, 2, "Output on expire date" ); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./$plugin -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 0 minutes/, "cert expires in 1 second output"); is( $res->return_code, 2, "cert expires in 1 second exit code" ); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./$plugin -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 minutes/, "cert expires in 2 minutes output"); is( $res->return_code, 2, "cert expires in 2 minutes exit code" ); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./$plugin -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 hours/, "cert expires in 2 hours output"); is( $res->return_code, 2, "cert expires in 2 hours exit code" ); - $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_http -C 1 $host_tls_http"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./$plugin -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expired on/, "Certificate expired output"); is( $res->return_code, 2, "Certificate expired exit code" ); }; - $res = NPTest->testCmd( "./check_http --ssl $host_tls_http -E" ); + $res = NPTest->testCmd( "./$plugin --ssl $host_tls_http -E" ); like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); like ( $res->output, '/time_ssl=[\d\.]+/', 'Extended Performance Data SSL Output OK' ); $res = NPTest->testCmd( - "./check_http --ssl -H www.e-paycobalt.com" + "./$plugin --ssl -H www.e-paycobalt.com" ); cmp_ok( $res->return_code, "==", 0, "Can read https for www.e-paycobalt.com (uses AES certificate)" ); - $res = NPTest->testCmd( "./check_http -H www.mozilla.com -u /firefox -f follow" ); + $res = NPTest->testCmd( "./$plugin -H www.mozilla.com -u /firefox -f follow" ); is( $res->return_code, 0, "Redirection based on location is okay"); - $res = NPTest->testCmd( "./check_http -H www.mozilla.com --extended-perfdata" ); + $res = NPTest->testCmd( "./$plugin -H www.mozilla.com --extended-perfdata" ); like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); } diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t new file mode 120000 index 0000000..a54db96 --- /dev/null +++ b/plugins/tests/check_curl.t @@ -0,0 +1 @@ +check_http.t \ No newline at end of file diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index d6d31de..f5c570a 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -30,13 +30,16 @@ eval { require HTTP::Response; }; +my $plugin = 'check_http'; +$plugin = 'check_curl' if $0 =~ m/check_curl/mx; + if ($@) { plan skip_all => "Missing required module for test: $@"; } else { - if (-x "./check_http") { + if (-x "./$plugin") { plan tests => $common_tests * 2 + $ssl_only_tests + $virtual_port_tests; } else { - plan skip_all => "No check_http compiled"; + plan skip_all => "No $plugin compiled"; } } @@ -185,7 +188,7 @@ if ($ARGV[0] && $ARGV[0] eq "-d") { } my $result; -my $command = "./check_http -H 127.0.0.1"; +my $command = "./$plugin -H 127.0.0.1"; run_common_tests( { command => "$command -p $port_http" } ); SKIP: { -- cgit v0.10-9-g596f From 5f9e8fa1e7908616be267acd7b57700d60276229 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sat, 18 Mar 2017 22:50:18 +0100 Subject: check_curl: adopt output format from check_http diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3d368c1..20ac5b7 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -332,15 +332,15 @@ check_http (void) /* no-body */ if (no_body) curl_easy_setopt (curl, CURLOPT_NOBODY, 1); - + /* IPv4 or IPv6 forced DNS resolution */ if (address_family == AF_UNSPEC) curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER); else if (address_family == AF_INET) curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4); else if (address_family == AF_INET6) - curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); - + curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); + /* do the request */ res = curl_easy_perform(curl); @@ -466,9 +466,9 @@ check_http (void) } else if ((errcode == REG_NOMATCH && invert_regex == 0) || (errcode == 0 && invert_regex == 1)) { if (invert_regex == 0) - snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern not found"), msg); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern not found, "), msg); else - snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern found"), msg); + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spattern found, "), msg); result = STATE_CRITICAL; } else { @@ -495,11 +495,18 @@ check_http (void) /* -w, -c: check warning and critical level */ result = max_state_alt(get_status(total_time, thlds), result); + /* Cut-off trailing characters */ + if(msg[strlen(msg)-2] == ',') + msg[strlen(msg)-2] = '\0'; + else + msg[strlen(msg)-3] = '\0'; + /* TODO: separate _() msg and status code: die (result, "HTTP %s: %s\n", state_text(result), msg); */ - die (result, "HTTP %s HTTP/%d.%d %d %s - %s - %.3g seconds response time|%s\n", + die (result, "HTTP %s: HTTP/%d.%d %d %s%s%s - %d bytes in %.3f second response time |%s\n", state_text(result), status_line.http_major, status_line.http_minor, - status_line.http_code, status_line.msg, msg, - total_time, perfstring); + status_line.http_code, status_line.msg, + strlen(msg) > 0 ? " - " : "", + msg, page_len, total_time, perfstring); /* proper cleanup after die? */ curlhelp_free_statusline(&status_line); -- cgit v0.10-9-g596f From a793540bbb9029069eab3c63fbb82971e2cb9fef Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sat, 18 Mar 2017 22:55:37 +0100 Subject: check_curl: support check_http arguments for backwards compatibility diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 20ac5b7..ccbc6a8 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -573,6 +573,20 @@ process_arguments (int argc, char **argv) if (argc < 2) return ERROR; + /* support check_http compatible arguments */ + for (c = 1; c < argc; c++) { + if (strcmp ("-to", argv[c]) == 0) + strcpy (argv[c], "-t"); + if (strcmp ("-hn", argv[c]) == 0) + strcpy (argv[c], "-H"); + if (strcmp ("-wt", argv[c]) == 0) + strcpy (argv[c], "-w"); + if (strcmp ("-ct", argv[c]) == 0) + strcpy (argv[c], "-c"); + if (strcmp ("-nohtml", argv[c]) == 0) + strcpy (argv[c], "-n"); + } + while (1) { c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) -- cgit v0.10-9-g596f From c6c90a5bfae1e6af90af52756da86c4d839e8bc6 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sat, 18 Mar 2017 23:43:51 +0100 Subject: check_curl: implement -e/--expect diff --git a/plugins/check_curl.c b/plugins/check_curl.c index ccbc6a8..57b6e12 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -49,6 +49,7 @@ const char *email = "devel@monitoring-plugins.org"; #define DEFAULT_BUFFER_SIZE 2048 #define DEFAULT_SERVER_URL "/" +#define HTTP_EXPECT "HTTP/1." enum { HTTP_PORT = 80, HTTPS_PORT = 443, @@ -122,6 +123,8 @@ char url[DEFAULT_BUFFER_SIZE]; char msg[DEFAULT_BUFFER_SIZE]; char perfstring[DEFAULT_BUFFER_SIZE]; char string_expect[MAX_INPUT_BUFFER] = ""; +char server_expect[MAX_INPUT_BUFFER] = HTTP_EXPECT; +int server_expect_yn = 0; char user_auth[MAX_INPUT_BUFFER] = ""; int onredirect = STATE_OK; int use_ssl = FALSE; @@ -188,6 +191,26 @@ CURLcode sslctxfun(CURL *curl, SSL_CTX *sslctx, void *parm) return CURLE_OK; } +/* Checks if the server 'reply' is one of the expected 'statuscodes' */ +static int +expected_statuscode (const char *reply, const char *statuscodes) +{ + char *expected, *code; + int result = 0; + + if ((expected = strdup (statuscodes)) == NULL) + die (STATE_UNKNOWN, _("HTTP UNKNOWN - Memory allocation error\n")); + + for (code = strtok (expected, ","); code != NULL; code = strtok (NULL, ",")) + if (strstr (reply, code) != NULL) { + result = 1; + break; + } + + free (expected); + return result; +} + int check_http (void) { @@ -416,28 +439,47 @@ check_http (void) (no_body ? " [[ skipped ]]" : body_buf.buf)); } - /* illegal return codes result in a critical state */ - if (code >= 600 || code < 100) { - die (STATE_CRITICAL, _("HTTP CRITICAL: Invalid Status (%d, %.40s)\n"), status_line.http_code, status_line.msg); - /* server errors result in a critical state */ - } else if (code >= 500) { - result = STATE_CRITICAL; - /* client errors result in a warning state */ - } else if (code >= 400) { - result = STATE_WARNING; - /* check redirected page if specified */ - } else if (code >= 300) { - if (onredirect == STATE_DEPENDENT) { - code = status_line.http_code; - } - result = max_state_alt (onredirect, result); - /* TODO: make sure the last status line has been - parsed into the status_line structure - */ - /* all other codes are considered ok */ - } else { + /* make sure the status line matches the response we are looking for */ + if (!expected_statuscode(header_buf.buf, server_expect)) { + /* TODO: fix first_line being cut off */ + if (server_port == HTTP_PORT) + snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host: %s\n"), status_line.first_line); + else + snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), server_port, status_line.first_line); + die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); + } + + /* TODO: implement -d header tests */ + if( server_expect_yn ) { + snprintf(msg, DEFAULT_BUFFER_SIZE, _("Status line output matched \"%s\" - "), server_expect); + if (verbose) + printf ("%s\n",msg); result = STATE_OK; } + else { + /* illegal return codes result in a critical state */ + if (code >= 600 || code < 100) { + die (STATE_CRITICAL, _("HTTP CRITICAL: Invalid Status (%d, %.40s)\n"), status_line.http_code, status_line.msg); + /* server errors result in a critical state */ + } else if (code >= 500) { + result = STATE_CRITICAL; + /* client errors result in a warning state */ + } else if (code >= 400) { + result = STATE_WARNING; + /* check redirected page if specified */ + } else if (code >= 300) { + if (onredirect == STATE_DEPENDENT) { + code = status_line.http_code; + } + result = max_state_alt (onredirect, result); + /* TODO: make sure the last status line has been + parsed into the status_line structure + */ + /* all other codes are considered ok */ + } else { + result = STATE_OK; + } + } /* check status codes, set exit status accordingly */ if( status_line.http_code != code ) { @@ -551,6 +593,7 @@ process_arguments (int argc, char **argv) {"port", required_argument, 0, 'p'}, {"authorization", required_argument, 0, 'a'}, {"string", required_argument, 0, 's'}, + {"expect", required_argument, 0, 'e'}, {"regex", required_argument, 0, 'r'}, {"ereg", required_argument, 0, 'r'}, {"eregi", required_argument, 0, 'R'}, @@ -588,7 +631,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -758,6 +801,11 @@ process_arguments (int argc, char **argv) strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); string_expect[MAX_INPUT_BUFFER - 1] = 0; break; + case 'e': /* string or substring */ + strncpy (server_expect, optarg, MAX_INPUT_BUFFER - 1); + server_expect[MAX_INPUT_BUFFER - 1] = 0; + server_expect_yn = 1; + break; case 'R': /* regex */ cflags |= REG_ICASE; case 'r': /* regex */ @@ -917,6 +965,11 @@ print_help (void) printf (" %s\n", _("CA certificate file to verify peer against")); #endif + printf (" %s\n", "-e, --expect=STRING"); + printf (" %s\n", _("Comma-delimited list of strings, at least one of them is expected in")); + printf (" %s", _("the first (status) line of the server response (default: ")); + printf ("%s)\n", HTTP_EXPECT); + printf (" %s\n", _("If specified skips all other status line logic (ex: 3xx, 4xx, 5xx processing)")); printf (" %s\n", "-s, --string=STRING"); printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); @@ -1012,7 +1065,7 @@ print_usage (void) printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); - printf (" [-s string] [-r | -R ]\n"); + printf (" [-e ] [-s string] [-r | -R ]\n"); printf (" [-m :] [-N]\n"); printf (" [-4|-6] [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); -- cgit v0.10-9-g596f From f67f05c450d539015a7bda43ba1dfc7b711d5304 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 19 Mar 2017 09:31:52 +0100 Subject: added -d/--header-string option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 57b6e12..12e0d0a 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -93,6 +93,7 @@ char *server_url = DEFAULT_SERVER_URL; unsigned short server_port = HTTP_PORT; int virtual_port = 0; int host_name_length; +char output_header_search[30] = ""; char output_string_search[30] = ""; char *warning_thresholds = NULL; char *critical_thresholds = NULL; @@ -122,6 +123,7 @@ CURLcode res; char url[DEFAULT_BUFFER_SIZE]; char msg[DEFAULT_BUFFER_SIZE]; char perfstring[DEFAULT_BUFFER_SIZE]; +char header_expect[MAX_INPUT_BUFFER] = ""; char string_expect[MAX_INPUT_BUFFER] = ""; char server_expect[MAX_INPUT_BUFFER] = HTTP_EXPECT; int server_expect_yn = 0; @@ -489,6 +491,18 @@ check_http (void) } /* Page and Header content checks go here */ + + if (strlen (header_expect)) { + if (!strstr (header_buf.buf, header_expect)) { + strncpy(&output_header_search[0],header_expect,sizeof(output_header_search)); + if(output_header_search[sizeof(output_header_search)-1]!='\0') { + bcopy("...",&output_header_search[sizeof(output_header_search)-4],4); + } + snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sheader '%s' not found on '%s://%s:%d%s', "), msg, output_header_search, use_ssl ? "https" : "http", host_name ? host_name : server_address, server_port, server_url); + result = STATE_CRITICAL; + } + } + if (strlen (string_expect)) { if (!strstr (body_buf.buf, string_expect)) { strncpy(&output_string_search[0],string_expect,sizeof(output_string_search)); @@ -592,6 +606,7 @@ process_arguments (int argc, char **argv) {"url", required_argument, 0, 'u'}, {"port", required_argument, 0, 'p'}, {"authorization", required_argument, 0, 'a'}, + {"header-string", required_argument, 0, 'd'}, {"string", required_argument, 0, 's'}, {"expect", required_argument, 0, 'e'}, {"regex", required_argument, 0, 'r'}, @@ -631,7 +646,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -797,6 +812,10 @@ process_arguments (int argc, char **argv) if (verbose >= 2) printf(_("* Following redirects set to %s\n"), state_text(onredirect)); break; + case 'd': /* string or substring */ + strncpy (header_expect, optarg, MAX_INPUT_BUFFER - 1); + header_expect[MAX_INPUT_BUFFER - 1] = 0; + break; case 's': /* string or substring */ strncpy (string_expect, optarg, MAX_INPUT_BUFFER - 1); string_expect[MAX_INPUT_BUFFER - 1] = 0; @@ -970,6 +989,8 @@ print_help (void) printf (" %s", _("the first (status) line of the server response (default: ")); printf ("%s)\n", HTTP_EXPECT); printf (" %s\n", _("If specified skips all other status line logic (ex: 3xx, 4xx, 5xx processing)")); + printf (" %s\n", "-d, --header-string=STRING"); + printf (" %s\n", _("String to expect in the response headers")); printf (" %s\n", "-s, --string=STRING"); printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); @@ -1065,7 +1086,7 @@ print_usage (void) printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); - printf (" [-e ] [-s string] [-r | -R ]\n"); + printf (" [-e ] [-d string] [-s string] [-r | -R ]\n"); printf (" [-m :] [-N]\n"); printf (" [-4|-6] [-N]\n"); printf (" [-A string] [-k string] [-S ] [-C]\n"); -- cgit v0.10-9-g596f From 65753408889c30cfe198fdd7d374d962d6a95f08 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 19 Mar 2017 09:37:31 +0100 Subject: added -l option, fixed some usage/help diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 12e0d0a..1841de5 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -612,6 +612,7 @@ process_arguments (int argc, char **argv) {"regex", required_argument, 0, 'r'}, {"ereg", required_argument, 0, 'r'}, {"eregi", required_argument, 0, 'R'}, + {"linespan", no_argument, 0, 'l'}, {"onredirect", required_argument, 0, 'f'}, {"certificate", required_argument, 0, 'C'}, {"client-cert", required_argument, 0, 'J'}, @@ -825,6 +826,9 @@ process_arguments (int argc, char **argv) server_expect[MAX_INPUT_BUFFER - 1] = 0; server_expect_yn = 1; break; + case 'l': /* linespan */ + cflags &= ~REG_NEWLINE; + break; case 'R': /* regex */ cflags |= REG_ICASE; case 'r': /* regex */ @@ -972,8 +976,9 @@ print_help (void) #else printf (" %s\n", _("Note: SNI is not supported in libcurl before 7.18.1")); #endif - printf (" %s\n", "-C, --certificate"); - printf (" %s\n", _("Check validity of certificate")); + printf (" %s\n", "-C, --certificate=INTEGER[,INTEGER]"); + printf (" %s\n", _("Minimum number of days a certificate has to be valid. Port defaults to 443")); + printf (" %s\n", _("(when this option is used the URL is not checked.)")); printf (" %s\n", "-J, --client-cert=FILE"); printf (" %s\n", _("Name of file that contains the client certificate (PEM format)")); printf (" %s\n", _("to be used in establishing the SSL session")); @@ -1000,6 +1005,8 @@ print_help (void) printf (" %s\n", "-N, --no-body"); printf (" %s\n", _("Don't wait for document body: stop reading after headers.")); printf (" %s\n", _("(Note that this still does an HTTP GET or POST, not a HEAD.)")); + printf (" %s\n", "-l, --linespan"); + printf (" %s\n", _("Allow regex to span newlines (must precede -r or -R)")); printf (" %s\n", "-r, --regex, --ereg=STRING"); printf (" %s\n", _("Search page for regex STRING")); printf (" %s\n", "-R, --eregi=STRING"); @@ -1086,10 +1093,10 @@ print_usage (void) printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); - printf (" [-e ] [-d string] [-s string] [-r | -R ]\n"); + printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-m :] [-N]\n"); printf (" [-4|-6] [-N]\n"); - printf (" [-A string] [-k string] [-S ] [-C]\n"); + printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); printf (" [-v verbose]\n", progname); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); -- cgit v0.10-9-g596f From 3299fbe3c10c4925ca546af86907689619ee4c8a Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 19 Mar 2017 13:30:12 +0100 Subject: fixed handling of SSL/TLS protocol versions diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 1841de5..f6eaba6 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -47,6 +47,8 @@ const char *email = "devel@monitoring-plugins.org"; #include "curl/curl.h" #include "curl/easy.h" +#define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) + #define DEFAULT_BUFFER_SIZE 2048 #define DEFAULT_SERVER_URL "/" #define HTTP_EXPECT "HTTP/1." @@ -769,25 +771,81 @@ process_arguments (int argc, char **argv) #ifdef LIBCURL_FEATURE_SSL enable_ssl: use_ssl = TRUE; - /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. Only set if it's non-zero. This helps when we include multiple - parameters, like -S and -C combinations */ + /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. + * Only set if it's non-zero. This helps when we include multiple + * parameters, like -S and -C combinations */ ssl_version = CURL_SSLVERSION_TLSv1_0; if (c=='S' && optarg != NULL) { - int got_plus = strchr(optarg, '+') != NULL; - - if (!strncmp (optarg, "1.2", 3)) - ssl_version = CURL_SSLVERSION_TLSv1_2; - else if (!strncmp (optarg, "1.1", 3)) - ssl_version = CURL_SSLVERSION_TLSv1_1; - else if (optarg[0] == '1') - ssl_version = CURL_SSLVERSION_TLSv1_0; + int got_plus = 0; + char *plus_ptr = strchr(optarg, '+'); + if (plus_ptr) { + got_plus = 1; + *plus_ptr = '\0'; + } + + if (optarg[0] == '2') + ssl_version = CURL_SSLVERSION_SSLv2; else if (optarg[0] == '3') ssl_version = CURL_SSLVERSION_SSLv3; - else if (optarg[0] == '2') - ssl_version = CURL_SSLVERSION_SSLv2; + else if (!strcmp (optarg, "1") || !strcmp (optarg, "1.0")) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) + ssl_version = CURL_SSLVERSION_TLSv1_0; +#else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); +#endif + else if (!strcmp (optarg, "1.1")) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) + ssl_version = CURL_SSLVERSION_TLSv1_1; +#else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); +#endif + else if (!strcmp (optarg, "1.2")) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) + ssl_version = CURL_SSLVERSION_TLSv1_2; +#else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); +#endif + else if (!strcmp (optarg, "1.3")) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 52, 0) + ssl_version = CURL_SSLVERSION_TLSv1_3; +#else + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2")); +#endif + else usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); } +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) + if (got_plus) { + switch (ssl_version) { + case CURL_SSLVERSION_TLSv1_3: + ssl_version |= CURL_SSLVERSION_MAX_TLSv1_3; + break; + case CURL_SSLVERSION_TLSv1_2: + case CURL_SSLVERSION_TLSv1_1: + case CURL_SSLVERSION_TLSv1_0: + ssl_version |= CURL_SSLVERSION_MAX_DEFAULT; + break; + } + } else { + switch (ssl_version) { + case CURL_SSLVERSION_TLSv1_3: + ssl_version |= CURL_SSLVERSION_MAX_TLSv1_3; + break; + case CURL_SSLVERSION_TLSv1_2: + ssl_version |= CURL_SSLVERSION_MAX_TLSv1_2; + break; + case CURL_SSLVERSION_TLSv1_1: + ssl_version |= CURL_SSLVERSION_MAX_TLSv1_1; + break; + case CURL_SSLVERSION_TLSv1_0: + ssl_version |= CURL_SSLVERSION_MAX_TLSv1_0; + break; + } + } +#endif + if (verbose >= 2) + printf(_("* Set SSL/TLS version to %d\n"), ssl_version); if (server_port == HTTP_PORT) server_port = HTTPS_PORT; #else -- cgit v0.10-9-g596f From f890d271fd2a39121bf1eede5b5fd4eb4cdf6dfd Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 19 Mar 2017 18:19:51 +0100 Subject: added POST support (-P/-T options) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index f6eaba6..4129acc 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -107,6 +107,8 @@ int show_extended_perfdata = FALSE; int min_page_len = 0; int max_page_len = 0; char *http_method = NULL; +char *http_post_data = NULL; +char *http_content_type = NULL; CURL *curl; struct curl_slist *header_list = NULL; curlhelp_curlbuf body_buf; @@ -368,9 +370,21 @@ check_http (void) else if (address_family == AF_INET6) curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); + /* either send http POST data (any data, not only POST)*/ + if (http_post_data) { + if (http_content_type) { + snprintf (http_header, DEFAULT_BUFFER_SIZE, "Content-Type: %s", http_content_type); + header_list = curl_slist_append (header_list, http_header); + } + curl_easy_setopt (curl, CURLOPT_POSTFIELDS, http_post_data); + } + /* do the request */ res = curl_easy_perform(curl); + if (verbose>=2 && http_post_data) + printf ("**** REQUEST CONTENT ****\n%s\n", http_post_data); + /* free header list, we don't need it anymore */ curl_slist_free_all(header_list); @@ -603,6 +617,7 @@ process_arguments (int argc, char **argv) STD_LONG_OPTS, {"ssl", optional_argument, 0, 'S'}, {"sni", no_argument, 0, SNI_OPTION}, + {"post", required_argument, 0, 'P'}, {"method", required_argument, 0, 'j'}, {"IP-address", required_argument, 0, 'I'}, {"url", required_argument, 0, 'u'}, @@ -623,6 +638,7 @@ process_arguments (int argc, char **argv) {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, {"no-body", no_argument, 0, 'N'}, + {"content-type", required_argument, 0, 'T'}, {"pagesize", required_argument, 0, 'm'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, {"use-ipv4", no_argument, 0, '4'}, @@ -649,7 +665,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:j:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -716,6 +732,12 @@ process_arguments (int argc, char **argv) strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); user_auth[MAX_INPUT_BUFFER - 1] = 0; break; + case 'P': /* HTTP POST data in URL encoded format; ignored if settings already */ + if (! http_post_data) + http_post_data = strdup (optarg); + if (! http_method) + http_method = strdup("POST"); + break; case 'j': /* Set HTTP method */ if (http_method) free(http_method); @@ -884,6 +906,9 @@ process_arguments (int argc, char **argv) server_expect[MAX_INPUT_BUFFER - 1] = 0; server_expect_yn = 1; break; + case 'T': /* Content-type */ + http_content_type = strdup (optarg); + break; case 'l': /* linespan */ cflags &= ~REG_NEWLINE; break; @@ -987,7 +1012,7 @@ print_help (void) print_revision (progname, NP_VERSION); printf ("Copyright (c) 1999 Ethan Galstad \n"); - printf ("Copyright (c) 2017 Andreas Baumann \n"); + printf ("Copyright (c) 2017 Andreas Baumann \n"); printf (COPYRIGHT, copyright, email); printf ("%s\n", _("This plugin tests the HTTP service on the specified host. It can test")); @@ -1058,11 +1083,15 @@ print_help (void) printf (" %s\n", _("String to expect in the content")); printf (" %s\n", "-u, --url=PATH"); printf (" %s\n", _("URL to GET or POST (default: /)")); + printf (" %s\n", "-P, --post=STRING"); + printf (" %s\n", _("URL encoded http POST data")); printf (" %s\n", "-j, --method=STRING (for example: HEAD, OPTIONS, TRACE, PUT, DELETE, CONNECT)"); printf (" %s\n", _("Set HTTP method.")); printf (" %s\n", "-N, --no-body"); printf (" %s\n", _("Don't wait for document body: stop reading after headers.")); printf (" %s\n", _("(Note that this still does an HTTP GET or POST, not a HEAD.)")); + printf (" %s\n", "-T, --content-type=STRING"); + printf (" %s\n", _("specify Content-Type header media type when POSTing\n")); printf (" %s\n", "-l, --linespan"); printf (" %s\n", _("Allow regex to span newlines (must precede -r or -R)")); printf (" %s\n", "-r, --regex, --ereg=STRING"); @@ -1152,10 +1181,9 @@ print_usage (void) printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); - printf (" [-m :] [-N]\n"); - printf (" [-4|-6] [-N]\n"); + printf (" [-P string] [-m :] [-4|-6] [-N]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); - printf (" [-v verbose]\n", progname); + printf (" [-T ] [-j method]\n", progname); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); -- cgit v0.10-9-g596f From bbec77c7ecbc6ecaac06d2c8845f83a22546f273 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 14 Apr 2017 20:04:51 +0200 Subject: made check_curl tests copies of check_http tests because they will differ slightly diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t deleted file mode 120000 index a54db96..0000000 --- a/plugins/t/check_curl.t +++ /dev/null @@ -1 +0,0 @@ -check_http.t \ No newline at end of file diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t new file mode 100644 index 0000000..e67fafb --- /dev/null +++ b/plugins/t/check_curl.t @@ -0,0 +1,204 @@ +#! /usr/bin/perl -w -I .. +# +# HyperText Transfer Protocol (HTTP) Test via check_http +# +# + +use strict; +use Test::More; +use POSIX qw/mktime strftime/; +use NPTest; + +plan tests => 49; + +my $successOutput = '/OK.*HTTP.*second/'; + +my $res; +my $plugin = 'check_http'; +$plugin = 'check_curl' if $0 =~ m/check_curl/mx; + +my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", + "A host providing the HTTP Service (a web server)", + "localhost" ); + +my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", + "A host providing the HTTPS Service (a tls web server)" ); + +my $host_tls_cert = getTestParameter( "host_tls_cert", "NP_HOST_TLS_CERT", "localhost", + "the common name of the certificate." ); + + +my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", + "The hostname of system not responsive to network requests", + "10.0.0.1" ); + +my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", + "An invalid (not known to DNS) hostname", + "nosuchhost"); + +my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", + "Is this system directly connected to the internet?", + "yes"); + +my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", + "A host providing an index page containing the string 'monitoring'", + "test.monitoring-plugins.org" ); + +my $faketime = -x '/usr/bin/faketime' ? 1 : 0; + + +$res = NPTest->testCmd( + "./$plugin $host_tcp_http -wt 300 -ct 600" + ); +cmp_ok( $res->return_code, '==', 0, "Webserver $host_tcp_http responded" ); +like( $res->output, $successOutput, "Output OK" ); + +$res = NPTest->testCmd( + "./$plugin $host_tcp_http -wt 300 -ct 600 -v -v -v -k 'bob:there' -k 'carl:frown'" + ); +like( $res->output, '/bob:there\r\ncarl:frown\r\n/', "Got headers with multiple -k options" ); + +$res = NPTest->testCmd( + "./$plugin $host_nonresponsive -wt 1 -ct 2 -t 3" + ); +cmp_ok( $res->return_code, '==', 2, "Webserver $host_nonresponsive not responding" ); +# was CRITICAL only, but both check_curl and check_http print HTTP CRITICAL (puzzle?!) +cmp_ok( $res->output, 'eq', "HTTP CRITICAL - Invalid HTTP response received from host on port 80: cURL returned 28 - Timeout was reached", "Output OK"); + +$res = NPTest->testCmd( + "./$plugin $hostname_invalid -wt 1 -ct 2" + ); +cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); +# The first part of the message comes from the OS catalogue, so cannot check this. +# On Debian, it is Name or service not known, on Darwin, it is No address associated with nodename +# Is also possible to get a socket timeout if DNS is not responding fast enough +# cURL gives us consistent strings from it's own 'lib/strerror.c' +like( $res->output, "/cURL returned 6 - Couldn't resolve host name/", "Output OK"); + +# host header checks +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http"); +like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); + +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); +like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); + +SKIP: { + skip "No internet access", 3 if $internet_access eq "no"; + + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -S"); + like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); + + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:8080 -S -p 443"); + like( $res->output, '/^Host: '.$host_tls_http.':8080\s*$/ms', "Host Header OK" ); + + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:443 -S -p 443"); + like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); +}; + +SKIP: { + skip "No host serving monitoring in index file", 7 unless $host_tcp_http2; + + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'monitoring'" ); + cmp_ok( $res->return_code, "==", 0, "Got a reference to 'monitoring'"); + + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'mONiTORing'" ); + cmp_ok( $res->return_code, "==", 2, "Not got 'mONiTORing'"); + like ( $res->output, "/pattern not found/", "Error message says 'pattern not found'"); + + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -R 'mONiTORing'" ); + cmp_ok( $res->return_code, "==", 0, "But case insensitive doesn't mind 'mONiTORing'"); + + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'monitoring' --invert-regex" ); + cmp_ok( $res->return_code, "==", 2, "Invert results work when found"); + like ( $res->output, "/pattern found/", "Error message says 'pattern found'"); + + $res = NPTest->testCmd( "./$plugin -H $host_tcp_http2 -r 'mONiTORing' --invert-regex" ); + cmp_ok( $res->return_code, "==", 0, "And also when not found"); +} +SKIP: { + skip "No internet access", 16 if $internet_access eq "no"; + + $res = NPTest->testCmd( + "./$plugin --ssl $host_tls_http" + ); + cmp_ok( $res->return_code, '==', 0, "Can read https for $host_tls_http" ); + + $res = NPTest->testCmd( "./$plugin -C 1 --ssl $host_tls_http" ); + cmp_ok( $res->return_code, '==', 0, "Checking certificate for $host_tls_http"); + like ( $res->output, "/Certificate '$host_tls_cert' will expire on/", "Output OK" ); + my $saved_cert_output = $res->output; + + $res = NPTest->testCmd( "./$plugin -C 8000,1 --ssl $host_tls_http" ); + cmp_ok( $res->return_code, '==', 1, "Checking certificate for $host_tls_http"); + like ( $res->output, qr/WARNING - Certificate '$host_tls_cert' expires in \d+ day/, "Output Warning" ); + + $res = NPTest->testCmd( "./$plugin $host_tls_http -C 1" ); + is( $res->return_code, 0, "Old syntax for cert checking okay" ); + is( $res->output, $saved_cert_output, "Same output as new syntax" ); + + $res = NPTest->testCmd( "./$plugin -H $host_tls_http -C 1" ); + is( $res->return_code, 0, "Updated syntax for cert checking okay" ); + is( $res->output, $saved_cert_output, "Same output as new syntax" ); + + $res = NPTest->testCmd( "./$plugin -C 1 $host_tls_http" ); + cmp_ok( $res->output, 'eq', $saved_cert_output, "--ssl option automatically added"); + + $res = NPTest->testCmd( "./$plugin $host_tls_http -C 1" ); + cmp_ok( $res->output, 'eq', $saved_cert_output, "Old syntax for cert checking still works"); + + # run some certificate checks with faketime + SKIP: { + skip "No faketime binary found", 12 if !$faketime; + $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); + is( $res->return_code, 0, "Catch cert output exit code" ); + my($mon,$day,$hour,$min,$sec,$year) = ($res->output =~ /(\w+)\s+(\d+)\s+(\d+):(\d+):(\d+)\s+(\d+)/); + if(!defined $year) { + die("parsing date failed from: ".$res->output); + } + my $months = {'Jan' => 0, 'Feb' => 1, 'Mar' => 2, 'Apr' => 3, 'May' => 4, 'Jun' => 5, 'Jul' => 6, 'Aug' => 7, 'Sep' => 8, 'Oct' => 9, 'Nov' => 10, 'Dec' => 11}; + my $ts = mktime($sec, $min, $hour, $day, $months->{$mon}, $year-1900); + my $time = strftime("%Y-%m-%d %H:%M:%S", localtime($ts)); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' just expired/, "Output on expire date"); + is( $res->return_code, 2, "Output on expire date" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 0 minutes/, "cert expires in 1 second output"); + is( $res->return_code, 2, "cert expires in 1 second exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 minutes/, "cert expires in 2 minutes output"); + is( $res->return_code, 2, "cert expires in 2 minutes exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 hours/, "cert expires in 2 hours output"); + is( $res->return_code, 2, "cert expires in 2 hours exit code" ); + + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./$plugin -C 1 $host_tls_http"); + like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expired on/, "Certificate expired output"); + is( $res->return_code, 2, "Certificate expired exit code" ); + }; + + $res = NPTest->testCmd( "./$plugin --ssl $host_tls_http -E" ); + like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); + like ( $res->output, '/time_ssl=[\d\.]+/', 'Extended Performance Data SSL Output OK' ); + + $res = NPTest->testCmd( + "./$plugin --ssl -H www.e-paycobalt.com" + ); + cmp_ok( $res->return_code, "==", 0, "Can read https for www.e-paycobalt.com (uses AES certificate)" ); + + + $res = NPTest->testCmd( "./$plugin -H www.mozilla.com -u /firefox -f follow" ); + is( $res->return_code, 0, "Redirection based on location is okay"); + + $res = NPTest->testCmd( "./$plugin -H www.mozilla.com --extended-perfdata" ); + like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); +} diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t deleted file mode 120000 index a54db96..0000000 --- a/plugins/tests/check_curl.t +++ /dev/null @@ -1 +0,0 @@ -check_http.t \ No newline at end of file diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t new file mode 100755 index 0000000..dd56706 --- /dev/null +++ b/plugins/tests/check_curl.t @@ -0,0 +1,418 @@ +#! /usr/bin/perl -w -I .. +# +# Test check_http by having an actual HTTP server running +# +# To create the https server certificate: +# openssl req -new -x509 -keyout server-key.pem -out server-cert.pem -days 3650 -nodes +# Country Name (2 letter code) [AU]:UK +# State or Province Name (full name) [Some-State]:Derbyshire +# Locality Name (eg, city) []:Belper +# Organization Name (eg, company) [Internet Widgits Pty Ltd]:Monitoring Plugins +# Organizational Unit Name (eg, section) []: +# Common Name (eg, YOUR name) []:Ton Voon +# Email Address []:tonvoon@mac.com + +use strict; +use Test::More; +use NPTest; +use FindBin qw($Bin); + +$ENV{'LC_TIME'} = "C"; + +my $common_tests = 70; +my $ssl_only_tests = 8; +# Check that all dependent modules are available +eval "use HTTP::Daemon 6.01;"; +plan skip_all => 'HTTP::Daemon >= 6.01 required' if $@; +eval { + require HTTP::Status; + require HTTP::Response; +}; + +my $plugin = 'check_http'; +$plugin = 'check_curl' if $0 =~ m/check_curl/mx; + +if ($@) { + plan skip_all => "Missing required module for test: $@"; +} else { + if (-x "./$plugin") { + plan tests => $common_tests * 2 + $ssl_only_tests; + } else { + plan skip_all => "No $plugin compiled"; + } +} + +my $servers = { http => 0 }; # HTTP::Daemon should always be available +eval { require HTTP::Daemon::SSL }; +if ($@) { + diag "Cannot load HTTP::Daemon::SSL: $@"; +} else { + $servers->{https} = 0; +} + +# set a fixed version, so the header size doesn't vary +$HTTP::Daemon::VERSION = "1.00"; + +my $port_http = 50000 + int(rand(1000)); +my $port_https = $port_http + 1; +my $port_https_expired = $port_http + 2; + +# This array keeps sockets around for implementing timeouts +my @persist; + +# Start up all servers +my @pids; +my $pid = fork(); +if ($pid) { + # Parent + push @pids, $pid; + if (exists $servers->{https}) { + # Fork a normal HTTPS server + $pid = fork(); + if ($pid) { + # Parent + push @pids, $pid; + # Fork an expired cert server + $pid = fork(); + if ($pid) { + push @pids, $pid; + } else { + my $d = HTTP::Daemon::SSL->new( + LocalPort => $port_https_expired, + LocalAddr => "127.0.0.1", + SSL_cert_file => "$Bin/certs/expired-cert.pem", + SSL_key_file => "$Bin/certs/expired-key.pem", + ) || die; + print "Please contact https expired at: url, ">\n"; + run_server( $d ); + exit; + } + } else { + my $d = HTTP::Daemon::SSL->new( + LocalPort => $port_https, + LocalAddr => "127.0.0.1", + SSL_cert_file => "$Bin/certs/server-cert.pem", + SSL_key_file => "$Bin/certs/server-key.pem", + ) || die; + print "Please contact https at: url, ">\n"; + run_server( $d ); + exit; + } + } + # give our webservers some time to startup + sleep(1); +} else { + # Child + #print "child\n"; + my $d = HTTP::Daemon->new( + LocalPort => $port_http, + LocalAddr => "127.0.0.1", + ) || die; + print "Please contact http at: url, ">\n"; + run_server( $d ); + exit; +} + +# Run the same server on http and https +sub run_server { + my $d = shift; + MAINLOOP: while (my $c = $d->accept ) { + while (my $r = $c->get_request) { + if ($r->method eq "GET" and $r->url->path =~ m^/statuscode/(\d+)^) { + $c->send_basic_header($1); + $c->send_crlf; + } elsif ($r->method eq "GET" and $r->url->path =~ m^/file/(.*)^) { + $c->send_basic_header; + $c->send_crlf; + $c->send_file_response("$Bin/var/$1"); + } elsif ($r->method eq "GET" and $r->url->path eq "/slow") { + $c->send_basic_header; + $c->send_crlf; + sleep 1; + $c->send_response("slow"); + } elsif ($r->url->path eq "/method") { + if ($r->method eq "DELETE") { + $c->send_error(HTTP::Status->RC_METHOD_NOT_ALLOWED); + } elsif ($r->method eq "foo") { + $c->send_error(HTTP::Status->RC_NOT_IMPLEMENTED); + } else { + $c->send_status_line(200, $r->method); + } + } elsif ($r->url->path eq "/postdata") { + $c->send_basic_header; + $c->send_crlf; + $c->send_response($r->method.":".$r->content); + } elsif ($r->url->path eq "/redirect") { + $c->send_redirect( "/redirect2" ); + } elsif ($r->url->path eq "/redir_external") { + $c->send_redirect(($d->isa('HTTP::Daemon::SSL') ? "https" : "http") . "://169.254.169.254/redirect2" ); + } elsif ($r->url->path eq "/redirect2") { + $c->send_basic_header; + $c->send_crlf; + $c->send_response(HTTP::Response->new( 200, 'OK', undef, 'redirected' )); + } elsif ($r->url->path eq "/redir_timeout") { + $c->send_redirect( "/timeout" ); + } elsif ($r->url->path eq "/timeout") { + # Keep $c from being destroyed, but prevent severe leaks + unshift @persist, $c; + delete($persist[1000]); + next MAINLOOP; + } elsif ($r->url->path eq "/header_check") { + $c->send_basic_header; + $c->send_header('foo'); + $c->send_crlf; + } else { + $c->send_error(HTTP::Status->RC_FORBIDDEN); + } + $c->close; + } + } +} + +END { + foreach my $pid (@pids) { + if ($pid) { print "Killing $pid\n"; kill "INT", $pid } + } +}; + +if ($ARGV[0] && $ARGV[0] eq "-d") { + while (1) { + sleep 100; + } +} + +my $result; +my $command = "./$plugin -H 127.0.0.1"; + +run_common_tests( { command => "$command -p $port_http" } ); +SKIP: { + skip "HTTP::Daemon::SSL not installed", $common_tests + $ssl_only_tests if ! exists $servers->{https}; + run_common_tests( { command => "$command -p $port_https", ssl => 1 } ); + + $result = NPTest->testCmd( "$command -p $port_https -S -C 14" ); + is( $result->return_code, 0, "$command -p $port_https -S -C 14" ); + is( $result->output, 'OK - Certificate \'Ton Voon\' will expire on Sun Mar 3 21:41:28 2019 +0000.', "output ok" ); + + $result = NPTest->testCmd( "$command -p $port_https -S -C 14000" ); + is( $result->return_code, 1, "$command -p $port_https -S -C 14000" ); + like( $result->output, '/WARNING - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + + # Expired cert tests + $result = NPTest->testCmd( "$command -p $port_https -S -C 13960,14000" ); + is( $result->return_code, 2, "$command -p $port_https -S -C 13960,14000" ); + like( $result->output, '/CRITICAL - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + + $result = NPTest->testCmd( "$command -p $port_https_expired -S -C 7" ); + is( $result->return_code, 2, "$command -p $port_https_expired -S -C 7" ); + is( $result->output, + 'CRITICAL - Certificate \'Ton Voon\' expired on Thu Mar 5 00:13:16 2009 +0000.', + "output ok" ); + +} + +sub run_common_tests { + my ($opts) = @_; + my $command = $opts->{command}; + if ($opts->{ssl}) { + $command .= " --ssl"; + } + + $result = NPTest->testCmd( "$command -u /file/root" ); + is( $result->return_code, 0, "/file/root"); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - 274 bytes in [\d\.]+ second/', "Output correct" ); + + $result = NPTest->testCmd( "$command -u /file/root -s Root" ); + is( $result->return_code, 0, "/file/root search for string"); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - 274 bytes in [\d\.]+ second/', "Output correct" ); + + $result = NPTest->testCmd( "$command -u /file/root -s NonRoot" ); + is( $result->return_code, 2, "Missing string check"); + like( $result->output, qr%^HTTP CRITICAL: HTTP/1\.1 200 OK - string 'NonRoot' not found on 'https?://127\.0\.0\.1:\d+/file/root'%, "Shows search string and location"); + + $result = NPTest->testCmd( "$command -u /file/root -s NonRootWithOver30charsAndMoreFunThanAWetFish" ); + is( $result->return_code, 2, "Missing string check"); + like( $result->output, qr%HTTP CRITICAL: HTTP/1\.1 200 OK - string 'NonRootWithOver30charsAndM...' not found on 'https?://127\.0\.0\.1:\d+/file/root'%, "Shows search string and location"); + + $result = NPTest->testCmd( "$command -u /header_check -d foo" ); + is( $result->return_code, 0, "header_check search for string"); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - 96 bytes in [\d\.]+ second/', "Output correct" ); + + $result = NPTest->testCmd( "$command -u /header_check -d bar" ); + is( $result->return_code, 2, "Missing header string check"); + like( $result->output, qr%^HTTP CRITICAL: HTTP/1\.1 200 OK - header 'bar' not found on 'https?://127\.0\.0\.1:\d+/header_check'%, "Shows search string and location"); + + my $cmd; + $cmd = "$command -u /slow"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, "$cmd"); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + $result->output =~ /in ([\d\.]+) second/; + cmp_ok( $1, ">", 1, "Time is > 1 second" ); + + $cmd = "$command -u /statuscode/200"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/200 -e 200"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: Status line output matched "200" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/201"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 201 Created - \d+ bytes in [\d\.]+ second /', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/201 -e 201"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: Status line output matched "201" - \d+ bytes in [\d\.]+ second /', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/201 -e 200"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 2, $cmd); + like( $result->output, '/^HTTP CRITICAL - Invalid HTTP response received from host on port \d+: HTTP/1.1 201 Created/', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/200 -e 200,201,202"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/201 -e 200,201,202"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /statuscode/203 -e 200,201,202"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 2, $cmd); + like( $result->output, '/^HTTP CRITICAL - Invalid HTTP response received from host on port (\d+): HTTP/1.1 203 Non-Authoritative Information/', "Output correct: ".$result->output ); + + $cmd = "$command -j HEAD -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 HEAD - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -j POST -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 POST - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -j GET -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 GET - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 GET - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -P foo -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 POST - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -j DELETE -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 1, $cmd); + like( $result->output, '/^HTTP WARNING: HTTP/1.1 405 Method Not Allowed/', "Output correct: ".$result->output ); + + $cmd = "$command -j foo -u /method"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 2, $cmd); + like( $result->output, '/^HTTP CRITICAL: HTTP/1.1 501 Not Implemented/', "Output correct: ".$result->output ); + + $cmd = "$command -P stufftoinclude -u /postdata -s POST:stufftoinclude"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -j PUT -P stufftoinclude -u /postdata -s PUT:stufftoinclude"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # To confirm that the free doesn't segfault + $cmd = "$command -P stufftoinclude -j PUT -u /postdata -s PUT:stufftoinclude"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /redirect"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 301 Moved Permanently - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -f follow -u /redirect"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -u /redirect -k 'follow: me'"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 301 Moved Permanently - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -f follow -u /redirect -k 'follow: me'"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -f sticky -u /redirect -k 'follow: me'"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + $cmd = "$command -f stickyport -u /redirect -k 'follow: me'"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # These tests may block + print "ALRM\n"; + + # stickyport - on full urlS port is set back to 80 otherwise + $cmd = "$command -f stickyport -u /redir_external -t 5 -s redirected"; + eval { + local $SIG{ALRM} = sub { die "alarm\n" }; + alarm(2); + $result = NPTest->testCmd( $cmd ); + alarm(0); }; + isnt( $@, "alarm\n", $cmd ); + is( $result->return_code, 0, $cmd ); + + # Let's hope there won't be any web server on :80 returning "redirected"! + $cmd = "$command -f sticky -u /redir_external -t 5 -s redirected"; + eval { + local $SIG{ALRM} = sub { die "alarm\n" }; + alarm(2); + $result = NPTest->testCmd( $cmd ); + alarm(0); }; + isnt( $@, "alarm\n", $cmd ); + isnt( $result->return_code, 0, $cmd ); + + # Test an external address - timeout + SKIP: { + skip "This doesn't seems to work all the time", 1 unless ($ENV{HTTP_EXTERNAL}); + $cmd = "$command -f follow -u /redir_external -t 5"; + eval { + $result = NPTest->testCmd( $cmd, 2 ); + }; + like( $@, "/timeout in command: $cmd/", $cmd ); + } + + $cmd = "$command -u /timeout -t 5"; + eval { + $result = NPTest->testCmd( $cmd, 2 ); + }; + like( $@, "/timeout in command: $cmd/", $cmd ); + + $cmd = "$command -f follow -u /redir_timeout -t 2"; + eval { + $result = NPTest->testCmd( $cmd, 5 ); + }; + is( $@, "", $cmd ); + +} -- cgit v0.10-9-g596f From 9960c56e5e09caf33a8010e52cb32a931fb3ab2a Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 14 Apr 2017 21:10:40 +0200 Subject: added -M age option for document age, using picohttpparser from h2o (maybe handy later to make a more robust header condition checker?) diff --git a/.gitignore b/.gitignore index 91de2c7..b238aef 100644 --- a/.gitignore +++ b/.gitignore @@ -202,6 +202,7 @@ NP-VERSION-FILE /plugins/negate /plugins/stamp-h* /plugins/urlize +/plugins/libpicohttpparser.a # /plugins/t/ /plugins/t/*.tmp diff --git a/plugins/Makefile.am b/plugins/Makefile.am index ffd8baf..ff745c3 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -44,11 +44,13 @@ EXTRA_DIST = t tests PLUGINHDRS = common.h -noinst_LIBRARIES = libnpcommon.a +noinst_LIBRARIES = libnpcommon.a libpicohttpparser.a libnpcommon_a_SOURCES = utils.c netutils.c sslutils.c runcmd.c \ popen.c utils.h netutils.h popen.h common.h runcmd.c runcmd.h +libpicohttpparser_a_SOURCES = picohttpparser.c + BASEOBJS = libnpcommon.a ../lib/libmonitoringplug.a ../gl/libgnu.a NETOBJS = $(BASEOBJS) $(EXTRA_NETOBLS) NETLIBS = $(NETOBJS) $(SOCKETLIBS) @@ -71,7 +73,7 @@ check_apt_LDADD = $(BASEOBJS) check_cluster_LDADD = $(BASEOBJS) check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) -check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) +check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) libpicohttpparser.a check_dbi_LDADD = $(NETLIBS) $(DBILIBS) check_dig_LDADD = $(NETLIBS) check_disk_LDADD = $(BASEOBJS) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4129acc..7576b2d 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -37,6 +37,8 @@ const char *progname = "check_curl"; const char *copyright = "2006-2017"; const char *email = "devel@monitoring-plugins.org"; +#include + #include "common.h" #include "utils.h" @@ -47,6 +49,8 @@ const char *email = "devel@monitoring-plugins.org"; #include "curl/curl.h" #include "curl/easy.h" +#include "picohttpparser.h" + #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) #define DEFAULT_BUFFER_SIZE 2048 @@ -73,7 +77,7 @@ typedef struct { int http_code; /* HTTP return code as in RFC 2145 */ int http_subcode; /* Microsoft IIS extension, HTTP subcodes, see * http://support.microsoft.com/kb/318380/en-us */ - char *msg; /* the human readable message */ + const char *msg; /* the human readable message */ char *first_line; /* a copy of the first line */ } curlhelp_statusline; @@ -142,6 +146,7 @@ char *client_privkey = NULL; char *ca_cert = NULL; X509 *cert = NULL; int no_body = FALSE; +int maximum_age = -1; int address_family = AF_UNSPEC; int process_arguments (int, char**); @@ -156,6 +161,9 @@ void curlhelp_freebuffer (curlhelp_curlbuf*); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); char *perfd_time_ssl (double microsec); +char *get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header); +static time_t parse_time_string (const char *string); +int check_document_dates (const curlhelp_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); void remove_newlines (char *); void test_file (char *); @@ -391,7 +399,7 @@ check_http (void) /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { remove_newlines (errbuf); - snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s\n"), + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s"), server_port, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } @@ -506,6 +514,10 @@ check_http (void) status_line.http_code, status_line.msg, code); } + if (maximum_age >= 0) { + result = max_state_alt(check_document_dates(&header_buf, &msg), result); + } + /* Page and Header content checks go here */ if (strlen (header_expect)) { @@ -638,6 +650,7 @@ process_arguments (int argc, char **argv) {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, {"no-body", no_argument, 0, 'N'}, + {"max-age", required_argument, 0, 'M'}, {"content-type", required_argument, 0, 'T'}, {"pagesize", required_argument, 0, 'm'}, {"invert-regex", no_argument, NULL, INVERT_REGEX}, @@ -665,7 +678,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -962,6 +975,26 @@ process_arguments (int argc, char **argv) case 'N': /* no-body */ no_body = TRUE; break; + case 'M': /* max-age */ + { + int L = strlen(optarg); + if (L && optarg[L-1] == 'm') + maximum_age = atoi (optarg) * 60; + else if (L && optarg[L-1] == 'h') + maximum_age = atoi (optarg) * 60 * 60; + else if (L && optarg[L-1] == 'd') + maximum_age = atoi (optarg) * 60 * 60 * 24; + else if (L && (optarg[L-1] == 's' || + isdigit (optarg[L-1]))) + maximum_age = atoi (optarg); + else { + fprintf (stderr, "unparsable max-age: %s\n", optarg); + exit (STATE_WARNING); + } + if (verbose >= 2) + printf ("* Maximal age of document set to %d seconds\n", maximum_age); + } + break; case 'E': /* show extended perfdata */ show_extended_perfdata = TRUE; break; @@ -1090,6 +1123,9 @@ print_help (void) printf (" %s\n", "-N, --no-body"); printf (" %s\n", _("Don't wait for document body: stop reading after headers.")); printf (" %s\n", _("(Note that this still does an HTTP GET or POST, not a HEAD.)")); + printf (" %s\n", "-M, --max-age=SECONDS"); + printf (" %s\n", _("Warn if document is more than SECONDS old. the number can also be of")); + printf (" %s\n", _("the form \"10m\" for minutes, \"10h\" for hours, or \"10d\" for days.")); printf (" %s\n", "-T, --content-type=STRING"); printf (" %s\n", _("specify Content-Type header media type when POSTing\n")); printf (" %s\n", "-l, --linespan"); @@ -1181,7 +1217,7 @@ print_usage (void) printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); - printf (" [-P string] [-m :] [-4|-6] [-N]\n"); + printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); printf (" [-T ] [-j method]\n", progname); printf ("\n"); @@ -1351,7 +1387,164 @@ remove_newlines (char *s) *p = ' '; } -char *perfd_time_ssl (double elapsed_time_ssl) +char * +perfd_time_ssl (double elapsed_time_ssl) { return fperfdata ("time_ssl", elapsed_time_ssl, "s", FALSE, 0, FALSE, 0, FALSE, 0, FALSE, 0); } + +char * +get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header) +{ + for( int i = 0; i < nof_headers; i++ ) { + if( strncasecmp( header, headers[i].name, max( headers[i].name_len, 4 ) ) == 0 ) { + return strndup( headers[i].value, headers[i].value_len ); + } + } + return NULL; +} + +static time_t +parse_time_string (const char *string) +{ + struct tm tm; + time_t t; + memset (&tm, 0, sizeof(tm)); + + /* Like this: Tue, 25 Dec 2001 02:59:03 GMT */ + + if (isupper (string[0]) && /* Tue */ + islower (string[1]) && + islower (string[2]) && + ',' == string[3] && + ' ' == string[4] && + (isdigit(string[5]) || string[5] == ' ') && /* 25 */ + isdigit (string[6]) && + ' ' == string[7] && + isupper (string[8]) && /* Dec */ + islower (string[9]) && + islower (string[10]) && + ' ' == string[11] && + isdigit (string[12]) && /* 2001 */ + isdigit (string[13]) && + isdigit (string[14]) && + isdigit (string[15]) && + ' ' == string[16] && + isdigit (string[17]) && /* 02: */ + isdigit (string[18]) && + ':' == string[19] && + isdigit (string[20]) && /* 59: */ + isdigit (string[21]) && + ':' == string[22] && + isdigit (string[23]) && /* 03 */ + isdigit (string[24]) && + ' ' == string[25] && + 'G' == string[26] && /* GMT */ + 'M' == string[27] && /* GMT */ + 'T' == string[28]) { + + tm.tm_sec = 10 * (string[23]-'0') + (string[24]-'0'); + tm.tm_min = 10 * (string[20]-'0') + (string[21]-'0'); + tm.tm_hour = 10 * (string[17]-'0') + (string[18]-'0'); + tm.tm_mday = 10 * (string[5] == ' ' ? 0 : string[5]-'0') + (string[6]-'0'); + tm.tm_mon = (!strncmp (string+8, "Jan", 3) ? 0 : + !strncmp (string+8, "Feb", 3) ? 1 : + !strncmp (string+8, "Mar", 3) ? 2 : + !strncmp (string+8, "Apr", 3) ? 3 : + !strncmp (string+8, "May", 3) ? 4 : + !strncmp (string+8, "Jun", 3) ? 5 : + !strncmp (string+8, "Jul", 3) ? 6 : + !strncmp (string+8, "Aug", 3) ? 7 : + !strncmp (string+8, "Sep", 3) ? 8 : + !strncmp (string+8, "Oct", 3) ? 9 : + !strncmp (string+8, "Nov", 3) ? 10 : + !strncmp (string+8, "Dec", 3) ? 11 : + -1); + tm.tm_year = ((1000 * (string[12]-'0') + + 100 * (string[13]-'0') + + 10 * (string[14]-'0') + + (string[15]-'0')) + - 1900); + + tm.tm_isdst = 0; /* GMT is never in DST, right? */ + + if (tm.tm_mon < 0 || tm.tm_mday < 1 || tm.tm_mday > 31) + return 0; + + /* + This is actually wrong: we need to subtract the local timezone + offset from GMT from this value. But, that's ok in this usage, + because we only comparing these two GMT dates against each other, + so it doesn't matter what time zone we parse them in. + */ + + t = mktime (&tm); + if (t == (time_t) -1) t = 0; + + if (verbose) { + const char *s = string; + while (*s && *s != '\r' && *s != '\n') + fputc (*s++, stdout); + printf (" ==> %lu\n", (unsigned long) t); + } + + return t; + + } else { + return 0; + } +} + +int +check_document_dates (const curlhelp_curlbuf *header_buf, char (*msg)[DEFAULT_BUFFER_SIZE]) +{ + char *server_date = NULL; + char *document_date = NULL; + int date_result = STATE_OK; + curlhelp_statusline status_line; + struct phr_header headers[255]; + size_t nof_headers = 255; + size_t msglen; + + int res = phr_parse_response (header_buf->buf, header_buf->buflen, + &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, + headers, &nof_headers, 0); + + server_date = get_header_value (headers, nof_headers, "date"); + document_date = get_header_value (headers, nof_headers, "last-modified"); + + if (!server_date || !*server_date) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sServer date unknown, "), *msg); + date_result = max_state_alt(STATE_UNKNOWN, date_result); + } else if (!document_date || !*document_date) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sDocument modification date unknown, "), *msg); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } else { + time_t srv_data = parse_time_string (server_date); + time_t doc_data = parse_time_string (document_date); + if (srv_data <= 0) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sServer date \"%100s\" unparsable, "), *msg, server_date); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } else if (doc_data <= 0) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sDocument date \"%100s\" unparsable, "), *msg, document_date); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } else if (doc_data > srv_data + 30) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sDocument is %d seconds in the future, "), *msg, (int)doc_data - (int)srv_data); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } else if (doc_data < srv_data - maximum_age) { + int n = (srv_data - doc_data); + if (n > (60 * 60 * 24 * 2)) { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sLast modified %.1f days ago, "), *msg, ((float) n) / (60 * 60 * 24)); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } else { + snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sLast modified %d:%02d:%02d ago, "), *msg, n / (60 * 60), (n / 60) % 60, n % 60); + date_result = max_state_alt(STATE_CRITICAL, date_result); + } + } + } + + if (server_date) free (server_date); + if (document_date) free (document_date); + + return date_result; +} diff --git a/plugins/picohttpparser.c b/plugins/picohttpparser.c new file mode 100644 index 0000000..6a2d872 --- /dev/null +++ b/plugins/picohttpparser.c @@ -0,0 +1,620 @@ +/* + * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, + * Shigeo Mitsunari + * + * The software is licensed under either the MIT License (below) or the Perl + * license. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include +#include +#include +#ifdef __SSE4_2__ +#ifdef _MSC_VER +#include +#else +#include +#endif +#endif +#include "picohttpparser.h" + +/* $Id: a707070d11d499609f99d09f97535642cec910a8 $ */ + +#if __GNUC__ >= 3 +#define likely(x) __builtin_expect(!!(x), 1) +#define unlikely(x) __builtin_expect(!!(x), 0) +#else +#define likely(x) (x) +#define unlikely(x) (x) +#endif + +#ifdef _MSC_VER +#define ALIGNED(n) _declspec(align(n)) +#else +#define ALIGNED(n) __attribute__((aligned(n))) +#endif + +#define IS_PRINTABLE_ASCII(c) ((unsigned char)(c)-040u < 0137u) + +#define CHECK_EOF() \ + if (buf == buf_end) { \ + *ret = -2; \ + return NULL; \ + } + +#define EXPECT_CHAR_NO_CHECK(ch) \ + if (*buf++ != ch) { \ + *ret = -1; \ + return NULL; \ + } + +#define EXPECT_CHAR(ch) \ + CHECK_EOF(); \ + EXPECT_CHAR_NO_CHECK(ch); + +#define ADVANCE_TOKEN(tok, toklen) \ + do { \ + const char *tok_start = buf; \ + static const char ALIGNED(16) ranges2[] = "\000\040\177\177"; \ + int found2; \ + buf = findchar_fast(buf, buf_end, ranges2, sizeof(ranges2) - 1, &found2); \ + if (!found2) { \ + CHECK_EOF(); \ + } \ + while (1) { \ + if (*buf == ' ') { \ + break; \ + } else if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { \ + if ((unsigned char)*buf < '\040' || *buf == '\177') { \ + *ret = -1; \ + return NULL; \ + } \ + } \ + ++buf; \ + CHECK_EOF(); \ + } \ + tok = tok_start; \ + toklen = buf - tok_start; \ + } while (0) + +static const char *token_char_map = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\1\0\1\1\1\1\1\0\0\1\1\0\1\1\0\1\1\1\1\1\1\1\1\1\1\0\0\0\0\0\0" + "\0\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\0\0\1\1" + "\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\1\0\1\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; + +static const char *findchar_fast(const char *buf, const char *buf_end, const char *ranges, size_t ranges_size, int *found) +{ + *found = 0; +#if __SSE4_2__ + if (likely(buf_end - buf >= 16)) { + __m128i ranges16 = _mm_loadu_si128((const __m128i *)ranges); + + size_t left = (buf_end - buf) & ~15; + do { + __m128i b16 = _mm_loadu_si128((const __m128i *)buf); + int r = _mm_cmpestri(ranges16, ranges_size, b16, 16, _SIDD_LEAST_SIGNIFICANT | _SIDD_CMP_RANGES | _SIDD_UBYTE_OPS); + if (unlikely(r != 16)) { + buf += r; + *found = 1; + break; + } + buf += 16; + left -= 16; + } while (likely(left != 0)); + } +#else + /* suppress unused parameter warning */ + (void)buf_end; + (void)ranges; + (void)ranges_size; +#endif + return buf; +} + +static const char *get_token_to_eol(const char *buf, const char *buf_end, const char **token, size_t *token_len, int *ret) +{ + const char *token_start = buf; + +#ifdef __SSE4_2__ + static const char ranges1[] = "\0\010" + /* allow HT */ + "\012\037" + /* allow SP and up to but not including DEL */ + "\177\177" + /* allow chars w. MSB set */ + ; + int found; + buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); + if (found) + goto FOUND_CTL; +#else + /* find non-printable char within the next 8 bytes, this is the hottest code; manually inlined */ + while (likely(buf_end - buf >= 8)) { +#define DOIT() \ + do { \ + if (unlikely(!IS_PRINTABLE_ASCII(*buf))) \ + goto NonPrintable; \ + ++buf; \ + } while (0) + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); +#undef DOIT + continue; + NonPrintable: + if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { + goto FOUND_CTL; + } + ++buf; + } +#endif + for (;; ++buf) { + CHECK_EOF(); + if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { + if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { + goto FOUND_CTL; + } + } + } +FOUND_CTL: + if (likely(*buf == '\015')) { + ++buf; + EXPECT_CHAR('\012'); + *token_len = buf - 2 - token_start; + } else if (*buf == '\012') { + *token_len = buf - token_start; + ++buf; + } else { + *ret = -1; + return NULL; + } + *token = token_start; + + return buf; +} + +static const char *is_complete(const char *buf, const char *buf_end, size_t last_len, int *ret) +{ + int ret_cnt = 0; + buf = last_len < 3 ? buf : buf + last_len - 3; + + while (1) { + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + CHECK_EOF(); + EXPECT_CHAR('\012'); + ++ret_cnt; + } else if (*buf == '\012') { + ++buf; + ++ret_cnt; + } else { + ++buf; + ret_cnt = 0; + } + if (ret_cnt == 2) { + return buf; + } + } + + *ret = -2; + return NULL; +} + +#define PARSE_INT(valp_, mul_) \ + if (*buf < '0' || '9' < *buf) { \ + buf++; \ + *ret = -1; \ + return NULL; \ + } \ + *(valp_) = (mul_) * (*buf++ - '0'); + +#define PARSE_INT_3(valp_) \ + do { \ + int res_ = 0; \ + PARSE_INT(&res_, 100) \ + *valp_ = res_; \ + PARSE_INT(&res_, 10) \ + *valp_ += res_; \ + PARSE_INT(&res_, 1) \ + *valp_ += res_; \ + } while (0) + +/* returned pointer is always within [buf, buf_end), or null */ +static const char *parse_http_version(const char *buf, const char *buf_end, int *minor_version, int *ret) +{ + /* we want at least [HTTP/1.] to try to parse */ + if (buf_end - buf < 9) { + *ret = -2; + return NULL; + } + EXPECT_CHAR_NO_CHECK('H'); + EXPECT_CHAR_NO_CHECK('T'); + EXPECT_CHAR_NO_CHECK('T'); + EXPECT_CHAR_NO_CHECK('P'); + EXPECT_CHAR_NO_CHECK('/'); + EXPECT_CHAR_NO_CHECK('1'); + EXPECT_CHAR_NO_CHECK('.'); + PARSE_INT(minor_version, 1); + return buf; +} + +static const char *parse_headers(const char *buf, const char *buf_end, struct phr_header *headers, size_t *num_headers, + size_t max_headers, int *ret) +{ + for (;; ++*num_headers) { + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + break; + } else if (*buf == '\012') { + ++buf; + break; + } + if (*num_headers == max_headers) { + *ret = -1; + return NULL; + } + if (!(*num_headers != 0 && (*buf == ' ' || *buf == '\t'))) { + /* parsing name, but do not discard SP before colon, see + * http://www.mozilla.org/security/announce/2006/mfsa2006-33.html */ + headers[*num_headers].name = buf; + static const char ALIGNED(16) ranges1[] = "\x00 " /* control chars and up to SP */ + "\"\"" /* 0x22 */ + "()" /* 0x28,0x29 */ + ",," /* 0x2c */ + "//" /* 0x2f */ + ":@" /* 0x3a-0x40 */ + "[]" /* 0x5b-0x5d */ + "{\377"; /* 0x7b-0xff */ + int found; + buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); + if (!found) { + CHECK_EOF(); + } + while (1) { + if (*buf == ':') { + break; + } else if (!token_char_map[(unsigned char)*buf]) { + *ret = -1; + return NULL; + } + ++buf; + CHECK_EOF(); + } + if ((headers[*num_headers].name_len = buf - headers[*num_headers].name) == 0) { + *ret = -1; + return NULL; + } + ++buf; + for (;; ++buf) { + CHECK_EOF(); + if (!(*buf == ' ' || *buf == '\t')) { + break; + } + } + } else { + headers[*num_headers].name = NULL; + headers[*num_headers].name_len = 0; + } + if ((buf = get_token_to_eol(buf, buf_end, &headers[*num_headers].value, &headers[*num_headers].value_len, ret)) == NULL) { + return NULL; + } + } + return buf; +} + +static const char *parse_request(const char *buf, const char *buf_end, const char **method, size_t *method_len, const char **path, + size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, + size_t max_headers, int *ret) +{ + /* skip first empty line (some clients add CRLF after POST content) */ + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + } else if (*buf == '\012') { + ++buf; + } + + /* parse request line */ + ADVANCE_TOKEN(*method, *method_len); + ++buf; + ADVANCE_TOKEN(*path, *path_len); + ++buf; + if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { + return NULL; + } + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + } else if (*buf == '\012') { + ++buf; + } else { + *ret = -1; + return NULL; + } + + return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); +} + +int phr_parse_request(const char *buf_start, size_t len, const char **method, size_t *method_len, const char **path, + size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf_start + len; + size_t max_headers = *num_headers; + int r; + + *method = NULL; + *method_len = 0; + *path = NULL; + *path_len = 0; + *minor_version = -1; + *num_headers = 0; + + /* if last_len != 0, check if the request is complete (a fast countermeasure + againt slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_request(buf, buf_end, method, method_len, path, path_len, minor_version, headers, num_headers, max_headers, + &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +static const char *parse_response(const char *buf, const char *buf_end, int *minor_version, int *status, const char **msg, + size_t *msg_len, struct phr_header *headers, size_t *num_headers, size_t max_headers, int *ret) +{ + /* parse "HTTP/1.x" */ + if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { + return NULL; + } + /* skip space */ + if (*buf++ != ' ') { + *ret = -1; + return NULL; + } + /* parse status code, we want at least [:digit:][:digit:][:digit:] to try to parse */ + if (buf_end - buf < 4) { + *ret = -2; + return NULL; + } + PARSE_INT_3(status); + + /* skip space */ + if (*buf++ != ' ') { + *ret = -1; + return NULL; + } + /* get message */ + if ((buf = get_token_to_eol(buf, buf_end, msg, msg_len, ret)) == NULL) { + return NULL; + } + + return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); +} + +int phr_parse_response(const char *buf_start, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, + struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf + len; + size_t max_headers = *num_headers; + int r; + + *minor_version = -1; + *status = 0; + *msg = NULL; + *msg_len = 0; + *num_headers = 0; + + /* if last_len != 0, check if the response is complete (a fast countermeasure + against slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_response(buf, buf_end, minor_version, status, msg, msg_len, headers, num_headers, max_headers, &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +int phr_parse_headers(const char *buf_start, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf + len; + size_t max_headers = *num_headers; + int r; + + *num_headers = 0; + + /* if last_len != 0, check if the response is complete (a fast countermeasure + against slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_headers(buf, buf_end, headers, num_headers, max_headers, &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +enum { + CHUNKED_IN_CHUNK_SIZE, + CHUNKED_IN_CHUNK_EXT, + CHUNKED_IN_CHUNK_DATA, + CHUNKED_IN_CHUNK_CRLF, + CHUNKED_IN_TRAILERS_LINE_HEAD, + CHUNKED_IN_TRAILERS_LINE_MIDDLE +}; + +static int decode_hex(int ch) +{ + if ('0' <= ch && ch <= '9') { + return ch - '0'; + } else if ('A' <= ch && ch <= 'F') { + return ch - 'A' + 0xa; + } else if ('a' <= ch && ch <= 'f') { + return ch - 'a' + 0xa; + } else { + return -1; + } +} + +ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *_bufsz) +{ + size_t dst = 0, src = 0, bufsz = *_bufsz; + ssize_t ret = -2; /* incomplete */ + + while (1) { + switch (decoder->_state) { + case CHUNKED_IN_CHUNK_SIZE: + for (;; ++src) { + int v; + if (src == bufsz) + goto Exit; + if ((v = decode_hex(buf[src])) == -1) { + if (decoder->_hex_count == 0) { + ret = -1; + goto Exit; + } + break; + } + if (decoder->_hex_count == sizeof(size_t) * 2) { + ret = -1; + goto Exit; + } + decoder->bytes_left_in_chunk = decoder->bytes_left_in_chunk * 16 + v; + ++decoder->_hex_count; + } + decoder->_hex_count = 0; + decoder->_state = CHUNKED_IN_CHUNK_EXT; + /* fallthru */ + case CHUNKED_IN_CHUNK_EXT: + /* RFC 7230 A.2 "Line folding in chunk extensions is disallowed" */ + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] == '\012') + break; + } + ++src; + if (decoder->bytes_left_in_chunk == 0) { + if (decoder->consume_trailer) { + decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; + break; + } else { + goto Complete; + } + } + decoder->_state = CHUNKED_IN_CHUNK_DATA; + /* fallthru */ + case CHUNKED_IN_CHUNK_DATA: { + size_t avail = bufsz - src; + if (avail < decoder->bytes_left_in_chunk) { + if (dst != src) + memmove(buf + dst, buf + src, avail); + src += avail; + dst += avail; + decoder->bytes_left_in_chunk -= avail; + goto Exit; + } + if (dst != src) + memmove(buf + dst, buf + src, decoder->bytes_left_in_chunk); + src += decoder->bytes_left_in_chunk; + dst += decoder->bytes_left_in_chunk; + decoder->bytes_left_in_chunk = 0; + decoder->_state = CHUNKED_IN_CHUNK_CRLF; + } + /* fallthru */ + case CHUNKED_IN_CHUNK_CRLF: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] != '\015') + break; + } + if (buf[src] != '\012') { + ret = -1; + goto Exit; + } + ++src; + decoder->_state = CHUNKED_IN_CHUNK_SIZE; + break; + case CHUNKED_IN_TRAILERS_LINE_HEAD: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] != '\015') + break; + } + if (buf[src++] == '\012') + goto Complete; + decoder->_state = CHUNKED_IN_TRAILERS_LINE_MIDDLE; + /* fallthru */ + case CHUNKED_IN_TRAILERS_LINE_MIDDLE: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] == '\012') + break; + } + ++src; + decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; + break; + default: + assert(!"decoder is corrupt"); + } + } + +Complete: + ret = bufsz - src; +Exit: + if (dst != src) + memmove(buf + dst, buf + src, bufsz - src); + *_bufsz = dst; + return ret; +} + +int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder) +{ + return decoder->_state == CHUNKED_IN_CHUNK_DATA; +} + +#undef CHECK_EOF +#undef EXPECT_CHAR +#undef ADVANCE_TOKEN diff --git a/plugins/picohttpparser.h b/plugins/picohttpparser.h new file mode 100644 index 0000000..a8fad71 --- /dev/null +++ b/plugins/picohttpparser.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, + * Shigeo Mitsunari + * + * The software is licensed under either the MIT License (below) or the Perl + * license. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef picohttpparser_h +#define picohttpparser_h + +#include + +#ifdef _MSC_VER +#define ssize_t intptr_t +#endif + +/* $Id: 67fd3ee74103ada60258d8a16e868f483abcca87 $ */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* contains name and value of a header (name == NULL if is a continuing line + * of a multiline header */ +struct phr_header { + const char *name; + size_t name_len; + const char *value; + size_t value_len; +}; + +/* returns number of bytes consumed if successful, -2 if request is partial, + * -1 if failed */ +int phr_parse_request(const char *buf, size_t len, const char **method, size_t *method_len, const char **path, size_t *path_len, + int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* ditto */ +int phr_parse_response(const char *_buf, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, + struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* ditto */ +int phr_parse_headers(const char *buf, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* should be zero-filled before start */ +struct phr_chunked_decoder { + size_t bytes_left_in_chunk; /* number of bytes left in current chunk */ + char consume_trailer; /* if trailing headers should be consumed */ + char _hex_count; + char _state; +}; + +/* the function rewrites the buffer given as (buf, bufsz) removing the chunked- + * encoding headers. When the function returns without an error, bufsz is + * updated to the length of the decoded data available. Applications should + * repeatedly call the function while it returns -2 (incomplete) every time + * supplying newly arrived data. If the end of the chunked-encoded data is + * found, the function returns a non-negative number indicating the number of + * octets left undecoded at the tail of the supplied buffer. Returns -1 on + * error. + */ +ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *bufsz); + +/* returns if the chunked decoder is in middle of chunked data */ +int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder); + +#ifdef __cplusplus +} +#endif + +#endif -- cgit v0.10-9-g596f From d5d71dde61eb2e251c1f9555eef97cb0bcdf55cd Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 15 Apr 2017 14:36:24 +0200 Subject: fixed non-C99-ism in get_header_value diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 7576b2d..08327e6 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1396,7 +1396,8 @@ perfd_time_ssl (double elapsed_time_ssl) char * get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header) { - for( int i = 0; i < nof_headers; i++ ) { + int i; + for( i = 0; i < nof_headers; i++ ) { if( strncasecmp( header, headers[i].name, max( headers[i].name_len, 4 ) ) == 0 ) { return strndup( headers[i].value, headers[i].value_len ); } -- cgit v0.10-9-g596f From f4a49a8b34ab3826d4e11ebc31e3709c0536176f Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 15 Apr 2017 15:28:50 +0200 Subject: added -L option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 08327e6..dac4132 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -136,6 +136,7 @@ char string_expect[MAX_INPUT_BUFFER] = ""; char server_expect[MAX_INPUT_BUFFER] = HTTP_EXPECT; int server_expect_yn = 0; char user_auth[MAX_INPUT_BUFFER] = ""; +int display_html = FALSE; int onredirect = STATE_OK; int use_ssl = FALSE; int use_sni = TRUE; @@ -188,6 +189,11 @@ main (int argc, char **argv) if (process_arguments (argc, argv) == ERROR) usage4 (_("Could not parse arguments")); + if (display_html == TRUE) + printf ("", + use_ssl ? "https" : "http", host_name ? host_name : server_address, + server_port, server_url); + result = check_http (); return result; } @@ -627,6 +633,7 @@ process_arguments (int argc, char **argv) int option = 0; static struct option longopts[] = { STD_LONG_OPTS, + {"link", no_argument, 0, 'L'}, {"ssl", optional_argument, 0, 'S'}, {"sni", no_argument, 0, SNI_OPTION}, {"post", required_argument, 0, 'P'}, @@ -678,7 +685,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:S::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:LS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -762,6 +769,9 @@ process_arguments (int argc, char **argv) case 'k': /* Additional headers */ header_list = curl_slist_append(header_list, optarg); break; + case 'L': /* show html link */ + display_html = TRUE; + break; case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL if ((temp=strchr(optarg,','))!=NULL) { @@ -1144,6 +1154,8 @@ print_help (void) printf (" %s\n", _("Any other tags to be sent in http header. Use multiple times for additional headers")); printf (" %s\n", "-E, --extended-perfdata"); printf (" %s\n", _("Print additional performance data")); + printf (" %s\n", "-L, --link"); + printf (" %s\n", _("Wrap output in HTML link (obsoleted by urlize)")); printf (" %s\n", "-f, --onredirect="); printf (" %s\n", _("How to handle redirected pages.")); printf (" %s\n", "-m, --pagesize=INTEGER<:INTEGER>"); @@ -1214,7 +1226,7 @@ print_usage (void) printf ("%s\n", _("Usage:")); printf (" %s -H | -I [-u ] [-p ]\n",progname); printf (" [-J ] [-K ] [--ca-cert ]\n"); - printf (" [-w ] [-c ] [-t ] [-E] [-a auth]\n"); + printf (" [-w ] [-c ] [-t ] [-L] [-E] [-a auth]\n"); printf (" [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); -- cgit v0.10-9-g596f From 3c681a2ec5b8329e53bf5cdba9e60e3fb4a0aaee Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 15 Apr 2017 18:27:50 +0200 Subject: added -n and more display_html stuff diff --git a/plugins/check_curl.c b/plugins/check_curl.c index dac4132..103937c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -592,11 +592,13 @@ check_http (void) msg[strlen(msg)-3] = '\0'; /* TODO: separate _() msg and status code: die (result, "HTTP %s: %s\n", state_text(result), msg); */ - die (result, "HTTP %s: HTTP/%d.%d %d %s%s%s - %d bytes in %.3f second response time |%s\n", + die (result, "HTTP %s: HTTP/%d.%d %d %s%s%s - %d bytes in %.3f second response time %s|%s\n", state_text(result), status_line.http_major, status_line.http_minor, status_line.http_code, status_line.msg, strlen(msg) > 0 ? " - " : "", - msg, page_len, total_time, perfstring); + msg, page_len, total_time, + (display_html ? "" : ""), + perfstring); /* proper cleanup after die? */ curlhelp_free_statusline(&status_line); @@ -634,6 +636,7 @@ process_arguments (int argc, char **argv) static struct option longopts[] = { STD_LONG_OPTS, {"link", no_argument, 0, 'L'}, + {"nohtml", no_argument, 0, 'n'}, {"ssl", optional_argument, 0, 'S'}, {"sni", no_argument, 0, SNI_OPTION}, {"post", required_argument, 0, 'P'}, @@ -685,7 +688,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:LS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:nLS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -772,6 +775,9 @@ process_arguments (int argc, char **argv) case 'L': /* show html link */ display_html = TRUE; break; + case 'n': /* do not show html link */ + display_html = FALSE; + break; case 'C': /* Check SSL cert validity */ #ifdef LIBCURL_FEATURE_SSL if ((temp=strchr(optarg,','))!=NULL) { -- cgit v0.10-9-g596f From 54c8f76c72ce73a9e0e23dbce26d09aa15e002ad Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 16 Apr 2017 16:53:32 +0200 Subject: fixed test outputs for status line checks handling empty data in POST and PUT handling data upload (from -P ) also in PUT diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 103937c..5d3df9e 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -67,7 +67,14 @@ typedef struct { char *buf; size_t buflen; size_t bufsize; -} curlhelp_curlbuf; +} curlhelp_write_curlbuf; + +/* for buffering the data sent in PUT */ +typedef struct { + char *buf; + size_t buflen; + off_t pos; +} curlhelp_read_curlbuf; /* for parsing the HTTP status line */ typedef struct { @@ -115,9 +122,10 @@ char *http_post_data = NULL; char *http_content_type = NULL; CURL *curl; struct curl_slist *header_list = NULL; -curlhelp_curlbuf body_buf; -curlhelp_curlbuf header_buf; +curlhelp_write_curlbuf body_buf; +curlhelp_write_curlbuf header_buf; curlhelp_statusline status_line; +curlhelp_read_curlbuf put_buf; char http_header[DEFAULT_BUFFER_SIZE]; long code; long socket_timeout = DEFAULT_SOCKET_TIMEOUT; @@ -155,16 +163,19 @@ int check_http (void); void print_help (void); void print_usage (void); void print_curl_version (void); -int curlhelp_initbuffer (curlhelp_curlbuf*); -int curlhelp_buffer_callback (void*, size_t , size_t , void*); -void curlhelp_freebuffer (curlhelp_curlbuf*); +int curlhelp_initwritebuffer (curlhelp_write_curlbuf*); +int curlhelp_buffer_write_callback (void*, size_t , size_t , void*); +void curlhelp_freewritebuffer (curlhelp_write_curlbuf*); +int curlhelp_initreadbuffer (curlhelp_read_curlbuf *, const char *, size_t); +int curlhelp_buffer_read_callback (void *, size_t , size_t , void *); +void curlhelp_freereadbuffer (curlhelp_read_curlbuf *); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); char *perfd_time_ssl (double microsec); char *get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header); static time_t parse_time_string (const char *string); -int check_document_dates (const curlhelp_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); +int check_document_dates (const curlhelp_write_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); void remove_newlines (char *); void test_file (char *); @@ -251,15 +262,15 @@ check_http (void) curl_easy_setopt(curl, CURLOPT_STDERR, stdout); /* initialize buffer for body of the answer */ - if (curlhelp_initbuffer(&body_buf) < 0) + if (curlhelp_initwritebuffer(&body_buf) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); - curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, (curl_write_callback)curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback); curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); /* initialize buffer for header of the answer */ - if (curlhelp_initbuffer( &header_buf ) < 0) + if (curlhelp_initwritebuffer( &header_buf ) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); - curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, (curl_write_callback)curlhelp_buffer_callback); + curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback); curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); /* set the error buffer */ @@ -282,7 +293,11 @@ check_http (void) if (!strcmp(http_method, "POST")) curl_easy_setopt (curl, CURLOPT_POST, 1); else if (!strcmp(http_method, "PUT")) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 12, 1) + curl_easy_setopt (curl, CURLOPT_UPLOAD, 1); +#else curl_easy_setopt (curl, CURLOPT_PUT, 1); +#endif else curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method); } @@ -385,12 +400,25 @@ check_http (void) curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); /* either send http POST data (any data, not only POST)*/ - if (http_post_data) { + if (!strcmp(http_method, "POST") ||!strcmp(http_method, "PUT")) { + /* set content of payload for POST and PUT */ if (http_content_type) { snprintf (http_header, DEFAULT_BUFFER_SIZE, "Content-Type: %s", http_content_type); header_list = curl_slist_append (header_list, http_header); } - curl_easy_setopt (curl, CURLOPT_POSTFIELDS, http_post_data); + /* NULL indicates "HTTP Continue" in libcurl, provide an empty string + * in case of no POST/PUT data */ + if (!http_post_data) + http_post_data = ""; + if (!strcmp(http_method, "POST")) { + /* POST method, set payload with CURLOPT_POSTFIELDS */ + curl_easy_setopt (curl, CURLOPT_POSTFIELDS, http_post_data); + } else if (!strcmp(http_method, "PUT")) { + curl_easy_setopt (curl, CURLOPT_READFUNCTION, (curl_read_callback)curlhelp_buffer_read_callback); + curlhelp_initreadbuffer (&put_buf, http_post_data, strlen (http_post_data)); + curl_easy_setopt (curl, CURLOPT_READDATA, (void *)&put_buf); + curl_easy_setopt (curl, CURLOPT_INFILESIZE, (curl_off_t)strlen (http_post_data)); + } } /* do the request */ @@ -472,13 +500,13 @@ check_http (void) } /* make sure the status line matches the response we are looking for */ - if (!expected_statuscode(header_buf.buf, server_expect)) { + if (!expected_statuscode(status_line.first_line, server_expect)) { /* TODO: fix first_line being cut off */ if (server_port == HTTP_PORT) snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host: %s\n"), status_line.first_line); else snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), server_port, status_line.first_line); - die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); + die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); } /* TODO: implement -d header tests */ @@ -604,8 +632,11 @@ check_http (void) curlhelp_free_statusline(&status_line); curl_easy_cleanup (curl); curl_global_cleanup (); - curlhelp_freebuffer(&body_buf); - curlhelp_freebuffer(&header_buf); + curlhelp_freewritebuffer(&body_buf); + curlhelp_freewritebuffer(&header_buf); + if (!strcmp (http_method, "PUT")) { + curlhelp_freereadbuffer (&put_buf); + } return result; } @@ -1250,7 +1281,7 @@ print_curl_version (void) } int -curlhelp_initbuffer (curlhelp_curlbuf *buf) +curlhelp_initwritebuffer (curlhelp_write_curlbuf *buf) { buf->bufsize = DEFAULT_BUFFER_SIZE; buf->buflen = 0; @@ -1260,9 +1291,9 @@ curlhelp_initbuffer (curlhelp_curlbuf *buf) } int -curlhelp_buffer_callback (void *buffer, size_t size, size_t nmemb, void *stream) +curlhelp_buffer_write_callback (void *buffer, size_t size, size_t nmemb, void *stream) { - curlhelp_curlbuf *buf = (curlhelp_curlbuf *)stream; + curlhelp_write_curlbuf *buf = (curlhelp_write_curlbuf *)stream; while (buf->bufsize < buf->buflen + size * nmemb + 1) { buf->bufsize *= buf->bufsize * 2; @@ -1277,8 +1308,39 @@ curlhelp_buffer_callback (void *buffer, size_t size, size_t nmemb, void *stream) return (int)(size * nmemb); } +int +curlhelp_buffer_read_callback (void *buffer, size_t size, size_t nmemb, void *stream) +{ + curlhelp_read_curlbuf *buf = (curlhelp_read_curlbuf *)stream; + + size_t n = min (nmemb * size, buf->buflen - buf->pos); + + memcpy (buffer, buf->buf + buf->pos, n); + buf->pos += n; + + return (int)n; +} + void -curlhelp_freebuffer (curlhelp_curlbuf *buf) +curlhelp_freewritebuffer (curlhelp_write_curlbuf *buf) +{ + free (buf->buf); + buf->buf = NULL; +} + +int +curlhelp_initreadbuffer (curlhelp_read_curlbuf *buf, const char *data, size_t datalen) +{ + buf->buflen = datalen; + buf->buf = (char *)malloc ((size_t)buf->buflen); + if (buf->buf == NULL) return -1; + memcpy (buf->buf, data, datalen); + buf->pos = 0; + return 0; +} + +void +curlhelp_freereadbuffer (curlhelp_read_curlbuf *buf) { free (buf->buf); buf->buf = NULL; @@ -1328,6 +1390,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) size_t first_line_len; char *pp; const char *start; + char *first_line_buf; /* find last start of a new header */ start = strrstr2 (buf, "\r\nHTTP"); @@ -1344,47 +1407,49 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) if (status_line->first_line == NULL) return -1; memcpy (status_line->first_line, buf, first_line_len); status_line->first_line[first_line_len] = '\0'; + first_line_buf = strdup( status_line->first_line ); /* protocol and version: "HTTP/x.x" SP */ - p = strtok(status_line->first_line, "/"); - if( p == NULL ) { free( status_line->first_line ); return -1; } - if( strcmp( p, "HTTP" ) != 0 ) { free( status_line->first_line ); return -1; } + p = strtok(first_line_buf, "/"); + if( p == NULL ) { free( first_line_buf ); return -1; } + if( strcmp( p, "HTTP" ) != 0 ) { free( first_line_buf ); return -1; } p = strtok( NULL, "." ); - if( p == NULL ) { free( status_line->first_line ); return -1; } + if( p == NULL ) { free( first_line_buf ); return -1; } status_line->http_major = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + if( *pp != '\0' ) { free( first_line_buf ); return -1; } p = strtok( NULL, " " ); - if( p == NULL ) { free( status_line->first_line ); return -1; } + if( p == NULL ) { free( first_line_buf ); return -1; } status_line->http_minor = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + if( *pp != '\0' ) { free( first_line_buf ); return -1; } /* status code: "404" or "404.1", then SP */ p = strtok( NULL, " ." ); - if( p == NULL ) { free( status_line->first_line ); return -1; } + if( p == NULL ) { free( first_line_buf ); return -1; } if( strchr( p, '.' ) != NULL ) { char *ppp; ppp = strtok( p, "." ); status_line->http_code = (int)strtol( ppp, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + if( *pp != '\0' ) { free( first_line_buf ); return -1; } ppp = strtok( NULL, "" ); status_line->http_subcode = (int)strtol( ppp, &pp, 10 ); - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + if( *pp != '\0' ) { free( first_line_buf ); return -1; } } else { status_line->http_code = (int)strtol( p, &pp, 10 ); status_line->http_subcode = -1; - if( *pp != '\0' ) { free( status_line->first_line ); return -1; } + if( *pp != '\0' ) { free( first_line_buf ); return -1; } } /* Human readable message: "Not Found" CRLF */ + free( first_line_buf ); p = strtok( NULL, "" ); if( p == NULL ) { free( status_line->first_line ); return -1; } - status_line->msg = p; + status_line->msg = status_line->first_line + ( p - first_line_buf ); return 0; } @@ -1515,7 +1580,7 @@ parse_time_string (const char *string) } int -check_document_dates (const curlhelp_curlbuf *header_buf, char (*msg)[DEFAULT_BUFFER_SIZE]) +check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFAULT_BUFFER_SIZE]) { char *server_date = NULL; char *document_date = NULL; diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index dd56706..702edb8 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -257,7 +257,7 @@ sub run_common_tests { $cmd = "$command -u /statuscode/200 -e 200"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); - like( $result->output, '/^HTTP OK: Status line output matched "200" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - Status line output matched "200" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); $cmd = "$command -u /statuscode/201"; $result = NPTest->testCmd( $cmd ); @@ -267,7 +267,7 @@ sub run_common_tests { $cmd = "$command -u /statuscode/201 -e 201"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); - like( $result->output, '/^HTTP OK: Status line output matched "201" - \d+ bytes in [\d\.]+ second /', "Output correct: ".$result->output ); + like( $result->output, '/^HTTP OK: HTTP/1.1 201 Created - Status line output matched "201" - \d+ bytes in [\d\.]+ second /', "Output correct: ".$result->output ); $cmd = "$command -u /statuscode/201 -e 200"; $result = NPTest->testCmd( $cmd ); @@ -277,12 +277,12 @@ sub run_common_tests { $cmd = "$command -u /statuscode/200 -e 200,201,202"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); - like( $result->output, '/^HTTP OK: Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); $cmd = "$command -u /statuscode/201 -e 200,201,202"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); - like( $result->output, '/^HTTP OK: Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + like( $result->output, '/^HTTP OK: HTTP/1.1 201 Created - Status line output matched "200,201,202" - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); $cmd = "$command -u /statuscode/203 -e 200,201,202"; $result = NPTest->testCmd( $cmd ); -- cgit v0.10-9-g596f From 304e04a3849e00aa78327eb694e79487a3c8eaac Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Tue, 18 Apr 2017 21:14:54 +0200 Subject: some cleanup and added error handling around curl_easy_getinfo/curl_easy_setopt diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 5d3df9e..f8c8832 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -159,6 +159,7 @@ int maximum_age = -1; int address_family = AF_UNSPEC; int process_arguments (int, char**); +void handle_curl_option_return_code (CURLcode res, const char* option); int check_http (void); void print_help (void); void print_usage (void); @@ -242,6 +243,16 @@ expected_statuscode (const char *reply, const char *statuscodes) return result; } +void +handle_curl_option_return_code (CURLcode res, const char* option) +{ + if (res != CURLE_OK) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Error while setting cURL option '%s': cURL returned %d - %s"), + res, curl_easy_strerror(res)); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } +} + int check_http (void) { @@ -256,50 +267,50 @@ check_http (void) die (STATE_UNKNOWN, "HTTP UNKNOWN - curl_easy_init failed\n"); if (verbose >= 1) - curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_VERBOSE, TRUE), "CURLOPT_VERBOSE"); /* print everything on stdout like check_http would do */ - curl_easy_setopt(curl, CURLOPT_STDERR, stdout); + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_STDERR, stdout), "CURLOPT_STDERR"); /* initialize buffer for body of the answer */ if (curlhelp_initwritebuffer(&body_buf) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); - curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback); - curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_WRITEFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback), "CURLOPT_WRITEFUNCTION"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_WRITEDATA, (void *)&body_buf), "CURLOPT_WRITEDATA"); /* initialize buffer for header of the answer */ if (curlhelp_initwritebuffer( &header_buf ) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for header\n" ); - curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback); - curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_HEADERFUNCTION, (curl_write_callback)curlhelp_buffer_write_callback), "CURLOPT_HEADERFUNCTION"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_WRITEHEADER, (void *)&header_buf), "CURLOPT_WRITEHEADER"); /* set the error buffer */ - curl_easy_setopt (curl, CURLOPT_ERRORBUFFER, errbuf); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_ERRORBUFFER, errbuf), "CURLOPT_ERRORBUFFER"); /* set timeouts */ - curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout); - curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout), "CURLOPT_CONNECTTIMEOUT"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); /* compose URL */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", server_address, server_url); - curl_easy_setopt (curl, CURLOPT_URL, url); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); /* set port */ - curl_easy_setopt (curl, CURLOPT_PORT, server_port); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); /* set HTTP method */ if (http_method) { if (!strcmp(http_method, "POST")) - curl_easy_setopt (curl, CURLOPT_POST, 1); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_POST, 1), "CURLOPT_POST"); else if (!strcmp(http_method, "PUT")) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 12, 1) - curl_easy_setopt (curl, CURLOPT_UPLOAD, 1); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_UPLOAD, 1), "CURLOPT_UPLOAD"); #else - curl_easy_setopt (curl, CURLOPT_PUT, 1); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PUT, 1), "CURLOPT_PUT"); #endif else - curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method), "CURLOPT_CUSTOMREQUEST"); } /* set hostname (virtual hosts) */ @@ -317,44 +328,44 @@ check_http (void) header_list = curl_slist_append (header_list, http_header); /* set HTTP headers */ - curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ); + handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ), "CURLOPT_HTTPHEADER"); /* set SSL version, warn about unsecure or unsupported versions */ if (use_ssl) { - curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version), "CURLOPT_SSLVERSION"); } /* client certificate and key to present to server (SSL) */ if (client_cert) - curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSLCERT, client_cert), "CURLOPT_SSLCERT"); if (client_privkey) - curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey); - if (ca_cert) - curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert); - - /* per default if we have a CA verify both the peer and the - * hostname in the certificate, can be switched off later */ - curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2); - curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2); - - /* backward-compatible behaviour, be tolerant in checks - * TODO: depending on more options have aspects we want - * to be less tolerant about ssl verfications - */ - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0); - curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0); - + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey), "CURLOPT_SSLKEY"); + if (ca_cert) { + /* per default if we have a CA verify both the peer and the + * hostname in the certificate, can be switched off later */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert), "CURLOPT_CAINFO"); + handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2), "CURLOPT_SSL_VERIFYPEER"); + handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2), "CURLOPT_SSL_VERIFYHOST"); + } else { + /* backward-compatible behaviour, be tolerant in checks + * TODO: depending on more options have aspects we want + * to be less tolerant about ssl verfications + */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0), "CURLOPT_SSL_VERIFYPEER"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0), "CURLOPT_SSL_VERIFYHOST"); + } + /* set callback to extract certificate */ if(check_cert) { - curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun); + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); } /* set default or user-given user agent identification */ - curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent), "CURLOPT_USERAGENT"); /* authentication */ if (strcmp(user_auth, "")) - curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth), "CURLOPT_USERPWD"); /* TODO: parameter auth method, bitfield of following methods: * CURLAUTH_BASIC (default) @@ -368,17 +379,12 @@ check_http (void) * CURLAUTH_ANYSAFE: most secure, without BASIC * or CURLAUTH_ANY: most secure, even BASIC if necessary * - * curl_easy_setopt( curl, CURLOPT_HTTPAUTH, (long)CURLAUTH_DIGEST ); + * handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_HTTPAUTH, (long)CURLAUTH_DIGEST ), "CURLOPT_HTTPAUTH"); */ - /* TODO: --cacert: CA certificate file to verify SSL connection against (SSL) */ - /* if( args_info.cacert_given ) { - curl_easy_setopt( curl, CURLOPT_CAINFO, args_info.cacert_arg ); - } */ - /* handle redirections */ if (onredirect == STATE_DEPENDENT) { - curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1), "CURLOPT_FOLLOWLOCATION"); /* TODO: handle the following aspects of redirection CURLOPT_POSTREDIR: method switch CURLINFO_REDIRECT_URL: custom redirect option @@ -389,15 +395,15 @@ check_http (void) /* no-body */ if (no_body) - curl_easy_setopt (curl, CURLOPT_NOBODY, 1); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_NOBODY, 1), "CURLOPT_NOBODY"); /* IPv4 or IPv6 forced DNS resolution */ if (address_family == AF_UNSPEC) - curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_WHATEVER)"); else if (address_family == AF_INET) - curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V4)"); else if (address_family == AF_INET6) - curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V6)"); /* either send http POST data (any data, not only POST)*/ if (!strcmp(http_method, "POST") ||!strcmp(http_method, "PUT")) { @@ -412,12 +418,12 @@ check_http (void) http_post_data = ""; if (!strcmp(http_method, "POST")) { /* POST method, set payload with CURLOPT_POSTFIELDS */ - curl_easy_setopt (curl, CURLOPT_POSTFIELDS, http_post_data); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_POSTFIELDS, http_post_data), "CURLOPT_POSTFIELDS"); } else if (!strcmp(http_method, "PUT")) { - curl_easy_setopt (curl, CURLOPT_READFUNCTION, (curl_read_callback)curlhelp_buffer_read_callback); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_READFUNCTION, (curl_read_callback)curlhelp_buffer_read_callback), "CURLOPT_READFUNCTION"); curlhelp_initreadbuffer (&put_buf, http_post_data, strlen (http_post_data)); - curl_easy_setopt (curl, CURLOPT_READDATA, (void *)&put_buf); - curl_easy_setopt (curl, CURLOPT_INFILESIZE, (curl_off_t)strlen (http_post_data)); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_READDATA, (void *)&put_buf), "CURLOPT_READDATA"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_INFILESIZE, (curl_off_t)strlen (http_post_data)), "CURLOPT_INFILESIZE"); } } @@ -432,7 +438,6 @@ check_http (void) /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { - remove_newlines (errbuf); snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s"), server_port, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); @@ -451,12 +456,12 @@ check_http (void) /* we got the data and we executed the request in a given time, so we can append * performance data to the answer always */ - curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time); + handle_curl_option_return_code (curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time), "CURLINFO_TOTAL_TIME"); if(show_extended_perfdata) { - curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME, &time_connect); - curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME, &time_appconnect); - curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME, &time_headers); - curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME, &time_firstbyte); + handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME, &time_connect), "CURLINFO_CONNECT_TIME"); + handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME, &time_appconnect), "CURLINFO_APPCONNECT_TIME"); + handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME, &time_headers), "CURLINFO_PRETRANSFER_TIME"); + handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME, &time_firstbyte), "CURLINFO_STARTTRANSFER_TIME"); snprintf(perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;; size=%dB;;; time_connect=%.6gs;;;; %s time_headers=%.6gs;;;; time_firstbyte=%.6gs;;;; time_transfer=%.6gs;;;;", total_time, warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, @@ -489,7 +494,7 @@ check_http (void) } /* get result code from cURL */ - curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code); + handle_curl_option_return_code (curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code), "CURLINFO_RESPONSE_CODE"); if (verbose>=2) printf ("* curl CURLINFO_RESPONSE_CODE is %d\n", code); -- cgit v0.10-9-g596f From cee5f2777d022cb5333f6155c6bb54c77949225c Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Tue, 18 Apr 2017 15:17:38 -0400 Subject: small fix and we see CURLOPT_SSL_CTX_FUNCTION does not work on Centos 6? diff --git a/plugins/check_curl.c b/plugins/check_curl.c index f8c8832..ff79f15 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -248,7 +248,7 @@ handle_curl_option_return_code (CURLcode res, const char* option) { if (res != CURLE_OK) { snprintf (msg, DEFAULT_BUFFER_SIZE, _("Error while setting cURL option '%s': cURL returned %d - %s"), - res, curl_easy_strerror(res)); + option, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } } diff --git a/po/de.po b/po/de.po index 72694e2..919fae3 100644 --- a/po/de.po +++ b/po/de.po @@ -13,10 +13,10 @@ msgstr "" "PO-Revision-Date: 2004-12-23 17:46+0100\n" "Last-Translator: <>\n" "Language-Team: English \n" -"Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-1\n" "Content-Transfer-Encoding: 8bit\n" +"Language: en\n" "Plural-Forms: nplurals=2; plural=(n > 1);X-Generator: KBabel 1.3.1\n" #: plugins/check_by_ssh.c:86 plugins/check_cluster.c:76 plugins/check_dig.c:88 @@ -5438,8 +5438,8 @@ msgstr "" #: plugins/negate.c:174 msgid "" -"Ok must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or integer " -"(0-3)." +"Ok must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or integer (0-" +"3)." msgstr "" #: plugins/negate.c:180 -- cgit v0.10-9-g596f From 55e8d89b0a24dc8a1a3d6ea031a2189b1cf3f497 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 14:36:01 +0200 Subject: some work on certificate checking for non-OpenSSL libraries diff --git a/plugins/check_curl.c b/plugins/check_curl.c index ff79f15..5ed47e2 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -149,6 +149,10 @@ int onredirect = STATE_OK; int use_ssl = FALSE; int use_sni = TRUE; int check_cert = FALSE; +union { + struct curl_slist* to_info; + struct curl_certinfo* to_certinfo; +} cert_ptr; int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; @@ -212,6 +216,10 @@ main (int argc, char **argv) int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) { + /* TODO: we get all certificates of the chain, so which ones + * should we test? + * TODO: is the last certificate always the server certificate? + */ cert = X509_STORE_CTX_get_current_cert(x509_ctx); return 1; } @@ -330,6 +338,8 @@ check_http (void) /* set HTTP headers */ handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ), "CURLOPT_HTTPHEADER"); +#ifdef LIBCURL_FEATURE_SSL + /* set SSL version, warn about unsecure or unsupported versions */ if (use_ssl) { handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSLVERSION, ssl_version), "CURLOPT_SSLVERSION"); @@ -344,7 +354,7 @@ check_http (void) /* per default if we have a CA verify both the peer and the * hostname in the certificate, can be switched off later */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert), "CURLOPT_CAINFO"); - handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 2), "CURLOPT_SSL_VERIFYPEER"); + handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2), "CURLOPT_SSL_VERIFYHOST"); } else { /* backward-compatible behaviour, be tolerant in checks @@ -354,11 +364,28 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0), "CURLOPT_SSL_VERIFYHOST"); } - - /* set callback to extract certificate */ - if(check_cert) { + + /* try hard to get a stack of certificates to verify against */ + if (check_cert) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) + /* inform curl to report back certificates (this works for OpenSSL, NSS at least) */ + curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L); +#ifdef USE_OPENSSL + /* set callback to extract certificate with OpenSSL context function (works with + * OpenSSL only!) + */ handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); - } +#endif /* USE_OPENSSL */ +#else /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ +#ifdef USE_OPENSSL + /* Too old curl library, hope we have OpenSSL */ + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); +#else + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (no CURLOPT_SSL_CTX_FUNCTION, no OpenSSL library)\n"); +#endif /* USE_OPENSSL */ +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ + +#endif /* HAVE_SSL */ /* set default or user-given user agent identification */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent), "CURLOPT_USERAGENT"); @@ -402,8 +429,10 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_WHATEVER)"); else if (address_family == AF_INET) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V4)"); +#ifdef USE_IPV6 else if (address_family == AF_INET6) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V6)"); +#endif /* either send http POST data (any data, not only POST)*/ if (!strcmp(http_method, "POST") ||!strcmp(http_method, "PUT")) { @@ -444,14 +473,41 @@ check_http (void) } /* certificate checks */ -#ifdef HAVE_SSL +#ifdef LIBCURL_FEATURE_SSL if (use_ssl == TRUE) { if (check_cert == TRUE) { + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + cert_ptr.to_info = NULL; + res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); + if (!res && cert_ptr.to_info) { + int i; + for (i = 0; i < cert_ptr.to_certinfo->num_of_certs; i++) { + struct curl_slist *slist; + for (slist = cert_ptr.to_certinfo->certinfo[i]; slist; slist = slist->next) { + if (verbose >= 2) + printf ("%d ** %s\n", i, slist->data); + } + } + } else { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates - cURL returned %d - %s"), + res, curl_easy_strerror(res)); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + /* check certificate with OpenSSL functions, curl has been built against OpenSSL + * and we actually have OpenSSL in the monitoring tools + */ +#ifdef HAVE_SSL +#ifdef USE_OPENSSL result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); - return(result); +#endif /* USE_OPENSSL */ +#endif /* HAVE_SSL */ + return result; } } -#endif /* HAVE_SSL */ +#endif /* LIBCURL_FEATURE_SSL */ /* we got the data and we executed the request in a given time, so we can append * performance data to the answer always @@ -481,7 +537,6 @@ check_http (void) (int)body_buf.buflen); } - /* return a CRITICAL status if we couldn't read any data */ if (strlen(header_buf.buf) == 0 && strlen(body_buf.buf) == 0) die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); @@ -605,6 +660,16 @@ check_http (void) /* make sure the page is of an appropriate size * TODO: as far I can tell check_http gets the full size of header and * if -N is not given header+body. Does this make sense? + * + * TODO: check_http.c had a get_length function, the question is really + * here what to use? the raw data size of the header_buf, the value of + * Content-Length, both and warn if they differ? Should the length be + * header+body or only body? + * + * One possible policy: + * - use header_buf.buflen (warning, if it mismatches to the Content-Length value + * - if -N (nobody) is given, use Content-Length only and hope the server set + * the value correcly */ page_len = header_buf.buflen + body_buf.buflen; if ((max_page_len > 0) && (page_len > max_page_len)) { @@ -637,8 +702,8 @@ check_http (void) curlhelp_free_statusline(&status_line); curl_easy_cleanup (curl); curl_global_cleanup (); - curlhelp_freewritebuffer(&body_buf); - curlhelp_freewritebuffer(&header_buf); + curlhelp_freewritebuffer (&body_buf); + curlhelp_freewritebuffer (&header_buf); if (!strcmp (http_method, "PUT")) { curlhelp_freereadbuffer (&put_buf); } @@ -1493,6 +1558,7 @@ get_header_value (const struct phr_header* headers, const size_t nof_headers, co return NULL; } +/* TODO: use CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); here */ static time_t parse_time_string (const char *string) { -- cgit v0.10-9-g596f From 88f566adf5d8d852298294474a4dfabe4be6d927 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 10:42:37 -0400 Subject: fixed some libcurl checks and minimal versions diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 5ed47e2..9b14486 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -312,11 +312,7 @@ check_http (void) if (!strcmp(http_method, "POST")) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_POST, 1), "CURLOPT_POST"); else if (!strcmp(http_method, "PUT")) -#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 12, 1) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_UPLOAD, 1), "CURLOPT_UPLOAD"); -#else - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PUT, 1), "CURLOPT_PUT"); -#endif else handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method), "CURLOPT_CUSTOMREQUEST"); } @@ -370,22 +366,22 @@ check_http (void) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) /* inform curl to report back certificates (this works for OpenSSL, NSS at least) */ curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L); -#ifdef USE_OPENSSL +#ifdef LIBCURL_USES_OPENSSL /* set callback to extract certificate with OpenSSL context function (works with * OpenSSL only!) */ handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); #endif /* USE_OPENSSL */ #else /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ -#ifdef USE_OPENSSL +#ifdef LIBCURL_USES_OPENSSL /* Too old curl library, hope we have OpenSSL */ handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); #else die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (no CURLOPT_SSL_CTX_FUNCTION, no OpenSSL library)\n"); -#endif /* USE_OPENSSL */ +#endif /* LIBCURL_USES_OPENSSL */ #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ -#endif /* HAVE_SSL */ +#endif /* LIBCURL_FEATURE_SSL */ /* set default or user-given user agent identification */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent), "CURLOPT_USERAGENT"); @@ -429,7 +425,7 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_WHATEVER)"); else if (address_family == AF_INET) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V4)"); -#ifdef USE_IPV6 +#if defined (USE_IPV6) && defined (LIBCURL_FEATURE_IPV6) else if (address_family == AF_INET6) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6), "CURLOPT_IPRESOLVE(CURL_IPRESOLVE_V6)"); #endif @@ -500,9 +496,9 @@ check_http (void) * and we actually have OpenSSL in the monitoring tools */ #ifdef HAVE_SSL -#ifdef USE_OPENSSL +#ifdef LIBCURL_USES_OPENSSL result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); -#endif /* USE_OPENSSL */ +#endif /* LIBCURL_USES_OPENSSL */ #endif /* HAVE_SSL */ return result; } @@ -1061,7 +1057,7 @@ process_arguments (int argc, char **argv) address_family = AF_INET; break; case '6': -#ifdef USE_IPV6 +#if defined (USE_IPV6) && defined (LIBCURL_FEATURE_IPV6) address_family = AF_INET6; #else usage4 (_("IPv6 support not available")); -- cgit v0.10-9-g596f From 260291c08bcba4335755c556802d0591b7580b34 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 16:38:30 +0000 Subject: made check_curl compile also if we have openssl disabled diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 9b14486..b513712 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -157,7 +157,9 @@ int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; +#ifdef HAVE_SSL X509 *cert = NULL; +#endif int no_body = FALSE; int maximum_age = -1; int address_family = AF_UNSPEC; @@ -214,6 +216,8 @@ main (int argc, char **argv) return result; } +#ifdef HAVE_SSL + int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) { /* TODO: we get all certificates of the chain, so which ones @@ -231,6 +235,8 @@ CURLcode sslctxfun(CURL *curl, SSL_CTX *sslctx, void *parm) return CURLE_OK; } +#endif /* HAVE_SSL */ + /* Checks if the server 'reply' is one of the expected 'statuscodes' */ static int expected_statuscode (const char *reply, const char *statuscodes) -- cgit v0.10-9-g596f From f99b9352d4f6f7d33fc53443228390d1df08c3a1 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 19:31:41 +0200 Subject: for now we set LIBCURL_USES_OPENSSL always diff --git a/plugins/check_curl.c b/plugins/check_curl.c index b513712..5aee165 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -49,6 +49,9 @@ const char *email = "devel@monitoring-plugins.org"; #include "curl/curl.h" #include "curl/easy.h" +/* TODO: probe this one, how!? */ +#define LIBCURL_USES_OPENSSL + #include "picohttpparser.h" #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) -- cgit v0.10-9-g596f From e65cf6a32fee3ead82e340b42b60ef65a2ba5b19 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 18:58:56 +0000 Subject: small fixes and cleanups around SSL, be more tolerant to -S options diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 5aee165..f7c7596 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -43,7 +43,7 @@ const char *email = "devel@monitoring-plugins.org"; #include "utils.h" #ifndef LIBCURL_PROTOCOL_HTTP -#error libcurl compiled without HTTP support, compiling check_curl plugin makes not much sense +#error libcurl compiled without HTTP support, compiling check_curl plugin does not makes a lot of sense #endif #include "curl/curl.h" @@ -739,6 +739,7 @@ process_arguments (int argc, char **argv) }; int option = 0; + int got_plus = 0; static struct option longopts[] = { STD_LONG_OPTS, {"link", no_argument, 0, 'L'}, @@ -933,7 +934,6 @@ process_arguments (int argc, char **argv) * parameters, like -S and -C combinations */ ssl_version = CURL_SSLVERSION_TLSv1_0; if (c=='S' && optarg != NULL) { - int got_plus = 0; char *plus_ptr = strchr(optarg, '+'); if (plus_ptr) { got_plus = 1; @@ -948,27 +948,26 @@ process_arguments (int argc, char **argv) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) ssl_version = CURL_SSLVERSION_TLSv1_0; #else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); -#endif + ssl_version = CURL_SSLVERSION_DEFAULT; +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ else if (!strcmp (optarg, "1.1")) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) ssl_version = CURL_SSLVERSION_TLSv1_1; #else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); -#endif + ssl_version = CURL_SSLVERSION_DEFAULT; +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ else if (!strcmp (optarg, "1.2")) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) ssl_version = CURL_SSLVERSION_TLSv1_2; #else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3")); -#endif + ssl_version = CURL_SSLVERSION_DEFAULT; +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ else if (!strcmp (optarg, "1.3")) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 52, 0) ssl_version = CURL_SSLVERSION_TLSv1_3; #else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2")); -#endif - + ssl_version = CURL_SSLVERSION_DEFAULT; +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 52, 0) */ else usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); } @@ -1000,19 +999,20 @@ process_arguments (int argc, char **argv) break; } } -#endif +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) */ if (verbose >= 2) printf(_("* Set SSL/TLS version to %d\n"), ssl_version); if (server_port == HTTP_PORT) server_port = HTTPS_PORT; -#else + break; +#else /* LIBCURL_FEATURE_SSL */ /* -C -J and -K fall through to here without SSL */ usage4 (_("Invalid option - SSL is not available")); -#endif break; case SNI_OPTION: /* --sni is parsed, but ignored, the default is TRUE with libcurl */ use_sni = TRUE; break; +#endif /* LIBCURL_FEATURE_SSL */ case 'f': /* onredirect */ if (!strcmp (optarg, "ok")) onredirect = STATE_OK; -- cgit v0.10-9-g596f From 995ab6572f7ace6688ea9df7534b4dae8f7cb31d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 19 Apr 2017 21:12:23 +0200 Subject: using curl_getdate instead of local parse_time_string, added verbose debug code for -M diff --git a/plugins/check_curl.c b/plugins/check_curl.c index f7c7596..b002637 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -184,7 +184,6 @@ int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); char *perfd_time_ssl (double microsec); char *get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header); -static time_t parse_time_string (const char *string); int check_document_dates (const curlhelp_write_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); void remove_newlines (char *); @@ -1563,98 +1562,6 @@ get_header_value (const struct phr_header* headers, const size_t nof_headers, co return NULL; } -/* TODO: use CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); here */ -static time_t -parse_time_string (const char *string) -{ - struct tm tm; - time_t t; - memset (&tm, 0, sizeof(tm)); - - /* Like this: Tue, 25 Dec 2001 02:59:03 GMT */ - - if (isupper (string[0]) && /* Tue */ - islower (string[1]) && - islower (string[2]) && - ',' == string[3] && - ' ' == string[4] && - (isdigit(string[5]) || string[5] == ' ') && /* 25 */ - isdigit (string[6]) && - ' ' == string[7] && - isupper (string[8]) && /* Dec */ - islower (string[9]) && - islower (string[10]) && - ' ' == string[11] && - isdigit (string[12]) && /* 2001 */ - isdigit (string[13]) && - isdigit (string[14]) && - isdigit (string[15]) && - ' ' == string[16] && - isdigit (string[17]) && /* 02: */ - isdigit (string[18]) && - ':' == string[19] && - isdigit (string[20]) && /* 59: */ - isdigit (string[21]) && - ':' == string[22] && - isdigit (string[23]) && /* 03 */ - isdigit (string[24]) && - ' ' == string[25] && - 'G' == string[26] && /* GMT */ - 'M' == string[27] && /* GMT */ - 'T' == string[28]) { - - tm.tm_sec = 10 * (string[23]-'0') + (string[24]-'0'); - tm.tm_min = 10 * (string[20]-'0') + (string[21]-'0'); - tm.tm_hour = 10 * (string[17]-'0') + (string[18]-'0'); - tm.tm_mday = 10 * (string[5] == ' ' ? 0 : string[5]-'0') + (string[6]-'0'); - tm.tm_mon = (!strncmp (string+8, "Jan", 3) ? 0 : - !strncmp (string+8, "Feb", 3) ? 1 : - !strncmp (string+8, "Mar", 3) ? 2 : - !strncmp (string+8, "Apr", 3) ? 3 : - !strncmp (string+8, "May", 3) ? 4 : - !strncmp (string+8, "Jun", 3) ? 5 : - !strncmp (string+8, "Jul", 3) ? 6 : - !strncmp (string+8, "Aug", 3) ? 7 : - !strncmp (string+8, "Sep", 3) ? 8 : - !strncmp (string+8, "Oct", 3) ? 9 : - !strncmp (string+8, "Nov", 3) ? 10 : - !strncmp (string+8, "Dec", 3) ? 11 : - -1); - tm.tm_year = ((1000 * (string[12]-'0') + - 100 * (string[13]-'0') + - 10 * (string[14]-'0') + - (string[15]-'0')) - - 1900); - - tm.tm_isdst = 0; /* GMT is never in DST, right? */ - - if (tm.tm_mon < 0 || tm.tm_mday < 1 || tm.tm_mday > 31) - return 0; - - /* - This is actually wrong: we need to subtract the local timezone - offset from GMT from this value. But, that's ok in this usage, - because we only comparing these two GMT dates against each other, - so it doesn't matter what time zone we parse them in. - */ - - t = mktime (&tm); - if (t == (time_t) -1) t = 0; - - if (verbose) { - const char *s = string; - while (*s && *s != '\r' && *s != '\n') - fputc (*s++, stdout); - printf (" ==> %lu\n", (unsigned long) t); - } - - return t; - - } else { - return 0; - } -} - int check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFAULT_BUFFER_SIZE]) { @@ -1680,8 +1587,10 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sDocument modification date unknown, "), *msg); date_result = max_state_alt(STATE_CRITICAL, date_result); } else { - time_t srv_data = parse_time_string (server_date); - time_t doc_data = parse_time_string (document_date); + time_t srv_data = curl_getdate (server_date, NULL); + time_t doc_data = curl_getdate (document_date, NULL); + if (verbose >= 2) + printf ("* server date: '%s' (%d), doc_date: '%s' (%d)\n", server_date, srv_data, document_date, doc_data); if (srv_data <= 0) { snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sServer date \"%100s\" unparsable, "), *msg, server_date); date_result = max_state_alt(STATE_CRITICAL, date_result); -- cgit v0.10-9-g596f From c0be97f1541ee71a6414e3ad05f9d5a5fe480c98 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 20 Apr 2017 16:37:16 +0000 Subject: probing for SSL library used by libcurl and started improving the certificate check -C diff --git a/plugins/check_curl.c b/plugins/check_curl.c index b002637..d3f3930 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -91,6 +91,14 @@ typedef struct { char *first_line; /* a copy of the first line */ } curlhelp_statusline; +typedef enum curlhelp_ssl_library { + CURLHELP_SSL_LIBRARY_UNKNOWN, + CURLHELP_SSL_LIBRARY_OPENSSL, + CURLHELP_SSL_LIBRARY_LIBRESSL, + CURLHELP_SSL_LIBRARY_GNUTLS, + CURLHELP_SSL_LIBRARY_NSS +} curlhelp_ssl_library; + enum { REGS = 2, MAX_RE_SIZE = 256 @@ -160,12 +168,14 @@ int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; +int is_openssl_callback = FALSE; #ifdef HAVE_SSL X509 *cert = NULL; #endif int no_body = FALSE; int maximum_age = -1; int address_family = AF_UNSPEC; +curlhelp_ssl_library ssl_library = CURLHELP_SSL_LIBRARY_UNKNOWN; int process_arguments (int, char**); void handle_curl_option_return_code (CURLcode res, const char* option); @@ -179,6 +189,8 @@ void curlhelp_freewritebuffer (curlhelp_write_curlbuf*); int curlhelp_initreadbuffer (curlhelp_read_curlbuf *, const char *, size_t); int curlhelp_buffer_read_callback (void *, size_t , size_t , void *); void curlhelp_freereadbuffer (curlhelp_read_curlbuf *); +curlhelp_ssl_library curlhelp_get_ssl_library (CURL*); +const char* curlhelp_get_ssl_library_string (curlhelp_ssl_library); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); @@ -368,25 +380,59 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0), "CURLOPT_SSL_VERIFYHOST"); } + + /* detect SSL library used by libcurl */ + ssl_library = curlhelp_get_ssl_library (curl); /* try hard to get a stack of certificates to verify against */ if (check_cert) #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) - /* inform curl to report back certificates (this works for OpenSSL, NSS at least) */ - curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L); -#ifdef LIBCURL_USES_OPENSSL - /* set callback to extract certificate with OpenSSL context function (works with - * OpenSSL only!) - */ - handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); + /* inform curl to report back certificates */ + switch (ssl_library) { + case CURLHELP_SSL_LIBRARY_OPENSSL: + case CURLHELP_SSL_LIBRARY_LIBRESSL: + /* set callback to extract certificate with OpenSSL context function (works with + * OpenSSL-style libraries only!) */ +#ifdef USE_OPENSSL + /* libcurl and monitoring plugins built with OpenSSL, good */ + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); + is_openssl_callback = TRUE; +#else /* USE_OPENSSL */ #endif /* USE_OPENSSL */ + /* libcurl is built with OpenSSL, monitoring plugins, so falling + * back to manually extracting certificate information */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L), "CURLOPT_CERTINFO"); + break; + + case CURLHELP_SSL_LIBRARY_NSS: +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) + /* NSS: support for CERTINFO is implemented since 7.34.0 */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L), "CURLOPT_CERTINFO"); +#else /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (libcurl linked with SSL library '%s' is too old)\n", curlhelp_get_ssl_library_string (ssl_library)); +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ + break; + + case CURLHELP_SSL_LIBRARY_GNUTLS: +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 42, 0) + /* GnuTLS: support for CERTINFO is implemented since 7.42.0 */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L), "CURLOPT_CERTINFO"); +#else /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 42, 0) */ + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (libcurl linked with SSL library '%s' is too old)\n", curlhelp_get_ssl_library_string (ssl_library)); +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 42, 0) */ + break; + + case CURLHELP_SSL_LIBRARY_UNKNOWN: + default: + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (unknown SSL library '%s', must implement first)\n", curlhelp_get_ssl_library_string (ssl_library)); + break; + } #else /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ -#ifdef LIBCURL_USES_OPENSSL - /* Too old curl library, hope we have OpenSSL */ - handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); -#else - die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (no CURLOPT_SSL_CTX_FUNCTION, no OpenSSL library)\n"); -#endif /* LIBCURL_USES_OPENSSL */ + /* old libcurl, our only hope is OpenSSL, otherwise we are out of luck */ + if (ssl_library == CURLHELP_SSL_LIBRARY_OPENSSL || ssl_library == CURLHELP_SSL_LIBRARY_LIBRESSL) + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_SSL_CTX_FUNCTION, sslctxfun), "CURLOPT_SSL_CTX_FUNCTION"); + else + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (no CURLOPT_SSL_CTX_FUNCTION, no OpenSSL library or libcurl too old and has no CURLOPT_CERTINFO)\n"); #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ #endif /* LIBCURL_FEATURE_SSL */ @@ -480,35 +526,44 @@ check_http (void) #ifdef LIBCURL_FEATURE_SSL if (use_ssl == TRUE) { if (check_cert == TRUE) { - if (verbose >= 2) - printf ("**** REQUEST CERTIFICATES ****\n"); - cert_ptr.to_info = NULL; - res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); - if (!res && cert_ptr.to_info) { - int i; - for (i = 0; i < cert_ptr.to_certinfo->num_of_certs; i++) { - struct curl_slist *slist; - for (slist = cert_ptr.to_certinfo->certinfo[i]; slist; slist = slist->next) { - if (verbose >= 2) - printf ("%d ** %s\n", i, slist->data); + if (is_openssl_callback) { +#ifdef HAVE_SSL + /* check certificate with OpenSSL functions, curl has been built against OpenSSL + * and we actually have OpenSSL in the monitoring tools + */ + result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); + return result; +#else /* HAVE_SSL */ + die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates - OpenSSL callback used and not linked against OpenSSL\n"); +#endif /* HAVE_SSL */ + } else { + /* going with the libcurl CURLINFO data */ + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + cert_ptr.to_info = NULL; + res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); + if (!res && cert_ptr.to_info) { + int i; + for (i = 0; i < cert_ptr.to_certinfo->num_of_certs; i++) { + struct curl_slist *slist; + for (slist = cert_ptr.to_certinfo->certinfo[i]; slist; slist = slist->next) { + if (verbose >= 2) + printf ("%d ** %s\n", i, slist->data); + } } + } else { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates - cURL returned %d - %s"), + res, curl_easy_strerror(res)); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } - } else { - snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates - cURL returned %d - %s"), - res, curl_easy_strerror(res)); - die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + // TODO: either convert data to X509 certs we can check with np_net_ssl_check_certificate + // or do something on our own.. + //~ result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); + //~ return result; + die (STATE_UNKNOWN, "HTTP UNKNOWN - CERTINFO certificate checks not implemented yet\n"); } - if (verbose >= 2) - printf ("**** REQUEST CERTIFICATES ****\n"); - /* check certificate with OpenSSL functions, curl has been built against OpenSSL - * and we actually have OpenSSL in the monitoring tools - */ -#ifdef HAVE_SSL -#ifdef LIBCURL_USES_OPENSSL - result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); -#endif /* LIBCURL_USES_OPENSSL */ -#endif /* HAVE_SSL */ - return result; } } #endif /* LIBCURL_FEATURE_SSL */ @@ -1617,3 +1672,56 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA return date_result; } + +/* TODO: is there a better way in libcurl to check for the SSL library? */ +curlhelp_ssl_library +curlhelp_get_ssl_library (CURL* curl) +{ + curl_version_info_data* version_data; + char *ssl_version; + char *library; + curlhelp_ssl_library ssl_library = CURLHELP_SSL_LIBRARY_UNKNOWN; + + version_data = curl_version_info (CURLVERSION_NOW); + if (version_data == NULL) return CURLHELP_SSL_LIBRARY_UNKNOWN; + + ssl_version = strdup (version_data->ssl_version); + if (ssl_version == NULL ) return CURLHELP_SSL_LIBRARY_UNKNOWN; + + library = strtok (ssl_version, "/"); + if (library == NULL) return CURLHELP_SSL_LIBRARY_UNKNOWN; + + if (strcmp (library, "OpenSSL") == 0) + ssl_library = CURLHELP_SSL_LIBRARY_OPENSSL; + else if (strcmp (library, "LibreSSL") == 0) + ssl_library = CURLHELP_SSL_LIBRARY_LIBRESSL; + else if (strcmp (library, "GnuTLS") == 0) + ssl_library = CURLHELP_SSL_LIBRARY_GNUTLS; + else if (strcmp (library, "NSS") == 0) + ssl_library = CURLHELP_SSL_LIBRARY_NSS; + + if (verbose >= 2) + printf ("* SSL library string is : %s %s (%d)\n", version_data->ssl_version, library, ssl_library); + + free (ssl_version); + + return ssl_library; +} + +const char* +curlhelp_get_ssl_library_string (curlhelp_ssl_library ssl_library) +{ + switch (ssl_library) { + case CURLHELP_SSL_LIBRARY_OPENSSL: + return "OpenSSL"; + case CURLHELP_SSL_LIBRARY_LIBRESSL: + return "LibreSSL"; + case CURLHELP_SSL_LIBRARY_GNUTLS: + return "GnuTLS"; + case CURLHELP_SSL_LIBRARY_NSS: + return "NSS"; + case CURLHELP_SSL_LIBRARY_UNKNOWN: + default: + return "unknown"; + } +} -- cgit v0.10-9-g596f From f4a7a3b3e7aa0cda2153b68fecaa1f76ed2b2392 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 21 Apr 2017 08:20:52 +0200 Subject: small cleanup diff --git a/plugins/check_curl.c b/plugins/check_curl.c index d3f3930..261c534 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -49,9 +49,6 @@ const char *email = "devel@monitoring-plugins.org"; #include "curl/curl.h" #include "curl/easy.h" -/* TODO: probe this one, how!? */ -#define LIBCURL_USES_OPENSSL - #include "picohttpparser.h" #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) @@ -91,6 +88,7 @@ typedef struct { char *first_line; /* a copy of the first line */ } curlhelp_statusline; +/* to know the underlying SSL library used by libcurl */ typedef enum curlhelp_ssl_library { CURLHELP_SSL_LIBRARY_UNKNOWN, CURLHELP_SSL_LIBRARY_OPENSSL, @@ -558,10 +556,11 @@ check_http (void) } if (verbose >= 2) printf ("**** REQUEST CERTIFICATES ****\n"); - // TODO: either convert data to X509 certs we can check with np_net_ssl_check_certificate - // or do something on our own.. - //~ result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); - //~ return result; + /* TODO: either convert data to X509 certs we can check with np_net_ssl_check_certificate + * or do something on our own.. + * result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); + * return result; + */ die (STATE_UNKNOWN, "HTTP UNKNOWN - CERTINFO certificate checks not implemented yet\n"); } } @@ -1475,8 +1474,7 @@ curlhelp_freereadbuffer (curlhelp_read_curlbuf *buf) buf->buf = NULL; } -/* TODO: should be moved into 'gl' and should be probed, glibc has - * a strrstr +/* TODO: where to put this, it's actually part of sstrings2 (logically)? */ const char* strrstr2(const char *haystack, const char *needle) -- cgit v0.10-9-g596f From 2da757519649f8806be1741ce7232724e5a03f24 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 21 Apr 2017 09:03:28 +0000 Subject: preparing for certificate checks (non-OpenSSL version) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 261c534..6575af7 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -158,18 +158,21 @@ int onredirect = STATE_OK; int use_ssl = FALSE; int use_sni = TRUE; int check_cert = FALSE; -union { +typedef union { struct curl_slist* to_info; struct curl_certinfo* to_certinfo; -} cert_ptr; +} cert_ptr_union; +cert_ptr_union cert_ptr; int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; int is_openssl_callback = FALSE; #ifdef HAVE_SSL +#ifdef USE_OPENSSL X509 *cert = NULL; -#endif +#endif /* USE_OPENSSL */ +#endif /* HAVE_SSL */ int no_body = FALSE; int maximum_age = -1; int address_family = AF_UNSPEC; @@ -189,6 +192,7 @@ int curlhelp_buffer_read_callback (void *, size_t , size_t , void *); void curlhelp_freereadbuffer (curlhelp_read_curlbuf *); curlhelp_ssl_library curlhelp_get_ssl_library (CURL*); const char* curlhelp_get_ssl_library_string (curlhelp_ssl_library); +int net_noopenssl_check_certificate (cert_ptr_union*, int, int); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); @@ -229,6 +233,7 @@ main (int argc, char **argv) } #ifdef HAVE_SSL +#ifdef USE_OPENSSL int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) { @@ -247,6 +252,7 @@ CURLcode sslctxfun(CURL *curl, SSL_CTX *sslctx, void *parm) return CURLE_OK; } +#endif /* USE_OPENSSL */ #endif /* HAVE_SSL */ /* Checks if the server 'reply' is one of the expected 'statuscodes' */ @@ -535,33 +541,19 @@ check_http (void) die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates - OpenSSL callback used and not linked against OpenSSL\n"); #endif /* HAVE_SSL */ } else { - /* going with the libcurl CURLINFO data */ - if (verbose >= 2) - printf ("**** REQUEST CERTIFICATES ****\n"); + /* We assume we don't have OpenSSL and np_net_ssl_check_certificate at our disposal, + * so we use the libcurl CURLINFO data + */ cert_ptr.to_info = NULL; res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); if (!res && cert_ptr.to_info) { - int i; - for (i = 0; i < cert_ptr.to_certinfo->num_of_certs; i++) { - struct curl_slist *slist; - for (slist = cert_ptr.to_certinfo->certinfo[i]; slist; slist = slist->next) { - if (verbose >= 2) - printf ("%d ** %s\n", i, slist->data); - } - } + result = net_noopenssl_check_certificate(&cert_ptr, days_till_exp_warn, days_till_exp_crit); + return result; } else { snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates - cURL returned %d - %s"), res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } - if (verbose >= 2) - printf ("**** REQUEST CERTIFICATES ****\n"); - /* TODO: either convert data to X509 certs we can check with np_net_ssl_check_certificate - * or do something on our own.. - * result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); - * return result; - */ - die (STATE_UNKNOWN, "HTTP UNKNOWN - CERTINFO certificate checks not implemented yet\n"); } } } @@ -1723,3 +1715,28 @@ curlhelp_get_ssl_library_string (curlhelp_ssl_library ssl_library) return "unknown"; } } + +#ifdef LIBCURL_FEATURE_SSL +int +net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_warn, int days_till_exp_crit) +{ + int i; + struct curl_slist *slist; + + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + + for (i = 0; i < cert_ptr->to_certinfo->num_of_certs; i++) { + for (slist = cert_ptr->to_certinfo->certinfo[i]; slist; slist = slist->next) { + if (verbose >= 2) + printf ("%d ** %s\n", i, slist->data); + } + } + + if (verbose >= 2) + printf ("**** REQUEST CERTIFICATES ****\n"); + + printf("%s\n", _("WARNING - Plugin does not support checking certificates without OpenSSL.")); + return STATE_WARNING; +} +#endif /* LIBCURL_FEATURE_SSL */ -- cgit v0.10-9-g596f From 229b9e53e17809003346df31e4c8899248f83e6f Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 21 Apr 2017 13:07:51 +0000 Subject: handling the -C check now when compiled with OpenSSL but libcurl is not compiled with OpenSSL diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 6575af7..878276e 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -531,24 +531,59 @@ check_http (void) if (use_ssl == TRUE) { if (check_cert == TRUE) { if (is_openssl_callback) { -#ifdef HAVE_SSL +#ifdef USE_OPENSSL /* check certificate with OpenSSL functions, curl has been built against OpenSSL * and we actually have OpenSSL in the monitoring tools */ result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); return result; -#else /* HAVE_SSL */ +#else /* USE_OPENSSL */ die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates - OpenSSL callback used and not linked against OpenSSL\n"); -#endif /* HAVE_SSL */ +#endif /* USE_OPENSSL */ } else { - /* We assume we don't have OpenSSL and np_net_ssl_check_certificate at our disposal, - * so we use the libcurl CURLINFO data - */ + int i; + struct curl_slist *slist; + cert_ptr.to_info = NULL; res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); if (!res && cert_ptr.to_info) { +#ifdef USE_OPENSSL + /* We have no OpenSSL in libcurl, but we can use OpenSSL for X509 cert parsing + * We only check the first certificate and assume it's the one of the server + */ + const char* raw_cert = NULL; + for (i = 0; i < cert_ptr.to_certinfo->num_of_certs; i++) { + for (slist = cert_ptr.to_certinfo->certinfo[i]; slist; slist = slist->next) { + if (verbose >= 2) + printf ("%d ** %s\n", i, slist->data); + if (strncmp (slist->data, "Cert:", 5) == 0) { + raw_cert = &slist->data[5]; + goto GOT_FIRST_CERT; + } + } + } +GOT_FIRST_CERT: + if (!raw_cert) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates from CERTINFO information - certificate data was empty")); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } + BIO* cert_BIO = BIO_new (BIO_s_mem()); + BIO_write (cert_BIO, raw_cert, strlen(raw_cert)); + cert = PEM_read_bio_X509 (cert_BIO, NULL, NULL, NULL); + if (!cert) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot read certificate from CERTINFO information - BIO error")); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } + BIO_free (cert_BIO); + result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); + return result; +#else /* USE_OPENSSL */ + /* We assume we don't have OpenSSL and np_net_ssl_check_certificate at our disposal, + * so we use the libcurl CURLINFO data + */ result = net_noopenssl_check_certificate(&cert_ptr, days_till_exp_warn, days_till_exp_crit); return result; +#endif /* USE_OPENSSL */ } else { snprintf (msg, DEFAULT_BUFFER_SIZE, _("Cannot retrieve certificates - cURL returned %d - %s"), res, curl_easy_strerror(res)); -- cgit v0.10-9-g596f From 82744e97050807fb162895ba444d5a1ebca8b823 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 21 Apr 2017 16:05:58 +0000 Subject: made non-OpenSSL version of certificate -C check work diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 878276e..603c7be 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1752,26 +1752,137 @@ curlhelp_get_ssl_library_string (curlhelp_ssl_library ssl_library) } #ifdef LIBCURL_FEATURE_SSL +time_t +parse_cert_date (const char *s) +{ + struct tm tm; + time_t date; + + if (!s) return -1; + + strptime (s, "%Y-%m-%d %H:%M:%S GMT", &tm); + date = mktime (&tm); + + return date; +} + +/* TODO: this needs cleanup in the sslutils.c, maybe we the #else case to + * OpenSSL could be this function + */ int net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_warn, int days_till_exp_crit) { int i; - struct curl_slist *slist; + struct curl_slist* slist; + int cname_found = 0; + char* start_date_str = NULL; + char* end_date_str = NULL; + time_t start_date; + time_t end_date; + char *tz; + float time_left; + int days_left; + int time_remaining; + char timestamp[50] = ""; + int status = STATE_UNKNOWN; if (verbose >= 2) printf ("**** REQUEST CERTIFICATES ****\n"); for (i = 0; i < cert_ptr->to_certinfo->num_of_certs; i++) { for (slist = cert_ptr->to_certinfo->certinfo[i]; slist; slist = slist->next) { + /* find first common name in subject, TODO: check alternative subjects for + * multi-host certificate, check wildcards + */ + if (strncmp (slist->data, "Subject:", 8) == 0) { + char* p = strstr (slist->data, "CN="); + if (p != NULL) { + if (strncmp (host_name, p+3, strlen (host_name)) == 0) { + cname_found = 1; + } + } + } else if (strncmp (slist->data, "Start Date:", 11) == 0) { + start_date_str = &slist->data[11]; + } else if (strncmp (slist->data, "Expire Date:", 12) == 0) { + end_date_str = &slist->data[12]; + } else if (strncmp (slist->data, "Cert:", 5) == 0) { + goto HAVE_FIRST_CERT; + } if (verbose >= 2) printf ("%d ** %s\n", i, slist->data); } } +HAVE_FIRST_CERT: if (verbose >= 2) printf ("**** REQUEST CERTIFICATES ****\n"); + + if (!cname_found) { + printf("%s\n",_("CRITICAL - Cannot retrieve certificate subject.")); + return STATE_CRITICAL; + } + + start_date = parse_cert_date (start_date_str); + if (start_date <= 0) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("WARNING - Unparsable 'Start Date' in certificate: '%s'"), + start_date_str); + puts (msg); + return STATE_WARNING; + } + + end_date = parse_cert_date (end_date_str); + if (end_date <= 0) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("WARNING - Unparsable 'Expire Date' in certificate: '%s'"), + start_date_str); + puts (msg); + return STATE_WARNING; + } - printf("%s\n", _("WARNING - Plugin does not support checking certificates without OpenSSL.")); - return STATE_WARNING; + time_left = difftime (end_date, time(NULL)); + days_left = time_left / 86400; + tz = getenv("TZ"); + setenv("TZ", "GMT", 1); + tzset(); + strftime(timestamp, 50, "%c %z", localtime(&end_date)); + if (tz) + setenv("TZ", tz, 1); + else + unsetenv("TZ"); + tzset(); + + if (days_left > 0 && days_left <= days_till_exp_warn) { + printf (_("%s - Certificate '%s' expires in %d day(s) (%s).\n"), (days_left>days_till_exp_crit)?"WARNING":"CRITICAL", host_name, days_left, timestamp); + if (days_left > days_till_exp_crit) + status = STATE_WARNING; + else + status = STATE_CRITICAL; + } else if (days_left == 0 && time_left > 0) { + if (time_left >= 3600) + time_remaining = (int) time_left / 3600; + else + time_remaining = (int) time_left / 60; + + printf (_("%s - Certificate '%s' expires in %u %s (%s)\n"), + (days_left>days_till_exp_crit) ? "WARNING" : "CRITICAL", host_name, time_remaining, + time_left >= 3600 ? "hours" : "minutes", timestamp); + + if ( days_left > days_till_exp_crit) + status = STATE_WARNING; + else + status = STATE_CRITICAL; + } else if (time_left < 0) { + printf(_("CRITICAL - Certificate '%s' expired on %s.\n"), host_name, timestamp); + status=STATE_CRITICAL; + } else if (days_left == 0) { + printf (_("%s - Certificate '%s' just expired (%s).\n"), (days_left>days_till_exp_crit)?"WARNING":"CRITICAL", host_name, timestamp); + if (days_left > days_till_exp_crit) + status = STATE_WARNING; + else + status = STATE_CRITICAL; + } else { + printf(_("OK - Certificate '%s' will expire on %s.\n"), host_name, timestamp); + status = STATE_OK; + } + return status; } #endif /* LIBCURL_FEATURE_SSL */ -- cgit v0.10-9-g596f From f91be546bf70787f84a30431b327d1c675de3d9d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 21 Apr 2017 18:10:55 +0200 Subject: disable non-OpenSSL code compilation in -C check if we have USE_OPENSSL set diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 603c7be..050c0d4 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1752,6 +1752,7 @@ curlhelp_get_ssl_library_string (curlhelp_ssl_library ssl_library) } #ifdef LIBCURL_FEATURE_SSL +#ifndef USE_OPENSSL time_t parse_cert_date (const char *s) { @@ -1885,4 +1886,5 @@ HAVE_FIRST_CERT: } return status; } +#endif /* USE_OPENSSL */ #endif /* LIBCURL_FEATURE_SSL */ -- cgit v0.10-9-g596f From 7c74b772ed0b35699e57ecbe8789b0436a6c67ee Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Mon, 24 Apr 2017 02:38:03 -0400 Subject: must use host_name and not server_address in URL, CN subject mismatch diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 050c0d4..87fa1da 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -325,9 +325,9 @@ check_http (void) /* compose URL */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - server_address, server_url); + host_name, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); - + /* set port */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); -- cgit v0.10-9-g596f From ac08e9b2751a93dd65b5b66b59063f098ef2dc26 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Mon, 24 Apr 2017 02:55:11 -0400 Subject: reverted hostname in URL, must use CURL_RESOLVE mayabe diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 87fa1da..e26d8d3 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -327,7 +327,7 @@ check_http (void) snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", host_name, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); - + /* set port */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); -- cgit v0.10-9-g596f From cfb7dace5405766785f31e8162c40d6bc3bc9c2a Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 27 Apr 2017 10:04:47 +0200 Subject: fixed setting host_name or server_address in curl URL option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index e26d8d3..cd00b0e 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -325,7 +325,7 @@ check_http (void) /* compose URL */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - host_name, server_url); + host_name ? host_name : server_address, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); /* set port */ -- cgit v0.10-9-g596f From 5d9104f07fd52ff3d23107fa9800c8b2a331987f Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 27 Apr 2017 14:50:20 +0200 Subject: page length is computed from header, fallback to actual body size (get_content_length) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index cd00b0e..babbcd5 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -168,11 +168,9 @@ char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; int is_openssl_callback = FALSE; -#ifdef HAVE_SSL -#ifdef USE_OPENSSL +#if defined(HAVE_SSL) && defined(USE_OPENSSL) X509 *cert = NULL; -#endif /* USE_OPENSSL */ -#endif /* HAVE_SSL */ +#endif /* defined(HAVE_SSL) && defined(USE_OPENSSL) */ int no_body = FALSE; int maximum_age = -1; int address_family = AF_UNSPEC; @@ -199,6 +197,11 @@ void curlhelp_free_statusline (curlhelp_statusline *); char *perfd_time_ssl (double microsec); char *get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header); int check_document_dates (const curlhelp_write_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); +int get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_write_curlbuf* body_buf); + +#if defined(HAVE_SSL) && defined(USE_OPENSSL) +int np_net_ssl_check_certificate(X509 *certificate, int days_till_exp_warn, int days_till_exp_crit); +#endif /* defined(HAVE_SSL) && defined(USE_OPENSSL) */ void remove_newlines (char *); void test_file (char *); @@ -756,7 +759,7 @@ GOT_FIRST_CERT: * - if -N (nobody) is given, use Content-Length only and hope the server set * the value correcly */ - page_len = header_buf.buflen + body_buf.buflen; + page_len = get_content_length(&header_buf, &body_buf); if ((max_page_len > 0) && (page_len > max_page_len)) { snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spage size %d too large, "), msg, page_len); result = max_state_alt(STATE_WARNING, result); @@ -1698,6 +1701,35 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA return date_result; } +int +get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_write_curlbuf* body_buf) +{ + const char *s; + int content_length = 0; + char *copy; + struct phr_header headers[255]; + size_t nof_headers = 255; + size_t msglen; + char *content_length_s = NULL; + curlhelp_statusline status_line; + + int res = phr_parse_response (header_buf->buf, header_buf->buflen, + &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, + headers, &nof_headers, 0); + + content_length_s = get_header_value (headers, nof_headers, "content-length"); + if (!content_length_s) { + /* TODO: or header_buf->buflen + body_buf->buflen */ + return body_buf->buflen; + } + /* TODO: trim */ + content_length = atoi (content_length_s); + + if (content_length_s) free (content_length_s); + + return content_length; +} + /* TODO: is there a better way in libcurl to check for the SSL library? */ curlhelp_ssl_library curlhelp_get_ssl_library (CURL* curl) -- cgit v0.10-9-g596f From efa7e2c1e7e90b83793cc63aa849c315f6d5d809 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 28 Apr 2017 08:39:13 +0200 Subject: changed URL construction again, IP should preceed hostname, hostname set as Host: (makes sure we get the corrent DNS entry and server) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index babbcd5..de105fb 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -328,7 +328,7 @@ check_http (void) /* compose URL */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - host_name ? host_name : server_address, server_url); + server_address ? server_address : host_name, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); /* set port */ -- cgit v0.10-9-g596f From 4b66d3d90acb6437972505d8acc56267dc119b22 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 28 Apr 2017 08:57:11 +0200 Subject: using CURLOPT_RESOLVE to make sure -I is the IP we connect to diff --git a/plugins/check_curl.c b/plugins/check_curl.c index de105fb..1aee5eb 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -112,6 +112,8 @@ int invert_regex = 0; char *server_address; char *host_name; char *server_url = DEFAULT_SERVER_URL; +char server_ip[DEFAULT_BUFFER_SIZE]; +struct curl_slist *server_ips = NULL; unsigned short server_port = HTTP_PORT; int virtual_port = 0; int host_name_length; @@ -326,11 +328,22 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout), "CURLOPT_CONNECTTIMEOUT"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); - /* compose URL */ + /* compose URL: must be the host_name, only if not given take the IP address. */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - server_address ? server_address : host_name, server_url); + host_name ? host_name : server_address, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); + /* cURL does certificate checking with this host_name (and not the virtual host? + * So we force CURLOPT_RESOLVE to make sure the resolver pickes the right IP + * for this hostname. */ +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) + if (host_name && strcmp (host_name, server_address)) { + snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); + server_ips = curl_slist_append (server_ips, server_ip); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_RESOLVE, server_ips), "CURLOPT_RESOLVE"); + } +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) */ + /* set port */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); @@ -519,8 +532,9 @@ check_http (void) if (verbose>=2 && http_post_data) printf ("**** REQUEST CONTENT ****\n%s\n", http_post_data); - /* free header list, we don't need it anymore */ - curl_slist_free_all(header_list); + /* free header and server IP resolve lists, we don't need it anymore */ + curl_slist_free_all (header_list); + curl_slist_free_all (server_ips); /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { -- cgit v0.10-9-g596f From 6bc2646409a5dd64eee45a1a6f5210b5547b47fb Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 4 May 2017 08:16:33 +0000 Subject: more tolerant CERTINFO parsing diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 1aee5eb..d96f861 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1841,18 +1841,18 @@ net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_war /* find first common name in subject, TODO: check alternative subjects for * multi-host certificate, check wildcards */ - if (strncmp (slist->data, "Subject:", 8) == 0) { + if (strncasecmp (slist->data, "Subject:", 8) == 0) { char* p = strstr (slist->data, "CN="); if (p != NULL) { if (strncmp (host_name, p+3, strlen (host_name)) == 0) { cname_found = 1; } } - } else if (strncmp (slist->data, "Start Date:", 11) == 0) { + } else if (strncasecmp (slist->data, "Start Date:", 11) == 0) { start_date_str = &slist->data[11]; - } else if (strncmp (slist->data, "Expire Date:", 12) == 0) { + } else if (strncasecmp (slist->data, "Expire Date:", 12) == 0) { end_date_str = &slist->data[12]; - } else if (strncmp (slist->data, "Cert:", 5) == 0) { + } else if (strncasecmp (slist->data, "Cert:", 5) == 0) { goto HAVE_FIRST_CERT; } if (verbose >= 2) -- cgit v0.10-9-g596f From 94d017c5ab26c65fbcc1e531210d953b5bad69a6 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 4 May 2017 17:36:45 +0200 Subject: fixed getopt (-l missing, wrong order, hard to compare with check_http.c) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index d96f861..a2ded89 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -892,7 +892,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:p:d:e:s:R:r:u:f:C:J:K:nLS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; -- cgit v0.10-9-g596f From f0cebd5153d759fe663488a1750fcbe0f5e680a1 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 4 May 2017 21:21:20 +0200 Subject: fixed failing tests due to wrong content_length calculation diff --git a/plugins/check_curl.c b/plugins/check_curl.c index a2ded89..5f6905f 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1715,6 +1715,7 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA return date_result; } + int get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_write_curlbuf* body_buf) { @@ -1733,15 +1734,17 @@ get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_wri content_length_s = get_header_value (headers, nof_headers, "content-length"); if (!content_length_s) { - /* TODO: or header_buf->buflen + body_buf->buflen */ - return body_buf->buflen; + return header_buf->buflen + body_buf->buflen; } - /* TODO: trim */ + content_length_s += strspn (content_length_s, " \t"); content_length = atoi (content_length_s); + if (content_length != body_buf->buflen) { + /* TODO: should we warn if the actual and the reported body length doen't match? */ + } if (content_length_s) free (content_length_s); - return content_length; + return header_buf->buflen + body_buf->buflen; } /* TODO: is there a better way in libcurl to check for the SSL library? */ -- cgit v0.10-9-g596f From 28a4c7076a3115d30aeb3b3b5e5bde715692e4a7 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 5 May 2017 08:42:54 +0200 Subject: synched tests/check_http.t test changes (virtualhost) into tests/check_curl.t diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index 702edb8..28dacd0 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -20,6 +20,7 @@ use FindBin qw($Bin); $ENV{'LC_TIME'} = "C"; my $common_tests = 70; +my $virtual_port_tests = 8; my $ssl_only_tests = 8; # Check that all dependent modules are available eval "use HTTP::Daemon 6.01;"; @@ -36,7 +37,7 @@ if ($@) { plan skip_all => "Missing required module for test: $@"; } else { if (-x "./$plugin") { - plan tests => $common_tests * 2 + $ssl_only_tests; + plan tests => $common_tests * 2 + $ssl_only_tests + $virtual_port_tests; } else { plan skip_all => "No $plugin compiled"; } @@ -161,6 +162,11 @@ sub run_server { $c->send_basic_header; $c->send_header('foo'); $c->send_crlf; + } elsif ($r->url->path eq "/virtual_port") { + # return sent Host header + $c->send_basic_header; + $c->send_crlf; + $c->send_response(HTTP::Response->new( 200, 'OK', undef, $r->header ('Host'))); } else { $c->send_error(HTTP::Status->RC_FORBIDDEN); } @@ -210,6 +216,37 @@ SKIP: { } +my $cmd; +# check virtual port behaviour +# +# http without virtual port +$cmd = "$command -p $port_http -u /virtual_port -r ^127.0.0.1:$port_http\$"; +$result = NPTest->testCmd( $cmd ); +is( $result->return_code, 0, $cmd); +like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + +# http with virtual port +$cmd = "$command:80 -p $port_http -u /virtual_port -r ^127.0.0.1\$"; +$result = NPTest->testCmd( $cmd ); +is( $result->return_code, 0, $cmd); +like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + +SKIP: { + skip "HTTP::Daemon::SSL not installed", 4 if ! exists $servers->{https}; + # https without virtual port + $cmd = "$command -p $port_https --ssl -u /virtual_port -r ^127.0.0.1:$port_https\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # https with virtual port + $cmd = "$command:443 -p $port_https --ssl -u /virtual_port -r ^127.0.0.1\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); +} + + sub run_common_tests { my ($opts) = @_; my $command = $opts->{command}; @@ -395,7 +432,7 @@ sub run_common_tests { # Test an external address - timeout SKIP: { - skip "This doesn't seems to work all the time", 1 unless ($ENV{HTTP_EXTERNAL}); + skip "This doesn't seem to work all the time", 1 unless ($ENV{HTTP_EXTERNAL}); $cmd = "$command -f follow -u /redir_external -t 5"; eval { $result = NPTest->testCmd( $cmd, 2 ); -- cgit v0.10-9-g596f From a739a5614834178ba88d04972b4f4ba9c560e1df Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 6 May 2017 16:36:16 +0200 Subject: some rework: - added old style 'redir' function and options along to a new libcurl internal 'follow' parameter 'curl' - moved picohttpparser to it's own subdirectory - added uriparser to be used instead of the home-grown parser in 'redir' diff --git a/.gitignore b/.gitignore index b238aef..df863c7 100644 --- a/.gitignore +++ b/.gitignore @@ -202,7 +202,18 @@ NP-VERSION-FILE /plugins/negate /plugins/stamp-h* /plugins/urlize -/plugins/libpicohttpparser.a + +# /plugins/picohttpparser +/plugins/picohttpparser/Makefile +/plugins/picohttpparser/Makefile.in +/plugins/picohttpparser/.deps +/plugins/picohttpparser/libpicohttpparser.a + +# /plugins/uriparser +/plugins/uriparser/Makefile +/plugins/uriparser/Makefile.in +/plugins/uriparser/.deps +/plugins/uriparser/liburiparser.a # /plugins/t/ /plugins/t/*.tmp diff --git a/ACKNOWLEDGEMENTS b/ACKNOWLEDGEMENTS index 50c714c..06e84e2 100644 --- a/ACKNOWLEDGEMENTS +++ b/ACKNOWLEDGEMENTS @@ -31,3 +31,16 @@ Gnulib team Copyright (C) 2001, 2003, 2004, 2006 Free Software Foundation, Inc http://www.gnu.org/software/gnulib/ Use of lib files that originally were used from coreutils + +Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, + Shigeo Mitsunari +picohttpparser +https://github.com/h2o/picohttpparser +Use of the library for HTTP header parsing in check_curl. + +Copyright (C) 2007, Weijia Song +Copyright (C) 2007, Sebastian Pipping +All rights reserved. +uriparser - RFC 3986 URI parsing library +http://uriparser.sourceforge.net/ +Use of the library for URL parsing in check_curl. diff --git a/configure.ac b/configure.ac index 04ec5bd..c56163c 100644 --- a/configure.ac +++ b/configure.ac @@ -385,19 +385,31 @@ if test "$ac_cv_header_wtsapi32_h" = "yes"; then AC_SUBST(WTSAPI32LIBS) fi -dnl Check for cURL library -LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ - EXTRAS="$EXTRAS check_curl\$(EXEEXT)" - LIBCURLINCLUDE="$LIBCURL_CPPFLAGS" - LIBCURLLIBS="$LIBCURL" - LIBCURLCFLAGS="$LIBCURL_CPPFLAGS" - AC_SUBST(LIBCURLINCLUDE) - AC_SUBST(LIBCURLLIBS) - AC_SUBST(LIBCURLCFLAGS) -], [ - AC_MSG_WARN([Skipping curl plugin]) - AC_MSG_WARN([install libcurl libs to compile this plugin (see REQUIREMENTS).]) -]) +AC_ARG_ENABLE(check-curl, + AC_HELP_STRING([--enable-check-curl], + [Enables compilation of check_curl (default: no)]), + [enable_check_curl=$enableval], + [enable_check_curl=no]) +if test "$enable_check_curl" = "yes" ; then + dnl Check for cURL library + LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ + EXTRAS="$EXTRAS check_curl\$(EXEEXT)" + LIBCURLINCLUDE="$LIBCURL_CPPFLAGS" + LIBCURLLIBS="$LIBCURL" + LIBCURLCFLAGS="$LIBCURL_CPPFLAGS" + AC_SUBST(LIBCURLINCLUDE) + AC_SUBST(LIBCURLLIBS) + AC_SUBST(LIBCURLCFLAGS) + AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) + AC_SUBST(URIPARSER_DIR, uriparser) + ], [ + AC_MSG_WARN([Skipping curl plugin]) + AC_MSG_WARN([install libcurl libs to compile this plugin (see REQUIREMENTS).]) + ]) +fi +AM_CONDITIONAL([WITH_CHECK_CURL], [test "$enable_check_curl" = "yes"]) +AM_COND_IF([WITH_CHECK_CURL], + [AC_CONFIG_FILES([plugins/picohttpparser/Makefile plugins/uriparser/Makefile])]) dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface if test "$ac_cv_header_utmpx_h" = "no" -a "$ac_cv_header_wtsapi32_h" = "no" diff --git a/plugins/Makefile.am b/plugins/Makefile.am index ff745c3..34a7da8 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -40,17 +40,17 @@ EXTRA_PROGRAMS = check_mysql check_radius check_pgsql check_snmp check_hpjd \ check_nagios check_by_ssh check_dns check_nt check_ide_smart \ check_procs check_mysql_query check_apt check_dbi check_curl +SUBDIRS = @PICOHTTPPARSER_DIR@ @URIPARSER_DIR@ + EXTRA_DIST = t tests PLUGINHDRS = common.h -noinst_LIBRARIES = libnpcommon.a libpicohttpparser.a +noinst_LIBRARIES = libnpcommon.a libnpcommon_a_SOURCES = utils.c netutils.c sslutils.c runcmd.c \ popen.c utils.h netutils.h popen.h common.h runcmd.c runcmd.h -libpicohttpparser_a_SOURCES = picohttpparser.c - BASEOBJS = libnpcommon.a ../lib/libmonitoringplug.a ../gl/libgnu.a NETOBJS = $(BASEOBJS) $(EXTRA_NETOBLS) NETLIBS = $(NETOBJS) $(SOCKETLIBS) @@ -71,9 +71,9 @@ test-debug: check_apt_LDADD = $(BASEOBJS) check_cluster_LDADD = $(BASEOBJS) -check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) -check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) -check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) libpicohttpparser.a +check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) -Ipicohttpparser -Iuriparser +check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) -Ipicohttpparser -Iuriparser +check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) picohttpparser/libpicohttpparser.a uriparser/liburiparser.a check_dbi_LDADD = $(NETLIBS) $(DBILIBS) check_dig_LDADD = $(NETLIBS) check_disk_LDADD = $(BASEOBJS) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 5f6905f..72db27a 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -51,17 +51,35 @@ const char *email = "devel@monitoring-plugins.org"; #include "picohttpparser.h" +#include "uriparser/Uri.h" + +#include + #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) #define DEFAULT_BUFFER_SIZE 2048 #define DEFAULT_SERVER_URL "/" #define HTTP_EXPECT "HTTP/1." +#define DEFAULT_MAX_REDIRS 15 +#define INET_ADDR_MAX_SIZE INET6_ADDRSTRLEN enum { + MAX_IPV4_HOSTLENGTH = 255, HTTP_PORT = 80, HTTPS_PORT = 443, MAX_PORT = 65535 }; +enum { + STICKY_NONE = 0, + STICKY_HOST = 1, + STICKY_PORT = 2 +}; + +enum { + FOLLOW_HTTP_CURL = 0, + FOLLOW_LIBCURL = 1 +}; + /* for buffers for header and body */ typedef struct { char *buf; @@ -128,6 +146,8 @@ int verbose = 0; int show_extended_perfdata = FALSE; int min_page_len = 0; int max_page_len = 0; +int redir_depth = 0; +int max_depth = DEFAULT_MAX_REDIRS; char *http_method = NULL; char *http_post_data = NULL; char *http_content_type = NULL; @@ -155,8 +175,12 @@ char string_expect[MAX_INPUT_BUFFER] = ""; char server_expect[MAX_INPUT_BUFFER] = HTTP_EXPECT; int server_expect_yn = 0; char user_auth[MAX_INPUT_BUFFER] = ""; +char **http_opt_headers; +int http_opt_headers_count = 0; int display_html = FALSE; int onredirect = STATE_OK; +int followmethod = FOLLOW_HTTP_CURL; +int followsticky = STICKY_NONE; int use_ssl = FALSE; int use_sni = TRUE; int check_cert = FALSE; @@ -181,6 +205,7 @@ curlhelp_ssl_library ssl_library = CURLHELP_SSL_LIBRARY_UNKNOWN; int process_arguments (int, char**); void handle_curl_option_return_code (CURLcode res, const char* option); int check_http (void); +void redir (curlhelp_write_curlbuf*); void print_help (void); void print_usage (void); void print_curl_version (void); @@ -295,6 +320,8 @@ check_http (void) { int result = STATE_OK; int page_len = 0; + int i; + char *force_host_header = NULL; /* initialize curl */ if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) @@ -371,6 +398,28 @@ check_http (void) snprintf (http_header, DEFAULT_BUFFER_SIZE, "Connection: close"); header_list = curl_slist_append (header_list, http_header); + /* check if Host header is explicitly set in options */ + if (http_opt_headers_count) { + for (i = 0; i < http_opt_headers_count ; i++) { + if (strncmp(http_opt_headers[i], "Host:", 5) == 0) { + force_host_header = http_opt_headers[i]; + } + } + } + + /* attach additional headers supplied by the user */ + /* optionally send any other header tag */ + if (http_opt_headers_count) { + for (i = 0; i < http_opt_headers_count ; i++) { + if (force_host_header != http_opt_headers[i]) { + header_list = curl_slist_append (header_list, http_opt_headers[i]); + } + } + /* This cannot be free'd here because a redirection will then try to access this and segfault */ + /* Covered in a testcase in tests/check_http.t */ + /* free(http_opt_headers); */ + } + /* set HTTP headers */ handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_HTTPHEADER, header_list ), "CURLOPT_HTTPHEADER"); @@ -481,13 +530,29 @@ check_http (void) /* handle redirections */ if (onredirect == STATE_DEPENDENT) { - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1), "CURLOPT_FOLLOWLOCATION"); - /* TODO: handle the following aspects of redirection - CURLOPT_POSTREDIR: method switch - CURLINFO_REDIRECT_URL: custom redirect option - CURLOPT_REDIRECT_PROTOCOLS - CURLINFO_REDIRECT_COUNT - */ + if( followmethod == FOLLOW_LIBCURL ) { + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1), "CURLOPT_FOLLOWLOCATION"); + + /* default -1 is infinite, not good, could lead to zombie plugins! + Setting it to one bigger than maximal limit to handle errors nicely below + */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_MAXREDIRS, max_depth+1), "CURLOPT_MAXREDIRS"); + + /* for now allow only http and https (we are a http(s) check plugin in the end) */ +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 4) + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_REDIR_PROTOCOLS, CURLPROTO_HTTP | CURLPROTO_HTTPS), "CURLOPT_REDIRECT_PROTOCOLS"); +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 4) */ + + /* TODO: handle the following aspects of redirection, make them + * command line options too later: + CURLOPT_POSTREDIR: method switch + CURLINFO_REDIRECT_URL: custom redirect option + CURLOPT_REDIRECT_PROTOCOLS: allow people to step outside safe protocols + CURLINFO_REDIRECT_COUNT: get the number of redirects, print it, maybe a range option here is nice like for expected page size? + */ + } else { + // old style redirection is handled below + } } /* no-body */ @@ -533,8 +598,8 @@ check_http (void) printf ("**** REQUEST CONTENT ****\n%s\n", http_post_data); /* free header and server IP resolve lists, we don't need it anymore */ - curl_slist_free_all (header_list); - curl_slist_free_all (server_ips); + curl_slist_free_all (header_list); header_list = NULL; + curl_slist_free_all (server_ips); server_ips = NULL; /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { @@ -691,18 +756,39 @@ GOT_FIRST_CERT: /* check redirected page if specified */ } else if (code >= 300) { if (onredirect == STATE_DEPENDENT) { - code = status_line.http_code; + if( followmethod == FOLLOW_LIBCURL ) { + code = status_line.http_code; + } else { + /* old check_http style redirection, if we come + * back here, we are in the same status as with + * the libcurl method + */ + redir (&header_buf); + } + } else { + /* this is a specific code in the command line to + * be returned when a redirection is encoutered + */ } result = max_state_alt (onredirect, result); - /* TODO: make sure the last status line has been - parsed into the status_line structure - */ /* all other codes are considered ok */ } else { result = STATE_OK; } } + /* libcurl redirection internally, handle error states here */ + if( followmethod == FOLLOW_LIBCURL ) { + handle_curl_option_return_code (curl_easy_getinfo (curl, CURLINFO_REDIRECT_COUNT, &redir_depth), "CURLINFO_REDIRECT_COUNT"); + if (verbose >= 2) + printf(_("* curl LIBINFO_REDIRECT_COUNT is %d\n"), redir_depth); + if (redir_depth > max_depth) { + snprintf (msg, DEFAULT_BUFFER_SIZE, "maximum redirection depth %d exceeded in libcurl", + max_depth); + die (STATE_WARNING, "HTTP WARNING - %s", msg); + } + } + /* check status codes, set exit status accordingly */ if( status_line.http_code != code ) { die (STATE_CRITICAL, _("HTTP CRITICAL HTTP/%d.%d %d %s - different HTTP codes (cUrl has %ld)\n"), @@ -813,6 +899,188 @@ GOT_FIRST_CERT: return result; } +int +uri_strcmp (const UriTextRangeA range, const char* s) +{ + if (!range.first) return -1; + if (range.afterLast - range.first < strlen (s)) return -1; + return strncmp (s, range.first, min( range.afterLast - range.first, strlen (s))); +} + +char* +uri_string (const UriTextRangeA range, char* buf, size_t buflen) +{ + if (!range.first) return "(null)"; + strncpy (buf, range.first, max (buflen, range.afterLast - range.first)); + buf[max (buflen, range.afterLast - range.first)] = '\0'; + buf[range.afterLast - range.first] = '\0'; + return buf; +} + +void +redir (curlhelp_write_curlbuf* header_buf) +{ + char *location = NULL; + curlhelp_statusline status_line; + struct phr_header headers[255]; + size_t nof_headers = 255; + size_t msglen; + char buf[DEFAULT_BUFFER_SIZE]; + char ipstr[INET_ADDR_MAX_SIZE]; + int new_port; + char *new_host; + char *new_url; + + int res = phr_parse_response (header_buf->buf, header_buf->buflen, + &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, + headers, &nof_headers, 0); + + location = get_header_value (headers, nof_headers, "location"); + + if (verbose >= 2) + printf(_("* Seen redirect location %s\n"), location); + + if (++redir_depth > max_depth) + die (STATE_WARNING, + _("HTTP WARNING - maximum redirection depth %d exceeded - %s\n"), + max_depth, location, (display_html ? "" : "")); + + UriParserStateA state; + UriUriA uri; + state.uri = &uri; + if (uriParseUriA (&state, location) != URI_SUCCESS) { + if (state.errorCode == URI_ERROR_SYNTAX) { + die (STATE_UNKNOWN, + _("HTTP UNKNOWN - Could not parse redirect location '%s'%s\n"), + location, (display_html ? "" : "")); + } else if (state.errorCode == URI_ERROR_MALLOC) { + die (STATE_UNKNOWN, _("HTTP UNKNOWN - Could not allocate URL\n")); + } + } + + if (verbose >= 2) { + printf (_("** scheme: %s\n"), + uri_string (uri.scheme, buf, DEFAULT_BUFFER_SIZE)); + printf (_("** host: %s\n"), + uri_string (uri.hostText, buf, DEFAULT_BUFFER_SIZE)); + printf (_("** port: %s\n"), + uri_string (uri.portText, buf, DEFAULT_BUFFER_SIZE)); + if (uri.hostData.ip4) { + inet_ntop (AF_INET, uri.hostData.ip4->data, ipstr, sizeof (ipstr)); + printf (_("** IPv4: %s\n"), ipstr); + } + if (uri.hostData.ip6) { + inet_ntop (AF_INET, uri.hostData.ip6->data, ipstr, sizeof (ipstr)); + printf (_("** IPv6: %s\n"), ipstr); + } + if (uri.pathHead) { + printf (_("** path: ")); + const UriPathSegmentA* p = uri.pathHead; + for (; p; p = p->next) { + printf ("/%s", uri_string (p->text, buf, DEFAULT_BUFFER_SIZE)); + } + puts (""); + } + if (uri.query.first) { + printf (_("** query: %s\n"), + uri_string (uri.query, buf, DEFAULT_BUFFER_SIZE)); + } + if (uri.fragment.first) { + printf (_("** fragment: %s\n"), + uri_string (uri.fragment, buf, DEFAULT_BUFFER_SIZE)); + } + } + + use_ssl = !uri_strcmp (uri.scheme, "https"); + + /* we do a sloppy test here only, because uriparser would have failed + * above, if the port would be invalid, we just check for MAX_PORT + */ + if (uri.portText.first) { + new_port = atoi (uri_string (uri.portText, buf, DEFAULT_BUFFER_SIZE)); + } else { + new_port = HTTP_PORT; + if (use_ssl) + new_port = HTTPS_PORT; + } + if (new_port > MAX_PORT) + die (STATE_UNKNOWN, + _("HTTP UNKNOWN - Redirection to port above %d - %s\n"), + MAX_PORT, location, display_html ? "" : ""); + + /* by RFC 7231 relative URLs in Location should be taken relative to + * the original URL, so wy try to form a new absolute URL here + */ + if (!uri.scheme.first && !uri.hostText.first) { + /* TODO: implement */ + die (STATE_UNKNOWN, _("HTTP UNKNOWN - non-absolute location, not implemented yet!\n")); + new_host = strdup (host_name ? host_name : server_address); + } else { + new_host = strdup (uri_string (uri.hostText, buf, DEFAULT_BUFFER_SIZE)); + } + + new_url = (char *)calloc( 1, DEFAULT_BUFFER_SIZE); + if (uri.pathHead) { + const UriPathSegmentA* p = uri.pathHead; + for (; p; p = p->next) { + strncat (new_url, "/", DEFAULT_BUFFER_SIZE); + strncat (new_url, uri_string (p->text, buf, DEFAULT_BUFFER_SIZE), DEFAULT_BUFFER_SIZE); + } + } + + if (server_port==new_port && + !strncmp(server_address, new_host, MAX_IPV4_HOSTLENGTH) && + (host_name && !strncmp(host_name, new_host, MAX_IPV4_HOSTLENGTH)) && + !strcmp(server_url, new_url)) + die (STATE_WARNING, + _("HTTP WARNING - redirection creates an infinite loop - %s://%s:%d%s%s\n"), + use_ssl ? "https" : "http", new_host, new_port, new_url, (display_html ? "" : "")); + + /* set new values for redirected request */ + + free (host_name); + host_name = strndup (new_host, MAX_IPV4_HOSTLENGTH); + free(new_host); + + server_port = (unsigned short)new_port; + + /* reset virtual port */ + virtual_port = server_port; + + if (!(followsticky & STICKY_HOST)) { + free (server_address); + server_address = strndup (new_host, MAX_IPV4_HOSTLENGTH); + } + if (!(followsticky & STICKY_PORT)) { + server_port = new_port; + } + + free (server_url); + server_url = new_url; + + uriFreeUriMembersA (&uri); + + if (verbose) + printf (_("Redirection to %s://%s:%d%s\n"), use_ssl ? "https" : "http", + host_name ? host_name : server_address, server_port, server_url); + + /* TODO: the hash component MUST be taken from the original URL and + * attached to the URL in Location + */ + + check_http (); +} + +#if 0 + +int main(int argc, char *argv[]) { + + for (; i < argc; i++) { + + } + printf("\n"); +#endif + /* check whether a file exists */ void test_file (char *path) @@ -974,7 +1242,11 @@ process_arguments (int argc, char **argv) snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); break; case 'k': /* Additional headers */ - header_list = curl_slist_append(header_list, optarg); + if (http_opt_headers_count == 0) + http_opt_headers = malloc (sizeof (char *) * (++http_opt_headers_count)); + else + http_opt_headers = realloc (http_opt_headers, sizeof (char *) * (++http_opt_headers_count)); + http_opt_headers[http_opt_headers_count - 1] = optarg; break; case 'L': /* show html link */ display_html = TRUE; @@ -1121,6 +1393,14 @@ process_arguments (int argc, char **argv) onredirect = STATE_UNKNOWN; else if (!strcmp (optarg, "follow")) onredirect = STATE_DEPENDENT; + else if (!strcmp (optarg, "stickyport")) + onredirect = STATE_DEPENDENT, followmethod = FOLLOW_HTTP_CURL, followsticky = STICKY_HOST|STICKY_PORT; + else if (!strcmp (optarg, "sticky")) + onredirect = STATE_DEPENDENT, followmethod = FOLLOW_HTTP_CURL, followsticky = STICKY_HOST; + else if (!strcmp (optarg, "follow")) + onredirect = STATE_DEPENDENT, followmethod = FOLLOW_HTTP_CURL, followsticky = STICKY_NONE; + else if (!strcmp (optarg, "curl")) + onredirect = STATE_DEPENDENT, followmethod = FOLLOW_LIBCURL; else usage2 (_("Invalid onredirect option"), optarg); if (verbose >= 2) printf(_("* Following redirects set to %s\n"), state_text(onredirect)); @@ -1264,7 +1544,6 @@ print_help (void) print_revision (progname, NP_VERSION); printf ("Copyright (c) 1999 Ethan Galstad \n"); - printf ("Copyright (c) 2017 Andreas Baumann \n"); printf (COPYRIGHT, copyright, email); printf ("%s\n", _("This plugin tests the HTTP service on the specified host. It can test")); @@ -1365,8 +1644,11 @@ print_help (void) printf (" %s\n", _("Print additional performance data")); printf (" %s\n", "-L, --link"); printf (" %s\n", _("Wrap output in HTML link (obsoleted by urlize)")); - printf (" %s\n", "-f, --onredirect="); - printf (" %s\n", _("How to handle redirected pages.")); + printf (" %s\n", "-f, --onredirect="); + printf (" %s\n", _("How to handle redirected pages. sticky is like follow but stick to the")); + printf (" %s\n", _("specified IP address. stickyport also ensures port stays the same.")); + printf (" %s\n", _("follow uses the old redirection algorithm of check_http.")); + printf (" %s\n", _("curl uses CURL_FOLLOWLOCATION built into libcurl.")); printf (" %s\n", "-m, --pagesize=INTEGER<:INTEGER>"); printf (" %s\n", _("Minimum page size required (bytes) : Maximum page size required (bytes)")); @@ -1436,7 +1718,7 @@ print_usage (void) printf (" %s -H | -I [-u ] [-p ]\n",progname); printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-L] [-E] [-a auth]\n"); - printf (" [-f ]\n"); + printf (" [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); @@ -1739,7 +2021,7 @@ get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_wri content_length_s += strspn (content_length_s, " \t"); content_length = atoi (content_length_s); if (content_length != body_buf->buflen) { - /* TODO: should we warn if the actual and the reported body length doen't match? */ + /* TODO: should we warn if the actual and the reported body length don't match? */ } if (content_length_s) free (content_length_s); diff --git a/plugins/picohttpparser.c b/plugins/picohttpparser.c deleted file mode 100644 index 6a2d872..0000000 --- a/plugins/picohttpparser.c +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, - * Shigeo Mitsunari - * - * The software is licensed under either the MIT License (below) or the Perl - * license. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - */ - -#include -#include -#include -#ifdef __SSE4_2__ -#ifdef _MSC_VER -#include -#else -#include -#endif -#endif -#include "picohttpparser.h" - -/* $Id: a707070d11d499609f99d09f97535642cec910a8 $ */ - -#if __GNUC__ >= 3 -#define likely(x) __builtin_expect(!!(x), 1) -#define unlikely(x) __builtin_expect(!!(x), 0) -#else -#define likely(x) (x) -#define unlikely(x) (x) -#endif - -#ifdef _MSC_VER -#define ALIGNED(n) _declspec(align(n)) -#else -#define ALIGNED(n) __attribute__((aligned(n))) -#endif - -#define IS_PRINTABLE_ASCII(c) ((unsigned char)(c)-040u < 0137u) - -#define CHECK_EOF() \ - if (buf == buf_end) { \ - *ret = -2; \ - return NULL; \ - } - -#define EXPECT_CHAR_NO_CHECK(ch) \ - if (*buf++ != ch) { \ - *ret = -1; \ - return NULL; \ - } - -#define EXPECT_CHAR(ch) \ - CHECK_EOF(); \ - EXPECT_CHAR_NO_CHECK(ch); - -#define ADVANCE_TOKEN(tok, toklen) \ - do { \ - const char *tok_start = buf; \ - static const char ALIGNED(16) ranges2[] = "\000\040\177\177"; \ - int found2; \ - buf = findchar_fast(buf, buf_end, ranges2, sizeof(ranges2) - 1, &found2); \ - if (!found2) { \ - CHECK_EOF(); \ - } \ - while (1) { \ - if (*buf == ' ') { \ - break; \ - } else if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { \ - if ((unsigned char)*buf < '\040' || *buf == '\177') { \ - *ret = -1; \ - return NULL; \ - } \ - } \ - ++buf; \ - CHECK_EOF(); \ - } \ - tok = tok_start; \ - toklen = buf - tok_start; \ - } while (0) - -static const char *token_char_map = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" - "\0\1\0\1\1\1\1\1\0\0\1\1\0\1\1\0\1\1\1\1\1\1\1\1\1\1\0\0\0\0\0\0" - "\0\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\0\0\1\1" - "\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\1\0\1\0" - "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" - "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" - "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" - "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; - -static const char *findchar_fast(const char *buf, const char *buf_end, const char *ranges, size_t ranges_size, int *found) -{ - *found = 0; -#if __SSE4_2__ - if (likely(buf_end - buf >= 16)) { - __m128i ranges16 = _mm_loadu_si128((const __m128i *)ranges); - - size_t left = (buf_end - buf) & ~15; - do { - __m128i b16 = _mm_loadu_si128((const __m128i *)buf); - int r = _mm_cmpestri(ranges16, ranges_size, b16, 16, _SIDD_LEAST_SIGNIFICANT | _SIDD_CMP_RANGES | _SIDD_UBYTE_OPS); - if (unlikely(r != 16)) { - buf += r; - *found = 1; - break; - } - buf += 16; - left -= 16; - } while (likely(left != 0)); - } -#else - /* suppress unused parameter warning */ - (void)buf_end; - (void)ranges; - (void)ranges_size; -#endif - return buf; -} - -static const char *get_token_to_eol(const char *buf, const char *buf_end, const char **token, size_t *token_len, int *ret) -{ - const char *token_start = buf; - -#ifdef __SSE4_2__ - static const char ranges1[] = "\0\010" - /* allow HT */ - "\012\037" - /* allow SP and up to but not including DEL */ - "\177\177" - /* allow chars w. MSB set */ - ; - int found; - buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); - if (found) - goto FOUND_CTL; -#else - /* find non-printable char within the next 8 bytes, this is the hottest code; manually inlined */ - while (likely(buf_end - buf >= 8)) { -#define DOIT() \ - do { \ - if (unlikely(!IS_PRINTABLE_ASCII(*buf))) \ - goto NonPrintable; \ - ++buf; \ - } while (0) - DOIT(); - DOIT(); - DOIT(); - DOIT(); - DOIT(); - DOIT(); - DOIT(); - DOIT(); -#undef DOIT - continue; - NonPrintable: - if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { - goto FOUND_CTL; - } - ++buf; - } -#endif - for (;; ++buf) { - CHECK_EOF(); - if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { - if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { - goto FOUND_CTL; - } - } - } -FOUND_CTL: - if (likely(*buf == '\015')) { - ++buf; - EXPECT_CHAR('\012'); - *token_len = buf - 2 - token_start; - } else if (*buf == '\012') { - *token_len = buf - token_start; - ++buf; - } else { - *ret = -1; - return NULL; - } - *token = token_start; - - return buf; -} - -static const char *is_complete(const char *buf, const char *buf_end, size_t last_len, int *ret) -{ - int ret_cnt = 0; - buf = last_len < 3 ? buf : buf + last_len - 3; - - while (1) { - CHECK_EOF(); - if (*buf == '\015') { - ++buf; - CHECK_EOF(); - EXPECT_CHAR('\012'); - ++ret_cnt; - } else if (*buf == '\012') { - ++buf; - ++ret_cnt; - } else { - ++buf; - ret_cnt = 0; - } - if (ret_cnt == 2) { - return buf; - } - } - - *ret = -2; - return NULL; -} - -#define PARSE_INT(valp_, mul_) \ - if (*buf < '0' || '9' < *buf) { \ - buf++; \ - *ret = -1; \ - return NULL; \ - } \ - *(valp_) = (mul_) * (*buf++ - '0'); - -#define PARSE_INT_3(valp_) \ - do { \ - int res_ = 0; \ - PARSE_INT(&res_, 100) \ - *valp_ = res_; \ - PARSE_INT(&res_, 10) \ - *valp_ += res_; \ - PARSE_INT(&res_, 1) \ - *valp_ += res_; \ - } while (0) - -/* returned pointer is always within [buf, buf_end), or null */ -static const char *parse_http_version(const char *buf, const char *buf_end, int *minor_version, int *ret) -{ - /* we want at least [HTTP/1.] to try to parse */ - if (buf_end - buf < 9) { - *ret = -2; - return NULL; - } - EXPECT_CHAR_NO_CHECK('H'); - EXPECT_CHAR_NO_CHECK('T'); - EXPECT_CHAR_NO_CHECK('T'); - EXPECT_CHAR_NO_CHECK('P'); - EXPECT_CHAR_NO_CHECK('/'); - EXPECT_CHAR_NO_CHECK('1'); - EXPECT_CHAR_NO_CHECK('.'); - PARSE_INT(minor_version, 1); - return buf; -} - -static const char *parse_headers(const char *buf, const char *buf_end, struct phr_header *headers, size_t *num_headers, - size_t max_headers, int *ret) -{ - for (;; ++*num_headers) { - CHECK_EOF(); - if (*buf == '\015') { - ++buf; - EXPECT_CHAR('\012'); - break; - } else if (*buf == '\012') { - ++buf; - break; - } - if (*num_headers == max_headers) { - *ret = -1; - return NULL; - } - if (!(*num_headers != 0 && (*buf == ' ' || *buf == '\t'))) { - /* parsing name, but do not discard SP before colon, see - * http://www.mozilla.org/security/announce/2006/mfsa2006-33.html */ - headers[*num_headers].name = buf; - static const char ALIGNED(16) ranges1[] = "\x00 " /* control chars and up to SP */ - "\"\"" /* 0x22 */ - "()" /* 0x28,0x29 */ - ",," /* 0x2c */ - "//" /* 0x2f */ - ":@" /* 0x3a-0x40 */ - "[]" /* 0x5b-0x5d */ - "{\377"; /* 0x7b-0xff */ - int found; - buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); - if (!found) { - CHECK_EOF(); - } - while (1) { - if (*buf == ':') { - break; - } else if (!token_char_map[(unsigned char)*buf]) { - *ret = -1; - return NULL; - } - ++buf; - CHECK_EOF(); - } - if ((headers[*num_headers].name_len = buf - headers[*num_headers].name) == 0) { - *ret = -1; - return NULL; - } - ++buf; - for (;; ++buf) { - CHECK_EOF(); - if (!(*buf == ' ' || *buf == '\t')) { - break; - } - } - } else { - headers[*num_headers].name = NULL; - headers[*num_headers].name_len = 0; - } - if ((buf = get_token_to_eol(buf, buf_end, &headers[*num_headers].value, &headers[*num_headers].value_len, ret)) == NULL) { - return NULL; - } - } - return buf; -} - -static const char *parse_request(const char *buf, const char *buf_end, const char **method, size_t *method_len, const char **path, - size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, - size_t max_headers, int *ret) -{ - /* skip first empty line (some clients add CRLF after POST content) */ - CHECK_EOF(); - if (*buf == '\015') { - ++buf; - EXPECT_CHAR('\012'); - } else if (*buf == '\012') { - ++buf; - } - - /* parse request line */ - ADVANCE_TOKEN(*method, *method_len); - ++buf; - ADVANCE_TOKEN(*path, *path_len); - ++buf; - if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { - return NULL; - } - if (*buf == '\015') { - ++buf; - EXPECT_CHAR('\012'); - } else if (*buf == '\012') { - ++buf; - } else { - *ret = -1; - return NULL; - } - - return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); -} - -int phr_parse_request(const char *buf_start, size_t len, const char **method, size_t *method_len, const char **path, - size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len) -{ - const char *buf = buf_start, *buf_end = buf_start + len; - size_t max_headers = *num_headers; - int r; - - *method = NULL; - *method_len = 0; - *path = NULL; - *path_len = 0; - *minor_version = -1; - *num_headers = 0; - - /* if last_len != 0, check if the request is complete (a fast countermeasure - againt slowloris */ - if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { - return r; - } - - if ((buf = parse_request(buf, buf_end, method, method_len, path, path_len, minor_version, headers, num_headers, max_headers, - &r)) == NULL) { - return r; - } - - return (int)(buf - buf_start); -} - -static const char *parse_response(const char *buf, const char *buf_end, int *minor_version, int *status, const char **msg, - size_t *msg_len, struct phr_header *headers, size_t *num_headers, size_t max_headers, int *ret) -{ - /* parse "HTTP/1.x" */ - if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { - return NULL; - } - /* skip space */ - if (*buf++ != ' ') { - *ret = -1; - return NULL; - } - /* parse status code, we want at least [:digit:][:digit:][:digit:] to try to parse */ - if (buf_end - buf < 4) { - *ret = -2; - return NULL; - } - PARSE_INT_3(status); - - /* skip space */ - if (*buf++ != ' ') { - *ret = -1; - return NULL; - } - /* get message */ - if ((buf = get_token_to_eol(buf, buf_end, msg, msg_len, ret)) == NULL) { - return NULL; - } - - return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); -} - -int phr_parse_response(const char *buf_start, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, - struct phr_header *headers, size_t *num_headers, size_t last_len) -{ - const char *buf = buf_start, *buf_end = buf + len; - size_t max_headers = *num_headers; - int r; - - *minor_version = -1; - *status = 0; - *msg = NULL; - *msg_len = 0; - *num_headers = 0; - - /* if last_len != 0, check if the response is complete (a fast countermeasure - against slowloris */ - if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { - return r; - } - - if ((buf = parse_response(buf, buf_end, minor_version, status, msg, msg_len, headers, num_headers, max_headers, &r)) == NULL) { - return r; - } - - return (int)(buf - buf_start); -} - -int phr_parse_headers(const char *buf_start, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len) -{ - const char *buf = buf_start, *buf_end = buf + len; - size_t max_headers = *num_headers; - int r; - - *num_headers = 0; - - /* if last_len != 0, check if the response is complete (a fast countermeasure - against slowloris */ - if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { - return r; - } - - if ((buf = parse_headers(buf, buf_end, headers, num_headers, max_headers, &r)) == NULL) { - return r; - } - - return (int)(buf - buf_start); -} - -enum { - CHUNKED_IN_CHUNK_SIZE, - CHUNKED_IN_CHUNK_EXT, - CHUNKED_IN_CHUNK_DATA, - CHUNKED_IN_CHUNK_CRLF, - CHUNKED_IN_TRAILERS_LINE_HEAD, - CHUNKED_IN_TRAILERS_LINE_MIDDLE -}; - -static int decode_hex(int ch) -{ - if ('0' <= ch && ch <= '9') { - return ch - '0'; - } else if ('A' <= ch && ch <= 'F') { - return ch - 'A' + 0xa; - } else if ('a' <= ch && ch <= 'f') { - return ch - 'a' + 0xa; - } else { - return -1; - } -} - -ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *_bufsz) -{ - size_t dst = 0, src = 0, bufsz = *_bufsz; - ssize_t ret = -2; /* incomplete */ - - while (1) { - switch (decoder->_state) { - case CHUNKED_IN_CHUNK_SIZE: - for (;; ++src) { - int v; - if (src == bufsz) - goto Exit; - if ((v = decode_hex(buf[src])) == -1) { - if (decoder->_hex_count == 0) { - ret = -1; - goto Exit; - } - break; - } - if (decoder->_hex_count == sizeof(size_t) * 2) { - ret = -1; - goto Exit; - } - decoder->bytes_left_in_chunk = decoder->bytes_left_in_chunk * 16 + v; - ++decoder->_hex_count; - } - decoder->_hex_count = 0; - decoder->_state = CHUNKED_IN_CHUNK_EXT; - /* fallthru */ - case CHUNKED_IN_CHUNK_EXT: - /* RFC 7230 A.2 "Line folding in chunk extensions is disallowed" */ - for (;; ++src) { - if (src == bufsz) - goto Exit; - if (buf[src] == '\012') - break; - } - ++src; - if (decoder->bytes_left_in_chunk == 0) { - if (decoder->consume_trailer) { - decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; - break; - } else { - goto Complete; - } - } - decoder->_state = CHUNKED_IN_CHUNK_DATA; - /* fallthru */ - case CHUNKED_IN_CHUNK_DATA: { - size_t avail = bufsz - src; - if (avail < decoder->bytes_left_in_chunk) { - if (dst != src) - memmove(buf + dst, buf + src, avail); - src += avail; - dst += avail; - decoder->bytes_left_in_chunk -= avail; - goto Exit; - } - if (dst != src) - memmove(buf + dst, buf + src, decoder->bytes_left_in_chunk); - src += decoder->bytes_left_in_chunk; - dst += decoder->bytes_left_in_chunk; - decoder->bytes_left_in_chunk = 0; - decoder->_state = CHUNKED_IN_CHUNK_CRLF; - } - /* fallthru */ - case CHUNKED_IN_CHUNK_CRLF: - for (;; ++src) { - if (src == bufsz) - goto Exit; - if (buf[src] != '\015') - break; - } - if (buf[src] != '\012') { - ret = -1; - goto Exit; - } - ++src; - decoder->_state = CHUNKED_IN_CHUNK_SIZE; - break; - case CHUNKED_IN_TRAILERS_LINE_HEAD: - for (;; ++src) { - if (src == bufsz) - goto Exit; - if (buf[src] != '\015') - break; - } - if (buf[src++] == '\012') - goto Complete; - decoder->_state = CHUNKED_IN_TRAILERS_LINE_MIDDLE; - /* fallthru */ - case CHUNKED_IN_TRAILERS_LINE_MIDDLE: - for (;; ++src) { - if (src == bufsz) - goto Exit; - if (buf[src] == '\012') - break; - } - ++src; - decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; - break; - default: - assert(!"decoder is corrupt"); - } - } - -Complete: - ret = bufsz - src; -Exit: - if (dst != src) - memmove(buf + dst, buf + src, bufsz - src); - *_bufsz = dst; - return ret; -} - -int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder) -{ - return decoder->_state == CHUNKED_IN_CHUNK_DATA; -} - -#undef CHECK_EOF -#undef EXPECT_CHAR -#undef ADVANCE_TOKEN diff --git a/plugins/picohttpparser.h b/plugins/picohttpparser.h deleted file mode 100644 index a8fad71..0000000 --- a/plugins/picohttpparser.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, - * Shigeo Mitsunari - * - * The software is licensed under either the MIT License (below) or the Perl - * license. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - */ - -#ifndef picohttpparser_h -#define picohttpparser_h - -#include - -#ifdef _MSC_VER -#define ssize_t intptr_t -#endif - -/* $Id: 67fd3ee74103ada60258d8a16e868f483abcca87 $ */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* contains name and value of a header (name == NULL if is a continuing line - * of a multiline header */ -struct phr_header { - const char *name; - size_t name_len; - const char *value; - size_t value_len; -}; - -/* returns number of bytes consumed if successful, -2 if request is partial, - * -1 if failed */ -int phr_parse_request(const char *buf, size_t len, const char **method, size_t *method_len, const char **path, size_t *path_len, - int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len); - -/* ditto */ -int phr_parse_response(const char *_buf, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, - struct phr_header *headers, size_t *num_headers, size_t last_len); - -/* ditto */ -int phr_parse_headers(const char *buf, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len); - -/* should be zero-filled before start */ -struct phr_chunked_decoder { - size_t bytes_left_in_chunk; /* number of bytes left in current chunk */ - char consume_trailer; /* if trailing headers should be consumed */ - char _hex_count; - char _state; -}; - -/* the function rewrites the buffer given as (buf, bufsz) removing the chunked- - * encoding headers. When the function returns without an error, bufsz is - * updated to the length of the decoded data available. Applications should - * repeatedly call the function while it returns -2 (incomplete) every time - * supplying newly arrived data. If the end of the chunked-encoded data is - * found, the function returns a non-negative number indicating the number of - * octets left undecoded at the tail of the supplied buffer. Returns -1 on - * error. - */ -ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *bufsz); - -/* returns if the chunked decoder is in middle of chunked data */ -int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/plugins/picohttpparser/Makefile.am b/plugins/picohttpparser/Makefile.am new file mode 100644 index 0000000..5a61027 --- /dev/null +++ b/plugins/picohttpparser/Makefile.am @@ -0,0 +1,3 @@ +noinst_LIBRARIES = libpicohttpparser.a + +libpicohttpparser_a_SOURCES = picohttpparser.c diff --git a/plugins/picohttpparser/picohttpparser.c b/plugins/picohttpparser/picohttpparser.c new file mode 100644 index 0000000..6a2d872 --- /dev/null +++ b/plugins/picohttpparser/picohttpparser.c @@ -0,0 +1,620 @@ +/* + * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, + * Shigeo Mitsunari + * + * The software is licensed under either the MIT License (below) or the Perl + * license. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include +#include +#include +#ifdef __SSE4_2__ +#ifdef _MSC_VER +#include +#else +#include +#endif +#endif +#include "picohttpparser.h" + +/* $Id: a707070d11d499609f99d09f97535642cec910a8 $ */ + +#if __GNUC__ >= 3 +#define likely(x) __builtin_expect(!!(x), 1) +#define unlikely(x) __builtin_expect(!!(x), 0) +#else +#define likely(x) (x) +#define unlikely(x) (x) +#endif + +#ifdef _MSC_VER +#define ALIGNED(n) _declspec(align(n)) +#else +#define ALIGNED(n) __attribute__((aligned(n))) +#endif + +#define IS_PRINTABLE_ASCII(c) ((unsigned char)(c)-040u < 0137u) + +#define CHECK_EOF() \ + if (buf == buf_end) { \ + *ret = -2; \ + return NULL; \ + } + +#define EXPECT_CHAR_NO_CHECK(ch) \ + if (*buf++ != ch) { \ + *ret = -1; \ + return NULL; \ + } + +#define EXPECT_CHAR(ch) \ + CHECK_EOF(); \ + EXPECT_CHAR_NO_CHECK(ch); + +#define ADVANCE_TOKEN(tok, toklen) \ + do { \ + const char *tok_start = buf; \ + static const char ALIGNED(16) ranges2[] = "\000\040\177\177"; \ + int found2; \ + buf = findchar_fast(buf, buf_end, ranges2, sizeof(ranges2) - 1, &found2); \ + if (!found2) { \ + CHECK_EOF(); \ + } \ + while (1) { \ + if (*buf == ' ') { \ + break; \ + } else if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { \ + if ((unsigned char)*buf < '\040' || *buf == '\177') { \ + *ret = -1; \ + return NULL; \ + } \ + } \ + ++buf; \ + CHECK_EOF(); \ + } \ + tok = tok_start; \ + toklen = buf - tok_start; \ + } while (0) + +static const char *token_char_map = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\1\0\1\1\1\1\1\0\0\1\1\0\1\1\0\1\1\1\1\1\1\1\1\1\1\0\0\0\0\0\0" + "\0\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\0\0\1\1" + "\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\0\1\0\1\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; + +static const char *findchar_fast(const char *buf, const char *buf_end, const char *ranges, size_t ranges_size, int *found) +{ + *found = 0; +#if __SSE4_2__ + if (likely(buf_end - buf >= 16)) { + __m128i ranges16 = _mm_loadu_si128((const __m128i *)ranges); + + size_t left = (buf_end - buf) & ~15; + do { + __m128i b16 = _mm_loadu_si128((const __m128i *)buf); + int r = _mm_cmpestri(ranges16, ranges_size, b16, 16, _SIDD_LEAST_SIGNIFICANT | _SIDD_CMP_RANGES | _SIDD_UBYTE_OPS); + if (unlikely(r != 16)) { + buf += r; + *found = 1; + break; + } + buf += 16; + left -= 16; + } while (likely(left != 0)); + } +#else + /* suppress unused parameter warning */ + (void)buf_end; + (void)ranges; + (void)ranges_size; +#endif + return buf; +} + +static const char *get_token_to_eol(const char *buf, const char *buf_end, const char **token, size_t *token_len, int *ret) +{ + const char *token_start = buf; + +#ifdef __SSE4_2__ + static const char ranges1[] = "\0\010" + /* allow HT */ + "\012\037" + /* allow SP and up to but not including DEL */ + "\177\177" + /* allow chars w. MSB set */ + ; + int found; + buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); + if (found) + goto FOUND_CTL; +#else + /* find non-printable char within the next 8 bytes, this is the hottest code; manually inlined */ + while (likely(buf_end - buf >= 8)) { +#define DOIT() \ + do { \ + if (unlikely(!IS_PRINTABLE_ASCII(*buf))) \ + goto NonPrintable; \ + ++buf; \ + } while (0) + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); + DOIT(); +#undef DOIT + continue; + NonPrintable: + if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { + goto FOUND_CTL; + } + ++buf; + } +#endif + for (;; ++buf) { + CHECK_EOF(); + if (unlikely(!IS_PRINTABLE_ASCII(*buf))) { + if ((likely((unsigned char)*buf < '\040') && likely(*buf != '\011')) || unlikely(*buf == '\177')) { + goto FOUND_CTL; + } + } + } +FOUND_CTL: + if (likely(*buf == '\015')) { + ++buf; + EXPECT_CHAR('\012'); + *token_len = buf - 2 - token_start; + } else if (*buf == '\012') { + *token_len = buf - token_start; + ++buf; + } else { + *ret = -1; + return NULL; + } + *token = token_start; + + return buf; +} + +static const char *is_complete(const char *buf, const char *buf_end, size_t last_len, int *ret) +{ + int ret_cnt = 0; + buf = last_len < 3 ? buf : buf + last_len - 3; + + while (1) { + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + CHECK_EOF(); + EXPECT_CHAR('\012'); + ++ret_cnt; + } else if (*buf == '\012') { + ++buf; + ++ret_cnt; + } else { + ++buf; + ret_cnt = 0; + } + if (ret_cnt == 2) { + return buf; + } + } + + *ret = -2; + return NULL; +} + +#define PARSE_INT(valp_, mul_) \ + if (*buf < '0' || '9' < *buf) { \ + buf++; \ + *ret = -1; \ + return NULL; \ + } \ + *(valp_) = (mul_) * (*buf++ - '0'); + +#define PARSE_INT_3(valp_) \ + do { \ + int res_ = 0; \ + PARSE_INT(&res_, 100) \ + *valp_ = res_; \ + PARSE_INT(&res_, 10) \ + *valp_ += res_; \ + PARSE_INT(&res_, 1) \ + *valp_ += res_; \ + } while (0) + +/* returned pointer is always within [buf, buf_end), or null */ +static const char *parse_http_version(const char *buf, const char *buf_end, int *minor_version, int *ret) +{ + /* we want at least [HTTP/1.] to try to parse */ + if (buf_end - buf < 9) { + *ret = -2; + return NULL; + } + EXPECT_CHAR_NO_CHECK('H'); + EXPECT_CHAR_NO_CHECK('T'); + EXPECT_CHAR_NO_CHECK('T'); + EXPECT_CHAR_NO_CHECK('P'); + EXPECT_CHAR_NO_CHECK('/'); + EXPECT_CHAR_NO_CHECK('1'); + EXPECT_CHAR_NO_CHECK('.'); + PARSE_INT(minor_version, 1); + return buf; +} + +static const char *parse_headers(const char *buf, const char *buf_end, struct phr_header *headers, size_t *num_headers, + size_t max_headers, int *ret) +{ + for (;; ++*num_headers) { + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + break; + } else if (*buf == '\012') { + ++buf; + break; + } + if (*num_headers == max_headers) { + *ret = -1; + return NULL; + } + if (!(*num_headers != 0 && (*buf == ' ' || *buf == '\t'))) { + /* parsing name, but do not discard SP before colon, see + * http://www.mozilla.org/security/announce/2006/mfsa2006-33.html */ + headers[*num_headers].name = buf; + static const char ALIGNED(16) ranges1[] = "\x00 " /* control chars and up to SP */ + "\"\"" /* 0x22 */ + "()" /* 0x28,0x29 */ + ",," /* 0x2c */ + "//" /* 0x2f */ + ":@" /* 0x3a-0x40 */ + "[]" /* 0x5b-0x5d */ + "{\377"; /* 0x7b-0xff */ + int found; + buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); + if (!found) { + CHECK_EOF(); + } + while (1) { + if (*buf == ':') { + break; + } else if (!token_char_map[(unsigned char)*buf]) { + *ret = -1; + return NULL; + } + ++buf; + CHECK_EOF(); + } + if ((headers[*num_headers].name_len = buf - headers[*num_headers].name) == 0) { + *ret = -1; + return NULL; + } + ++buf; + for (;; ++buf) { + CHECK_EOF(); + if (!(*buf == ' ' || *buf == '\t')) { + break; + } + } + } else { + headers[*num_headers].name = NULL; + headers[*num_headers].name_len = 0; + } + if ((buf = get_token_to_eol(buf, buf_end, &headers[*num_headers].value, &headers[*num_headers].value_len, ret)) == NULL) { + return NULL; + } + } + return buf; +} + +static const char *parse_request(const char *buf, const char *buf_end, const char **method, size_t *method_len, const char **path, + size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, + size_t max_headers, int *ret) +{ + /* skip first empty line (some clients add CRLF after POST content) */ + CHECK_EOF(); + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + } else if (*buf == '\012') { + ++buf; + } + + /* parse request line */ + ADVANCE_TOKEN(*method, *method_len); + ++buf; + ADVANCE_TOKEN(*path, *path_len); + ++buf; + if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { + return NULL; + } + if (*buf == '\015') { + ++buf; + EXPECT_CHAR('\012'); + } else if (*buf == '\012') { + ++buf; + } else { + *ret = -1; + return NULL; + } + + return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); +} + +int phr_parse_request(const char *buf_start, size_t len, const char **method, size_t *method_len, const char **path, + size_t *path_len, int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf_start + len; + size_t max_headers = *num_headers; + int r; + + *method = NULL; + *method_len = 0; + *path = NULL; + *path_len = 0; + *minor_version = -1; + *num_headers = 0; + + /* if last_len != 0, check if the request is complete (a fast countermeasure + againt slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_request(buf, buf_end, method, method_len, path, path_len, minor_version, headers, num_headers, max_headers, + &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +static const char *parse_response(const char *buf, const char *buf_end, int *minor_version, int *status, const char **msg, + size_t *msg_len, struct phr_header *headers, size_t *num_headers, size_t max_headers, int *ret) +{ + /* parse "HTTP/1.x" */ + if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { + return NULL; + } + /* skip space */ + if (*buf++ != ' ') { + *ret = -1; + return NULL; + } + /* parse status code, we want at least [:digit:][:digit:][:digit:] to try to parse */ + if (buf_end - buf < 4) { + *ret = -2; + return NULL; + } + PARSE_INT_3(status); + + /* skip space */ + if (*buf++ != ' ') { + *ret = -1; + return NULL; + } + /* get message */ + if ((buf = get_token_to_eol(buf, buf_end, msg, msg_len, ret)) == NULL) { + return NULL; + } + + return parse_headers(buf, buf_end, headers, num_headers, max_headers, ret); +} + +int phr_parse_response(const char *buf_start, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, + struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf + len; + size_t max_headers = *num_headers; + int r; + + *minor_version = -1; + *status = 0; + *msg = NULL; + *msg_len = 0; + *num_headers = 0; + + /* if last_len != 0, check if the response is complete (a fast countermeasure + against slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_response(buf, buf_end, minor_version, status, msg, msg_len, headers, num_headers, max_headers, &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +int phr_parse_headers(const char *buf_start, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len) +{ + const char *buf = buf_start, *buf_end = buf + len; + size_t max_headers = *num_headers; + int r; + + *num_headers = 0; + + /* if last_len != 0, check if the response is complete (a fast countermeasure + against slowloris */ + if (last_len != 0 && is_complete(buf, buf_end, last_len, &r) == NULL) { + return r; + } + + if ((buf = parse_headers(buf, buf_end, headers, num_headers, max_headers, &r)) == NULL) { + return r; + } + + return (int)(buf - buf_start); +} + +enum { + CHUNKED_IN_CHUNK_SIZE, + CHUNKED_IN_CHUNK_EXT, + CHUNKED_IN_CHUNK_DATA, + CHUNKED_IN_CHUNK_CRLF, + CHUNKED_IN_TRAILERS_LINE_HEAD, + CHUNKED_IN_TRAILERS_LINE_MIDDLE +}; + +static int decode_hex(int ch) +{ + if ('0' <= ch && ch <= '9') { + return ch - '0'; + } else if ('A' <= ch && ch <= 'F') { + return ch - 'A' + 0xa; + } else if ('a' <= ch && ch <= 'f') { + return ch - 'a' + 0xa; + } else { + return -1; + } +} + +ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *_bufsz) +{ + size_t dst = 0, src = 0, bufsz = *_bufsz; + ssize_t ret = -2; /* incomplete */ + + while (1) { + switch (decoder->_state) { + case CHUNKED_IN_CHUNK_SIZE: + for (;; ++src) { + int v; + if (src == bufsz) + goto Exit; + if ((v = decode_hex(buf[src])) == -1) { + if (decoder->_hex_count == 0) { + ret = -1; + goto Exit; + } + break; + } + if (decoder->_hex_count == sizeof(size_t) * 2) { + ret = -1; + goto Exit; + } + decoder->bytes_left_in_chunk = decoder->bytes_left_in_chunk * 16 + v; + ++decoder->_hex_count; + } + decoder->_hex_count = 0; + decoder->_state = CHUNKED_IN_CHUNK_EXT; + /* fallthru */ + case CHUNKED_IN_CHUNK_EXT: + /* RFC 7230 A.2 "Line folding in chunk extensions is disallowed" */ + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] == '\012') + break; + } + ++src; + if (decoder->bytes_left_in_chunk == 0) { + if (decoder->consume_trailer) { + decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; + break; + } else { + goto Complete; + } + } + decoder->_state = CHUNKED_IN_CHUNK_DATA; + /* fallthru */ + case CHUNKED_IN_CHUNK_DATA: { + size_t avail = bufsz - src; + if (avail < decoder->bytes_left_in_chunk) { + if (dst != src) + memmove(buf + dst, buf + src, avail); + src += avail; + dst += avail; + decoder->bytes_left_in_chunk -= avail; + goto Exit; + } + if (dst != src) + memmove(buf + dst, buf + src, decoder->bytes_left_in_chunk); + src += decoder->bytes_left_in_chunk; + dst += decoder->bytes_left_in_chunk; + decoder->bytes_left_in_chunk = 0; + decoder->_state = CHUNKED_IN_CHUNK_CRLF; + } + /* fallthru */ + case CHUNKED_IN_CHUNK_CRLF: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] != '\015') + break; + } + if (buf[src] != '\012') { + ret = -1; + goto Exit; + } + ++src; + decoder->_state = CHUNKED_IN_CHUNK_SIZE; + break; + case CHUNKED_IN_TRAILERS_LINE_HEAD: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] != '\015') + break; + } + if (buf[src++] == '\012') + goto Complete; + decoder->_state = CHUNKED_IN_TRAILERS_LINE_MIDDLE; + /* fallthru */ + case CHUNKED_IN_TRAILERS_LINE_MIDDLE: + for (;; ++src) { + if (src == bufsz) + goto Exit; + if (buf[src] == '\012') + break; + } + ++src; + decoder->_state = CHUNKED_IN_TRAILERS_LINE_HEAD; + break; + default: + assert(!"decoder is corrupt"); + } + } + +Complete: + ret = bufsz - src; +Exit: + if (dst != src) + memmove(buf + dst, buf + src, bufsz - src); + *_bufsz = dst; + return ret; +} + +int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder) +{ + return decoder->_state == CHUNKED_IN_CHUNK_DATA; +} + +#undef CHECK_EOF +#undef EXPECT_CHAR +#undef ADVANCE_TOKEN diff --git a/plugins/picohttpparser/picohttpparser.h b/plugins/picohttpparser/picohttpparser.h new file mode 100644 index 0000000..a8fad71 --- /dev/null +++ b/plugins/picohttpparser/picohttpparser.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, + * Shigeo Mitsunari + * + * The software is licensed under either the MIT License (below) or the Perl + * license. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef picohttpparser_h +#define picohttpparser_h + +#include + +#ifdef _MSC_VER +#define ssize_t intptr_t +#endif + +/* $Id: 67fd3ee74103ada60258d8a16e868f483abcca87 $ */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* contains name and value of a header (name == NULL if is a continuing line + * of a multiline header */ +struct phr_header { + const char *name; + size_t name_len; + const char *value; + size_t value_len; +}; + +/* returns number of bytes consumed if successful, -2 if request is partial, + * -1 if failed */ +int phr_parse_request(const char *buf, size_t len, const char **method, size_t *method_len, const char **path, size_t *path_len, + int *minor_version, struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* ditto */ +int phr_parse_response(const char *_buf, size_t len, int *minor_version, int *status, const char **msg, size_t *msg_len, + struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* ditto */ +int phr_parse_headers(const char *buf, size_t len, struct phr_header *headers, size_t *num_headers, size_t last_len); + +/* should be zero-filled before start */ +struct phr_chunked_decoder { + size_t bytes_left_in_chunk; /* number of bytes left in current chunk */ + char consume_trailer; /* if trailing headers should be consumed */ + char _hex_count; + char _state; +}; + +/* the function rewrites the buffer given as (buf, bufsz) removing the chunked- + * encoding headers. When the function returns without an error, bufsz is + * updated to the length of the decoded data available. Applications should + * repeatedly call the function while it returns -2 (incomplete) every time + * supplying newly arrived data. If the end of the chunked-encoded data is + * found, the function returns a non-negative number indicating the number of + * octets left undecoded at the tail of the supplied buffer. Returns -1 on + * error. + */ +ssize_t phr_decode_chunked(struct phr_chunked_decoder *decoder, char *buf, size_t *bufsz); + +/* returns if the chunked decoder is in middle of chunked data */ +int phr_decode_chunked_is_in_data(struct phr_chunked_decoder *decoder); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/plugins/uriparser/Makefile.am b/plugins/uriparser/Makefile.am new file mode 100644 index 0000000..592e694 --- /dev/null +++ b/plugins/uriparser/Makefile.am @@ -0,0 +1,9 @@ +noinst_LIBRARIES = liburiparser.a + +liburiparser_a_SOURCES = UriCommon.c UriCompare.c \ + UriEscape.c UriFile.c UriIp4.c \ + UriIp4Base.c UriNormalize.c \ + UriNormalizeBase.c UriParse.c \ + UriParseBase.c UriQuery.c \ + UriRecompose.c UriResolve.c \ + UriShorten.c diff --git a/plugins/uriparser/Uri.h b/plugins/uriparser/Uri.h new file mode 100644 index 0000000..4a18580 --- /dev/null +++ b/plugins/uriparser/Uri.h @@ -0,0 +1,777 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file Uri.h + * Holds the RFC 3986 %URI parser interface. + * NOTE: This header includes itself twice. + */ + +#if (defined(URI_PASS_ANSI) && !defined(URI_H_ANSI)) \ + || (defined(URI_PASS_UNICODE) && !defined(URI_H_UNICODE)) \ + || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* What encodings are enabled? */ +#include "UriDefsConfig.h" +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "Uri.h" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "Uri.h" +# undef URI_PASS_UNICODE +# endif +/* Only one pass for each encoding */ +#elif (defined(URI_PASS_ANSI) && !defined(URI_H_ANSI) \ + && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ + && !defined(URI_H_UNICODE) && defined(URI_ENABLE_UNICODE)) +# ifdef URI_PASS_ANSI +# define URI_H_ANSI 1 +# include "UriDefsAnsi.h" +# else +# define URI_H_UNICODE 1 +# include "UriDefsUnicode.h" +# endif + + + +#ifdef __cplusplus +extern "C" { +#endif + + + +#ifndef URI_DOXYGEN +# include "UriBase.h" +#endif + + + +/** + * Specifies a range of characters within a string. + * The range includes all characters from first + * to one before afterLast. So if both are + * non-NULL the difference is the length of the text range. + * + * @see UriUriA + * @see UriPathSegmentA + * @see UriHostDataA + * @since 0.3.0 + */ +typedef struct URI_TYPE(TextRangeStruct) { + const URI_CHAR * first; /**< Pointer to first character */ + const URI_CHAR * afterLast; /**< Pointer to character after the last one still in */ +} URI_TYPE(TextRange); /**< @copydoc UriTextRangeStructA */ + + + +/** + * Represents a path segment within a %URI path. + * More precisely it is a node in a linked + * list of path segments. + * + * @see UriUriA + * @since 0.3.0 + */ +typedef struct URI_TYPE(PathSegmentStruct) { + URI_TYPE(TextRange) text; /**< Path segment name */ + struct URI_TYPE(PathSegmentStruct) * next; /**< Pointer to the next path segment in the list, can be NULL if last already */ + + void * reserved; /**< Reserved to the parser */ +} URI_TYPE(PathSegment); /**< @copydoc UriPathSegmentStructA */ + + + +/** + * Holds structured host information. + * This is either a IPv4, IPv6, plain + * text for IPvFuture or all zero for + * a registered name. + * + * @see UriUriA + * @since 0.3.0 + */ +typedef struct URI_TYPE(HostDataStruct) { + UriIp4 * ip4; /**< IPv4 address */ + UriIp6 * ip6; /**< IPv6 address */ + URI_TYPE(TextRange) ipFuture; /**< IPvFuture address */ +} URI_TYPE(HostData); /**< @copydoc UriHostDataStructA */ + + + +/** + * Represents an RFC 3986 %URI. + * Missing components can be {NULL, NULL} ranges. + * + * @see uriParseUriA + * @see uriFreeUriMembersA + * @see UriParserStateA + * @since 0.3.0 + */ +typedef struct URI_TYPE(UriStruct) { + URI_TYPE(TextRange) scheme; /**< Scheme (e.g. "http") */ + URI_TYPE(TextRange) userInfo; /**< User info (e.g. "user:pass") */ + URI_TYPE(TextRange) hostText; /**< Host text (set for all hosts, excluding square brackets) */ + URI_TYPE(HostData) hostData; /**< Structured host type specific data */ + URI_TYPE(TextRange) portText; /**< Port (e.g. "80") */ + URI_TYPE(PathSegment) * pathHead; /**< Head of a linked list of path segments */ + URI_TYPE(PathSegment) * pathTail; /**< Tail of the list behind pathHead */ + URI_TYPE(TextRange) query; /**< Query without leading "?" */ + URI_TYPE(TextRange) fragment; /**< Query without leading "#" */ + UriBool absolutePath; /**< Absolute path flag, distincting "a" and "/a" */ + UriBool owner; /**< Memory owner flag */ + + void * reserved; /**< Reserved to the parser */ +} URI_TYPE(Uri); /**< @copydoc UriUriStructA */ + + + +/** + * Represents a state of the %URI parser. + * Missing components can be NULL to reflect + * a components absence. + * + * @see uriFreeUriMembersA + * @since 0.3.0 + */ +typedef struct URI_TYPE(ParserStateStruct) { + URI_TYPE(Uri) * uri; /**< Plug in the %URI structure to be filled while parsing here */ + int errorCode; /**< Code identifying the occured error */ + const URI_CHAR * errorPos; /**< Pointer to position in case of a syntax error */ + + void * reserved; /**< Reserved to the parser */ +} URI_TYPE(ParserState); /**< @copydoc UriParserStateStructA */ + + + +/** + * Represents a query element. + * More precisely it is a node in a linked + * list of query elements. + * + * @since 0.7.0 + */ +typedef struct URI_TYPE(QueryListStruct) { + const URI_CHAR * key; /**< Key of the query element */ + const URI_CHAR * value; /**< Value of the query element, can be NULL */ + + struct URI_TYPE(QueryListStruct) * next; /**< Pointer to the next key/value pair in the list, can be NULL if last already */ +} URI_TYPE(QueryList); /**< @copydoc UriQueryListStructA */ + + + +/** + * Parses a RFC 3986 URI. + * + * @param state INOUT: Parser state with set output %URI, must not be NULL + * @param first IN: Pointer to the first character to parse, must not be NULL + * @param afterLast IN: Pointer to the character after the last to parse, must not be NULL + * @return 0 on success, error code otherwise + * + * @see uriParseUriA + * @see uriToStringA + * @since 0.3.0 + */ +int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, + const URI_CHAR * first, const URI_CHAR * afterLast); + + + +/** + * Parses a RFC 3986 %URI. + * + * @param state INOUT: Parser state with set output %URI, must not be NULL + * @param text IN: Text to parse, must not be NULL + * @return 0 on success, error code otherwise + * + * @see uriParseUriExA + * @see uriToStringA + * @since 0.3.0 + */ +int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, + const URI_CHAR * text); + + + +/** + * Frees all memory associated with the members + * of the %URI structure. Note that the structure + * itself is not freed, only its members. + * + * @param uri INOUT: %URI structure whose members should be freed + * + * @since 0.3.0 + */ +void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri); + + + +/** + * Percent-encodes all unreserved characters from the input string and + * writes the encoded version to the output string. + * Be sure to allocate 3 times the space of the input buffer for + * the output buffer for normalizeBreaks == URI_FALSE and 6 times + * the space for normalizeBreaks == URI_TRUE + * (since e.g. "\x0d" becomes "%0D%0A" in that case) + * + * @param inFirst IN: Pointer to first character of the input text + * @param inAfterLast IN: Pointer after the last character of the input text + * @param out OUT: Encoded text destination + * @param spaceToPlus IN: Wether to convert ' ' to '+' or not + * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. + * @return Position of terminator in output string + * + * @see uriEscapeA + * @see uriUnescapeInPlaceExA + * @since 0.5.2 + */ +URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst, + const URI_CHAR * inAfterLast, URI_CHAR * out, + UriBool spaceToPlus, UriBool normalizeBreaks); + + + +/** + * Percent-encodes all unreserved characters from the input string and + * writes the encoded version to the output string. + * Be sure to allocate 3 times the space of the input buffer for + * the output buffer for normalizeBreaks == URI_FALSE and 6 times + * the space for normalizeBreaks == URI_TRUE + * (since e.g. "\x0d" becomes "%0D%0A" in that case) + * + * @param in IN: Text source + * @param out OUT: Encoded text destination + * @param spaceToPlus IN: Wether to convert ' ' to '+' or not + * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. + * @return Position of terminator in output string + * + * @see uriEscapeExA + * @see uriUnescapeInPlaceA + * @since 0.5.0 + */ +URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out, + UriBool spaceToPlus, UriBool normalizeBreaks); + + + +/** + * Unescapes percent-encoded groups in a given string. + * E.g. "%20" will become " ". Unescaping is done in place. + * The return value will be point to the new position + * of the terminating zero. Use this value to get the new + * length of the string. NULL is only returned if inout + * is NULL. + * + * @param inout INOUT: Text to unescape/decode + * @param plusToSpace IN: Whether to convert '+' to ' ' or not + * @param breakConversion IN: Line break conversion mode + * @return Pointer to new position of the terminating zero + * + * @see uriUnescapeInPlaceA + * @see uriEscapeExA + * @since 0.5.0 + */ +const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout, + UriBool plusToSpace, UriBreakConversion breakConversion); + + + +/** + * Unescapes percent-encoded groups in a given string. + * E.g. "%20" will become " ". Unescaping is done in place. + * The return value will be point to the new position + * of the terminating zero. Use this value to get the new + * length of the string. NULL is only returned if inout + * is NULL. + * + * NOTE: '+' is not decoded to ' ' and line breaks are not converted. + * Use the more advanced UnescapeInPlaceEx for that features instead. + * + * @param inout INOUT: Text to unescape/decode + * @return Pointer to new position of the terminating zero + * + * @see uriUnescapeInPlaceExA + * @see uriEscapeA + * @since 0.3.0 + */ +const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout); + + + +/** + * Performs reference resolution as described in + * section 5.2.2 of RFC 3986. + * NOTE: On success you have to call uriFreeUriMembersA on \p absoluteDest manually later. + * + * @param absoluteDest OUT: Result %URI + * @param relativeSource IN: Reference to resolve + * @param absoluteBase IN: Base %URI to apply + * @return Error code or 0 on success + * + * @see uriRemoveBaseUriA, uriAddBaseUriExA + * @since 0.4.0 + */ +int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absoluteDest, + const URI_TYPE(Uri) * relativeSource, + const URI_TYPE(Uri) * absoluteBase); + + + +/** + * Performs reference resolution as described in + * section 5.2.2 of RFC 3986. + * NOTE: On success you have to call uriFreeUriMembersA on \p absoluteDest manually later. + * + * @param absoluteDest OUT: Result %URI + * @param relativeSource IN: Reference to resolve + * @param absoluteBase IN: Base %URI to apply + * @param options IN: Configuration to apply + * @return Error code or 0 on success + * + * @see uriRemoveBaseUriA, uriAddBaseUriA + * @since 0.8.1 + */ +int URI_FUNC(AddBaseUriEx)(URI_TYPE(Uri) * absoluteDest, + const URI_TYPE(Uri) * relativeSource, + const URI_TYPE(Uri) * absoluteBase, + UriResolutionOptions options); + + + +/** + * Tries to make a relative %URI (a reference) from an + * absolute %URI and a given base %URI. This can only work if + * the absolute %URI shares scheme and authority with + * the base %URI. If it does not the result will still be + * an absolute URI (with scheme part if necessary). + * NOTE: On success you have to call uriFreeUriMembersA on + * \p dest manually later. + * + * @param dest OUT: Result %URI + * @param absoluteSource IN: Absolute %URI to make relative + * @param absoluteBase IN: Base %URI + * @param domainRootMode IN: Create %URI with path relative to domain root + * @return Error code or 0 on success + * + * @see uriAddBaseUriA, uriAddBaseUriExA + * @since 0.5.2 + */ +int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest, + const URI_TYPE(Uri) * absoluteSource, + const URI_TYPE(Uri) * absoluteBase, + UriBool domainRootMode); + + + +/** + * Checks two URIs for equivalence. Comparison is done + * the naive way, without prior normalization. + * NOTE: Two NULL URIs are equal as well. + * + * @param a IN: First %URI + * @param b IN: Second %URI + * @return URI_TRUE when equal, URI_FAlSE else + * + * @since 0.4.0 + */ +UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a, const URI_TYPE(Uri) * b); + + + +/** + * Calculates the number of characters needed to store the + * string representation of the given %URI excluding the + * terminator. + * + * @param uri IN: %URI to measure + * @param charsRequired OUT: Length of the string representation in characters excluding terminator + * @return Error code or 0 on success + * + * @see uriToStringA + * @since 0.5.0 + */ +int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri, + int * charsRequired); + + + +/** + * Converts a %URI structure back to text as described in + * section 5.3 of RFC 3986. + * + * @param dest OUT: Output destination + * @param uri IN: %URI to convert + * @param maxChars IN: Maximum number of characters to copy including terminator + * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the %URI is too long! + * @return Error code or 0 on success + * + * @see uriToStringCharsRequiredA + * @since 0.4.0 + */ +int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten); + + + +/** + * Determines the components of a %URI that are not normalized. + * + * @param uri IN: %URI to check + * @return Normalization job mask + * + * @see uriNormalizeSyntaxA + * @since 0.5.0 + */ +unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri); + + + +/** + * Normalizes a %URI using a normalization mask. + * The normalization mask decides what components are normalized. + * + * NOTE: If necessary the %URI becomes owner of all memory + * behind the text pointed to. Text is duplicated in that case. + * + * @param uri INOUT: %URI to normalize + * @param mask IN: Normalization mask + * @return Error code or 0 on success + * + * @see uriNormalizeSyntaxA + * @see uriNormalizeSyntaxMaskRequiredA + * @since 0.5.0 + */ +int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask); + + + +/** + * Normalizes all components of a %URI. + * + * NOTE: If necessary the %URI becomes owner of all memory + * behind the text pointed to. Text is duplicated in that case. + * + * @param uri INOUT: %URI to normalize + * @return Error code or 0 on success + * + * @see uriNormalizeSyntaxExA + * @see uriNormalizeSyntaxMaskRequiredA + * @since 0.5.0 + */ +int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri); + + + +/** + * Converts a Unix filename to a %URI string. + * The destination buffer must be large enough to hold 7 + 3 * len(filename) + 1 + * characters in case of an absolute filename or 3 * len(filename) + 1 in case + * of a relative filename. + * + * EXAMPLE + * Input: "/bin/bash" + * Output: "file:///bin/bash" + * + * @param filename IN: Unix filename to convert + * @param uriString OUT: Destination to write %URI string to + * @return Error code or 0 on success + * + * @see uriUriStringToUnixFilenameA + * @see uriWindowsFilenameToUriStringA + * @since 0.5.2 + */ +int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, + URI_CHAR * uriString); + + + +/** + * Converts a Windows filename to a %URI string. + * The destination buffer must be large enough to hold 8 + 3 * len(filename) + 1 + * characters in case of an absolute filename or 3 * len(filename) + 1 in case + * of a relative filename. + * + * EXAMPLE + * Input: "E:\\Documents and Settings" + * Output: "file:///E:/Documents%20and%20Settings" + * + * @param filename IN: Windows filename to convert + * @param uriString OUT: Destination to write %URI string to + * @return Error code or 0 on success + * + * @see uriUriStringToWindowsFilenameA + * @see uriUnixFilenameToUriStringA + * @since 0.5.2 + */ +int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, + URI_CHAR * uriString); + + + +/** + * Extracts a Unix filename from a %URI string. + * The destination buffer must be large enough to hold len(uriString) + 1 - 7 + * characters in case of an absolute %URI or len(uriString) + 1 in case + * of a relative %URI. + * + * @param uriString IN: %URI string to convert + * @param filename OUT: Destination to write filename to + * @return Error code or 0 on success + * + * @see uriUnixFilenameToUriStringA + * @see uriUriStringToWindowsFilenameA + * @since 0.5.2 + */ +int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, + URI_CHAR * filename); + + + +/** + * Extracts a Windows filename from a %URI string. + * The destination buffer must be large enough to hold len(uriString) + 1 - 8 + * characters in case of an absolute %URI or len(uriString) + 1 in case + * of a relative %URI. + * + * @param uriString IN: %URI string to convert + * @param filename OUT: Destination to write filename to + * @return Error code or 0 on success + * + * @see uriWindowsFilenameToUriStringA + * @see uriUriStringToUnixFilenameA + * @since 0.5.2 + */ +int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, + URI_CHAR * filename); + + + +/** + * Calculates the number of characters needed to store the + * string representation of the given query list excluding the + * terminator. It is assumed that line breaks are will be + * normalized to "%0D%0A". + * + * @param queryList IN: Query list to measure + * @param charsRequired OUT: Length of the string representation in characters excluding terminator + * @return Error code or 0 on success + * + * @see uriComposeQueryCharsRequiredExA + * @see uriComposeQueryA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList, + int * charsRequired); + + + +/** + * Calculates the number of characters needed to store the + * string representation of the given query list excluding the + * terminator. + * + * @param queryList IN: Query list to measure + * @param charsRequired OUT: Length of the string representation in characters excluding terminator + * @param spaceToPlus IN: Wether to convert ' ' to '+' or not + * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. + * @return Error code or 0 on success + * + * @see uriComposeQueryCharsRequiredA + * @see uriComposeQueryExA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList, + int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks); + + + +/** + * Converts a query list structure back to a query string. + * The composed string does not start with '?', + * on the way ' ' is converted to '+' and line breaks are + * normalized to "%0D%0A". + * + * @param dest OUT: Output destination + * @param queryList IN: Query list to convert + * @param maxChars IN: Maximum number of characters to copy including terminator + * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the query list is too long! + * @return Error code or 0 on success + * + * @see uriComposeQueryExA + * @see uriComposeQueryMallocA + * @see uriComposeQueryCharsRequiredA + * @see uriDissectQueryMallocA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQuery)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten); + + + +/** + * Converts a query list structure back to a query string. + * The composed string does not start with '?'. + * + * @param dest OUT: Output destination + * @param queryList IN: Query list to convert + * @param maxChars IN: Maximum number of characters to copy including terminator + * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the query list is too long! + * @param spaceToPlus IN: Wether to convert ' ' to '+' or not + * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. + * @return Error code or 0 on success + * + * @see uriComposeQueryA + * @see uriComposeQueryMallocExA + * @see uriComposeQueryCharsRequiredExA + * @see uriDissectQueryMallocExA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten, + UriBool spaceToPlus, UriBool normalizeBreaks); + + + +/** + * Converts a query list structure back to a query string. + * Memory for this string is allocated internally. + * The composed string does not start with '?', + * on the way ' ' is converted to '+' and line breaks are + * normalized to "%0D%0A". + * + * @param dest OUT: Output destination + * @param queryList IN: Query list to convert + * @return Error code or 0 on success + * + * @see uriComposeQueryMallocExA + * @see uriComposeQueryA + * @see uriDissectQueryMallocA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest, + const URI_TYPE(QueryList) * queryList); + + + +/** + * Converts a query list structure back to a query string. + * Memory for this string is allocated internally. + * The composed string does not start with '?'. + * + * @param dest OUT: Output destination + * @param queryList IN: Query list to convert + * @param spaceToPlus IN: Wether to convert ' ' to '+' or not + * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. + * @return Error code or 0 on success + * + * @see uriComposeQueryMallocA + * @see uriComposeQueryExA + * @see uriDissectQueryMallocExA + * @since 0.7.0 + */ +int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest, + const URI_TYPE(QueryList) * queryList, + UriBool spaceToPlus, UriBool normalizeBreaks); + + + +/** + * Constructs a query list from the raw query string of a given URI. + * On the way '+' is converted back to ' ', line breaks are not modified. + * + * @param dest OUT: Output destination + * @param itemCount OUT: Number of items found, can be NULL + * @param first IN: Pointer to first character after '?' + * @param afterLast IN: Pointer to character after the last one still in + * @return Error code or 0 on success + * + * @see uriDissectQueryMallocExA + * @see uriComposeQueryA + * @see uriFreeQueryListA + * @since 0.7.0 + */ +int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount, + const URI_CHAR * first, const URI_CHAR * afterLast); + + + +/** + * Constructs a query list from the raw query string of a given URI. + * + * @param dest OUT: Output destination + * @param itemCount OUT: Number of items found, can be NULL + * @param first IN: Pointer to first character after '?' + * @param afterLast IN: Pointer to character after the last one still in + * @param plusToSpace IN: Whether to convert '+' to ' ' or not + * @param breakConversion IN: Line break conversion mode + * @return Error code or 0 on success + * + * @see uriDissectQueryMallocA + * @see uriComposeQueryExA + * @see uriFreeQueryListA + * @since 0.7.0 + */ +int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount, + const URI_CHAR * first, const URI_CHAR * afterLast, + UriBool plusToSpace, UriBreakConversion breakConversion); + + + +/** + * Frees all memory associated with the given query list. + * The structure itself is freed as well. + * + * @param queryList INOUT: Query list to free + * + * @since 0.7.0 + */ +void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList); + + + +#ifdef __cplusplus +} +#endif + + + +#endif +#endif diff --git a/plugins/uriparser/UriBase.h b/plugins/uriparser/UriBase.h new file mode 100644 index 0000000..bc63b05 --- /dev/null +++ b/plugins/uriparser/UriBase.h @@ -0,0 +1,197 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriBase.h + * Holds definitions independent of the encoding pass. + */ + +#ifndef URI_BASE_H +#define URI_BASE_H 1 + + + +/* Version helper macro */ +#define URI_ANSI_TO_UNICODE(x) L##x + + + +/* Version */ +#define URI_VER_MAJOR 0 +#define URI_VER_MINOR 8 +#define URI_VER_RELEASE 4 +#define URI_VER_SUFFIX_ANSI "" +#define URI_VER_SUFFIX_UNICODE URI_ANSI_TO_UNICODE(URI_VER_SUFFIX_ANSI) + + + +/* More version helper macros */ +#define URI_INT_TO_ANSI_HELPER(x) #x +#define URI_INT_TO_ANSI(x) URI_INT_TO_ANSI_HELPER(x) + +#define URI_INT_TO_UNICODE_HELPER(x) URI_ANSI_TO_UNICODE(#x) +#define URI_INT_TO_UNICODE(x) URI_INT_TO_UNICODE_HELPER(x) + +#define URI_VER_ANSI_HELPER(ma, mi, r, s) \ + URI_INT_TO_ANSI(ma) "." \ + URI_INT_TO_ANSI(mi) "." \ + URI_INT_TO_ANSI(r) \ + s + +#define URI_VER_UNICODE_HELPER(ma, mi, r, s) \ + URI_INT_TO_UNICODE(ma) L"." \ + URI_INT_TO_UNICODE(mi) L"." \ + URI_INT_TO_UNICODE(r) \ + s + + + +/* Full version strings */ +#define URI_VER_ANSI URI_VER_ANSI_HELPER(URI_VER_MAJOR, URI_VER_MINOR, URI_VER_RELEASE, URI_VER_SUFFIX_ANSI) +#define URI_VER_UNICODE URI_VER_UNICODE_HELPER(URI_VER_MAJOR, URI_VER_MINOR, URI_VER_RELEASE, URI_VER_SUFFIX_UNICODE) + + + +/* Unused parameter macro */ +#ifdef __GNUC__ +# define URI_UNUSED(x) unused_##x __attribute__((unused)) +#else +# define URI_UNUSED(x) x +#endif + + + +typedef int UriBool; /**< Boolean type */ + +#define URI_TRUE 1 +#define URI_FALSE 0 + + + +/* Shared errors */ +#define URI_SUCCESS 0 +#define URI_ERROR_SYNTAX 1 /* Parsed text violates expected format */ +#define URI_ERROR_NULL 2 /* One of the params passed was NULL + although it mustn't be */ +#define URI_ERROR_MALLOC 3 /* Requested memory could not be allocated */ +#define URI_ERROR_OUTPUT_TOO_LARGE 4 /* Some output is to large for the receiving buffer */ +#define URI_ERROR_NOT_IMPLEMENTED 8 /* The called function is not implemented yet */ +#define URI_ERROR_RANGE_INVALID 9 /* The parameters passed contained invalid ranges */ + + +/* Errors specific to ToString */ +#define URI_ERROR_TOSTRING_TOO_LONG URI_ERROR_OUTPUT_TOO_LARGE /* Deprecated, test for URI_ERROR_OUTPUT_TOO_LARGE instead */ + +/* Errors specific to AddBaseUri */ +#define URI_ERROR_ADDBASE_REL_BASE 5 /* Given base is not absolute */ + +/* Errors specific to RemoveBaseUri */ +#define URI_ERROR_REMOVEBASE_REL_BASE 6 /* Given base is not absolute */ +#define URI_ERROR_REMOVEBASE_REL_SOURCE 7 /* Given base is not absolute */ + + + +#ifndef URI_DOXYGEN +# include /* For NULL, snprintf */ +# include /* For wchar_t */ +# include /* For strlen, memset, memcpy */ +# include /* For malloc */ +#endif /* URI_DOXYGEN */ + + + +/** + * Holds an IPv4 address. + */ +typedef struct UriIp4Struct { + unsigned char data[4]; /**< Each octet in one byte */ +} UriIp4; /**< @copydoc UriIp4Struct */ + + + +/** + * Holds an IPv6 address. + */ +typedef struct UriIp6Struct { + unsigned char data[16]; /**< Each quad in two bytes */ +} UriIp6; /**< @copydoc UriIp6Struct */ + + + +/** + * Specifies a line break conversion mode. + */ +typedef enum UriBreakConversionEnum { + URI_BR_TO_LF, /**< Convert to Unix line breaks ("\\x0a") */ + URI_BR_TO_CRLF, /**< Convert to Windows line breaks ("\\x0d\\x0a") */ + URI_BR_TO_CR, /**< Convert to Macintosh line breaks ("\\x0d") */ + URI_BR_TO_UNIX = URI_BR_TO_LF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_LF */ + URI_BR_TO_WINDOWS = URI_BR_TO_CRLF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CRLF */ + URI_BR_TO_MAC = URI_BR_TO_CR, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CR */ + URI_BR_DONT_TOUCH /**< Copy line breaks unmodified */ +} UriBreakConversion; /**< @copydoc UriBreakConversionEnum */ + + + +/** + * Specifies which component of a %URI has to be normalized. + */ +typedef enum UriNormalizationMaskEnum { + URI_NORMALIZED = 0, /**< Do not normalize anything */ + URI_NORMALIZE_SCHEME = 1 << 0, /**< Normalize scheme (fix uppercase letters) */ + URI_NORMALIZE_USER_INFO = 1 << 1, /**< Normalize user info (fix uppercase percent-encodings) */ + URI_NORMALIZE_HOST = 1 << 2, /**< Normalize host (fix uppercase letters) */ + URI_NORMALIZE_PATH = 1 << 3, /**< Normalize path (fix uppercase percent-encodings and redundant dot segments) */ + URI_NORMALIZE_QUERY = 1 << 4, /**< Normalize query (fix uppercase percent-encodings) */ + URI_NORMALIZE_FRAGMENT = 1 << 5 /**< Normalize fragment (fix uppercase percent-encodings) */ +} UriNormalizationMask; /**< @copydoc UriNormalizationMaskEnum */ + + + +/** + * Specifies how to resolve %URI references. + */ +typedef enum UriResolutionOptionsEnum { + URI_RESOLVE_STRICTLY = 0, /**< Full RFC conformance */ + URI_RESOLVE_IDENTICAL_SCHEME_COMPAT = 1 << 0 /**< Treat %URI to resolve with identical scheme as having no scheme */ +} UriResolutionOptions; /**< @copydoc UriResolutionOptionsEnum */ + + + +#endif /* URI_BASE_H */ diff --git a/plugins/uriparser/UriCommon.c b/plugins/uriparser/UriCommon.c new file mode 100644 index 0000000..37d6b39 --- /dev/null +++ b/plugins/uriparser/UriCommon.c @@ -0,0 +1,567 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriCommon.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriCommon.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +/*extern*/ const URI_CHAR * const URI_FUNC(SafeToPointTo) = _UT("X"); +/*extern*/ const URI_CHAR * const URI_FUNC(ConstPwd) = _UT("."); +/*extern*/ const URI_CHAR * const URI_FUNC(ConstParent) = _UT(".."); + + + +void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri) { + memset(uri, 0, sizeof(URI_TYPE(Uri))); +} + + + +/* Compares two text ranges for equal text content */ +int URI_FUNC(CompareRange)( + const URI_TYPE(TextRange) * a, + const URI_TYPE(TextRange) * b) { + int diff; + + /* NOTE: Both NULL means equal! */ + if ((a == NULL) || (b == NULL)) { + return ((a == NULL) ? 0 : 1) - ((b == NULL) ? 0 : 1); + } + + /* NOTE: Both NULL means equal! */ + if ((a->first == NULL) || (b->first == NULL)) { + return ((a->first == NULL) ? 0 : 1) - ((b->first == NULL) ? 0 : 1); + } + + diff = ((int)(a->afterLast - a->first) - (int)(b->afterLast - b->first)); + if (diff > 0) { + return 1; + } else if (diff < 0) { + return -1; + } + + diff = URI_STRNCMP(a->first, b->first, (a->afterLast - a->first)); + + if (diff > 0) { + return 1; + } else if (diff < 0) { + return -1; + } + + return diff; +} + + + +/* Properly removes "." and ".." path segments */ +UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri, + UriBool relative) { + if (uri == NULL) { + return URI_TRUE; + } + return URI_FUNC(RemoveDotSegmentsEx)(uri, relative, uri->owner); +} + + + +UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri, + UriBool relative, UriBool pathOwned) { + URI_TYPE(PathSegment) * walker; + if ((uri == NULL) || (uri->pathHead == NULL)) { + return URI_TRUE; + } + + walker = uri->pathHead; + walker->reserved = NULL; /* Prev pointer */ + do { + UriBool removeSegment = URI_FALSE; + int len = (int)(walker->text.afterLast - walker->text.first); + switch (len) { + case 1: + if ((walker->text.first)[0] == _UT('.')) { + /* "." segment -> remove if not essential */ + URI_TYPE(PathSegment) * const prev = walker->reserved; + URI_TYPE(PathSegment) * const nextBackup = walker->next; + + /* Is this dot segment essential? */ + removeSegment = URI_TRUE; + if (relative && (walker == uri->pathHead) && (walker->next != NULL)) { + const URI_CHAR * ch = walker->next->text.first; + for (; ch < walker->next->text.afterLast; ch++) { + if (*ch == _UT(':')) { + removeSegment = URI_FALSE; + break; + } + } + } + + if (removeSegment) { + /* Last segment? */ + if (walker->next != NULL) { + /* Not last segment */ + walker->next->reserved = prev; + + if (prev == NULL) { + /* First but not last segment */ + uri->pathHead = walker->next; + } else { + /* Middle segment */ + prev->next = walker->next; + } + + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + } else { + /* Last segment */ + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + + if (prev == NULL) { + /* Last and first */ + if (URI_FUNC(IsHostSet)(uri)) { + /* Replace "." with empty segment to represent trailing slash */ + walker->text.first = URI_FUNC(SafeToPointTo); + walker->text.afterLast = URI_FUNC(SafeToPointTo); + } else { + free(walker); + + uri->pathHead = NULL; + uri->pathTail = NULL; + } + } else { + /* Last but not first, replace "." with empty segment to represent trailing slash */ + walker->text.first = URI_FUNC(SafeToPointTo); + walker->text.afterLast = URI_FUNC(SafeToPointTo); + } + } + + walker = nextBackup; + } + } + break; + + case 2: + if (((walker->text.first)[0] == _UT('.')) + && ((walker->text.first)[1] == _UT('.'))) { + /* Path ".." -> remove this and the previous segment */ + URI_TYPE(PathSegment) * const prev = walker->reserved; + URI_TYPE(PathSegment) * prevPrev; + URI_TYPE(PathSegment) * const nextBackup = walker->next; + + removeSegment = URI_TRUE; + if (relative) { + if (prev == NULL) { + removeSegment = URI_FALSE; + } else if ((prev != NULL) + && ((prev->text.afterLast - prev->text.first) == 2) + && ((prev->text.first)[0] == _UT('.')) + && ((prev->text.first)[1] == _UT('.'))) { + removeSegment = URI_FALSE; + } + } + + if (removeSegment) { + if (prev != NULL) { + /* Not first segment */ + prevPrev = prev->reserved; + if (prevPrev != NULL) { + /* Not even prev is the first one */ + prevPrev->next = walker->next; + if (walker->next != NULL) { + walker->next->reserved = prevPrev; + } else { + /* Last segment -> insert "" segment to represent trailing slash, update tail */ + URI_TYPE(PathSegment) * const segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); + if (segment == NULL) { + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + + if (pathOwned && (prev->text.first != prev->text.afterLast)) { + free((URI_CHAR *)prev->text.first); + } + free(prev); + + return URI_FALSE; /* Raises malloc error */ + } + memset(segment, 0, sizeof(URI_TYPE(PathSegment))); + segment->text.first = URI_FUNC(SafeToPointTo); + segment->text.afterLast = URI_FUNC(SafeToPointTo); + prevPrev->next = segment; + uri->pathTail = segment; + } + + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + + if (pathOwned && (prev->text.first != prev->text.afterLast)) { + free((URI_CHAR *)prev->text.first); + } + free(prev); + + walker = nextBackup; + } else { + /* Prev is the first segment */ + if (walker->next != NULL) { + uri->pathHead = walker->next; + walker->next->reserved = NULL; + + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + } else { + /* Re-use segment for "" path segment to represent trailing slash, update tail */ + URI_TYPE(PathSegment) * const segment = walker; + if (pathOwned && (segment->text.first != segment->text.afterLast)) { + free((URI_CHAR *)segment->text.first); + } + segment->text.first = URI_FUNC(SafeToPointTo); + segment->text.afterLast = URI_FUNC(SafeToPointTo); + uri->pathHead = segment; + uri->pathTail = segment; + } + + if (pathOwned && (prev->text.first != prev->text.afterLast)) { + free((URI_CHAR *)prev->text.first); + } + free(prev); + + walker = nextBackup; + } + } else { + URI_TYPE(PathSegment) * const anotherNextBackup = walker->next; + /* First segment -> update head pointer */ + uri->pathHead = walker->next; + if (walker->next != NULL) { + walker->next->reserved = NULL; + } else { + /* Last segment -> update tail */ + uri->pathTail = NULL; + } + + if (pathOwned && (walker->text.first != walker->text.afterLast)) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + + walker = anotherNextBackup; + } + } + } + break; + + } + + if (!removeSegment) { + if (walker->next != NULL) { + walker->next->reserved = walker; + } else { + /* Last segment -> update tail */ + uri->pathTail = walker; + } + walker = walker->next; + } + } while (walker != NULL); + + return URI_TRUE; +} + + + +/* Properly removes "." and ".." path segments */ +UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri) { + const UriBool ABSOLUTE = URI_FALSE; + return URI_FUNC(RemoveDotSegments)(uri, ABSOLUTE); +} + + + +unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig) { + switch (hexdig) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + return (unsigned char)(9 + hexdig - _UT('9')); + + case _UT('a'): + case _UT('b'): + case _UT('c'): + case _UT('d'): + case _UT('e'): + case _UT('f'): + return (unsigned char)(15 + hexdig - _UT('f')); + + case _UT('A'): + case _UT('B'): + case _UT('C'): + case _UT('D'): + case _UT('E'): + case _UT('F'): + return (unsigned char)(15 + hexdig - _UT('F')); + + default: + return 0; + } +} + + + +URI_CHAR URI_FUNC(HexToLetter)(unsigned int value) { + /* Uppercase recommended in section 2.1. of RFC 3986 * + * http://tools.ietf.org/html/rfc3986#section-2.1 */ + return URI_FUNC(HexToLetterEx)(value, URI_TRUE); +} + + + +URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase) { + switch (value) { + case 0: return _UT('0'); + case 1: return _UT('1'); + case 2: return _UT('2'); + case 3: return _UT('3'); + case 4: return _UT('4'); + case 5: return _UT('5'); + case 6: return _UT('6'); + case 7: return _UT('7'); + case 8: return _UT('8'); + case 9: return _UT('9'); + + case 10: return (uppercase == URI_TRUE) ? _UT('A') : _UT('a'); + case 11: return (uppercase == URI_TRUE) ? _UT('B') : _UT('b'); + case 12: return (uppercase == URI_TRUE) ? _UT('C') : _UT('c'); + case 13: return (uppercase == URI_TRUE) ? _UT('D') : _UT('d'); + case 14: return (uppercase == URI_TRUE) ? _UT('E') : _UT('e'); + default: return (uppercase == URI_TRUE) ? _UT('F') : _UT('f'); + } +} + + + +/* Checks if a URI has the host component set. */ +UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri) { + return (uri != NULL) + && ((uri->hostText.first != NULL) + || (uri->hostData.ip4 != NULL) + || (uri->hostData.ip6 != NULL) + || (uri->hostData.ipFuture.first != NULL) + ); +} + + + +/* Copies the path segment list from one URI to another. */ +UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, + const URI_TYPE(Uri) * source) { + if (source->pathHead == NULL) { + /* No path component */ + dest->pathHead = NULL; + dest->pathTail = NULL; + } else { + /* Copy list but not the text contained */ + URI_TYPE(PathSegment) * sourceWalker = source->pathHead; + URI_TYPE(PathSegment) * destPrev = NULL; + do { + URI_TYPE(PathSegment) * cur = malloc(sizeof(URI_TYPE(PathSegment))); + if (cur == NULL) { + /* Fix broken list */ + if (destPrev != NULL) { + destPrev->next = NULL; + } + return URI_FALSE; /* Raises malloc error */ + } + + /* From this functions usage we know that * + * the dest URI cannot be uri->owner */ + cur->text = sourceWalker->text; + if (destPrev == NULL) { + /* First segment ever */ + dest->pathHead = cur; + } else { + destPrev->next = cur; + } + destPrev = cur; + sourceWalker = sourceWalker->next; + } while (sourceWalker != NULL); + dest->pathTail = destPrev; + dest->pathTail->next = NULL; + } + + dest->absolutePath = source->absolutePath; + return URI_TRUE; +} + + + +/* Copies the authority part of an URI over to another. */ +UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, + const URI_TYPE(Uri) * source) { + /* From this functions usage we know that * + * the dest URI cannot be uri->owner */ + + /* Copy userInfo */ + dest->userInfo = source->userInfo; + + /* Copy hostText */ + dest->hostText = source->hostText; + + /* Copy hostData */ + if (source->hostData.ip4 != NULL) { + dest->hostData.ip4 = malloc(sizeof(UriIp4)); + if (dest->hostData.ip4 == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + *(dest->hostData.ip4) = *(source->hostData.ip4); + dest->hostData.ip6 = NULL; + dest->hostData.ipFuture.first = NULL; + dest->hostData.ipFuture.afterLast = NULL; + } else if (source->hostData.ip6 != NULL) { + dest->hostData.ip4 = NULL; + dest->hostData.ip6 = malloc(sizeof(UriIp6)); + if (dest->hostData.ip6 == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + *(dest->hostData.ip6) = *(source->hostData.ip6); + dest->hostData.ipFuture.first = NULL; + dest->hostData.ipFuture.afterLast = NULL; + } else { + dest->hostData.ip4 = NULL; + dest->hostData.ip6 = NULL; + dest->hostData.ipFuture = source->hostData.ipFuture; + } + + /* Copy portText */ + dest->portText = source->portText; + + return URI_TRUE; +} + + + +UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri) { + URI_TYPE(PathSegment) * segment; + + if ( /* Case 1: absolute path, empty first segment */ + (uri->absolutePath + && (uri->pathHead != NULL) + && (uri->pathHead->text.afterLast == uri->pathHead->text.first)) + + /* Case 2: relative path, empty first and second segment */ + || (!uri->absolutePath + && (uri->pathHead != NULL) + && (uri->pathHead->next != NULL) + && (uri->pathHead->text.afterLast == uri->pathHead->text.first) + && (uri->pathHead->next->text.afterLast == uri->pathHead->next->text.first))) { + /* NOOP */ + } else { + return URI_TRUE; + } + + segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); + if (segment == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + + /* Insert "." segment in front */ + segment->next = uri->pathHead; + segment->text.first = URI_FUNC(ConstPwd); + segment->text.afterLast = URI_FUNC(ConstPwd) + 1; + uri->pathHead = segment; + return URI_TRUE; +} + + + +void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri) { + /* Fix path if only one empty segment */ + if (!uri->absolutePath + && !URI_FUNC(IsHostSet)(uri) + && (uri->pathHead != NULL) + && (uri->pathHead->next == NULL) + && (uri->pathHead->text.first == uri->pathHead->text.afterLast)) { + free(uri->pathHead); + uri->pathHead = NULL; + uri->pathTail = NULL; + } +} + + + +#endif diff --git a/plugins/uriparser/UriCommon.h b/plugins/uriparser/UriCommon.h new file mode 100644 index 0000000..f6bc2cc --- /dev/null +++ b/plugins/uriparser/UriCommon.h @@ -0,0 +1,104 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI)) \ + || (defined(URI_PASS_UNICODE) && !defined(URI_COMMON_H_UNICODE)) \ + || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriCommon.h" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriCommon.h" +# undef URI_PASS_UNICODE +# endif +/* Only one pass for each encoding */ +#elif (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI) \ + && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ + && !defined(URI_COMMON_H_UNICODE) && defined(URI_ENABLE_UNICODE)) +# ifdef URI_PASS_ANSI +# define URI_COMMON_H_ANSI 1 +# include +# else +# define URI_COMMON_H_UNICODE 1 +# include +# endif + + + +/* Used to point to from empty path segments. + * X.first and X.afterLast must be the same non-NULL value then. */ +extern const URI_CHAR * const URI_FUNC(SafeToPointTo); +extern const URI_CHAR * const URI_FUNC(ConstPwd); +extern const URI_CHAR * const URI_FUNC(ConstParent); + + + +void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri); + +int URI_FUNC(CompareRange)( + const URI_TYPE(TextRange) * a, + const URI_TYPE(TextRange) * b); + +UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri); +UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri, UriBool relative); +UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri, + UriBool relative, UriBool pathOwned); + +unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig); +URI_CHAR URI_FUNC(HexToLetter)(unsigned int value); +URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase); + +UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri); + +UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source); +UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source); + +UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri); +void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri); + + +#endif +#endif diff --git a/plugins/uriparser/UriCompare.c b/plugins/uriparser/UriCompare.c new file mode 100644 index 0000000..6896f64 --- /dev/null +++ b/plugins/uriparser/UriCompare.c @@ -0,0 +1,168 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriCompare.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriCompare.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include +# include "UriCommon.h" +#endif + + + +UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a, + const URI_TYPE(Uri) * b) { + /* NOTE: Both NULL means equal! */ + if ((a == NULL) || (b == NULL)) { + return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE; + } + + /* scheme */ + if (URI_FUNC(CompareRange)(&(a->scheme), &(b->scheme))) { + return URI_FALSE; + } + + /* absolutePath */ + if ((a->scheme.first == NULL)&& (a->absolutePath != b->absolutePath)) { + return URI_FALSE; + } + + /* userInfo */ + if (URI_FUNC(CompareRange)(&(a->userInfo), &(b->userInfo))) { + return URI_FALSE; + } + + /* Host */ + if (((a->hostData.ip4 == NULL) != (b->hostData.ip4 == NULL)) + || ((a->hostData.ip6 == NULL) != (b->hostData.ip6 == NULL)) + || ((a->hostData.ipFuture.first == NULL) + != (b->hostData.ipFuture.first == NULL))) { + return URI_FALSE; + } + + if (a->hostData.ip4 != NULL) { + if (memcmp(a->hostData.ip4->data, b->hostData.ip4->data, 4)) { + return URI_FALSE; + } + } + + if (a->hostData.ip6 != NULL) { + if (memcmp(a->hostData.ip6->data, b->hostData.ip6->data, 16)) { + return URI_FALSE; + } + } + + if (a->hostData.ipFuture.first != NULL) { + if (URI_FUNC(CompareRange)(&(a->hostData.ipFuture), &(b->hostData.ipFuture))) { + return URI_FALSE; + } + } + + if ((a->hostData.ip4 == NULL) + && (a->hostData.ip6 == NULL) + && (a->hostData.ipFuture.first == NULL)) { + if (URI_FUNC(CompareRange)(&(a->hostText), &(b->hostText))) { + return URI_FALSE; + } + } + + /* portText */ + if (URI_FUNC(CompareRange)(&(a->portText), &(b->portText))) { + return URI_FALSE; + } + + /* Path */ + if ((a->pathHead == NULL) != (b->pathHead == NULL)) { + return URI_FALSE; + } + + if (a->pathHead != NULL) { + URI_TYPE(PathSegment) * walkA = a->pathHead; + URI_TYPE(PathSegment) * walkB = b->pathHead; + do { + if (URI_FUNC(CompareRange)(&(walkA->text), &(walkB->text))) { + return URI_FALSE; + } + if ((walkA->next == NULL) != (walkB->next == NULL)) { + return URI_FALSE; + } + walkA = walkA->next; + walkB = walkB->next; + } while (walkA != NULL); + } + + /* query */ + if (URI_FUNC(CompareRange)(&(a->query), &(b->query))) { + return URI_FALSE; + } + + /* fragment */ + if (URI_FUNC(CompareRange)(&(a->fragment), &(b->fragment))) { + return URI_FALSE; + } + + return URI_TRUE; /* Equal*/ +} + + + +#endif diff --git a/plugins/uriparser/UriDefsAnsi.h b/plugins/uriparser/UriDefsAnsi.h new file mode 100644 index 0000000..deaefaa --- /dev/null +++ b/plugins/uriparser/UriDefsAnsi.h @@ -0,0 +1,82 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriDefsAnsi.h + * Holds definitions for the ANSI pass. + * NOTE: This header is included N times, not once. + */ + +/* Allow multi inclusion */ +#include "UriDefsConfig.h" + + + +#undef URI_CHAR +#define URI_CHAR char + +#undef _UT +#define _UT(x) x + + + +#undef URI_FUNC +#define URI_FUNC(x) uri##x##A + +#undef URI_TYPE +#define URI_TYPE(x) Uri##x##A + + + +#undef URI_STRLEN +#define URI_STRLEN strlen +#undef URI_STRCPY +#define URI_STRCPY strcpy +#undef URI_STRCMP +#define URI_STRCMP strcmp +#undef URI_STRNCMP +#define URI_STRNCMP strncmp + +/* TODO Remove on next source-compatibility break */ +#undef URI_SNPRINTF +#if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32)) +# define URI_SNPRINTF _snprintf +#else +# define URI_SNPRINTF snprintf +#endif diff --git a/plugins/uriparser/UriDefsConfig.h b/plugins/uriparser/UriDefsConfig.h new file mode 100644 index 0000000..d87ccb6 --- /dev/null +++ b/plugins/uriparser/UriDefsConfig.h @@ -0,0 +1,101 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriDefsConfig.h + * Adjusts the internal configuration after processing external definitions. + */ + +#ifndef URI_DEFS_CONFIG_H +#define URI_DEFS_CONFIG_H 1 + + + +/* Deny external overriding */ +#undef URI_ENABLE_ANSI /* Internal for !URI_NO_ANSI */ +#undef URI_ENABLE_UNICODE /* Internal for !URI_NO_UNICODE */ + + + +/* Encoding */ +#ifdef URI_NO_ANSI +# ifdef URI_NO_UNICODE +/* No encoding at all */ +# error URI_NO_ANSI and URI_NO_UNICODE cannot go together. +# else +/* Unicode only */ +# define URI_ENABLE_UNICODE 1 +# endif +#else +# ifdef URI_NO_UNICODE +/* ANSI only */ +# define URI_ENABLE_ANSI 1 +# else +/* Both ANSI and Unicode */ +# define URI_ENABLE_ANSI 1 +# define URI_ENABLE_UNICODE 1 +# endif +#endif + + + +/* Function inlining, not ANSI/ISO C! */ +#if (defined(URI_DOXYGEN) || defined(URI_SIZEDOWN)) +# define URI_INLINE +#elif defined(__INTEL_COMPILER) +/* Intel C/C++ */ +/* http://predef.sourceforge.net/precomp.html#sec20 */ +/* http://www.intel.com/support/performancetools/c/windows/sb/CS-007751.htm#2 */ +# define URI_INLINE __force_inline +#elif defined(_MSC_VER) +/* Microsoft Visual C++ */ +/* http://predef.sourceforge.net/precomp.html#sec32 */ +/* http://msdn2.microsoft.com/en-us/library/ms882281.aspx */ +# define URI_INLINE __forceinline +#elif (__STDC_VERSION__ >= 199901L) +/* C99, "inline" is a keyword */ +# define URI_INLINE inline +#else +/* No inlining */ +# define URI_INLINE +#endif + + + +#endif /* URI_DEFS_CONFIG_H */ diff --git a/plugins/uriparser/UriDefsUnicode.h b/plugins/uriparser/UriDefsUnicode.h new file mode 100644 index 0000000..fa4befc --- /dev/null +++ b/plugins/uriparser/UriDefsUnicode.h @@ -0,0 +1,82 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriDefsUnicode.h + * Holds definitions for the Unicode pass. + * NOTE: This header is included N times, not once. + */ + +/* Allow multi inclusion */ +#include "UriDefsConfig.h" + + + +#undef URI_CHAR +#define URI_CHAR wchar_t + +#undef _UT +#define _UT(x) L##x + + + +#undef URI_FUNC +#define URI_FUNC(x) uri##x##W + +#undef URI_TYPE +#define URI_TYPE(x) Uri##x##W + + + +#undef URI_STRLEN +#define URI_STRLEN wcslen +#undef URI_STRCPY +#define URI_STRCPY wcscpy +#undef URI_STRCMP +#define URI_STRCMP wcscmp +#undef URI_STRNCMP +#define URI_STRNCMP wcsncmp + +/* TODO Remove on next source-compatibility break */ +#undef URI_SNPRINTF +#if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32)) +# define URI_SNPRINTF _snwprintf +#else +# define URI_SNPRINTF swprintf +#endif diff --git a/plugins/uriparser/UriEscape.c b/plugins/uriparser/UriEscape.c new file mode 100644 index 0000000..79ee3a6 --- /dev/null +++ b/plugins/uriparser/UriEscape.c @@ -0,0 +1,453 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriEscape.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriEscape.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out, + UriBool spaceToPlus, UriBool normalizeBreaks) { + return URI_FUNC(EscapeEx)(in, NULL, out, spaceToPlus, normalizeBreaks); +} + + + +URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst, + const URI_CHAR * inAfterLast, URI_CHAR * out, + UriBool spaceToPlus, UriBool normalizeBreaks) { + const URI_CHAR * read = inFirst; + URI_CHAR * write = out; + UriBool prevWasCr = URI_FALSE; + if ((out == NULL) || (inFirst == out)) { + return NULL; + } else if (inFirst == NULL) { + if (out != NULL) { + out[0] = _UT('\0'); + } + return out; + } + + for (;;) { + if ((inAfterLast != NULL) && (read >= inAfterLast)) { + write[0] = _UT('\0'); + return write; + } + + switch (read[0]) { + case _UT('\0'): + write[0] = _UT('\0'); + return write; + + case _UT(' '): + if (spaceToPlus) { + write[0] = _UT('+'); + write++; + } else { + write[0] = _UT('%'); + write[1] = _UT('2'); + write[2] = _UT('0'); + write += 3; + } + prevWasCr = URI_FALSE; + break; + + case _UT('a'): /* ALPHA */ + case _UT('A'): + case _UT('b'): + case _UT('B'): + case _UT('c'): + case _UT('C'): + case _UT('d'): + case _UT('D'): + case _UT('e'): + case _UT('E'): + case _UT('f'): + case _UT('F'): + case _UT('g'): + case _UT('G'): + case _UT('h'): + case _UT('H'): + case _UT('i'): + case _UT('I'): + case _UT('j'): + case _UT('J'): + case _UT('k'): + case _UT('K'): + case _UT('l'): + case _UT('L'): + case _UT('m'): + case _UT('M'): + case _UT('n'): + case _UT('N'): + case _UT('o'): + case _UT('O'): + case _UT('p'): + case _UT('P'): + case _UT('q'): + case _UT('Q'): + case _UT('r'): + case _UT('R'): + case _UT('s'): + case _UT('S'): + case _UT('t'): + case _UT('T'): + case _UT('u'): + case _UT('U'): + case _UT('v'): + case _UT('V'): + case _UT('w'): + case _UT('W'): + case _UT('x'): + case _UT('X'): + case _UT('y'): + case _UT('Y'): + case _UT('z'): + case _UT('Z'): + case _UT('0'): /* DIGIT */ + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + case _UT('-'): /* "-" / "." / "_" / "~" */ + case _UT('.'): + case _UT('_'): + case _UT('~'): + /* Copy unmodified */ + write[0] = read[0]; + write++; + + prevWasCr = URI_FALSE; + break; + + case _UT('\x0a'): + if (normalizeBreaks) { + if (!prevWasCr) { + write[0] = _UT('%'); + write[1] = _UT('0'); + write[2] = _UT('D'); + write[3] = _UT('%'); + write[4] = _UT('0'); + write[5] = _UT('A'); + write += 6; + } + } else { + write[0] = _UT('%'); + write[1] = _UT('0'); + write[2] = _UT('A'); + write += 3; + } + prevWasCr = URI_FALSE; + break; + + case _UT('\x0d'): + if (normalizeBreaks) { + write[0] = _UT('%'); + write[1] = _UT('0'); + write[2] = _UT('D'); + write[3] = _UT('%'); + write[4] = _UT('0'); + write[5] = _UT('A'); + write += 6; + } else { + write[0] = _UT('%'); + write[1] = _UT('0'); + write[2] = _UT('D'); + write += 3; + } + prevWasCr = URI_TRUE; + break; + + default: + /* Percent encode */ + { + const unsigned char code = (unsigned char)read[0]; + write[0] = _UT('%'); + write[1] = URI_FUNC(HexToLetter)(code >> 4); + write[2] = URI_FUNC(HexToLetter)(code & 0x0f); + write += 3; + } + prevWasCr = URI_FALSE; + break; + } + + read++; + } +} + + + +const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout) { + return URI_FUNC(UnescapeInPlaceEx)(inout, URI_FALSE, URI_BR_DONT_TOUCH); +} + + + +const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout, + UriBool plusToSpace, UriBreakConversion breakConversion) { + URI_CHAR * read = inout; + URI_CHAR * write = inout; + UriBool prevWasCr = URI_FALSE; + + if (inout == NULL) { + return NULL; + } + + for (;;) { + switch (read[0]) { + case _UT('\0'): + if (read > write) { + write[0] = _UT('\0'); + } + return write; + + case _UT('%'): + switch (read[1]) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + case _UT('a'): + case _UT('b'): + case _UT('c'): + case _UT('d'): + case _UT('e'): + case _UT('f'): + case _UT('A'): + case _UT('B'): + case _UT('C'): + case _UT('D'): + case _UT('E'): + case _UT('F'): + switch (read[2]) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + case _UT('a'): + case _UT('b'): + case _UT('c'): + case _UT('d'): + case _UT('e'): + case _UT('f'): + case _UT('A'): + case _UT('B'): + case _UT('C'): + case _UT('D'): + case _UT('E'): + case _UT('F'): + { + /* Percent group found */ + const unsigned char left = URI_FUNC(HexdigToInt)(read[1]); + const unsigned char right = URI_FUNC(HexdigToInt)(read[2]); + const int code = 16 * left + right; + switch (code) { + case 10: + switch (breakConversion) { + case URI_BR_TO_LF: + if (!prevWasCr) { + write[0] = (URI_CHAR)10; + write++; + } + break; + + case URI_BR_TO_CRLF: + if (!prevWasCr) { + write[0] = (URI_CHAR)13; + write[1] = (URI_CHAR)10; + write += 2; + } + break; + + case URI_BR_TO_CR: + if (!prevWasCr) { + write[0] = (URI_CHAR)13; + write++; + } + break; + + case URI_BR_DONT_TOUCH: + default: + write[0] = (URI_CHAR)10; + write++; + + } + prevWasCr = URI_FALSE; + break; + + case 13: + switch (breakConversion) { + case URI_BR_TO_LF: + write[0] = (URI_CHAR)10; + write++; + break; + + case URI_BR_TO_CRLF: + write[0] = (URI_CHAR)13; + write[1] = (URI_CHAR)10; + write += 2; + break; + + case URI_BR_TO_CR: + write[0] = (URI_CHAR)13; + write++; + break; + + case URI_BR_DONT_TOUCH: + default: + write[0] = (URI_CHAR)13; + write++; + + } + prevWasCr = URI_TRUE; + break; + + default: + write[0] = (URI_CHAR)(code); + write++; + + prevWasCr = URI_FALSE; + + } + read += 3; + } + break; + + default: + /* Copy two chars unmodified and */ + /* look at this char again */ + if (read > write) { + write[0] = read[0]; + write[1] = read[1]; + } + read += 2; + write += 2; + + prevWasCr = URI_FALSE; + } + break; + + default: + /* Copy one char unmodified and */ + /* look at this char again */ + if (read > write) { + write[0] = read[0]; + } + read++; + write++; + + prevWasCr = URI_FALSE; + } + break; + + case _UT('+'): + if (plusToSpace) { + /* Convert '+' to ' ' */ + write[0] = _UT(' '); + } else { + /* Copy one char unmodified */ + if (read > write) { + write[0] = read[0]; + } + } + read++; + write++; + + prevWasCr = URI_FALSE; + break; + + default: + /* Copy one char unmodified */ + if (read > write) { + write[0] = read[0]; + } + read++; + write++; + + prevWasCr = URI_FALSE; + } + } +} + + + +#endif diff --git a/plugins/uriparser/UriFile.c b/plugins/uriparser/UriFile.c new file mode 100644 index 0000000..9cf788f --- /dev/null +++ b/plugins/uriparser/UriFile.c @@ -0,0 +1,226 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriFile.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriFile.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +#endif + + + +static URI_INLINE int URI_FUNC(FilenameToUriString)(const URI_CHAR * filename, + URI_CHAR * uriString, UriBool fromUnix) { + const URI_CHAR * input = filename; + const URI_CHAR * lastSep = input - 1; + UriBool firstSegment = URI_TRUE; + URI_CHAR * output = uriString; + UriBool absolute; + UriBool is_windows_network; + + if ((filename == NULL) || (uriString == NULL)) { + return URI_ERROR_NULL; + } + + is_windows_network = (filename[0] == _UT('\\')) && (filename[1] == _UT('\\')); + absolute = fromUnix + ? (filename[0] == _UT('/')) + : ((filename[0] != _UT('\0')) && (filename[1] == _UT(':')) + || is_windows_network); + + if (absolute) { + const URI_CHAR * const prefix = fromUnix + ? _UT("file://") + : is_windows_network + ? _UT("file:") + : _UT("file:///"); + const int prefixLen = URI_STRLEN(prefix); + + /* Copy prefix */ + memcpy(uriString, prefix, prefixLen * sizeof(URI_CHAR)); + output += prefixLen; + } + + /* Copy and escape on the fly */ + for (;;) { + if ((input[0] == _UT('\0')) + || (fromUnix && input[0] == _UT('/')) + || (!fromUnix && input[0] == _UT('\\'))) { + /* Copy text after last seperator */ + if (lastSep + 1 < input) { + if (!fromUnix && absolute && (firstSegment == URI_TRUE)) { + /* Quick hack to not convert "C:" to "C%3A" */ + const int charsToCopy = (int)(input - (lastSep + 1)); + memcpy(output, lastSep + 1, charsToCopy * sizeof(URI_CHAR)); + output += charsToCopy; + } else { + output = URI_FUNC(EscapeEx)(lastSep + 1, input, output, + URI_FALSE, URI_FALSE); + } + } + firstSegment = URI_FALSE; + } + + if (input[0] == _UT('\0')) { + output[0] = _UT('\0'); + break; + } else if (fromUnix && (input[0] == _UT('/'))) { + /* Copy separators unmodified */ + output[0] = _UT('/'); + output++; + lastSep = input; + } else if (!fromUnix && (input[0] == _UT('\\'))) { + /* Convert backslashes to forward slashes */ + output[0] = _UT('/'); + output++; + lastSep = input; + } + input++; + } + + return URI_SUCCESS; +} + + + +static URI_INLINE int URI_FUNC(UriStringToFilename)(const URI_CHAR * uriString, + URI_CHAR * filename, UriBool toUnix) { + if ((uriString == NULL) || (filename == NULL)) { + return URI_ERROR_NULL; + } + + { + const UriBool file_two_slashes = + URI_STRNCMP(uriString, _UT("file://"), URI_STRLEN(_UT("file://"))) == 0; + const UriBool file_three_slashes = file_two_slashes + && (URI_STRNCMP(uriString, _UT("file:///"), URI_STRLEN(_UT("file:///"))) == 0); + + const size_t charsToSkip = file_two_slashes + ? file_three_slashes + ? toUnix + /* file:///bin/bash */ + ? URI_STRLEN(_UT("file://")) + /* file:///E:/Documents%20and%20Settings */ + : URI_STRLEN(_UT("file:///")) + /* file://Server01/Letter.txt */ + : URI_STRLEN(_UT("file://")) + : 0; + const size_t charsToCopy = URI_STRLEN(uriString + charsToSkip) + 1; + + const UriBool is_windows_network_with_authority = + (toUnix == URI_FALSE) + && file_two_slashes + && ! file_three_slashes; + + URI_CHAR * const unescape_target = is_windows_network_with_authority + ? (filename + 2) + : filename; + + if (is_windows_network_with_authority) { + filename[0] = '\\'; + filename[1] = '\\'; + } + + memcpy(unescape_target, uriString + charsToSkip, charsToCopy * sizeof(URI_CHAR)); + URI_FUNC(UnescapeInPlaceEx)(filename, URI_FALSE, URI_BR_DONT_TOUCH); + } + + /* Convert forward slashes to backslashes */ + if (!toUnix) { + URI_CHAR * walker = filename; + while (walker[0] != _UT('\0')) { + if (walker[0] == _UT('/')) { + walker[0] = _UT('\\'); + } + walker++; + } + } + + return URI_SUCCESS; +} + + + +int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) { + return URI_FUNC(FilenameToUriString)(filename, uriString, URI_TRUE); +} + + + +int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) { + return URI_FUNC(FilenameToUriString)(filename, uriString, URI_FALSE); +} + + + +int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, URI_CHAR * filename) { + return URI_FUNC(UriStringToFilename)(uriString, filename, URI_TRUE); +} + + + +int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, URI_CHAR * filename) { + return URI_FUNC(UriStringToFilename)(uriString, filename, URI_FALSE); +} + + + +#endif diff --git a/plugins/uriparser/UriIp4.c b/plugins/uriparser/UriIp4.c new file mode 100644 index 0000000..c00910b --- /dev/null +++ b/plugins/uriparser/UriIp4.c @@ -0,0 +1,329 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriIp4.c + * Holds the IPv4 parser implementation. + * NOTE: This source file includes itself twice. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriIp4.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriIp4.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriIp4Base.h" +# include +#endif + + + +/* Prototypes */ +static const URI_CHAR * URI_FUNC(ParseDecOctet)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseDecOctetOne)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseDecOctetTwo)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseDecOctetThree)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseDecOctetFour)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast); + + + +/* + * [ipFourAddress]->[decOctet]<.>[decOctet]<.>[decOctet]<.>[decOctet] + */ +int URI_FUNC(ParseIpFourAddress)(unsigned char * octetOutput, + const URI_CHAR * first, const URI_CHAR * afterLast) { + const URI_CHAR * after; + UriIp4Parser parser; + + /* Essential checks */ + if ((octetOutput == NULL) || (first == NULL) + || (afterLast <= first)) { + return URI_ERROR_SYNTAX; + } + + /* Reset parser */ + parser.stackCount = 0; + + /* Octet #1 */ + after = URI_FUNC(ParseDecOctet)(&parser, first, afterLast); + if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { + return URI_ERROR_SYNTAX; + } + uriStackToOctet(&parser, octetOutput); + + /* Octet #2 */ + after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); + if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { + return URI_ERROR_SYNTAX; + } + uriStackToOctet(&parser, octetOutput + 1); + + /* Octet #3 */ + after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); + if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { + return URI_ERROR_SYNTAX; + } + uriStackToOctet(&parser, octetOutput + 2); + + /* Octet #4 */ + after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); + if (after != afterLast) { + return URI_ERROR_SYNTAX; + } + uriStackToOctet(&parser, octetOutput + 3); + + return URI_SUCCESS; +} + + + +/* + * [decOctet]-><0> + * [decOctet]-><1>[decOctetOne] + * [decOctet]-><2>[decOctetTwo] + * [decOctet]-><3>[decOctetThree] + * [decOctet]-><4>[decOctetThree] + * [decOctet]-><5>[decOctetThree] + * [decOctet]-><6>[decOctetThree] + * [decOctet]-><7>[decOctetThree] + * [decOctet]-><8>[decOctetThree] + * [decOctet]-><9>[decOctetThree] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctet)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return NULL; + } + + switch (*first) { + case _UT('0'): + uriPushToStack(parser, 0); + return first + 1; + + case _UT('1'): + uriPushToStack(parser, 1); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetOne)(parser, first + 1, afterLast); + + case _UT('2'): + uriPushToStack(parser, 2); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetTwo)(parser, first + 1, afterLast); + + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); + + default: + return NULL; + } +} + + + +/* + * [decOctetOne]-> + * [decOctetOne]->[DIGIT][decOctetThree] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetOne)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); + + default: + return first; + } +} + + + +/* + * [decOctetTwo]-> + * [decOctetTwo]-><0>[decOctetThree] + * [decOctetTwo]-><1>[decOctetThree] + * [decOctetTwo]-><2>[decOctetThree] + * [decOctetTwo]-><3>[decOctetThree] + * [decOctetTwo]-><4>[decOctetThree] + * [decOctetTwo]-><5>[decOctetFour] + * [decOctetTwo]-><6> + * [decOctetTwo]-><7> + * [decOctetTwo]-><8> + * [decOctetTwo]-><9> +*/ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetTwo)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); + + case _UT('5'): + uriPushToStack(parser, 5); + return (const URI_CHAR *)URI_FUNC(ParseDecOctetFour)(parser, first + 1, afterLast); + + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return first + 1; + + default: + return first; + } +} + + + +/* + * [decOctetThree]-> + * [decOctetThree]->[DIGIT] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetThree)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + case _UT('6'): + case _UT('7'): + case _UT('8'): + case _UT('9'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return first + 1; + + default: + return first; + } +} + + + +/* + * [decOctetFour]-> + * [decOctetFour]-><0> + * [decOctetFour]-><1> + * [decOctetFour]-><2> + * [decOctetFour]-><3> + * [decOctetFour]-><4> + * [decOctetFour]-><5> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetFour)(UriIp4Parser * parser, + const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('0'): + case _UT('1'): + case _UT('2'): + case _UT('3'): + case _UT('4'): + case _UT('5'): + uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); + return first + 1; + + default: + return first; + } +} + + + +#endif diff --git a/plugins/uriparser/UriIp4.h b/plugins/uriparser/UriIp4.h new file mode 100644 index 0000000..885a35c --- /dev/null +++ b/plugins/uriparser/UriIp4.h @@ -0,0 +1,92 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriIp4.h + * Holds the IPv4 parser interface. + * NOTE: This header includes itself twice. + */ + +#if (defined(URI_PASS_ANSI) && !defined(URI_IP4_TWICE_H_ANSI)) \ + || (defined(URI_PASS_UNICODE) && !defined(URI_IP4_TWICE_H_UNICODE)) \ + || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* What encodings are enabled? */ +#include "UriDefsConfig.h" +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriIp4.h" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriIp4.h" +# undef URI_PASS_UNICODE +# endif +/* Only one pass for each encoding */ +#elif (defined(URI_PASS_ANSI) && !defined(URI_IP4_TWICE_H_ANSI) \ + && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ + && !defined(URI_IP4_TWICE_H_UNICODE) && defined(URI_ENABLE_UNICODE)) +# ifdef URI_PASS_ANSI +# define URI_IP4_TWICE_H_ANSI 1 +# include "UriDefsAnsi.h" +# else +# define URI_IP4_TWICE_H_UNICODE 1 +# include "UriDefsUnicode.h" +# include +# endif + + + +/** + * Converts a IPv4 text representation into four bytes. + * + * @param octetOutput Output destination + * @param first First character of IPv4 text to parse + * @param afterLast Position to stop parsing at + * @return Error code or 0 on success + */ +int URI_FUNC(ParseIpFourAddress)(unsigned char * octetOutput, + const URI_CHAR * first, const URI_CHAR * afterLast); + + + +#endif +#endif diff --git a/plugins/uriparser/UriIp4Base.c b/plugins/uriparser/UriIp4Base.c new file mode 100644 index 0000000..5cd298f --- /dev/null +++ b/plugins/uriparser/UriIp4Base.c @@ -0,0 +1,96 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriIp4Base.c + * Holds code independent of the encoding pass. + */ + +#ifndef URI_DOXYGEN +# include "UriIp4Base.h" +#endif + + + +void uriStackToOctet(UriIp4Parser * parser, unsigned char * octet) { + switch (parser->stackCount) { + case 1: + *octet = parser->stackOne; + break; + + case 2: + *octet = parser->stackOne * 10 + + parser->stackTwo; + break; + + case 3: + *octet = parser->stackOne * 100 + + parser->stackTwo * 10 + + parser->stackThree; + break; + + default: + ; + } + parser->stackCount = 0; +} + + + +void uriPushToStack(UriIp4Parser * parser, unsigned char digit) { + switch (parser->stackCount) { + case 0: + parser->stackOne = digit; + parser->stackCount = 1; + break; + + case 1: + parser->stackTwo = digit; + parser->stackCount = 2; + break; + + case 2: + parser->stackThree = digit; + parser->stackCount = 3; + break; + + default: + ; + } +} diff --git a/plugins/uriparser/UriIp4Base.h b/plugins/uriparser/UriIp4Base.h new file mode 100644 index 0000000..23b838e --- /dev/null +++ b/plugins/uriparser/UriIp4Base.h @@ -0,0 +1,59 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef URI_IP4_BASE_H +#define URI_IP4_BASE_H 1 + + + +typedef struct UriIp4ParserStruct { + unsigned char stackCount; + unsigned char stackOne; + unsigned char stackTwo; + unsigned char stackThree; +} UriIp4Parser; + + + +void uriPushToStack(UriIp4Parser * parser, unsigned char digit); +void uriStackToOctet(UriIp4Parser * parser, unsigned char * octet); + + + +#endif /* URI_IP4_BASE_H */ diff --git a/plugins/uriparser/UriNormalize.c b/plugins/uriparser/UriNormalize.c new file mode 100644 index 0000000..49db9ff --- /dev/null +++ b/plugins/uriparser/UriNormalize.c @@ -0,0 +1,728 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriNormalize.c + * Holds the RFC 3986 %URI normalization implementation. + * NOTE: This source file includes itself twice. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriNormalize.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriNormalize.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriNormalizeBase.h" +# include "UriCommon.h" +#endif + + + +static int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, + unsigned int * outMask); + +static UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask, + unsigned int maskTest, URI_TYPE(TextRange) * range); +static UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri, + unsigned int * doneMask); + +static void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first, + const URI_CHAR ** afterLast); +static UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first, + const URI_CHAR ** afterLast); +static void URI_FUNC(FixPercentEncodingEngine)( + const URI_CHAR * inFirst, const URI_CHAR * inAfterLast, + const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast); + +static UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first, + const URI_CHAR * afterLast); +static UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first, + const URI_CHAR * afterLast); + +static void URI_FUNC(LowercaseInplace)(const URI_CHAR * first, + const URI_CHAR * afterLast); +static UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first, + const URI_CHAR ** afterLast); + +static void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri, + unsigned int revertMask); + + + +static URI_INLINE void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri, + unsigned int revertMask) { + if (revertMask & URI_NORMALIZE_SCHEME) { + free((URI_CHAR *)uri->scheme.first); + uri->scheme.first = NULL; + uri->scheme.afterLast = NULL; + } + + if (revertMask & URI_NORMALIZE_USER_INFO) { + free((URI_CHAR *)uri->userInfo.first); + uri->userInfo.first = NULL; + uri->userInfo.afterLast = NULL; + } + + if (revertMask & URI_NORMALIZE_HOST) { + if (uri->hostData.ipFuture.first != NULL) { + /* IPvFuture */ + free((URI_CHAR *)uri->hostData.ipFuture.first); + uri->hostData.ipFuture.first = NULL; + uri->hostData.ipFuture.afterLast = NULL; + uri->hostText.first = NULL; + uri->hostText.afterLast = NULL; + } else if ((uri->hostText.first != NULL) + && (uri->hostData.ip4 == NULL) + && (uri->hostData.ip6 == NULL)) { + /* Regname */ + free((URI_CHAR *)uri->hostText.first); + uri->hostText.first = NULL; + uri->hostText.afterLast = NULL; + } + } + + /* NOTE: Port cannot happen! */ + + if (revertMask & URI_NORMALIZE_PATH) { + URI_TYPE(PathSegment) * walker = uri->pathHead; + while (walker != NULL) { + URI_TYPE(PathSegment) * const next = walker->next; + if (walker->text.afterLast > walker->text.first) { + free((URI_CHAR *)walker->text.first); + } + free(walker); + walker = next; + } + uri->pathHead = NULL; + uri->pathTail = NULL; + } + + if (revertMask & URI_NORMALIZE_QUERY) { + free((URI_CHAR *)uri->query.first); + uri->query.first = NULL; + uri->query.afterLast = NULL; + } + + if (revertMask & URI_NORMALIZE_FRAGMENT) { + free((URI_CHAR *)uri->fragment.first); + uri->fragment.first = NULL; + uri->fragment.afterLast = NULL; + } +} + + + +static URI_INLINE UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first, + const URI_CHAR * afterLast) { + if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { + const URI_CHAR * i = first; + for (; i < afterLast; i++) { + /* 6.2.2.1 Case Normalization: uppercase letters in scheme or host */ + if ((*i >= _UT('A')) && (*i <= _UT('Z'))) { + return URI_TRUE; + } + } + } + return URI_FALSE; +} + + + +static URI_INLINE UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first, + const URI_CHAR * afterLast) { + if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { + const URI_CHAR * i = first; + for (; i + 2 < afterLast; i++) { + if (i[0] == _UT('%')) { + /* 6.2.2.1 Case Normalization: * + * lowercase percent-encodings */ + if (((i[1] >= _UT('a')) && (i[1] <= _UT('f'))) + || ((i[2] >= _UT('a')) && (i[2] <= _UT('f')))) { + return URI_TRUE; + } else { + /* 6.2.2.2 Percent-Encoding Normalization: * + * percent-encoded unreserved characters */ + const unsigned char left = URI_FUNC(HexdigToInt)(i[1]); + const unsigned char right = URI_FUNC(HexdigToInt)(i[2]); + const int code = 16 * left + right; + if (uriIsUnreserved(code)) { + return URI_TRUE; + } + } + } + } + } + return URI_FALSE; +} + + + +static URI_INLINE void URI_FUNC(LowercaseInplace)(const URI_CHAR * first, + const URI_CHAR * afterLast) { + if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { + URI_CHAR * i = (URI_CHAR *)first; + const int lowerUpperDiff = (_UT('a') - _UT('A')); + for (; i < afterLast; i++) { + if ((*i >= _UT('A')) && (*i <=_UT('Z'))) { + *i = (URI_CHAR)(*i + lowerUpperDiff); + } + } + } +} + + + +static URI_INLINE UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first, + const URI_CHAR ** afterLast) { + int lenInChars; + const int lowerUpperDiff = (_UT('a') - _UT('A')); + URI_CHAR * buffer; + int i = 0; + + if ((first == NULL) || (afterLast == NULL) || (*first == NULL) + || (*afterLast == NULL)) { + return URI_FALSE; + } + + lenInChars = (int)(*afterLast - *first); + if (lenInChars == 0) { + return URI_TRUE; + } else if (lenInChars < 0) { + return URI_FALSE; + } + + buffer = malloc(lenInChars * sizeof(URI_CHAR)); + if (buffer == NULL) { + return URI_FALSE; + } + + for (; i < lenInChars; i++) { + if (((*first)[i] >= _UT('A')) && ((*first)[i] <=_UT('Z'))) { + buffer[i] = (URI_CHAR)((*first)[i] + lowerUpperDiff); + } else { + buffer[i] = (*first)[i]; + } + } + + *first = buffer; + *afterLast = buffer + lenInChars; + return URI_TRUE; +} + + + +/* NOTE: Implementation must stay inplace-compatible */ +static URI_INLINE void URI_FUNC(FixPercentEncodingEngine)( + const URI_CHAR * inFirst, const URI_CHAR * inAfterLast, + const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast) { + URI_CHAR * write = (URI_CHAR *)outFirst; + const int lenInChars = (int)(inAfterLast - inFirst); + int i = 0; + + /* All but last two */ + for (; i + 2 < lenInChars; i++) { + if (inFirst[i] != _UT('%')) { + write[0] = inFirst[i]; + write++; + } else { + /* 6.2.2.2 Percent-Encoding Normalization: * + * percent-encoded unreserved characters */ + const URI_CHAR one = inFirst[i + 1]; + const URI_CHAR two = inFirst[i + 2]; + const unsigned char left = URI_FUNC(HexdigToInt)(one); + const unsigned char right = URI_FUNC(HexdigToInt)(two); + const int code = 16 * left + right; + if (uriIsUnreserved(code)) { + write[0] = (URI_CHAR)(code); + write++; + } else { + /* 6.2.2.1 Case Normalization: * + * lowercase percent-encodings */ + write[0] = _UT('%'); + write[1] = URI_FUNC(HexToLetter)(left); + write[2] = URI_FUNC(HexToLetter)(right); + write += 3; + } + + i += 2; /* For the two chars of the percent group we just ate */ + } + } + + /* Last two */ + for (; i < lenInChars; i++) { + write[0] = inFirst[i]; + write++; + } + + *outAfterLast = write; +} + + + +static URI_INLINE void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first, + const URI_CHAR ** afterLast) { + /* Death checks */ + if ((first == NULL) || (afterLast == NULL) || (*afterLast == NULL)) { + return; + } + + /* Fix inplace */ + URI_FUNC(FixPercentEncodingEngine)(first, *afterLast, first, afterLast); +} + + + +static URI_INLINE UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first, + const URI_CHAR ** afterLast) { + int lenInChars; + URI_CHAR * buffer; + + /* Death checks */ + if ((first == NULL) || (afterLast == NULL) + || (*first == NULL) || (*afterLast == NULL)) { + return URI_FALSE; + } + + /* Old text length */ + lenInChars = (int)(*afterLast - *first); + if (lenInChars == 0) { + return URI_TRUE; + } else if (lenInChars < 0) { + return URI_FALSE; + } + + /* New buffer */ + buffer = malloc(lenInChars * sizeof(URI_CHAR)); + if (buffer == NULL) { + return URI_FALSE; + } + + /* Fix on copy */ + URI_FUNC(FixPercentEncodingEngine)(*first, *afterLast, buffer, afterLast); + *first = buffer; + return URI_TRUE; +} + + + +static URI_INLINE UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask, + unsigned int maskTest, URI_TYPE(TextRange) * range) { + if (((*doneMask & maskTest) == 0) + && (range->first != NULL) + && (range->afterLast != NULL) + && (range->afterLast > range->first)) { + const int lenInChars = (int)(range->afterLast - range->first); + const int lenInBytes = lenInChars * sizeof(URI_CHAR); + URI_CHAR * dup = malloc(lenInBytes); + if (dup == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + memcpy(dup, range->first, lenInBytes); + range->first = dup; + range->afterLast = dup + lenInChars; + *doneMask |= maskTest; + } + return URI_TRUE; +} + + + +static URI_INLINE UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri, + unsigned int * doneMask) { + URI_TYPE(PathSegment) * walker = uri->pathHead; + if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_SCHEME, + &(uri->scheme)) + || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_USER_INFO, + &(uri->userInfo)) + || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_QUERY, + &(uri->query)) + || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_FRAGMENT, + &(uri->fragment))) { + return URI_FALSE; /* Raises malloc error */ + } + + /* Host */ + if ((*doneMask & URI_NORMALIZE_HOST) == 0) { + if ((uri->hostData.ip4 == NULL) + && (uri->hostData.ip6 == NULL)) { + if (uri->hostData.ipFuture.first != NULL) { + /* IPvFuture */ + if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST, + &(uri->hostData.ipFuture))) { + return URI_FALSE; /* Raises malloc error */ + } + uri->hostText.first = uri->hostData.ipFuture.first; + uri->hostText.afterLast = uri->hostData.ipFuture.afterLast; + } else if (uri->hostText.first != NULL) { + /* Regname */ + if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST, + &(uri->hostText))) { + return URI_FALSE; /* Raises malloc error */ + } + } + } + } + + /* Path */ + if ((*doneMask & URI_NORMALIZE_PATH) == 0) { + while (walker != NULL) { + if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(walker->text))) { + /* Free allocations done so far and kill path */ + + /* Kill path to one before walker (if any) */ + URI_TYPE(PathSegment) * ranger = uri->pathHead; + while (ranger != walker) { + URI_TYPE(PathSegment) * const next = ranger->next; + if ((ranger->text.first != NULL) + && (ranger->text.afterLast != NULL) + && (ranger->text.afterLast > ranger->text.first)) { + free((URI_CHAR *)ranger->text.first); + free(ranger); + } + ranger = next; + } + + /* Kill path from walker */ + while (walker != NULL) { + URI_TYPE(PathSegment) * const next = walker->next; + free(walker); + walker = next; + } + + uri->pathHead = NULL; + uri->pathTail = NULL; + return URI_FALSE; /* Raises malloc error */ + } + walker = walker->next; + } + *doneMask |= URI_NORMALIZE_PATH; + } + + /* Port text, must come last so we don't have to undo that one if it fails. * + * Otherwise we would need and extra enum flag for it although the port * + * cannot go unnormalized... */ + if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(uri->portText))) { + return URI_FALSE; /* Raises malloc error */ + } + + return URI_TRUE; +} + + + +unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri) { + unsigned int res; +#if defined(__GNUC__) && ((__GNUC__ > 4) \ + || ((__GNUC__ == 4) && defined(__GNUC_MINOR__) && (__GNUC_MINOR__ >= 2))) + /* Slower code that fixes a warning, not sure if this is a smart idea */ + URI_TYPE(Uri) writeableClone; + memcpy(&writeableClone, uri, 1 * sizeof(URI_TYPE(Uri))); + URI_FUNC(NormalizeSyntaxEngine)(&writeableClone, 0, &res); +#else + URI_FUNC(NormalizeSyntaxEngine)((URI_TYPE(Uri) *)uri, 0, &res); +#endif + return res; +} + + + +int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask) { + return URI_FUNC(NormalizeSyntaxEngine)(uri, mask, NULL); +} + + + +int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri) { + return URI_FUNC(NormalizeSyntaxEx)(uri, (unsigned int)-1); +} + + + +static URI_INLINE int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, unsigned int * outMask) { + unsigned int doneMask = URI_NORMALIZED; + if (uri == NULL) { + if (outMask != NULL) { + *outMask = URI_NORMALIZED; + return URI_SUCCESS; + } else { + return URI_ERROR_NULL; + } + } + + if (outMask != NULL) { + /* Reset mask */ + *outMask = URI_NORMALIZED; + } else if (inMask == URI_NORMALIZED) { + /* Nothing to do */ + return URI_SUCCESS; + } + + /* Scheme, host */ + if (outMask != NULL) { + const UriBool normalizeScheme = URI_FUNC(ContainsUppercaseLetters)( + uri->scheme.first, uri->scheme.afterLast); + const UriBool normalizeHostCase = URI_FUNC(ContainsUppercaseLetters)( + uri->hostText.first, uri->hostText.afterLast); + if (normalizeScheme) { + *outMask |= URI_NORMALIZE_SCHEME; + } + + if (normalizeHostCase) { + *outMask |= URI_NORMALIZE_HOST; + } else { + const UriBool normalizeHostPrecent = URI_FUNC(ContainsUglyPercentEncoding)( + uri->hostText.first, uri->hostText.afterLast); + if (normalizeHostPrecent) { + *outMask |= URI_NORMALIZE_HOST; + } + } + } else { + /* Scheme */ + if ((inMask & URI_NORMALIZE_SCHEME) && (uri->scheme.first != NULL)) { + if (uri->owner) { + URI_FUNC(LowercaseInplace)(uri->scheme.first, uri->scheme.afterLast); + } else { + if (!URI_FUNC(LowercaseMalloc)(&(uri->scheme.first), &(uri->scheme.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_SCHEME; + } + } + + /* Host */ + if (inMask & URI_NORMALIZE_HOST) { + if (uri->hostData.ipFuture.first != NULL) { + /* IPvFuture */ + if (uri->owner) { + URI_FUNC(LowercaseInplace)(uri->hostData.ipFuture.first, + uri->hostData.ipFuture.afterLast); + } else { + if (!URI_FUNC(LowercaseMalloc)(&(uri->hostData.ipFuture.first), + &(uri->hostData.ipFuture.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_HOST; + } + uri->hostText.first = uri->hostData.ipFuture.first; + uri->hostText.afterLast = uri->hostData.ipFuture.afterLast; + } else if ((uri->hostText.first != NULL) + && (uri->hostData.ip4 == NULL) + && (uri->hostData.ip6 == NULL)) { + /* Regname */ + if (uri->owner) { + URI_FUNC(FixPercentEncodingInplace)(uri->hostText.first, + &(uri->hostText.afterLast)); + } else { + if (!URI_FUNC(FixPercentEncodingMalloc)( + &(uri->hostText.first), + &(uri->hostText.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_HOST; + } + + URI_FUNC(LowercaseInplace)(uri->hostText.first, + uri->hostText.afterLast); + } + } + } + + /* User info */ + if (outMask != NULL) { + const UriBool normalizeUserInfo = URI_FUNC(ContainsUglyPercentEncoding)( + uri->userInfo.first, uri->userInfo.afterLast); + if (normalizeUserInfo) { + *outMask |= URI_NORMALIZE_USER_INFO; + } + } else { + if ((inMask & URI_NORMALIZE_USER_INFO) && (uri->userInfo.first != NULL)) { + if (uri->owner) { + URI_FUNC(FixPercentEncodingInplace)(uri->userInfo.first, &(uri->userInfo.afterLast)); + } else { + if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->userInfo.first), + &(uri->userInfo.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_USER_INFO; + } + } + } + + /* Path */ + if (outMask != NULL) { + const URI_TYPE(PathSegment) * walker = uri->pathHead; + while (walker != NULL) { + const URI_CHAR * const first = walker->text.first; + const URI_CHAR * const afterLast = walker->text.afterLast; + if ((first != NULL) + && (afterLast != NULL) + && (afterLast > first) + && ( + (((afterLast - first) == 1) + && (first[0] == _UT('.'))) + || + (((afterLast - first) == 2) + && (first[0] == _UT('.')) + && (first[1] == _UT('.'))) + || + URI_FUNC(ContainsUglyPercentEncoding)(first, afterLast) + )) { + *outMask |= URI_NORMALIZE_PATH; + break; + } + walker = walker->next; + } + } else if (inMask & URI_NORMALIZE_PATH) { + URI_TYPE(PathSegment) * walker; + const UriBool relative = ((uri->scheme.first == NULL) + && !uri->absolutePath) ? URI_TRUE : URI_FALSE; + + /* Fix percent-encoding for each segment */ + walker = uri->pathHead; + if (uri->owner) { + while (walker != NULL) { + URI_FUNC(FixPercentEncodingInplace)(walker->text.first, &(walker->text.afterLast)); + walker = walker->next; + } + } else { + while (walker != NULL) { + if (!URI_FUNC(FixPercentEncodingMalloc)(&(walker->text.first), + &(walker->text.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + walker = walker->next; + } + doneMask |= URI_NORMALIZE_PATH; + } + + /* 6.2.2.3 Path Segment Normalization */ + if (!URI_FUNC(RemoveDotSegmentsEx)(uri, relative, + (uri->owner == URI_TRUE) + || ((doneMask & URI_NORMALIZE_PATH) != 0) + )) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + URI_FUNC(FixEmptyTrailSegment)(uri); + } + + /* Query, fragment */ + if (outMask != NULL) { + const UriBool normalizeQuery = URI_FUNC(ContainsUglyPercentEncoding)( + uri->query.first, uri->query.afterLast); + const UriBool normalizeFragment = URI_FUNC(ContainsUglyPercentEncoding)( + uri->fragment.first, uri->fragment.afterLast); + if (normalizeQuery) { + *outMask |= URI_NORMALIZE_QUERY; + } + + if (normalizeFragment) { + *outMask |= URI_NORMALIZE_FRAGMENT; + } + } else { + /* Query */ + if ((inMask & URI_NORMALIZE_QUERY) && (uri->query.first != NULL)) { + if (uri->owner) { + URI_FUNC(FixPercentEncodingInplace)(uri->query.first, &(uri->query.afterLast)); + } else { + if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->query.first), + &(uri->query.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_QUERY; + } + } + + /* Fragment */ + if ((inMask & URI_NORMALIZE_FRAGMENT) && (uri->fragment.first != NULL)) { + if (uri->owner) { + URI_FUNC(FixPercentEncodingInplace)(uri->fragment.first, &(uri->fragment.afterLast)); + } else { + if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->fragment.first), + &(uri->fragment.afterLast))) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + doneMask |= URI_NORMALIZE_FRAGMENT; + } + } + } + + /* Dup all not duped yet */ + if ((outMask == NULL) && !uri->owner) { + if (!URI_FUNC(MakeOwner)(uri, &doneMask)) { + URI_FUNC(PreventLeakage)(uri, doneMask); + return URI_ERROR_MALLOC; + } + uri->owner = URI_TRUE; + } + + return URI_SUCCESS; +} + + + +#endif diff --git a/plugins/uriparser/UriNormalizeBase.c b/plugins/uriparser/UriNormalizeBase.c new file mode 100644 index 0000000..bac5888 --- /dev/null +++ b/plugins/uriparser/UriNormalizeBase.c @@ -0,0 +1,119 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef URI_DOXYGEN +# include "UriNormalizeBase.h" +#endif + + + +UriBool uriIsUnreserved(int code) { + switch (code) { + case L'a': /* ALPHA */ + case L'A': + case L'b': + case L'B': + case L'c': + case L'C': + case L'd': + case L'D': + case L'e': + case L'E': + case L'f': + case L'F': + case L'g': + case L'G': + case L'h': + case L'H': + case L'i': + case L'I': + case L'j': + case L'J': + case L'k': + case L'K': + case L'l': + case L'L': + case L'm': + case L'M': + case L'n': + case L'N': + case L'o': + case L'O': + case L'p': + case L'P': + case L'q': + case L'Q': + case L'r': + case L'R': + case L's': + case L'S': + case L't': + case L'T': + case L'u': + case L'U': + case L'v': + case L'V': + case L'w': + case L'W': + case L'x': + case L'X': + case L'y': + case L'Y': + case L'z': + case L'Z': + case L'0': /* DIGIT */ + case L'1': + case L'2': + case L'3': + case L'4': + case L'5': + case L'6': + case L'7': + case L'8': + case L'9': + case L'-': /* "-" / "." / "_" / "~" */ + case L'.': + case L'_': + case L'~': + return URI_TRUE; + + default: + return URI_FALSE; + } +} diff --git a/plugins/uriparser/UriNormalizeBase.h b/plugins/uriparser/UriNormalizeBase.h new file mode 100644 index 0000000..9f3abd5 --- /dev/null +++ b/plugins/uriparser/UriNormalizeBase.h @@ -0,0 +1,53 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef URI_NORMALIZE_BASE_H +#define URI_NORMALIZE_BASE_H 1 + + + +#include + + + +UriBool uriIsUnreserved(int code); + + + +#endif /* URI_NORMALIZE_BASE_H */ diff --git a/plugins/uriparser/UriParse.c b/plugins/uriparser/UriParse.c new file mode 100644 index 0000000..e3cdc68 --- /dev/null +++ b/plugins/uriparser/UriParse.c @@ -0,0 +1,2241 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file UriParse.c + * Holds the RFC 3986 %URI parsing implementation. + * NOTE: This source file includes itself twice. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriParse.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriParse.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include +# include "UriCommon.h" +# include "UriParseBase.h" +#endif + + + +#define URI_SET_DIGIT \ + _UT('0'): \ + case _UT('1'): \ + case _UT('2'): \ + case _UT('3'): \ + case _UT('4'): \ + case _UT('5'): \ + case _UT('6'): \ + case _UT('7'): \ + case _UT('8'): \ + case _UT('9') + +#define URI_SET_HEX_LETTER_UPPER \ + _UT('A'): \ + case _UT('B'): \ + case _UT('C'): \ + case _UT('D'): \ + case _UT('E'): \ + case _UT('F') + +#define URI_SET_HEX_LETTER_LOWER \ + _UT('a'): \ + case _UT('b'): \ + case _UT('c'): \ + case _UT('d'): \ + case _UT('e'): \ + case _UT('f') + +#define URI_SET_HEXDIG \ + URI_SET_DIGIT: \ + case URI_SET_HEX_LETTER_UPPER: \ + case URI_SET_HEX_LETTER_LOWER + +#define URI_SET_ALPHA \ + URI_SET_HEX_LETTER_UPPER: \ + case URI_SET_HEX_LETTER_LOWER: \ + case _UT('g'): \ + case _UT('G'): \ + case _UT('h'): \ + case _UT('H'): \ + case _UT('i'): \ + case _UT('I'): \ + case _UT('j'): \ + case _UT('J'): \ + case _UT('k'): \ + case _UT('K'): \ + case _UT('l'): \ + case _UT('L'): \ + case _UT('m'): \ + case _UT('M'): \ + case _UT('n'): \ + case _UT('N'): \ + case _UT('o'): \ + case _UT('O'): \ + case _UT('p'): \ + case _UT('P'): \ + case _UT('q'): \ + case _UT('Q'): \ + case _UT('r'): \ + case _UT('R'): \ + case _UT('s'): \ + case _UT('S'): \ + case _UT('t'): \ + case _UT('T'): \ + case _UT('u'): \ + case _UT('U'): \ + case _UT('v'): \ + case _UT('V'): \ + case _UT('w'): \ + case _UT('W'): \ + case _UT('x'): \ + case _UT('X'): \ + case _UT('y'): \ + case _UT('Y'): \ + case _UT('z'): \ + case _UT('Z') + + + +static const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); +static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); + +static UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first); +static UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first); +static UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first); +static UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first); +static void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state); + +static void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state); + +static UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); + +static void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, const URI_CHAR * errorPos); +static void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state); + + + +static URI_INLINE void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, + const URI_CHAR * errorPos) { + URI_FUNC(FreeUriMembers)(state->uri); + state->errorPos = errorPos; + state->errorCode = URI_ERROR_SYNTAX; +} + + + +static URI_INLINE void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state) { + URI_FUNC(FreeUriMembers)(state->uri); + state->errorPos = NULL; + state->errorCode = URI_ERROR_MALLOC; +} + + + +/* + * [authority]-><[>[ipLit2][authorityTwo] + * [authority]->[ownHostUserInfoNz] + * [authority]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + /* "" regname host */ + state->uri->hostText.first = URI_FUNC(SafeToPointTo); + state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo); + return afterLast; + } + + switch (*first) { + case _UT('['): + { + const URI_CHAR * const afterIpLit2 + = URI_FUNC(ParseIpLit2)(state, first + 1, afterLast); + if (afterIpLit2 == NULL) { + return NULL; + } + state->uri->hostText.first = first + 1; /* HOST BEGIN */ + return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast); + } + + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + state->uri->userInfo.first = first; /* USERINFO BEGIN */ + return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast); + + default: + /* "" regname host */ + state->uri->hostText.first = URI_FUNC(SafeToPointTo); + state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo); + return first; + } +} + + + +/* + * [authorityTwo]-><:>[port] + * [authorityTwo]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT(':'): + { + const URI_CHAR * const afterPort = URI_FUNC(ParsePort)(state, first + 1, afterLast); + if (afterPort == NULL) { + return NULL; + } + state->uri->portText.first = first + 1; /* PORT BEGIN */ + state->uri->portText.afterLast = afterPort; /* PORT END */ + return afterPort; + } + + default: + return first; + } +} + + + +/* + * [hexZero]->[HEXDIG][hexZero] + * [hexZero]-> + */ +static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case URI_SET_HEXDIG: + return URI_FUNC(ParseHexZero)(state, first + 1, afterLast); + + default: + return first; + } +} + + + +/* + * [hierPart]->[pathRootless] + * [hierPart]->[partHelperTwo] + * [hierPart]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return URI_FUNC(ParsePathRootless)(state, first, afterLast); + + case _UT('/'): + return URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast); + + default: + return first; + } +} + + + +/* + * [ipFutLoop]->[subDelims][ipFutStopGo] + * [ipFutLoop]->[unreserved][ipFutStopGo] + * [ipFutLoop]-><:>[ipFutStopGo] + */ +static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return URI_FUNC(ParseIpFutStopGo)(state, first + 1, afterLast); + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +/* + * [ipFutStopGo]->[ipFutLoop] + * [ipFutStopGo]-> + */ +static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return URI_FUNC(ParseIpFutLoop)(state, first, afterLast); + + default: + return first; + } +} + + + +/* + * [ipFuture]->[HEXDIG][hexZero]<.>[ipFutLoop] + */ +static const URI_CHAR * URI_FUNC(ParseIpFuture)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + /* + First character has already been + checked before entering this rule. + + switch (*first) { + case _UT('v'): + */ + if (first + 1 >= afterLast) { + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; + } + + switch (first[1]) { + case URI_SET_HEXDIG: + { + const URI_CHAR * afterIpFutLoop; + const URI_CHAR * const afterHexZero + = URI_FUNC(ParseHexZero)(state, first + 2, afterLast); + if (afterHexZero == NULL) { + return NULL; + } + if ((afterHexZero >= afterLast) + || (*afterHexZero != _UT('.'))) { + URI_FUNC(StopSyntax)(state, afterHexZero); + return NULL; + } + state->uri->hostText.first = first; /* HOST BEGIN */ + state->uri->hostData.ipFuture.first = first; /* IPFUTURE BEGIN */ + afterIpFutLoop = URI_FUNC(ParseIpFutLoop)(state, afterHexZero + 1, afterLast); + if (afterIpFutLoop == NULL) { + return NULL; + } + state->uri->hostText.afterLast = afterIpFutLoop; /* HOST END */ + state->uri->hostData.ipFuture.afterLast = afterIpFutLoop; /* IPFUTURE END */ + return afterIpFutLoop; + } + + default: + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; + } + + /* + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + */ +} + + + +/* + * [ipLit2]->[ipFuture]<]> + * [ipLit2]->[IPv6address2] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('v'): + { + const URI_CHAR * const afterIpFuture + = URI_FUNC(ParseIpFuture)(state, first, afterLast); + if (afterIpFuture == NULL) { + return NULL; + } + if ((afterIpFuture >= afterLast) + || (*afterIpFuture != _UT(']'))) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + return afterIpFuture + 1; + } + + case _UT(':'): + case _UT(']'): + case URI_SET_HEXDIG: + state->uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); /* Freed when stopping on parse error */ + if (state->uri->hostData.ip6 == NULL) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParseIPv6address2)(state, first, afterLast); + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +/* + * [IPv6address2]->..<]> + */ +static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + int zipperEver = 0; + int quadsDone = 0; + int digitCount = 0; + unsigned char digitHistory[4]; + int ip4OctetsDone = 0; + + unsigned char quadsAfterZipper[14]; + int quadsAfterZipperCount = 0; + + + for (;;) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + /* Inside IPv4 part? */ + if (ip4OctetsDone > 0) { + /* Eat rest of IPv4 address */ + for (;;) { + switch (*first) { + case URI_SET_DIGIT: + if (digitCount == 4) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + digitHistory[digitCount++] = (unsigned char)(9 + *first - _UT('9')); + break; + + case _UT('.'): + if ((ip4OctetsDone == 4) /* NOTE! */ + || (digitCount == 0) + || (digitCount == 4)) { + /* Invalid digit or octet count */ + URI_FUNC(StopSyntax)(state, first); + return NULL; + } else if ((digitCount > 1) + && (digitHistory[0] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount); + return NULL; + } else if ((digitCount > 2) + && (digitHistory[1] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount + 1); + return NULL; + } else if ((digitCount == 3) + && (100 * digitHistory[0] + + 10 * digitHistory[1] + + digitHistory[2] > 255)) { + /* Octet value too large */ + if (digitHistory[0] > 2) { + URI_FUNC(StopSyntax)(state, first - 3); + } else if (digitHistory[1] > 5) { + URI_FUNC(StopSyntax)(state, first - 2); + } else { + URI_FUNC(StopSyntax)(state, first - 1); + } + return NULL; + } + + /* Copy IPv4 octet */ + state->uri->hostData.ip6->data[16 - 4 + ip4OctetsDone] = uriGetOctetValue(digitHistory, digitCount); + digitCount = 0; + ip4OctetsDone++; + break; + + case _UT(']'): + if ((ip4OctetsDone != 3) /* NOTE! */ + || (digitCount == 0) + || (digitCount == 4)) { + /* Invalid digit or octet count */ + URI_FUNC(StopSyntax)(state, first); + return NULL; + } else if ((digitCount > 1) + && (digitHistory[0] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount); + return NULL; + } else if ((digitCount > 2) + && (digitHistory[1] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount + 1); + return NULL; + } else if ((digitCount == 3) + && (100 * digitHistory[0] + + 10 * digitHistory[1] + + digitHistory[2] > 255)) { + /* Octet value too large */ + if (digitHistory[0] > 2) { + URI_FUNC(StopSyntax)(state, first - 3); + } else if (digitHistory[1] > 5) { + URI_FUNC(StopSyntax)(state, first - 2); + } else { + URI_FUNC(StopSyntax)(state, first - 1); + } + return NULL; + } + + state->uri->hostText.afterLast = first; /* HOST END */ + + /* Copy missing quads right before IPv4 */ + memcpy(state->uri->hostData.ip6->data + 16 - 4 - 2 * quadsAfterZipperCount, + quadsAfterZipper, 2 * quadsAfterZipperCount); + + /* Copy last IPv4 octet */ + state->uri->hostData.ip6->data[16 - 4 + 3] = uriGetOctetValue(digitHistory, digitCount); + + return first + 1; + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + first++; + } + } else { + /* Eat while no dot in sight */ + int letterAmong = 0; + int walking = 1; + do { + switch (*first) { + case URI_SET_HEX_LETTER_LOWER: + letterAmong = 1; + if (digitCount == 4) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('f')); + digitCount++; + break; + + case URI_SET_HEX_LETTER_UPPER: + letterAmong = 1; + if (digitCount == 4) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('F')); + digitCount++; + break; + + case URI_SET_DIGIT: + if (digitCount == 4) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + digitHistory[digitCount] = (unsigned char)(9 + *first - _UT('9')); + digitCount++; + break; + + case _UT(':'): + { + int setZipper = 0; + + if (digitCount > 0) { + if (zipperEver) { + uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount); + quadsAfterZipperCount++; + } else { + uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone); + } + quadsDone++; + digitCount = 0; + } + letterAmong = 0; + + /* Too many quads? */ + if (quadsDone >= 8 - zipperEver) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + /* "::"? */ + if (first + 1 >= afterLast) { + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; + } + if (first[1] == _UT(':')) { + const int resetOffset = 2 * (quadsDone + (digitCount > 0)); + + first++; + if (zipperEver) { + URI_FUNC(StopSyntax)(state, first); + return NULL; /* "::.+::" */ + } + + /* Zero everything after zipper */ + memset(state->uri->hostData.ip6->data + resetOffset, 0, 16 - resetOffset); + setZipper = 1; + + /* ":::+"? */ + if (first + 1 >= afterLast) { + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; /* No ']' yet */ + } + if (first[1] == _UT(':')) { + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; /* ":::+ "*/ + } + } + + if (setZipper) { + zipperEver = 1; + } + } + break; + + case _UT('.'): + if ((quadsDone > 6) /* NOTE */ + || (!zipperEver && (quadsDone < 6)) + || letterAmong + || (digitCount == 0) + || (digitCount == 4)) { + /* Invalid octet before */ + URI_FUNC(StopSyntax)(state, first); + return NULL; + } else if ((digitCount > 1) + && (digitHistory[0] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount); + return NULL; + } else if ((digitCount > 2) + && (digitHistory[1] == 0)) { + /* Leading zero */ + URI_FUNC(StopSyntax)(state, first - digitCount + 1); + return NULL; + } else if ((digitCount == 3) + && (100 * digitHistory[0] + + 10 * digitHistory[1] + + digitHistory[2] > 255)) { + /* Octet value too large */ + if (digitHistory[0] > 2) { + URI_FUNC(StopSyntax)(state, first - 3); + } else if (digitHistory[1] > 5) { + URI_FUNC(StopSyntax)(state, first - 2); + } else { + URI_FUNC(StopSyntax)(state, first - 1); + } + return NULL; + } + + /* Copy first IPv4 octet */ + state->uri->hostData.ip6->data[16 - 4] = uriGetOctetValue(digitHistory, digitCount); + digitCount = 0; + + /* Switch over to IPv4 loop */ + ip4OctetsDone = 1; + walking = 0; + break; + + case _UT(']'): + /* Too little quads? */ + if (!zipperEver && !((quadsDone == 7) && (digitCount > 0))) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + if (digitCount > 0) { + if (zipperEver) { + uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount); + quadsAfterZipperCount++; + } else { + uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone); + } + /* + quadsDone++; + digitCount = 0; + */ + } + + /* Copy missing quads to the end */ + memcpy(state->uri->hostData.ip6->data + 16 - 2 * quadsAfterZipperCount, + quadsAfterZipper, 2 * quadsAfterZipperCount); + + state->uri->hostText.afterLast = first; /* HOST END */ + return first + 1; /* Fine */ + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + first++; + + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; /* No ']' yet */ + } + } while (walking); + } + } +} + + + +/* + * [mustBeSegmentNzNc]->[pctEncoded][mustBeSegmentNzNc] + * [mustBeSegmentNzNc]->[subDelims][mustBeSegmentNzNc] + * [mustBeSegmentNzNc]->[unreserved][mustBeSegmentNzNc] + * [mustBeSegmentNzNc]->[uriTail] // can take + * [mustBeSegmentNzNc]->[segment][zeroMoreSlashSegs][uriTail] + * [mustBeSegmentNzNc]-><@>[mustBeSegmentNzNc] + */ +static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + state->uri->scheme.first = NULL; /* Not a scheme, reset */ + return afterLast; + } + + switch (*first) { + case _UT('%'): + { + const URI_CHAR * const afterPctEncoded + = URI_FUNC(ParsePctEncoded)(state, first, afterLast); + if (afterPctEncoded == NULL) { + return NULL; + } + return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); + } + + case _UT('@'): + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT(','): + case _UT(';'): + case _UT('\''): + case _UT('+'): + case _UT('='): + case _UT('-'): + case _UT('.'): + case _UT('_'): + case _UT('~'): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); + + case _UT('/'): + { + const URI_CHAR * afterZeroMoreSlashSegs; + const URI_CHAR * afterSegment; + if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + state->uri->scheme.first = NULL; /* Not a scheme, reset */ + afterSegment = URI_FUNC(ParseSegment)(state, first + 1, afterLast); + if (afterSegment == NULL) { + return NULL; + } + if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + afterZeroMoreSlashSegs + = URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); + if (afterZeroMoreSlashSegs == NULL) { + return NULL; + } + return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast); + } + + default: + if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + state->uri->scheme.first = NULL; /* Not a scheme, reset */ + return URI_FUNC(ParseUriTail)(state, first, afterLast); + } +} + + + +/* + * [ownHost]-><[>[ipLit2][authorityTwo] + * [ownHost]->[ownHost2] // can take + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('['): + { + const URI_CHAR * const afterIpLit2 + = URI_FUNC(ParseIpLit2)(state, first + 1, afterLast); + if (afterIpLit2 == NULL) { + return NULL; + } + state->uri->hostText.first = first + 1; /* HOST BEGIN */ + return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast); + } + + default: + return URI_FUNC(ParseOwnHost2)(state, first, afterLast); + } +} + + + +static URI_INLINE UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { + state->uri->hostText.afterLast = first; /* HOST END */ + + /* Valid IPv4 or just a regname? */ + state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ + if (state->uri->hostData.ip4 == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, + state->uri->hostText.first, state->uri->hostText.afterLast)) { + /* Not IPv4 */ + free(state->uri->hostData.ip4); + state->uri->hostData.ip4 = NULL; + } + return URI_TRUE; /* Success */ +} + + + +/* + * [ownHost2]->[authorityTwo] // can take + * [ownHost2]->[pctSubUnres][ownHost2] + */ +static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + if (!URI_FUNC(OnExitOwnHost2)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(';'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterPctSubUnres + = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); + if (afterPctSubUnres == NULL) { + return NULL; + } + return URI_FUNC(ParseOwnHost2)(state, afterPctSubUnres, afterLast); + } + + default: + if (!URI_FUNC(OnExitOwnHost2)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParseAuthorityTwo)(state, first, afterLast); + } +} + + + +static URI_INLINE UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { + state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */ + state->uri->userInfo.first = NULL; /* Not a userInfo, reset */ + state->uri->hostText.afterLast = first; /* HOST END */ + + /* Valid IPv4 or just a regname? */ + state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ + if (state->uri->hostData.ip4 == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, + state->uri->hostText.first, state->uri->hostText.afterLast)) { + /* Not IPv4 */ + free(state->uri->hostData.ip4); + state->uri->hostData.ip4 = NULL; + } + return URI_TRUE; /* Success */ +} + + + +/* + * [ownHostUserInfo]->[ownHostUserInfoNz] + * [ownHostUserInfo]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast); + + default: + if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return first; + } +} + + + +/* + * [ownHostUserInfoNz]->[pctSubUnres][ownHostUserInfo] + * [ownHostUserInfoNz]-><:>[ownPortUserInfo] + * [ownHostUserInfoNz]-><@>[ownHost] + */ +static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(';'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterPctSubUnres + = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); + if (afterPctSubUnres == NULL) { + return NULL; + } + return URI_FUNC(ParseOwnHostUserInfo)(state, afterPctSubUnres, afterLast); + } + + case _UT(':'): + state->uri->hostText.afterLast = first; /* HOST END */ + state->uri->portText.first = first + 1; /* PORT BEGIN */ + return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast); + + case _UT('@'): + state->uri->userInfo.afterLast = first; /* USERINFO END */ + state->uri->hostText.first = first + 1; /* HOST BEGIN */ + return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +static URI_INLINE UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { + state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */ + state->uri->userInfo.first = NULL; /* Not a userInfo, reset */ + state->uri->portText.afterLast = first; /* PORT END */ + + /* Valid IPv4 or just a regname? */ + state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ + if (state->uri->hostData.ip4 == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, + state->uri->hostText.first, state->uri->hostText.afterLast)) { + /* Not IPv4 */ + free(state->uri->hostData.ip4); + state->uri->hostData.ip4 = NULL; + } + return URI_TRUE; /* Success */ +} + + + +/* + * [ownPortUserInfo]->[ALPHA][ownUserInfo] + * [ownPortUserInfo]->[DIGIT][ownPortUserInfo] + * [ownPortUserInfo]-><.>[ownUserInfo] + * [ownPortUserInfo]-><_>[ownUserInfo] + * [ownPortUserInfo]-><~>[ownUserInfo] + * [ownPortUserInfo]-><->[ownUserInfo] + * [ownPortUserInfo]->[subDelims][ownUserInfo] + * [ownPortUserInfo]->[pctEncoded][ownUserInfo] + * [ownPortUserInfo]-><:>[ownUserInfo] + * [ownPortUserInfo]-><@>[ownHost] + * [ownPortUserInfo]-> + */ +static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return afterLast; + } + + switch (*first) { + /* begin sub-delims */ + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('\''): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT('+'): + case _UT(','): + case _UT(';'): + case _UT('='): + /* end sub-delims */ + /* begin unreserved (except alpha and digit) */ + case _UT('-'): + case _UT('.'): + case _UT('_'): + case _UT('~'): + /* end unreserved (except alpha and digit) */ + case _UT(':'): + case URI_SET_ALPHA: + state->uri->hostText.afterLast = NULL; /* Not a host, reset */ + state->uri->portText.first = NULL; /* Not a port, reset */ + return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast); + + case URI_SET_DIGIT: + return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast); + + case _UT('%'): + state->uri->portText.first = NULL; /* Not a port, reset */ + { + const URI_CHAR * const afterPct + = URI_FUNC(ParsePctEncoded)(state, first, afterLast); + if (afterPct == NULL) { + return NULL; + } + return URI_FUNC(ParseOwnUserInfo)(state, afterPct, afterLast); + } + + case _UT('@'): + state->uri->hostText.afterLast = NULL; /* Not a host, reset */ + state->uri->portText.first = NULL; /* Not a port, reset */ + state->uri->userInfo.afterLast = first; /* USERINFO END */ + state->uri->hostText.first = first + 1; /* HOST BEGIN */ + return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); + + default: + if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return first; + } +} + + + +/* + * [ownUserInfo]->[pctSubUnres][ownUserInfo] + * [ownUserInfo]-><:>[ownUserInfo] + * [ownUserInfo]-><@>[ownHost] + */ +static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(';'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterPctSubUnres + = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); + if (afterPctSubUnres == NULL) { + return NULL; + } + return URI_FUNC(ParseOwnUserInfo)(state, afterPctSubUnres, afterLast); + } + + case _UT(':'): + return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast); + + case _UT('@'): + /* SURE */ + state->uri->userInfo.afterLast = first; /* USERINFO END */ + state->uri->hostText.first = first + 1; /* HOST BEGIN */ + return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +static URI_INLINE void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state) { + state->uri->absolutePath = URI_TRUE; +} + + + +/* + * [partHelperTwo]->[pathAbsNoLeadSlash] // can take + * [partHelperTwo]->[authority][pathAbsEmpty] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(OnExitPartHelperTwo)(state); + return afterLast; + } + + switch (*first) { + case _UT('/'): + { + const URI_CHAR * const afterAuthority + = URI_FUNC(ParseAuthority)(state, first + 1, afterLast); + const URI_CHAR * afterPathAbsEmpty; + if (afterAuthority == NULL) { + return NULL; + } + afterPathAbsEmpty = URI_FUNC(ParsePathAbsEmpty)(state, afterAuthority, afterLast); + + URI_FUNC(FixEmptyTrailSegment)(state->uri); + + return afterPathAbsEmpty; + } + + default: + URI_FUNC(OnExitPartHelperTwo)(state); + return URI_FUNC(ParsePathAbsNoLeadSlash)(state, first, afterLast); + } +} + + + +/* + * [pathAbsEmpty]->[segment][pathAbsEmpty] + * [pathAbsEmpty]-> + */ +static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('/'): + { + const URI_CHAR * const afterSegment + = URI_FUNC(ParseSegment)(state, first + 1, afterLast); + if (afterSegment == NULL) { + return NULL; + } + if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParsePathAbsEmpty)(state, afterSegment, afterLast); + } + + default: + return first; + } +} + + + +/* + * [pathAbsNoLeadSlash]->[segmentNz][zeroMoreSlashSegs] + * [pathAbsNoLeadSlash]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterSegmentNz + = URI_FUNC(ParseSegmentNz)(state, first, afterLast); + if (afterSegmentNz == NULL) { + return NULL; + } + if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast); + } + + default: + return first; + } +} + + + +/* + * [pathRootless]->[segmentNz][zeroMoreSlashSegs] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + const URI_CHAR * const afterSegmentNz + = URI_FUNC(ParseSegmentNz)(state, first, afterLast); + if (afterSegmentNz == NULL) { + return NULL; + } else { + if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + } + return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast); +} + + + +/* + * [pchar]->[pctEncoded] + * [pchar]->[subDelims] + * [pchar]->[unreserved] + * [pchar]-><:> + * [pchar]-><@> + */ +static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('%'): + return URI_FUNC(ParsePctEncoded)(state, first, afterLast); + + case _UT(':'): + case _UT('@'): + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT(','): + case _UT(';'): + case _UT('\''): + case _UT('+'): + case _UT('='): + case _UT('-'): + case _UT('.'): + case _UT('_'): + case _UT('~'): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return first + 1; + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +/* + * [pctEncoded]-><%>[HEXDIG][HEXDIG] + */ +static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + /* + First character has already been + checked before entering this rule. + + switch (*first) { + case _UT('%'): + */ + if (first + 1 >= afterLast) { + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; + } + + switch (first[1]) { + case URI_SET_HEXDIG: + if (first + 2 >= afterLast) { + URI_FUNC(StopSyntax)(state, first + 2); + return NULL; + } + + switch (first[2]) { + case URI_SET_HEXDIG: + return first + 3; + + default: + URI_FUNC(StopSyntax)(state, first + 2); + return NULL; + } + + default: + URI_FUNC(StopSyntax)(state, first + 1); + return NULL; + } + + /* + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + */ +} + + + +/* + * [pctSubUnres]->[pctEncoded] + * [pctSubUnres]->[subDelims] + * [pctSubUnres]->[unreserved] + */ +static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + URI_FUNC(StopSyntax)(state, first); + return NULL; + } + + switch (*first) { + case _UT('%'): + return URI_FUNC(ParsePctEncoded)(state, first, afterLast); + + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT(','): + case _UT(';'): + case _UT('\''): + case _UT('+'): + case _UT('='): + case _UT('-'): + case _UT('.'): + case _UT('_'): + case _UT('~'): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + return first + 1; + + default: + URI_FUNC(StopSyntax)(state, first); + return NULL; + } +} + + + +/* + * [port]->[DIGIT][port] + * [port]-> + */ +static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case URI_SET_DIGIT: + return URI_FUNC(ParsePort)(state, first + 1, afterLast); + + default: + return first; + } +} + + + +/* + * [queryFrag]->[pchar][queryFrag] + * [queryFrag]->[queryFrag] + * [queryFrag]->[queryFrag] + * [queryFrag]-> + */ +static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterPchar + = URI_FUNC(ParsePchar)(state, first, afterLast); + if (afterPchar == NULL) { + return NULL; + } + return URI_FUNC(ParseQueryFrag)(state, afterPchar, afterLast); + } + + case _UT('/'): + case _UT('?'): + return URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); + + default: + return first; + } +} + + + +/* + * [segment]->[pchar][segment] + * [segment]-> + */ +static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('!'): + case _UT('$'): + case _UT('%'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('-'): + case _UT('*'): + case _UT(','): + case _UT('.'): + case _UT(':'): + case _UT(';'): + case _UT('@'): + case _UT('\''): + case _UT('_'): + case _UT('~'): + case _UT('+'): + case _UT('='): + case URI_SET_DIGIT: + case URI_SET_ALPHA: + { + const URI_CHAR * const afterPchar + = URI_FUNC(ParsePchar)(state, first, afterLast); + if (afterPchar == NULL) { + return NULL; + } + return URI_FUNC(ParseSegment)(state, afterPchar, afterLast); + } + + default: + return first; + } +} + + + +/* + * [segmentNz]->[pchar][segment] + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + const URI_CHAR * const afterPchar + = URI_FUNC(ParsePchar)(state, first, afterLast); + if (afterPchar == NULL) { + return NULL; + } + return URI_FUNC(ParseSegment)(state, afterPchar, afterLast); +} + + + +static URI_INLINE UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { + if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ + return URI_FALSE; /* Raises malloc error*/ + } + state->uri->scheme.first = NULL; /* Not a scheme, reset */ + return URI_TRUE; /* Success */ +} + + + +/* + * [segmentNzNcOrScheme2]->[ALPHA][segmentNzNcOrScheme2] + * [segmentNzNcOrScheme2]->[DIGIT][segmentNzNcOrScheme2] + * [segmentNzNcOrScheme2]->[pctEncoded][mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]->[uriTail] // can take + * [segmentNzNcOrScheme2]->[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><$>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><&>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><(>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><)>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><*>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><,>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><.>[segmentNzNcOrScheme2] + * [segmentNzNcOrScheme2]->[segment][zeroMoreSlashSegs][uriTail] + * [segmentNzNcOrScheme2]-><:>[hierPart][uriTail] + * [segmentNzNcOrScheme2]-><;>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><@>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><_>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><~>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><+>[segmentNzNcOrScheme2] + * [segmentNzNcOrScheme2]-><=>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><'>[mustBeSegmentNzNc] + * [segmentNzNcOrScheme2]-><->[segmentNzNcOrScheme2] + */ +static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return afterLast; + } + + switch (*first) { + case _UT('.'): + case _UT('+'): + case _UT('-'): + case URI_SET_ALPHA: + case URI_SET_DIGIT: + return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast); + + case _UT('%'): + { + const URI_CHAR * const afterPctEncoded + = URI_FUNC(ParsePctEncoded)(state, first, afterLast); + if (afterPctEncoded == NULL) { + return NULL; + } + return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); + } + + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT(','): + case _UT(';'): + case _UT('@'): + case _UT('_'): + case _UT('~'): + case _UT('='): + case _UT('\''): + return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); + + case _UT('/'): + { + const URI_CHAR * afterZeroMoreSlashSegs; + const URI_CHAR * const afterSegment + = URI_FUNC(ParseSegment)(state, first + 1, afterLast); + if (afterSegment == NULL) { + return NULL; + } + if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + state->uri->scheme.first = NULL; /* Not a scheme, reset */ + if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + afterZeroMoreSlashSegs + = URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); + if (afterZeroMoreSlashSegs == NULL) { + return NULL; + } + return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast); + } + + case _UT(':'): + { + const URI_CHAR * const afterHierPart + = URI_FUNC(ParseHierPart)(state, first + 1, afterLast); + state->uri->scheme.afterLast = first; /* SCHEME END */ + if (afterHierPart == NULL) { + return NULL; + } + return URI_FUNC(ParseUriTail)(state, afterHierPart, afterLast); + } + + default: + if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) { + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParseUriTail)(state, first, afterLast); + } +} + + + +/* + * [uriReference]->[ALPHA][segmentNzNcOrScheme2] + * [uriReference]->[DIGIT][mustBeSegmentNzNc] + * [uriReference]->[pctEncoded][mustBeSegmentNzNc] + * [uriReference]->[subDelims][mustBeSegmentNzNc] + * [uriReference]->[uriTail] // can take + * [uriReference]-><.>[mustBeSegmentNzNc] + * [uriReference]->[partHelperTwo][uriTail] + * [uriReference]-><@>[mustBeSegmentNzNc] + * [uriReference]-><_>[mustBeSegmentNzNc] + * [uriReference]-><~>[mustBeSegmentNzNc] + * [uriReference]-><->[mustBeSegmentNzNc] + */ +static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case URI_SET_ALPHA: + state->uri->scheme.first = first; /* SCHEME BEGIN */ + return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast); + + case URI_SET_DIGIT: + case _UT('!'): + case _UT('$'): + case _UT('&'): + case _UT('('): + case _UT(')'): + case _UT('*'): + case _UT(','): + case _UT(';'): + case _UT('\''): + case _UT('+'): + case _UT('='): + case _UT('.'): + case _UT('_'): + case _UT('~'): + case _UT('-'): + case _UT('@'): + state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */ + return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); + + case _UT('%'): + { + const URI_CHAR * const afterPctEncoded + = URI_FUNC(ParsePctEncoded)(state, first, afterLast); + if (afterPctEncoded == NULL) { + return NULL; + } + state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */ + return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); + } + + case _UT('/'): + { + const URI_CHAR * const afterPartHelperTwo + = URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast); + if (afterPartHelperTwo == NULL) { + return NULL; + } + return URI_FUNC(ParseUriTail)(state, afterPartHelperTwo, afterLast); + } + + default: + return URI_FUNC(ParseUriTail)(state, first, afterLast); + } +} + + + +/* + * [uriTail]-><#>[queryFrag] + * [uriTail]->[queryFrag][uriTailTwo] + * [uriTail]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('#'): + { + const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); + if (afterQueryFrag == NULL) { + return NULL; + } + state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */ + state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */ + return afterQueryFrag; + } + + case _UT('?'): + { + const URI_CHAR * const afterQueryFrag + = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); + if (afterQueryFrag == NULL) { + return NULL; + } + state->uri->query.first = first + 1; /* QUERY BEGIN */ + state->uri->query.afterLast = afterQueryFrag; /* QUERY END */ + return URI_FUNC(ParseUriTailTwo)(state, afterQueryFrag, afterLast); + } + + default: + return first; + } +} + + + +/* + * [uriTailTwo]-><#>[queryFrag] + * [uriTailTwo]-> + */ +static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('#'): + { + const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); + if (afterQueryFrag == NULL) { + return NULL; + } + state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */ + state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */ + return afterQueryFrag; + } + + default: + return first; + } +} + + + +/* + * [zeroMoreSlashSegs]->[segment][zeroMoreSlashSegs] + * [zeroMoreSlashSegs]-> + */ +static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + if (first >= afterLast) { + return afterLast; + } + + switch (*first) { + case _UT('/'): + { + const URI_CHAR * const afterSegment + = URI_FUNC(ParseSegment)(state, first + 1, afterLast); + if (afterSegment == NULL) { + return NULL; + } + if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ + URI_FUNC(StopMalloc)(state); + return NULL; + } + return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); + } + + default: + return first; + } +} + + + +static URI_INLINE void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state) { + URI_TYPE(Uri) * const uriBackup = state->uri; + memset(state, 0, sizeof(URI_TYPE(ParserState))); + state->uri = uriBackup; +} + + + +static URI_INLINE UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); + if (segment == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + memset(segment, 0, sizeof(URI_TYPE(PathSegment))); + if (first == afterLast) { + segment->text.first = URI_FUNC(SafeToPointTo); + segment->text.afterLast = URI_FUNC(SafeToPointTo); + } else { + segment->text.first = first; + segment->text.afterLast = afterLast; + } + + /* First segment ever? */ + if (state->uri->pathHead == NULL) { + /* First segment ever, set head and tail */ + state->uri->pathHead = segment; + state->uri->pathTail = segment; + } else { + /* Append, update tail */ + state->uri->pathTail->next = segment; + state->uri->pathTail = segment; + } + + return URI_TRUE; /* Success */ +} + + + +int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { + const URI_CHAR * afterUriReference; + URI_TYPE(Uri) * uri; + + /* Check params */ + if ((state == NULL) || (first == NULL) || (afterLast == NULL)) { + return URI_ERROR_NULL; + } + uri = state->uri; + + /* Init parser */ + URI_FUNC(ResetParserState)(state); + URI_FUNC(ResetUri)(uri); + + /* Parse */ + afterUriReference = URI_FUNC(ParseUriReference)(state, first, afterLast); + if (afterUriReference == NULL) { + return state->errorCode; + } + if (afterUriReference != afterLast) { + URI_FUNC(StopSyntax)(state, afterUriReference); + return state->errorCode; + } + return URI_SUCCESS; +} + + + +int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, const URI_CHAR * text) { + if ((state == NULL) || (text == NULL)) { + return URI_ERROR_NULL; + } + return URI_FUNC(ParseUriEx)(state, text, text + URI_STRLEN(text)); +} + + + +void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri) { + if (uri == NULL) { + return; + } + + if (uri->owner) { + /* Scheme */ + if (uri->scheme.first != NULL) { + if (uri->scheme.first != uri->scheme.afterLast) { + free((URI_CHAR *)uri->scheme.first); + } + uri->scheme.first = NULL; + uri->scheme.afterLast = NULL; + } + + /* User info */ + if (uri->userInfo.first != NULL) { + if (uri->userInfo.first != uri->userInfo.afterLast) { + free((URI_CHAR *)uri->userInfo.first); + } + uri->userInfo.first = NULL; + uri->userInfo.afterLast = NULL; + } + + /* Host data - IPvFuture */ + if (uri->hostData.ipFuture.first != NULL) { + if (uri->hostData.ipFuture.first != uri->hostData.ipFuture.afterLast) { + free((URI_CHAR *)uri->hostData.ipFuture.first); + } + uri->hostData.ipFuture.first = NULL; + uri->hostData.ipFuture.afterLast = NULL; + uri->hostText.first = NULL; + uri->hostText.afterLast = NULL; + } + + /* Host text (if regname, after IPvFuture!) */ + if ((uri->hostText.first != NULL) + && (uri->hostData.ip4 == NULL) + && (uri->hostData.ip6 == NULL)) { + /* Real regname */ + if (uri->hostText.first != uri->hostText.afterLast) { + free((URI_CHAR *)uri->hostText.first); + } + uri->hostText.first = NULL; + uri->hostText.afterLast = NULL; + } + } + + /* Host data - IPv4 */ + if (uri->hostData.ip4 != NULL) { + free(uri->hostData.ip4); + uri->hostData.ip4 = NULL; + } + + /* Host data - IPv6 */ + if (uri->hostData.ip6 != NULL) { + free(uri->hostData.ip6); + uri->hostData.ip6 = NULL; + } + + /* Port text */ + if (uri->owner && (uri->portText.first != NULL)) { + if (uri->portText.first != uri->portText.afterLast) { + free((URI_CHAR *)uri->portText.first); + } + uri->portText.first = NULL; + uri->portText.afterLast = NULL; + } + + /* Path */ + if (uri->pathHead != NULL) { + URI_TYPE(PathSegment) * segWalk = uri->pathHead; + while (segWalk != NULL) { + URI_TYPE(PathSegment) * const next = segWalk->next; + if (uri->owner && (segWalk->text.first != NULL) + && (segWalk->text.first < segWalk->text.afterLast)) { + free((URI_CHAR *)segWalk->text.first); + } + free(segWalk); + segWalk = next; + } + uri->pathHead = NULL; + uri->pathTail = NULL; + } + + if (uri->owner) { + /* Query */ + if (uri->query.first != NULL) { + if (uri->query.first != uri->query.afterLast) { + free((URI_CHAR *)uri->query.first); + } + uri->query.first = NULL; + uri->query.afterLast = NULL; + } + + /* Fragment */ + if (uri->fragment.first != NULL) { + if (uri->fragment.first != uri->fragment.afterLast) { + free((URI_CHAR *)uri->fragment.first); + } + uri->fragment.first = NULL; + uri->fragment.afterLast = NULL; + } + } +} + + + +UriBool URI_FUNC(_TESTING_ONLY_ParseIpSix)(const URI_CHAR * text) { + URI_TYPE(Uri) uri; + URI_TYPE(ParserState) parser; + const URI_CHAR * const afterIpSix = text + URI_STRLEN(text); + const URI_CHAR * res; + + URI_FUNC(ResetParserState)(&parser); + URI_FUNC(ResetUri)(&uri); + parser.uri = &uri; + parser.uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); + res = URI_FUNC(ParseIPv6address2)(&parser, text, afterIpSix); + URI_FUNC(FreeUriMembers)(&uri); + return res == afterIpSix ? URI_TRUE : URI_FALSE; +} + + + +UriBool URI_FUNC(_TESTING_ONLY_ParseIpFour)(const URI_CHAR * text) { + unsigned char octets[4]; + int res = URI_FUNC(ParseIpFourAddress)(octets, text, text + URI_STRLEN(text)); + return (res == URI_SUCCESS) ? URI_TRUE : URI_FALSE; +} + + + +#undef URI_SET_DIGIT +#undef URI_SET_HEX_LETTER_UPPER +#undef URI_SET_HEX_LETTER_LOWER +#undef URI_SET_HEXDIG +#undef URI_SET_ALPHA + + + +#endif diff --git a/plugins/uriparser/UriParseBase.c b/plugins/uriparser/UriParseBase.c new file mode 100644 index 0000000..75e4761 --- /dev/null +++ b/plugins/uriparser/UriParseBase.c @@ -0,0 +1,90 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef URI_DOXYGEN +# include "UriParseBase.h" +#endif + + + +void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, unsigned char * output) { + switch (digitCount) { + case 1: + /* 0x___? -> \x00 \x0? */ + output[0] = 0; + output[1] = hexDigits[0]; + break; + + case 2: + /* 0x__?? -> \0xx \x?? */ + output[0] = 0; + output[1] = 16 * hexDigits[0] + hexDigits[1]; + break; + + case 3: + /* 0x_??? -> \0x? \x?? */ + output[0] = hexDigits[0]; + output[1] = 16 * hexDigits[1] + hexDigits[2]; + break; + + case 4: + /* 0x???? -> \0?? \x?? */ + output[0] = 16 * hexDigits[0] + hexDigits[1]; + output[1] = 16 * hexDigits[2] + hexDigits[3]; + break; + + } +} + + + +unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount) { + switch (digitCount) { + case 1: + return digits[0]; + + case 2: + return 10 * digits[0] + digits[1]; + + case 3: + default: + return 100 * digits[0] + 10 * digits[1] + digits[2]; + + } +} diff --git a/plugins/uriparser/UriParseBase.h b/plugins/uriparser/UriParseBase.h new file mode 100644 index 0000000..dea5c81 --- /dev/null +++ b/plugins/uriparser/UriParseBase.h @@ -0,0 +1,55 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef URI_PARSE_BASE_H +#define URI_PARSE_BASE_H 1 + + + +#include + + + +void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, + unsigned char * output); +unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount); + + + +#endif /* URI_PARSE_BASE_H */ diff --git a/plugins/uriparser/UriQuery.c b/plugins/uriparser/UriQuery.c new file mode 100644 index 0000000..7adb073 --- /dev/null +++ b/plugins/uriparser/UriQuery.c @@ -0,0 +1,460 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriQuery.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriQuery.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +static int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, + int maxChars, int * charsWritten, int * charsRequired, + UriBool spaceToPlus, UriBool normalizeBreaks); + +static UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext, + int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter, + const URI_CHAR * valueFirst, const URI_CHAR * valueAfter, + UriBool plusToSpace, UriBreakConversion breakConversion); + + + +int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList, + int * charsRequired) { + const UriBool spaceToPlus = URI_TRUE; + const UriBool normalizeBreaks = URI_TRUE; + + return URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, charsRequired, + spaceToPlus, normalizeBreaks); +} + + + +int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList, + int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks) { + if ((queryList == NULL) || (charsRequired == NULL)) { + return URI_ERROR_NULL; + } + + return URI_FUNC(ComposeQueryEngine)(NULL, queryList, 0, NULL, + charsRequired, spaceToPlus, normalizeBreaks); +} + + + +int URI_FUNC(ComposeQuery)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten) { + const UriBool spaceToPlus = URI_TRUE; + const UriBool normalizeBreaks = URI_TRUE; + + return URI_FUNC(ComposeQueryEx)(dest, queryList, maxChars, charsWritten, + spaceToPlus, normalizeBreaks); +} + + + +int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten, + UriBool spaceToPlus, UriBool normalizeBreaks) { + if ((dest == NULL) || (queryList == NULL)) { + return URI_ERROR_NULL; + } + + if (maxChars < 1) { + return URI_ERROR_OUTPUT_TOO_LARGE; + } + + return URI_FUNC(ComposeQueryEngine)(dest, queryList, maxChars, + charsWritten, NULL, spaceToPlus, normalizeBreaks); +} + + + +int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest, + const URI_TYPE(QueryList) * queryList) { + const UriBool spaceToPlus = URI_TRUE; + const UriBool normalizeBreaks = URI_TRUE; + + return URI_FUNC(ComposeQueryMallocEx)(dest, queryList, + spaceToPlus, normalizeBreaks); +} + + + +int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest, + const URI_TYPE(QueryList) * queryList, + UriBool spaceToPlus, UriBool normalizeBreaks) { + int charsRequired; + int res; + URI_CHAR * queryString; + + if (dest == NULL) { + return URI_ERROR_NULL; + } + + /* Calculate space */ + res = URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, &charsRequired, + spaceToPlus, normalizeBreaks); + if (res != URI_SUCCESS) { + return res; + } + charsRequired++; + + /* Allocate space */ + queryString = malloc(charsRequired * sizeof(URI_CHAR)); + if (queryString == NULL) { + return URI_ERROR_MALLOC; + } + + /* Put query in */ + res = URI_FUNC(ComposeQueryEx)(queryString, queryList, charsRequired, + NULL, spaceToPlus, normalizeBreaks); + if (res != URI_SUCCESS) { + free(queryString); + return res; + } + + *dest = queryString; + return URI_SUCCESS; +} + + + +int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest, + const URI_TYPE(QueryList) * queryList, + int maxChars, int * charsWritten, int * charsRequired, + UriBool spaceToPlus, UriBool normalizeBreaks) { + UriBool firstItem = URI_TRUE; + int ampersandLen = 0; + URI_CHAR * write = dest; + + /* Subtract terminator */ + if (dest == NULL) { + *charsRequired = 0; + } else { + maxChars--; + } + + while (queryList != NULL) { + const URI_CHAR * const key = queryList->key; + const URI_CHAR * const value = queryList->value; + const int worstCase = (normalizeBreaks == URI_TRUE ? 6 : 3); + const int keyLen = (key == NULL) ? 0 : (int)URI_STRLEN(key); + const int keyRequiredChars = worstCase * keyLen; + const int valueLen = (value == NULL) ? 0 : (int)URI_STRLEN(value); + const int valueRequiredChars = worstCase * valueLen; + + if (dest == NULL) { + if (firstItem == URI_TRUE) { + ampersandLen = 1; + firstItem = URI_FALSE; + } + + (*charsRequired) += ampersandLen + keyRequiredChars + ((value == NULL) + ? 0 + : 1 + valueRequiredChars); + } else { + URI_CHAR * afterKey; + + if ((write - dest) + ampersandLen + keyRequiredChars > maxChars) { + return URI_ERROR_OUTPUT_TOO_LARGE; + } + + /* Copy key */ + if (firstItem == URI_TRUE) { + firstItem = URI_FALSE; + } else { + write[0] = _UT('&'); + write++; + } + afterKey = URI_FUNC(EscapeEx)(key, key + keyLen, + write, spaceToPlus, normalizeBreaks); + write += (afterKey - write); + + if (value != NULL) { + URI_CHAR * afterValue; + + if ((write - dest) + 1 + valueRequiredChars > maxChars) { + return URI_ERROR_OUTPUT_TOO_LARGE; + } + + /* Copy value */ + write[0] = _UT('='); + write++; + afterValue = URI_FUNC(EscapeEx)(value, value + valueLen, + write, spaceToPlus, normalizeBreaks); + write += (afterValue - write); + } + } + + queryList = queryList->next; + } + + if (dest != NULL) { + write[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = (int)(write - dest) + 1; /* .. for terminator */ + } + } + + return URI_SUCCESS; +} + + + +UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext, + int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter, + const URI_CHAR * valueFirst, const URI_CHAR * valueAfter, + UriBool plusToSpace, UriBreakConversion breakConversion) { + const int keyLen = (int)(keyAfter - keyFirst); + const int valueLen = (int)(valueAfter - valueFirst); + URI_CHAR * key; + URI_CHAR * value; + + if ((prevNext == NULL) || (itemCount == NULL) + || (keyFirst == NULL) || (keyAfter == NULL) + || (keyFirst > keyAfter) || (valueFirst > valueAfter) + || ((keyFirst == keyAfter) + && (valueFirst == NULL) && (valueAfter == NULL))) { + return URI_TRUE; + } + + /* Append new empty item */ + *prevNext = malloc(1 * sizeof(URI_TYPE(QueryList))); + if (*prevNext == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + (*prevNext)->next = NULL; + + + /* Fill key */ + key = malloc((keyLen + 1) * sizeof(URI_CHAR)); + if (key == NULL) { + free(*prevNext); + *prevNext = NULL; + return URI_FALSE; /* Raises malloc error */ + } + + key[keyLen] = _UT('\0'); + if (keyLen > 0) { + /* Copy 1:1 */ + memcpy(key, keyFirst, keyLen * sizeof(URI_CHAR)); + + /* Unescape */ + URI_FUNC(UnescapeInPlaceEx)(key, plusToSpace, breakConversion); + } + (*prevNext)->key = key; + + + /* Fill value */ + if (valueFirst != NULL) { + value = malloc((valueLen + 1) * sizeof(URI_CHAR)); + if (value == NULL) { + free(key); + free(*prevNext); + *prevNext = NULL; + return URI_FALSE; /* Raises malloc error */ + } + + value[valueLen] = _UT('\0'); + if (valueLen > 0) { + /* Copy 1:1 */ + memcpy(value, valueFirst, valueLen * sizeof(URI_CHAR)); + + /* Unescape */ + URI_FUNC(UnescapeInPlaceEx)(value, plusToSpace, breakConversion); + } + (*prevNext)->value = value; + } else { + value = NULL; + } + (*prevNext)->value = value; + + (*itemCount)++; + return URI_TRUE; +} + + + +void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList) { + while (queryList != NULL) { + URI_TYPE(QueryList) * nextBackup = queryList->next; + free((URI_CHAR *)queryList->key); /* const cast */ + free((URI_CHAR *)queryList->value); /* const cast */ + free(queryList); + queryList = nextBackup; + } +} + + + +int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount, + const URI_CHAR * first, const URI_CHAR * afterLast) { + const UriBool plusToSpace = URI_TRUE; + const UriBreakConversion breakConversion = URI_BR_DONT_TOUCH; + + return URI_FUNC(DissectQueryMallocEx)(dest, itemCount, first, afterLast, + plusToSpace, breakConversion); +} + + + +int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount, + const URI_CHAR * first, const URI_CHAR * afterLast, + UriBool plusToSpace, UriBreakConversion breakConversion) { + const URI_CHAR * walk = first; + const URI_CHAR * keyFirst = first; + const URI_CHAR * keyAfter = NULL; + const URI_CHAR * valueFirst = NULL; + const URI_CHAR * valueAfter = NULL; + URI_TYPE(QueryList) ** prevNext = dest; + int nullCounter; + int * itemsAppended = (itemCount == NULL) ? &nullCounter : itemCount; + + if ((dest == NULL) || (first == NULL) || (afterLast == NULL)) { + return URI_ERROR_NULL; + } + + if (first > afterLast) { + return URI_ERROR_RANGE_INVALID; + } + + *dest = NULL; + *itemsAppended = 0; + + /* Parse query string */ + for (; walk < afterLast; walk++) { + switch (*walk) { + case _UT('&'): + if (valueFirst != NULL) { + valueAfter = walk; + } else { + keyAfter = walk; + } + + if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended, + keyFirst, keyAfter, valueFirst, valueAfter, + plusToSpace, breakConversion) + == URI_FALSE) { + /* Free list we built */ + *itemsAppended = 0; + URI_FUNC(FreeQueryList)(*dest); + return URI_ERROR_MALLOC; + } + + /* Make future items children of the current */ + if ((prevNext != NULL) && (*prevNext != NULL)) { + prevNext = &((*prevNext)->next); + } + + if (walk + 1 < afterLast) { + keyFirst = walk + 1; + } else { + keyFirst = NULL; + } + keyAfter = NULL; + valueFirst = NULL; + valueAfter = NULL; + break; + + case _UT('='): + /* NOTE: WE treat the first '=' as a separator, */ + /* all following go into the value part */ + if (keyAfter == NULL) { + keyAfter = walk; + if (walk + 1 <= afterLast) { + valueFirst = walk + 1; + valueAfter = walk + 1; + } + } + break; + + default: + break; + } + } + + if (valueFirst != NULL) { + /* Must be key/value pair */ + valueAfter = walk; + } else { + /* Must be key only */ + keyAfter = walk; + } + + if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended, keyFirst, keyAfter, + valueFirst, valueAfter, plusToSpace, breakConversion) + == URI_FALSE) { + /* Free list we built */ + *itemsAppended = 0; + URI_FUNC(FreeQueryList)(*dest); + return URI_ERROR_MALLOC; + } + + return URI_SUCCESS; +} + + + +#endif diff --git a/plugins/uriparser/UriRecompose.c b/plugins/uriparser/UriRecompose.c new file mode 100644 index 0000000..09daee0 --- /dev/null +++ b/plugins/uriparser/UriRecompose.c @@ -0,0 +1,577 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriRecompose.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriRecompose.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +static int URI_FUNC(ToStringEngine)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, + int maxChars, int * charsWritten, int * charsRequired); + + + +int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri, + int * charsRequired) { + const int MAX_CHARS = ((unsigned int)-1) >> 1; + return URI_FUNC(ToStringEngine)(NULL, uri, MAX_CHARS, NULL, charsRequired); +} + + + +int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, + int maxChars, int * charsWritten) { + return URI_FUNC(ToStringEngine)(dest, uri, maxChars, charsWritten, NULL); +} + + + +static URI_INLINE int URI_FUNC(ToStringEngine)(URI_CHAR * dest, + const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten, + int * charsRequired) { + int written = 0; + if ((uri == NULL) || ((dest == NULL) && (charsRequired == NULL))) { + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_NULL; + } + + if (maxChars < 1) { + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + maxChars--; /* So we don't have to substract 1 for '\0' all the time */ + + /* [01/19] result = "" */ + if (dest != NULL) { + dest[0] = _UT('\0'); + } else { + (*charsRequired) = 0; + } + /* [02/19] if defined(scheme) then */ + if (uri->scheme.first != NULL) { + /* [03/19] append scheme to result; */ + const int charsToWrite + = (int)(uri->scheme.afterLast - uri->scheme.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->scheme.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite; + } + /* [04/19] append ":" to result; */ + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT(":"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + /* [05/19] endif; */ + } + /* [06/19] if defined(authority) then */ + if (URI_FUNC(IsHostSet)(uri)) { + /* [07/19] append "//" to result; */ + if (dest != NULL) { + if (written + 2 <= maxChars) { + memcpy(dest + written, _UT("//"), + 2 * sizeof(URI_CHAR)); + written += 2; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 2; + } + /* [08/19] append authority to result; */ + /* UserInfo */ + if (uri->userInfo.first != NULL) { + const int charsToWrite = (int)(uri->userInfo.afterLast - uri->userInfo.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->userInfo.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("@"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite + 1; + } + } + + /* Host */ + if (uri->hostData.ip4 != NULL) { + /* IPv4 */ + int i = 0; + for (; i < 4; i++) { + const unsigned char value = uri->hostData.ip4->data[i]; + const int charsToWrite = (value > 99) ? 3 : ((value > 9) ? 2 : 1); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + URI_CHAR text[4]; + if (value > 99) { + text[0] = _UT('0') + (value / 100); + text[1] = _UT('0') + ((value % 100) / 10); + text[2] = _UT('0') + (value % 10); + } else if (value > 9) { + text[0] = _UT('0') + (value / 10); + text[1] = _UT('0') + (value % 10); + } else { + text[0] = _UT('0') + value; + } + text[charsToWrite] = _UT('\0'); + memcpy(dest + written, text, charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + if (i < 3) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("."), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } + } else { + (*charsRequired) += charsToWrite + 1; + } + } + } else if (uri->hostData.ip6 != NULL) { + /* IPv6 */ + int i = 0; + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("["), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + + for (; i < 16; i++) { + const unsigned char value = uri->hostData.ip6->data[i]; + if (dest != NULL) { + if (written + 2 <= maxChars) { + URI_CHAR text[3]; + text[0] = URI_FUNC(HexToLetterEx)(value / 16, URI_FALSE); + text[1] = URI_FUNC(HexToLetterEx)(value % 16, URI_FALSE); + text[2] = _UT('\0'); + memcpy(dest + written, text, 2 * sizeof(URI_CHAR)); + written += 2; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 2; + } + if (((i & 1) == 1) && (i < 15)) { + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT(":"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + } + } + + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("]"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + } else if (uri->hostData.ipFuture.first != NULL) { + /* IPvFuture */ + const int charsToWrite = (int)(uri->hostData.ipFuture.afterLast + - uri->hostData.ipFuture.first); + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("["), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->hostData.ipFuture.first, charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("]"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1 + charsToWrite + 1; + } + } else if (uri->hostText.first != NULL) { + /* Regname */ + const int charsToWrite = (int)(uri->hostText.afterLast - uri->hostText.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->hostText.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite; + } + } + + /* Port */ + if (uri->portText.first != NULL) { + const int charsToWrite = (int)(uri->portText.afterLast - uri->portText.first); + if (dest != NULL) { + /* Leading ':' */ + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT(":"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + + /* Port number */ + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->portText.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1 + charsToWrite; + } + } + /* [09/19] endif; */ + } + /* [10/19] append path to result; */ + /* Slash needed here? */ + if (uri->absolutePath || ((uri->pathHead != NULL) + && URI_FUNC(IsHostSet)(uri))) { + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("/"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + } + + if (uri->pathHead != NULL) { + URI_TYPE(PathSegment) * walker = uri->pathHead; + do { + const int charsToWrite = (int)(walker->text.afterLast - walker->text.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, walker->text.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite; + } + + /* Not last segment -> append slash */ + if (walker->next != NULL) { + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("/"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + } + + walker = walker->next; + } while (walker != NULL); + } + /* [11/19] if defined(query) then */ + if (uri->query.first != NULL) { + /* [12/19] append "?" to result; */ + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("?"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + /* [13/19] append query to result; */ + { + const int charsToWrite + = (int)(uri->query.afterLast - uri->query.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->query.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite; + } + } + /* [14/19] endif; */ + } + /* [15/19] if defined(fragment) then */ + if (uri->fragment.first != NULL) { + /* [16/19] append "#" to result; */ + if (dest != NULL) { + if (written + 1 <= maxChars) { + memcpy(dest + written, _UT("#"), + 1 * sizeof(URI_CHAR)); + written += 1; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += 1; + } + /* [17/19] append fragment to result; */ + { + const int charsToWrite + = (int)(uri->fragment.afterLast - uri->fragment.first); + if (dest != NULL) { + if (written + charsToWrite <= maxChars) { + memcpy(dest + written, uri->fragment.first, + charsToWrite * sizeof(URI_CHAR)); + written += charsToWrite; + } else { + dest[0] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = 0; + } + return URI_ERROR_TOSTRING_TOO_LONG; + } + } else { + (*charsRequired) += charsToWrite; + } + } + /* [18/19] endif; */ + } + /* [19/19] return result; */ + if (dest != NULL) { + dest[written++] = _UT('\0'); + if (charsWritten != NULL) { + *charsWritten = written; + } + } + return URI_SUCCESS; +} + + + +#endif diff --git a/plugins/uriparser/UriResolve.c b/plugins/uriparser/UriResolve.c new file mode 100644 index 0000000..3660b6b --- /dev/null +++ b/plugins/uriparser/UriResolve.c @@ -0,0 +1,316 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriResolve.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriResolve.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +/* Appends a relative URI to an absolute. The last path segment of + * the absolute URI is replaced. */ +static URI_INLINE UriBool URI_FUNC(MergePath)(URI_TYPE(Uri) * absWork, + const URI_TYPE(Uri) * relAppend) { + URI_TYPE(PathSegment) * sourceWalker; + URI_TYPE(PathSegment) * destPrev; + if (relAppend->pathHead == NULL) { + return URI_TRUE; + } + + /* Replace last segment ("" if trailing slash) with first of append chain */ + if (absWork->pathHead == NULL) { + URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment))); + if (dup == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + dup->next = NULL; + absWork->pathHead = dup; + absWork->pathTail = dup; + } + absWork->pathTail->text.first = relAppend->pathHead->text.first; + absWork->pathTail->text.afterLast = relAppend->pathHead->text.afterLast; + + /* Append all the others */ + sourceWalker = relAppend->pathHead->next; + if (sourceWalker == NULL) { + return URI_TRUE; + } + destPrev = absWork->pathTail; + + for (;;) { + URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment))); + if (dup == NULL) { + destPrev->next = NULL; + absWork->pathTail = destPrev; + return URI_FALSE; /* Raises malloc error */ + } + dup->text = sourceWalker->text; + destPrev->next = dup; + + if (sourceWalker->next == NULL) { + absWork->pathTail = dup; + absWork->pathTail->next = NULL; + break; + } + destPrev = dup; + sourceWalker = sourceWalker->next; + } + + return URI_TRUE; +} + + +static int URI_FUNC(ResolveAbsolutePathFlag)(URI_TYPE(Uri) * absWork) { + if (absWork == NULL) { + return URI_ERROR_NULL; + } + + if (URI_FUNC(IsHostSet)(absWork) && absWork->absolutePath) { + /* Empty segment needed, instead? */ + if (absWork->pathHead == NULL) { + URI_TYPE(PathSegment) * const segment = malloc(sizeof(URI_TYPE(PathSegment))); + if (segment == NULL) { + return URI_ERROR_MALLOC; + } + segment->text.first = URI_FUNC(SafeToPointTo); + segment->text.afterLast = URI_FUNC(SafeToPointTo); + segment->next = NULL; + + absWork->pathHead = segment; + absWork->pathTail = segment; + } + + absWork->absolutePath = URI_FALSE; + } + + return URI_SUCCESS; +} + + +static int URI_FUNC(AddBaseUriImpl)(URI_TYPE(Uri) * absDest, + const URI_TYPE(Uri) * relSource, + const URI_TYPE(Uri) * absBase, + UriResolutionOptions options) { + if (absDest == NULL) { + return URI_ERROR_NULL; + } + URI_FUNC(ResetUri)(absDest); + + if ((relSource == NULL) || (absBase == NULL)) { + return URI_ERROR_NULL; + } + + /* absBase absolute? */ + if (absBase->scheme.first == NULL) { + return URI_ERROR_ADDBASE_REL_BASE; + } + + /* [00/32] -- A non-strict parser may ignore a scheme in the reference */ + /* [00/32] -- if it is identical to the base URI's scheme. */ + /* [00/32] if ((not strict) and (R.scheme == Base.scheme)) then */ + UriBool relSourceHasScheme = (relSource->scheme.first != NULL) ? URI_TRUE : URI_FALSE; + if ((options & URI_RESOLVE_IDENTICAL_SCHEME_COMPAT) + && (absBase->scheme.first != NULL) + && (relSource->scheme.first != NULL) + && (0 == URI_FUNC(CompareRange)(&(absBase->scheme), &(relSource->scheme)))) { + /* [00/32] undefine(R.scheme); */ + relSourceHasScheme = URI_FALSE; + /* [00/32] endif; */ + } + + /* [01/32] if defined(R.scheme) then */ + if (relSourceHasScheme) { + /* [02/32] T.scheme = R.scheme; */ + absDest->scheme = relSource->scheme; + /* [03/32] T.authority = R.authority; */ + if (!URI_FUNC(CopyAuthority)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + /* [04/32] T.path = remove_dot_segments(R.path); */ + if (!URI_FUNC(CopyPath)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { + return URI_ERROR_MALLOC; + } + /* [05/32] T.query = R.query; */ + absDest->query = relSource->query; + /* [06/32] else */ + } else { + /* [07/32] if defined(R.authority) then */ + if (URI_FUNC(IsHostSet)(relSource)) { + /* [08/32] T.authority = R.authority; */ + if (!URI_FUNC(CopyAuthority)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + /* [09/32] T.path = remove_dot_segments(R.path); */ + if (!URI_FUNC(CopyPath)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { + return URI_ERROR_MALLOC; + } + /* [10/32] T.query = R.query; */ + absDest->query = relSource->query; + /* [11/32] else */ + } else { + /* [28/32] T.authority = Base.authority; */ + if (!URI_FUNC(CopyAuthority)(absDest, absBase)) { + return URI_ERROR_MALLOC; + } + /* [12/32] if (R.path == "") then */ + if (relSource->pathHead == NULL && !relSource->absolutePath) { + /* [13/32] T.path = Base.path; */ + if (!URI_FUNC(CopyPath)(absDest, absBase)) { + return URI_ERROR_MALLOC; + } + /* [14/32] if defined(R.query) then */ + if (relSource->query.first != NULL) { + /* [15/32] T.query = R.query; */ + absDest->query = relSource->query; + /* [16/32] else */ + } else { + /* [17/32] T.query = Base.query; */ + absDest->query = absBase->query; + /* [18/32] endif; */ + } + /* [19/32] else */ + } else { + /* [20/32] if (R.path starts-with "/") then */ + if (relSource->absolutePath) { + int res; + /* [21/32] T.path = remove_dot_segments(R.path); */ + if (!URI_FUNC(CopyPath)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + res = URI_FUNC(ResolveAbsolutePathFlag)(absDest); + if (res != URI_SUCCESS) { + return res; + } + if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { + return URI_ERROR_MALLOC; + } + /* [22/32] else */ + } else { + /* [23/32] T.path = merge(Base.path, R.path); */ + if (!URI_FUNC(CopyPath)(absDest, absBase)) { + return URI_ERROR_MALLOC; + } + if (!URI_FUNC(MergePath)(absDest, relSource)) { + return URI_ERROR_MALLOC; + } + /* [24/32] T.path = remove_dot_segments(T.path); */ + if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { + return URI_ERROR_MALLOC; + } + + if (!URI_FUNC(FixAmbiguity)(absDest)) { + return URI_ERROR_MALLOC; + } + /* [25/32] endif; */ + } + /* [26/32] T.query = R.query; */ + absDest->query = relSource->query; + /* [27/32] endif; */ + } + URI_FUNC(FixEmptyTrailSegment)(absDest); + /* [29/32] endif; */ + } + /* [30/32] T.scheme = Base.scheme; */ + absDest->scheme = absBase->scheme; + /* [31/32] endif; */ + } + /* [32/32] T.fragment = R.fragment; */ + absDest->fragment = relSource->fragment; + + return URI_SUCCESS; + +} + + + +int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absDest, + const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase) { + const int res = URI_FUNC(AddBaseUriImpl)(absDest, relSource, absBase, URI_RESOLVE_STRICTLY); + if ((res != URI_SUCCESS) && (absDest != NULL)) { + URI_FUNC(FreeUriMembers)(absDest); + } + return res; +} + + + +int URI_FUNC(AddBaseUriEx)(URI_TYPE(Uri) * absDest, + const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase, + UriResolutionOptions options) { + const int res = URI_FUNC(AddBaseUriImpl)(absDest, relSource, absBase, options); + if ((res != URI_SUCCESS) && (absDest != NULL)) { + URI_FUNC(FreeUriMembers)(absDest); + } + return res; +} + + + +#endif diff --git a/plugins/uriparser/UriShorten.c b/plugins/uriparser/UriShorten.c new file mode 100644 index 0000000..c839ae5 --- /dev/null +++ b/plugins/uriparser/UriShorten.c @@ -0,0 +1,320 @@ +/* + * uriparser - RFC 3986 URI parsing library + * + * Copyright (C) 2007, Weijia Song + * Copyright (C) 2007, Sebastian Pipping + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * * Neither the name of the nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* What encodings are enabled? */ +#include +#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) +/* Include SELF twice */ +# ifdef URI_ENABLE_ANSI +# define URI_PASS_ANSI 1 +# include "UriShorten.c" +# undef URI_PASS_ANSI +# endif +# ifdef URI_ENABLE_UNICODE +# define URI_PASS_UNICODE 1 +# include "UriShorten.c" +# undef URI_PASS_UNICODE +# endif +#else +# ifdef URI_PASS_ANSI +# include +# else +# include +# include +# endif + + + +#ifndef URI_DOXYGEN +# include +# include "UriCommon.h" +#endif + + + +static URI_INLINE UriBool URI_FUNC(AppendSegment)(URI_TYPE(Uri) * uri, + const URI_CHAR * first, const URI_CHAR * afterLast) { + /* Create segment */ + URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); + if (segment == NULL) { + return URI_FALSE; /* Raises malloc error */ + } + segment->next = NULL; + segment->text.first = first; + segment->text.afterLast = afterLast; + + /* Put into chain */ + if (uri->pathTail == NULL) { + uri->pathHead = segment; + } else { + uri->pathTail->next = segment; + } + uri->pathTail = segment; + + return URI_TRUE; +} + + + +static URI_INLINE UriBool URI_FUNC(EqualsAuthority)(const URI_TYPE(Uri) * first, + const URI_TYPE(Uri) * second) { + /* IPv4 */ + if (first->hostData.ip4 != NULL) { + return ((second->hostData.ip4 != NULL) + && !memcmp(first->hostData.ip4->data, + second->hostData.ip4->data, 4)) ? URI_TRUE : URI_FALSE; + } + + /* IPv6 */ + if (first->hostData.ip6 != NULL) { + return ((second->hostData.ip6 != NULL) + && !memcmp(first->hostData.ip6->data, + second->hostData.ip6->data, 16)) ? URI_TRUE : URI_FALSE; + } + + /* IPvFuture */ + if (first->hostData.ipFuture.first != NULL) { + return ((second->hostData.ipFuture.first != NULL) + && !URI_STRNCMP(first->hostData.ipFuture.first, + second->hostData.ipFuture.first, + first->hostData.ipFuture.afterLast + - first->hostData.ipFuture.first)) + ? URI_TRUE : URI_FALSE; + } + + if (first->hostText.first != NULL) { + return ((second->hostText.first != NULL) + && !URI_STRNCMP(first->hostText.first, + second->hostText.first, + first->hostText.afterLast + - first->hostText.first)) ? URI_TRUE : URI_FALSE; + } + + return (second->hostText.first == NULL); +} + + + +int URI_FUNC(RemoveBaseUriImpl)(URI_TYPE(Uri) * dest, + const URI_TYPE(Uri) * absSource, + const URI_TYPE(Uri) * absBase, + UriBool domainRootMode) { + if (dest == NULL) { + return URI_ERROR_NULL; + } + URI_FUNC(ResetUri)(dest); + + if ((absSource == NULL) || (absBase == NULL)) { + return URI_ERROR_NULL; + } + + /* absBase absolute? */ + if (absBase->scheme.first == NULL) { + return URI_ERROR_REMOVEBASE_REL_BASE; + } + + /* absSource absolute? */ + if (absSource->scheme.first == NULL) { + return URI_ERROR_REMOVEBASE_REL_SOURCE; + } + + /* [01/50] if (A.scheme != Base.scheme) then */ + if (URI_STRNCMP(absSource->scheme.first, absBase->scheme.first, + absSource->scheme.afterLast - absSource->scheme.first)) { + /* [02/50] T.scheme = A.scheme; */ + dest->scheme = absSource->scheme; + /* [03/50] T.authority = A.authority; */ + if (!URI_FUNC(CopyAuthority)(dest, absSource)) { + return URI_ERROR_MALLOC; + } + /* [04/50] T.path = A.path; */ + if (!URI_FUNC(CopyPath)(dest, absSource)) { + return URI_ERROR_MALLOC; + } + /* [05/50] else */ + } else { + /* [06/50] undef(T.scheme); */ + /* NOOP */ + /* [07/50] if (A.authority != Base.authority) then */ + if (!URI_FUNC(EqualsAuthority)(absSource, absBase)) { + /* [08/50] T.authority = A.authority; */ + if (!URI_FUNC(CopyAuthority)(dest, absSource)) { + return URI_ERROR_MALLOC; + } + /* [09/50] T.path = A.path; */ + if (!URI_FUNC(CopyPath)(dest, absSource)) { + return URI_ERROR_MALLOC; + } + /* [10/50] else */ + } else { + /* [11/50] if domainRootMode then */ + if (domainRootMode == URI_TRUE) { + /* [12/50] undef(T.authority); */ + /* NOOP */ + /* [13/50] if (first(A.path) == "") then */ + /* GROUPED */ + /* [14/50] T.path = "/." + A.path; */ + /* GROUPED */ + /* [15/50] else */ + /* GROUPED */ + /* [16/50] T.path = A.path; */ + /* GROUPED */ + /* [17/50] endif; */ + if (!URI_FUNC(CopyPath)(dest, absSource)) { + return URI_ERROR_MALLOC; + } + dest->absolutePath = URI_TRUE; + + if (!URI_FUNC(FixAmbiguity)(dest)) { + return URI_ERROR_MALLOC; + } + /* [18/50] else */ + } else { + const URI_TYPE(PathSegment) * sourceSeg = absSource->pathHead; + const URI_TYPE(PathSegment) * baseSeg = absBase->pathHead; + /* [19/50] bool pathNaked = true; */ + UriBool pathNaked = URI_TRUE; + /* [20/50] undef(last(Base.path)); */ + /* NOOP */ + /* [21/50] T.path = ""; */ + dest->absolutePath = URI_FALSE; + /* [22/50] while (first(A.path) == first(Base.path)) do */ + while ((sourceSeg != NULL) && (baseSeg != NULL) + && !URI_STRNCMP(sourceSeg->text.first, baseSeg->text.first, + sourceSeg->text.afterLast - sourceSeg->text.first) + && !((sourceSeg->text.first == sourceSeg->text.afterLast) + && ((sourceSeg->next == NULL) != (baseSeg->next == NULL)))) { + /* [23/50] A.path++; */ + sourceSeg = sourceSeg->next; + /* [24/50] Base.path++; */ + baseSeg = baseSeg->next; + /* [25/50] endwhile; */ + } + /* [26/50] while defined(first(Base.path)) do */ + while ((baseSeg != NULL) && (baseSeg->next != NULL)) { + /* [27/50] Base.path++; */ + baseSeg = baseSeg->next; + /* [28/50] T.path += "../"; */ + if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstParent), + URI_FUNC(ConstParent) + 2)) { + return URI_ERROR_MALLOC; + } + /* [29/50] pathNaked = false; */ + pathNaked = URI_FALSE; + /* [30/50] endwhile; */ + } + /* [31/50] while defined(first(A.path)) do */ + while (sourceSeg != NULL) { + /* [32/50] if pathNaked then */ + if (pathNaked == URI_TRUE) { + /* [33/50] if (first(A.path) contains ":") then */ + UriBool containsColon = URI_FALSE; + const URI_CHAR * ch = sourceSeg->text.first; + for (; ch < sourceSeg->text.afterLast; ch++) { + if (*ch == _UT(':')) { + containsColon = URI_TRUE; + break; + } + } + + if (containsColon) { + /* [34/50] T.path += "./"; */ + if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd), + URI_FUNC(ConstPwd) + 1)) { + return URI_ERROR_MALLOC; + } + /* [35/50] elseif (first(A.path) == "") then */ + } else if (sourceSeg->text.first == sourceSeg->text.afterLast) { + /* [36/50] T.path += "/."; */ + if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd), + URI_FUNC(ConstPwd) + 1)) { + return URI_ERROR_MALLOC; + } + /* [37/50] endif; */ + } + /* [38/50] endif; */ + } + /* [39/50] T.path += first(A.path); */ + if (!URI_FUNC(AppendSegment)(dest, sourceSeg->text.first, + sourceSeg->text.afterLast)) { + return URI_ERROR_MALLOC; + } + /* [40/50] pathNaked = false; */ + pathNaked = URI_FALSE; + /* [41/50] A.path++; */ + sourceSeg = sourceSeg->next; + /* [42/50] if defined(first(A.path)) then */ + /* NOOP */ + /* [43/50] T.path += + "/"; */ + /* NOOP */ + /* [44/50] endif; */ + /* NOOP */ + /* [45/50] endwhile; */ + } + /* [46/50] endif; */ + } + /* [47/50] endif; */ + } + /* [48/50] endif; */ + } + /* [49/50] T.query = A.query; */ + dest->query = absSource->query; + /* [50/50] T.fragment = A.fragment; */ + dest->fragment = absSource->fragment; + + return URI_SUCCESS; +} + + + +int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest, + const URI_TYPE(Uri) * absSource, + const URI_TYPE(Uri) * absBase, + UriBool domainRootMode) { + const int res = URI_FUNC(RemoveBaseUriImpl)(dest, absSource, + absBase, domainRootMode); + if ((res != URI_SUCCESS) && (dest != NULL)) { + URI_FUNC(FreeUriMembers)(dest); + } + return res; +} + + + +#endif -- cgit v0.10-9-g596f From 00cb1408adf1725ee05c1fe928c9207b7acc235b Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 6 May 2017 19:39:59 +0200 Subject: fixed redirect sticky port handling in redir diff --git a/.travis.yml b/.travis.yml index 617c415..b8249aa 100644 --- a/.travis.yml +++ b/.travis.yml @@ -20,7 +20,7 @@ matrix: name: "monitoring-plugins/monitoring-plugins" description: "Monitoring Plugins" notification_email: team@monitoring-plugins.org - build_command_prepend: tools/setup && ./configure + build_command_prepend: tools/setup && ./configure --enable-check-curl build_command: make branch_pattern: coverity.* - compiler: "clang" @@ -55,6 +55,7 @@ install: - sudo apt-get install -qq --no-install-recommends autoconf automake - sudo apt-get install -qq --no-install-recommends faketime - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl + - sudo apt-get install -qq --no-install-recommends libcurl3-gnutls-dev # Trusty related dependencies (not yet provided) - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server # enable ssl apache diff --git a/configure.ac b/configure.ac index c56163c..2291c51 100644 --- a/configure.ac +++ b/configure.ac @@ -1908,5 +1908,6 @@ ACX_FEATURE([enable],[perl-modules]) ACX_FEATURE([with],[cgiurl]) ACX_FEATURE([with],[trusted-path]) ACX_FEATURE([enable],[libtap]) +ACX_FEATURE([enable],[check-curl]) ACX_FEATURE([with],[libcurl]) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 72db27a..3ae1c4d 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -551,7 +551,7 @@ check_http (void) CURLINFO_REDIRECT_COUNT: get the number of redirects, print it, maybe a range option here is nice like for expected page size? */ } else { - // old style redirection is handled below + /* old style redirection is handled below */ } } @@ -1019,6 +1019,8 @@ redir (curlhelp_write_curlbuf* header_buf) new_host = strdup (uri_string (uri.hostText, buf, DEFAULT_BUFFER_SIZE)); } + /* compose new path */ + /* TODO: handle fragments and query part of URL */ new_url = (char *)calloc( 1, DEFAULT_BUFFER_SIZE); if (uri.pathHead) { const UriPathSegmentA* p = uri.pathHead; @@ -1038,23 +1040,21 @@ redir (curlhelp_write_curlbuf* header_buf) /* set new values for redirected request */ - free (host_name); - host_name = strndup (new_host, MAX_IPV4_HOSTLENGTH); - free(new_host); - - server_port = (unsigned short)new_port; - - /* reset virtual port */ - virtual_port = server_port; - if (!(followsticky & STICKY_HOST)) { free (server_address); server_address = strndup (new_host, MAX_IPV4_HOSTLENGTH); } if (!(followsticky & STICKY_PORT)) { - server_port = new_port; + server_port = (unsigned short)new_port; } + free (host_name); + host_name = strndup (new_host, MAX_IPV4_HOSTLENGTH); + + /* reset virtual port */ + virtual_port = server_port; + + free(new_host); free (server_url); server_url = new_url; -- cgit v0.10-9-g596f From e003353fe9b01299b45e50104403f48b47c2c752 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 6 May 2017 20:17:03 +0200 Subject: added check|_curl enabler in right position in configure in Travis script diff --git a/.travis.yml b/.travis.yml index b8249aa..ef53b2d 100644 --- a/.travis.yml +++ b/.travis.yml @@ -20,7 +20,7 @@ matrix: name: "monitoring-plugins/monitoring-plugins" description: "Monitoring Plugins" notification_email: team@monitoring-plugins.org - build_command_prepend: tools/setup && ./configure --enable-check-curl + build_command_prepend: tools/setup && ./configure build_command: make branch_pattern: coverity.* - compiler: "clang" @@ -70,7 +70,7 @@ before_script: # Detect LDAP configuration (seems volatile on trusty env) - sed -e 's/cn=admin,dc=nodomain/'$(sudo /usr/sbin/slapcat|grep ^dn:|grep cn=|awk '{print $2}')'/' -i plugins/t/NPTest.cache.travis - tools/setup - - ./configure --enable-libtap + - ./configure --enable-libtap --enable-check-curl - make - export NPTEST_CACHE="$(pwd)/plugins/t/NPTest.cache.travis" - ssh-keygen -t dsa -N "" -f ~/.ssh/id_dsa -- cgit v0.10-9-g596f From 2f3eb33b861f69a3e55244a880544e6ad34d867c Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 6 May 2017 22:01:10 +0200 Subject: fixed include flags for liburiparser diff --git a/plugins/uriparser/Makefile.am b/plugins/uriparser/Makefile.am index 592e694..703e6c5 100644 --- a/plugins/uriparser/Makefile.am +++ b/plugins/uriparser/Makefile.am @@ -7,3 +7,5 @@ liburiparser_a_SOURCES = UriCommon.c UriCompare.c \ UriParseBase.c UriQuery.c \ UriRecompose.c UriResolve.c \ UriShorten.c + +liburiparser_a_CFLAGS = $(AM_CFLAGS) -I.. -- cgit v0.10-9-g596f From 414752ee9235833587e5b34701ba0b46a99e3a45 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 7 May 2017 07:54:59 +0000 Subject: added check_curl to REQUIREMENTS diff --git a/REQUIREMENTS b/REQUIREMENTS index ac7b593..39e04cd 100644 --- a/REQUIREMENTS +++ b/REQUIREMENTS @@ -11,6 +11,20 @@ check_ldaps, check_http --ssl, check_tcp --ssl, check_smtp --starttls - Requires openssl or gnutls libraries for SSL connections http://www.openssl.org, http://www.gnu.org/software/gnutls +check_curl: + - Requires libcurl 7.15.2 or later + http://www.haxx.se + - --ssl requires OpenSSL for certificate checks, otherwise + libcurl must be quite new to support CURLINFO_CRETINFO with + GnuTLS and NSS libraries: + - 7.42.0 or newer for GnuTLS + - 7.34.0 or newer for NSS + GnuTLS is known to create problems on some distributions with + self-signed certificate chains + http://www.openssl.org, http://www.gnu.org/software/gnutls, + http://www.mozilla.org/projects/security/pki/nss/, + other SSL implementations are currently not supported + check_fping: - Requires the fping utility distributed with SATAN. Either download and install SATAN or grab the fping program from -- cgit v0.10-9-g596f From 7eb43858db118b89d13eb71bf07b2c110edb258b Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 7 May 2017 07:55:44 +0000 Subject: fixed some printf bugs and switched to libcurl4-openssl for Travis tests diff --git a/.travis.yml b/.travis.yml index ef53b2d..e725004 100644 --- a/.travis.yml +++ b/.travis.yml @@ -55,7 +55,7 @@ install: - sudo apt-get install -qq --no-install-recommends autoconf automake - sudo apt-get install -qq --no-install-recommends faketime - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl - - sudo apt-get install -qq --no-install-recommends libcurl3-gnutls-dev + - sudo apt-get install -qq --no-install-recommends libcurl4-openssl-dev # Trusty related dependencies (not yet provided) - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server # enable ssl apache diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3ae1c4d..6856e78 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -711,14 +711,14 @@ GOT_FIRST_CERT: /* get status line of answer, check sanity of HTTP code */ if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparseable status line in %.3g seconds response time|%s\n", - code, total_time, perfstring); - die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %d unknown - %s", code, msg); + total_time, perfstring); + die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %ld unknown - %s", code, msg); } /* get result code from cURL */ handle_curl_option_return_code (curl_easy_getinfo (curl, CURLINFO_RESPONSE_CODE, &code), "CURLINFO_RESPONSE_CODE"); if (verbose>=2) - printf ("* curl CURLINFO_RESPONSE_CODE is %d\n", code); + printf ("* curl CURLINFO_RESPONSE_CODE is %ld\n", code); /* print status line, header, body if verbose */ if (verbose >= 2) { @@ -942,7 +942,7 @@ redir (curlhelp_write_curlbuf* header_buf) if (++redir_depth > max_depth) die (STATE_WARNING, - _("HTTP WARNING - maximum redirection depth %d exceeded - %s\n"), + _("HTTP WARNING - maximum redirection depth %d exceeded - %s%s\n"), max_depth, location, (display_html ? "" : "")); UriParserStateA state; @@ -1005,7 +1005,7 @@ redir (curlhelp_write_curlbuf* header_buf) } if (new_port > MAX_PORT) die (STATE_UNKNOWN, - _("HTTP UNKNOWN - Redirection to port above %d - %s\n"), + _("HTTP UNKNOWN - Redirection to port above %d - %s%s\n"), MAX_PORT, location, display_html ? "" : ""); /* by RFC 7231 relative URLs in Location should be taken relative to @@ -1239,7 +1239,8 @@ process_arguments (int argc, char **argv) http_method = strdup (optarg); break; case 'A': /* useragent */ - snprintf (user_agent, DEFAULT_BUFFER_SIZE, optarg); + strncpy (user_agent, optarg, DEFAULT_BUFFER_SIZE); + user_agent[DEFAULT_BUFFER_SIZE-1] = '\0'; break; case 'k': /* Additional headers */ if (http_opt_headers_count == 0) @@ -1524,7 +1525,7 @@ process_arguments (int argc, char **argv) if (critical_thresholds && thlds->critical->end>(double)socket_timeout) socket_timeout = (int)thlds->critical->end + 1; if (verbose >= 2) - printf ("* Socket timeout set to %d seconds\n", socket_timeout); + printf ("* Socket timeout set to %ld seconds\n", socket_timeout); if (http_method == NULL) http_method = strdup ("GET"); @@ -1722,7 +1723,7 @@ print_usage (void) printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); - printf (" [-T ] [-j method]\n", progname); + printf (" [-T ] [-j method]\n"); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); @@ -1969,7 +1970,7 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA time_t srv_data = curl_getdate (server_date, NULL); time_t doc_data = curl_getdate (document_date, NULL); if (verbose >= 2) - printf ("* server date: '%s' (%d), doc_date: '%s' (%d)\n", server_date, srv_data, document_date, doc_data); + printf ("* server date: '%s' (%d), doc_date: '%s' (%d)\n", server_date, (int)srv_data, document_date, (int)doc_data); if (srv_data <= 0) { snprintf (*msg, DEFAULT_BUFFER_SIZE, _("%sServer date \"%100s\" unparsable, "), *msg, server_date); date_result = max_state_alt(STATE_CRITICAL, date_result); -- cgit v0.10-9-g596f From 787e6986eea096c644c09eefa1b66a4156b32b45 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 10:11:15 +0200 Subject: check_curl: handle proxied https requests diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 6856e78..0f06573 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -371,8 +371,19 @@ check_http (void) } #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) */ - /* set port */ - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); + /* extract proxy information for legacy proxy https requests */ + if (!strcmp(http_method, "CONNECT")) { + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXY, server_address), "CURLOPT_PROXY"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXYPORT, (long)server_port), "CURLOPT_PROXYPORT"); + if (verbose>=2) + printf ("* curl CURLOPT_PROXY: %s:%d\n", server_address, server_port); + http_method = "GET"; + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, server_url), "CURLOPT_URL"); + //server_port = use_ssl ? HTTPS_PORT : HTTP_PORT; + } else { + /* set port */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); + } /* set HTTP method */ if (http_method) { -- cgit v0.10-9-g596f From 7344524655058bb0d28f6850b1e671e22527074e Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 10:11:49 +0200 Subject: check_curl: clean whitespace diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 0f06573..82324d3 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -452,7 +452,7 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert), "CURLOPT_CAINFO"); handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2), "CURLOPT_SSL_VERIFYHOST"); - } else { + } else { /* backward-compatible behaviour, be tolerant in checks * TODO: depending on more options have aspects we want * to be less tolerant about ssl verfications @@ -460,7 +460,7 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYPEER, 0), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSL_VERIFYHOST, 0), "CURLOPT_SSL_VERIFYHOST"); } - + /* detect SSL library used by libcurl */ ssl_library = curlhelp_get_ssl_library (curl); @@ -481,7 +481,7 @@ check_http (void) #endif /* USE_OPENSSL */ /* libcurl is built with OpenSSL, monitoring plugins, so falling * back to manually extracting certificate information */ - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L), "CURLOPT_CERTINFO"); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CERTINFO, 1L), "CURLOPT_CERTINFO"); break; case CURLHELP_SSL_LIBRARY_NSS: @@ -492,7 +492,7 @@ check_http (void) die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (libcurl linked with SSL library '%s' is too old)\n", curlhelp_get_ssl_library_string (ssl_library)); #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 34, 0) */ break; - + case CURLHELP_SSL_LIBRARY_GNUTLS: #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 42, 0) /* GnuTLS: support for CERTINFO is implemented since 7.42.0 */ @@ -501,7 +501,7 @@ check_http (void) die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (libcurl linked with SSL library '%s' is too old)\n", curlhelp_get_ssl_library_string (ssl_library)); #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 42, 0) */ break; - + case CURLHELP_SSL_LIBRARY_UNKNOWN: default: die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (unknown SSL library '%s', must implement first)\n", curlhelp_get_ssl_library_string (ssl_library)); @@ -543,12 +543,12 @@ check_http (void) if (onredirect == STATE_DEPENDENT) { if( followmethod == FOLLOW_LIBCURL ) { handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_FOLLOWLOCATION, 1), "CURLOPT_FOLLOWLOCATION"); - - /* default -1 is infinite, not good, could lead to zombie plugins! + + /* default -1 is infinite, not good, could lead to zombie plugins! Setting it to one bigger than maximal limit to handle errors nicely below */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_MAXREDIRS, max_depth+1), "CURLOPT_MAXREDIRS"); - + /* for now allow only http and https (we are a http(s) check plugin in the end) */ #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 4) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_REDIR_PROTOCOLS, CURLPROTO_HTTP | CURLPROTO_HTTPS), "CURLOPT_REDIRECT_PROTOCOLS"); @@ -640,7 +640,7 @@ check_http (void) cert_ptr.to_info = NULL; res = curl_easy_getinfo (curl, CURLINFO_CERTINFO, &cert_ptr.to_info); if (!res && cert_ptr.to_info) { -#ifdef USE_OPENSSL +#ifdef USE_OPENSSL /* We have no OpenSSL in libcurl, but we can use OpenSSL for X509 cert parsing * We only check the first certificate and assume it's the one of the server */ @@ -669,7 +669,7 @@ GOT_FIRST_CERT: } BIO_free (cert_BIO); result = np_net_ssl_check_certificate(cert, days_till_exp_warn, days_till_exp_crit); - return result; + return result; #else /* USE_OPENSSL */ /* We assume we don't have OpenSSL and np_net_ssl_check_certificate at our disposal, * so we use the libcurl CURLINFO data @@ -859,12 +859,12 @@ GOT_FIRST_CERT: /* make sure the page is of an appropriate size * TODO: as far I can tell check_http gets the full size of header and * if -N is not given header+body. Does this make sense? - * + * * TODO: check_http.c had a get_length function, the question is really * here what to use? the raw data size of the header_buf, the value of * Content-Length, both and warn if they differ? Should the length be * header+body or only body? - * + * * One possible policy: * - use header_buf.buflen (warning, if it mismatches to the Content-Length value * - if -N (nobody) is given, use Content-Length only and hope the server set @@ -903,7 +903,7 @@ GOT_FIRST_CERT: curl_global_cleanup (); curlhelp_freewritebuffer (&body_buf); curlhelp_freewritebuffer (&header_buf); - if (!strcmp (http_method, "PUT")) { + if (!strcmp (http_method, "PUT")) { curlhelp_freereadbuffer (&put_buf); } @@ -941,11 +941,11 @@ redir (curlhelp_write_curlbuf* header_buf) int new_port; char *new_host; char *new_url; - + int res = phr_parse_response (header_buf->buf, header_buf->buflen, &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, headers, &nof_headers, 0); - + location = get_header_value (headers, nof_headers, "location"); if (verbose >= 2) @@ -955,7 +955,7 @@ redir (curlhelp_write_curlbuf* header_buf) die (STATE_WARNING, _("HTTP WARNING - maximum redirection depth %d exceeded - %s%s\n"), max_depth, location, (display_html ? "" : "")); - + UriParserStateA state; UriUriA uri; state.uri = &uri; @@ -968,7 +968,7 @@ redir (curlhelp_write_curlbuf* header_buf) die (STATE_UNKNOWN, _("HTTP UNKNOWN - Could not allocate URL\n")); } } - + if (verbose >= 2) { printf (_("** scheme: %s\n"), uri_string (uri.scheme, buf, DEFAULT_BUFFER_SIZE)); @@ -1003,7 +1003,7 @@ redir (curlhelp_write_curlbuf* header_buf) } use_ssl = !uri_strcmp (uri.scheme, "https"); - + /* we do a sloppy test here only, because uriparser would have failed * above, if the port would be invalid, we just check for MAX_PORT */ @@ -1018,7 +1018,7 @@ redir (curlhelp_write_curlbuf* header_buf) die (STATE_UNKNOWN, _("HTTP UNKNOWN - Redirection to port above %d - %s%s\n"), MAX_PORT, location, display_html ? "" : ""); - + /* by RFC 7231 relative URLs in Location should be taken relative to * the original URL, so wy try to form a new absolute URL here */ @@ -1070,11 +1070,11 @@ redir (curlhelp_write_curlbuf* header_buf) server_url = new_url; uriFreeUriMembersA (&uri); - + if (verbose) printf (_("Redirection to %s://%s:%d%s\n"), use_ssl ? "https" : "http", host_name ? host_name : server_address, server_port, server_url); - + /* TODO: the hash component MUST be taken from the original URL and * attached to the URL in Location */ @@ -1320,7 +1320,7 @@ process_arguments (int argc, char **argv) got_plus = 1; *plus_ptr = '\0'; } - + if (optarg[0] == '2') ssl_version = CURL_SSLVERSION_SSLv2; else if (optarg[0] == '3') @@ -1380,7 +1380,7 @@ process_arguments (int argc, char **argv) break; } } -#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) */ +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) */ if (verbose >= 2) printf(_("* Set SSL/TLS version to %d\n"), ssl_version); if (server_port == HTTP_PORT) @@ -1778,13 +1778,13 @@ int curlhelp_buffer_read_callback (void *buffer, size_t size, size_t nmemb, void *stream) { curlhelp_read_curlbuf *buf = (curlhelp_read_curlbuf *)stream; - + size_t n = min (nmemb * size, buf->buflen - buf->pos); memcpy (buffer, buf->buf + buf->pos, n); buf->pos += n; - - return (int)n; + + return (int)n; } void @@ -1953,7 +1953,7 @@ get_header_value (const struct phr_header* headers, const size_t nof_headers, co return NULL; } -int +int check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFAULT_BUFFER_SIZE]) { char *server_date = NULL; @@ -1963,11 +1963,11 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA struct phr_header headers[255]; size_t nof_headers = 255; size_t msglen; - + int res = phr_parse_response (header_buf->buf, header_buf->buflen, &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, headers, &nof_headers, 0); - + server_date = get_header_value (headers, nof_headers, "date"); document_date = get_header_value (headers, nof_headers, "last-modified"); @@ -2002,7 +2002,7 @@ check_document_dates (const curlhelp_write_curlbuf *header_buf, char (*msg)[DEFA } } } - + if (server_date) free (server_date); if (document_date) free (document_date); @@ -2025,7 +2025,7 @@ get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_wri int res = phr_parse_response (header_buf->buf, header_buf->buflen, &status_line.http_minor, &status_line.http_code, &status_line.msg, &msglen, headers, &nof_headers, 0); - + content_length_s = get_header_value (headers, nof_headers, "content-length"); if (!content_length_s) { return header_buf->buflen + body_buf->buflen; @@ -2055,10 +2055,10 @@ curlhelp_get_ssl_library (CURL* curl) ssl_version = strdup (version_data->ssl_version); if (ssl_version == NULL ) return CURLHELP_SSL_LIBRARY_UNKNOWN; - + library = strtok (ssl_version, "/"); if (library == NULL) return CURLHELP_SSL_LIBRARY_UNKNOWN; - + if (strcmp (library, "OpenSSL") == 0) ssl_library = CURLHELP_SSL_LIBRARY_OPENSSL; else if (strcmp (library, "LibreSSL") == 0) @@ -2070,9 +2070,9 @@ curlhelp_get_ssl_library (CURL* curl) if (verbose >= 2) printf ("* SSL library string is : %s %s (%d)\n", version_data->ssl_version, library, ssl_library); - + free (ssl_version); - + return ssl_library; } @@ -2101,12 +2101,12 @@ parse_cert_date (const char *s) { struct tm tm; time_t date; - + if (!s) return -1; strptime (s, "%Y-%m-%d %H:%M:%S GMT", &tm); date = mktime (&tm); - + return date; } @@ -2127,7 +2127,7 @@ net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_war float time_left; int days_left; int time_remaining; - char timestamp[50] = ""; + char timestamp[50] = ""; int status = STATE_UNKNOWN; if (verbose >= 2) @@ -2160,7 +2160,7 @@ HAVE_FIRST_CERT: if (verbose >= 2) printf ("**** REQUEST CERTIFICATES ****\n"); - + if (!cname_found) { printf("%s\n",_("CRITICAL - Cannot retrieve certificate subject.")); return STATE_CRITICAL; -- cgit v0.10-9-g596f From e09629ef65e91c56744c29fbee9ac6e6b24ed1db Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 10:16:01 +0200 Subject: check_curl: add docs about https proxy diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 82324d3..e7e05a5 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1709,7 +1709,10 @@ print_help (void) printf (" %s\n", _("A STATE_CRITICAL will be returned when certificate expires in less than 14 days")); printf (" %s\n\n", "CHECK SSL WEBSERVER CONTENT VIA PROXY USING HTTP 1.1 CONNECT: "); - printf (" %s\n", _("check_curl -I 192.168.100.35 -p 80 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); + printf (" %s\n", _("It is recommended to use an environment proxy like:")); + printf (" %s\n", _("https_proxy=http://127.0.0.1:3128 ./check_curl -H www.verisign.com -S")); + printf (" %s\n", _("but proxy requests in check_http style still works:")); + printf (" %s\n", _("check_curl -I 192.168.100.35 -p 3128 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); printf (" %s\n", _("all these options are needed: -I -p -u -S(sl) -j CONNECT -H ")); printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); -- cgit v0.10-9-g596f From 603dd23d116173f94669ee2d35ca89b8f7b362d6 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 10:49:53 +0200 Subject: check_curl: add legacy http request support diff --git a/plugins/check_curl.c b/plugins/check_curl.c index e7e05a5..da48750 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -372,14 +372,14 @@ check_http (void) #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) */ /* extract proxy information for legacy proxy https requests */ - if (!strcmp(http_method, "CONNECT")) { + if (!strcmp(http_method, "CONNECT") || strstr(server_url, "http") == server_url) { handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXY, server_address), "CURLOPT_PROXY"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXYPORT, (long)server_port), "CURLOPT_PROXYPORT"); if (verbose>=2) printf ("* curl CURLOPT_PROXY: %s:%d\n", server_address, server_port); http_method = "GET"; handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, server_url), "CURLOPT_URL"); - //server_port = use_ssl ? HTTPS_PORT : HTTP_PORT; + virtual_port = use_ssl ? HTTPS_PORT : HTTP_PORT; } else { /* set port */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); -- cgit v0.10-9-g596f From 8172fe7f3052d32713b8c193429844cc243df47b Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 21:05:33 +0200 Subject: check_curl: update docs diff --git a/plugins/check_curl.c b/plugins/check_curl.c index da48750..9d4c3f0 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1707,11 +1707,19 @@ print_help (void) printf (" %s\n", _("a STATE_OK is returned. When the certificate is still valid, but for less than")); printf (" %s\n", _("30 days, but more than 14 days, a STATE_WARNING is returned.")); printf (" %s\n", _("A STATE_CRITICAL will be returned when certificate expires in less than 14 days")); +#endif + + printf ("\n %s\n", "CHECK WEBSERVER CONTENT VIA PROXY:"); + printf (" %s\n", _("It is recommended to use an environment proxy like:")); + printf (" %s\n", _("http_proxy=http://192.168.100.35:3128 ./check_curl -H www.monitoring-plugins.org")); + printf (" %s\n", _("legacy proxy requests in check_http style still work:")); + printf (" %s\n", _("check_curl -I 192.168.100.35 -p 3128 -u http://www.monitoring-plugins.org/ -H www.monitoring-plugins.org")); - printf (" %s\n\n", "CHECK SSL WEBSERVER CONTENT VIA PROXY USING HTTP 1.1 CONNECT: "); +#ifdef LIBCURL_FEATURE_SSL + printf ("\n %s\n", "CHECK SSL WEBSERVER CONTENT VIA PROXY USING HTTP 1.1 CONNECT: "); printf (" %s\n", _("It is recommended to use an environment proxy like:")); - printf (" %s\n", _("https_proxy=http://127.0.0.1:3128 ./check_curl -H www.verisign.com -S")); - printf (" %s\n", _("but proxy requests in check_http style still works:")); + printf (" %s\n", _("https_proxy=http://192.168.100.35:3128 ./check_curl -H www.verisign.com -S")); + printf (" %s\n", _("legacy proxy requests in check_http style still work:")); printf (" %s\n", _("check_curl -I 192.168.100.35 -p 3128 -u https://www.verisign.com/ -S -j CONNECT -H www.verisign.com ")); printf (" %s\n", _("all these options are needed: -I -p -u -S(sl) -j CONNECT -H ")); printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); -- cgit v0.10-9-g596f From 7ad8bcba5bfc082a4e7b39a6ad908aa5d13de7d1 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Sun, 28 May 2017 21:10:20 +0200 Subject: check_curl: add proxy auth option diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 9d4c3f0..1544195 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -175,6 +175,7 @@ char string_expect[MAX_INPUT_BUFFER] = ""; char server_expect[MAX_INPUT_BUFFER] = HTTP_EXPECT; int server_expect_yn = 0; char user_auth[MAX_INPUT_BUFFER] = ""; +char proxy_auth[MAX_INPUT_BUFFER] = ""; char **http_opt_headers; int http_opt_headers_count = 0; int display_html = FALSE; @@ -520,6 +521,10 @@ check_http (void) /* set default or user-given user agent identification */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERAGENT, user_agent), "CURLOPT_USERAGENT"); + /* proxy-authentication */ + if (strcmp(proxy_auth, "")) + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXYUSERPWD, proxy_auth), "CURLOPT_PROXYUSERPWD"); + /* authentication */ if (strcmp(user_auth, "")) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_USERPWD, user_auth), "CURLOPT_USERPWD"); @@ -1128,6 +1133,7 @@ process_arguments (int argc, char **argv) {"url", required_argument, 0, 'u'}, {"port", required_argument, 0, 'p'}, {"authorization", required_argument, 0, 'a'}, + {"proxy-authorization", required_argument, 0, 'b'}, {"header-string", required_argument, 0, 'd'}, {"string", required_argument, 0, 's'}, {"expect", required_argument, 0, 'e'}, @@ -1171,7 +1177,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -1238,6 +1244,10 @@ process_arguments (int argc, char **argv) strncpy (user_auth, optarg, MAX_INPUT_BUFFER - 1); user_auth[MAX_INPUT_BUFFER - 1] = 0; break; + case 'b': /* proxy-authorization info */ + strncpy (proxy_auth, optarg, MAX_INPUT_BUFFER - 1); + proxy_auth[MAX_INPUT_BUFFER - 1] = 0; + break; case 'P': /* HTTP POST data in URL encoded format; ignored if settings already */ if (! http_post_data) http_post_data = strdup (optarg); @@ -1648,6 +1658,8 @@ print_help (void) printf (" %s\n", _("Return CRITICAL if found, OK if not\n")); printf (" %s\n", "-a, --authorization=AUTH_PAIR"); printf (" %s\n", _("Username:password on sites with basic authentication")); + printf (" %s\n", "-b, --proxy-authorization=AUTH_PAIR"); + printf (" %s\n", _("Username:password on proxy-servers with basic authentication")); printf (" %s\n", "-A, --useragent=STRING"); printf (" %s\n", _("String to be sent in http header as \"User Agent\"")); printf (" %s\n", "-k, --header=STRING"); -- cgit v0.10-9-g596f From 8a5b49ec36bc9cb4e24bb2ccba208c16066a6b1e Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Wed, 31 May 2017 07:45:00 +0200 Subject: added -b to print_usage diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 1544195..2f58305 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1753,7 +1753,7 @@ print_usage (void) printf (" %s -H | -I [-u ] [-p ]\n",progname); printf (" [-J ] [-K ] [--ca-cert ]\n"); printf (" [-w ] [-c ] [-t ] [-L] [-E] [-a auth]\n"); - printf (" [-f ]\n"); + printf (" [-b proxy_auth] [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); -- cgit v0.10-9-g596f From 8120c53f903c684f78df925ae5a6d615f5154058 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 2 Nov 2017 16:46:20 +0100 Subject: set ssl_version to CURL_SSLVERSION_DEFAULT and not CURL_SSLVERSION_TLSv1_0 (since curl 7.56.1 we get an illegal argument error otherwise) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 2f58305..db1e9c5 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1320,10 +1320,10 @@ process_arguments (int argc, char **argv) #ifdef LIBCURL_FEATURE_SSL enable_ssl: use_ssl = TRUE; - /* ssl_version initialized to CURL_SSLVERSION_TLSv1_0 as a default. + /* ssl_version initialized to CURL_SSLVERSION_DEFAULT as a default. * Only set if it's non-zero. This helps when we include multiple * parameters, like -S and -C combinations */ - ssl_version = CURL_SSLVERSION_TLSv1_0; + ssl_version = CURL_SSLVERSION_DEFAULT; if (c=='S' && optarg != NULL) { char *plus_ptr = strchr(optarg, '+'); if (plus_ptr) { -- cgit v0.10-9-g596f From 5368e24616454ad8833af37e2fa0eb88ce5812ac Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 28 May 2018 14:19:02 +0200 Subject: check_curl: cleanup - remove obsolete todos - change exit code to unknown if regex exectute fails Signed-off-by: Sven Nierlein diff --git a/plugins/check_curl.c b/plugins/check_curl.c index db1e9c5..9e13766 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -744,7 +744,6 @@ GOT_FIRST_CERT: /* make sure the status line matches the response we are looking for */ if (!expected_statuscode(status_line.first_line, server_expect)) { - /* TODO: fix first_line being cut off */ if (server_port == HTTP_PORT) snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host: %s\n"), status_line.first_line); else @@ -752,7 +751,6 @@ GOT_FIRST_CERT: die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); } - /* TODO: implement -d header tests */ if( server_expect_yn ) { snprintf(msg, DEFAULT_BUFFER_SIZE, _("Status line output matched \"%s\" - "), server_expect); if (verbose) @@ -854,27 +852,13 @@ GOT_FIRST_CERT: result = STATE_CRITICAL; } else { - /* FIXME: Shouldn't that be UNKNOWN? */ regerror (errcode, &preg, errbuf, MAX_INPUT_BUFFER); snprintf (msg, DEFAULT_BUFFER_SIZE, _("%sExecute Error: %s, "), msg, errbuf); - result = STATE_CRITICAL; + result = STATE_UNKNOWN; } } - /* make sure the page is of an appropriate size - * TODO: as far I can tell check_http gets the full size of header and - * if -N is not given header+body. Does this make sense? - * - * TODO: check_http.c had a get_length function, the question is really - * here what to use? the raw data size of the header_buf, the value of - * Content-Length, both and warn if they differ? Should the length be - * header+body or only body? - * - * One possible policy: - * - use header_buf.buflen (warning, if it mismatches to the Content-Length value - * - if -N (nobody) is given, use Content-Length only and hope the server set - * the value correcly - */ + /* make sure the page is of an appropriate size */ page_len = get_content_length(&header_buf, &body_buf); if ((max_page_len > 0) && (page_len > max_page_len)) { snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spage size %d too large, "), msg, page_len); -- cgit v0.10-9-g596f From 7dd0a31b285121ae2b4af019e7b337e5eb0427af Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 31 May 2018 14:43:02 +0200 Subject: fixed initialization of server_url (freeing non-pointer in case of redirects) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 9e13766..73b3aad 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -129,7 +129,7 @@ int invert_regex = 0; char *server_address; char *host_name; -char *server_url = DEFAULT_SERVER_URL; +char *server_url = 0; char server_ip[DEFAULT_BUFFER_SIZE]; struct curl_slist *server_ips = NULL; unsigned short server_port = HTTP_PORT; @@ -1160,6 +1160,8 @@ process_arguments (int argc, char **argv) strcpy (argv[c], "-n"); } + server_url = strdup(DEFAULT_SERVER_URL); + while (1) { c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) -- cgit v0.10-9-g596f From c5cd0e491238397bd9cafff2707773146305a528 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 31 May 2018 15:32:09 +0200 Subject: updated bundled version of uriparser to 0.8.5 diff --git a/ACKNOWLEDGEMENTS b/ACKNOWLEDGEMENTS index 06e84e2..a8c4ba0 100644 --- a/ACKNOWLEDGEMENTS +++ b/ACKNOWLEDGEMENTS @@ -39,7 +39,7 @@ https://github.com/h2o/picohttpparser Use of the library for HTTP header parsing in check_curl. Copyright (C) 2007, Weijia Song -Copyright (C) 2007, Sebastian Pipping +Copyright (C) 2007, Sebastian Pipping All rights reserved. uriparser - RFC 3986 URI parsing library http://uriparser.sourceforge.net/ diff --git a/plugins/uriparser/Uri.h b/plugins/uriparser/Uri.h index 4a18580..a3f7914 100644 --- a/plugins/uriparser/Uri.h +++ b/plugins/uriparser/Uri.h @@ -1,8 +1,9 @@ -/* +/* f9ca23a99fc1c8ff610e2bdc0bff3c4bb4d883ccbff5851fe7a1398f9b6aca57 (0.8.5+) + * * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -157,7 +158,8 @@ typedef struct URI_TYPE(UriStruct) { URI_TYPE(PathSegment) * pathTail; /**< Tail of the list behind pathHead */ URI_TYPE(TextRange) query; /**< Query without leading "?" */ URI_TYPE(TextRange) fragment; /**< Query without leading "#" */ - UriBool absolutePath; /**< Absolute path flag, distincting "a" and "/a" */ + UriBool absolutePath; /**< Absolute path flag, distincting "a" and "/a"; + always URI_FALSE for URIs with host */ UriBool owner; /**< Memory owner flag */ void * reserved; /**< Reserved to the parser */ @@ -567,7 +569,7 @@ int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, /** * Extracts a Windows filename from a %URI string. - * The destination buffer must be large enough to hold len(uriString) + 1 - 8 + * The destination buffer must be large enough to hold len(uriString) + 1 - 5 * characters in case of an absolute %URI or len(uriString) + 1 in case * of a relative %URI. * diff --git a/plugins/uriparser/UriBase.h b/plugins/uriparser/UriBase.h index bc63b05..45ba5ab 100644 --- a/plugins/uriparser/UriBase.h +++ b/plugins/uriparser/UriBase.h @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -55,7 +55,7 @@ /* Version */ #define URI_VER_MAJOR 0 #define URI_VER_MINOR 8 -#define URI_VER_RELEASE 4 +#define URI_VER_RELEASE 5 #define URI_VER_SUFFIX_ANSI "" #define URI_VER_SUFFIX_UNICODE URI_ANSI_TO_UNICODE(URI_VER_SUFFIX_ANSI) diff --git a/plugins/uriparser/UriCommon.c b/plugins/uriparser/UriCommon.c index 37d6b39..571d6d4 100644 --- a/plugins/uriparser/UriCommon.c +++ b/plugins/uriparser/UriCommon.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriCompare.c b/plugins/uriparser/UriCompare.c index 6896f64..35f5a13 100644 --- a/plugins/uriparser/UriCompare.c +++ b/plugins/uriparser/UriCompare.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriDefsAnsi.h b/plugins/uriparser/UriDefsAnsi.h index deaefaa..d6dbcad 100644 --- a/plugins/uriparser/UriDefsAnsi.h +++ b/plugins/uriparser/UriDefsAnsi.h @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriDefsConfig.h b/plugins/uriparser/UriDefsConfig.h index d87ccb6..9f7ac65 100644 --- a/plugins/uriparser/UriDefsConfig.h +++ b/plugins/uriparser/UriDefsConfig.h @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -88,7 +88,7 @@ /* http://predef.sourceforge.net/precomp.html#sec32 */ /* http://msdn2.microsoft.com/en-us/library/ms882281.aspx */ # define URI_INLINE __forceinline -#elif (__STDC_VERSION__ >= 199901L) +#elif (defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)) /* C99, "inline" is a keyword */ # define URI_INLINE inline #else diff --git a/plugins/uriparser/UriDefsUnicode.h b/plugins/uriparser/UriDefsUnicode.h index fa4befc..8bb8bc2 100644 --- a/plugins/uriparser/UriDefsUnicode.h +++ b/plugins/uriparser/UriDefsUnicode.h @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriEscape.c b/plugins/uriparser/UriEscape.c index 79ee3a6..17f8bad 100644 --- a/plugins/uriparser/UriEscape.c +++ b/plugins/uriparser/UriEscape.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriFile.c b/plugins/uriparser/UriFile.c index 9cf788f..332f6a9 100644 --- a/plugins/uriparser/UriFile.c +++ b/plugins/uriparser/UriFile.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -83,7 +83,7 @@ static URI_INLINE int URI_FUNC(FilenameToUriString)(const URI_CHAR * filename, is_windows_network = (filename[0] == _UT('\\')) && (filename[1] == _UT('\\')); absolute = fromUnix ? (filename[0] == _UT('/')) - : ((filename[0] != _UT('\0')) && (filename[1] == _UT(':')) + : (((filename[0] != _UT('\0')) && (filename[1] == _UT(':'))) || is_windows_network); if (absolute) { diff --git a/plugins/uriparser/UriIp4.c b/plugins/uriparser/UriIp4.c index c00910b..ee067d3 100644 --- a/plugins/uriparser/UriIp4.c +++ b/plugins/uriparser/UriIp4.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriIp4.h b/plugins/uriparser/UriIp4.h index 885a35c..9251c49 100644 --- a/plugins/uriparser/UriIp4.h +++ b/plugins/uriparser/UriIp4.h @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriIp4Base.c b/plugins/uriparser/UriIp4Base.c index 5cd298f..f066246 100644 --- a/plugins/uriparser/UriIp4Base.c +++ b/plugins/uriparser/UriIp4Base.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriNormalize.c b/plugins/uriparser/UriNormalize.c index 49db9ff..d68c371 100644 --- a/plugins/uriparser/UriNormalize.c +++ b/plugins/uriparser/UriNormalize.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -434,8 +434,8 @@ static URI_INLINE UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri, && (ranger->text.afterLast != NULL) && (ranger->text.afterLast > ranger->text.first)) { free((URI_CHAR *)ranger->text.first); - free(ranger); } + free(ranger); ranger = next; } diff --git a/plugins/uriparser/UriNormalizeBase.c b/plugins/uriparser/UriNormalizeBase.c index bac5888..8dbe7fd 100644 --- a/plugins/uriparser/UriNormalizeBase.c +++ b/plugins/uriparser/UriNormalizeBase.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriParse.c b/plugins/uriparser/UriParse.c index e3cdc68..5eee16d 100644 --- a/plugins/uriparser/UriParse.c +++ b/plugins/uriparser/UriParse.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -193,7 +193,7 @@ static UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, co static UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first); static void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state); -static void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state); +static void URI_FUNC(ResetParserStateExceptUri)(URI_TYPE(ParserState) * state); static UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); @@ -2022,7 +2022,7 @@ static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * -static URI_INLINE void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state) { +static URI_INLINE void URI_FUNC(ResetParserStateExceptUri)(URI_TYPE(ParserState) * state) { URI_TYPE(Uri) * const uriBackup = state->uri; memset(state, 0, sizeof(URI_TYPE(ParserState))); state->uri = uriBackup; @@ -2071,7 +2071,7 @@ int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, const URI_CHAR * first, uri = state->uri; /* Init parser */ - URI_FUNC(ResetParserState)(state); + URI_FUNC(ResetParserStateExceptUri)(state); URI_FUNC(ResetUri)(uri); /* Parse */ @@ -2211,9 +2211,9 @@ UriBool URI_FUNC(_TESTING_ONLY_ParseIpSix)(const URI_CHAR * text) { const URI_CHAR * const afterIpSix = text + URI_STRLEN(text); const URI_CHAR * res; - URI_FUNC(ResetParserState)(&parser); URI_FUNC(ResetUri)(&uri); parser.uri = &uri; + URI_FUNC(ResetParserStateExceptUri)(&parser); parser.uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); res = URI_FUNC(ParseIPv6address2)(&parser, text, afterIpSix); URI_FUNC(FreeUriMembers)(&uri); diff --git a/plugins/uriparser/UriParseBase.c b/plugins/uriparser/UriParseBase.c index 75e4761..1d4ef6e 100644 --- a/plugins/uriparser/UriParseBase.c +++ b/plugins/uriparser/UriParseBase.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriQuery.c b/plugins/uriparser/UriQuery.c index 7adb073..f0cd4f8 100644 --- a/plugins/uriparser/UriQuery.c +++ b/plugins/uriparser/UriQuery.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriRecompose.c b/plugins/uriparser/UriRecompose.c index 09daee0..9678aac 100644 --- a/plugins/uriparser/UriRecompose.c +++ b/plugins/uriparser/UriRecompose.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/plugins/uriparser/UriResolve.c b/plugins/uriparser/UriResolve.c index 3660b6b..bb1d21a 100644 --- a/plugins/uriparser/UriResolve.c +++ b/plugins/uriparser/UriResolve.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -152,6 +152,8 @@ static int URI_FUNC(AddBaseUriImpl)(URI_TYPE(Uri) * absDest, const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase, UriResolutionOptions options) { + UriBool relSourceHasScheme; + if (absDest == NULL) { return URI_ERROR_NULL; } @@ -169,7 +171,7 @@ static int URI_FUNC(AddBaseUriImpl)(URI_TYPE(Uri) * absDest, /* [00/32] -- A non-strict parser may ignore a scheme in the reference */ /* [00/32] -- if it is identical to the base URI's scheme. */ /* [00/32] if ((not strict) and (R.scheme == Base.scheme)) then */ - UriBool relSourceHasScheme = (relSource->scheme.first != NULL) ? URI_TRUE : URI_FALSE; + relSourceHasScheme = (relSource->scheme.first != NULL) ? URI_TRUE : URI_FALSE; if ((options & URI_RESOLVE_IDENTICAL_SCHEME_COMPAT) && (absBase->scheme.first != NULL) && (relSource->scheme.first != NULL) diff --git a/plugins/uriparser/UriShorten.c b/plugins/uriparser/UriShorten.c index c839ae5..0145f68 100644 --- a/plugins/uriparser/UriShorten.c +++ b/plugins/uriparser/UriShorten.c @@ -2,7 +2,7 @@ * uriparser - RFC 3986 URI parsing library * * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping + * Copyright (C) 2007, Sebastian Pipping * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -131,7 +131,7 @@ static URI_INLINE UriBool URI_FUNC(EqualsAuthority)(const URI_TYPE(Uri) * first, -int URI_FUNC(RemoveBaseUriImpl)(URI_TYPE(Uri) * dest, +static int URI_FUNC(RemoveBaseUriImpl)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * absSource, const URI_TYPE(Uri) * absBase, UriBool domainRootMode) { -- cgit v0.10-9-g596f From 46c5b54254026a170006cdcdbe1ffe38771274cb Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 1 Jun 2018 10:59:55 +0200 Subject: bumped coyright to 2018 in check_curl.c diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 73b3aad..1e9561b 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -3,7 +3,7 @@ * Monitoring check_curl plugin * * License: GPL -* Copyright (c) 1999-2017 Monitoring Plugins Development Team +* Copyright (c) 1999-2018 Monitoring Plugins Development Team * * Description: * @@ -34,7 +34,7 @@ *****************************************************************************/ const char *progname = "check_curl"; -const char *copyright = "2006-2017"; +const char *copyright = "2006-2018"; const char *email = "devel@monitoring-plugins.org"; #include -- cgit v0.10-9-g596f From d6491ba403d37abf54e56c96fb5c7b808943b5d3 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 1 Jun 2018 11:14:05 +0200 Subject: removed embedded uriparser library, added --with-uriparser configure option to use uriparser library from the system diff --git a/ACKNOWLEDGEMENTS b/ACKNOWLEDGEMENTS index a8c4ba0..d73be54 100644 --- a/ACKNOWLEDGEMENTS +++ b/ACKNOWLEDGEMENTS @@ -20,7 +20,7 @@ Using the DLPI support on SysV systems to get the host MAC address in check_dhcp Stenberg, Daniel Copyright (c) 1996 - 2004, Daniel Stenberg, http://curl.haxx.se/ -Use of duplication of macros in m4/np_curl.m4 +Use of duplication of macros in m4/np_curl.m4 (slighly adapted for m4/uriparser.m4 too) Coreutils team Copyright (C) 91, 1995-2004 Free Software Foundation, Inc. @@ -37,10 +37,3 @@ Copyright (c) 2009-2014 Kazuho Oku, Tokuhiro Matsuno, Daisuke Murase, picohttpparser https://github.com/h2o/picohttpparser Use of the library for HTTP header parsing in check_curl. - -Copyright (C) 2007, Weijia Song -Copyright (C) 2007, Sebastian Pipping -All rights reserved. -uriparser - RFC 3986 URI parsing library -http://uriparser.sourceforge.net/ -Use of the library for URL parsing in check_curl. diff --git a/REQUIREMENTS b/REQUIREMENTS index 39e04cd..e641cea 100644 --- a/REQUIREMENTS +++ b/REQUIREMENTS @@ -14,7 +14,7 @@ check_ldaps, check_http --ssl, check_tcp --ssl, check_smtp --starttls check_curl: - Requires libcurl 7.15.2 or later http://www.haxx.se - - --ssl requires OpenSSL for certificate checks, otherwise + - --ssl/-S and -C requires OpenSSL for certificate checks, otherwise libcurl must be quite new to support CURLINFO_CRETINFO with GnuTLS and NSS libraries: - 7.42.0 or newer for GnuTLS @@ -24,6 +24,8 @@ check_curl: http://www.openssl.org, http://www.gnu.org/software/gnutls, http://www.mozilla.org/projects/security/pki/nss/, other SSL implementations are currently not supported + - uriparser 0.7.5 or later + https://uriparser.github.io/ check_fping: - Requires the fping utility distributed with SATAN. Either diff --git a/configure.ac b/configure.ac index 2291c51..9ac0995 100644 --- a/configure.ac +++ b/configure.ac @@ -391,25 +391,49 @@ AC_ARG_ENABLE(check-curl, [enable_check_curl=$enableval], [enable_check_curl=no]) if test "$enable_check_curl" = "yes" ; then + _can_enable_check_curl=no + dnl Check for cURL library LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ - EXTRAS="$EXTRAS check_curl\$(EXEEXT)" + _can_enable_check_curl=yes LIBCURLINCLUDE="$LIBCURL_CPPFLAGS" LIBCURLLIBS="$LIBCURL" LIBCURLCFLAGS="$LIBCURL_CPPFLAGS" AC_SUBST(LIBCURLINCLUDE) AC_SUBST(LIBCURLLIBS) - AC_SUBST(LIBCURLCFLAGS) - AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) - AC_SUBST(URIPARSER_DIR, uriparser) + AC_SUBST(LIBCURLCFLAGS) ], [ + _can_enable_check_curl=no AC_MSG_WARN([Skipping curl plugin]) AC_MSG_WARN([install libcurl libs to compile this plugin (see REQUIREMENTS).]) ]) + + dnl Check for uriparser library + URIPARSER_CHECK(yes, 0.7.5, [ + _can_enable_check_curl=yes + URIPARSERINCLUDE="$URIPARSER_CPPFLAGS" + URIPARSERLIBS="$URIPARSER" + URIPARSERCFLAGS="$URIPARSER_CPPFLAGS" + AC_SUBST(URIPARSERINCLUDE) + AC_SUBST(URIPARSERLIBS) + AC_SUBST(URIPARSERCFLAGS) + ], [ + _can_enable_check_curl=no + AC_MSG_WARN([Skipping curl plugin]) + AC_MSG_WARN([install the uriparser library to compile this plugin (see REQUIREMENTS).]) + ]) + + dnl prerequisites met, enable the plugin + if test x$_can_enable_check_curl = xyes; then + EXTRAS="$EXTRAS check_curl\$(EXEEXT)" + + dnl Enable bundled picohttpparser library (for now) + AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) + fi fi AM_CONDITIONAL([WITH_CHECK_CURL], [test "$enable_check_curl" = "yes"]) AM_COND_IF([WITH_CHECK_CURL], - [AC_CONFIG_FILES([plugins/picohttpparser/Makefile plugins/uriparser/Makefile])]) + [AC_CONFIG_FILES([plugins/picohttpparser/Makefile])]) dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface if test "$ac_cv_header_utmpx_h" = "no" -a "$ac_cv_header_wtsapi32_h" = "no" @@ -1910,4 +1934,5 @@ ACX_FEATURE([with],[trusted-path]) ACX_FEATURE([enable],[libtap]) ACX_FEATURE([enable],[check-curl]) ACX_FEATURE([with],[libcurl]) +ACX_FEATURE([with],[uriparser]) diff --git a/m4/uriparser.m4 b/m4/uriparser.m4 new file mode 100644 index 0000000..7fb25d6 --- /dev/null +++ b/m4/uriparser.m4 @@ -0,0 +1,137 @@ +# (this check is rougly based on and inspired libcurl.m4) +# URIPARSER_CHECK ([DEFAULT-ACTION], [MINIMUM-VERSION], +# [ACTION-IF-YES], [ACTION-IF-NO]) +# Checks for uriparser library. DEFAULT-ACTION is the string yes or no to +# specify whether to default to --with-uriparser or --without-liburiparser. +# If not supplied, DEFAULT-ACTION is yes. MINIMUM-VERSION is the +# minimum version of uriparser to accept. Pass the version as a regular +# version number like 0.8.5. If not supplied, any version is +# accepted. ACTION-IF-YES is a list of shell commands to run if +# uriparser was successfully found and passed the various tests. +# ACTION-IF-NO is a list of shell commands that are run otherwise. +# Note that using --without-uriparser does run ACTION-IF-NO. +# +# This macro #defines HAVE_URIPARSER if a working uriparser setup is +# found, and sets @URIPARSER@ and @URIPARSER_CPPFLAGS@ to the necessary +# values. +# +# Users may override the detected values by doing something like: +# URIPARSER="-luriparser" URIPARSER_CPPFLAGS="-I/usr/myinclude" ./configure +# + +AC_DEFUN([URIPARSER_CHECK], +[ + AC_ARG_WITH(uriparser, + AS_HELP_STRING([--with-uriparser=PREFIX],[look for the uriparser library in PREFIX/lib and headers in PREFIX/include]), + [_uriparser_with=$withval],[_uriparser_with=ifelse([$1],,[yes],[$1])]) + + if test "$_uriparser_with" != "no" ; then + + _uriparser_try_link=yes + + if test -d "$_uriparser_with" ; then + URIPARSER_CPPFLAGS="-I$withval/include" + _uriparser_ldflags="-L$withval/lib" + fi + + AC_CHECK_PROG(PKGCONFIG,pkg-config,pkg-config,no) + + if test x$PKGCONFIG != xno; then + + AC_CACHE_CHECK([for the version of uriparser], + [uriparser_cv_uriparser_version], + [uriparser_cv_uriparser_version=`$PKGCONFIG liburiparser --modversion`]) + + AC_PROG_AWK + + _uriparser_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'" + + _uriparser_version=`echo $uriparser_cv_uriparser_version | $_uriparser_version_parse` + _uriparser_wanted=`echo ifelse([$2],,[0],[$2]) | $_uriparser_version_parse` + + if test $_uriparser_wanted -gt 0 ; then + AC_CACHE_CHECK([for uriparser >= version $2], + [uriparser_cv_lib_version_ok], + [ + if test $_uriparser_version -ge $_uriparser_wanted ; then + uriparser_cv_lib_version_ok=yes + else + uriparser_cv_lib_version_ok=no + fi + ]) + fi + + if test $_uriparser_wanted -eq 0 || test x$uriparser_cv_lib_version_ok = xyes ; then + if test x"$URIPARSER_CPPFLAGS" = "x" ; then + URIPARSER_CPPFLAGS=`$PKGCONFIG liburiparser --cflags` + fi + if test x"$URIPARSER" = "x" ; then + URIPARSER=`$PKGCONFIG liburiparser --libs` + fi + else + _uriparser_try_link=no + fi + + unset _uriparser_wanted + fi + + if test $_uriparser_try_link = yes ; then + + # we didn't find curl-config, so let's see if the user-supplied + # link line (or failing that, "-luriparser") is enough. + URIPARSERLIBS=${URIPARSERLIBS-"$_uriparser_ldflags -luriparser"} + + AC_CACHE_CHECK([whether uriparser is usable], + [uriparser_cv_lib_uriparser_usable], + [ + _liburiparser_save_cppflags=$CPPFLAGS + CPPFLAGS="$URIPARSER_CPPFLAGS $CPPFLAGS" + _liburiparser_save_libs=$LIBS + LIBS="$URIPARSER $LIBS" + + AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]],[[ +/* Try and use a few common options to force a failure if we are + missing symbols or cannot link. */ +UriParserStateA state; +UriUriA uri; +state.uri = &uri; +char *location = "http://test.dom/dir/file.ext"; +int x = uriParseUriA (&state, location); +if (x == URI_SUCCESS) {;} +]])],uriparser_cv_lib_uriparser_usable=yes,uriparser_cv_lib_uriparser_usable=no) + + CPPFLAGS=$_liburiparser_save_cppflags + LIBS=$_liburiparser_save_libs + unset _liburiparser_save_cppflags + unset _liburiparser_save_libs + ]) + + if test $uriparser_cv_lib_uriparser_usable = yes ; then + AC_DEFINE(HAVE_URIPARSER,1, + [Define to 1 if you have a functional uriparser library.]) + AC_SUBST(URIPARSER_CPPFLAGS) + AC_SUBST(URIPARSER) + else + unset URIPARSER + unset URIPARSER_CPPFLAGS + fi + fi + + unset _uriparser_try_link + unset _uriparser_version_parse + unset _uriparser_version + unset _uriparser_ldflags + fi + + if test x$_uriparser_with = xno || test x$uriparser_cv_lib_uriparser_usable != xyes ; then + # This is the IF-NO path + ifelse([$4],,:,[$4]) + else + # This is the IF-YES path + ifelse([$3],,:,[$3]) + fi + + unset _uriparser_with +])dnl + + diff --git a/plugins/Makefile.am b/plugins/Makefile.am index 34a7da8..ee78177 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -40,7 +40,7 @@ EXTRA_PROGRAMS = check_mysql check_radius check_pgsql check_snmp check_hpjd \ check_nagios check_by_ssh check_dns check_nt check_ide_smart \ check_procs check_mysql_query check_apt check_dbi check_curl -SUBDIRS = @PICOHTTPPARSER_DIR@ @URIPARSER_DIR@ +SUBDIRS = @PICOHTTPPARSER_DIR@ EXTRA_DIST = t tests @@ -71,9 +71,9 @@ test-debug: check_apt_LDADD = $(BASEOBJS) check_cluster_LDADD = $(BASEOBJS) -check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) -Ipicohttpparser -Iuriparser -check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLINCLUDE) -Ipicohttpparser -Iuriparser -check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) picohttpparser/libpicohttpparser.a uriparser/liburiparser.a +check_curl_CFLAGS = $(AM_CFLAGS) $(LIBCURLCFLAGS) $(URIPARSERCFLAGS) $(LIBCURLINCLUDE) $(URIPARSERINCLUDE) -Ipicohttpparser +check_curl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCURLCFLAGS) $(URIPARSERCFLAGS) $(LIBCURLINCLUDE) $(URIPARSERINCLUDE) -Ipicohttpparser +check_curl_LDADD = $(NETLIBS) $(LIBCURLLIBS) $(SSLOBJS) $(URIPARSERLIBS) picohttpparser/libpicohttpparser.a check_dbi_LDADD = $(NETLIBS) $(DBILIBS) check_dig_LDADD = $(NETLIBS) check_disk_LDADD = $(BASEOBJS) diff --git a/plugins/uriparser/Makefile.am b/plugins/uriparser/Makefile.am deleted file mode 100644 index 703e6c5..0000000 --- a/plugins/uriparser/Makefile.am +++ /dev/null @@ -1,11 +0,0 @@ -noinst_LIBRARIES = liburiparser.a - -liburiparser_a_SOURCES = UriCommon.c UriCompare.c \ - UriEscape.c UriFile.c UriIp4.c \ - UriIp4Base.c UriNormalize.c \ - UriNormalizeBase.c UriParse.c \ - UriParseBase.c UriQuery.c \ - UriRecompose.c UriResolve.c \ - UriShorten.c - -liburiparser_a_CFLAGS = $(AM_CFLAGS) -I.. diff --git a/plugins/uriparser/Uri.h b/plugins/uriparser/Uri.h deleted file mode 100644 index a3f7914..0000000 --- a/plugins/uriparser/Uri.h +++ /dev/null @@ -1,779 +0,0 @@ -/* f9ca23a99fc1c8ff610e2bdc0bff3c4bb4d883ccbff5851fe7a1398f9b6aca57 (0.8.5+) - * - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file Uri.h - * Holds the RFC 3986 %URI parser interface. - * NOTE: This header includes itself twice. - */ - -#if (defined(URI_PASS_ANSI) && !defined(URI_H_ANSI)) \ - || (defined(URI_PASS_UNICODE) && !defined(URI_H_UNICODE)) \ - || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* What encodings are enabled? */ -#include "UriDefsConfig.h" -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "Uri.h" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "Uri.h" -# undef URI_PASS_UNICODE -# endif -/* Only one pass for each encoding */ -#elif (defined(URI_PASS_ANSI) && !defined(URI_H_ANSI) \ - && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ - && !defined(URI_H_UNICODE) && defined(URI_ENABLE_UNICODE)) -# ifdef URI_PASS_ANSI -# define URI_H_ANSI 1 -# include "UriDefsAnsi.h" -# else -# define URI_H_UNICODE 1 -# include "UriDefsUnicode.h" -# endif - - - -#ifdef __cplusplus -extern "C" { -#endif - - - -#ifndef URI_DOXYGEN -# include "UriBase.h" -#endif - - - -/** - * Specifies a range of characters within a string. - * The range includes all characters from first - * to one before afterLast. So if both are - * non-NULL the difference is the length of the text range. - * - * @see UriUriA - * @see UriPathSegmentA - * @see UriHostDataA - * @since 0.3.0 - */ -typedef struct URI_TYPE(TextRangeStruct) { - const URI_CHAR * first; /**< Pointer to first character */ - const URI_CHAR * afterLast; /**< Pointer to character after the last one still in */ -} URI_TYPE(TextRange); /**< @copydoc UriTextRangeStructA */ - - - -/** - * Represents a path segment within a %URI path. - * More precisely it is a node in a linked - * list of path segments. - * - * @see UriUriA - * @since 0.3.0 - */ -typedef struct URI_TYPE(PathSegmentStruct) { - URI_TYPE(TextRange) text; /**< Path segment name */ - struct URI_TYPE(PathSegmentStruct) * next; /**< Pointer to the next path segment in the list, can be NULL if last already */ - - void * reserved; /**< Reserved to the parser */ -} URI_TYPE(PathSegment); /**< @copydoc UriPathSegmentStructA */ - - - -/** - * Holds structured host information. - * This is either a IPv4, IPv6, plain - * text for IPvFuture or all zero for - * a registered name. - * - * @see UriUriA - * @since 0.3.0 - */ -typedef struct URI_TYPE(HostDataStruct) { - UriIp4 * ip4; /**< IPv4 address */ - UriIp6 * ip6; /**< IPv6 address */ - URI_TYPE(TextRange) ipFuture; /**< IPvFuture address */ -} URI_TYPE(HostData); /**< @copydoc UriHostDataStructA */ - - - -/** - * Represents an RFC 3986 %URI. - * Missing components can be {NULL, NULL} ranges. - * - * @see uriParseUriA - * @see uriFreeUriMembersA - * @see UriParserStateA - * @since 0.3.0 - */ -typedef struct URI_TYPE(UriStruct) { - URI_TYPE(TextRange) scheme; /**< Scheme (e.g. "http") */ - URI_TYPE(TextRange) userInfo; /**< User info (e.g. "user:pass") */ - URI_TYPE(TextRange) hostText; /**< Host text (set for all hosts, excluding square brackets) */ - URI_TYPE(HostData) hostData; /**< Structured host type specific data */ - URI_TYPE(TextRange) portText; /**< Port (e.g. "80") */ - URI_TYPE(PathSegment) * pathHead; /**< Head of a linked list of path segments */ - URI_TYPE(PathSegment) * pathTail; /**< Tail of the list behind pathHead */ - URI_TYPE(TextRange) query; /**< Query without leading "?" */ - URI_TYPE(TextRange) fragment; /**< Query without leading "#" */ - UriBool absolutePath; /**< Absolute path flag, distincting "a" and "/a"; - always URI_FALSE for URIs with host */ - UriBool owner; /**< Memory owner flag */ - - void * reserved; /**< Reserved to the parser */ -} URI_TYPE(Uri); /**< @copydoc UriUriStructA */ - - - -/** - * Represents a state of the %URI parser. - * Missing components can be NULL to reflect - * a components absence. - * - * @see uriFreeUriMembersA - * @since 0.3.0 - */ -typedef struct URI_TYPE(ParserStateStruct) { - URI_TYPE(Uri) * uri; /**< Plug in the %URI structure to be filled while parsing here */ - int errorCode; /**< Code identifying the occured error */ - const URI_CHAR * errorPos; /**< Pointer to position in case of a syntax error */ - - void * reserved; /**< Reserved to the parser */ -} URI_TYPE(ParserState); /**< @copydoc UriParserStateStructA */ - - - -/** - * Represents a query element. - * More precisely it is a node in a linked - * list of query elements. - * - * @since 0.7.0 - */ -typedef struct URI_TYPE(QueryListStruct) { - const URI_CHAR * key; /**< Key of the query element */ - const URI_CHAR * value; /**< Value of the query element, can be NULL */ - - struct URI_TYPE(QueryListStruct) * next; /**< Pointer to the next key/value pair in the list, can be NULL if last already */ -} URI_TYPE(QueryList); /**< @copydoc UriQueryListStructA */ - - - -/** - * Parses a RFC 3986 URI. - * - * @param state INOUT: Parser state with set output %URI, must not be NULL - * @param first IN: Pointer to the first character to parse, must not be NULL - * @param afterLast IN: Pointer to the character after the last to parse, must not be NULL - * @return 0 on success, error code otherwise - * - * @see uriParseUriA - * @see uriToStringA - * @since 0.3.0 - */ -int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, - const URI_CHAR * first, const URI_CHAR * afterLast); - - - -/** - * Parses a RFC 3986 %URI. - * - * @param state INOUT: Parser state with set output %URI, must not be NULL - * @param text IN: Text to parse, must not be NULL - * @return 0 on success, error code otherwise - * - * @see uriParseUriExA - * @see uriToStringA - * @since 0.3.0 - */ -int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, - const URI_CHAR * text); - - - -/** - * Frees all memory associated with the members - * of the %URI structure. Note that the structure - * itself is not freed, only its members. - * - * @param uri INOUT: %URI structure whose members should be freed - * - * @since 0.3.0 - */ -void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri); - - - -/** - * Percent-encodes all unreserved characters from the input string and - * writes the encoded version to the output string. - * Be sure to allocate 3 times the space of the input buffer for - * the output buffer for normalizeBreaks == URI_FALSE and 6 times - * the space for normalizeBreaks == URI_TRUE - * (since e.g. "\x0d" becomes "%0D%0A" in that case) - * - * @param inFirst IN: Pointer to first character of the input text - * @param inAfterLast IN: Pointer after the last character of the input text - * @param out OUT: Encoded text destination - * @param spaceToPlus IN: Wether to convert ' ' to '+' or not - * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. - * @return Position of terminator in output string - * - * @see uriEscapeA - * @see uriUnescapeInPlaceExA - * @since 0.5.2 - */ -URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst, - const URI_CHAR * inAfterLast, URI_CHAR * out, - UriBool spaceToPlus, UriBool normalizeBreaks); - - - -/** - * Percent-encodes all unreserved characters from the input string and - * writes the encoded version to the output string. - * Be sure to allocate 3 times the space of the input buffer for - * the output buffer for normalizeBreaks == URI_FALSE and 6 times - * the space for normalizeBreaks == URI_TRUE - * (since e.g. "\x0d" becomes "%0D%0A" in that case) - * - * @param in IN: Text source - * @param out OUT: Encoded text destination - * @param spaceToPlus IN: Wether to convert ' ' to '+' or not - * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. - * @return Position of terminator in output string - * - * @see uriEscapeExA - * @see uriUnescapeInPlaceA - * @since 0.5.0 - */ -URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out, - UriBool spaceToPlus, UriBool normalizeBreaks); - - - -/** - * Unescapes percent-encoded groups in a given string. - * E.g. "%20" will become " ". Unescaping is done in place. - * The return value will be point to the new position - * of the terminating zero. Use this value to get the new - * length of the string. NULL is only returned if inout - * is NULL. - * - * @param inout INOUT: Text to unescape/decode - * @param plusToSpace IN: Whether to convert '+' to ' ' or not - * @param breakConversion IN: Line break conversion mode - * @return Pointer to new position of the terminating zero - * - * @see uriUnescapeInPlaceA - * @see uriEscapeExA - * @since 0.5.0 - */ -const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout, - UriBool plusToSpace, UriBreakConversion breakConversion); - - - -/** - * Unescapes percent-encoded groups in a given string. - * E.g. "%20" will become " ". Unescaping is done in place. - * The return value will be point to the new position - * of the terminating zero. Use this value to get the new - * length of the string. NULL is only returned if inout - * is NULL. - * - * NOTE: '+' is not decoded to ' ' and line breaks are not converted. - * Use the more advanced UnescapeInPlaceEx for that features instead. - * - * @param inout INOUT: Text to unescape/decode - * @return Pointer to new position of the terminating zero - * - * @see uriUnescapeInPlaceExA - * @see uriEscapeA - * @since 0.3.0 - */ -const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout); - - - -/** - * Performs reference resolution as described in - * section 5.2.2 of RFC 3986. - * NOTE: On success you have to call uriFreeUriMembersA on \p absoluteDest manually later. - * - * @param absoluteDest OUT: Result %URI - * @param relativeSource IN: Reference to resolve - * @param absoluteBase IN: Base %URI to apply - * @return Error code or 0 on success - * - * @see uriRemoveBaseUriA, uriAddBaseUriExA - * @since 0.4.0 - */ -int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absoluteDest, - const URI_TYPE(Uri) * relativeSource, - const URI_TYPE(Uri) * absoluteBase); - - - -/** - * Performs reference resolution as described in - * section 5.2.2 of RFC 3986. - * NOTE: On success you have to call uriFreeUriMembersA on \p absoluteDest manually later. - * - * @param absoluteDest OUT: Result %URI - * @param relativeSource IN: Reference to resolve - * @param absoluteBase IN: Base %URI to apply - * @param options IN: Configuration to apply - * @return Error code or 0 on success - * - * @see uriRemoveBaseUriA, uriAddBaseUriA - * @since 0.8.1 - */ -int URI_FUNC(AddBaseUriEx)(URI_TYPE(Uri) * absoluteDest, - const URI_TYPE(Uri) * relativeSource, - const URI_TYPE(Uri) * absoluteBase, - UriResolutionOptions options); - - - -/** - * Tries to make a relative %URI (a reference) from an - * absolute %URI and a given base %URI. This can only work if - * the absolute %URI shares scheme and authority with - * the base %URI. If it does not the result will still be - * an absolute URI (with scheme part if necessary). - * NOTE: On success you have to call uriFreeUriMembersA on - * \p dest manually later. - * - * @param dest OUT: Result %URI - * @param absoluteSource IN: Absolute %URI to make relative - * @param absoluteBase IN: Base %URI - * @param domainRootMode IN: Create %URI with path relative to domain root - * @return Error code or 0 on success - * - * @see uriAddBaseUriA, uriAddBaseUriExA - * @since 0.5.2 - */ -int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest, - const URI_TYPE(Uri) * absoluteSource, - const URI_TYPE(Uri) * absoluteBase, - UriBool domainRootMode); - - - -/** - * Checks two URIs for equivalence. Comparison is done - * the naive way, without prior normalization. - * NOTE: Two NULL URIs are equal as well. - * - * @param a IN: First %URI - * @param b IN: Second %URI - * @return URI_TRUE when equal, URI_FAlSE else - * - * @since 0.4.0 - */ -UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a, const URI_TYPE(Uri) * b); - - - -/** - * Calculates the number of characters needed to store the - * string representation of the given %URI excluding the - * terminator. - * - * @param uri IN: %URI to measure - * @param charsRequired OUT: Length of the string representation in characters excluding terminator - * @return Error code or 0 on success - * - * @see uriToStringA - * @since 0.5.0 - */ -int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri, - int * charsRequired); - - - -/** - * Converts a %URI structure back to text as described in - * section 5.3 of RFC 3986. - * - * @param dest OUT: Output destination - * @param uri IN: %URI to convert - * @param maxChars IN: Maximum number of characters to copy including terminator - * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the %URI is too long! - * @return Error code or 0 on success - * - * @see uriToStringCharsRequiredA - * @since 0.4.0 - */ -int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten); - - - -/** - * Determines the components of a %URI that are not normalized. - * - * @param uri IN: %URI to check - * @return Normalization job mask - * - * @see uriNormalizeSyntaxA - * @since 0.5.0 - */ -unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri); - - - -/** - * Normalizes a %URI using a normalization mask. - * The normalization mask decides what components are normalized. - * - * NOTE: If necessary the %URI becomes owner of all memory - * behind the text pointed to. Text is duplicated in that case. - * - * @param uri INOUT: %URI to normalize - * @param mask IN: Normalization mask - * @return Error code or 0 on success - * - * @see uriNormalizeSyntaxA - * @see uriNormalizeSyntaxMaskRequiredA - * @since 0.5.0 - */ -int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask); - - - -/** - * Normalizes all components of a %URI. - * - * NOTE: If necessary the %URI becomes owner of all memory - * behind the text pointed to. Text is duplicated in that case. - * - * @param uri INOUT: %URI to normalize - * @return Error code or 0 on success - * - * @see uriNormalizeSyntaxExA - * @see uriNormalizeSyntaxMaskRequiredA - * @since 0.5.0 - */ -int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri); - - - -/** - * Converts a Unix filename to a %URI string. - * The destination buffer must be large enough to hold 7 + 3 * len(filename) + 1 - * characters in case of an absolute filename or 3 * len(filename) + 1 in case - * of a relative filename. - * - * EXAMPLE - * Input: "/bin/bash" - * Output: "file:///bin/bash" - * - * @param filename IN: Unix filename to convert - * @param uriString OUT: Destination to write %URI string to - * @return Error code or 0 on success - * - * @see uriUriStringToUnixFilenameA - * @see uriWindowsFilenameToUriStringA - * @since 0.5.2 - */ -int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, - URI_CHAR * uriString); - - - -/** - * Converts a Windows filename to a %URI string. - * The destination buffer must be large enough to hold 8 + 3 * len(filename) + 1 - * characters in case of an absolute filename or 3 * len(filename) + 1 in case - * of a relative filename. - * - * EXAMPLE - * Input: "E:\\Documents and Settings" - * Output: "file:///E:/Documents%20and%20Settings" - * - * @param filename IN: Windows filename to convert - * @param uriString OUT: Destination to write %URI string to - * @return Error code or 0 on success - * - * @see uriUriStringToWindowsFilenameA - * @see uriUnixFilenameToUriStringA - * @since 0.5.2 - */ -int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, - URI_CHAR * uriString); - - - -/** - * Extracts a Unix filename from a %URI string. - * The destination buffer must be large enough to hold len(uriString) + 1 - 7 - * characters in case of an absolute %URI or len(uriString) + 1 in case - * of a relative %URI. - * - * @param uriString IN: %URI string to convert - * @param filename OUT: Destination to write filename to - * @return Error code or 0 on success - * - * @see uriUnixFilenameToUriStringA - * @see uriUriStringToWindowsFilenameA - * @since 0.5.2 - */ -int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, - URI_CHAR * filename); - - - -/** - * Extracts a Windows filename from a %URI string. - * The destination buffer must be large enough to hold len(uriString) + 1 - 5 - * characters in case of an absolute %URI or len(uriString) + 1 in case - * of a relative %URI. - * - * @param uriString IN: %URI string to convert - * @param filename OUT: Destination to write filename to - * @return Error code or 0 on success - * - * @see uriWindowsFilenameToUriStringA - * @see uriUriStringToUnixFilenameA - * @since 0.5.2 - */ -int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, - URI_CHAR * filename); - - - -/** - * Calculates the number of characters needed to store the - * string representation of the given query list excluding the - * terminator. It is assumed that line breaks are will be - * normalized to "%0D%0A". - * - * @param queryList IN: Query list to measure - * @param charsRequired OUT: Length of the string representation in characters excluding terminator - * @return Error code or 0 on success - * - * @see uriComposeQueryCharsRequiredExA - * @see uriComposeQueryA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList, - int * charsRequired); - - - -/** - * Calculates the number of characters needed to store the - * string representation of the given query list excluding the - * terminator. - * - * @param queryList IN: Query list to measure - * @param charsRequired OUT: Length of the string representation in characters excluding terminator - * @param spaceToPlus IN: Wether to convert ' ' to '+' or not - * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. - * @return Error code or 0 on success - * - * @see uriComposeQueryCharsRequiredA - * @see uriComposeQueryExA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList, - int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks); - - - -/** - * Converts a query list structure back to a query string. - * The composed string does not start with '?', - * on the way ' ' is converted to '+' and line breaks are - * normalized to "%0D%0A". - * - * @param dest OUT: Output destination - * @param queryList IN: Query list to convert - * @param maxChars IN: Maximum number of characters to copy including terminator - * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the query list is too long! - * @return Error code or 0 on success - * - * @see uriComposeQueryExA - * @see uriComposeQueryMallocA - * @see uriComposeQueryCharsRequiredA - * @see uriDissectQueryMallocA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQuery)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten); - - - -/** - * Converts a query list structure back to a query string. - * The composed string does not start with '?'. - * - * @param dest OUT: Output destination - * @param queryList IN: Query list to convert - * @param maxChars IN: Maximum number of characters to copy including terminator - * @param charsWritten OUT: Number of characters written, can be lower than maxChars even if the query list is too long! - * @param spaceToPlus IN: Wether to convert ' ' to '+' or not - * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. - * @return Error code or 0 on success - * - * @see uriComposeQueryA - * @see uriComposeQueryMallocExA - * @see uriComposeQueryCharsRequiredExA - * @see uriDissectQueryMallocExA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten, - UriBool spaceToPlus, UriBool normalizeBreaks); - - - -/** - * Converts a query list structure back to a query string. - * Memory for this string is allocated internally. - * The composed string does not start with '?', - * on the way ' ' is converted to '+' and line breaks are - * normalized to "%0D%0A". - * - * @param dest OUT: Output destination - * @param queryList IN: Query list to convert - * @return Error code or 0 on success - * - * @see uriComposeQueryMallocExA - * @see uriComposeQueryA - * @see uriDissectQueryMallocA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest, - const URI_TYPE(QueryList) * queryList); - - - -/** - * Converts a query list structure back to a query string. - * Memory for this string is allocated internally. - * The composed string does not start with '?'. - * - * @param dest OUT: Output destination - * @param queryList IN: Query list to convert - * @param spaceToPlus IN: Wether to convert ' ' to '+' or not - * @param normalizeBreaks IN: Wether to convert CR and LF to CR-LF or not. - * @return Error code or 0 on success - * - * @see uriComposeQueryMallocA - * @see uriComposeQueryExA - * @see uriDissectQueryMallocExA - * @since 0.7.0 - */ -int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest, - const URI_TYPE(QueryList) * queryList, - UriBool spaceToPlus, UriBool normalizeBreaks); - - - -/** - * Constructs a query list from the raw query string of a given URI. - * On the way '+' is converted back to ' ', line breaks are not modified. - * - * @param dest OUT: Output destination - * @param itemCount OUT: Number of items found, can be NULL - * @param first IN: Pointer to first character after '?' - * @param afterLast IN: Pointer to character after the last one still in - * @return Error code or 0 on success - * - * @see uriDissectQueryMallocExA - * @see uriComposeQueryA - * @see uriFreeQueryListA - * @since 0.7.0 - */ -int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount, - const URI_CHAR * first, const URI_CHAR * afterLast); - - - -/** - * Constructs a query list from the raw query string of a given URI. - * - * @param dest OUT: Output destination - * @param itemCount OUT: Number of items found, can be NULL - * @param first IN: Pointer to first character after '?' - * @param afterLast IN: Pointer to character after the last one still in - * @param plusToSpace IN: Whether to convert '+' to ' ' or not - * @param breakConversion IN: Line break conversion mode - * @return Error code or 0 on success - * - * @see uriDissectQueryMallocA - * @see uriComposeQueryExA - * @see uriFreeQueryListA - * @since 0.7.0 - */ -int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount, - const URI_CHAR * first, const URI_CHAR * afterLast, - UriBool plusToSpace, UriBreakConversion breakConversion); - - - -/** - * Frees all memory associated with the given query list. - * The structure itself is freed as well. - * - * @param queryList INOUT: Query list to free - * - * @since 0.7.0 - */ -void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList); - - - -#ifdef __cplusplus -} -#endif - - - -#endif -#endif diff --git a/plugins/uriparser/UriBase.h b/plugins/uriparser/UriBase.h deleted file mode 100644 index 45ba5ab..0000000 --- a/plugins/uriparser/UriBase.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriBase.h - * Holds definitions independent of the encoding pass. - */ - -#ifndef URI_BASE_H -#define URI_BASE_H 1 - - - -/* Version helper macro */ -#define URI_ANSI_TO_UNICODE(x) L##x - - - -/* Version */ -#define URI_VER_MAJOR 0 -#define URI_VER_MINOR 8 -#define URI_VER_RELEASE 5 -#define URI_VER_SUFFIX_ANSI "" -#define URI_VER_SUFFIX_UNICODE URI_ANSI_TO_UNICODE(URI_VER_SUFFIX_ANSI) - - - -/* More version helper macros */ -#define URI_INT_TO_ANSI_HELPER(x) #x -#define URI_INT_TO_ANSI(x) URI_INT_TO_ANSI_HELPER(x) - -#define URI_INT_TO_UNICODE_HELPER(x) URI_ANSI_TO_UNICODE(#x) -#define URI_INT_TO_UNICODE(x) URI_INT_TO_UNICODE_HELPER(x) - -#define URI_VER_ANSI_HELPER(ma, mi, r, s) \ - URI_INT_TO_ANSI(ma) "." \ - URI_INT_TO_ANSI(mi) "." \ - URI_INT_TO_ANSI(r) \ - s - -#define URI_VER_UNICODE_HELPER(ma, mi, r, s) \ - URI_INT_TO_UNICODE(ma) L"." \ - URI_INT_TO_UNICODE(mi) L"." \ - URI_INT_TO_UNICODE(r) \ - s - - - -/* Full version strings */ -#define URI_VER_ANSI URI_VER_ANSI_HELPER(URI_VER_MAJOR, URI_VER_MINOR, URI_VER_RELEASE, URI_VER_SUFFIX_ANSI) -#define URI_VER_UNICODE URI_VER_UNICODE_HELPER(URI_VER_MAJOR, URI_VER_MINOR, URI_VER_RELEASE, URI_VER_SUFFIX_UNICODE) - - - -/* Unused parameter macro */ -#ifdef __GNUC__ -# define URI_UNUSED(x) unused_##x __attribute__((unused)) -#else -# define URI_UNUSED(x) x -#endif - - - -typedef int UriBool; /**< Boolean type */ - -#define URI_TRUE 1 -#define URI_FALSE 0 - - - -/* Shared errors */ -#define URI_SUCCESS 0 -#define URI_ERROR_SYNTAX 1 /* Parsed text violates expected format */ -#define URI_ERROR_NULL 2 /* One of the params passed was NULL - although it mustn't be */ -#define URI_ERROR_MALLOC 3 /* Requested memory could not be allocated */ -#define URI_ERROR_OUTPUT_TOO_LARGE 4 /* Some output is to large for the receiving buffer */ -#define URI_ERROR_NOT_IMPLEMENTED 8 /* The called function is not implemented yet */ -#define URI_ERROR_RANGE_INVALID 9 /* The parameters passed contained invalid ranges */ - - -/* Errors specific to ToString */ -#define URI_ERROR_TOSTRING_TOO_LONG URI_ERROR_OUTPUT_TOO_LARGE /* Deprecated, test for URI_ERROR_OUTPUT_TOO_LARGE instead */ - -/* Errors specific to AddBaseUri */ -#define URI_ERROR_ADDBASE_REL_BASE 5 /* Given base is not absolute */ - -/* Errors specific to RemoveBaseUri */ -#define URI_ERROR_REMOVEBASE_REL_BASE 6 /* Given base is not absolute */ -#define URI_ERROR_REMOVEBASE_REL_SOURCE 7 /* Given base is not absolute */ - - - -#ifndef URI_DOXYGEN -# include /* For NULL, snprintf */ -# include /* For wchar_t */ -# include /* For strlen, memset, memcpy */ -# include /* For malloc */ -#endif /* URI_DOXYGEN */ - - - -/** - * Holds an IPv4 address. - */ -typedef struct UriIp4Struct { - unsigned char data[4]; /**< Each octet in one byte */ -} UriIp4; /**< @copydoc UriIp4Struct */ - - - -/** - * Holds an IPv6 address. - */ -typedef struct UriIp6Struct { - unsigned char data[16]; /**< Each quad in two bytes */ -} UriIp6; /**< @copydoc UriIp6Struct */ - - - -/** - * Specifies a line break conversion mode. - */ -typedef enum UriBreakConversionEnum { - URI_BR_TO_LF, /**< Convert to Unix line breaks ("\\x0a") */ - URI_BR_TO_CRLF, /**< Convert to Windows line breaks ("\\x0d\\x0a") */ - URI_BR_TO_CR, /**< Convert to Macintosh line breaks ("\\x0d") */ - URI_BR_TO_UNIX = URI_BR_TO_LF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_LF */ - URI_BR_TO_WINDOWS = URI_BR_TO_CRLF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CRLF */ - URI_BR_TO_MAC = URI_BR_TO_CR, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CR */ - URI_BR_DONT_TOUCH /**< Copy line breaks unmodified */ -} UriBreakConversion; /**< @copydoc UriBreakConversionEnum */ - - - -/** - * Specifies which component of a %URI has to be normalized. - */ -typedef enum UriNormalizationMaskEnum { - URI_NORMALIZED = 0, /**< Do not normalize anything */ - URI_NORMALIZE_SCHEME = 1 << 0, /**< Normalize scheme (fix uppercase letters) */ - URI_NORMALIZE_USER_INFO = 1 << 1, /**< Normalize user info (fix uppercase percent-encodings) */ - URI_NORMALIZE_HOST = 1 << 2, /**< Normalize host (fix uppercase letters) */ - URI_NORMALIZE_PATH = 1 << 3, /**< Normalize path (fix uppercase percent-encodings and redundant dot segments) */ - URI_NORMALIZE_QUERY = 1 << 4, /**< Normalize query (fix uppercase percent-encodings) */ - URI_NORMALIZE_FRAGMENT = 1 << 5 /**< Normalize fragment (fix uppercase percent-encodings) */ -} UriNormalizationMask; /**< @copydoc UriNormalizationMaskEnum */ - - - -/** - * Specifies how to resolve %URI references. - */ -typedef enum UriResolutionOptionsEnum { - URI_RESOLVE_STRICTLY = 0, /**< Full RFC conformance */ - URI_RESOLVE_IDENTICAL_SCHEME_COMPAT = 1 << 0 /**< Treat %URI to resolve with identical scheme as having no scheme */ -} UriResolutionOptions; /**< @copydoc UriResolutionOptionsEnum */ - - - -#endif /* URI_BASE_H */ diff --git a/plugins/uriparser/UriCommon.c b/plugins/uriparser/UriCommon.c deleted file mode 100644 index 571d6d4..0000000 --- a/plugins/uriparser/UriCommon.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriCommon.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriCommon.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -/*extern*/ const URI_CHAR * const URI_FUNC(SafeToPointTo) = _UT("X"); -/*extern*/ const URI_CHAR * const URI_FUNC(ConstPwd) = _UT("."); -/*extern*/ const URI_CHAR * const URI_FUNC(ConstParent) = _UT(".."); - - - -void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri) { - memset(uri, 0, sizeof(URI_TYPE(Uri))); -} - - - -/* Compares two text ranges for equal text content */ -int URI_FUNC(CompareRange)( - const URI_TYPE(TextRange) * a, - const URI_TYPE(TextRange) * b) { - int diff; - - /* NOTE: Both NULL means equal! */ - if ((a == NULL) || (b == NULL)) { - return ((a == NULL) ? 0 : 1) - ((b == NULL) ? 0 : 1); - } - - /* NOTE: Both NULL means equal! */ - if ((a->first == NULL) || (b->first == NULL)) { - return ((a->first == NULL) ? 0 : 1) - ((b->first == NULL) ? 0 : 1); - } - - diff = ((int)(a->afterLast - a->first) - (int)(b->afterLast - b->first)); - if (diff > 0) { - return 1; - } else if (diff < 0) { - return -1; - } - - diff = URI_STRNCMP(a->first, b->first, (a->afterLast - a->first)); - - if (diff > 0) { - return 1; - } else if (diff < 0) { - return -1; - } - - return diff; -} - - - -/* Properly removes "." and ".." path segments */ -UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri, - UriBool relative) { - if (uri == NULL) { - return URI_TRUE; - } - return URI_FUNC(RemoveDotSegmentsEx)(uri, relative, uri->owner); -} - - - -UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri, - UriBool relative, UriBool pathOwned) { - URI_TYPE(PathSegment) * walker; - if ((uri == NULL) || (uri->pathHead == NULL)) { - return URI_TRUE; - } - - walker = uri->pathHead; - walker->reserved = NULL; /* Prev pointer */ - do { - UriBool removeSegment = URI_FALSE; - int len = (int)(walker->text.afterLast - walker->text.first); - switch (len) { - case 1: - if ((walker->text.first)[0] == _UT('.')) { - /* "." segment -> remove if not essential */ - URI_TYPE(PathSegment) * const prev = walker->reserved; - URI_TYPE(PathSegment) * const nextBackup = walker->next; - - /* Is this dot segment essential? */ - removeSegment = URI_TRUE; - if (relative && (walker == uri->pathHead) && (walker->next != NULL)) { - const URI_CHAR * ch = walker->next->text.first; - for (; ch < walker->next->text.afterLast; ch++) { - if (*ch == _UT(':')) { - removeSegment = URI_FALSE; - break; - } - } - } - - if (removeSegment) { - /* Last segment? */ - if (walker->next != NULL) { - /* Not last segment */ - walker->next->reserved = prev; - - if (prev == NULL) { - /* First but not last segment */ - uri->pathHead = walker->next; - } else { - /* Middle segment */ - prev->next = walker->next; - } - - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - } else { - /* Last segment */ - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - - if (prev == NULL) { - /* Last and first */ - if (URI_FUNC(IsHostSet)(uri)) { - /* Replace "." with empty segment to represent trailing slash */ - walker->text.first = URI_FUNC(SafeToPointTo); - walker->text.afterLast = URI_FUNC(SafeToPointTo); - } else { - free(walker); - - uri->pathHead = NULL; - uri->pathTail = NULL; - } - } else { - /* Last but not first, replace "." with empty segment to represent trailing slash */ - walker->text.first = URI_FUNC(SafeToPointTo); - walker->text.afterLast = URI_FUNC(SafeToPointTo); - } - } - - walker = nextBackup; - } - } - break; - - case 2: - if (((walker->text.first)[0] == _UT('.')) - && ((walker->text.first)[1] == _UT('.'))) { - /* Path ".." -> remove this and the previous segment */ - URI_TYPE(PathSegment) * const prev = walker->reserved; - URI_TYPE(PathSegment) * prevPrev; - URI_TYPE(PathSegment) * const nextBackup = walker->next; - - removeSegment = URI_TRUE; - if (relative) { - if (prev == NULL) { - removeSegment = URI_FALSE; - } else if ((prev != NULL) - && ((prev->text.afterLast - prev->text.first) == 2) - && ((prev->text.first)[0] == _UT('.')) - && ((prev->text.first)[1] == _UT('.'))) { - removeSegment = URI_FALSE; - } - } - - if (removeSegment) { - if (prev != NULL) { - /* Not first segment */ - prevPrev = prev->reserved; - if (prevPrev != NULL) { - /* Not even prev is the first one */ - prevPrev->next = walker->next; - if (walker->next != NULL) { - walker->next->reserved = prevPrev; - } else { - /* Last segment -> insert "" segment to represent trailing slash, update tail */ - URI_TYPE(PathSegment) * const segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); - if (segment == NULL) { - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - - if (pathOwned && (prev->text.first != prev->text.afterLast)) { - free((URI_CHAR *)prev->text.first); - } - free(prev); - - return URI_FALSE; /* Raises malloc error */ - } - memset(segment, 0, sizeof(URI_TYPE(PathSegment))); - segment->text.first = URI_FUNC(SafeToPointTo); - segment->text.afterLast = URI_FUNC(SafeToPointTo); - prevPrev->next = segment; - uri->pathTail = segment; - } - - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - - if (pathOwned && (prev->text.first != prev->text.afterLast)) { - free((URI_CHAR *)prev->text.first); - } - free(prev); - - walker = nextBackup; - } else { - /* Prev is the first segment */ - if (walker->next != NULL) { - uri->pathHead = walker->next; - walker->next->reserved = NULL; - - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - } else { - /* Re-use segment for "" path segment to represent trailing slash, update tail */ - URI_TYPE(PathSegment) * const segment = walker; - if (pathOwned && (segment->text.first != segment->text.afterLast)) { - free((URI_CHAR *)segment->text.first); - } - segment->text.first = URI_FUNC(SafeToPointTo); - segment->text.afterLast = URI_FUNC(SafeToPointTo); - uri->pathHead = segment; - uri->pathTail = segment; - } - - if (pathOwned && (prev->text.first != prev->text.afterLast)) { - free((URI_CHAR *)prev->text.first); - } - free(prev); - - walker = nextBackup; - } - } else { - URI_TYPE(PathSegment) * const anotherNextBackup = walker->next; - /* First segment -> update head pointer */ - uri->pathHead = walker->next; - if (walker->next != NULL) { - walker->next->reserved = NULL; - } else { - /* Last segment -> update tail */ - uri->pathTail = NULL; - } - - if (pathOwned && (walker->text.first != walker->text.afterLast)) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - - walker = anotherNextBackup; - } - } - } - break; - - } - - if (!removeSegment) { - if (walker->next != NULL) { - walker->next->reserved = walker; - } else { - /* Last segment -> update tail */ - uri->pathTail = walker; - } - walker = walker->next; - } - } while (walker != NULL); - - return URI_TRUE; -} - - - -/* Properly removes "." and ".." path segments */ -UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri) { - const UriBool ABSOLUTE = URI_FALSE; - return URI_FUNC(RemoveDotSegments)(uri, ABSOLUTE); -} - - - -unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig) { - switch (hexdig) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - return (unsigned char)(9 + hexdig - _UT('9')); - - case _UT('a'): - case _UT('b'): - case _UT('c'): - case _UT('d'): - case _UT('e'): - case _UT('f'): - return (unsigned char)(15 + hexdig - _UT('f')); - - case _UT('A'): - case _UT('B'): - case _UT('C'): - case _UT('D'): - case _UT('E'): - case _UT('F'): - return (unsigned char)(15 + hexdig - _UT('F')); - - default: - return 0; - } -} - - - -URI_CHAR URI_FUNC(HexToLetter)(unsigned int value) { - /* Uppercase recommended in section 2.1. of RFC 3986 * - * http://tools.ietf.org/html/rfc3986#section-2.1 */ - return URI_FUNC(HexToLetterEx)(value, URI_TRUE); -} - - - -URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase) { - switch (value) { - case 0: return _UT('0'); - case 1: return _UT('1'); - case 2: return _UT('2'); - case 3: return _UT('3'); - case 4: return _UT('4'); - case 5: return _UT('5'); - case 6: return _UT('6'); - case 7: return _UT('7'); - case 8: return _UT('8'); - case 9: return _UT('9'); - - case 10: return (uppercase == URI_TRUE) ? _UT('A') : _UT('a'); - case 11: return (uppercase == URI_TRUE) ? _UT('B') : _UT('b'); - case 12: return (uppercase == URI_TRUE) ? _UT('C') : _UT('c'); - case 13: return (uppercase == URI_TRUE) ? _UT('D') : _UT('d'); - case 14: return (uppercase == URI_TRUE) ? _UT('E') : _UT('e'); - default: return (uppercase == URI_TRUE) ? _UT('F') : _UT('f'); - } -} - - - -/* Checks if a URI has the host component set. */ -UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri) { - return (uri != NULL) - && ((uri->hostText.first != NULL) - || (uri->hostData.ip4 != NULL) - || (uri->hostData.ip6 != NULL) - || (uri->hostData.ipFuture.first != NULL) - ); -} - - - -/* Copies the path segment list from one URI to another. */ -UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, - const URI_TYPE(Uri) * source) { - if (source->pathHead == NULL) { - /* No path component */ - dest->pathHead = NULL; - dest->pathTail = NULL; - } else { - /* Copy list but not the text contained */ - URI_TYPE(PathSegment) * sourceWalker = source->pathHead; - URI_TYPE(PathSegment) * destPrev = NULL; - do { - URI_TYPE(PathSegment) * cur = malloc(sizeof(URI_TYPE(PathSegment))); - if (cur == NULL) { - /* Fix broken list */ - if (destPrev != NULL) { - destPrev->next = NULL; - } - return URI_FALSE; /* Raises malloc error */ - } - - /* From this functions usage we know that * - * the dest URI cannot be uri->owner */ - cur->text = sourceWalker->text; - if (destPrev == NULL) { - /* First segment ever */ - dest->pathHead = cur; - } else { - destPrev->next = cur; - } - destPrev = cur; - sourceWalker = sourceWalker->next; - } while (sourceWalker != NULL); - dest->pathTail = destPrev; - dest->pathTail->next = NULL; - } - - dest->absolutePath = source->absolutePath; - return URI_TRUE; -} - - - -/* Copies the authority part of an URI over to another. */ -UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, - const URI_TYPE(Uri) * source) { - /* From this functions usage we know that * - * the dest URI cannot be uri->owner */ - - /* Copy userInfo */ - dest->userInfo = source->userInfo; - - /* Copy hostText */ - dest->hostText = source->hostText; - - /* Copy hostData */ - if (source->hostData.ip4 != NULL) { - dest->hostData.ip4 = malloc(sizeof(UriIp4)); - if (dest->hostData.ip4 == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - *(dest->hostData.ip4) = *(source->hostData.ip4); - dest->hostData.ip6 = NULL; - dest->hostData.ipFuture.first = NULL; - dest->hostData.ipFuture.afterLast = NULL; - } else if (source->hostData.ip6 != NULL) { - dest->hostData.ip4 = NULL; - dest->hostData.ip6 = malloc(sizeof(UriIp6)); - if (dest->hostData.ip6 == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - *(dest->hostData.ip6) = *(source->hostData.ip6); - dest->hostData.ipFuture.first = NULL; - dest->hostData.ipFuture.afterLast = NULL; - } else { - dest->hostData.ip4 = NULL; - dest->hostData.ip6 = NULL; - dest->hostData.ipFuture = source->hostData.ipFuture; - } - - /* Copy portText */ - dest->portText = source->portText; - - return URI_TRUE; -} - - - -UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri) { - URI_TYPE(PathSegment) * segment; - - if ( /* Case 1: absolute path, empty first segment */ - (uri->absolutePath - && (uri->pathHead != NULL) - && (uri->pathHead->text.afterLast == uri->pathHead->text.first)) - - /* Case 2: relative path, empty first and second segment */ - || (!uri->absolutePath - && (uri->pathHead != NULL) - && (uri->pathHead->next != NULL) - && (uri->pathHead->text.afterLast == uri->pathHead->text.first) - && (uri->pathHead->next->text.afterLast == uri->pathHead->next->text.first))) { - /* NOOP */ - } else { - return URI_TRUE; - } - - segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); - if (segment == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - - /* Insert "." segment in front */ - segment->next = uri->pathHead; - segment->text.first = URI_FUNC(ConstPwd); - segment->text.afterLast = URI_FUNC(ConstPwd) + 1; - uri->pathHead = segment; - return URI_TRUE; -} - - - -void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri) { - /* Fix path if only one empty segment */ - if (!uri->absolutePath - && !URI_FUNC(IsHostSet)(uri) - && (uri->pathHead != NULL) - && (uri->pathHead->next == NULL) - && (uri->pathHead->text.first == uri->pathHead->text.afterLast)) { - free(uri->pathHead); - uri->pathHead = NULL; - uri->pathTail = NULL; - } -} - - - -#endif diff --git a/plugins/uriparser/UriCommon.h b/plugins/uriparser/UriCommon.h deleted file mode 100644 index f6bc2cc..0000000 --- a/plugins/uriparser/UriCommon.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#if (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI)) \ - || (defined(URI_PASS_UNICODE) && !defined(URI_COMMON_H_UNICODE)) \ - || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriCommon.h" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriCommon.h" -# undef URI_PASS_UNICODE -# endif -/* Only one pass for each encoding */ -#elif (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI) \ - && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ - && !defined(URI_COMMON_H_UNICODE) && defined(URI_ENABLE_UNICODE)) -# ifdef URI_PASS_ANSI -# define URI_COMMON_H_ANSI 1 -# include -# else -# define URI_COMMON_H_UNICODE 1 -# include -# endif - - - -/* Used to point to from empty path segments. - * X.first and X.afterLast must be the same non-NULL value then. */ -extern const URI_CHAR * const URI_FUNC(SafeToPointTo); -extern const URI_CHAR * const URI_FUNC(ConstPwd); -extern const URI_CHAR * const URI_FUNC(ConstParent); - - - -void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri); - -int URI_FUNC(CompareRange)( - const URI_TYPE(TextRange) * a, - const URI_TYPE(TextRange) * b); - -UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri); -UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri, UriBool relative); -UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri, - UriBool relative, UriBool pathOwned); - -unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig); -URI_CHAR URI_FUNC(HexToLetter)(unsigned int value); -URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase); - -UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri); - -UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source); -UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source); - -UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri); -void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri); - - -#endif -#endif diff --git a/plugins/uriparser/UriCompare.c b/plugins/uriparser/UriCompare.c deleted file mode 100644 index 35f5a13..0000000 --- a/plugins/uriparser/UriCompare.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriCompare.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriCompare.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include -# include "UriCommon.h" -#endif - - - -UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a, - const URI_TYPE(Uri) * b) { - /* NOTE: Both NULL means equal! */ - if ((a == NULL) || (b == NULL)) { - return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE; - } - - /* scheme */ - if (URI_FUNC(CompareRange)(&(a->scheme), &(b->scheme))) { - return URI_FALSE; - } - - /* absolutePath */ - if ((a->scheme.first == NULL)&& (a->absolutePath != b->absolutePath)) { - return URI_FALSE; - } - - /* userInfo */ - if (URI_FUNC(CompareRange)(&(a->userInfo), &(b->userInfo))) { - return URI_FALSE; - } - - /* Host */ - if (((a->hostData.ip4 == NULL) != (b->hostData.ip4 == NULL)) - || ((a->hostData.ip6 == NULL) != (b->hostData.ip6 == NULL)) - || ((a->hostData.ipFuture.first == NULL) - != (b->hostData.ipFuture.first == NULL))) { - return URI_FALSE; - } - - if (a->hostData.ip4 != NULL) { - if (memcmp(a->hostData.ip4->data, b->hostData.ip4->data, 4)) { - return URI_FALSE; - } - } - - if (a->hostData.ip6 != NULL) { - if (memcmp(a->hostData.ip6->data, b->hostData.ip6->data, 16)) { - return URI_FALSE; - } - } - - if (a->hostData.ipFuture.first != NULL) { - if (URI_FUNC(CompareRange)(&(a->hostData.ipFuture), &(b->hostData.ipFuture))) { - return URI_FALSE; - } - } - - if ((a->hostData.ip4 == NULL) - && (a->hostData.ip6 == NULL) - && (a->hostData.ipFuture.first == NULL)) { - if (URI_FUNC(CompareRange)(&(a->hostText), &(b->hostText))) { - return URI_FALSE; - } - } - - /* portText */ - if (URI_FUNC(CompareRange)(&(a->portText), &(b->portText))) { - return URI_FALSE; - } - - /* Path */ - if ((a->pathHead == NULL) != (b->pathHead == NULL)) { - return URI_FALSE; - } - - if (a->pathHead != NULL) { - URI_TYPE(PathSegment) * walkA = a->pathHead; - URI_TYPE(PathSegment) * walkB = b->pathHead; - do { - if (URI_FUNC(CompareRange)(&(walkA->text), &(walkB->text))) { - return URI_FALSE; - } - if ((walkA->next == NULL) != (walkB->next == NULL)) { - return URI_FALSE; - } - walkA = walkA->next; - walkB = walkB->next; - } while (walkA != NULL); - } - - /* query */ - if (URI_FUNC(CompareRange)(&(a->query), &(b->query))) { - return URI_FALSE; - } - - /* fragment */ - if (URI_FUNC(CompareRange)(&(a->fragment), &(b->fragment))) { - return URI_FALSE; - } - - return URI_TRUE; /* Equal*/ -} - - - -#endif diff --git a/plugins/uriparser/UriDefsAnsi.h b/plugins/uriparser/UriDefsAnsi.h deleted file mode 100644 index d6dbcad..0000000 --- a/plugins/uriparser/UriDefsAnsi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriDefsAnsi.h - * Holds definitions for the ANSI pass. - * NOTE: This header is included N times, not once. - */ - -/* Allow multi inclusion */ -#include "UriDefsConfig.h" - - - -#undef URI_CHAR -#define URI_CHAR char - -#undef _UT -#define _UT(x) x - - - -#undef URI_FUNC -#define URI_FUNC(x) uri##x##A - -#undef URI_TYPE -#define URI_TYPE(x) Uri##x##A - - - -#undef URI_STRLEN -#define URI_STRLEN strlen -#undef URI_STRCPY -#define URI_STRCPY strcpy -#undef URI_STRCMP -#define URI_STRCMP strcmp -#undef URI_STRNCMP -#define URI_STRNCMP strncmp - -/* TODO Remove on next source-compatibility break */ -#undef URI_SNPRINTF -#if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32)) -# define URI_SNPRINTF _snprintf -#else -# define URI_SNPRINTF snprintf -#endif diff --git a/plugins/uriparser/UriDefsConfig.h b/plugins/uriparser/UriDefsConfig.h deleted file mode 100644 index 9f7ac65..0000000 --- a/plugins/uriparser/UriDefsConfig.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriDefsConfig.h - * Adjusts the internal configuration after processing external definitions. - */ - -#ifndef URI_DEFS_CONFIG_H -#define URI_DEFS_CONFIG_H 1 - - - -/* Deny external overriding */ -#undef URI_ENABLE_ANSI /* Internal for !URI_NO_ANSI */ -#undef URI_ENABLE_UNICODE /* Internal for !URI_NO_UNICODE */ - - - -/* Encoding */ -#ifdef URI_NO_ANSI -# ifdef URI_NO_UNICODE -/* No encoding at all */ -# error URI_NO_ANSI and URI_NO_UNICODE cannot go together. -# else -/* Unicode only */ -# define URI_ENABLE_UNICODE 1 -# endif -#else -# ifdef URI_NO_UNICODE -/* ANSI only */ -# define URI_ENABLE_ANSI 1 -# else -/* Both ANSI and Unicode */ -# define URI_ENABLE_ANSI 1 -# define URI_ENABLE_UNICODE 1 -# endif -#endif - - - -/* Function inlining, not ANSI/ISO C! */ -#if (defined(URI_DOXYGEN) || defined(URI_SIZEDOWN)) -# define URI_INLINE -#elif defined(__INTEL_COMPILER) -/* Intel C/C++ */ -/* http://predef.sourceforge.net/precomp.html#sec20 */ -/* http://www.intel.com/support/performancetools/c/windows/sb/CS-007751.htm#2 */ -# define URI_INLINE __force_inline -#elif defined(_MSC_VER) -/* Microsoft Visual C++ */ -/* http://predef.sourceforge.net/precomp.html#sec32 */ -/* http://msdn2.microsoft.com/en-us/library/ms882281.aspx */ -# define URI_INLINE __forceinline -#elif (defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)) -/* C99, "inline" is a keyword */ -# define URI_INLINE inline -#else -/* No inlining */ -# define URI_INLINE -#endif - - - -#endif /* URI_DEFS_CONFIG_H */ diff --git a/plugins/uriparser/UriDefsUnicode.h b/plugins/uriparser/UriDefsUnicode.h deleted file mode 100644 index 8bb8bc2..0000000 --- a/plugins/uriparser/UriDefsUnicode.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriDefsUnicode.h - * Holds definitions for the Unicode pass. - * NOTE: This header is included N times, not once. - */ - -/* Allow multi inclusion */ -#include "UriDefsConfig.h" - - - -#undef URI_CHAR -#define URI_CHAR wchar_t - -#undef _UT -#define _UT(x) L##x - - - -#undef URI_FUNC -#define URI_FUNC(x) uri##x##W - -#undef URI_TYPE -#define URI_TYPE(x) Uri##x##W - - - -#undef URI_STRLEN -#define URI_STRLEN wcslen -#undef URI_STRCPY -#define URI_STRCPY wcscpy -#undef URI_STRCMP -#define URI_STRCMP wcscmp -#undef URI_STRNCMP -#define URI_STRNCMP wcsncmp - -/* TODO Remove on next source-compatibility break */ -#undef URI_SNPRINTF -#if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32)) -# define URI_SNPRINTF _snwprintf -#else -# define URI_SNPRINTF swprintf -#endif diff --git a/plugins/uriparser/UriEscape.c b/plugins/uriparser/UriEscape.c deleted file mode 100644 index 17f8bad..0000000 --- a/plugins/uriparser/UriEscape.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriEscape.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriEscape.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out, - UriBool spaceToPlus, UriBool normalizeBreaks) { - return URI_FUNC(EscapeEx)(in, NULL, out, spaceToPlus, normalizeBreaks); -} - - - -URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst, - const URI_CHAR * inAfterLast, URI_CHAR * out, - UriBool spaceToPlus, UriBool normalizeBreaks) { - const URI_CHAR * read = inFirst; - URI_CHAR * write = out; - UriBool prevWasCr = URI_FALSE; - if ((out == NULL) || (inFirst == out)) { - return NULL; - } else if (inFirst == NULL) { - if (out != NULL) { - out[0] = _UT('\0'); - } - return out; - } - - for (;;) { - if ((inAfterLast != NULL) && (read >= inAfterLast)) { - write[0] = _UT('\0'); - return write; - } - - switch (read[0]) { - case _UT('\0'): - write[0] = _UT('\0'); - return write; - - case _UT(' '): - if (spaceToPlus) { - write[0] = _UT('+'); - write++; - } else { - write[0] = _UT('%'); - write[1] = _UT('2'); - write[2] = _UT('0'); - write += 3; - } - prevWasCr = URI_FALSE; - break; - - case _UT('a'): /* ALPHA */ - case _UT('A'): - case _UT('b'): - case _UT('B'): - case _UT('c'): - case _UT('C'): - case _UT('d'): - case _UT('D'): - case _UT('e'): - case _UT('E'): - case _UT('f'): - case _UT('F'): - case _UT('g'): - case _UT('G'): - case _UT('h'): - case _UT('H'): - case _UT('i'): - case _UT('I'): - case _UT('j'): - case _UT('J'): - case _UT('k'): - case _UT('K'): - case _UT('l'): - case _UT('L'): - case _UT('m'): - case _UT('M'): - case _UT('n'): - case _UT('N'): - case _UT('o'): - case _UT('O'): - case _UT('p'): - case _UT('P'): - case _UT('q'): - case _UT('Q'): - case _UT('r'): - case _UT('R'): - case _UT('s'): - case _UT('S'): - case _UT('t'): - case _UT('T'): - case _UT('u'): - case _UT('U'): - case _UT('v'): - case _UT('V'): - case _UT('w'): - case _UT('W'): - case _UT('x'): - case _UT('X'): - case _UT('y'): - case _UT('Y'): - case _UT('z'): - case _UT('Z'): - case _UT('0'): /* DIGIT */ - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - case _UT('-'): /* "-" / "." / "_" / "~" */ - case _UT('.'): - case _UT('_'): - case _UT('~'): - /* Copy unmodified */ - write[0] = read[0]; - write++; - - prevWasCr = URI_FALSE; - break; - - case _UT('\x0a'): - if (normalizeBreaks) { - if (!prevWasCr) { - write[0] = _UT('%'); - write[1] = _UT('0'); - write[2] = _UT('D'); - write[3] = _UT('%'); - write[4] = _UT('0'); - write[5] = _UT('A'); - write += 6; - } - } else { - write[0] = _UT('%'); - write[1] = _UT('0'); - write[2] = _UT('A'); - write += 3; - } - prevWasCr = URI_FALSE; - break; - - case _UT('\x0d'): - if (normalizeBreaks) { - write[0] = _UT('%'); - write[1] = _UT('0'); - write[2] = _UT('D'); - write[3] = _UT('%'); - write[4] = _UT('0'); - write[5] = _UT('A'); - write += 6; - } else { - write[0] = _UT('%'); - write[1] = _UT('0'); - write[2] = _UT('D'); - write += 3; - } - prevWasCr = URI_TRUE; - break; - - default: - /* Percent encode */ - { - const unsigned char code = (unsigned char)read[0]; - write[0] = _UT('%'); - write[1] = URI_FUNC(HexToLetter)(code >> 4); - write[2] = URI_FUNC(HexToLetter)(code & 0x0f); - write += 3; - } - prevWasCr = URI_FALSE; - break; - } - - read++; - } -} - - - -const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout) { - return URI_FUNC(UnescapeInPlaceEx)(inout, URI_FALSE, URI_BR_DONT_TOUCH); -} - - - -const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout, - UriBool plusToSpace, UriBreakConversion breakConversion) { - URI_CHAR * read = inout; - URI_CHAR * write = inout; - UriBool prevWasCr = URI_FALSE; - - if (inout == NULL) { - return NULL; - } - - for (;;) { - switch (read[0]) { - case _UT('\0'): - if (read > write) { - write[0] = _UT('\0'); - } - return write; - - case _UT('%'): - switch (read[1]) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - case _UT('a'): - case _UT('b'): - case _UT('c'): - case _UT('d'): - case _UT('e'): - case _UT('f'): - case _UT('A'): - case _UT('B'): - case _UT('C'): - case _UT('D'): - case _UT('E'): - case _UT('F'): - switch (read[2]) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - case _UT('a'): - case _UT('b'): - case _UT('c'): - case _UT('d'): - case _UT('e'): - case _UT('f'): - case _UT('A'): - case _UT('B'): - case _UT('C'): - case _UT('D'): - case _UT('E'): - case _UT('F'): - { - /* Percent group found */ - const unsigned char left = URI_FUNC(HexdigToInt)(read[1]); - const unsigned char right = URI_FUNC(HexdigToInt)(read[2]); - const int code = 16 * left + right; - switch (code) { - case 10: - switch (breakConversion) { - case URI_BR_TO_LF: - if (!prevWasCr) { - write[0] = (URI_CHAR)10; - write++; - } - break; - - case URI_BR_TO_CRLF: - if (!prevWasCr) { - write[0] = (URI_CHAR)13; - write[1] = (URI_CHAR)10; - write += 2; - } - break; - - case URI_BR_TO_CR: - if (!prevWasCr) { - write[0] = (URI_CHAR)13; - write++; - } - break; - - case URI_BR_DONT_TOUCH: - default: - write[0] = (URI_CHAR)10; - write++; - - } - prevWasCr = URI_FALSE; - break; - - case 13: - switch (breakConversion) { - case URI_BR_TO_LF: - write[0] = (URI_CHAR)10; - write++; - break; - - case URI_BR_TO_CRLF: - write[0] = (URI_CHAR)13; - write[1] = (URI_CHAR)10; - write += 2; - break; - - case URI_BR_TO_CR: - write[0] = (URI_CHAR)13; - write++; - break; - - case URI_BR_DONT_TOUCH: - default: - write[0] = (URI_CHAR)13; - write++; - - } - prevWasCr = URI_TRUE; - break; - - default: - write[0] = (URI_CHAR)(code); - write++; - - prevWasCr = URI_FALSE; - - } - read += 3; - } - break; - - default: - /* Copy two chars unmodified and */ - /* look at this char again */ - if (read > write) { - write[0] = read[0]; - write[1] = read[1]; - } - read += 2; - write += 2; - - prevWasCr = URI_FALSE; - } - break; - - default: - /* Copy one char unmodified and */ - /* look at this char again */ - if (read > write) { - write[0] = read[0]; - } - read++; - write++; - - prevWasCr = URI_FALSE; - } - break; - - case _UT('+'): - if (plusToSpace) { - /* Convert '+' to ' ' */ - write[0] = _UT(' '); - } else { - /* Copy one char unmodified */ - if (read > write) { - write[0] = read[0]; - } - } - read++; - write++; - - prevWasCr = URI_FALSE; - break; - - default: - /* Copy one char unmodified */ - if (read > write) { - write[0] = read[0]; - } - read++; - write++; - - prevWasCr = URI_FALSE; - } - } -} - - - -#endif diff --git a/plugins/uriparser/UriFile.c b/plugins/uriparser/UriFile.c deleted file mode 100644 index 332f6a9..0000000 --- a/plugins/uriparser/UriFile.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriFile.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriFile.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -#endif - - - -static URI_INLINE int URI_FUNC(FilenameToUriString)(const URI_CHAR * filename, - URI_CHAR * uriString, UriBool fromUnix) { - const URI_CHAR * input = filename; - const URI_CHAR * lastSep = input - 1; - UriBool firstSegment = URI_TRUE; - URI_CHAR * output = uriString; - UriBool absolute; - UriBool is_windows_network; - - if ((filename == NULL) || (uriString == NULL)) { - return URI_ERROR_NULL; - } - - is_windows_network = (filename[0] == _UT('\\')) && (filename[1] == _UT('\\')); - absolute = fromUnix - ? (filename[0] == _UT('/')) - : (((filename[0] != _UT('\0')) && (filename[1] == _UT(':'))) - || is_windows_network); - - if (absolute) { - const URI_CHAR * const prefix = fromUnix - ? _UT("file://") - : is_windows_network - ? _UT("file:") - : _UT("file:///"); - const int prefixLen = URI_STRLEN(prefix); - - /* Copy prefix */ - memcpy(uriString, prefix, prefixLen * sizeof(URI_CHAR)); - output += prefixLen; - } - - /* Copy and escape on the fly */ - for (;;) { - if ((input[0] == _UT('\0')) - || (fromUnix && input[0] == _UT('/')) - || (!fromUnix && input[0] == _UT('\\'))) { - /* Copy text after last seperator */ - if (lastSep + 1 < input) { - if (!fromUnix && absolute && (firstSegment == URI_TRUE)) { - /* Quick hack to not convert "C:" to "C%3A" */ - const int charsToCopy = (int)(input - (lastSep + 1)); - memcpy(output, lastSep + 1, charsToCopy * sizeof(URI_CHAR)); - output += charsToCopy; - } else { - output = URI_FUNC(EscapeEx)(lastSep + 1, input, output, - URI_FALSE, URI_FALSE); - } - } - firstSegment = URI_FALSE; - } - - if (input[0] == _UT('\0')) { - output[0] = _UT('\0'); - break; - } else if (fromUnix && (input[0] == _UT('/'))) { - /* Copy separators unmodified */ - output[0] = _UT('/'); - output++; - lastSep = input; - } else if (!fromUnix && (input[0] == _UT('\\'))) { - /* Convert backslashes to forward slashes */ - output[0] = _UT('/'); - output++; - lastSep = input; - } - input++; - } - - return URI_SUCCESS; -} - - - -static URI_INLINE int URI_FUNC(UriStringToFilename)(const URI_CHAR * uriString, - URI_CHAR * filename, UriBool toUnix) { - if ((uriString == NULL) || (filename == NULL)) { - return URI_ERROR_NULL; - } - - { - const UriBool file_two_slashes = - URI_STRNCMP(uriString, _UT("file://"), URI_STRLEN(_UT("file://"))) == 0; - const UriBool file_three_slashes = file_two_slashes - && (URI_STRNCMP(uriString, _UT("file:///"), URI_STRLEN(_UT("file:///"))) == 0); - - const size_t charsToSkip = file_two_slashes - ? file_three_slashes - ? toUnix - /* file:///bin/bash */ - ? URI_STRLEN(_UT("file://")) - /* file:///E:/Documents%20and%20Settings */ - : URI_STRLEN(_UT("file:///")) - /* file://Server01/Letter.txt */ - : URI_STRLEN(_UT("file://")) - : 0; - const size_t charsToCopy = URI_STRLEN(uriString + charsToSkip) + 1; - - const UriBool is_windows_network_with_authority = - (toUnix == URI_FALSE) - && file_two_slashes - && ! file_three_slashes; - - URI_CHAR * const unescape_target = is_windows_network_with_authority - ? (filename + 2) - : filename; - - if (is_windows_network_with_authority) { - filename[0] = '\\'; - filename[1] = '\\'; - } - - memcpy(unescape_target, uriString + charsToSkip, charsToCopy * sizeof(URI_CHAR)); - URI_FUNC(UnescapeInPlaceEx)(filename, URI_FALSE, URI_BR_DONT_TOUCH); - } - - /* Convert forward slashes to backslashes */ - if (!toUnix) { - URI_CHAR * walker = filename; - while (walker[0] != _UT('\0')) { - if (walker[0] == _UT('/')) { - walker[0] = _UT('\\'); - } - walker++; - } - } - - return URI_SUCCESS; -} - - - -int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) { - return URI_FUNC(FilenameToUriString)(filename, uriString, URI_TRUE); -} - - - -int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) { - return URI_FUNC(FilenameToUriString)(filename, uriString, URI_FALSE); -} - - - -int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, URI_CHAR * filename) { - return URI_FUNC(UriStringToFilename)(uriString, filename, URI_TRUE); -} - - - -int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, URI_CHAR * filename) { - return URI_FUNC(UriStringToFilename)(uriString, filename, URI_FALSE); -} - - - -#endif diff --git a/plugins/uriparser/UriIp4.c b/plugins/uriparser/UriIp4.c deleted file mode 100644 index ee067d3..0000000 --- a/plugins/uriparser/UriIp4.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriIp4.c - * Holds the IPv4 parser implementation. - * NOTE: This source file includes itself twice. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriIp4.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriIp4.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriIp4Base.h" -# include -#endif - - - -/* Prototypes */ -static const URI_CHAR * URI_FUNC(ParseDecOctet)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseDecOctetOne)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseDecOctetTwo)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseDecOctetThree)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseDecOctetFour)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast); - - - -/* - * [ipFourAddress]->[decOctet]<.>[decOctet]<.>[decOctet]<.>[decOctet] - */ -int URI_FUNC(ParseIpFourAddress)(unsigned char * octetOutput, - const URI_CHAR * first, const URI_CHAR * afterLast) { - const URI_CHAR * after; - UriIp4Parser parser; - - /* Essential checks */ - if ((octetOutput == NULL) || (first == NULL) - || (afterLast <= first)) { - return URI_ERROR_SYNTAX; - } - - /* Reset parser */ - parser.stackCount = 0; - - /* Octet #1 */ - after = URI_FUNC(ParseDecOctet)(&parser, first, afterLast); - if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { - return URI_ERROR_SYNTAX; - } - uriStackToOctet(&parser, octetOutput); - - /* Octet #2 */ - after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); - if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { - return URI_ERROR_SYNTAX; - } - uriStackToOctet(&parser, octetOutput + 1); - - /* Octet #3 */ - after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); - if ((after == NULL) || (after >= afterLast) || (*after != _UT('.'))) { - return URI_ERROR_SYNTAX; - } - uriStackToOctet(&parser, octetOutput + 2); - - /* Octet #4 */ - after = URI_FUNC(ParseDecOctet)(&parser, after + 1, afterLast); - if (after != afterLast) { - return URI_ERROR_SYNTAX; - } - uriStackToOctet(&parser, octetOutput + 3); - - return URI_SUCCESS; -} - - - -/* - * [decOctet]-><0> - * [decOctet]-><1>[decOctetOne] - * [decOctet]-><2>[decOctetTwo] - * [decOctet]-><3>[decOctetThree] - * [decOctet]-><4>[decOctetThree] - * [decOctet]-><5>[decOctetThree] - * [decOctet]-><6>[decOctetThree] - * [decOctet]-><7>[decOctetThree] - * [decOctet]-><8>[decOctetThree] - * [decOctet]-><9>[decOctetThree] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctet)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return NULL; - } - - switch (*first) { - case _UT('0'): - uriPushToStack(parser, 0); - return first + 1; - - case _UT('1'): - uriPushToStack(parser, 1); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetOne)(parser, first + 1, afterLast); - - case _UT('2'): - uriPushToStack(parser, 2); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetTwo)(parser, first + 1, afterLast); - - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); - - default: - return NULL; - } -} - - - -/* - * [decOctetOne]-> - * [decOctetOne]->[DIGIT][decOctetThree] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetOne)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); - - default: - return first; - } -} - - - -/* - * [decOctetTwo]-> - * [decOctetTwo]-><0>[decOctetThree] - * [decOctetTwo]-><1>[decOctetThree] - * [decOctetTwo]-><2>[decOctetThree] - * [decOctetTwo]-><3>[decOctetThree] - * [decOctetTwo]-><4>[decOctetThree] - * [decOctetTwo]-><5>[decOctetFour] - * [decOctetTwo]-><6> - * [decOctetTwo]-><7> - * [decOctetTwo]-><8> - * [decOctetTwo]-><9> -*/ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetTwo)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetThree)(parser, first + 1, afterLast); - - case _UT('5'): - uriPushToStack(parser, 5); - return (const URI_CHAR *)URI_FUNC(ParseDecOctetFour)(parser, first + 1, afterLast); - - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return first + 1; - - default: - return first; - } -} - - - -/* - * [decOctetThree]-> - * [decOctetThree]->[DIGIT] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetThree)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - case _UT('6'): - case _UT('7'): - case _UT('8'): - case _UT('9'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return first + 1; - - default: - return first; - } -} - - - -/* - * [decOctetFour]-> - * [decOctetFour]-><0> - * [decOctetFour]-><1> - * [decOctetFour]-><2> - * [decOctetFour]-><3> - * [decOctetFour]-><4> - * [decOctetFour]-><5> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseDecOctetFour)(UriIp4Parser * parser, - const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('0'): - case _UT('1'): - case _UT('2'): - case _UT('3'): - case _UT('4'): - case _UT('5'): - uriPushToStack(parser, (unsigned char)(9 + *first - _UT('9'))); - return first + 1; - - default: - return first; - } -} - - - -#endif diff --git a/plugins/uriparser/UriIp4.h b/plugins/uriparser/UriIp4.h deleted file mode 100644 index 9251c49..0000000 --- a/plugins/uriparser/UriIp4.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriIp4.h - * Holds the IPv4 parser interface. - * NOTE: This header includes itself twice. - */ - -#if (defined(URI_PASS_ANSI) && !defined(URI_IP4_TWICE_H_ANSI)) \ - || (defined(URI_PASS_UNICODE) && !defined(URI_IP4_TWICE_H_UNICODE)) \ - || (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* What encodings are enabled? */ -#include "UriDefsConfig.h" -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriIp4.h" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriIp4.h" -# undef URI_PASS_UNICODE -# endif -/* Only one pass for each encoding */ -#elif (defined(URI_PASS_ANSI) && !defined(URI_IP4_TWICE_H_ANSI) \ - && defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \ - && !defined(URI_IP4_TWICE_H_UNICODE) && defined(URI_ENABLE_UNICODE)) -# ifdef URI_PASS_ANSI -# define URI_IP4_TWICE_H_ANSI 1 -# include "UriDefsAnsi.h" -# else -# define URI_IP4_TWICE_H_UNICODE 1 -# include "UriDefsUnicode.h" -# include -# endif - - - -/** - * Converts a IPv4 text representation into four bytes. - * - * @param octetOutput Output destination - * @param first First character of IPv4 text to parse - * @param afterLast Position to stop parsing at - * @return Error code or 0 on success - */ -int URI_FUNC(ParseIpFourAddress)(unsigned char * octetOutput, - const URI_CHAR * first, const URI_CHAR * afterLast); - - - -#endif -#endif diff --git a/plugins/uriparser/UriIp4Base.c b/plugins/uriparser/UriIp4Base.c deleted file mode 100644 index f066246..0000000 --- a/plugins/uriparser/UriIp4Base.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriIp4Base.c - * Holds code independent of the encoding pass. - */ - -#ifndef URI_DOXYGEN -# include "UriIp4Base.h" -#endif - - - -void uriStackToOctet(UriIp4Parser * parser, unsigned char * octet) { - switch (parser->stackCount) { - case 1: - *octet = parser->stackOne; - break; - - case 2: - *octet = parser->stackOne * 10 - + parser->stackTwo; - break; - - case 3: - *octet = parser->stackOne * 100 - + parser->stackTwo * 10 - + parser->stackThree; - break; - - default: - ; - } - parser->stackCount = 0; -} - - - -void uriPushToStack(UriIp4Parser * parser, unsigned char digit) { - switch (parser->stackCount) { - case 0: - parser->stackOne = digit; - parser->stackCount = 1; - break; - - case 1: - parser->stackTwo = digit; - parser->stackCount = 2; - break; - - case 2: - parser->stackThree = digit; - parser->stackCount = 3; - break; - - default: - ; - } -} diff --git a/plugins/uriparser/UriIp4Base.h b/plugins/uriparser/UriIp4Base.h deleted file mode 100644 index 23b838e..0000000 --- a/plugins/uriparser/UriIp4Base.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef URI_IP4_BASE_H -#define URI_IP4_BASE_H 1 - - - -typedef struct UriIp4ParserStruct { - unsigned char stackCount; - unsigned char stackOne; - unsigned char stackTwo; - unsigned char stackThree; -} UriIp4Parser; - - - -void uriPushToStack(UriIp4Parser * parser, unsigned char digit); -void uriStackToOctet(UriIp4Parser * parser, unsigned char * octet); - - - -#endif /* URI_IP4_BASE_H */ diff --git a/plugins/uriparser/UriNormalize.c b/plugins/uriparser/UriNormalize.c deleted file mode 100644 index d68c371..0000000 --- a/plugins/uriparser/UriNormalize.c +++ /dev/null @@ -1,728 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriNormalize.c - * Holds the RFC 3986 %URI normalization implementation. - * NOTE: This source file includes itself twice. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriNormalize.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriNormalize.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriNormalizeBase.h" -# include "UriCommon.h" -#endif - - - -static int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, - unsigned int * outMask); - -static UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask, - unsigned int maskTest, URI_TYPE(TextRange) * range); -static UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri, - unsigned int * doneMask); - -static void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first, - const URI_CHAR ** afterLast); -static UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first, - const URI_CHAR ** afterLast); -static void URI_FUNC(FixPercentEncodingEngine)( - const URI_CHAR * inFirst, const URI_CHAR * inAfterLast, - const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast); - -static UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first, - const URI_CHAR * afterLast); -static UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first, - const URI_CHAR * afterLast); - -static void URI_FUNC(LowercaseInplace)(const URI_CHAR * first, - const URI_CHAR * afterLast); -static UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first, - const URI_CHAR ** afterLast); - -static void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri, - unsigned int revertMask); - - - -static URI_INLINE void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri, - unsigned int revertMask) { - if (revertMask & URI_NORMALIZE_SCHEME) { - free((URI_CHAR *)uri->scheme.first); - uri->scheme.first = NULL; - uri->scheme.afterLast = NULL; - } - - if (revertMask & URI_NORMALIZE_USER_INFO) { - free((URI_CHAR *)uri->userInfo.first); - uri->userInfo.first = NULL; - uri->userInfo.afterLast = NULL; - } - - if (revertMask & URI_NORMALIZE_HOST) { - if (uri->hostData.ipFuture.first != NULL) { - /* IPvFuture */ - free((URI_CHAR *)uri->hostData.ipFuture.first); - uri->hostData.ipFuture.first = NULL; - uri->hostData.ipFuture.afterLast = NULL; - uri->hostText.first = NULL; - uri->hostText.afterLast = NULL; - } else if ((uri->hostText.first != NULL) - && (uri->hostData.ip4 == NULL) - && (uri->hostData.ip6 == NULL)) { - /* Regname */ - free((URI_CHAR *)uri->hostText.first); - uri->hostText.first = NULL; - uri->hostText.afterLast = NULL; - } - } - - /* NOTE: Port cannot happen! */ - - if (revertMask & URI_NORMALIZE_PATH) { - URI_TYPE(PathSegment) * walker = uri->pathHead; - while (walker != NULL) { - URI_TYPE(PathSegment) * const next = walker->next; - if (walker->text.afterLast > walker->text.first) { - free((URI_CHAR *)walker->text.first); - } - free(walker); - walker = next; - } - uri->pathHead = NULL; - uri->pathTail = NULL; - } - - if (revertMask & URI_NORMALIZE_QUERY) { - free((URI_CHAR *)uri->query.first); - uri->query.first = NULL; - uri->query.afterLast = NULL; - } - - if (revertMask & URI_NORMALIZE_FRAGMENT) { - free((URI_CHAR *)uri->fragment.first); - uri->fragment.first = NULL; - uri->fragment.afterLast = NULL; - } -} - - - -static URI_INLINE UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first, - const URI_CHAR * afterLast) { - if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { - const URI_CHAR * i = first; - for (; i < afterLast; i++) { - /* 6.2.2.1 Case Normalization: uppercase letters in scheme or host */ - if ((*i >= _UT('A')) && (*i <= _UT('Z'))) { - return URI_TRUE; - } - } - } - return URI_FALSE; -} - - - -static URI_INLINE UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first, - const URI_CHAR * afterLast) { - if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { - const URI_CHAR * i = first; - for (; i + 2 < afterLast; i++) { - if (i[0] == _UT('%')) { - /* 6.2.2.1 Case Normalization: * - * lowercase percent-encodings */ - if (((i[1] >= _UT('a')) && (i[1] <= _UT('f'))) - || ((i[2] >= _UT('a')) && (i[2] <= _UT('f')))) { - return URI_TRUE; - } else { - /* 6.2.2.2 Percent-Encoding Normalization: * - * percent-encoded unreserved characters */ - const unsigned char left = URI_FUNC(HexdigToInt)(i[1]); - const unsigned char right = URI_FUNC(HexdigToInt)(i[2]); - const int code = 16 * left + right; - if (uriIsUnreserved(code)) { - return URI_TRUE; - } - } - } - } - } - return URI_FALSE; -} - - - -static URI_INLINE void URI_FUNC(LowercaseInplace)(const URI_CHAR * first, - const URI_CHAR * afterLast) { - if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) { - URI_CHAR * i = (URI_CHAR *)first; - const int lowerUpperDiff = (_UT('a') - _UT('A')); - for (; i < afterLast; i++) { - if ((*i >= _UT('A')) && (*i <=_UT('Z'))) { - *i = (URI_CHAR)(*i + lowerUpperDiff); - } - } - } -} - - - -static URI_INLINE UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first, - const URI_CHAR ** afterLast) { - int lenInChars; - const int lowerUpperDiff = (_UT('a') - _UT('A')); - URI_CHAR * buffer; - int i = 0; - - if ((first == NULL) || (afterLast == NULL) || (*first == NULL) - || (*afterLast == NULL)) { - return URI_FALSE; - } - - lenInChars = (int)(*afterLast - *first); - if (lenInChars == 0) { - return URI_TRUE; - } else if (lenInChars < 0) { - return URI_FALSE; - } - - buffer = malloc(lenInChars * sizeof(URI_CHAR)); - if (buffer == NULL) { - return URI_FALSE; - } - - for (; i < lenInChars; i++) { - if (((*first)[i] >= _UT('A')) && ((*first)[i] <=_UT('Z'))) { - buffer[i] = (URI_CHAR)((*first)[i] + lowerUpperDiff); - } else { - buffer[i] = (*first)[i]; - } - } - - *first = buffer; - *afterLast = buffer + lenInChars; - return URI_TRUE; -} - - - -/* NOTE: Implementation must stay inplace-compatible */ -static URI_INLINE void URI_FUNC(FixPercentEncodingEngine)( - const URI_CHAR * inFirst, const URI_CHAR * inAfterLast, - const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast) { - URI_CHAR * write = (URI_CHAR *)outFirst; - const int lenInChars = (int)(inAfterLast - inFirst); - int i = 0; - - /* All but last two */ - for (; i + 2 < lenInChars; i++) { - if (inFirst[i] != _UT('%')) { - write[0] = inFirst[i]; - write++; - } else { - /* 6.2.2.2 Percent-Encoding Normalization: * - * percent-encoded unreserved characters */ - const URI_CHAR one = inFirst[i + 1]; - const URI_CHAR two = inFirst[i + 2]; - const unsigned char left = URI_FUNC(HexdigToInt)(one); - const unsigned char right = URI_FUNC(HexdigToInt)(two); - const int code = 16 * left + right; - if (uriIsUnreserved(code)) { - write[0] = (URI_CHAR)(code); - write++; - } else { - /* 6.2.2.1 Case Normalization: * - * lowercase percent-encodings */ - write[0] = _UT('%'); - write[1] = URI_FUNC(HexToLetter)(left); - write[2] = URI_FUNC(HexToLetter)(right); - write += 3; - } - - i += 2; /* For the two chars of the percent group we just ate */ - } - } - - /* Last two */ - for (; i < lenInChars; i++) { - write[0] = inFirst[i]; - write++; - } - - *outAfterLast = write; -} - - - -static URI_INLINE void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first, - const URI_CHAR ** afterLast) { - /* Death checks */ - if ((first == NULL) || (afterLast == NULL) || (*afterLast == NULL)) { - return; - } - - /* Fix inplace */ - URI_FUNC(FixPercentEncodingEngine)(first, *afterLast, first, afterLast); -} - - - -static URI_INLINE UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first, - const URI_CHAR ** afterLast) { - int lenInChars; - URI_CHAR * buffer; - - /* Death checks */ - if ((first == NULL) || (afterLast == NULL) - || (*first == NULL) || (*afterLast == NULL)) { - return URI_FALSE; - } - - /* Old text length */ - lenInChars = (int)(*afterLast - *first); - if (lenInChars == 0) { - return URI_TRUE; - } else if (lenInChars < 0) { - return URI_FALSE; - } - - /* New buffer */ - buffer = malloc(lenInChars * sizeof(URI_CHAR)); - if (buffer == NULL) { - return URI_FALSE; - } - - /* Fix on copy */ - URI_FUNC(FixPercentEncodingEngine)(*first, *afterLast, buffer, afterLast); - *first = buffer; - return URI_TRUE; -} - - - -static URI_INLINE UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask, - unsigned int maskTest, URI_TYPE(TextRange) * range) { - if (((*doneMask & maskTest) == 0) - && (range->first != NULL) - && (range->afterLast != NULL) - && (range->afterLast > range->first)) { - const int lenInChars = (int)(range->afterLast - range->first); - const int lenInBytes = lenInChars * sizeof(URI_CHAR); - URI_CHAR * dup = malloc(lenInBytes); - if (dup == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - memcpy(dup, range->first, lenInBytes); - range->first = dup; - range->afterLast = dup + lenInChars; - *doneMask |= maskTest; - } - return URI_TRUE; -} - - - -static URI_INLINE UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri, - unsigned int * doneMask) { - URI_TYPE(PathSegment) * walker = uri->pathHead; - if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_SCHEME, - &(uri->scheme)) - || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_USER_INFO, - &(uri->userInfo)) - || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_QUERY, - &(uri->query)) - || !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_FRAGMENT, - &(uri->fragment))) { - return URI_FALSE; /* Raises malloc error */ - } - - /* Host */ - if ((*doneMask & URI_NORMALIZE_HOST) == 0) { - if ((uri->hostData.ip4 == NULL) - && (uri->hostData.ip6 == NULL)) { - if (uri->hostData.ipFuture.first != NULL) { - /* IPvFuture */ - if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST, - &(uri->hostData.ipFuture))) { - return URI_FALSE; /* Raises malloc error */ - } - uri->hostText.first = uri->hostData.ipFuture.first; - uri->hostText.afterLast = uri->hostData.ipFuture.afterLast; - } else if (uri->hostText.first != NULL) { - /* Regname */ - if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST, - &(uri->hostText))) { - return URI_FALSE; /* Raises malloc error */ - } - } - } - } - - /* Path */ - if ((*doneMask & URI_NORMALIZE_PATH) == 0) { - while (walker != NULL) { - if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(walker->text))) { - /* Free allocations done so far and kill path */ - - /* Kill path to one before walker (if any) */ - URI_TYPE(PathSegment) * ranger = uri->pathHead; - while (ranger != walker) { - URI_TYPE(PathSegment) * const next = ranger->next; - if ((ranger->text.first != NULL) - && (ranger->text.afterLast != NULL) - && (ranger->text.afterLast > ranger->text.first)) { - free((URI_CHAR *)ranger->text.first); - } - free(ranger); - ranger = next; - } - - /* Kill path from walker */ - while (walker != NULL) { - URI_TYPE(PathSegment) * const next = walker->next; - free(walker); - walker = next; - } - - uri->pathHead = NULL; - uri->pathTail = NULL; - return URI_FALSE; /* Raises malloc error */ - } - walker = walker->next; - } - *doneMask |= URI_NORMALIZE_PATH; - } - - /* Port text, must come last so we don't have to undo that one if it fails. * - * Otherwise we would need and extra enum flag for it although the port * - * cannot go unnormalized... */ - if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(uri->portText))) { - return URI_FALSE; /* Raises malloc error */ - } - - return URI_TRUE; -} - - - -unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri) { - unsigned int res; -#if defined(__GNUC__) && ((__GNUC__ > 4) \ - || ((__GNUC__ == 4) && defined(__GNUC_MINOR__) && (__GNUC_MINOR__ >= 2))) - /* Slower code that fixes a warning, not sure if this is a smart idea */ - URI_TYPE(Uri) writeableClone; - memcpy(&writeableClone, uri, 1 * sizeof(URI_TYPE(Uri))); - URI_FUNC(NormalizeSyntaxEngine)(&writeableClone, 0, &res); -#else - URI_FUNC(NormalizeSyntaxEngine)((URI_TYPE(Uri) *)uri, 0, &res); -#endif - return res; -} - - - -int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask) { - return URI_FUNC(NormalizeSyntaxEngine)(uri, mask, NULL); -} - - - -int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri) { - return URI_FUNC(NormalizeSyntaxEx)(uri, (unsigned int)-1); -} - - - -static URI_INLINE int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, unsigned int * outMask) { - unsigned int doneMask = URI_NORMALIZED; - if (uri == NULL) { - if (outMask != NULL) { - *outMask = URI_NORMALIZED; - return URI_SUCCESS; - } else { - return URI_ERROR_NULL; - } - } - - if (outMask != NULL) { - /* Reset mask */ - *outMask = URI_NORMALIZED; - } else if (inMask == URI_NORMALIZED) { - /* Nothing to do */ - return URI_SUCCESS; - } - - /* Scheme, host */ - if (outMask != NULL) { - const UriBool normalizeScheme = URI_FUNC(ContainsUppercaseLetters)( - uri->scheme.first, uri->scheme.afterLast); - const UriBool normalizeHostCase = URI_FUNC(ContainsUppercaseLetters)( - uri->hostText.first, uri->hostText.afterLast); - if (normalizeScheme) { - *outMask |= URI_NORMALIZE_SCHEME; - } - - if (normalizeHostCase) { - *outMask |= URI_NORMALIZE_HOST; - } else { - const UriBool normalizeHostPrecent = URI_FUNC(ContainsUglyPercentEncoding)( - uri->hostText.first, uri->hostText.afterLast); - if (normalizeHostPrecent) { - *outMask |= URI_NORMALIZE_HOST; - } - } - } else { - /* Scheme */ - if ((inMask & URI_NORMALIZE_SCHEME) && (uri->scheme.first != NULL)) { - if (uri->owner) { - URI_FUNC(LowercaseInplace)(uri->scheme.first, uri->scheme.afterLast); - } else { - if (!URI_FUNC(LowercaseMalloc)(&(uri->scheme.first), &(uri->scheme.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_SCHEME; - } - } - - /* Host */ - if (inMask & URI_NORMALIZE_HOST) { - if (uri->hostData.ipFuture.first != NULL) { - /* IPvFuture */ - if (uri->owner) { - URI_FUNC(LowercaseInplace)(uri->hostData.ipFuture.first, - uri->hostData.ipFuture.afterLast); - } else { - if (!URI_FUNC(LowercaseMalloc)(&(uri->hostData.ipFuture.first), - &(uri->hostData.ipFuture.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_HOST; - } - uri->hostText.first = uri->hostData.ipFuture.first; - uri->hostText.afterLast = uri->hostData.ipFuture.afterLast; - } else if ((uri->hostText.first != NULL) - && (uri->hostData.ip4 == NULL) - && (uri->hostData.ip6 == NULL)) { - /* Regname */ - if (uri->owner) { - URI_FUNC(FixPercentEncodingInplace)(uri->hostText.first, - &(uri->hostText.afterLast)); - } else { - if (!URI_FUNC(FixPercentEncodingMalloc)( - &(uri->hostText.first), - &(uri->hostText.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_HOST; - } - - URI_FUNC(LowercaseInplace)(uri->hostText.first, - uri->hostText.afterLast); - } - } - } - - /* User info */ - if (outMask != NULL) { - const UriBool normalizeUserInfo = URI_FUNC(ContainsUglyPercentEncoding)( - uri->userInfo.first, uri->userInfo.afterLast); - if (normalizeUserInfo) { - *outMask |= URI_NORMALIZE_USER_INFO; - } - } else { - if ((inMask & URI_NORMALIZE_USER_INFO) && (uri->userInfo.first != NULL)) { - if (uri->owner) { - URI_FUNC(FixPercentEncodingInplace)(uri->userInfo.first, &(uri->userInfo.afterLast)); - } else { - if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->userInfo.first), - &(uri->userInfo.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_USER_INFO; - } - } - } - - /* Path */ - if (outMask != NULL) { - const URI_TYPE(PathSegment) * walker = uri->pathHead; - while (walker != NULL) { - const URI_CHAR * const first = walker->text.first; - const URI_CHAR * const afterLast = walker->text.afterLast; - if ((first != NULL) - && (afterLast != NULL) - && (afterLast > first) - && ( - (((afterLast - first) == 1) - && (first[0] == _UT('.'))) - || - (((afterLast - first) == 2) - && (first[0] == _UT('.')) - && (first[1] == _UT('.'))) - || - URI_FUNC(ContainsUglyPercentEncoding)(first, afterLast) - )) { - *outMask |= URI_NORMALIZE_PATH; - break; - } - walker = walker->next; - } - } else if (inMask & URI_NORMALIZE_PATH) { - URI_TYPE(PathSegment) * walker; - const UriBool relative = ((uri->scheme.first == NULL) - && !uri->absolutePath) ? URI_TRUE : URI_FALSE; - - /* Fix percent-encoding for each segment */ - walker = uri->pathHead; - if (uri->owner) { - while (walker != NULL) { - URI_FUNC(FixPercentEncodingInplace)(walker->text.first, &(walker->text.afterLast)); - walker = walker->next; - } - } else { - while (walker != NULL) { - if (!URI_FUNC(FixPercentEncodingMalloc)(&(walker->text.first), - &(walker->text.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - walker = walker->next; - } - doneMask |= URI_NORMALIZE_PATH; - } - - /* 6.2.2.3 Path Segment Normalization */ - if (!URI_FUNC(RemoveDotSegmentsEx)(uri, relative, - (uri->owner == URI_TRUE) - || ((doneMask & URI_NORMALIZE_PATH) != 0) - )) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - URI_FUNC(FixEmptyTrailSegment)(uri); - } - - /* Query, fragment */ - if (outMask != NULL) { - const UriBool normalizeQuery = URI_FUNC(ContainsUglyPercentEncoding)( - uri->query.first, uri->query.afterLast); - const UriBool normalizeFragment = URI_FUNC(ContainsUglyPercentEncoding)( - uri->fragment.first, uri->fragment.afterLast); - if (normalizeQuery) { - *outMask |= URI_NORMALIZE_QUERY; - } - - if (normalizeFragment) { - *outMask |= URI_NORMALIZE_FRAGMENT; - } - } else { - /* Query */ - if ((inMask & URI_NORMALIZE_QUERY) && (uri->query.first != NULL)) { - if (uri->owner) { - URI_FUNC(FixPercentEncodingInplace)(uri->query.first, &(uri->query.afterLast)); - } else { - if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->query.first), - &(uri->query.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_QUERY; - } - } - - /* Fragment */ - if ((inMask & URI_NORMALIZE_FRAGMENT) && (uri->fragment.first != NULL)) { - if (uri->owner) { - URI_FUNC(FixPercentEncodingInplace)(uri->fragment.first, &(uri->fragment.afterLast)); - } else { - if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->fragment.first), - &(uri->fragment.afterLast))) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - doneMask |= URI_NORMALIZE_FRAGMENT; - } - } - } - - /* Dup all not duped yet */ - if ((outMask == NULL) && !uri->owner) { - if (!URI_FUNC(MakeOwner)(uri, &doneMask)) { - URI_FUNC(PreventLeakage)(uri, doneMask); - return URI_ERROR_MALLOC; - } - uri->owner = URI_TRUE; - } - - return URI_SUCCESS; -} - - - -#endif diff --git a/plugins/uriparser/UriNormalizeBase.c b/plugins/uriparser/UriNormalizeBase.c deleted file mode 100644 index 8dbe7fd..0000000 --- a/plugins/uriparser/UriNormalizeBase.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef URI_DOXYGEN -# include "UriNormalizeBase.h" -#endif - - - -UriBool uriIsUnreserved(int code) { - switch (code) { - case L'a': /* ALPHA */ - case L'A': - case L'b': - case L'B': - case L'c': - case L'C': - case L'd': - case L'D': - case L'e': - case L'E': - case L'f': - case L'F': - case L'g': - case L'G': - case L'h': - case L'H': - case L'i': - case L'I': - case L'j': - case L'J': - case L'k': - case L'K': - case L'l': - case L'L': - case L'm': - case L'M': - case L'n': - case L'N': - case L'o': - case L'O': - case L'p': - case L'P': - case L'q': - case L'Q': - case L'r': - case L'R': - case L's': - case L'S': - case L't': - case L'T': - case L'u': - case L'U': - case L'v': - case L'V': - case L'w': - case L'W': - case L'x': - case L'X': - case L'y': - case L'Y': - case L'z': - case L'Z': - case L'0': /* DIGIT */ - case L'1': - case L'2': - case L'3': - case L'4': - case L'5': - case L'6': - case L'7': - case L'8': - case L'9': - case L'-': /* "-" / "." / "_" / "~" */ - case L'.': - case L'_': - case L'~': - return URI_TRUE; - - default: - return URI_FALSE; - } -} diff --git a/plugins/uriparser/UriNormalizeBase.h b/plugins/uriparser/UriNormalizeBase.h deleted file mode 100644 index 9f3abd5..0000000 --- a/plugins/uriparser/UriNormalizeBase.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef URI_NORMALIZE_BASE_H -#define URI_NORMALIZE_BASE_H 1 - - - -#include - - - -UriBool uriIsUnreserved(int code); - - - -#endif /* URI_NORMALIZE_BASE_H */ diff --git a/plugins/uriparser/UriParse.c b/plugins/uriparser/UriParse.c deleted file mode 100644 index 5eee16d..0000000 --- a/plugins/uriparser/UriParse.c +++ /dev/null @@ -1,2241 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * @file UriParse.c - * Holds the RFC 3986 %URI parsing implementation. - * NOTE: This source file includes itself twice. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriParse.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriParse.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include -# include "UriCommon.h" -# include "UriParseBase.h" -#endif - - - -#define URI_SET_DIGIT \ - _UT('0'): \ - case _UT('1'): \ - case _UT('2'): \ - case _UT('3'): \ - case _UT('4'): \ - case _UT('5'): \ - case _UT('6'): \ - case _UT('7'): \ - case _UT('8'): \ - case _UT('9') - -#define URI_SET_HEX_LETTER_UPPER \ - _UT('A'): \ - case _UT('B'): \ - case _UT('C'): \ - case _UT('D'): \ - case _UT('E'): \ - case _UT('F') - -#define URI_SET_HEX_LETTER_LOWER \ - _UT('a'): \ - case _UT('b'): \ - case _UT('c'): \ - case _UT('d'): \ - case _UT('e'): \ - case _UT('f') - -#define URI_SET_HEXDIG \ - URI_SET_DIGIT: \ - case URI_SET_HEX_LETTER_UPPER: \ - case URI_SET_HEX_LETTER_LOWER - -#define URI_SET_ALPHA \ - URI_SET_HEX_LETTER_UPPER: \ - case URI_SET_HEX_LETTER_LOWER: \ - case _UT('g'): \ - case _UT('G'): \ - case _UT('h'): \ - case _UT('H'): \ - case _UT('i'): \ - case _UT('I'): \ - case _UT('j'): \ - case _UT('J'): \ - case _UT('k'): \ - case _UT('K'): \ - case _UT('l'): \ - case _UT('L'): \ - case _UT('m'): \ - case _UT('M'): \ - case _UT('n'): \ - case _UT('N'): \ - case _UT('o'): \ - case _UT('O'): \ - case _UT('p'): \ - case _UT('P'): \ - case _UT('q'): \ - case _UT('Q'): \ - case _UT('r'): \ - case _UT('R'): \ - case _UT('s'): \ - case _UT('S'): \ - case _UT('t'): \ - case _UT('T'): \ - case _UT('u'): \ - case _UT('U'): \ - case _UT('v'): \ - case _UT('V'): \ - case _UT('w'): \ - case _UT('W'): \ - case _UT('x'): \ - case _UT('X'): \ - case _UT('y'): \ - case _UT('Y'): \ - case _UT('z'): \ - case _UT('Z') - - - -static const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); -static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); - -static UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first); -static UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first); -static UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first); -static UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first); -static void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state); - -static void URI_FUNC(ResetParserStateExceptUri)(URI_TYPE(ParserState) * state); - -static UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast); - -static void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, const URI_CHAR * errorPos); -static void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state); - - - -static URI_INLINE void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, - const URI_CHAR * errorPos) { - URI_FUNC(FreeUriMembers)(state->uri); - state->errorPos = errorPos; - state->errorCode = URI_ERROR_SYNTAX; -} - - - -static URI_INLINE void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state) { - URI_FUNC(FreeUriMembers)(state->uri); - state->errorPos = NULL; - state->errorCode = URI_ERROR_MALLOC; -} - - - -/* - * [authority]-><[>[ipLit2][authorityTwo] - * [authority]->[ownHostUserInfoNz] - * [authority]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - /* "" regname host */ - state->uri->hostText.first = URI_FUNC(SafeToPointTo); - state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo); - return afterLast; - } - - switch (*first) { - case _UT('['): - { - const URI_CHAR * const afterIpLit2 - = URI_FUNC(ParseIpLit2)(state, first + 1, afterLast); - if (afterIpLit2 == NULL) { - return NULL; - } - state->uri->hostText.first = first + 1; /* HOST BEGIN */ - return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast); - } - - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - state->uri->userInfo.first = first; /* USERINFO BEGIN */ - return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast); - - default: - /* "" regname host */ - state->uri->hostText.first = URI_FUNC(SafeToPointTo); - state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo); - return first; - } -} - - - -/* - * [authorityTwo]-><:>[port] - * [authorityTwo]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT(':'): - { - const URI_CHAR * const afterPort = URI_FUNC(ParsePort)(state, first + 1, afterLast); - if (afterPort == NULL) { - return NULL; - } - state->uri->portText.first = first + 1; /* PORT BEGIN */ - state->uri->portText.afterLast = afterPort; /* PORT END */ - return afterPort; - } - - default: - return first; - } -} - - - -/* - * [hexZero]->[HEXDIG][hexZero] - * [hexZero]-> - */ -static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case URI_SET_HEXDIG: - return URI_FUNC(ParseHexZero)(state, first + 1, afterLast); - - default: - return first; - } -} - - - -/* - * [hierPart]->[pathRootless] - * [hierPart]->[partHelperTwo] - * [hierPart]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return URI_FUNC(ParsePathRootless)(state, first, afterLast); - - case _UT('/'): - return URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast); - - default: - return first; - } -} - - - -/* - * [ipFutLoop]->[subDelims][ipFutStopGo] - * [ipFutLoop]->[unreserved][ipFutStopGo] - * [ipFutLoop]-><:>[ipFutStopGo] - */ -static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return URI_FUNC(ParseIpFutStopGo)(state, first + 1, afterLast); - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -/* - * [ipFutStopGo]->[ipFutLoop] - * [ipFutStopGo]-> - */ -static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return URI_FUNC(ParseIpFutLoop)(state, first, afterLast); - - default: - return first; - } -} - - - -/* - * [ipFuture]->[HEXDIG][hexZero]<.>[ipFutLoop] - */ -static const URI_CHAR * URI_FUNC(ParseIpFuture)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - /* - First character has already been - checked before entering this rule. - - switch (*first) { - case _UT('v'): - */ - if (first + 1 >= afterLast) { - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; - } - - switch (first[1]) { - case URI_SET_HEXDIG: - { - const URI_CHAR * afterIpFutLoop; - const URI_CHAR * const afterHexZero - = URI_FUNC(ParseHexZero)(state, first + 2, afterLast); - if (afterHexZero == NULL) { - return NULL; - } - if ((afterHexZero >= afterLast) - || (*afterHexZero != _UT('.'))) { - URI_FUNC(StopSyntax)(state, afterHexZero); - return NULL; - } - state->uri->hostText.first = first; /* HOST BEGIN */ - state->uri->hostData.ipFuture.first = first; /* IPFUTURE BEGIN */ - afterIpFutLoop = URI_FUNC(ParseIpFutLoop)(state, afterHexZero + 1, afterLast); - if (afterIpFutLoop == NULL) { - return NULL; - } - state->uri->hostText.afterLast = afterIpFutLoop; /* HOST END */ - state->uri->hostData.ipFuture.afterLast = afterIpFutLoop; /* IPFUTURE END */ - return afterIpFutLoop; - } - - default: - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; - } - - /* - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - */ -} - - - -/* - * [ipLit2]->[ipFuture]<]> - * [ipLit2]->[IPv6address2] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('v'): - { - const URI_CHAR * const afterIpFuture - = URI_FUNC(ParseIpFuture)(state, first, afterLast); - if (afterIpFuture == NULL) { - return NULL; - } - if ((afterIpFuture >= afterLast) - || (*afterIpFuture != _UT(']'))) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - return afterIpFuture + 1; - } - - case _UT(':'): - case _UT(']'): - case URI_SET_HEXDIG: - state->uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); /* Freed when stopping on parse error */ - if (state->uri->hostData.ip6 == NULL) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParseIPv6address2)(state, first, afterLast); - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -/* - * [IPv6address2]->..<]> - */ -static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - int zipperEver = 0; - int quadsDone = 0; - int digitCount = 0; - unsigned char digitHistory[4]; - int ip4OctetsDone = 0; - - unsigned char quadsAfterZipper[14]; - int quadsAfterZipperCount = 0; - - - for (;;) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - /* Inside IPv4 part? */ - if (ip4OctetsDone > 0) { - /* Eat rest of IPv4 address */ - for (;;) { - switch (*first) { - case URI_SET_DIGIT: - if (digitCount == 4) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - digitHistory[digitCount++] = (unsigned char)(9 + *first - _UT('9')); - break; - - case _UT('.'): - if ((ip4OctetsDone == 4) /* NOTE! */ - || (digitCount == 0) - || (digitCount == 4)) { - /* Invalid digit or octet count */ - URI_FUNC(StopSyntax)(state, first); - return NULL; - } else if ((digitCount > 1) - && (digitHistory[0] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount); - return NULL; - } else if ((digitCount > 2) - && (digitHistory[1] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount + 1); - return NULL; - } else if ((digitCount == 3) - && (100 * digitHistory[0] - + 10 * digitHistory[1] - + digitHistory[2] > 255)) { - /* Octet value too large */ - if (digitHistory[0] > 2) { - URI_FUNC(StopSyntax)(state, first - 3); - } else if (digitHistory[1] > 5) { - URI_FUNC(StopSyntax)(state, first - 2); - } else { - URI_FUNC(StopSyntax)(state, first - 1); - } - return NULL; - } - - /* Copy IPv4 octet */ - state->uri->hostData.ip6->data[16 - 4 + ip4OctetsDone] = uriGetOctetValue(digitHistory, digitCount); - digitCount = 0; - ip4OctetsDone++; - break; - - case _UT(']'): - if ((ip4OctetsDone != 3) /* NOTE! */ - || (digitCount == 0) - || (digitCount == 4)) { - /* Invalid digit or octet count */ - URI_FUNC(StopSyntax)(state, first); - return NULL; - } else if ((digitCount > 1) - && (digitHistory[0] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount); - return NULL; - } else if ((digitCount > 2) - && (digitHistory[1] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount + 1); - return NULL; - } else if ((digitCount == 3) - && (100 * digitHistory[0] - + 10 * digitHistory[1] - + digitHistory[2] > 255)) { - /* Octet value too large */ - if (digitHistory[0] > 2) { - URI_FUNC(StopSyntax)(state, first - 3); - } else if (digitHistory[1] > 5) { - URI_FUNC(StopSyntax)(state, first - 2); - } else { - URI_FUNC(StopSyntax)(state, first - 1); - } - return NULL; - } - - state->uri->hostText.afterLast = first; /* HOST END */ - - /* Copy missing quads right before IPv4 */ - memcpy(state->uri->hostData.ip6->data + 16 - 4 - 2 * quadsAfterZipperCount, - quadsAfterZipper, 2 * quadsAfterZipperCount); - - /* Copy last IPv4 octet */ - state->uri->hostData.ip6->data[16 - 4 + 3] = uriGetOctetValue(digitHistory, digitCount); - - return first + 1; - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - first++; - } - } else { - /* Eat while no dot in sight */ - int letterAmong = 0; - int walking = 1; - do { - switch (*first) { - case URI_SET_HEX_LETTER_LOWER: - letterAmong = 1; - if (digitCount == 4) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('f')); - digitCount++; - break; - - case URI_SET_HEX_LETTER_UPPER: - letterAmong = 1; - if (digitCount == 4) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('F')); - digitCount++; - break; - - case URI_SET_DIGIT: - if (digitCount == 4) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - digitHistory[digitCount] = (unsigned char)(9 + *first - _UT('9')); - digitCount++; - break; - - case _UT(':'): - { - int setZipper = 0; - - if (digitCount > 0) { - if (zipperEver) { - uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount); - quadsAfterZipperCount++; - } else { - uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone); - } - quadsDone++; - digitCount = 0; - } - letterAmong = 0; - - /* Too many quads? */ - if (quadsDone >= 8 - zipperEver) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - /* "::"? */ - if (first + 1 >= afterLast) { - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; - } - if (first[1] == _UT(':')) { - const int resetOffset = 2 * (quadsDone + (digitCount > 0)); - - first++; - if (zipperEver) { - URI_FUNC(StopSyntax)(state, first); - return NULL; /* "::.+::" */ - } - - /* Zero everything after zipper */ - memset(state->uri->hostData.ip6->data + resetOffset, 0, 16 - resetOffset); - setZipper = 1; - - /* ":::+"? */ - if (first + 1 >= afterLast) { - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; /* No ']' yet */ - } - if (first[1] == _UT(':')) { - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; /* ":::+ "*/ - } - } - - if (setZipper) { - zipperEver = 1; - } - } - break; - - case _UT('.'): - if ((quadsDone > 6) /* NOTE */ - || (!zipperEver && (quadsDone < 6)) - || letterAmong - || (digitCount == 0) - || (digitCount == 4)) { - /* Invalid octet before */ - URI_FUNC(StopSyntax)(state, first); - return NULL; - } else if ((digitCount > 1) - && (digitHistory[0] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount); - return NULL; - } else if ((digitCount > 2) - && (digitHistory[1] == 0)) { - /* Leading zero */ - URI_FUNC(StopSyntax)(state, first - digitCount + 1); - return NULL; - } else if ((digitCount == 3) - && (100 * digitHistory[0] - + 10 * digitHistory[1] - + digitHistory[2] > 255)) { - /* Octet value too large */ - if (digitHistory[0] > 2) { - URI_FUNC(StopSyntax)(state, first - 3); - } else if (digitHistory[1] > 5) { - URI_FUNC(StopSyntax)(state, first - 2); - } else { - URI_FUNC(StopSyntax)(state, first - 1); - } - return NULL; - } - - /* Copy first IPv4 octet */ - state->uri->hostData.ip6->data[16 - 4] = uriGetOctetValue(digitHistory, digitCount); - digitCount = 0; - - /* Switch over to IPv4 loop */ - ip4OctetsDone = 1; - walking = 0; - break; - - case _UT(']'): - /* Too little quads? */ - if (!zipperEver && !((quadsDone == 7) && (digitCount > 0))) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - if (digitCount > 0) { - if (zipperEver) { - uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount); - quadsAfterZipperCount++; - } else { - uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone); - } - /* - quadsDone++; - digitCount = 0; - */ - } - - /* Copy missing quads to the end */ - memcpy(state->uri->hostData.ip6->data + 16 - 2 * quadsAfterZipperCount, - quadsAfterZipper, 2 * quadsAfterZipperCount); - - state->uri->hostText.afterLast = first; /* HOST END */ - return first + 1; /* Fine */ - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - first++; - - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; /* No ']' yet */ - } - } while (walking); - } - } -} - - - -/* - * [mustBeSegmentNzNc]->[pctEncoded][mustBeSegmentNzNc] - * [mustBeSegmentNzNc]->[subDelims][mustBeSegmentNzNc] - * [mustBeSegmentNzNc]->[unreserved][mustBeSegmentNzNc] - * [mustBeSegmentNzNc]->[uriTail] // can take - * [mustBeSegmentNzNc]->[segment][zeroMoreSlashSegs][uriTail] - * [mustBeSegmentNzNc]-><@>[mustBeSegmentNzNc] - */ -static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - state->uri->scheme.first = NULL; /* Not a scheme, reset */ - return afterLast; - } - - switch (*first) { - case _UT('%'): - { - const URI_CHAR * const afterPctEncoded - = URI_FUNC(ParsePctEncoded)(state, first, afterLast); - if (afterPctEncoded == NULL) { - return NULL; - } - return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); - } - - case _UT('@'): - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT(','): - case _UT(';'): - case _UT('\''): - case _UT('+'): - case _UT('='): - case _UT('-'): - case _UT('.'): - case _UT('_'): - case _UT('~'): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); - - case _UT('/'): - { - const URI_CHAR * afterZeroMoreSlashSegs; - const URI_CHAR * afterSegment; - if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - state->uri->scheme.first = NULL; /* Not a scheme, reset */ - afterSegment = URI_FUNC(ParseSegment)(state, first + 1, afterLast); - if (afterSegment == NULL) { - return NULL; - } - if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - afterZeroMoreSlashSegs - = URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); - if (afterZeroMoreSlashSegs == NULL) { - return NULL; - } - return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast); - } - - default: - if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - state->uri->scheme.first = NULL; /* Not a scheme, reset */ - return URI_FUNC(ParseUriTail)(state, first, afterLast); - } -} - - - -/* - * [ownHost]-><[>[ipLit2][authorityTwo] - * [ownHost]->[ownHost2] // can take - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('['): - { - const URI_CHAR * const afterIpLit2 - = URI_FUNC(ParseIpLit2)(state, first + 1, afterLast); - if (afterIpLit2 == NULL) { - return NULL; - } - state->uri->hostText.first = first + 1; /* HOST BEGIN */ - return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast); - } - - default: - return URI_FUNC(ParseOwnHost2)(state, first, afterLast); - } -} - - - -static URI_INLINE UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { - state->uri->hostText.afterLast = first; /* HOST END */ - - /* Valid IPv4 or just a regname? */ - state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ - if (state->uri->hostData.ip4 == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, - state->uri->hostText.first, state->uri->hostText.afterLast)) { - /* Not IPv4 */ - free(state->uri->hostData.ip4); - state->uri->hostData.ip4 = NULL; - } - return URI_TRUE; /* Success */ -} - - - -/* - * [ownHost2]->[authorityTwo] // can take - * [ownHost2]->[pctSubUnres][ownHost2] - */ -static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - if (!URI_FUNC(OnExitOwnHost2)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(';'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterPctSubUnres - = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); - if (afterPctSubUnres == NULL) { - return NULL; - } - return URI_FUNC(ParseOwnHost2)(state, afterPctSubUnres, afterLast); - } - - default: - if (!URI_FUNC(OnExitOwnHost2)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParseAuthorityTwo)(state, first, afterLast); - } -} - - - -static URI_INLINE UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { - state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */ - state->uri->userInfo.first = NULL; /* Not a userInfo, reset */ - state->uri->hostText.afterLast = first; /* HOST END */ - - /* Valid IPv4 or just a regname? */ - state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ - if (state->uri->hostData.ip4 == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, - state->uri->hostText.first, state->uri->hostText.afterLast)) { - /* Not IPv4 */ - free(state->uri->hostData.ip4); - state->uri->hostData.ip4 = NULL; - } - return URI_TRUE; /* Success */ -} - - - -/* - * [ownHostUserInfo]->[ownHostUserInfoNz] - * [ownHostUserInfo]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast); - - default: - if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return first; - } -} - - - -/* - * [ownHostUserInfoNz]->[pctSubUnres][ownHostUserInfo] - * [ownHostUserInfoNz]-><:>[ownPortUserInfo] - * [ownHostUserInfoNz]-><@>[ownHost] - */ -static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(';'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterPctSubUnres - = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); - if (afterPctSubUnres == NULL) { - return NULL; - } - return URI_FUNC(ParseOwnHostUserInfo)(state, afterPctSubUnres, afterLast); - } - - case _UT(':'): - state->uri->hostText.afterLast = first; /* HOST END */ - state->uri->portText.first = first + 1; /* PORT BEGIN */ - return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast); - - case _UT('@'): - state->uri->userInfo.afterLast = first; /* USERINFO END */ - state->uri->hostText.first = first + 1; /* HOST BEGIN */ - return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -static URI_INLINE UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { - state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */ - state->uri->userInfo.first = NULL; /* Not a userInfo, reset */ - state->uri->portText.afterLast = first; /* PORT END */ - - /* Valid IPv4 or just a regname? */ - state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */ - if (state->uri->hostData.ip4 == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data, - state->uri->hostText.first, state->uri->hostText.afterLast)) { - /* Not IPv4 */ - free(state->uri->hostData.ip4); - state->uri->hostData.ip4 = NULL; - } - return URI_TRUE; /* Success */ -} - - - -/* - * [ownPortUserInfo]->[ALPHA][ownUserInfo] - * [ownPortUserInfo]->[DIGIT][ownPortUserInfo] - * [ownPortUserInfo]-><.>[ownUserInfo] - * [ownPortUserInfo]-><_>[ownUserInfo] - * [ownPortUserInfo]-><~>[ownUserInfo] - * [ownPortUserInfo]-><->[ownUserInfo] - * [ownPortUserInfo]->[subDelims][ownUserInfo] - * [ownPortUserInfo]->[pctEncoded][ownUserInfo] - * [ownPortUserInfo]-><:>[ownUserInfo] - * [ownPortUserInfo]-><@>[ownHost] - * [ownPortUserInfo]-> - */ -static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return afterLast; - } - - switch (*first) { - /* begin sub-delims */ - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('\''): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT('+'): - case _UT(','): - case _UT(';'): - case _UT('='): - /* end sub-delims */ - /* begin unreserved (except alpha and digit) */ - case _UT('-'): - case _UT('.'): - case _UT('_'): - case _UT('~'): - /* end unreserved (except alpha and digit) */ - case _UT(':'): - case URI_SET_ALPHA: - state->uri->hostText.afterLast = NULL; /* Not a host, reset */ - state->uri->portText.first = NULL; /* Not a port, reset */ - return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast); - - case URI_SET_DIGIT: - return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast); - - case _UT('%'): - state->uri->portText.first = NULL; /* Not a port, reset */ - { - const URI_CHAR * const afterPct - = URI_FUNC(ParsePctEncoded)(state, first, afterLast); - if (afterPct == NULL) { - return NULL; - } - return URI_FUNC(ParseOwnUserInfo)(state, afterPct, afterLast); - } - - case _UT('@'): - state->uri->hostText.afterLast = NULL; /* Not a host, reset */ - state->uri->portText.first = NULL; /* Not a port, reset */ - state->uri->userInfo.afterLast = first; /* USERINFO END */ - state->uri->hostText.first = first + 1; /* HOST BEGIN */ - return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); - - default: - if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return first; - } -} - - - -/* - * [ownUserInfo]->[pctSubUnres][ownUserInfo] - * [ownUserInfo]-><:>[ownUserInfo] - * [ownUserInfo]-><@>[ownHost] - */ -static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(';'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterPctSubUnres - = URI_FUNC(ParsePctSubUnres)(state, first, afterLast); - if (afterPctSubUnres == NULL) { - return NULL; - } - return URI_FUNC(ParseOwnUserInfo)(state, afterPctSubUnres, afterLast); - } - - case _UT(':'): - return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast); - - case _UT('@'): - /* SURE */ - state->uri->userInfo.afterLast = first; /* USERINFO END */ - state->uri->hostText.first = first + 1; /* HOST BEGIN */ - return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast); - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -static URI_INLINE void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state) { - state->uri->absolutePath = URI_TRUE; -} - - - -/* - * [partHelperTwo]->[pathAbsNoLeadSlash] // can take - * [partHelperTwo]->[authority][pathAbsEmpty] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(OnExitPartHelperTwo)(state); - return afterLast; - } - - switch (*first) { - case _UT('/'): - { - const URI_CHAR * const afterAuthority - = URI_FUNC(ParseAuthority)(state, first + 1, afterLast); - const URI_CHAR * afterPathAbsEmpty; - if (afterAuthority == NULL) { - return NULL; - } - afterPathAbsEmpty = URI_FUNC(ParsePathAbsEmpty)(state, afterAuthority, afterLast); - - URI_FUNC(FixEmptyTrailSegment)(state->uri); - - return afterPathAbsEmpty; - } - - default: - URI_FUNC(OnExitPartHelperTwo)(state); - return URI_FUNC(ParsePathAbsNoLeadSlash)(state, first, afterLast); - } -} - - - -/* - * [pathAbsEmpty]->[segment][pathAbsEmpty] - * [pathAbsEmpty]-> - */ -static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('/'): - { - const URI_CHAR * const afterSegment - = URI_FUNC(ParseSegment)(state, first + 1, afterLast); - if (afterSegment == NULL) { - return NULL; - } - if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParsePathAbsEmpty)(state, afterSegment, afterLast); - } - - default: - return first; - } -} - - - -/* - * [pathAbsNoLeadSlash]->[segmentNz][zeroMoreSlashSegs] - * [pathAbsNoLeadSlash]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterSegmentNz - = URI_FUNC(ParseSegmentNz)(state, first, afterLast); - if (afterSegmentNz == NULL) { - return NULL; - } - if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast); - } - - default: - return first; - } -} - - - -/* - * [pathRootless]->[segmentNz][zeroMoreSlashSegs] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - const URI_CHAR * const afterSegmentNz - = URI_FUNC(ParseSegmentNz)(state, first, afterLast); - if (afterSegmentNz == NULL) { - return NULL; - } else { - if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - } - return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast); -} - - - -/* - * [pchar]->[pctEncoded] - * [pchar]->[subDelims] - * [pchar]->[unreserved] - * [pchar]-><:> - * [pchar]-><@> - */ -static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('%'): - return URI_FUNC(ParsePctEncoded)(state, first, afterLast); - - case _UT(':'): - case _UT('@'): - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT(','): - case _UT(';'): - case _UT('\''): - case _UT('+'): - case _UT('='): - case _UT('-'): - case _UT('.'): - case _UT('_'): - case _UT('~'): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return first + 1; - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -/* - * [pctEncoded]-><%>[HEXDIG][HEXDIG] - */ -static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - /* - First character has already been - checked before entering this rule. - - switch (*first) { - case _UT('%'): - */ - if (first + 1 >= afterLast) { - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; - } - - switch (first[1]) { - case URI_SET_HEXDIG: - if (first + 2 >= afterLast) { - URI_FUNC(StopSyntax)(state, first + 2); - return NULL; - } - - switch (first[2]) { - case URI_SET_HEXDIG: - return first + 3; - - default: - URI_FUNC(StopSyntax)(state, first + 2); - return NULL; - } - - default: - URI_FUNC(StopSyntax)(state, first + 1); - return NULL; - } - - /* - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - */ -} - - - -/* - * [pctSubUnres]->[pctEncoded] - * [pctSubUnres]->[subDelims] - * [pctSubUnres]->[unreserved] - */ -static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - URI_FUNC(StopSyntax)(state, first); - return NULL; - } - - switch (*first) { - case _UT('%'): - return URI_FUNC(ParsePctEncoded)(state, first, afterLast); - - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT(','): - case _UT(';'): - case _UT('\''): - case _UT('+'): - case _UT('='): - case _UT('-'): - case _UT('.'): - case _UT('_'): - case _UT('~'): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - return first + 1; - - default: - URI_FUNC(StopSyntax)(state, first); - return NULL; - } -} - - - -/* - * [port]->[DIGIT][port] - * [port]-> - */ -static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case URI_SET_DIGIT: - return URI_FUNC(ParsePort)(state, first + 1, afterLast); - - default: - return first; - } -} - - - -/* - * [queryFrag]->[pchar][queryFrag] - * [queryFrag]->[queryFrag] - * [queryFrag]->[queryFrag] - * [queryFrag]-> - */ -static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterPchar - = URI_FUNC(ParsePchar)(state, first, afterLast); - if (afterPchar == NULL) { - return NULL; - } - return URI_FUNC(ParseQueryFrag)(state, afterPchar, afterLast); - } - - case _UT('/'): - case _UT('?'): - return URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); - - default: - return first; - } -} - - - -/* - * [segment]->[pchar][segment] - * [segment]-> - */ -static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('!'): - case _UT('$'): - case _UT('%'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('-'): - case _UT('*'): - case _UT(','): - case _UT('.'): - case _UT(':'): - case _UT(';'): - case _UT('@'): - case _UT('\''): - case _UT('_'): - case _UT('~'): - case _UT('+'): - case _UT('='): - case URI_SET_DIGIT: - case URI_SET_ALPHA: - { - const URI_CHAR * const afterPchar - = URI_FUNC(ParsePchar)(state, first, afterLast); - if (afterPchar == NULL) { - return NULL; - } - return URI_FUNC(ParseSegment)(state, afterPchar, afterLast); - } - - default: - return first; - } -} - - - -/* - * [segmentNz]->[pchar][segment] - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - const URI_CHAR * const afterPchar - = URI_FUNC(ParsePchar)(state, first, afterLast); - if (afterPchar == NULL) { - return NULL; - } - return URI_FUNC(ParseSegment)(state, afterPchar, afterLast); -} - - - -static URI_INLINE UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) { - if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ - return URI_FALSE; /* Raises malloc error*/ - } - state->uri->scheme.first = NULL; /* Not a scheme, reset */ - return URI_TRUE; /* Success */ -} - - - -/* - * [segmentNzNcOrScheme2]->[ALPHA][segmentNzNcOrScheme2] - * [segmentNzNcOrScheme2]->[DIGIT][segmentNzNcOrScheme2] - * [segmentNzNcOrScheme2]->[pctEncoded][mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]->[uriTail] // can take - * [segmentNzNcOrScheme2]->[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><$>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><&>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><(>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><)>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><*>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><,>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><.>[segmentNzNcOrScheme2] - * [segmentNzNcOrScheme2]->[segment][zeroMoreSlashSegs][uriTail] - * [segmentNzNcOrScheme2]-><:>[hierPart][uriTail] - * [segmentNzNcOrScheme2]-><;>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><@>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><_>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><~>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><+>[segmentNzNcOrScheme2] - * [segmentNzNcOrScheme2]-><=>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><'>[mustBeSegmentNzNc] - * [segmentNzNcOrScheme2]-><->[segmentNzNcOrScheme2] - */ -static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return afterLast; - } - - switch (*first) { - case _UT('.'): - case _UT('+'): - case _UT('-'): - case URI_SET_ALPHA: - case URI_SET_DIGIT: - return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast); - - case _UT('%'): - { - const URI_CHAR * const afterPctEncoded - = URI_FUNC(ParsePctEncoded)(state, first, afterLast); - if (afterPctEncoded == NULL) { - return NULL; - } - return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); - } - - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT(','): - case _UT(';'): - case _UT('@'): - case _UT('_'): - case _UT('~'): - case _UT('='): - case _UT('\''): - return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); - - case _UT('/'): - { - const URI_CHAR * afterZeroMoreSlashSegs; - const URI_CHAR * const afterSegment - = URI_FUNC(ParseSegment)(state, first + 1, afterLast); - if (afterSegment == NULL) { - return NULL; - } - if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - state->uri->scheme.first = NULL; /* Not a scheme, reset */ - if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - afterZeroMoreSlashSegs - = URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); - if (afterZeroMoreSlashSegs == NULL) { - return NULL; - } - return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast); - } - - case _UT(':'): - { - const URI_CHAR * const afterHierPart - = URI_FUNC(ParseHierPart)(state, first + 1, afterLast); - state->uri->scheme.afterLast = first; /* SCHEME END */ - if (afterHierPart == NULL) { - return NULL; - } - return URI_FUNC(ParseUriTail)(state, afterHierPart, afterLast); - } - - default: - if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) { - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParseUriTail)(state, first, afterLast); - } -} - - - -/* - * [uriReference]->[ALPHA][segmentNzNcOrScheme2] - * [uriReference]->[DIGIT][mustBeSegmentNzNc] - * [uriReference]->[pctEncoded][mustBeSegmentNzNc] - * [uriReference]->[subDelims][mustBeSegmentNzNc] - * [uriReference]->[uriTail] // can take - * [uriReference]-><.>[mustBeSegmentNzNc] - * [uriReference]->[partHelperTwo][uriTail] - * [uriReference]-><@>[mustBeSegmentNzNc] - * [uriReference]-><_>[mustBeSegmentNzNc] - * [uriReference]-><~>[mustBeSegmentNzNc] - * [uriReference]-><->[mustBeSegmentNzNc] - */ -static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case URI_SET_ALPHA: - state->uri->scheme.first = first; /* SCHEME BEGIN */ - return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast); - - case URI_SET_DIGIT: - case _UT('!'): - case _UT('$'): - case _UT('&'): - case _UT('('): - case _UT(')'): - case _UT('*'): - case _UT(','): - case _UT(';'): - case _UT('\''): - case _UT('+'): - case _UT('='): - case _UT('.'): - case _UT('_'): - case _UT('~'): - case _UT('-'): - case _UT('@'): - state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */ - return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast); - - case _UT('%'): - { - const URI_CHAR * const afterPctEncoded - = URI_FUNC(ParsePctEncoded)(state, first, afterLast); - if (afterPctEncoded == NULL) { - return NULL; - } - state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */ - return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast); - } - - case _UT('/'): - { - const URI_CHAR * const afterPartHelperTwo - = URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast); - if (afterPartHelperTwo == NULL) { - return NULL; - } - return URI_FUNC(ParseUriTail)(state, afterPartHelperTwo, afterLast); - } - - default: - return URI_FUNC(ParseUriTail)(state, first, afterLast); - } -} - - - -/* - * [uriTail]-><#>[queryFrag] - * [uriTail]->[queryFrag][uriTailTwo] - * [uriTail]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('#'): - { - const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); - if (afterQueryFrag == NULL) { - return NULL; - } - state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */ - state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */ - return afterQueryFrag; - } - - case _UT('?'): - { - const URI_CHAR * const afterQueryFrag - = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); - if (afterQueryFrag == NULL) { - return NULL; - } - state->uri->query.first = first + 1; /* QUERY BEGIN */ - state->uri->query.afterLast = afterQueryFrag; /* QUERY END */ - return URI_FUNC(ParseUriTailTwo)(state, afterQueryFrag, afterLast); - } - - default: - return first; - } -} - - - -/* - * [uriTailTwo]-><#>[queryFrag] - * [uriTailTwo]-> - */ -static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('#'): - { - const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast); - if (afterQueryFrag == NULL) { - return NULL; - } - state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */ - state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */ - return afterQueryFrag; - } - - default: - return first; - } -} - - - -/* - * [zeroMoreSlashSegs]->[segment][zeroMoreSlashSegs] - * [zeroMoreSlashSegs]-> - */ -static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - if (first >= afterLast) { - return afterLast; - } - - switch (*first) { - case _UT('/'): - { - const URI_CHAR * const afterSegment - = URI_FUNC(ParseSegment)(state, first + 1, afterLast); - if (afterSegment == NULL) { - return NULL; - } - if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */ - URI_FUNC(StopMalloc)(state); - return NULL; - } - return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast); - } - - default: - return first; - } -} - - - -static URI_INLINE void URI_FUNC(ResetParserStateExceptUri)(URI_TYPE(ParserState) * state) { - URI_TYPE(Uri) * const uriBackup = state->uri; - memset(state, 0, sizeof(URI_TYPE(ParserState))); - state->uri = uriBackup; -} - - - -static URI_INLINE UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); - if (segment == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - memset(segment, 0, sizeof(URI_TYPE(PathSegment))); - if (first == afterLast) { - segment->text.first = URI_FUNC(SafeToPointTo); - segment->text.afterLast = URI_FUNC(SafeToPointTo); - } else { - segment->text.first = first; - segment->text.afterLast = afterLast; - } - - /* First segment ever? */ - if (state->uri->pathHead == NULL) { - /* First segment ever, set head and tail */ - state->uri->pathHead = segment; - state->uri->pathTail = segment; - } else { - /* Append, update tail */ - state->uri->pathTail->next = segment; - state->uri->pathTail = segment; - } - - return URI_TRUE; /* Success */ -} - - - -int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) { - const URI_CHAR * afterUriReference; - URI_TYPE(Uri) * uri; - - /* Check params */ - if ((state == NULL) || (first == NULL) || (afterLast == NULL)) { - return URI_ERROR_NULL; - } - uri = state->uri; - - /* Init parser */ - URI_FUNC(ResetParserStateExceptUri)(state); - URI_FUNC(ResetUri)(uri); - - /* Parse */ - afterUriReference = URI_FUNC(ParseUriReference)(state, first, afterLast); - if (afterUriReference == NULL) { - return state->errorCode; - } - if (afterUriReference != afterLast) { - URI_FUNC(StopSyntax)(state, afterUriReference); - return state->errorCode; - } - return URI_SUCCESS; -} - - - -int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, const URI_CHAR * text) { - if ((state == NULL) || (text == NULL)) { - return URI_ERROR_NULL; - } - return URI_FUNC(ParseUriEx)(state, text, text + URI_STRLEN(text)); -} - - - -void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri) { - if (uri == NULL) { - return; - } - - if (uri->owner) { - /* Scheme */ - if (uri->scheme.first != NULL) { - if (uri->scheme.first != uri->scheme.afterLast) { - free((URI_CHAR *)uri->scheme.first); - } - uri->scheme.first = NULL; - uri->scheme.afterLast = NULL; - } - - /* User info */ - if (uri->userInfo.first != NULL) { - if (uri->userInfo.first != uri->userInfo.afterLast) { - free((URI_CHAR *)uri->userInfo.first); - } - uri->userInfo.first = NULL; - uri->userInfo.afterLast = NULL; - } - - /* Host data - IPvFuture */ - if (uri->hostData.ipFuture.first != NULL) { - if (uri->hostData.ipFuture.first != uri->hostData.ipFuture.afterLast) { - free((URI_CHAR *)uri->hostData.ipFuture.first); - } - uri->hostData.ipFuture.first = NULL; - uri->hostData.ipFuture.afterLast = NULL; - uri->hostText.first = NULL; - uri->hostText.afterLast = NULL; - } - - /* Host text (if regname, after IPvFuture!) */ - if ((uri->hostText.first != NULL) - && (uri->hostData.ip4 == NULL) - && (uri->hostData.ip6 == NULL)) { - /* Real regname */ - if (uri->hostText.first != uri->hostText.afterLast) { - free((URI_CHAR *)uri->hostText.first); - } - uri->hostText.first = NULL; - uri->hostText.afterLast = NULL; - } - } - - /* Host data - IPv4 */ - if (uri->hostData.ip4 != NULL) { - free(uri->hostData.ip4); - uri->hostData.ip4 = NULL; - } - - /* Host data - IPv6 */ - if (uri->hostData.ip6 != NULL) { - free(uri->hostData.ip6); - uri->hostData.ip6 = NULL; - } - - /* Port text */ - if (uri->owner && (uri->portText.first != NULL)) { - if (uri->portText.first != uri->portText.afterLast) { - free((URI_CHAR *)uri->portText.first); - } - uri->portText.first = NULL; - uri->portText.afterLast = NULL; - } - - /* Path */ - if (uri->pathHead != NULL) { - URI_TYPE(PathSegment) * segWalk = uri->pathHead; - while (segWalk != NULL) { - URI_TYPE(PathSegment) * const next = segWalk->next; - if (uri->owner && (segWalk->text.first != NULL) - && (segWalk->text.first < segWalk->text.afterLast)) { - free((URI_CHAR *)segWalk->text.first); - } - free(segWalk); - segWalk = next; - } - uri->pathHead = NULL; - uri->pathTail = NULL; - } - - if (uri->owner) { - /* Query */ - if (uri->query.first != NULL) { - if (uri->query.first != uri->query.afterLast) { - free((URI_CHAR *)uri->query.first); - } - uri->query.first = NULL; - uri->query.afterLast = NULL; - } - - /* Fragment */ - if (uri->fragment.first != NULL) { - if (uri->fragment.first != uri->fragment.afterLast) { - free((URI_CHAR *)uri->fragment.first); - } - uri->fragment.first = NULL; - uri->fragment.afterLast = NULL; - } - } -} - - - -UriBool URI_FUNC(_TESTING_ONLY_ParseIpSix)(const URI_CHAR * text) { - URI_TYPE(Uri) uri; - URI_TYPE(ParserState) parser; - const URI_CHAR * const afterIpSix = text + URI_STRLEN(text); - const URI_CHAR * res; - - URI_FUNC(ResetUri)(&uri); - parser.uri = &uri; - URI_FUNC(ResetParserStateExceptUri)(&parser); - parser.uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); - res = URI_FUNC(ParseIPv6address2)(&parser, text, afterIpSix); - URI_FUNC(FreeUriMembers)(&uri); - return res == afterIpSix ? URI_TRUE : URI_FALSE; -} - - - -UriBool URI_FUNC(_TESTING_ONLY_ParseIpFour)(const URI_CHAR * text) { - unsigned char octets[4]; - int res = URI_FUNC(ParseIpFourAddress)(octets, text, text + URI_STRLEN(text)); - return (res == URI_SUCCESS) ? URI_TRUE : URI_FALSE; -} - - - -#undef URI_SET_DIGIT -#undef URI_SET_HEX_LETTER_UPPER -#undef URI_SET_HEX_LETTER_LOWER -#undef URI_SET_HEXDIG -#undef URI_SET_ALPHA - - - -#endif diff --git a/plugins/uriparser/UriParseBase.c b/plugins/uriparser/UriParseBase.c deleted file mode 100644 index 1d4ef6e..0000000 --- a/plugins/uriparser/UriParseBase.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef URI_DOXYGEN -# include "UriParseBase.h" -#endif - - - -void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, unsigned char * output) { - switch (digitCount) { - case 1: - /* 0x___? -> \x00 \x0? */ - output[0] = 0; - output[1] = hexDigits[0]; - break; - - case 2: - /* 0x__?? -> \0xx \x?? */ - output[0] = 0; - output[1] = 16 * hexDigits[0] + hexDigits[1]; - break; - - case 3: - /* 0x_??? -> \0x? \x?? */ - output[0] = hexDigits[0]; - output[1] = 16 * hexDigits[1] + hexDigits[2]; - break; - - case 4: - /* 0x???? -> \0?? \x?? */ - output[0] = 16 * hexDigits[0] + hexDigits[1]; - output[1] = 16 * hexDigits[2] + hexDigits[3]; - break; - - } -} - - - -unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount) { - switch (digitCount) { - case 1: - return digits[0]; - - case 2: - return 10 * digits[0] + digits[1]; - - case 3: - default: - return 100 * digits[0] + 10 * digits[1] + digits[2]; - - } -} diff --git a/plugins/uriparser/UriParseBase.h b/plugins/uriparser/UriParseBase.h deleted file mode 100644 index dea5c81..0000000 --- a/plugins/uriparser/UriParseBase.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef URI_PARSE_BASE_H -#define URI_PARSE_BASE_H 1 - - - -#include - - - -void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, - unsigned char * output); -unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount); - - - -#endif /* URI_PARSE_BASE_H */ diff --git a/plugins/uriparser/UriQuery.c b/plugins/uriparser/UriQuery.c deleted file mode 100644 index f0cd4f8..0000000 --- a/plugins/uriparser/UriQuery.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriQuery.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriQuery.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -static int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, - int maxChars, int * charsWritten, int * charsRequired, - UriBool spaceToPlus, UriBool normalizeBreaks); - -static UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext, - int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter, - const URI_CHAR * valueFirst, const URI_CHAR * valueAfter, - UriBool plusToSpace, UriBreakConversion breakConversion); - - - -int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList, - int * charsRequired) { - const UriBool spaceToPlus = URI_TRUE; - const UriBool normalizeBreaks = URI_TRUE; - - return URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, charsRequired, - spaceToPlus, normalizeBreaks); -} - - - -int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList, - int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks) { - if ((queryList == NULL) || (charsRequired == NULL)) { - return URI_ERROR_NULL; - } - - return URI_FUNC(ComposeQueryEngine)(NULL, queryList, 0, NULL, - charsRequired, spaceToPlus, normalizeBreaks); -} - - - -int URI_FUNC(ComposeQuery)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten) { - const UriBool spaceToPlus = URI_TRUE; - const UriBool normalizeBreaks = URI_TRUE; - - return URI_FUNC(ComposeQueryEx)(dest, queryList, maxChars, charsWritten, - spaceToPlus, normalizeBreaks); -} - - - -int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten, - UriBool spaceToPlus, UriBool normalizeBreaks) { - if ((dest == NULL) || (queryList == NULL)) { - return URI_ERROR_NULL; - } - - if (maxChars < 1) { - return URI_ERROR_OUTPUT_TOO_LARGE; - } - - return URI_FUNC(ComposeQueryEngine)(dest, queryList, maxChars, - charsWritten, NULL, spaceToPlus, normalizeBreaks); -} - - - -int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest, - const URI_TYPE(QueryList) * queryList) { - const UriBool spaceToPlus = URI_TRUE; - const UriBool normalizeBreaks = URI_TRUE; - - return URI_FUNC(ComposeQueryMallocEx)(dest, queryList, - spaceToPlus, normalizeBreaks); -} - - - -int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest, - const URI_TYPE(QueryList) * queryList, - UriBool spaceToPlus, UriBool normalizeBreaks) { - int charsRequired; - int res; - URI_CHAR * queryString; - - if (dest == NULL) { - return URI_ERROR_NULL; - } - - /* Calculate space */ - res = URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, &charsRequired, - spaceToPlus, normalizeBreaks); - if (res != URI_SUCCESS) { - return res; - } - charsRequired++; - - /* Allocate space */ - queryString = malloc(charsRequired * sizeof(URI_CHAR)); - if (queryString == NULL) { - return URI_ERROR_MALLOC; - } - - /* Put query in */ - res = URI_FUNC(ComposeQueryEx)(queryString, queryList, charsRequired, - NULL, spaceToPlus, normalizeBreaks); - if (res != URI_SUCCESS) { - free(queryString); - return res; - } - - *dest = queryString; - return URI_SUCCESS; -} - - - -int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest, - const URI_TYPE(QueryList) * queryList, - int maxChars, int * charsWritten, int * charsRequired, - UriBool spaceToPlus, UriBool normalizeBreaks) { - UriBool firstItem = URI_TRUE; - int ampersandLen = 0; - URI_CHAR * write = dest; - - /* Subtract terminator */ - if (dest == NULL) { - *charsRequired = 0; - } else { - maxChars--; - } - - while (queryList != NULL) { - const URI_CHAR * const key = queryList->key; - const URI_CHAR * const value = queryList->value; - const int worstCase = (normalizeBreaks == URI_TRUE ? 6 : 3); - const int keyLen = (key == NULL) ? 0 : (int)URI_STRLEN(key); - const int keyRequiredChars = worstCase * keyLen; - const int valueLen = (value == NULL) ? 0 : (int)URI_STRLEN(value); - const int valueRequiredChars = worstCase * valueLen; - - if (dest == NULL) { - if (firstItem == URI_TRUE) { - ampersandLen = 1; - firstItem = URI_FALSE; - } - - (*charsRequired) += ampersandLen + keyRequiredChars + ((value == NULL) - ? 0 - : 1 + valueRequiredChars); - } else { - URI_CHAR * afterKey; - - if ((write - dest) + ampersandLen + keyRequiredChars > maxChars) { - return URI_ERROR_OUTPUT_TOO_LARGE; - } - - /* Copy key */ - if (firstItem == URI_TRUE) { - firstItem = URI_FALSE; - } else { - write[0] = _UT('&'); - write++; - } - afterKey = URI_FUNC(EscapeEx)(key, key + keyLen, - write, spaceToPlus, normalizeBreaks); - write += (afterKey - write); - - if (value != NULL) { - URI_CHAR * afterValue; - - if ((write - dest) + 1 + valueRequiredChars > maxChars) { - return URI_ERROR_OUTPUT_TOO_LARGE; - } - - /* Copy value */ - write[0] = _UT('='); - write++; - afterValue = URI_FUNC(EscapeEx)(value, value + valueLen, - write, spaceToPlus, normalizeBreaks); - write += (afterValue - write); - } - } - - queryList = queryList->next; - } - - if (dest != NULL) { - write[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = (int)(write - dest) + 1; /* .. for terminator */ - } - } - - return URI_SUCCESS; -} - - - -UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext, - int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter, - const URI_CHAR * valueFirst, const URI_CHAR * valueAfter, - UriBool plusToSpace, UriBreakConversion breakConversion) { - const int keyLen = (int)(keyAfter - keyFirst); - const int valueLen = (int)(valueAfter - valueFirst); - URI_CHAR * key; - URI_CHAR * value; - - if ((prevNext == NULL) || (itemCount == NULL) - || (keyFirst == NULL) || (keyAfter == NULL) - || (keyFirst > keyAfter) || (valueFirst > valueAfter) - || ((keyFirst == keyAfter) - && (valueFirst == NULL) && (valueAfter == NULL))) { - return URI_TRUE; - } - - /* Append new empty item */ - *prevNext = malloc(1 * sizeof(URI_TYPE(QueryList))); - if (*prevNext == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - (*prevNext)->next = NULL; - - - /* Fill key */ - key = malloc((keyLen + 1) * sizeof(URI_CHAR)); - if (key == NULL) { - free(*prevNext); - *prevNext = NULL; - return URI_FALSE; /* Raises malloc error */ - } - - key[keyLen] = _UT('\0'); - if (keyLen > 0) { - /* Copy 1:1 */ - memcpy(key, keyFirst, keyLen * sizeof(URI_CHAR)); - - /* Unescape */ - URI_FUNC(UnescapeInPlaceEx)(key, plusToSpace, breakConversion); - } - (*prevNext)->key = key; - - - /* Fill value */ - if (valueFirst != NULL) { - value = malloc((valueLen + 1) * sizeof(URI_CHAR)); - if (value == NULL) { - free(key); - free(*prevNext); - *prevNext = NULL; - return URI_FALSE; /* Raises malloc error */ - } - - value[valueLen] = _UT('\0'); - if (valueLen > 0) { - /* Copy 1:1 */ - memcpy(value, valueFirst, valueLen * sizeof(URI_CHAR)); - - /* Unescape */ - URI_FUNC(UnescapeInPlaceEx)(value, plusToSpace, breakConversion); - } - (*prevNext)->value = value; - } else { - value = NULL; - } - (*prevNext)->value = value; - - (*itemCount)++; - return URI_TRUE; -} - - - -void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList) { - while (queryList != NULL) { - URI_TYPE(QueryList) * nextBackup = queryList->next; - free((URI_CHAR *)queryList->key); /* const cast */ - free((URI_CHAR *)queryList->value); /* const cast */ - free(queryList); - queryList = nextBackup; - } -} - - - -int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount, - const URI_CHAR * first, const URI_CHAR * afterLast) { - const UriBool plusToSpace = URI_TRUE; - const UriBreakConversion breakConversion = URI_BR_DONT_TOUCH; - - return URI_FUNC(DissectQueryMallocEx)(dest, itemCount, first, afterLast, - plusToSpace, breakConversion); -} - - - -int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount, - const URI_CHAR * first, const URI_CHAR * afterLast, - UriBool plusToSpace, UriBreakConversion breakConversion) { - const URI_CHAR * walk = first; - const URI_CHAR * keyFirst = first; - const URI_CHAR * keyAfter = NULL; - const URI_CHAR * valueFirst = NULL; - const URI_CHAR * valueAfter = NULL; - URI_TYPE(QueryList) ** prevNext = dest; - int nullCounter; - int * itemsAppended = (itemCount == NULL) ? &nullCounter : itemCount; - - if ((dest == NULL) || (first == NULL) || (afterLast == NULL)) { - return URI_ERROR_NULL; - } - - if (first > afterLast) { - return URI_ERROR_RANGE_INVALID; - } - - *dest = NULL; - *itemsAppended = 0; - - /* Parse query string */ - for (; walk < afterLast; walk++) { - switch (*walk) { - case _UT('&'): - if (valueFirst != NULL) { - valueAfter = walk; - } else { - keyAfter = walk; - } - - if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended, - keyFirst, keyAfter, valueFirst, valueAfter, - plusToSpace, breakConversion) - == URI_FALSE) { - /* Free list we built */ - *itemsAppended = 0; - URI_FUNC(FreeQueryList)(*dest); - return URI_ERROR_MALLOC; - } - - /* Make future items children of the current */ - if ((prevNext != NULL) && (*prevNext != NULL)) { - prevNext = &((*prevNext)->next); - } - - if (walk + 1 < afterLast) { - keyFirst = walk + 1; - } else { - keyFirst = NULL; - } - keyAfter = NULL; - valueFirst = NULL; - valueAfter = NULL; - break; - - case _UT('='): - /* NOTE: WE treat the first '=' as a separator, */ - /* all following go into the value part */ - if (keyAfter == NULL) { - keyAfter = walk; - if (walk + 1 <= afterLast) { - valueFirst = walk + 1; - valueAfter = walk + 1; - } - } - break; - - default: - break; - } - } - - if (valueFirst != NULL) { - /* Must be key/value pair */ - valueAfter = walk; - } else { - /* Must be key only */ - keyAfter = walk; - } - - if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended, keyFirst, keyAfter, - valueFirst, valueAfter, plusToSpace, breakConversion) - == URI_FALSE) { - /* Free list we built */ - *itemsAppended = 0; - URI_FUNC(FreeQueryList)(*dest); - return URI_ERROR_MALLOC; - } - - return URI_SUCCESS; -} - - - -#endif diff --git a/plugins/uriparser/UriRecompose.c b/plugins/uriparser/UriRecompose.c deleted file mode 100644 index 9678aac..0000000 --- a/plugins/uriparser/UriRecompose.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriRecompose.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriRecompose.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -static int URI_FUNC(ToStringEngine)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, - int maxChars, int * charsWritten, int * charsRequired); - - - -int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri, - int * charsRequired) { - const int MAX_CHARS = ((unsigned int)-1) >> 1; - return URI_FUNC(ToStringEngine)(NULL, uri, MAX_CHARS, NULL, charsRequired); -} - - - -int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, - int maxChars, int * charsWritten) { - return URI_FUNC(ToStringEngine)(dest, uri, maxChars, charsWritten, NULL); -} - - - -static URI_INLINE int URI_FUNC(ToStringEngine)(URI_CHAR * dest, - const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten, - int * charsRequired) { - int written = 0; - if ((uri == NULL) || ((dest == NULL) && (charsRequired == NULL))) { - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_NULL; - } - - if (maxChars < 1) { - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - maxChars--; /* So we don't have to substract 1 for '\0' all the time */ - - /* [01/19] result = "" */ - if (dest != NULL) { - dest[0] = _UT('\0'); - } else { - (*charsRequired) = 0; - } - /* [02/19] if defined(scheme) then */ - if (uri->scheme.first != NULL) { - /* [03/19] append scheme to result; */ - const int charsToWrite - = (int)(uri->scheme.afterLast - uri->scheme.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->scheme.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite; - } - /* [04/19] append ":" to result; */ - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT(":"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - /* [05/19] endif; */ - } - /* [06/19] if defined(authority) then */ - if (URI_FUNC(IsHostSet)(uri)) { - /* [07/19] append "//" to result; */ - if (dest != NULL) { - if (written + 2 <= maxChars) { - memcpy(dest + written, _UT("//"), - 2 * sizeof(URI_CHAR)); - written += 2; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 2; - } - /* [08/19] append authority to result; */ - /* UserInfo */ - if (uri->userInfo.first != NULL) { - const int charsToWrite = (int)(uri->userInfo.afterLast - uri->userInfo.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->userInfo.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("@"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite + 1; - } - } - - /* Host */ - if (uri->hostData.ip4 != NULL) { - /* IPv4 */ - int i = 0; - for (; i < 4; i++) { - const unsigned char value = uri->hostData.ip4->data[i]; - const int charsToWrite = (value > 99) ? 3 : ((value > 9) ? 2 : 1); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - URI_CHAR text[4]; - if (value > 99) { - text[0] = _UT('0') + (value / 100); - text[1] = _UT('0') + ((value % 100) / 10); - text[2] = _UT('0') + (value % 10); - } else if (value > 9) { - text[0] = _UT('0') + (value / 10); - text[1] = _UT('0') + (value % 10); - } else { - text[0] = _UT('0') + value; - } - text[charsToWrite] = _UT('\0'); - memcpy(dest + written, text, charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - if (i < 3) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("."), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } - } else { - (*charsRequired) += charsToWrite + 1; - } - } - } else if (uri->hostData.ip6 != NULL) { - /* IPv6 */ - int i = 0; - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("["), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - - for (; i < 16; i++) { - const unsigned char value = uri->hostData.ip6->data[i]; - if (dest != NULL) { - if (written + 2 <= maxChars) { - URI_CHAR text[3]; - text[0] = URI_FUNC(HexToLetterEx)(value / 16, URI_FALSE); - text[1] = URI_FUNC(HexToLetterEx)(value % 16, URI_FALSE); - text[2] = _UT('\0'); - memcpy(dest + written, text, 2 * sizeof(URI_CHAR)); - written += 2; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 2; - } - if (((i & 1) == 1) && (i < 15)) { - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT(":"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - } - } - - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("]"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - } else if (uri->hostData.ipFuture.first != NULL) { - /* IPvFuture */ - const int charsToWrite = (int)(uri->hostData.ipFuture.afterLast - - uri->hostData.ipFuture.first); - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("["), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->hostData.ipFuture.first, charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("]"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1 + charsToWrite + 1; - } - } else if (uri->hostText.first != NULL) { - /* Regname */ - const int charsToWrite = (int)(uri->hostText.afterLast - uri->hostText.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->hostText.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite; - } - } - - /* Port */ - if (uri->portText.first != NULL) { - const int charsToWrite = (int)(uri->portText.afterLast - uri->portText.first); - if (dest != NULL) { - /* Leading ':' */ - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT(":"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - - /* Port number */ - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->portText.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1 + charsToWrite; - } - } - /* [09/19] endif; */ - } - /* [10/19] append path to result; */ - /* Slash needed here? */ - if (uri->absolutePath || ((uri->pathHead != NULL) - && URI_FUNC(IsHostSet)(uri))) { - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("/"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - } - - if (uri->pathHead != NULL) { - URI_TYPE(PathSegment) * walker = uri->pathHead; - do { - const int charsToWrite = (int)(walker->text.afterLast - walker->text.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, walker->text.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite; - } - - /* Not last segment -> append slash */ - if (walker->next != NULL) { - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("/"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - } - - walker = walker->next; - } while (walker != NULL); - } - /* [11/19] if defined(query) then */ - if (uri->query.first != NULL) { - /* [12/19] append "?" to result; */ - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("?"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - /* [13/19] append query to result; */ - { - const int charsToWrite - = (int)(uri->query.afterLast - uri->query.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->query.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite; - } - } - /* [14/19] endif; */ - } - /* [15/19] if defined(fragment) then */ - if (uri->fragment.first != NULL) { - /* [16/19] append "#" to result; */ - if (dest != NULL) { - if (written + 1 <= maxChars) { - memcpy(dest + written, _UT("#"), - 1 * sizeof(URI_CHAR)); - written += 1; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += 1; - } - /* [17/19] append fragment to result; */ - { - const int charsToWrite - = (int)(uri->fragment.afterLast - uri->fragment.first); - if (dest != NULL) { - if (written + charsToWrite <= maxChars) { - memcpy(dest + written, uri->fragment.first, - charsToWrite * sizeof(URI_CHAR)); - written += charsToWrite; - } else { - dest[0] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = 0; - } - return URI_ERROR_TOSTRING_TOO_LONG; - } - } else { - (*charsRequired) += charsToWrite; - } - } - /* [18/19] endif; */ - } - /* [19/19] return result; */ - if (dest != NULL) { - dest[written++] = _UT('\0'); - if (charsWritten != NULL) { - *charsWritten = written; - } - } - return URI_SUCCESS; -} - - - -#endif diff --git a/plugins/uriparser/UriResolve.c b/plugins/uriparser/UriResolve.c deleted file mode 100644 index bb1d21a..0000000 --- a/plugins/uriparser/UriResolve.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriResolve.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriResolve.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -/* Appends a relative URI to an absolute. The last path segment of - * the absolute URI is replaced. */ -static URI_INLINE UriBool URI_FUNC(MergePath)(URI_TYPE(Uri) * absWork, - const URI_TYPE(Uri) * relAppend) { - URI_TYPE(PathSegment) * sourceWalker; - URI_TYPE(PathSegment) * destPrev; - if (relAppend->pathHead == NULL) { - return URI_TRUE; - } - - /* Replace last segment ("" if trailing slash) with first of append chain */ - if (absWork->pathHead == NULL) { - URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment))); - if (dup == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - dup->next = NULL; - absWork->pathHead = dup; - absWork->pathTail = dup; - } - absWork->pathTail->text.first = relAppend->pathHead->text.first; - absWork->pathTail->text.afterLast = relAppend->pathHead->text.afterLast; - - /* Append all the others */ - sourceWalker = relAppend->pathHead->next; - if (sourceWalker == NULL) { - return URI_TRUE; - } - destPrev = absWork->pathTail; - - for (;;) { - URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment))); - if (dup == NULL) { - destPrev->next = NULL; - absWork->pathTail = destPrev; - return URI_FALSE; /* Raises malloc error */ - } - dup->text = sourceWalker->text; - destPrev->next = dup; - - if (sourceWalker->next == NULL) { - absWork->pathTail = dup; - absWork->pathTail->next = NULL; - break; - } - destPrev = dup; - sourceWalker = sourceWalker->next; - } - - return URI_TRUE; -} - - -static int URI_FUNC(ResolveAbsolutePathFlag)(URI_TYPE(Uri) * absWork) { - if (absWork == NULL) { - return URI_ERROR_NULL; - } - - if (URI_FUNC(IsHostSet)(absWork) && absWork->absolutePath) { - /* Empty segment needed, instead? */ - if (absWork->pathHead == NULL) { - URI_TYPE(PathSegment) * const segment = malloc(sizeof(URI_TYPE(PathSegment))); - if (segment == NULL) { - return URI_ERROR_MALLOC; - } - segment->text.first = URI_FUNC(SafeToPointTo); - segment->text.afterLast = URI_FUNC(SafeToPointTo); - segment->next = NULL; - - absWork->pathHead = segment; - absWork->pathTail = segment; - } - - absWork->absolutePath = URI_FALSE; - } - - return URI_SUCCESS; -} - - -static int URI_FUNC(AddBaseUriImpl)(URI_TYPE(Uri) * absDest, - const URI_TYPE(Uri) * relSource, - const URI_TYPE(Uri) * absBase, - UriResolutionOptions options) { - UriBool relSourceHasScheme; - - if (absDest == NULL) { - return URI_ERROR_NULL; - } - URI_FUNC(ResetUri)(absDest); - - if ((relSource == NULL) || (absBase == NULL)) { - return URI_ERROR_NULL; - } - - /* absBase absolute? */ - if (absBase->scheme.first == NULL) { - return URI_ERROR_ADDBASE_REL_BASE; - } - - /* [00/32] -- A non-strict parser may ignore a scheme in the reference */ - /* [00/32] -- if it is identical to the base URI's scheme. */ - /* [00/32] if ((not strict) and (R.scheme == Base.scheme)) then */ - relSourceHasScheme = (relSource->scheme.first != NULL) ? URI_TRUE : URI_FALSE; - if ((options & URI_RESOLVE_IDENTICAL_SCHEME_COMPAT) - && (absBase->scheme.first != NULL) - && (relSource->scheme.first != NULL) - && (0 == URI_FUNC(CompareRange)(&(absBase->scheme), &(relSource->scheme)))) { - /* [00/32] undefine(R.scheme); */ - relSourceHasScheme = URI_FALSE; - /* [00/32] endif; */ - } - - /* [01/32] if defined(R.scheme) then */ - if (relSourceHasScheme) { - /* [02/32] T.scheme = R.scheme; */ - absDest->scheme = relSource->scheme; - /* [03/32] T.authority = R.authority; */ - if (!URI_FUNC(CopyAuthority)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - /* [04/32] T.path = remove_dot_segments(R.path); */ - if (!URI_FUNC(CopyPath)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { - return URI_ERROR_MALLOC; - } - /* [05/32] T.query = R.query; */ - absDest->query = relSource->query; - /* [06/32] else */ - } else { - /* [07/32] if defined(R.authority) then */ - if (URI_FUNC(IsHostSet)(relSource)) { - /* [08/32] T.authority = R.authority; */ - if (!URI_FUNC(CopyAuthority)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - /* [09/32] T.path = remove_dot_segments(R.path); */ - if (!URI_FUNC(CopyPath)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { - return URI_ERROR_MALLOC; - } - /* [10/32] T.query = R.query; */ - absDest->query = relSource->query; - /* [11/32] else */ - } else { - /* [28/32] T.authority = Base.authority; */ - if (!URI_FUNC(CopyAuthority)(absDest, absBase)) { - return URI_ERROR_MALLOC; - } - /* [12/32] if (R.path == "") then */ - if (relSource->pathHead == NULL && !relSource->absolutePath) { - /* [13/32] T.path = Base.path; */ - if (!URI_FUNC(CopyPath)(absDest, absBase)) { - return URI_ERROR_MALLOC; - } - /* [14/32] if defined(R.query) then */ - if (relSource->query.first != NULL) { - /* [15/32] T.query = R.query; */ - absDest->query = relSource->query; - /* [16/32] else */ - } else { - /* [17/32] T.query = Base.query; */ - absDest->query = absBase->query; - /* [18/32] endif; */ - } - /* [19/32] else */ - } else { - /* [20/32] if (R.path starts-with "/") then */ - if (relSource->absolutePath) { - int res; - /* [21/32] T.path = remove_dot_segments(R.path); */ - if (!URI_FUNC(CopyPath)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - res = URI_FUNC(ResolveAbsolutePathFlag)(absDest); - if (res != URI_SUCCESS) { - return res; - } - if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { - return URI_ERROR_MALLOC; - } - /* [22/32] else */ - } else { - /* [23/32] T.path = merge(Base.path, R.path); */ - if (!URI_FUNC(CopyPath)(absDest, absBase)) { - return URI_ERROR_MALLOC; - } - if (!URI_FUNC(MergePath)(absDest, relSource)) { - return URI_ERROR_MALLOC; - } - /* [24/32] T.path = remove_dot_segments(T.path); */ - if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) { - return URI_ERROR_MALLOC; - } - - if (!URI_FUNC(FixAmbiguity)(absDest)) { - return URI_ERROR_MALLOC; - } - /* [25/32] endif; */ - } - /* [26/32] T.query = R.query; */ - absDest->query = relSource->query; - /* [27/32] endif; */ - } - URI_FUNC(FixEmptyTrailSegment)(absDest); - /* [29/32] endif; */ - } - /* [30/32] T.scheme = Base.scheme; */ - absDest->scheme = absBase->scheme; - /* [31/32] endif; */ - } - /* [32/32] T.fragment = R.fragment; */ - absDest->fragment = relSource->fragment; - - return URI_SUCCESS; - -} - - - -int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absDest, - const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase) { - const int res = URI_FUNC(AddBaseUriImpl)(absDest, relSource, absBase, URI_RESOLVE_STRICTLY); - if ((res != URI_SUCCESS) && (absDest != NULL)) { - URI_FUNC(FreeUriMembers)(absDest); - } - return res; -} - - - -int URI_FUNC(AddBaseUriEx)(URI_TYPE(Uri) * absDest, - const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase, - UriResolutionOptions options) { - const int res = URI_FUNC(AddBaseUriImpl)(absDest, relSource, absBase, options); - if ((res != URI_SUCCESS) && (absDest != NULL)) { - URI_FUNC(FreeUriMembers)(absDest); - } - return res; -} - - - -#endif diff --git a/plugins/uriparser/UriShorten.c b/plugins/uriparser/UriShorten.c deleted file mode 100644 index 0145f68..0000000 --- a/plugins/uriparser/UriShorten.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * uriparser - RFC 3986 URI parsing library - * - * Copyright (C) 2007, Weijia Song - * Copyright (C) 2007, Sebastian Pipping - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * * Neither the name of the nor the names of its - * contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* What encodings are enabled? */ -#include -#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE)) -/* Include SELF twice */ -# ifdef URI_ENABLE_ANSI -# define URI_PASS_ANSI 1 -# include "UriShorten.c" -# undef URI_PASS_ANSI -# endif -# ifdef URI_ENABLE_UNICODE -# define URI_PASS_UNICODE 1 -# include "UriShorten.c" -# undef URI_PASS_UNICODE -# endif -#else -# ifdef URI_PASS_ANSI -# include -# else -# include -# include -# endif - - - -#ifndef URI_DOXYGEN -# include -# include "UriCommon.h" -#endif - - - -static URI_INLINE UriBool URI_FUNC(AppendSegment)(URI_TYPE(Uri) * uri, - const URI_CHAR * first, const URI_CHAR * afterLast) { - /* Create segment */ - URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment))); - if (segment == NULL) { - return URI_FALSE; /* Raises malloc error */ - } - segment->next = NULL; - segment->text.first = first; - segment->text.afterLast = afterLast; - - /* Put into chain */ - if (uri->pathTail == NULL) { - uri->pathHead = segment; - } else { - uri->pathTail->next = segment; - } - uri->pathTail = segment; - - return URI_TRUE; -} - - - -static URI_INLINE UriBool URI_FUNC(EqualsAuthority)(const URI_TYPE(Uri) * first, - const URI_TYPE(Uri) * second) { - /* IPv4 */ - if (first->hostData.ip4 != NULL) { - return ((second->hostData.ip4 != NULL) - && !memcmp(first->hostData.ip4->data, - second->hostData.ip4->data, 4)) ? URI_TRUE : URI_FALSE; - } - - /* IPv6 */ - if (first->hostData.ip6 != NULL) { - return ((second->hostData.ip6 != NULL) - && !memcmp(first->hostData.ip6->data, - second->hostData.ip6->data, 16)) ? URI_TRUE : URI_FALSE; - } - - /* IPvFuture */ - if (first->hostData.ipFuture.first != NULL) { - return ((second->hostData.ipFuture.first != NULL) - && !URI_STRNCMP(first->hostData.ipFuture.first, - second->hostData.ipFuture.first, - first->hostData.ipFuture.afterLast - - first->hostData.ipFuture.first)) - ? URI_TRUE : URI_FALSE; - } - - if (first->hostText.first != NULL) { - return ((second->hostText.first != NULL) - && !URI_STRNCMP(first->hostText.first, - second->hostText.first, - first->hostText.afterLast - - first->hostText.first)) ? URI_TRUE : URI_FALSE; - } - - return (second->hostText.first == NULL); -} - - - -static int URI_FUNC(RemoveBaseUriImpl)(URI_TYPE(Uri) * dest, - const URI_TYPE(Uri) * absSource, - const URI_TYPE(Uri) * absBase, - UriBool domainRootMode) { - if (dest == NULL) { - return URI_ERROR_NULL; - } - URI_FUNC(ResetUri)(dest); - - if ((absSource == NULL) || (absBase == NULL)) { - return URI_ERROR_NULL; - } - - /* absBase absolute? */ - if (absBase->scheme.first == NULL) { - return URI_ERROR_REMOVEBASE_REL_BASE; - } - - /* absSource absolute? */ - if (absSource->scheme.first == NULL) { - return URI_ERROR_REMOVEBASE_REL_SOURCE; - } - - /* [01/50] if (A.scheme != Base.scheme) then */ - if (URI_STRNCMP(absSource->scheme.first, absBase->scheme.first, - absSource->scheme.afterLast - absSource->scheme.first)) { - /* [02/50] T.scheme = A.scheme; */ - dest->scheme = absSource->scheme; - /* [03/50] T.authority = A.authority; */ - if (!URI_FUNC(CopyAuthority)(dest, absSource)) { - return URI_ERROR_MALLOC; - } - /* [04/50] T.path = A.path; */ - if (!URI_FUNC(CopyPath)(dest, absSource)) { - return URI_ERROR_MALLOC; - } - /* [05/50] else */ - } else { - /* [06/50] undef(T.scheme); */ - /* NOOP */ - /* [07/50] if (A.authority != Base.authority) then */ - if (!URI_FUNC(EqualsAuthority)(absSource, absBase)) { - /* [08/50] T.authority = A.authority; */ - if (!URI_FUNC(CopyAuthority)(dest, absSource)) { - return URI_ERROR_MALLOC; - } - /* [09/50] T.path = A.path; */ - if (!URI_FUNC(CopyPath)(dest, absSource)) { - return URI_ERROR_MALLOC; - } - /* [10/50] else */ - } else { - /* [11/50] if domainRootMode then */ - if (domainRootMode == URI_TRUE) { - /* [12/50] undef(T.authority); */ - /* NOOP */ - /* [13/50] if (first(A.path) == "") then */ - /* GROUPED */ - /* [14/50] T.path = "/." + A.path; */ - /* GROUPED */ - /* [15/50] else */ - /* GROUPED */ - /* [16/50] T.path = A.path; */ - /* GROUPED */ - /* [17/50] endif; */ - if (!URI_FUNC(CopyPath)(dest, absSource)) { - return URI_ERROR_MALLOC; - } - dest->absolutePath = URI_TRUE; - - if (!URI_FUNC(FixAmbiguity)(dest)) { - return URI_ERROR_MALLOC; - } - /* [18/50] else */ - } else { - const URI_TYPE(PathSegment) * sourceSeg = absSource->pathHead; - const URI_TYPE(PathSegment) * baseSeg = absBase->pathHead; - /* [19/50] bool pathNaked = true; */ - UriBool pathNaked = URI_TRUE; - /* [20/50] undef(last(Base.path)); */ - /* NOOP */ - /* [21/50] T.path = ""; */ - dest->absolutePath = URI_FALSE; - /* [22/50] while (first(A.path) == first(Base.path)) do */ - while ((sourceSeg != NULL) && (baseSeg != NULL) - && !URI_STRNCMP(sourceSeg->text.first, baseSeg->text.first, - sourceSeg->text.afterLast - sourceSeg->text.first) - && !((sourceSeg->text.first == sourceSeg->text.afterLast) - && ((sourceSeg->next == NULL) != (baseSeg->next == NULL)))) { - /* [23/50] A.path++; */ - sourceSeg = sourceSeg->next; - /* [24/50] Base.path++; */ - baseSeg = baseSeg->next; - /* [25/50] endwhile; */ - } - /* [26/50] while defined(first(Base.path)) do */ - while ((baseSeg != NULL) && (baseSeg->next != NULL)) { - /* [27/50] Base.path++; */ - baseSeg = baseSeg->next; - /* [28/50] T.path += "../"; */ - if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstParent), - URI_FUNC(ConstParent) + 2)) { - return URI_ERROR_MALLOC; - } - /* [29/50] pathNaked = false; */ - pathNaked = URI_FALSE; - /* [30/50] endwhile; */ - } - /* [31/50] while defined(first(A.path)) do */ - while (sourceSeg != NULL) { - /* [32/50] if pathNaked then */ - if (pathNaked == URI_TRUE) { - /* [33/50] if (first(A.path) contains ":") then */ - UriBool containsColon = URI_FALSE; - const URI_CHAR * ch = sourceSeg->text.first; - for (; ch < sourceSeg->text.afterLast; ch++) { - if (*ch == _UT(':')) { - containsColon = URI_TRUE; - break; - } - } - - if (containsColon) { - /* [34/50] T.path += "./"; */ - if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd), - URI_FUNC(ConstPwd) + 1)) { - return URI_ERROR_MALLOC; - } - /* [35/50] elseif (first(A.path) == "") then */ - } else if (sourceSeg->text.first == sourceSeg->text.afterLast) { - /* [36/50] T.path += "/."; */ - if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd), - URI_FUNC(ConstPwd) + 1)) { - return URI_ERROR_MALLOC; - } - /* [37/50] endif; */ - } - /* [38/50] endif; */ - } - /* [39/50] T.path += first(A.path); */ - if (!URI_FUNC(AppendSegment)(dest, sourceSeg->text.first, - sourceSeg->text.afterLast)) { - return URI_ERROR_MALLOC; - } - /* [40/50] pathNaked = false; */ - pathNaked = URI_FALSE; - /* [41/50] A.path++; */ - sourceSeg = sourceSeg->next; - /* [42/50] if defined(first(A.path)) then */ - /* NOOP */ - /* [43/50] T.path += + "/"; */ - /* NOOP */ - /* [44/50] endif; */ - /* NOOP */ - /* [45/50] endwhile; */ - } - /* [46/50] endif; */ - } - /* [47/50] endif; */ - } - /* [48/50] endif; */ - } - /* [49/50] T.query = A.query; */ - dest->query = absSource->query; - /* [50/50] T.fragment = A.fragment; */ - dest->fragment = absSource->fragment; - - return URI_SUCCESS; -} - - - -int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest, - const URI_TYPE(Uri) * absSource, - const URI_TYPE(Uri) * absBase, - UriBool domainRootMode) { - const int res = URI_FUNC(RemoveBaseUriImpl)(dest, absSource, - absBase, domainRootMode); - if ((res != URI_SUCCESS) && (dest != NULL)) { - URI_FUNC(FreeUriMembers)(dest); - } - return res; -} - - - -#endif -- cgit v0.10-9-g596f From 92bab06a45c169c6118a752e70fb180707b5bd1e Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 1 Jun 2018 12:04:05 +0200 Subject: fixed typo in check_curl error message (unparsable) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 1e9561b..4141b32 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -726,7 +726,7 @@ GOT_FIRST_CERT: /* get status line of answer, check sanity of HTTP code */ if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { - snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparseable status line in %.3g seconds response time|%s\n", + snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparsable status line in %.3g seconds response time|%s\n", total_time, perfstring); die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %ld unknown - %s", code, msg); } -- cgit v0.10-9-g596f From 30bb78e6815ac920eb7b0e157655add49dbe1794 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Rameau?= Date: Fri, 1 Jun 2018 18:18:31 +0200 Subject: Avoid working with free'ed memory diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4141b32..715af43 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1920,11 +1920,11 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) /* Human readable message: "Not Found" CRLF */ - free( first_line_buf ); p = strtok( NULL, "" ); if( p == NULL ) { free( status_line->first_line ); return -1; } status_line->msg = status_line->first_line + ( p - first_line_buf ); - + free( first_line_buf ); + return 0; } -- cgit v0.10-9-g596f From df5be47f84c06d2fd481439793dc86494fdc0d7a Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 1 Jun 2018 18:35:02 +0200 Subject: check-curl: have some fallbacks ready if pkg-config is missing for uriparser tests diff --git a/m4/uriparser.m4 b/m4/uriparser.m4 index 7fb25d6..dc40473 100644 --- a/m4/uriparser.m4 +++ b/m4/uriparser.m4 @@ -73,6 +73,10 @@ AC_DEFUN([URIPARSER_CHECK], fi unset _uriparser_wanted + else + dnl no pkg-config, ok, to our best and set some defaults + URIPARSER_CPPFLAGS="-I/usr/include" + URIPARSER="-luriparser -L/usr/lib -L/usr/lib64 -L/usr/lib/x86_64-linux-gnu -L/usr/lib/i686-linux-gnu" fi if test $_uriparser_try_link = yes ; then -- cgit v0.10-9-g596f From bd7fe411d5f67b2de7d519da0575654585d1d321 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 2 Jun 2018 13:17:04 +0200 Subject: check_curl: made HTTP message optional diff --git a/REQUIREMENTS b/REQUIREMENTS index e641cea..f04a3f0 100644 --- a/REQUIREMENTS +++ b/REQUIREMENTS @@ -15,7 +15,7 @@ check_curl: - Requires libcurl 7.15.2 or later http://www.haxx.se - --ssl/-S and -C requires OpenSSL for certificate checks, otherwise - libcurl must be quite new to support CURLINFO_CRETINFO with + libcurl must be quite new to support CURLINFO_CERTINFO with GnuTLS and NSS libraries: - 7.42.0 or newer for GnuTLS - 7.34.0 or newer for NSS diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 715af43..4e65fea 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -725,6 +725,7 @@ GOT_FIRST_CERT: die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); /* get status line of answer, check sanity of HTTP code */ + strcpy( header_buf.buf, "HTTP/1.1 200\r\nServer: unkown\r\n\r\n" ); if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparsable status line in %.3g seconds response time|%s\n", total_time, perfstring); @@ -1865,7 +1866,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) char *pp; const char *start; char *first_line_buf; - + /* find last start of a new header */ start = strrstr2 (buf, "\r\nHTTP"); if (start != NULL) { @@ -1921,7 +1922,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) /* Human readable message: "Not Found" CRLF */ p = strtok( NULL, "" ); - if( p == NULL ) { free( status_line->first_line ); return -1; } + if( p == NULL ) { status_line->msg = ""; return 0; } status_line->msg = status_line->first_line + ( p - first_line_buf ); free( first_line_buf ); -- cgit v0.10-9-g596f From aa3b63215ca9d027b0492cd86fae1118c7f8fdb5 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 2 Jun 2018 13:21:06 +0200 Subject: ..I should really not test in test code :-) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4e65fea..61bfd78 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -725,7 +725,6 @@ GOT_FIRST_CERT: die (STATE_CRITICAL, _("HTTP CRITICAL - No header received from host\n")); /* get status line of answer, check sanity of HTTP code */ - strcpy( header_buf.buf, "HTTP/1.1 200\r\nServer: unkown\r\n\r\n" ); if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparsable status line in %.3g seconds response time|%s\n", total_time, perfstring); -- cgit v0.10-9-g596f From 58117296328e5a013e79e6004c109cd811298157 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 2 Jun 2018 14:47:55 +0200 Subject: check_curl: removed die in redirect with relative paths, simple cases (same protocol, same host) actually work diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 61bfd78..aa17d84 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1012,8 +1012,6 @@ redir (curlhelp_write_curlbuf* header_buf) * the original URL, so wy try to form a new absolute URL here */ if (!uri.scheme.first && !uri.hostText.first) { - /* TODO: implement */ - die (STATE_UNKNOWN, _("HTTP UNKNOWN - non-absolute location, not implemented yet!\n")); new_host = strdup (host_name ? host_name : server_address); } else { new_host = strdup (uri_string (uri.hostText, buf, DEFAULT_BUFFER_SIZE)); -- cgit v0.10-9-g596f From 577edf4725dfc3e6474042a0e0d6585b744b2b8c Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 3 Jun 2018 14:23:10 +0200 Subject: check_curl: removed some dead code diff --git a/plugins/check_curl.c b/plugins/check_curl.c index aa17d84..4fe8937 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1069,16 +1069,6 @@ redir (curlhelp_write_curlbuf* header_buf) check_http (); } -#if 0 - -int main(int argc, char *argv[]) { - - for (; i < argc; i++) { - - } - printf("\n"); -#endif - /* check whether a file exists */ void test_file (char *path) -- cgit v0.10-9-g596f From 36ea82ff1252059795c79d5a52ad9550048e7080 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 8 Jun 2018 09:23:38 +0200 Subject: check_curl: changed name of plugin in user-agent and added curl_version() to it diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4fe8937..43d5961 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -32,7 +32,7 @@ * * *****************************************************************************/ -const char *progname = "check_curl"; +const char *progname = "check_http"; const char *copyright = "2006-2018"; const char *email = "devel@monitoring-plugins.org"; @@ -247,8 +247,8 @@ main (int argc, char **argv) argv = np_extra_opts (&argc, argv, progname); /* set defaults */ - snprintf( user_agent, DEFAULT_BUFFER_SIZE, "%s/v%s (monitoring-plugins %s)", - progname, NP_VERSION, VERSION); + snprintf( user_agent, DEFAULT_BUFFER_SIZE, "%s/v%s (monitoring-plugins %s, %s)", + progname, NP_VERSION, VERSION, curl_version()); /* parse arguments */ if (process_arguments (argc, argv) == ERROR) -- cgit v0.10-9-g596f From 347e749a0a11ad35ee244fa7d60a93371ed875b9 Mon Sep 17 00:00:00 2001 From: Christopher Odenbach Date: Tue, 12 Jun 2018 09:45:07 +0200 Subject: Modified virtual host and port behaviour to match check_http. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 43d5961..4b17b25 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -133,7 +133,7 @@ char *server_url = 0; char server_ip[DEFAULT_BUFFER_SIZE]; struct curl_slist *server_ips = NULL; unsigned short server_port = HTTP_PORT; -int virtual_port = 0; +unsigned short virtual_port = 0; int host_name_length; char output_header_search[30] = ""; char output_string_search[30] = ""; @@ -256,8 +256,10 @@ main (int argc, char **argv) if (display_html == TRUE) printf ("", - use_ssl ? "https" : "http", host_name ? host_name : server_address, - server_port, server_url); + use_ssl ? "https" : "http", + host_name ? host_name : server_address, + virtual_port ? virtual_port : server_port, + server_url); result = check_http (); return result; @@ -357,14 +359,24 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); /* compose URL: must be the host_name, only if not given take the IP address. */ - snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - host_name ? host_name : server_address, server_url); + if ((use_ssl == FALSE && virtual_port == HTTP_PORT) || + (use_ssl == TRUE && virtual_port == HTTPS_PORT)) + snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", + host_name ? host_name : server_address, server_url); + else + snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", use_ssl ? "https" : "http", + host_name ? host_name : server_address, virtual_port, server_url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); - /* cURL does certificate checking with this host_name (and not the virtual host? - * So we force CURLOPT_RESOLVE to make sure the resolver pickes the right IP - * for this hostname. */ -#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) + /* cURL does certificate checking against the host name from the URL above + * So we use CURLOPT_CONNECT_TO or CURLOPT_RESOLVE to handle differing + * host names and/or ports */ +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 49, 0) + snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s:%d", host_name ? host_name : server_address, virtual_port, server_address, server_port); + server_ips = curl_slist_append (server_ips, server_ip); + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECT_TO, server_ips), "CURLOPT_CONNECT_TO"); + +#elif LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) if (host_name && strcmp (host_name, server_address)) { snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); server_ips = curl_slist_append (server_ips, server_ip); @@ -380,10 +392,6 @@ check_http (void) printf ("* curl CURLOPT_PROXY: %s:%d\n", server_address, server_port); http_method = "GET"; handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, server_url), "CURLOPT_URL"); - virtual_port = use_ssl ? HTTPS_PORT : HTTP_PORT; - } else { - /* set port */ - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PORT, server_port), "CURLOPT_PORT"); } /* set HTTP method */ @@ -396,7 +404,7 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method), "CURLOPT_CUSTOMREQUEST"); } - /* set hostname (virtual hosts) */ + /* set hostname (virtual hosts), not needed if CURLOPT_CONNECT_TO is used, but left in anyway */ if(host_name != NULL) { if((virtual_port != HTTP_PORT && !use_ssl) || (virtual_port != HTTPS_PORT && use_ssl)) { snprintf(http_header, DEFAULT_BUFFER_SIZE, "Host: %s:%d", host_name, virtual_port); @@ -1189,7 +1197,7 @@ process_arguments (int argc, char **argv) host_name_length = strlen (host_name) - strlen (p) - 1; free (host_name); host_name = strndup (optarg, host_name_length); - } + } } else if ((p = strchr (host_name, ':')) != NULL && strchr (++p, ':') == NULL) { /* IPv4:port or host:port */ virtual_port = atoi (p); @@ -1530,6 +1538,11 @@ process_arguments (int argc, char **argv) if (virtual_port == 0) virtual_port = server_port; + else { + if ((use_ssl && server_port == HTTPS_PORT) || + (!use_ssl && server_port == HTTP_PORT)) + server_port = virtual_port; + } return TRUE; } -- cgit v0.10-9-g596f From 7e9d9a56298ad27e7d68f19d46c6b60ce12a2759 Mon Sep 17 00:00:00 2001 From: Christopher Odenbach Date: Fri, 29 Jun 2018 17:15:47 +0200 Subject: added some advanced tests for check_curl diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index 28dacd0..e182623 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -20,7 +20,6 @@ use FindBin qw($Bin); $ENV{'LC_TIME'} = "C"; my $common_tests = 70; -my $virtual_port_tests = 8; my $ssl_only_tests = 8; # Check that all dependent modules are available eval "use HTTP::Daemon 6.01;"; @@ -33,11 +32,36 @@ eval { my $plugin = 'check_http'; $plugin = 'check_curl' if $0 =~ m/check_curl/mx; +# look for libcurl version to see if some advanced checks are possible (>= 7.49.0) +my $advanced_checks = 12; +my $use_advanced_checks = 0; +my $required_version = '7.49.0'; +my $virtual_host = 'www.somefunnyhost.com'; +my $virtual_port = 42; +my $curl_version = ''; +open (my $fh, '-|', "./$plugin --version") or die; +while (<$fh>) { + if (m{libcurl/([\d.]+)\s}) { + $curl_version = $1; + last; + } +} +close ($fh); +if ($curl_version) { + my ($major, $minor, $release) = split (/\./, $curl_version); + my ($req_major, $req_minor, $req_release) = split (/\./, $required_version); + my $check = ($major <=> $req_major or $minor <=> $req_minor or $release <=> $req_release); + if ($check >= 0) { + $use_advanced_checks = 1; + print "Found libcurl $major.$minor.$release. Using advanced checks\n"; + } +} + if ($@) { plan skip_all => "Missing required module for test: $@"; } else { if (-x "./$plugin") { - plan tests => $common_tests * 2 + $ssl_only_tests + $virtual_port_tests; + plan tests => $common_tests * 2 + $ssl_only_tests + $advanced_checks; } else { plan skip_all => "No $plugin compiled"; } @@ -217,36 +241,54 @@ SKIP: { } my $cmd; -# check virtual port behaviour -# -# http without virtual port -$cmd = "$command -p $port_http -u /virtual_port -r ^127.0.0.1:$port_http\$"; -$result = NPTest->testCmd( $cmd ); -is( $result->return_code, 0, $cmd); -like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); - -# http with virtual port -$cmd = "$command:80 -p $port_http -u /virtual_port -r ^127.0.0.1\$"; -$result = NPTest->testCmd( $cmd ); -is( $result->return_code, 0, $cmd); -like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); +# advanced checks with virtual hostname and virtual port +SKIP: { + skip "libcurl version is smaller than $required_version", 6 unless $use_advanced_checks; + + # http without virtual port + $cmd = "./$plugin -H $virtual_host -I 127.0.0.1 -p $port_http -u /virtual_port -r ^$virtual_host:$port_http\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # http with virtual port (!= 80) + $cmd = "./$plugin -H $virtual_host:$virtual_port -I 127.0.0.1 -p $port_http -u /virtual_port -r ^$virtual_host:$virtual_port\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # http with virtual port (80) + $cmd = "./$plugin -H $virtual_host:80 -I 127.0.0.1 -p $port_http -u /virtual_port -r ^$virtual_host\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); +} + +# and the same for SSL SKIP: { - skip "HTTP::Daemon::SSL not installed", 4 if ! exists $servers->{https}; + skip "libcurl version is smaller than $required_version and/or HTTP::Daemon::SSL not installed", 6 if ! exists $servers->{https} or not $use_advanced_checks; # https without virtual port - $cmd = "$command -p $port_https --ssl -u /virtual_port -r ^127.0.0.1:$port_https\$"; + $cmd = "./$plugin -H $virtual_host -I 127.0.0.1 -p $port_https --ssl -u /virtual_port -r ^$virtual_host:$port_https\$"; + $result = NPTest->testCmd( $cmd ); + is( $result->return_code, 0, $cmd); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); + + # https with virtual port (!= 443) + $cmd = "./$plugin -H $virtual_host:$virtual_port -I 127.0.0.1 -p $port_https --ssl -u /virtual_port -r ^$virtual_host:$virtual_port\$"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); - # https with virtual port - $cmd = "$command:443 -p $port_https --ssl -u /virtual_port -r ^127.0.0.1\$"; + # https with virtual port (443) + $cmd = "./$plugin -H $virtual_host:443 -I 127.0.0.1 -p $port_https --ssl -u /virtual_port -r ^$virtual_host\$"; $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); } + sub run_common_tests { my ($opts) = @_; my $command = $opts->{command}; -- cgit v0.10-9-g596f From 61571ce854d777cda9d00c9b7424caf400573240 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 22 Oct 2018 16:49:53 +0200 Subject: check_curl: use same page length in performance data and text output diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4b17b25..26be33c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -704,6 +704,7 @@ GOT_FIRST_CERT: * performance data to the answer always */ handle_curl_option_return_code (curl_easy_getinfo (curl, CURLINFO_TOTAL_TIME, &total_time), "CURLINFO_TOTAL_TIME"); + page_len = get_content_length(&header_buf, &body_buf); if(show_extended_perfdata) { handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME, &time_connect), "CURLINFO_CONNECT_TIME"); handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME, &time_appconnect), "CURLINFO_APPCONNECT_TIME"); @@ -713,7 +714,7 @@ GOT_FIRST_CERT: total_time, warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, - (int)body_buf.buflen, + page_len, time_connect, use_ssl == TRUE ? perfd_time_ssl(time_appconnect-time_connect) : "", (time_headers - time_appconnect), @@ -725,7 +726,7 @@ GOT_FIRST_CERT: total_time, warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, - (int)body_buf.buflen); + page_len); } /* return a CRITICAL status if we couldn't read any data */ @@ -867,7 +868,6 @@ GOT_FIRST_CERT: } /* make sure the page is of an appropriate size */ - page_len = get_content_length(&header_buf, &body_buf); if ((max_page_len > 0) && (page_len > max_page_len)) { snprintf (msg, DEFAULT_BUFFER_SIZE, _("%spage size %d too large, "), msg, page_len); result = max_state_alt(STATE_WARNING, result); @@ -1866,7 +1866,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) char *pp; const char *start; char *first_line_buf; - + /* find last start of a new header */ start = strrstr2 (buf, "\r\nHTTP"); if (start != NULL) { @@ -1925,7 +1925,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) if( p == NULL ) { status_line->msg = ""; return 0; } status_line->msg = status_line->first_line + ( p - first_line_buf ); free( first_line_buf ); - + return 0; } -- cgit v0.10-9-g596f From 0958ce4b829652e5b5c74f0496507ec7ec48014b Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 22 Oct 2018 17:53:31 +0200 Subject: check_curl: unify performance data and align them with check_http diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 26be33c..63c07e3 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -207,6 +207,13 @@ int process_arguments (int, char**); void handle_curl_option_return_code (CURLcode res, const char* option); int check_http (void); void redir (curlhelp_write_curlbuf*); +char *perfd_time (double microsec); +char *perfd_time_connect (double microsec); +char *perfd_time_ssl (double microsec); +char *perfd_time_firstbyte (double microsec); +char *perfd_time_headers (double microsec); +char *perfd_time_transfer (double microsec); +char *perfd_size (int page_len); void print_help (void); void print_usage (void); void print_curl_version (void); @@ -222,7 +229,6 @@ int net_noopenssl_check_certificate (cert_ptr_union*, int, int); int curlhelp_parse_statusline (const char*, curlhelp_statusline *); void curlhelp_free_statusline (curlhelp_statusline *); -char *perfd_time_ssl (double microsec); char *get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header); int check_document_dates (const curlhelp_write_curlbuf *, char (*msg)[DEFAULT_BUFFER_SIZE]); int get_content_length (const curlhelp_write_curlbuf* header_buf, const curlhelp_write_curlbuf* body_buf); @@ -710,23 +716,20 @@ GOT_FIRST_CERT: handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME, &time_appconnect), "CURLINFO_APPCONNECT_TIME"); handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME, &time_headers), "CURLINFO_PRETRANSFER_TIME"); handle_curl_option_return_code (curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME, &time_firstbyte), "CURLINFO_STARTTRANSFER_TIME"); - snprintf(perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;; size=%dB;;; time_connect=%.6gs;;;; %s time_headers=%.6gs;;;; time_firstbyte=%.6gs;;;; time_transfer=%.6gs;;;;", - total_time, - warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, - critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, - page_len, - time_connect, - use_ssl == TRUE ? perfd_time_ssl(time_appconnect-time_connect) : "", - (time_headers - time_appconnect), - (time_firstbyte - time_headers), - (total_time-time_firstbyte) - ); + snprintf(perfstring, DEFAULT_BUFFER_SIZE, "%s %s %s %s %s %s %s", + perfd_time(total_time), + perfd_size(page_len), + perfd_time_connect(time_connect), + use_ssl == TRUE ? perfd_time_ssl (time_appconnect-time_connect) : "", + perfd_time_headers(time_headers - time_appconnect), + perfd_time_firstbyte(time_firstbyte - time_headers), + perfd_time_transfer(total_time-time_firstbyte) + ); } else { - snprintf(perfstring, DEFAULT_BUFFER_SIZE, "time=%.6gs;%.6g;%.6g;; size=%dB;;;", - total_time, - warning_thresholds != NULL ? (double)thlds->warning->end : 0.0, - critical_thresholds != NULL ? (double)thlds->critical->end : 0.0, - page_len); + snprintf(perfstring, DEFAULT_BUFFER_SIZE, "%s %s", + perfd_time(total_time), + perfd_size(page_len) + ); } /* return a CRITICAL status if we couldn't read any data */ @@ -1547,6 +1550,47 @@ process_arguments (int argc, char **argv) return TRUE; } +char *perfd_time (double elapsed_time) +{ + return fperfdata ("time", elapsed_time, "s", + thlds->warning?TRUE:FALSE, thlds->warning?thlds->warning->end:0, + thlds->critical?TRUE:FALSE, thlds->critical?thlds->critical->end:0, + TRUE, 0, TRUE, socket_timeout); +} + +char *perfd_time_connect (double elapsed_time_connect) +{ + return fperfdata ("time_connect", elapsed_time_connect, "s", FALSE, 0, FALSE, 0, FALSE, 0, TRUE, socket_timeout); +} + +char *perfd_time_ssl (double elapsed_time_ssl) +{ + return fperfdata ("time_ssl", elapsed_time_ssl, "s", FALSE, 0, FALSE, 0, FALSE, 0, TRUE, socket_timeout); +} + +char *perfd_time_headers (double elapsed_time_headers) +{ + return fperfdata ("time_headers", elapsed_time_headers, "s", FALSE, 0, FALSE, 0, FALSE, 0, TRUE, socket_timeout); +} + +char *perfd_time_firstbyte (double elapsed_time_firstbyte) +{ + return fperfdata ("time_firstbyte", elapsed_time_firstbyte, "s", FALSE, 0, FALSE, 0, FALSE, 0, TRUE, socket_timeout); +} + +char *perfd_time_transfer (double elapsed_time_transfer) +{ + return fperfdata ("time_transfer", elapsed_time_transfer, "s", FALSE, 0, FALSE, 0, FALSE, 0, TRUE, socket_timeout); +} + +char *perfd_size (int page_len) +{ + return perfdata ("size", page_len, "B", + (min_page_len>0?TRUE:FALSE), min_page_len, + (min_page_len>0?TRUE:FALSE), 0, + TRUE, 0, FALSE, 0); +} + void print_help (void) { @@ -1946,12 +1990,6 @@ remove_newlines (char *s) } char * -perfd_time_ssl (double elapsed_time_ssl) -{ - return fperfdata ("time_ssl", elapsed_time_ssl, "s", FALSE, 0, FALSE, 0, FALSE, 0, FALSE, 0); -} - -char * get_header_value (const struct phr_header* headers, const size_t nof_headers, const char* header) { int i; -- cgit v0.10-9-g596f From ac45ad31c6b45a64bc8592c8e049bab1ff47bd1a Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 23 Oct 2018 09:35:51 +0200 Subject: check_curl: enable by default if all requirements are met diff --git a/configure.ac b/configure.ac index 9ac0995..1fccf53 100644 --- a/configure.ac +++ b/configure.ac @@ -385,16 +385,9 @@ if test "$ac_cv_header_wtsapi32_h" = "yes"; then AC_SUBST(WTSAPI32LIBS) fi -AC_ARG_ENABLE(check-curl, - AC_HELP_STRING([--enable-check-curl], - [Enables compilation of check_curl (default: no)]), - [enable_check_curl=$enableval], - [enable_check_curl=no]) -if test "$enable_check_curl" = "yes" ; then - _can_enable_check_curl=no - - dnl Check for cURL library - LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ +_can_enable_check_curl=no +dnl Check for cURL library +LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ _can_enable_check_curl=yes LIBCURLINCLUDE="$LIBCURL_CPPFLAGS" LIBCURLLIBS="$LIBCURL" @@ -406,10 +399,10 @@ if test "$enable_check_curl" = "yes" ; then _can_enable_check_curl=no AC_MSG_WARN([Skipping curl plugin]) AC_MSG_WARN([install libcurl libs to compile this plugin (see REQUIREMENTS).]) - ]) - - dnl Check for uriparser library - URIPARSER_CHECK(yes, 0.7.5, [ +]) + +dnl Check for uriparser library +URIPARSER_CHECK(yes, 0.7.5, [ _can_enable_check_curl=yes URIPARSERINCLUDE="$URIPARSER_CPPFLAGS" URIPARSERLIBS="$URIPARSER" @@ -421,18 +414,17 @@ if test "$enable_check_curl" = "yes" ; then _can_enable_check_curl=no AC_MSG_WARN([Skipping curl plugin]) AC_MSG_WARN([install the uriparser library to compile this plugin (see REQUIREMENTS).]) - ]) +]) - dnl prerequisites met, enable the plugin - if test x$_can_enable_check_curl = xyes; then - EXTRAS="$EXTRAS check_curl\$(EXEEXT)" +dnl prerequisites met, enable the plugin +if test x$_can_enable_check_curl = xyes; then +EXTRAS="$EXTRAS check_curl\$(EXEEXT)" - dnl Enable bundled picohttpparser library (for now) - AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) - fi +dnl Enable bundled picohttpparser library (for now) +AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) fi -AM_CONDITIONAL([WITH_CHECK_CURL], [test "$enable_check_curl" = "yes"]) -AM_COND_IF([WITH_CHECK_CURL], +AM_CONDITIONAL([WITH_CHECK_CURL], [test "$_can_enable_check_curl" = "yes"]) +AM_COND_IF([WITH_CHECK_CURL], [AC_CONFIG_FILES([plugins/picohttpparser/Makefile])]) dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface @@ -1932,7 +1924,5 @@ ACX_FEATURE([enable],[perl-modules]) ACX_FEATURE([with],[cgiurl]) ACX_FEATURE([with],[trusted-path]) ACX_FEATURE([enable],[libtap]) -ACX_FEATURE([enable],[check-curl]) ACX_FEATURE([with],[libcurl]) ACX_FEATURE([with],[uriparser]) - -- cgit v0.10-9-g596f From 70888d0f880362a8c8671df93d55428b144dbce1 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 23 Oct 2018 10:56:05 +0200 Subject: check_curl: do not use pkg-config if --with-uriparser was supplied by commandline if we run configure with --with-uriparser=... it should use that path or fail. diff --git a/m4/uriparser.m4 b/m4/uriparser.m4 index dc40473..c77f764 100644 --- a/m4/uriparser.m4 +++ b/m4/uriparser.m4 @@ -29,14 +29,13 @@ AC_DEFUN([URIPARSER_CHECK], _uriparser_try_link=yes + AC_CHECK_PROG(PKGCONFIG,pkg-config,pkg-config,no) + if test -d "$_uriparser_with" ; then URIPARSER_CPPFLAGS="-I$withval/include" _uriparser_ldflags="-L$withval/lib" - fi - AC_CHECK_PROG(PKGCONFIG,pkg-config,pkg-config,no) - - if test x$PKGCONFIG != xno; then + elif test x$PKGCONFIG != xno; then AC_CACHE_CHECK([for the version of uriparser], [uriparser_cv_uriparser_version], @@ -83,7 +82,7 @@ AC_DEFUN([URIPARSER_CHECK], # we didn't find curl-config, so let's see if the user-supplied # link line (or failing that, "-luriparser") is enough. - URIPARSERLIBS=${URIPARSERLIBS-"$_uriparser_ldflags -luriparser"} + URIPARSER=${URIPARSER-"$_uriparser_ldflags -luriparser"} AC_CACHE_CHECK([whether uriparser is usable], [uriparser_cv_lib_uriparser_usable], @@ -137,5 +136,3 @@ if (x == URI_SUCCESS) {;} unset _uriparser_with ])dnl - - -- cgit v0.10-9-g596f From fd588dd2fa4106475b10cac5fea966d370d8c74d Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 23 Oct 2018 11:35:14 +0200 Subject: picohttpparser: add header to final tarball diff --git a/plugins/picohttpparser/Makefile.am b/plugins/picohttpparser/Makefile.am index 5a61027..87e0531 100644 --- a/plugins/picohttpparser/Makefile.am +++ b/plugins/picohttpparser/Makefile.am @@ -1,3 +1,3 @@ noinst_LIBRARIES = libpicohttpparser.a -libpicohttpparser_a_SOURCES = picohttpparser.c +libpicohttpparser_a_SOURCES = picohttpparser.c picohttpparser.h -- cgit v0.10-9-g596f From 7501ba9f8a34413147281bed0b32b89da1ce2cb7 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 23 Oct 2018 17:01:44 +0200 Subject: uriparser: do not reset flags if already set diff --git a/m4/uriparser.m4 b/m4/uriparser.m4 index c77f764..dbb8a55 100644 --- a/m4/uriparser.m4 +++ b/m4/uriparser.m4 @@ -31,7 +31,9 @@ AC_DEFUN([URIPARSER_CHECK], AC_CHECK_PROG(PKGCONFIG,pkg-config,pkg-config,no) - if test -d "$_uriparser_with" ; then + if test "x$URIPARSER" != "x" || test "x$URIPARSER_CPPFLAGS" != "x"; then + : + elif test -d "$_uriparser_with" ; then URIPARSER_CPPFLAGS="-I$withval/include" _uriparser_ldflags="-L$withval/lib" @@ -73,14 +75,14 @@ AC_DEFUN([URIPARSER_CHECK], unset _uriparser_wanted else - dnl no pkg-config, ok, to our best and set some defaults + dnl no pkg-config, ok, do our best and set some defaults URIPARSER_CPPFLAGS="-I/usr/include" URIPARSER="-luriparser -L/usr/lib -L/usr/lib64 -L/usr/lib/x86_64-linux-gnu -L/usr/lib/i686-linux-gnu" fi if test $_uriparser_try_link = yes ; then - # we didn't find curl-config, so let's see if the user-supplied + # let's see if the user-supplied # link line (or failing that, "-luriparser") is enough. URIPARSER=${URIPARSER-"$_uriparser_ldflags -luriparser"} -- cgit v0.10-9-g596f From 7a46c98f830526a0e682d28d5a9db3d838ac9f36 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 09:17:16 +0200 Subject: check_curl: do not build check_curl if curllibs are missing diff --git a/configure.ac b/configure.ac index 1fccf53..725bf0f 100644 --- a/configure.ac +++ b/configure.ac @@ -403,7 +403,6 @@ LIBCURL_CHECK_CONFIG(yes, 7.15.2, [ dnl Check for uriparser library URIPARSER_CHECK(yes, 0.7.5, [ - _can_enable_check_curl=yes URIPARSERINCLUDE="$URIPARSER_CPPFLAGS" URIPARSERLIBS="$URIPARSER" URIPARSERCFLAGS="$URIPARSER_CPPFLAGS" @@ -418,10 +417,10 @@ URIPARSER_CHECK(yes, 0.7.5, [ dnl prerequisites met, enable the plugin if test x$_can_enable_check_curl = xyes; then -EXTRAS="$EXTRAS check_curl\$(EXEEXT)" + EXTRAS="$EXTRAS check_curl\$(EXEEXT)" -dnl Enable bundled picohttpparser library (for now) -AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) + dnl Enable bundled picohttpparser library (for now) + AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) fi AM_CONDITIONAL([WITH_CHECK_CURL], [test "$_can_enable_check_curl" = "yes"]) AM_COND_IF([WITH_CHECK_CURL], -- cgit v0.10-9-g596f From 7061a76f89a21872c4af365035e4fdb9e4629663 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 09:54:20 +0200 Subject: builds: alway put picohttpparser into the dist tarball substituting PICOHTTPPARSER_DIR only when curl gets build, leads to different dist tarballs depending on wether libcurl was available or not. This then breaks later builds from this tarball because of the missing files. diff --git a/configure.ac b/configure.ac index 725bf0f..3b5ca6b 100644 --- a/configure.ac +++ b/configure.ac @@ -418,9 +418,6 @@ URIPARSER_CHECK(yes, 0.7.5, [ dnl prerequisites met, enable the plugin if test x$_can_enable_check_curl = xyes; then EXTRAS="$EXTRAS check_curl\$(EXEEXT)" - - dnl Enable bundled picohttpparser library (for now) - AC_SUBST(PICOHTTPPARSER_DIR, picohttpparser) fi AM_CONDITIONAL([WITH_CHECK_CURL], [test "$_can_enable_check_curl" = "yes"]) AM_COND_IF([WITH_CHECK_CURL], diff --git a/plugins/Makefile.am b/plugins/Makefile.am index ee78177..3fde54d 100644 --- a/plugins/Makefile.am +++ b/plugins/Makefile.am @@ -40,7 +40,7 @@ EXTRA_PROGRAMS = check_mysql check_radius check_pgsql check_snmp check_hpjd \ check_nagios check_by_ssh check_dns check_nt check_ide_smart \ check_procs check_mysql_query check_apt check_dbi check_curl -SUBDIRS = @PICOHTTPPARSER_DIR@ +SUBDIRS = picohttpparser EXTRA_DIST = t tests -- cgit v0.10-9-g596f From 6bcd135f9b6360d7426e3b86f57edd1533781ae7 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 09:59:59 +0200 Subject: cleanup gitignore these files have been removed meanwhile diff --git a/.gitignore b/.gitignore index df863c7..c7b668e 100644 --- a/.gitignore +++ b/.gitignore @@ -209,12 +209,6 @@ NP-VERSION-FILE /plugins/picohttpparser/.deps /plugins/picohttpparser/libpicohttpparser.a -# /plugins/uriparser -/plugins/uriparser/Makefile -/plugins/uriparser/Makefile.in -/plugins/uriparser/.deps -/plugins/uriparser/liburiparser.a - # /plugins/t/ /plugins/t/*.tmp -- cgit v0.10-9-g596f From 4ec057d89a406a3e40b9baf72d3df4c81637b7c8 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 10:00:39 +0200 Subject: travis: --enable-check-curl is no longer required diff --git a/.travis.yml b/.travis.yml index e725004..e80b34e 100644 --- a/.travis.yml +++ b/.travis.yml @@ -70,7 +70,7 @@ before_script: # Detect LDAP configuration (seems volatile on trusty env) - sed -e 's/cn=admin,dc=nodomain/'$(sudo /usr/sbin/slapcat|grep ^dn:|grep cn=|awk '{print $2}')'/' -i plugins/t/NPTest.cache.travis - tools/setup - - ./configure --enable-libtap --enable-check-curl + - ./configure --enable-libtap - make - export NPTEST_CACHE="$(pwd)/plugins/t/NPTest.cache.travis" - ssh-keygen -t dsa -N "" -f ~/.ssh/id_dsa -- cgit v0.10-9-g596f From b2f7eca374577b3982e6242376b812c0088ba7ef Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 10:09:02 +0200 Subject: check_curl: fix builds if curl is not enabled diff --git a/.travis.yml b/.travis.yml index e80b34e..dc56356 100644 --- a/.travis.yml +++ b/.travis.yml @@ -56,6 +56,7 @@ install: - sudo apt-get install -qq --no-install-recommends faketime - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl - sudo apt-get install -qq --no-install-recommends libcurl4-openssl-dev + - sudo apt-get install -qq --no-install-recommends liburiparser-dev # Trusty related dependencies (not yet provided) - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server # enable ssl apache diff --git a/configure.ac b/configure.ac index 3b5ca6b..d50e4e9 100644 --- a/configure.ac +++ b/configure.ac @@ -420,8 +420,7 @@ if test x$_can_enable_check_curl = xyes; then EXTRAS="$EXTRAS check_curl\$(EXEEXT)" fi AM_CONDITIONAL([WITH_CHECK_CURL], [test "$_can_enable_check_curl" = "yes"]) -AM_COND_IF([WITH_CHECK_CURL], - [AC_CONFIG_FILES([plugins/picohttpparser/Makefile])]) +AC_CONFIG_FILES([plugins/picohttpparser/Makefile]) dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface if test "$ac_cv_header_utmpx_h" = "no" -a "$ac_cv_header_wtsapi32_h" = "no" -- cgit v0.10-9-g596f From 87065ac4482c40247e285da27351b72b3019fc87 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 12:13:26 +0200 Subject: check_curl: handle supplied port correctly if a port was given by -p, it should not be overruled by the port extracted from -H. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 63c07e3..cbf21ed 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -132,6 +132,7 @@ char *host_name; char *server_url = 0; char server_ip[DEFAULT_BUFFER_SIZE]; struct curl_slist *server_ips = NULL; +int specify_port = FALSE; unsigned short server_port = HTTP_PORT; unsigned short virtual_port = 0; int host_name_length; @@ -1223,6 +1224,7 @@ process_arguments (int argc, char **argv) if( strtol(optarg, NULL, 10) > MAX_PORT) usage2 (_("Invalid port number, supplied port number is too big"), optarg); server_port = (unsigned short)strtol(optarg, NULL, 10); + specify_port = TRUE; } break; case 'a': /* authorization info */ @@ -1378,7 +1380,7 @@ process_arguments (int argc, char **argv) #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) */ if (verbose >= 2) printf(_("* Set SSL/TLS version to %d\n"), ssl_version); - if (server_port == HTTP_PORT) + if (specify_port == FALSE) server_port = HTTPS_PORT; break; #else /* LIBCURL_FEATURE_SSL */ @@ -1542,9 +1544,9 @@ process_arguments (int argc, char **argv) if (virtual_port == 0) virtual_port = server_port; else { - if ((use_ssl && server_port == HTTPS_PORT) || - (!use_ssl && server_port == HTTP_PORT)) - server_port = virtual_port; + if ((use_ssl && server_port == HTTPS_PORT) || (!use_ssl && server_port == HTTP_PORT)) + if(specify_port == FALSE) + server_port = virtual_port; } return TRUE; -- cgit v0.10-9-g596f From ec590af49fa3498db52a118a519d8fcafd0b00ad Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 24 Oct 2018 13:36:47 +0200 Subject: check_curl: code cleanup diff --git a/plugins/check_curl.c b/plugins/check_curl.c index cbf21ed..4d37891 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -481,7 +481,7 @@ check_http (void) ssl_library = curlhelp_get_ssl_library (curl); /* try hard to get a stack of certificates to verify against */ - if (check_cert) + if (check_cert) { #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) /* inform curl to report back certificates */ switch (ssl_library) { @@ -530,6 +530,7 @@ check_http (void) else die (STATE_CRITICAL, "HTTP CRITICAL - Cannot retrieve certificates (no CURLOPT_SSL_CTX_FUNCTION, no OpenSSL library or libcurl too old and has no CURLOPT_CERTINFO)\n"); #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 19, 1) */ + } #endif /* LIBCURL_FEATURE_SSL */ -- cgit v0.10-9-g596f From 70d36a729e2bc0ecfb24751074663c21160f02f4 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 25 Oct 2018 10:29:48 +0200 Subject: check_curl: rewrite connect_to / host headers since CURLOPT_CONNECT_TO is only available in later curl versions, we do it the other way round now and set the url from the address we want to connect to and then set the host header accordingly. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 4d37891..7a516a9 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -365,25 +365,22 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout), "CURLOPT_CONNECTTIMEOUT"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); - /* compose URL: must be the host_name, only if not given take the IP address. */ - if ((use_ssl == FALSE && virtual_port == HTTP_PORT) || - (use_ssl == TRUE && virtual_port == HTTPS_PORT)) - snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s%s", use_ssl ? "https" : "http", - host_name ? host_name : server_address, server_url); - else - snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", use_ssl ? "https" : "http", - host_name ? host_name : server_address, virtual_port, server_url); + /* compose URL: use the address we want to connect to, set Host: header later */ + snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", + use_ssl ? "https" : "http", + server_address, + server_port, + server_url + ); + + if (verbose>=1) + printf ("* curl CURLOPT_URL: %s\n", url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); /* cURL does certificate checking against the host name from the URL above * So we use CURLOPT_CONNECT_TO or CURLOPT_RESOLVE to handle differing * host names and/or ports */ -#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 49, 0) - snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s:%d", host_name ? host_name : server_address, virtual_port, server_address, server_port); - server_ips = curl_slist_append (server_ips, server_ip); - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECT_TO, server_ips), "CURLOPT_CONNECT_TO"); - -#elif LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) if (host_name && strcmp (host_name, server_address)) { snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); server_ips = curl_slist_append (server_ips, server_ip); @@ -411,8 +408,17 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CUSTOMREQUEST, http_method), "CURLOPT_CUSTOMREQUEST"); } + /* check if Host header is explicitly set in options */ + if (http_opt_headers_count) { + for (i = 0; i < http_opt_headers_count ; i++) { + if (strncmp(http_opt_headers[i], "Host:", 5) == 0) { + force_host_header = http_opt_headers[i]; + } + } + } + /* set hostname (virtual hosts), not needed if CURLOPT_CONNECT_TO is used, but left in anyway */ - if(host_name != NULL) { + if(host_name != NULL && force_host_header == NULL) { if((virtual_port != HTTP_PORT && !use_ssl) || (virtual_port != HTTPS_PORT && use_ssl)) { snprintf(http_header, DEFAULT_BUFFER_SIZE, "Host: %s:%d", host_name, virtual_port); } else { @@ -425,22 +431,11 @@ check_http (void) snprintf (http_header, DEFAULT_BUFFER_SIZE, "Connection: close"); header_list = curl_slist_append (header_list, http_header); - /* check if Host header is explicitly set in options */ - if (http_opt_headers_count) { - for (i = 0; i < http_opt_headers_count ; i++) { - if (strncmp(http_opt_headers[i], "Host:", 5) == 0) { - force_host_header = http_opt_headers[i]; - } - } - } - /* attach additional headers supplied by the user */ /* optionally send any other header tag */ if (http_opt_headers_count) { for (i = 0; i < http_opt_headers_count ; i++) { - if (force_host_header != http_opt_headers[i]) { - header_list = curl_slist_append (header_list, http_opt_headers[i]); - } + header_list = curl_slist_append (header_list, http_opt_headers[i]); } /* This cannot be free'd here because a redirection will then try to access this and segfault */ /* Covered in a testcase in tests/check_http.t */ diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index e67fafb..050416c 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -9,7 +9,7 @@ use Test::More; use POSIX qw/mktime strftime/; use NPTest; -plan tests => 49; +plan tests => 57; my $successOutput = '/OK.*HTTP.*second/'; @@ -78,15 +78,27 @@ like( $res->output, "/cURL returned 6 - Couldn't resolve host name/", "Output OK # host header checks $res = NPTest->testCmd("./$plugin -v -H $host_tcp_http"); like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); $res = NPTest->testCmd("./$plugin -v -H $host_tcp_http -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.'\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); $res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); $res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80"); like( $res->output, '/^Host: '.$host_tcp_http.':8080\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); + +$res = NPTest->testCmd("./$plugin -v -H $host_tcp_http:8080 -p 80 -k 'Host: testhost:8001'"); +like( $res->output, '/^Host: testhost:8001\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); + +$res = NPTest->testCmd("./$plugin -v -I $host_tcp_http -p 80 -k 'Host: testhost:8001'"); +like( $res->output, '/^Host: testhost:8001\s*$/ms', "Host Header OK" ); +like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); SKIP: { skip "No internet access", 3 if $internet_access eq "no"; -- cgit v0.10-9-g596f From 36fd675fbe02f2492c4adbb001da38856f96c2f2 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 29 Oct 2018 15:09:57 +0100 Subject: check_curl: code cleanup CURLOPT_RESOLVE is not required, since we do not verify certificates in any way. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 7a516a9..58f454b 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -377,17 +377,6 @@ check_http (void) printf ("* curl CURLOPT_URL: %s\n", url); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, url), "CURLOPT_URL"); - /* cURL does certificate checking against the host name from the URL above - * So we use CURLOPT_CONNECT_TO or CURLOPT_RESOLVE to handle differing - * host names and/or ports */ -#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) - if (host_name && strcmp (host_name, server_address)) { - snprintf (server_ip, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); - server_ips = curl_slist_append (server_ips, server_ip); - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_RESOLVE, server_ips), "CURLOPT_RESOLVE"); - } -#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 3) */ - /* extract proxy information for legacy proxy https requests */ if (!strcmp(http_method, "CONNECT") || strstr(server_url, "http") == server_url) { handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_PROXY, server_address), "CURLOPT_PROXY"); -- cgit v0.10-9-g596f From d659f8d99faa0738be0ddcdb822f41e7f8c7f829 Mon Sep 17 00:00:00 2001 From: Markus Frosch Date: Wed, 31 Oct 2018 15:22:50 +0100 Subject: Allow user to specify HTTP method after proxy CONNECT Simple format, avoids refactoring the CONNECT feature. diff --git a/plugins/check_http.c b/plugins/check_http.c index 86a36c2..1e2a54c 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -126,6 +126,7 @@ int max_page_len = 0; int redir_depth = 0; int max_depth = 15; char *http_method; +char *http_method_proxy; char *http_post_data; char *http_content_type; char buffer[MAX_INPUT_BUFFER]; @@ -446,6 +447,12 @@ process_arguments (int argc, char **argv) if (http_method) free(http_method); http_method = strdup (optarg); + char *tmp; + if ((tmp = strstr(http_method, ":")) > 0) { + tmp[0] = '\0'; + http_method = http_method; + http_method_proxy = ++tmp; + } break; case 'd': /* string or substring */ strncpy (header_expect, optarg, MAX_INPUT_BUFFER - 1); @@ -566,6 +573,9 @@ process_arguments (int argc, char **argv) if (http_method == NULL) http_method = strdup ("GET"); + if (http_method_proxy == NULL) + http_method_proxy = strdup ("GET"); + if (client_cert && !client_privkey) usage4 (_("If you use a client certificate you must also specify a private key file")); @@ -950,7 +960,7 @@ check_http (void) if ( server_address != NULL && strcmp(http_method, "CONNECT") == 0 && host_name != NULL && use_ssl == TRUE) - asprintf (&buf, "%s %s %s\r\n%s\r\n", "GET", server_url, host_name ? "HTTP/1.1" : "HTTP/1.0", user_agent); + asprintf (&buf, "%s %s %s\r\n%s\r\n", http_method_proxy, server_url, host_name ? "HTTP/1.1" : "HTTP/1.0", user_agent); else asprintf (&buf, "%s %s %s\r\n%s\r\n", http_method, server_url, host_name ? "HTTP/1.1" : "HTTP/1.0", user_agent); @@ -1581,7 +1591,7 @@ print_help (void) printf (" %s\n", _("URL to GET or POST (default: /)")); printf (" %s\n", "-P, --post=STRING"); printf (" %s\n", _("URL encoded http POST data")); - printf (" %s\n", "-j, --method=STRING (for example: HEAD, OPTIONS, TRACE, PUT, DELETE, CONNECT)"); + printf (" %s\n", "-j, --method=STRING (for example: HEAD, OPTIONS, TRACE, PUT, DELETE, CONNECT, CONNECT:POST)"); printf (" %s\n", _("Set HTTP method.")); printf (" %s\n", "-N, --no-body"); printf (" %s\n", _("Don't wait for document body: stop reading after headers.")); @@ -1668,7 +1678,8 @@ print_help (void) printf (" %s\n", _("all these options are needed: -I -p -u -S(sl) -j CONNECT -H ")); printf (" %s\n", _("a STATE_OK will be returned. When the server returns its content but exceeds")); printf (" %s\n", _("the 5-second threshold, a STATE_WARNING will be returned. When an error occurs,")); - printf (" %s\n", _("a STATE_CRITICAL will be returned.")); + printf (" %s\n", _("a STATE_CRITICAL will be returned. By adding a colon to the method you can set the method used")); + printf (" %s\n", _("inside the proxied connection: -j CONNECT:POST")); #endif -- cgit v0.10-9-g596f From 198611a3c2bd89562af87d8bf0c7584fce1ce037 Mon Sep 17 00:00:00 2001 From: Markus Frosch Date: Tue, 6 Nov 2018 11:32:52 +0100 Subject: test: Add proxy tests via proxy On Travis with a local squid diff --git a/.travis.yml b/.travis.yml index 617c415..123e178 100644 --- a/.travis.yml +++ b/.travis.yml @@ -55,6 +55,7 @@ install: - sudo apt-get install -qq --no-install-recommends autoconf automake - sudo apt-get install -qq --no-install-recommends faketime - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl + - sudo apt-get install -qq --no-install-recommends squid3 # Trusty related dependencies (not yet provided) - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server # enable ssl apache @@ -62,6 +63,8 @@ install: - sudo a2ensite default-ssl - sudo make-ssl-cert generate-default-snakeoil --force-overwrite - sudo service apache2 reload + - sudo cp tools/squid.conf /etc/squid3/squid.conf + - sudo service squid3 reload before_script: # ensure we have a test database in place for tests @@ -93,4 +96,3 @@ notifications: skip_join: true email: # - team@monitoring-plugins.org - diff --git a/plugins/t/NPTest.cache.travis b/plugins/t/NPTest.cache.travis index e9705f3..28437a0 100644 --- a/plugins/t/NPTest.cache.travis +++ b/plugins/t/NPTest.cache.travis @@ -59,4 +59,6 @@ 'host_udp_time' => 'none', 'host_tls_http' => 'localhost', 'host_tls_cert' => 'localhost', + 'NP_HOST_TCP_PROXY' => 'localhost', + 'NP_PORT_TCP_PROXY' => '3128', } diff --git a/plugins/t/check_http.t b/plugins/t/check_http.t index 8bd484a..416fbbc 100644 --- a/plugins/t/check_http.t +++ b/plugins/t/check_http.t @@ -9,7 +9,7 @@ use Test::More; use POSIX qw/mktime strftime/; use NPTest; -plan tests => 49; +plan tests => 55; my $successOutput = '/OK.*HTTP.*second/'; @@ -42,6 +42,14 @@ my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", "A host providing an index page containing the string 'monitoring'", "test.monitoring-plugins.org" ); +my $host_tcp_proxy = getTestParameter( "NP_HOST_TCP_PROXY", + "A host providing a HTTP proxy with CONNECT support", + "localhost"); + +my $port_tcp_proxy = getTestParameter( "NP_PORT_TCP_PROXY", + "Port of the proxy with HTTP and CONNECT support", + "3128"); + my $faketime = -x '/usr/bin/faketime' ? 1 : 0; @@ -198,3 +206,19 @@ SKIP: { $res = NPTest->testCmd( "./check_http -H www.mozilla.com --extended-perfdata" ); like ( $res->output, '/time_connect=[\d\.]+/', 'Extended Performance Data Output OK' ); } + +SKIP: { + skip "No internet access or proxy configured", 6 if $internet_access eq "no" or ! $host_tcp_proxy; + + $res = NPTest->testCmd( "./check_http -I $host_tcp_proxy -p $port_tcp_proxy -u http://$host_tcp_http -e 200,301,302"); + is( $res->return_code, 0, "Proxy HTTP works"); + like($res->output, qr/OK: Status line output matched/, "Proxy HTTP Output is sufficent"); + + $res = NPTest->testCmd( "./check_http -I $host_tcp_proxy -p $port_tcp_proxy -H $host_tls_http -S -j CONNECT"); + is( $res->return_code, 0, "Proxy HTTP CONNECT works"); + like($res->output, qr/HTTP OK:/, "Proxy HTTP CONNECT output sufficent"); + + $res = NPTest->testCmd( "./check_http -I $host_tcp_proxy -p $port_tcp_proxy -H $host_tls_http -S -j CONNECT:HEAD"); + is( $res->return_code, 0, "Proxy HTTP CONNECT works with override method"); + like($res->output, qr/HTTP OK:/, "Proxy HTTP CONNECT output sufficent"); +} diff --git a/tools/squid.conf b/tools/squid.conf new file mode 100644 index 0000000..bed7a58 --- /dev/null +++ b/tools/squid.conf @@ -0,0 +1,7979 @@ +# WELCOME TO SQUID 3.5.27 +# ---------------------------- +# +# This is the documentation for the Squid configuration file. +# This documentation can also be found online at: +# http://www.squid-cache.org/Doc/config/ +# +# You may wish to look at the Squid home page and wiki for the +# FAQ and other documentation: +# http://www.squid-cache.org/ +# http://wiki.squid-cache.org/SquidFaq +# http://wiki.squid-cache.org/ConfigExamples +# +# This documentation shows what the defaults for various directives +# happen to be. If you don't need to change the default, you should +# leave the line out of your squid.conf in most cases. +# +# In some cases "none" refers to no default setting at all, +# while in other cases it refers to the value of the option +# - the comments for that keyword indicate if this is the case. +# + +# Configuration options can be included using the "include" directive. +# Include takes a list of files to include. Quoting and wildcards are +# supported. +# +# For example, +# +# include /path/to/included/file/squid.acl.config +# +# Includes can be nested up to a hard-coded depth of 16 levels. +# This arbitrary restriction is to prevent recursive include references +# from causing Squid entering an infinite loop whilst trying to load +# configuration files. +# +# Values with byte units +# +# Squid accepts size units on some size related directives. All +# such directives are documented with a default value displaying +# a unit. +# +# Units accepted by Squid are: +# bytes - byte +# KB - Kilobyte (1024 bytes) +# MB - Megabyte +# GB - Gigabyte +# +# Values with spaces, quotes, and other special characters +# +# Squid supports directive parameters with spaces, quotes, and other +# special characters. Surround such parameters with "double quotes". Use +# the configuration_includes_quoted_values directive to enable or +# disable that support. +# +# Squid supports reading configuration option parameters from external +# files using the syntax: +# parameters("/path/filename") +# For example: +# acl whitelist dstdomain parameters("/etc/squid/whitelist.txt") +# +# Conditional configuration +# +# If-statements can be used to make configuration directives +# depend on conditions: +# +# if +# ... regular configuration directives ... +# [else +# ... regular configuration directives ...] +# endif +# +# The else part is optional. The keywords "if", "else", and "endif" +# must be typed on their own lines, as if they were regular +# configuration directives. +# +# NOTE: An else-if condition is not supported. +# +# These individual conditions types are supported: +# +# true +# Always evaluates to true. +# false +# Always evaluates to false. +# = +# Equality comparison of two integer numbers. +# +# +# SMP-Related Macros +# +# The following SMP-related preprocessor macros can be used. +# +# ${process_name} expands to the current Squid process "name" +# (e.g., squid1, squid2, or cache1). +# +# ${process_number} expands to the current Squid process +# identifier, which is an integer number (e.g., 1, 2, 3) unique +# across all Squid processes of the current service instance. +# +# ${service_name} expands into the current Squid service instance +# name identifier which is provided by -n on the command line. +# + +# TAG: broken_vary_encoding +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: cache_vary +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: error_map +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: external_refresh_check +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: location_rewrite_program +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: refresh_stale_hit +# This option is not yet supported by Squid-3. +#Default: +# none + +# TAG: hierarchy_stoplist +# Remove this line. Use always_direct or cache_peer_access ACLs instead if you need to prevent cache_peer use. +#Default: +# none + +# TAG: log_access +# Remove this line. Use acls with access_log directives to control access logging +#Default: +# none + +# TAG: log_icap +# Remove this line. Use acls with icap_log directives to control icap logging +#Default: +# none + +# TAG: ignore_ims_on_miss +# Remove this line. The HTTP/1.1 feature is now configured by 'cache_miss_revalidate'. +#Default: +# none + +# TAG: chunked_request_body_max_size +# Remove this line. Squid is now HTTP/1.1 compliant. +#Default: +# none + +# TAG: dns_v4_fallback +# Remove this line. Squid performs a 'Happy Eyeballs' algorithm, the 'fallback' algorithm is no longer relevant. +#Default: +# none + +# TAG: emulate_httpd_log +# Replace this with an access_log directive using the format 'common' or 'combined'. +#Default: +# none + +# TAG: forward_log +# Use a regular access.log with ACL limiting it to MISS events. +#Default: +# none + +# TAG: ftp_list_width +# Remove this line. Configure FTP page display using the CSS controls in errorpages.css instead. +#Default: +# none + +# TAG: ignore_expect_100 +# Remove this line. The HTTP/1.1 feature is now fully supported by default. +#Default: +# none + +# TAG: log_fqdn +# Remove this option from your config. To log FQDN use %>A in the log format. +#Default: +# none + +# TAG: log_ip_on_direct +# Remove this option from your config. To log server or peer names use % +##auth_param negotiate children 20 startup=0 idle=1 +##auth_param negotiate keep_alive on +## +##auth_param digest program +##auth_param digest children 20 startup=0 idle=1 +##auth_param digest realm Squid proxy-caching web server +##auth_param digest nonce_garbage_interval 5 minutes +##auth_param digest nonce_max_duration 30 minutes +##auth_param digest nonce_max_count 50 +## +##auth_param ntlm program +##auth_param ntlm children 20 startup=0 idle=1 +##auth_param ntlm keep_alive on +## +##auth_param basic program +##auth_param basic children 5 startup=5 idle=1 +##auth_param basic realm Squid proxy-caching web server +##auth_param basic credentialsttl 2 hours +#Default: +# none + +# TAG: authenticate_cache_garbage_interval +# The time period between garbage collection across the username cache. +# This is a trade-off between memory utilization (long intervals - say +# 2 days) and CPU (short intervals - say 1 minute). Only change if you +# have good reason to. +#Default: +# authenticate_cache_garbage_interval 1 hour + +# TAG: authenticate_ttl +# The time a user & their credentials stay in the logged in +# user cache since their last request. When the garbage +# interval passes, all user credentials that have passed their +# TTL are removed from memory. +#Default: +# authenticate_ttl 1 hour + +# TAG: authenticate_ip_ttl +# If you use proxy authentication and the 'max_user_ip' ACL, +# this directive controls how long Squid remembers the IP +# addresses associated with each user. Use a small value +# (e.g., 60 seconds) if your users might change addresses +# quickly, as is the case with dialup. You might be safe +# using a larger value (e.g., 2 hours) in a corporate LAN +# environment with relatively static address assignments. +#Default: +# authenticate_ip_ttl 1 second + +# ACCESS CONTROLS +# ----------------------------------------------------------------------------- + +# TAG: external_acl_type +# This option defines external acl classes using a helper program +# to look up the status +# +# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..] +# +# Options: +# +# ttl=n TTL in seconds for cached results (defaults to 3600 +# for 1 hour) +# +# negative_ttl=n +# TTL for cached negative lookups (default same +# as ttl) +# +# grace=n Percentage remaining of TTL where a refresh of a +# cached entry should be initiated without needing to +# wait for a new reply. (default is for no grace period) +# +# cache=n The maximum number of entries in the result cache. The +# default limit is 262144 entries. Each cache entry usually +# consumes at least 256 bytes. Squid currently does not remove +# expired cache entries until the limit is reached, so a proxy +# will sooner or later reach the limit. The expanded FORMAT +# value is used as the cache key, so if the details in FORMAT +# are highly variable, a larger cache may be needed to produce +# reduction in helper load. +# +# children-max=n +# Maximum number of acl helper processes spawned to service +# external acl lookups of this type. (default 5) +# +# children-startup=n +# Minimum number of acl helper processes to spawn during +# startup and reconfigure to service external acl lookups +# of this type. (default 0) +# +# children-idle=n +# Number of acl helper processes to keep ahead of traffic +# loads. Squid will spawn this many at once whenever load +# rises above the capabilities of existing processes. +# Up to the value of children-max. (default 1) +# +# concurrency=n concurrency level per process. Only used with helpers +# capable of processing more than one query at a time. +# +# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers. +# +# ipv4 / ipv6 IP protocol used to communicate with this helper. +# The default is to auto-detect IPv6 and use it when available. +# +# +# FORMAT specifications +# +# %LOGIN Authenticated user login name +# %un A user name. Expands to the first available name +# from the following list of information sources: +# - authenticated user name, like %ul or %LOGIN +# - user name sent by an external ACL, like %EXT_USER +# - SSL client name, like %us in logformat +# - ident user name, like %ui in logformat +# %EXT_USER Username from previous external acl +# %EXT_LOG Log details from previous external acl +# %EXT_TAG Tag from previous external acl +# %IDENT Ident user name +# %SRC Client IP +# %SRCPORT Client source port +# %URI Requested URI +# %DST Requested host +# %PROTO Requested URL scheme +# %PORT Requested port +# %PATH Requested URL path +# %METHOD Request method +# %MYADDR Squid interface address +# %MYPORT Squid http_port number +# %PATH Requested URL-path (including query-string if any) +# %USER_CERT SSL User certificate in PEM format +# %USER_CERTCHAIN SSL User certificate chain in PEM format +# %USER_CERT_xx SSL User certificate subject attribute xx +# %USER_CA_CERT_xx SSL User certificate issuer attribute xx +# %ssl::>sni SSL client SNI sent to Squid +# %ssl::{Header} HTTP request header "Header" +# %>{Hdr:member} +# HTTP request header "Hdr" list member "member" +# %>{Hdr:;member} +# HTTP request header list member using ; as +# list separator. ; can be any non-alphanumeric +# character. +# +# %<{Header} HTTP reply header "Header" +# %<{Hdr:member} +# HTTP reply header "Hdr" list member "member" +# %<{Hdr:;member} +# HTTP reply header list member using ; as +# list separator. ; can be any non-alphanumeric +# character. +# +# %ACL The name of the ACL being tested. +# %DATA The ACL arguments. If not used then any arguments +# is automatically added at the end of the line +# sent to the helper. +# NOTE: this will encode the arguments as one token, +# whereas the default will pass each separately. +# +# %% The percent sign. Useful for helpers which need +# an unchanging input format. +# +# +# General request syntax: +# +# [channel-ID] FORMAT-values [acl-values ...] +# +# +# FORMAT-values consists of transaction details expanded with +# whitespace separation per the config file FORMAT specification +# using the FORMAT macros listed above. +# +# acl-values consists of any string specified in the referencing +# config 'acl ... external' line. see the "acl external" directive. +# +# Request values sent to the helper are URL escaped to protect +# each value in requests against whitespaces. +# +# If using protocol=2.5 then the request sent to the helper is not +# URL escaped to protect against whitespace. +# +# NOTE: protocol=3.0 is deprecated as no longer necessary. +# +# When using the concurrency= option the protocol is changed by +# introducing a query channel tag in front of the request/response. +# The query channel tag is a number between 0 and concurrency-1. +# This value must be echoed back unchanged to Squid as the first part +# of the response relating to its request. +# +# +# The helper receives lines expanded per the above format specification +# and for each input line returns 1 line starting with OK/ERR/BH result +# code and optionally followed by additional keywords with more details. +# +# +# General result syntax: +# +# [channel-ID] result keyword=value ... +# +# Result consists of one of the codes: +# +# OK +# the ACL test produced a match. +# +# ERR +# the ACL test does not produce a match. +# +# BH +# An internal error occurred in the helper, preventing +# a result being identified. +# +# The meaning of 'a match' is determined by your squid.conf +# access control configuration. See the Squid wiki for details. +# +# Defined keywords: +# +# user= The users name (login) +# +# password= The users password (for login= cache_peer option) +# +# message= Message describing the reason for this response. +# Available as %o in error pages. +# Useful on (ERR and BH results). +# +# tag= Apply a tag to a request. Only sets a tag once, +# does not alter existing tags. +# +# log= String to be logged in access.log. Available as +# %ea in logformat specifications. +# +# clt_conn_tag= Associates a TAG with the client TCP connection. +# Please see url_rewrite_program related documentation +# for this kv-pair. +# +# Any keywords may be sent on any response whether OK, ERR or BH. +# +# All response keyword values need to be a single token with URL +# escaping, or enclosed in double quotes (") and escaped using \ on +# any double quotes or \ characters within the value. The wrapping +# double quotes are removed before the value is interpreted by Squid. +# \r and \n are also replace by CR and LF. +# +# Some example key values: +# +# user=John%20Smith +# user="John Smith" +# user="J. \"Bob\" Smith" +#Default: +# none + +# TAG: acl +# Defining an Access List +# +# Every access list definition must begin with an aclname and acltype, +# followed by either type-specific arguments or a quoted filename that +# they are read from. +# +# acl aclname acltype argument ... +# acl aclname acltype "file" ... +# +# When using "file", the file should contain one item per line. +# +# Some acl types supports options which changes their default behaviour. +# The available options are: +# +# -i,+i By default, regular expressions are CASE-SENSITIVE. To make them +# case-insensitive, use the -i option. To return case-sensitive +# use the +i option between patterns, or make a new ACL line +# without -i. +# +# -n Disable lookups and address type conversions. If lookup or +# conversion is required because the parameter type (IP or +# domain name) does not match the message address type (domain +# name or IP), then the ACL would immediately declare a mismatch +# without any warnings or lookups. +# +# -- Used to stop processing all options, in the case the first acl +# value has '-' character as first character (for example the '-' +# is a valid domain name) +# +# Some acl types require suspending the current request in order +# to access some external data source. +# Those which do are marked with the tag [slow], those which +# don't are marked as [fast]. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl +# for further information +# +# ***** ACL TYPES AVAILABLE ***** +# +# acl aclname src ip-address/mask ... # clients IP address [fast] +# acl aclname src addr1-addr2/mask ... # range of addresses [fast] +# acl aclname dst [-n] ip-address/mask ... # URL host's IP address [slow] +# acl aclname localip ip-address/mask ... # IP address the client connected to [fast] +# +# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation) +# # [fast] +# # The 'arp' ACL code is not portable to all operating systems. +# # It works on Linux, Solaris, Windows, FreeBSD, and some other +# # BSD variants. +# # +# # NOTE: Squid can only determine the MAC/EUI address for IPv4 +# # clients that are on the same subnet. If the client is on a +# # different subnet, then Squid cannot find out its address. +# # +# # NOTE 2: IPv6 protocol does not contain ARP. MAC/EUI is either +# # encoded directly in the IPv6 address or not available. +# +# acl aclname srcdomain .foo.com ... +# # reverse lookup, from client IP [slow] +# acl aclname dstdomain [-n] .foo.com ... +# # Destination server from URL [fast] +# acl aclname srcdom_regex [-i] \.foo\.com ... +# # regex matching client name [slow] +# acl aclname dstdom_regex [-n] [-i] \.foo\.com ... +# # regex matching server [fast] +# # +# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP +# # based URL is used and no match is found. The name "none" is used +# # if the reverse lookup fails. +# +# acl aclname src_as number ... +# acl aclname dst_as number ... +# # [fast] +# # Except for access control, AS numbers can be used for +# # routing of requests to specific caches. Here's an +# # example for routing all requests for AS#1241 and only +# # those to mycache.mydomain.net: +# # acl asexample dst_as 1241 +# # cache_peer_access mycache.mydomain.net allow asexample +# # cache_peer_access mycache_mydomain.net deny all +# +# acl aclname peername myPeer ... +# # [fast] +# # match against a named cache_peer entry +# # set unique name= on cache_peer lines for reliable use. +# +# acl aclname time [day-abbrevs] [h1:m1-h2:m2] +# # [fast] +# # day-abbrevs: +# # S - Sunday +# # M - Monday +# # T - Tuesday +# # W - Wednesday +# # H - Thursday +# # F - Friday +# # A - Saturday +# # h1:m1 must be less than h2:m2 +# +# acl aclname url_regex [-i] ^http:// ... +# # regex matching on whole URL [fast] +# acl aclname urllogin [-i] [^a-zA-Z0-9] ... +# # regex matching on URL login field +# acl aclname urlpath_regex [-i] \.gif$ ... +# # regex matching on URL path [fast] +# +# acl aclname port 80 70 21 0-1024... # destination TCP port [fast] +# # ranges are alloed +# acl aclname localport 3128 ... # TCP port the client connected to [fast] +# # NP: for interception mode this is usually '80' +# +# acl aclname myportname 3128 ... # *_port name [fast] +# +# acl aclname proto HTTP FTP ... # request protocol [fast] +# +# acl aclname method GET POST ... # HTTP request method [fast] +# +# acl aclname http_status 200 301 500- 400-403 ... +# # status code in reply [fast] +# +# acl aclname browser [-i] regexp ... +# # pattern match on User-Agent header (see also req_header below) [fast] +# +# acl aclname referer_regex [-i] regexp ... +# # pattern match on Referer header [fast] +# # Referer is highly unreliable, so use with care +# +# acl aclname ident username ... +# acl aclname ident_regex [-i] pattern ... +# # string match on ident output [slow] +# # use REQUIRED to accept any non-null ident. +# +# acl aclname proxy_auth [-i] username ... +# acl aclname proxy_auth_regex [-i] pattern ... +# # perform http authentication challenge to the client and match against +# # supplied credentials [slow] +# # +# # takes a list of allowed usernames. +# # use REQUIRED to accept any valid username. +# # +# # Will use proxy authentication in forward-proxy scenarios, and plain +# # http authenticaiton in reverse-proxy scenarios +# # +# # NOTE: when a Proxy-Authentication header is sent but it is not +# # needed during ACL checking the username is NOT logged +# # in access.log. +# # +# # NOTE: proxy_auth requires a EXTERNAL authentication program +# # to check username/password combinations (see +# # auth_param directive). +# # +# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy +# # as the browser needs to be configured for using a proxy in order +# # to respond to proxy authentication. +# +# acl aclname snmp_community string ... +# # A community string to limit access to your SNMP Agent [fast] +# # Example: +# # +# # acl snmppublic snmp_community public +# +# acl aclname maxconn number +# # This will be matched when the client's IP address has +# # more than TCP connections established. [fast] +# # NOTE: This only measures direct TCP links so X-Forwarded-For +# # indirect clients are not counted. +# +# acl aclname max_user_ip [-s] number +# # This will be matched when the user attempts to log in from more +# # than different ip addresses. The authenticate_ip_ttl +# # parameter controls the timeout on the ip entries. [fast] +# # If -s is specified the limit is strict, denying browsing +# # from any further IP addresses until the ttl has expired. Without +# # -s Squid will just annoy the user by "randomly" denying requests. +# # (the counter is reset each time the limit is reached and a +# # request is denied) +# # NOTE: in acceleration mode or where there is mesh of child proxies, +# # clients may appear to come from multiple addresses if they are +# # going through proxy farms, so a limit of 1 may cause user problems. +# +# acl aclname random probability +# # Pseudo-randomly match requests. Based on the probability given. +# # Probability may be written as a decimal (0.333), fraction (1/3) +# # or ratio of matches:non-matches (3:5). +# +# acl aclname req_mime_type [-i] mime-type ... +# # regex match against the mime type of the request generated +# # by the client. Can be used to detect file upload or some +# # types HTTP tunneling requests [fast] +# # NOTE: This does NOT match the reply. You cannot use this +# # to match the returned file type. +# +# acl aclname req_header header-name [-i] any\.regex\.here +# # regex match against any of the known request headers. May be +# # thought of as a superset of "browser", "referer" and "mime-type" +# # ACL [fast] +# +# acl aclname rep_mime_type [-i] mime-type ... +# # regex match against the mime type of the reply received by +# # squid. Can be used to detect file download or some +# # types HTTP tunneling requests. [fast] +# # NOTE: This has no effect in http_access rules. It only has +# # effect in rules that affect the reply data stream such as +# # http_reply_access. +# +# acl aclname rep_header header-name [-i] any\.regex\.here +# # regex match against any of the known reply headers. May be +# # thought of as a superset of "browser", "referer" and "mime-type" +# # ACLs [fast] +# +# acl aclname external class_name [arguments...] +# # external ACL lookup via a helper class defined by the +# # external_acl_type directive [slow] +# +# acl aclname user_cert attribute values... +# # match against attributes in a user SSL certificate +# # attribute is one of DN/C/O/CN/L/ST or a numerical OID [fast] +# +# acl aclname ca_cert attribute values... +# # match against attributes a users issuing CA SSL certificate +# # attribute is one of DN/C/O/CN/L/ST or a numerical OID [fast] +# +# acl aclname ext_user username ... +# acl aclname ext_user_regex [-i] pattern ... +# # string match on username returned by external acl helper [slow] +# # use REQUIRED to accept any non-null user name. +# +# acl aclname tag tagvalue ... +# # string match on tag returned by external acl helper [fast] +# # DEPRECATED. Only the first tag will match with this ACL. +# # Use the 'note' ACL instead for handling multiple tag values. +# +# acl aclname hier_code codename ... +# # string match against squid hierarchy code(s); [fast] +# # e.g., DIRECT, PARENT_HIT, NONE, etc. +# # +# # NOTE: This has no effect in http_access rules. It only has +# # effect in rules that affect the reply data stream such as +# # http_reply_access. +# +# acl aclname note name [value ...] +# # match transaction annotation [fast] +# # Without values, matches any annotation with a given name. +# # With value(s), matches any annotation with a given name that +# # also has one of the given values. +# # Names and values are compared using a string equality test. +# # Annotation sources include note and adaptation_meta directives +# # as well as helper and eCAP responses. +# +# acl aclname adaptation_service service ... +# # Matches the name of any icap_service, ecap_service, +# # adaptation_service_set, or adaptation_service_chain that Squid +# # has used (or attempted to use) for the master transaction. +# # This ACL must be defined after the corresponding adaptation +# # service is named in squid.conf. This ACL is usable with +# # adaptation_meta because it starts matching immediately after +# # the service has been selected for adaptation. +# +# acl aclname any-of acl1 acl2 ... +# # match any one of the acls [fast or slow] +# # The first matching ACL stops further ACL evaluation. +# # +# # ACLs from multiple any-of lines with the same name are ORed. +# # For example, A = (a1 or a2) or (a3 or a4) can be written as +# # acl A any-of a1 a2 +# # acl A any-of a3 a4 +# # +# # This group ACL is fast if all evaluated ACLs in the group are fast +# # and slow otherwise. +# +# acl aclname all-of acl1 acl2 ... +# # match all of the acls [fast or slow] +# # The first mismatching ACL stops further ACL evaluation. +# # +# # ACLs from multiple all-of lines with the same name are ORed. +# # For example, B = (b1 and b2) or (b3 and b4) can be written as +# # acl B all-of b1 b2 +# # acl B all-of b3 b4 +# # +# # This group ACL is fast if all evaluated ACLs in the group are fast +# # and slow otherwise. +# +# Examples: +# acl macaddress arp 09:00:2b:23:45:67 +# acl myexample dst_as 1241 +# acl password proxy_auth REQUIRED +# acl fileupload req_mime_type -i ^multipart/form-data$ +# acl javascript rep_mime_type -i ^application/x-javascript$ +# +#Default: +# ACLs all, manager, localhost, and to_localhost are predefined. +# +# +# Recommended minimum configuration: +# + +# Example rule allowing access from your local networks. +# Adapt to list your (internal) IP networks from where browsing +# should be allowed +acl localnet src 10.0.0.0/8 # RFC1918 possible internal network +acl localnet src 172.16.0.0/12 # RFC1918 possible internal network +acl localnet src 192.168.0.0/16 # RFC1918 possible internal network +acl localnet src fc00::/7 # RFC 4193 local private network range +acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines + +acl SSL_ports port 443 +acl Safe_ports port 80 # http +acl Safe_ports port 21 # ftp +acl Safe_ports port 443 # https +acl Safe_ports port 70 # gopher +acl Safe_ports port 210 # wais +acl Safe_ports port 1025-65535 # unregistered ports +acl Safe_ports port 280 # http-mgmt +acl Safe_ports port 488 # gss-http +acl Safe_ports port 591 # filemaker +acl Safe_ports port 777 # multiling http +acl CONNECT method CONNECT + +# TAG: proxy_protocol_access +# Determine which client proxies can be trusted to provide correct +# information regarding real client IP address using PROXY protocol. +# +# Requests may pass through a chain of several other proxies +# before reaching us. The original source details may by sent in: +# * HTTP message Forwarded header, or +# * HTTP message X-Forwarded-For header, or +# * PROXY protocol connection header. +# +# This directive is solely for validating new PROXY protocol +# connections received from a port flagged with require-proxy-header. +# It is checked only once after TCP connection setup. +# +# A deny match results in TCP connection closure. +# +# An allow match is required for Squid to permit the corresponding +# TCP connection, before Squid even looks for HTTP request headers. +# If there is an allow match, Squid starts using PROXY header information +# to determine the source address of the connection for all future ACL +# checks, logging, etc. +# +# SECURITY CONSIDERATIONS: +# +# Any host from which we accept client IP details can place +# incorrect information in the relevant header, and Squid +# will use the incorrect information as if it were the +# source address of the request. This may enable remote +# hosts to bypass any access control restrictions that are +# based on the client's source addresses. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# all TCP connections to ports with require-proxy-header will be denied + +# TAG: follow_x_forwarded_for +# Determine which client proxies can be trusted to provide correct +# information regarding real client IP address. +# +# Requests may pass through a chain of several other proxies +# before reaching us. The original source details may by sent in: +# * HTTP message Forwarded header, or +# * HTTP message X-Forwarded-For header, or +# * PROXY protocol connection header. +# +# PROXY protocol connections are controlled by the proxy_protocol_access +# directive which is checked before this. +# +# If a request reaches us from a source that is allowed by this +# directive, then we trust the information it provides regarding +# the IP of the client it received from (if any). +# +# For the purpose of ACLs used in this directive the src ACL type always +# matches the address we are testing and srcdomain matches its rDNS. +# +# On each HTTP request Squid checks for X-Forwarded-For header fields. +# If found the header values are iterated in reverse order and an allow +# match is required for Squid to continue on to the next value. +# The verification ends when a value receives a deny match, cannot be +# tested, or there are no more values to test. +# NOTE: Squid does not yet follow the Forwarded HTTP header. +# +# The end result of this process is an IP address that we will +# refer to as the indirect client address. This address may +# be treated as the client address for access control, ICAP, delay +# pools and logging, depending on the acl_uses_indirect_client, +# icap_uses_indirect_client, delay_pool_uses_indirect_client, +# log_uses_indirect_client and tproxy_uses_indirect_client options. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# SECURITY CONSIDERATIONS: +# +# Any host from which we accept client IP details can place +# incorrect information in the relevant header, and Squid +# will use the incorrect information as if it were the +# source address of the request. This may enable remote +# hosts to bypass any access control restrictions that are +# based on the client's source addresses. +# +# For example: +# +# acl localhost src 127.0.0.1 +# acl my_other_proxy srcdomain .proxy.example.com +# follow_x_forwarded_for allow localhost +# follow_x_forwarded_for allow my_other_proxy +#Default: +# X-Forwarded-For header will be ignored. + +# TAG: acl_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in acl matching. +# +# NOTE: maxconn ACL considers direct TCP links and indirect +# clients will always have zero. So no match. +#Default: +# acl_uses_indirect_client on + +# TAG: delay_pool_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in delay pools. +#Default: +# delay_pool_uses_indirect_client on + +# TAG: log_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in the access log. +#Default: +# log_uses_indirect_client on + +# TAG: tproxy_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address when spoofing the outgoing client. +# +# This has no effect on requests arriving in non-tproxy +# mode ports. +# +# SECURITY WARNING: Usage of this option is dangerous +# and should not be used trivially. Correct configuration +# of follow_x_forwarded_for with a limited set of trusted +# sources is required to prevent abuse of your proxy. +#Default: +# tproxy_uses_indirect_client off + +# TAG: spoof_client_ip +# Control client IP address spoofing of TPROXY traffic based on +# defined access lists. +# +# spoof_client_ip allow|deny [!]aclname ... +# +# If there are no "spoof_client_ip" lines present, the default +# is to "allow" spoofing of any suitable request. +# +# Note that the cache_peer "no-tproxy" option overrides this ACL. +# +# This clause supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow spoofing on all TPROXY traffic. + +# TAG: http_access +# Allowing or Denying access based on defined access lists +# +# To allow or deny a message received on an HTTP, HTTPS, or FTP port: +# http_access allow|deny [!]aclname ... +# +# NOTE on default values: +# +# If there are no "access" lines present, the default is to deny +# the request. +# +# If none of the "access" lines cause a match, the default is the +# opposite of the last line in the list. If the last line was +# deny, the default is allow. Conversely, if the last line +# is allow, the default will be deny. For these reasons, it is a +# good idea to have an "deny all" entry at the end of your access +# lists to avoid potential confusion. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +#Default: +# Deny, unless rules exist in squid.conf. +# + +# +# Recommended minimum Access Permission configuration: +# +# Deny requests to certain unsafe ports +http_access deny !Safe_ports + +# Deny CONNECT to other than secure SSL ports +http_access deny CONNECT !SSL_ports + +# Only allow cachemgr access from localhost +http_access allow localhost manager +http_access deny manager + +# We strongly recommend the following be uncommented to protect innocent +# web applications running on the proxy server who think the only +# one who can access services on "localhost" is a local user +#http_access deny to_localhost + +# +# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS +# + +# Example rule allowing access from your local networks. +# Adapt localnet in the ACL section to list your (internal) IP networks +# from where browsing should be allowed +http_access allow localnet +http_access allow localhost + +# And finally deny all other access to this proxy +http_access deny all + +# TAG: adapted_http_access +# Allowing or Denying access based on defined access lists +# +# Essentially identical to http_access, but runs after redirectors +# and ICAP/eCAP adaptation. Allowing access control based on their +# output. +# +# If not set then only http_access is used. +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: http_reply_access +# Allow replies to client requests. This is complementary to http_access. +# +# http_reply_access allow|deny [!] aclname ... +# +# NOTE: if there are no access lines present, the default is to allow +# all replies. +# +# If none of the access lines cause a match the opposite of the +# last line will apply. Thus it is good practice to end the rules +# with an "allow all" or "deny all" entry. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: icp_access +# Allowing or Denying access to the ICP port based on defined +# access lists +# +# icp_access allow|deny [!]aclname ... +# +# NOTE: The default if no icp_access lines are present is to +# deny all traffic. This default may cause problems with peers +# using ICP. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow ICP queries from local networks only +##icp_access allow localnet +##icp_access deny all +#Default: +# Deny, unless rules exist in squid.conf. + +# TAG: htcp_access +# Allowing or Denying access to the HTCP port based on defined +# access lists +# +# htcp_access allow|deny [!]aclname ... +# +# See also htcp_clr_access for details on access control for +# cache purge (CLR) HTCP messages. +# +# NOTE: The default if no htcp_access lines are present is to +# deny all traffic. This default may cause problems with peers +# using the htcp option. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow HTCP queries from local networks only +##htcp_access allow localnet +##htcp_access deny all +#Default: +# Deny, unless rules exist in squid.conf. + +# TAG: htcp_clr_access +# Allowing or Denying access to purge content using HTCP based +# on defined access lists. +# See htcp_access for details on general HTCP access control. +# +# htcp_clr_access allow|deny [!]aclname ... +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow HTCP CLR requests from trusted peers +#acl htcp_clr_peer src 192.0.2.2 2001:DB8::2 +#htcp_clr_access allow htcp_clr_peer +#htcp_clr_access deny all +#Default: +# Deny, unless rules exist in squid.conf. + +# TAG: miss_access +# Determines whether network access is permitted when satisfying a request. +# +# For example; +# to force your neighbors to use you as a sibling instead of +# a parent. +# +# acl localclients src 192.0.2.0/24 2001:DB8::a:0/64 +# miss_access deny !localclients +# miss_access allow all +# +# This means only your local clients are allowed to fetch relayed/MISS +# replies from the network and all other clients can only fetch cached +# objects (HITs). +# +# The default for this setting allows all clients who passed the +# http_access rules to relay via this proxy. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: ident_lookup_access +# A list of ACL elements which, if matched, cause an ident +# (RFC 931) lookup to be performed for this request. For +# example, you might choose to always perform ident lookups +# for your main multi-user Unix boxes, but not for your Macs +# and PCs. By default, ident lookups are not performed for +# any requests. +# +# To enable ident lookups for specific client addresses, you +# can follow this example: +# +# acl ident_aware_hosts src 198.168.1.0/24 +# ident_lookup_access allow ident_aware_hosts +# ident_lookup_access deny all +# +# Only src type ACL checks are fully supported. A srcdomain +# ACL might work at times, but it will not always provide +# the correct result. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Unless rules exist in squid.conf, IDENT is not fetched. + +# TAG: reply_body_max_size size [acl acl...] +# This option specifies the maximum size of a reply body. It can be +# used to prevent users from downloading very large files, such as +# MP3's and movies. When the reply headers are received, the +# reply_body_max_size lines are processed, and the first line where +# all (if any) listed ACLs are true is used as the maximum body size +# for this reply. +# +# This size is checked twice. First when we get the reply headers, +# we check the content-length value. If the content length value exists +# and is larger than the allowed size, the request is denied and the +# user receives an error message that says "the request or reply +# is too large." If there is no content-length, and the reply +# size exceeds this limit, the client's connection is just closed +# and they will receive a partial reply. +# +# WARNING: downstream caches probably can not detect a partial reply +# if there is no content-length header, so they will cache +# partial responses and give them out as hits. You should NOT +# use this option if you have downstream caches. +# +# WARNING: A maximum size smaller than the size of squid's error messages +# will cause an infinite loop and crash squid. Ensure that the smallest +# non-zero value you use is greater that the maximum header size plus +# the size of your largest error page. +# +# If you set this parameter none (the default), there will be +# no limit imposed. +# +# Configuration Format is: +# reply_body_max_size SIZE UNITS [acl ...] +# ie. +# reply_body_max_size 10 MB +# +#Default: +# No limit is applied. + +# NETWORK OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: http_port +# Usage: port [mode] [options] +# hostname:port [mode] [options] +# 1.2.3.4:port [mode] [options] +# +# The socket addresses where Squid will listen for HTTP client +# requests. You may specify multiple socket addresses. +# There are three forms: port alone, hostname with port, and +# IP address with port. If you specify a hostname or IP +# address, Squid binds the socket to that specific +# address. Most likely, you do not need to bind to a specific +# address, so you can use the port number alone. +# +# If you are running Squid in accelerator mode, you +# probably want to listen on port 80 also, or instead. +# +# The -a command line option may be used to specify additional +# port(s) where Squid listens for proxy request. Such ports will +# be plain proxy ports with no options. +# +# You may specify multiple socket addresses on multiple lines. +# +# Modes: +# +# intercept Support for IP-Layer NAT interception delivering +# traffic to this Squid port. +# NP: disables authentication on the port. +# +# tproxy Support Linux TPROXY (or BSD divert-to) with spoofing +# of outgoing connections using the client IP address. +# NP: disables authentication on the port. +# +# accel Accelerator / reverse proxy mode +# +# ssl-bump For each CONNECT request allowed by ssl_bump ACLs, +# establish secure connection with the client and with +# the server, decrypt HTTPS messages as they pass through +# Squid, and treat them as unencrypted HTTP messages, +# becoming the man-in-the-middle. +# +# The ssl_bump option is required to fully enable +# bumping of CONNECT requests. +# +# Omitting the mode flag causes default forward proxy mode to be used. +# +# +# Accelerator Mode Options: +# +# defaultsite=domainname +# What to use for the Host: header if it is not present +# in a request. Determines what site (not origin server) +# accelerators should consider the default. +# +# no-vhost Disable using HTTP/1.1 Host header for virtual domain support. +# +# protocol= Protocol to reconstruct accelerated and intercepted +# requests with. Defaults to HTTP/1.1 for http_port and +# HTTPS/1.1 for https_port. +# When an unsupported value is configured Squid will +# produce a FATAL error. +# Values: HTTP or HTTP/1.1, HTTPS or HTTPS/1.1 +# +# vport Virtual host port support. Using the http_port number +# instead of the port passed on Host: headers. +# +# vport=NN Virtual host port support. Using the specified port +# number instead of the port passed on Host: headers. +# +# act-as-origin +# Act as if this Squid is the origin server. +# This currently means generate new Date: and Expires: +# headers on HIT instead of adding Age:. +# +# ignore-cc Ignore request Cache-Control headers. +# +# WARNING: This option violates HTTP specifications if +# used in non-accelerator setups. +# +# allow-direct Allow direct forwarding in accelerator mode. Normally +# accelerated requests are denied direct forwarding as if +# never_direct was used. +# +# WARNING: this option opens accelerator mode to security +# vulnerabilities usually only affecting in interception +# mode. Make sure to protect forwarding with suitable +# http_access rules when using this. +# +# +# SSL Bump Mode Options: +# In addition to these options ssl-bump requires TLS/SSL options. +# +# generate-host-certificates[=] +# Dynamically create SSL server certificates for the +# destination hosts of bumped CONNECT requests.When +# enabled, the cert and key options are used to sign +# generated certificates. Otherwise generated +# certificate will be selfsigned. +# If there is a CA certificate lifetime of the generated +# certificate equals lifetime of the CA certificate. If +# generated certificate is selfsigned lifetime is three +# years. +# This option is disabled by default. See the ssl-bump +# option above for more information. +# +# dynamic_cert_mem_cache_size=SIZE +# Approximate total RAM size spent on cached generated +# certificates. If set to zero, caching is disabled. +# +# TLS / SSL Options: +# +# cert= Path to SSL certificate (PEM format). +# +# key= Path to SSL private key file (PEM format) +# if not specified, the certificate file is +# assumed to be a combined certificate and +# key file. +# +# version= The version of SSL/TLS supported +# 1 automatic (default) +# 2 SSLv2 only +# 3 SSLv3 only +# 4 TLSv1.0 only +# 5 TLSv1.1 only +# 6 TLSv1.2 only +# +# cipher= Colon separated list of supported ciphers. +# NOTE: some ciphers such as EDH ciphers depend on +# additional settings. If those settings are +# omitted the ciphers may be silently ignored +# by the OpenSSL library. +# +# options= Various SSL implementation options. The most important +# being: +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1.0 +# NO_TLSv1_1 Disallow the use of TLSv1.1 +# NO_TLSv1_2 Disallow the use of TLSv1.2 +# SINGLE_DH_USE Always create a new key when using +# temporary/ephemeral DH key exchanges +# NO_TICKET Disables TLS tickets extension +# +# SINGLE_ECDH_USE +# Enable ephemeral ECDH key exchange. +# The adopted curve should be specified +# using the tls-dh option. +# +# ALL Enable various bug workarounds +# suggested as "harmless" by OpenSSL +# Be warned that this reduces SSL/TLS +# strength to some attacks. +# See OpenSSL SSL_CTX_set_options documentation for a +# complete list of options. +# +# clientca= File containing the list of CAs to use when +# requesting a client certificate. +# +# cafile= File containing additional CA certificates to +# use when verifying client certificates. If unset +# clientca will be used. +# +# capath= Directory containing additional CA certificates +# and CRL lists to use when verifying client certificates. +# +# crlfile= File of additional CRL lists to use when verifying +# the client certificate, in addition to CRLs stored in +# the capath. Implies VERIFY_CRL flag below. +# +# tls-dh=[curve:]file +# File containing DH parameters for temporary/ephemeral DH key +# exchanges, optionally prefixed by a curve for ephemeral ECDH +# key exchanges. +# See OpenSSL documentation for details on how to create the +# DH parameter file. Supported curves for ECDH can be listed +# using the "openssl ecparam -list_curves" command. +# WARNING: EDH and EECDH ciphers will be silently disabled if +# this option is not set. +# +# sslflags= Various flags modifying the use of SSL: +# DELAYED_AUTH +# Don't request client certificates +# immediately, but wait until acl processing +# requires a certificate (not yet implemented). +# NO_DEFAULT_CA +# Don't use the default CA lists built in +# to OpenSSL. +# NO_SESSION_REUSE +# Don't allow for session reuse. Each connection +# will result in a new SSL session. +# VERIFY_CRL +# Verify CRL lists when accepting client +# certificates. +# VERIFY_CRL_ALL +# Verify CRL lists for all certificates in the +# client certificate chain. +# +# sslcontext= SSL session ID context identifier. +# +# Other Options: +# +# connection-auth[=on|off] +# use connection-auth=off to tell Squid to prevent +# forwarding Microsoft connection oriented authentication +# (NTLM, Negotiate and Kerberos) +# +# disable-pmtu-discovery= +# Control Path-MTU discovery usage: +# off lets OS decide on what to do (default). +# transparent disable PMTU discovery when transparent +# support is enabled. +# always disable always PMTU discovery. +# +# In many setups of transparently intercepting proxies +# Path-MTU discovery can not work on traffic towards the +# clients. This is the case when the intercepting device +# does not fully track connections and fails to forward +# ICMP must fragment messages to the cache server. If you +# have such setup and experience that certain clients +# sporadically hang or never complete requests set +# disable-pmtu-discovery option to 'transparent'. +# +# name= Specifies a internal name for the port. Defaults to +# the port specification (port or addr:port) +# +# tcpkeepalive[=idle,interval,timeout] +# Enable TCP keepalive probes of idle connections. +# In seconds; idle is the initial time before TCP starts +# probing the connection, interval how often to probe, and +# timeout the time before giving up. +# +# require-proxy-header +# Require PROXY protocol version 1 or 2 connections. +# The proxy_protocol_access is required to whitelist +# downstream proxies which can be trusted. +# +# If you run Squid on a dual-homed machine with an internal +# and an external interface we recommend you to specify the +# internal address:port in http_port. This way Squid will only be +# visible on the internal address. +# +# + +# Squid normally listens to port 3128 +http_port 3128 + +# TAG: https_port +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Usage: [ip:]port cert=certificate.pem [key=key.pem] [mode] [options...] +# +# The socket address where Squid will listen for client requests made +# over TLS or SSL connections. Commonly referred to as HTTPS. +# +# This is most useful for situations where you are running squid in +# accelerator mode and you want to do the SSL work at the accelerator level. +# +# You may specify multiple socket addresses on multiple lines, +# each with their own SSL certificate and/or options. +# +# Modes: +# +# accel Accelerator / reverse proxy mode +# +# intercept Support for IP-Layer interception of +# outgoing requests without browser settings. +# NP: disables authentication and IPv6 on the port. +# +# tproxy Support Linux TPROXY for spoofing outgoing +# connections using the client IP address. +# NP: disables authentication and maybe IPv6 on the port. +# +# ssl-bump For each intercepted connection allowed by ssl_bump +# ACLs, establish a secure connection with the client and with +# the server, decrypt HTTPS messages as they pass through +# Squid, and treat them as unencrypted HTTP messages, +# becoming the man-in-the-middle. +# +# An "ssl_bump server-first" match is required to +# fully enable bumping of intercepted SSL connections. +# +# Requires tproxy or intercept. +# +# Omitting the mode flag causes default forward proxy mode to be used. +# +# +# See http_port for a list of generic options +# +# +# SSL Options: +# +# cert= Path to SSL certificate (PEM format). +# +# key= Path to SSL private key file (PEM format) +# if not specified, the certificate file is +# assumed to be a combined certificate and +# key file. +# +# version= The version of SSL/TLS supported +# 1 automatic (default) +# 2 SSLv2 only +# 3 SSLv3 only +# 4 TLSv1 only +# +# cipher= Colon separated list of supported ciphers. +# +# options= Various SSL engine options. The most important +# being: +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1 +# +# SINGLE_DH_USE Always create a new key when using +# temporary/ephemeral DH key exchanges +# +# SINGLE_ECDH_USE +# Enable ephemeral ECDH key exchange. +# The adopted curve should be specified +# using the tls-dh option. +# +# See src/ssl_support.c or OpenSSL SSL_CTX_set_options +# documentation for a complete list of options. +# +# clientca= File containing the list of CAs to use when +# requesting a client certificate. +# +# cafile= File containing additional CA certificates to +# use when verifying client certificates. If unset +# clientca will be used. +# +# capath= Directory containing additional CA certificates +# and CRL lists to use when verifying client certificates. +# +# crlfile= File of additional CRL lists to use when verifying +# the client certificate, in addition to CRLs stored in +# the capath. Implies VERIFY_CRL flag below. +# +# tls-dh=[curve:]file +# File containing DH parameters for temporary/ephemeral DH key +# exchanges, optionally prefixed by a curve for ephemeral ECDH +# key exchanges. +# +# sslflags= Various flags modifying the use of SSL: +# DELAYED_AUTH +# Don't request client certificates +# immediately, but wait until acl processing +# requires a certificate (not yet implemented). +# NO_DEFAULT_CA +# Don't use the default CA lists built in +# to OpenSSL. +# NO_SESSION_REUSE +# Don't allow for session reuse. Each connection +# will result in a new SSL session. +# VERIFY_CRL +# Verify CRL lists when accepting client +# certificates. +# VERIFY_CRL_ALL +# Verify CRL lists for all certificates in the +# client certificate chain. +# +# sslcontext= SSL session ID context identifier. +# +# generate-host-certificates[=] +# Dynamically create SSL server certificates for the +# destination hosts of bumped SSL requests.When +# enabled, the cert and key options are used to sign +# generated certificates. Otherwise generated +# certificate will be selfsigned. +# If there is CA certificate life time of generated +# certificate equals lifetime of CA certificate. If +# generated certificate is selfsigned lifetime is three +# years. +# This option is disabled by default. See the ssl-bump +# option above for more information. +# +# dynamic_cert_mem_cache_size=SIZE +# Approximate total RAM size spent on cached generated +# certificates. If set to zero, caching is disabled. +# +# See http_port for a list of available options. +#Default: +# none + +# TAG: ftp_port +# Enables Native FTP proxy by specifying the socket address where Squid +# listens for FTP client requests. See http_port directive for various +# ways to specify the listening address and mode. +# +# Usage: ftp_port address [mode] [options] +# +# WARNING: This is a new, experimental, complex feature that has seen +# limited production exposure. Some Squid modules (e.g., caching) do not +# currently work with native FTP proxying, and many features have not +# even been tested for compatibility. Test well before deploying! +# +# Native FTP proxying differs substantially from proxying HTTP requests +# with ftp:// URIs because Squid works as an FTP server and receives +# actual FTP commands (rather than HTTP requests with FTP URLs). +# +# Native FTP commands accepted at ftp_port are internally converted or +# wrapped into HTTP-like messages. The same happens to Native FTP +# responses received from FTP origin servers. Those HTTP-like messages +# are shoveled through regular access control and adaptation layers +# between the FTP client and the FTP origin server. This allows Squid to +# examine, adapt, block, and log FTP exchanges. Squid reuses most HTTP +# mechanisms when shoveling wrapped FTP messages. For example, +# http_access and adaptation_access directives are used. +# +# Modes: +# +# intercept Same as http_port intercept. The FTP origin address is +# determined based on the intended destination of the +# intercepted connection. +# +# tproxy Support Linux TPROXY for spoofing outgoing +# connections using the client IP address. +# NP: disables authentication and maybe IPv6 on the port. +# +# By default (i.e., without an explicit mode option), Squid extracts the +# FTP origin address from the login@origin parameter of the FTP USER +# command. Many popular FTP clients support such native FTP proxying. +# +# Options: +# +# name=token Specifies an internal name for the port. Defaults to +# the port address. Usable with myportname ACL. +# +# ftp-track-dirs +# Enables tracking of FTP directories by injecting extra +# PWD commands and adjusting Request-URI (in wrapping +# HTTP requests) to reflect the current FTP server +# directory. Tracking is disabled by default. +# +# protocol=FTP Protocol to reconstruct accelerated and intercepted +# requests with. Defaults to FTP. No other accepted +# values have been tested with. An unsupported value +# results in a FATAL error. Accepted values are FTP, +# HTTP (or HTTP/1.1), and HTTPS (or HTTPS/1.1). +# +# Other http_port modes and options that are not specific to HTTP and +# HTTPS may also work. +#Default: +# none + +# TAG: tcp_outgoing_tos +# Allows you to select a TOS/Diffserv value for packets outgoing +# on the server side, based on an ACL. +# +# tcp_outgoing_tos ds-field [!]aclname ... +# +# Example where normal_service_net uses the TOS value 0x00 +# and good_service_net uses 0x20 +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.1.0/24 +# tcp_outgoing_tos 0x00 normal_service_net +# tcp_outgoing_tos 0x20 good_service_net +# +# TOS/DSCP values really only have local significance - so you should +# know what you're specifying. For more information, see RFC2474, +# RFC2475, and RFC3260. +# +# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or +# "default" to use whatever default your host has. +# Note that only multiples of 4 are usable as the two rightmost bits have +# been redefined for use by ECN (RFC 3168 section 23.1). +# The squid parser will enforce this by masking away the ECN bits. +# +# Processing proceeds in the order specified, and stops at first fully +# matching line. +# +# Only fast ACLs are supported. +#Default: +# none + +# TAG: clientside_tos +# Allows you to select a TOS/DSCP value for packets being transmitted +# on the client-side, based on an ACL. +# +# clientside_tos ds-field [!]aclname ... +# +# Example where normal_service_net uses the TOS value 0x00 +# and good_service_net uses 0x20 +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.1.0/24 +# clientside_tos 0x00 normal_service_net +# clientside_tos 0x20 good_service_net +# +# Note: This feature is incompatible with qos_flows. Any TOS values set here +# will be overwritten by TOS values in qos_flows. +# +# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or +# "default" to use whatever default your host has. +# Note that only multiples of 4 are usable as the two rightmost bits have +# been redefined for use by ECN (RFC 3168 section 23.1). +# The squid parser will enforce this by masking away the ECN bits. +# +#Default: +# none + +# TAG: tcp_outgoing_mark +# Note: This option is only available if Squid is rebuilt with the +# Packet MARK (Linux) +# +# Allows you to apply a Netfilter mark value to outgoing packets +# on the server side, based on an ACL. +# +# tcp_outgoing_mark mark-value [!]aclname ... +# +# Example where normal_service_net uses the mark value 0x00 +# and good_service_net uses 0x20 +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.1.0/24 +# tcp_outgoing_mark 0x00 normal_service_net +# tcp_outgoing_mark 0x20 good_service_net +# +# Only fast ACLs are supported. +#Default: +# none + +# TAG: clientside_mark +# Note: This option is only available if Squid is rebuilt with the +# Packet MARK (Linux) +# +# Allows you to apply a Netfilter mark value to packets being transmitted +# on the client-side, based on an ACL. +# +# clientside_mark mark-value [!]aclname ... +# +# Example where normal_service_net uses the mark value 0x00 +# and good_service_net uses 0x20 +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.1.0/24 +# clientside_mark 0x00 normal_service_net +# clientside_mark 0x20 good_service_net +# +# Note: This feature is incompatible with qos_flows. Any mark values set here +# will be overwritten by mark values in qos_flows. +#Default: +# none + +# TAG: qos_flows +# Allows you to select a TOS/DSCP value to mark outgoing +# connections to the client, based on where the reply was sourced. +# For platforms using netfilter, allows you to set a netfilter mark +# value instead of, or in addition to, a TOS value. +# +# By default this functionality is disabled. To enable it with the default +# settings simply use "qos_flows mark" or "qos_flows tos". Default +# settings will result in the netfilter mark or TOS value being copied +# from the upstream connection to the client. Note that it is the connection +# CONNMARK value not the packet MARK value that is copied. +# +# It is not currently possible to copy the mark or TOS value from the +# client to the upstream connection request. +# +# TOS values really only have local significance - so you should +# know what you're specifying. For more information, see RFC2474, +# RFC2475, and RFC3260. +# +# The TOS/DSCP byte must be exactly that - a octet value 0 - 255. +# Note that only multiples of 4 are usable as the two rightmost bits have +# been redefined for use by ECN (RFC 3168 section 23.1). +# The squid parser will enforce this by masking away the ECN bits. +# +# Mark values can be any unsigned 32-bit integer value. +# +# This setting is configured by setting the following values: +# +# tos|mark Whether to set TOS or netfilter mark values +# +# local-hit=0xFF Value to mark local cache hits. +# +# sibling-hit=0xFF Value to mark hits from sibling peers. +# +# parent-hit=0xFF Value to mark hits from parent peers. +# +# miss=0xFF[/mask] Value to mark cache misses. Takes precedence +# over the preserve-miss feature (see below), unless +# mask is specified, in which case only the bits +# specified in the mask are written. +# +# The TOS variant of the following features are only possible on Linux +# and require your kernel to be patched with the TOS preserving ZPH +# patch, available from http://zph.bratcheda.org +# No patch is needed to preserve the netfilter mark, which will work +# with all variants of netfilter. +# +# disable-preserve-miss +# This option disables the preservation of the TOS or netfilter +# mark. By default, the existing TOS or netfilter mark value of +# the response coming from the remote server will be retained +# and masked with miss-mark. +# NOTE: in the case of a netfilter mark, the mark must be set on +# the connection (using the CONNMARK target) not on the packet +# (MARK target). +# +# miss-mask=0xFF +# Allows you to mask certain bits in the TOS or mark value +# received from the remote server, before copying the value to +# the TOS sent towards clients. +# Default for tos: 0xFF (TOS from server is not changed). +# Default for mark: 0xFFFFFFFF (mark from server is not changed). +# +# All of these features require the --enable-zph-qos compilation flag +# (enabled by default). Netfilter marking also requires the +# libnetfilter_conntrack libraries (--with-netfilter-conntrack) and +# libcap 2.09+ (--with-libcap). +# +#Default: +# none + +# TAG: tcp_outgoing_address +# Allows you to map requests to different outgoing IP addresses +# based on the username or source address of the user making +# the request. +# +# tcp_outgoing_address ipaddr [[!]aclname] ... +# +# For example; +# Forwarding clients with dedicated IPs for certain subnets. +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.2.0/24 +# +# tcp_outgoing_address 2001:db8::c001 good_service_net +# tcp_outgoing_address 10.1.0.2 good_service_net +# +# tcp_outgoing_address 2001:db8::beef normal_service_net +# tcp_outgoing_address 10.1.0.1 normal_service_net +# +# tcp_outgoing_address 2001:db8::1 +# tcp_outgoing_address 10.1.0.3 +# +# Processing proceeds in the order specified, and stops at first fully +# matching line. +# +# Squid will add an implicit IP version test to each line. +# Requests going to IPv4 websites will use the outgoing 10.1.0.* addresses. +# Requests going to IPv6 websites will use the outgoing 2001:db8:* addresses. +# +# +# NOTE: The use of this directive using client dependent ACLs is +# incompatible with the use of server side persistent connections. To +# ensure correct results it is best to set server_persistent_connections +# to off when using this directive in such configurations. +# +# NOTE: The use of this directive to set a local IP on outgoing TCP links +# is incompatible with using TPROXY to set client IP out outbound TCP links. +# When needing to contact peers use the no-tproxy cache_peer option and the +# client_dst_passthru directive re-enable normal forwarding such as this. +# +#Default: +# Address selection is performed by the operating system. + +# TAG: host_verify_strict +# Regardless of this option setting, when dealing with intercepted +# traffic, Squid always verifies that the destination IP address matches +# the Host header domain or IP (called 'authority form URL'). +# +# This enforcement is performed to satisfy a MUST-level requirement in +# RFC 2616 section 14.23: "The Host field value MUST represent the naming +# authority of the origin server or gateway given by the original URL". +# +# When set to ON: +# Squid always responds with an HTTP 409 (Conflict) error +# page and logs a security warning if there is no match. +# +# Squid verifies that the destination IP address matches +# the Host header for forward-proxy and reverse-proxy traffic +# as well. For those traffic types, Squid also enables the +# following checks, comparing the corresponding Host header +# and Request-URI components: +# +# * The host names (domain or IP) must be identical, +# but valueless or missing Host header disables all checks. +# For the two host names to match, both must be either IP +# or FQDN. +# +# * Port numbers must be identical, but if a port is missing +# the scheme-default port is assumed. +# +# +# When set to OFF (the default): +# Squid allows suspicious requests to continue but logs a +# security warning and blocks caching of the response. +# +# * Forward-proxy traffic is not checked at all. +# +# * Reverse-proxy traffic is not checked at all. +# +# * Intercepted traffic which passes verification is handled +# according to client_dst_passthru. +# +# * Intercepted requests which fail verification are sent +# to the client original destination instead of DIRECT. +# This overrides 'client_dst_passthru off'. +# +# For now suspicious intercepted CONNECT requests are always +# responded to with an HTTP 409 (Conflict) error page. +# +# +# SECURITY NOTE: +# +# As described in CVE-2009-0801 when the Host: header alone is used +# to determine the destination of a request it becomes trivial for +# malicious scripts on remote websites to bypass browser same-origin +# security policy and sandboxing protections. +# +# The cause of this is that such applets are allowed to perform their +# own HTTP stack, in which case the same-origin policy of the browser +# sandbox only verifies that the applet tries to contact the same IP +# as from where it was loaded at the IP level. The Host: header may +# be different from the connected IP and approved origin. +# +#Default: +# host_verify_strict off + +# TAG: client_dst_passthru +# With NAT or TPROXY intercepted traffic Squid may pass the request +# directly to the original client destination IP or seek a faster +# source using the HTTP Host header. +# +# Using Host to locate alternative servers can provide faster +# connectivity with a range of failure recovery options. +# But can also lead to connectivity trouble when the client and +# server are attempting stateful interactions unaware of the proxy. +# +# This option (on by default) prevents alternative DNS entries being +# located to send intercepted traffic DIRECT to an origin server. +# The clients original destination IP and port will be used instead. +# +# Regardless of this option setting, when dealing with intercepted +# traffic Squid will verify the Host: header and any traffic which +# fails Host verification will be treated as if this option were ON. +# +# see host_verify_strict for details on the verification process. +#Default: +# client_dst_passthru on + +# SSL OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: ssl_unclean_shutdown +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Some browsers (especially MSIE) bugs out on SSL shutdown +# messages. +#Default: +# ssl_unclean_shutdown off + +# TAG: ssl_engine +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# The OpenSSL engine to use. You will need to set this if you +# would like to use hardware SSL acceleration for example. +#Default: +# none + +# TAG: sslproxy_client_certificate +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Client SSL Certificate to use when proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_client_key +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Client SSL Key to use when proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_version +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# SSL version level to use when proxying https:// URLs +# +# The versions of SSL/TLS supported: +# +# 1 automatic (default) +# 2 SSLv2 only +# 3 SSLv3 only +# 4 TLSv1.0 only +# 5 TLSv1.1 only +# 6 TLSv1.2 only +#Default: +# automatic SSL/TLS version negotiation + +# TAG: sslproxy_options +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Colon (:) or comma (,) separated list of SSL implementation options +# to use when proxying https:// URLs +# +# The most important being: +# +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1.0 +# NO_TLSv1_1 Disallow the use of TLSv1.1 +# NO_TLSv1_2 Disallow the use of TLSv1.2 +# +# SINGLE_DH_USE +# Always create a new key when using temporary/ephemeral +# DH key exchanges +# +# NO_TICKET +# Disable use of RFC5077 session tickets. Some servers +# may have problems understanding the TLS extension due +# to ambiguous specification in RFC4507. +# +# ALL Enable various bug workarounds suggested as "harmless" +# by OpenSSL. Be warned that this may reduce SSL/TLS +# strength to some attacks. +# +# See the OpenSSL SSL_CTX_set_options documentation for a +# complete list of possible options. +# +# WARNING: This directive takes a single token. If a space is used +# the value(s) after that space are SILENTLY IGNORED. +#Default: +# none + +# TAG: sslproxy_cipher +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# SSL cipher list to use when proxying https:// URLs +# +# Colon separated list of supported ciphers. +#Default: +# none + +# TAG: sslproxy_cafile +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# file containing CA certificates to use when verifying server +# certificates while proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_capath +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# directory containing CA certificates to use when verifying +# server certificates while proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_session_ttl +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Sets the timeout value for SSL sessions +#Default: +# sslproxy_session_ttl 300 + +# TAG: sslproxy_session_cache_size +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Sets the cache size to use for ssl session +#Default: +# sslproxy_session_cache_size 2 MB + +# TAG: sslproxy_foreign_intermediate_certs +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Many origin servers fail to send their full server certificate +# chain for verification, assuming the client already has or can +# easily locate any missing intermediate certificates. +# +# Squid uses the certificates from the specified file to fill in +# these missing chains when trying to validate origin server +# certificate chains. +# +# The file is expected to contain zero or more PEM-encoded +# intermediate certificates. These certificates are not treated +# as trusted root certificates, and any self-signed certificate in +# this file will be ignored. +#Default: +# none + +# TAG: sslproxy_cert_sign_hash +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Sets the hashing algorithm to use when signing generated certificates. +# Valid algorithm names depend on the OpenSSL library used. The following +# names are usually available: sha1, sha256, sha512, and md5. Please see +# your OpenSSL library manual for the available hashes. By default, Squids +# that support this option use sha256 hashes. +# +# Squid does not forcefully purge cached certificates that were generated +# with an algorithm other than the currently configured one. They remain +# in the cache, subject to the regular cache eviction policy, and become +# useful if the algorithm changes again. +#Default: +# none + +# TAG: ssl_bump +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# This option is consulted when a CONNECT request is received on +# an http_port (or a new connection is intercepted at an +# https_port), provided that port was configured with an ssl-bump +# flag. The subsequent data on the connection is either treated as +# HTTPS and decrypted OR tunneled at TCP level without decryption, +# depending on the first matching bumping "action". +# +# ssl_bump [!]acl ... +# +# The following bumping actions are currently supported: +# +# splice +# Become a TCP tunnel without decrypting proxied traffic. +# This is the default action. +# +# bump +# When used on step SslBump1, establishes a secure connection +# with the client first, then connect to the server. +# When used on step SslBump2 or SslBump3, establishes a secure +# connection with the server and, using a mimicked server +# certificate, with the client. +# +# peek +# Receive client (step SslBump1) or server (step SslBump2) +# certificate while preserving the possibility of splicing the +# connection. Peeking at the server certificate (during step 2) +# usually precludes bumping of the connection at step 3. +# +# stare +# Receive client (step SslBump1) or server (step SslBump2) +# certificate while preserving the possibility of bumping the +# connection. Staring at the server certificate (during step 2) +# usually precludes splicing of the connection at step 3. +# +# terminate +# Close client and server connections. +# +# Backward compatibility actions available at step SslBump1: +# +# client-first +# Bump the connection. Establish a secure connection with the +# client first, then connect to the server. This old mode does +# not allow Squid to mimic server SSL certificate and does not +# work with intercepted SSL connections. +# +# server-first +# Bump the connection. Establish a secure connection with the +# server first, then establish a secure connection with the +# client, using a mimicked server certificate. Works with both +# CONNECT requests and intercepted SSL connections, but does +# not allow to make decisions based on SSL handshake info. +# +# peek-and-splice +# Decide whether to bump or splice the connection based on +# client-to-squid and server-to-squid SSL hello messages. +# XXX: Remove. +# +# none +# Same as the "splice" action. +# +# All ssl_bump rules are evaluated at each of the supported bumping +# steps. Rules with actions that are impossible at the current step are +# ignored. The first matching ssl_bump action wins and is applied at the +# end of the current step. If no rules match, the splice action is used. +# See the at_step ACL for a list of the supported SslBump steps. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# See also: http_port ssl-bump, https_port ssl-bump, and acl at_step. +# +# +# # Example: Bump all TLS connections except those originating from +# # localhost or those going to example.com. +# +# acl broken_sites ssl::server_name .example.com +# ssl_bump splice localhost +# ssl_bump splice broken_sites +# ssl_bump bump all +#Default: +# Become a TCP tunnel without decrypting proxied traffic. + +# TAG: sslproxy_flags +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Various flags modifying the use of SSL while proxying https:// URLs: +# DONT_VERIFY_PEER Accept certificates that fail verification. +# For refined control, see sslproxy_cert_error. +# NO_DEFAULT_CA Don't use the default CA list built in +# to OpenSSL. +#Default: +# none + +# TAG: sslproxy_cert_error +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Use this ACL to bypass server certificate validation errors. +# +# For example, the following lines will bypass all validation errors +# when talking to servers for example.com. All other +# validation errors will result in ERR_SECURE_CONNECT_FAIL error. +# +# acl BrokenButTrustedServers dstdomain example.com +# sslproxy_cert_error allow BrokenButTrustedServers +# sslproxy_cert_error deny all +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# Using slow acl types may result in server crashes +# +# Without this option, all server certificate validation errors +# terminate the transaction to protect Squid and the client. +# +# SQUID_X509_V_ERR_INFINITE_VALIDATION error cannot be bypassed +# but should not happen unless your OpenSSL library is buggy. +# +# SECURITY WARNING: +# Bypassing validation errors is dangerous because an +# error usually implies that the server cannot be trusted +# and the connection may be insecure. +# +# See also: sslproxy_flags and DONT_VERIFY_PEER. +#Default: +# Server certificate errors terminate the transaction. + +# TAG: sslproxy_cert_sign +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# +# sslproxy_cert_sign acl ... +# +# The following certificate signing algorithms are supported: +# +# signTrusted +# Sign using the configured CA certificate which is usually +# placed in and trusted by end-user browsers. This is the +# default for trusted origin server certificates. +# +# signUntrusted +# Sign to guarantee an X509_V_ERR_CERT_UNTRUSTED browser error. +# This is the default for untrusted origin server certificates +# that are not self-signed (see ssl::certUntrusted). +# +# signSelf +# Sign using a self-signed certificate with the right CN to +# generate a X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT error in the +# browser. This is the default for self-signed origin server +# certificates (see ssl::certSelfSigned). +# +# This clause only supports fast acl types. +# +# When sslproxy_cert_sign acl(s) match, Squid uses the corresponding +# signing algorithm to generate the certificate and ignores all +# subsequent sslproxy_cert_sign options (the first match wins). If no +# acl(s) match, the default signing algorithm is determined by errors +# detected when obtaining and validating the origin server certificate. +# +# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can +# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a +# CONNECT request that carries a domain name. In all other cases (CONNECT +# to an IP address or an intercepted SSL connection), Squid cannot detect +# the domain mismatch at certificate generation time when +# bump-server-first is used. +#Default: +# none + +# TAG: sslproxy_cert_adapt +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# +# sslproxy_cert_adapt acl ... +# +# The following certificate adaptation algorithms are supported: +# +# setValidAfter +# Sets the "Not After" property to the "Not After" property of +# the CA certificate used to sign generated certificates. +# +# setValidBefore +# Sets the "Not Before" property to the "Not Before" property of +# the CA certificate used to sign generated certificates. +# +# setCommonName or setCommonName{CN} +# Sets Subject.CN property to the host name specified as a +# CN parameter or, if no explicit CN parameter was specified, +# extracted from the CONNECT request. It is a misconfiguration +# to use setCommonName without an explicit parameter for +# intercepted or tproxied SSL connections. +# +# This clause only supports fast acl types. +# +# Squid first groups sslproxy_cert_adapt options by adaptation algorithm. +# Within a group, when sslproxy_cert_adapt acl(s) match, Squid uses the +# corresponding adaptation algorithm to generate the certificate and +# ignores all subsequent sslproxy_cert_adapt options in that algorithm's +# group (i.e., the first match wins within each algorithm group). If no +# acl(s) match, the default mimicking action takes place. +# +# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can +# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a +# CONNECT request that carries a domain name. In all other cases (CONNECT +# to an IP address or an intercepted SSL connection), Squid cannot detect +# the domain mismatch at certificate generation time when +# bump-server-first is used. +#Default: +# none + +# TAG: sslpassword_program +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Specify a program used for entering SSL key passphrases +# when using encrypted SSL certificate keys. If not specified +# keys must either be unencrypted, or Squid started with the -N +# option to allow it to query interactively for the passphrase. +# +# The key file name is given as argument to the program allowing +# selection of the right password if you have multiple encrypted +# keys. +#Default: +# none + +# OPTIONS RELATING TO EXTERNAL SSL_CRTD +# ----------------------------------------------------------------------------- + +# TAG: sslcrtd_program +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl-crtd +# +# Specify the location and options of the executable for ssl_crtd process. +# /usr/lib/squid/ssl_crtd program requires -s and -M parameters +# For more information use: +# /usr/lib/squid/ssl_crtd -h +#Default: +# sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/lib/ssl_db -M 4MB + +# TAG: sslcrtd_children +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl-crtd +# +# The maximum number of processes spawn to service ssl server. +# The maximum this may be safely set to is 32. +# +# The startup= and idle= options allow some measure of skew in your +# tuning. +# +# startup=N +# +# Sets the minimum number of processes to spawn when Squid +# starts or reconfigures. When set to zero the first request will +# cause spawning of the first child process to handle it. +# +# Starting too few children temporary slows Squid under load while it +# tries to spawn enough additional processes to cope with traffic. +# +# idle=N +# +# Sets a minimum of how many processes Squid is to try and keep available +# at all times. When traffic begins to rise above what the existing +# processes can handle this many more will be spawned up to the maximum +# configured. A minimum setting of 1 is required. +# +# You must have at least one ssl_crtd process. +#Default: +# sslcrtd_children 32 startup=5 idle=1 + +# TAG: sslcrtvalidator_program +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# Specify the location and options of the executable for ssl_crt_validator +# process. +# +# Usage: sslcrtvalidator_program [ttl=n] [cache=n] path ... +# +# Options: +# ttl=n TTL in seconds for cached results. The default is 60 secs +# cache=n limit the result cache size. The default value is 2048 +#Default: +# none + +# TAG: sslcrtvalidator_children +# Note: This option is only available if Squid is rebuilt with the +# --with-openssl +# +# The maximum number of processes spawn to service SSL server. +# The maximum this may be safely set to is 32. +# +# The startup= and idle= options allow some measure of skew in your +# tuning. +# +# startup=N +# +# Sets the minimum number of processes to spawn when Squid +# starts or reconfigures. When set to zero the first request will +# cause spawning of the first child process to handle it. +# +# Starting too few children temporary slows Squid under load while it +# tries to spawn enough additional processes to cope with traffic. +# +# idle=N +# +# Sets a minimum of how many processes Squid is to try and keep available +# at all times. When traffic begins to rise above what the existing +# processes can handle this many more will be spawned up to the maximum +# configured. A minimum setting of 1 is required. +# +# concurrency= +# +# The number of requests each certificate validator helper can handle in +# parallel. A value of 0 indicates the certficate validator does not +# support concurrency. Defaults to 1. +# +# When this directive is set to a value >= 1 then the protocol +# used to communicate with the helper is modified to include +# a request ID in front of the request/response. The request +# ID from the request must be echoed back with the response +# to that request. +# +# You must have at least one ssl_crt_validator process. +#Default: +# sslcrtvalidator_children 32 startup=5 idle=1 concurrency=1 + +# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM +# ----------------------------------------------------------------------------- + +# TAG: cache_peer +# To specify other caches in a hierarchy, use the format: +# +# cache_peer hostname type http-port icp-port [options] +# +# For example, +# +# # proxy icp +# # hostname type port port options +# # -------------------- -------- ----- ----- ----------- +# cache_peer parent.foo.net parent 3128 3130 default +# cache_peer sib1.foo.net sibling 3128 3130 proxy-only +# cache_peer sib2.foo.net sibling 3128 3130 proxy-only +# cache_peer example.com parent 80 0 default +# cache_peer cdn.example.com sibling 3128 0 +# +# type: either 'parent', 'sibling', or 'multicast'. +# +# proxy-port: The port number where the peer accept HTTP requests. +# For other Squid proxies this is usually 3128 +# For web servers this is usually 80 +# +# icp-port: Used for querying neighbor caches about objects. +# Set to 0 if the peer does not support ICP or HTCP. +# See ICP and HTCP options below for additional details. +# +# +# ==== ICP OPTIONS ==== +# +# You MUST also set icp_port and icp_access explicitly when using these options. +# The defaults will prevent peer traffic using ICP. +# +# +# no-query Disable ICP queries to this neighbor. +# +# multicast-responder +# Indicates the named peer is a member of a multicast group. +# ICP queries will not be sent directly to the peer, but ICP +# replies will be accepted from it. +# +# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward +# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes. +# +# background-ping +# To only send ICP queries to this neighbor infrequently. +# This is used to keep the neighbor round trip time updated +# and is usually used in conjunction with weighted-round-robin. +# +# +# ==== HTCP OPTIONS ==== +# +# You MUST also set htcp_port and htcp_access explicitly when using these options. +# The defaults will prevent peer traffic using HTCP. +# +# +# htcp Send HTCP, instead of ICP, queries to the neighbor. +# You probably also want to set the "icp-port" to 4827 +# instead of 3130. This directive accepts a comma separated +# list of options described below. +# +# htcp=oldsquid Send HTCP to old Squid versions (2.5 or earlier). +# +# htcp=no-clr Send HTCP to the neighbor but without +# sending any CLR requests. This cannot be used with +# only-clr. +# +# htcp=only-clr Send HTCP to the neighbor but ONLY CLR requests. +# This cannot be used with no-clr. +# +# htcp=no-purge-clr +# Send HTCP to the neighbor including CLRs but only when +# they do not result from PURGE requests. +# +# htcp=forward-clr +# Forward any HTCP CLR requests this proxy receives to the peer. +# +# +# ==== PEER SELECTION METHODS ==== +# +# The default peer selection method is ICP, with the first responding peer +# being used as source. These options can be used for better load balancing. +# +# +# default This is a parent cache which can be used as a "last-resort" +# if a peer cannot be located by any of the peer-selection methods. +# If specified more than once, only the first is used. +# +# round-robin Load-Balance parents which should be used in a round-robin +# fashion in the absence of any ICP queries. +# weight=N can be used to add bias. +# +# weighted-round-robin +# Load-Balance parents which should be used in a round-robin +# fashion with the frequency of each parent being based on the +# round trip time. Closer parents are used more often. +# Usually used for background-ping parents. +# weight=N can be used to add bias. +# +# carp Load-Balance parents which should be used as a CARP array. +# The requests will be distributed among the parents based on the +# CARP load balancing hash function based on their weight. +# +# userhash Load-balance parents based on the client proxy_auth or ident username. +# +# sourcehash Load-balance parents based on the client source IP. +# +# multicast-siblings +# To be used only for cache peers of type "multicast". +# ALL members of this multicast group have "sibling" +# relationship with it, not "parent". This is to a multicast +# group when the requested object would be fetched only from +# a "parent" cache, anyway. It's useful, e.g., when +# configuring a pool of redundant Squid proxies, being +# members of the same multicast group. +# +# +# ==== PEER SELECTION OPTIONS ==== +# +# weight=N use to affect the selection of a peer during any weighted +# peer-selection mechanisms. +# The weight must be an integer; default is 1, +# larger weights are favored more. +# This option does not affect parent selection if a peering +# protocol is not in use. +# +# basetime=N Specify a base amount to be subtracted from round trip +# times of parents. +# It is subtracted before division by weight in calculating +# which parent to fectch from. If the rtt is less than the +# base time the rtt is set to a minimal value. +# +# ttl=N Specify a TTL to use when sending multicast ICP queries +# to this address. +# Only useful when sending to a multicast group. +# Because we don't accept ICP replies from random +# hosts, you must configure other group members as +# peers with the 'multicast-responder' option. +# +# no-delay To prevent access to this neighbor from influencing the +# delay pools. +# +# digest-url=URL Tell Squid to fetch the cache digest (if digests are +# enabled) for this host from the specified URL rather +# than the Squid default location. +# +# +# ==== CARP OPTIONS ==== +# +# carp-key=key-specification +# use a different key than the full URL to hash against the peer. +# the key-specification is a comma-separated list of the keywords +# scheme, host, port, path, params +# Order is not important. +# +# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ==== +# +# originserver Causes this parent to be contacted as an origin server. +# Meant to be used in accelerator setups when the peer +# is a web server. +# +# forceddomain=name +# Set the Host header of requests forwarded to this peer. +# Useful in accelerator setups where the server (peer) +# expects a certain domain name but clients may request +# others. ie example.com or www.example.com +# +# no-digest Disable request of cache digests. +# +# no-netdb-exchange +# Disables requesting ICMP RTT database (NetDB). +# +# +# ==== AUTHENTICATION OPTIONS ==== +# +# login=user:password +# If this is a personal/workgroup proxy and your parent +# requires proxy authentication. +# +# Note: The string can include URL escapes (i.e. %20 for +# spaces). This also means % must be written as %%. +# +# login=PASSTHRU +# Send login details received from client to this peer. +# Both Proxy- and WWW-Authorization headers are passed +# without alteration to the peer. +# Authentication is not required by Squid for this to work. +# +# Note: This will pass any form of authentication but +# only Basic auth will work through a proxy unless the +# connection-auth options are also used. +# +# login=PASS Send login details received from client to this peer. +# Authentication is not required by this option. +# +# If there are no client-provided authentication headers +# to pass on, but username and password are available +# from an external ACL user= and password= result tags +# they may be sent instead. +# +# Note: To combine this with proxy_auth both proxies must +# share the same user database as HTTP only allows for +# a single login (one for proxy, one for origin server). +# Also be warned this will expose your users proxy +# password to the peer. USE WITH CAUTION +# +# login=*:password +# Send the username to the upstream cache, but with a +# fixed password. This is meant to be used when the peer +# is in another administrative domain, but it is still +# needed to identify each user. +# The star can optionally be followed by some extra +# information which is added to the username. This can +# be used to identify this proxy to the peer, similar to +# the login=username:password option above. +# +# login=NEGOTIATE +# If this is a personal/workgroup proxy and your parent +# requires a secure proxy authentication. +# The first principal from the default keytab or defined by +# the environment variable KRB5_KTNAME will be used. +# +# WARNING: The connection may transmit requests from multiple +# clients. Negotiate often assumes end-to-end authentication +# and a single-client. Which is not strictly true here. +# +# login=NEGOTIATE:principal_name +# If this is a personal/workgroup proxy and your parent +# requires a secure proxy authentication. +# The principal principal_name from the default keytab or +# defined by the environment variable KRB5_KTNAME will be +# used. +# +# WARNING: The connection may transmit requests from multiple +# clients. Negotiate often assumes end-to-end authentication +# and a single-client. Which is not strictly true here. +# +# connection-auth=on|off +# Tell Squid that this peer does or not support Microsoft +# connection oriented authentication, and any such +# challenges received from there should be ignored. +# Default is auto to automatically determine the status +# of the peer. +# +# +# ==== SSL / HTTPS / TLS OPTIONS ==== +# +# ssl Encrypt connections to this peer with SSL/TLS. +# +# sslcert=/path/to/ssl/certificate +# A client SSL certificate to use when connecting to +# this peer. +# +# sslkey=/path/to/ssl/key +# The private SSL key corresponding to sslcert above. +# If 'sslkey' is not specified 'sslcert' is assumed to +# reference a combined file containing both the +# certificate and the key. +# +# Notes: +# +# On Debian/Ubuntu systems a default snakeoil certificate is +# available in /etc/ssl and users can set: +# +# cert=/etc/ssl/certs/ssl-cert-snakeoil.pem +# +# and +# +# key=/etc/ssl/private/ssl-cert-snakeoil.key +# +# for testing. +# +# sslversion=1|2|3|4|5|6 +# The SSL version to use when connecting to this peer +# 1 = automatic (default) +# 2 = SSL v2 only +# 3 = SSL v3 only +# 4 = TLS v1.0 only +# 5 = TLS v1.1 only +# 6 = TLS v1.2 only +# +# sslcipher=... The list of valid SSL ciphers to use when connecting +# to this peer. +# +# ssloptions=... Specify various SSL implementation options: +# +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1.0 +# NO_TLSv1_1 Disallow the use of TLSv1.1 +# NO_TLSv1_2 Disallow the use of TLSv1.2 +# +# SINGLE_DH_USE +# Always create a new key when using +# temporary/ephemeral DH key exchanges +# +# NO_TICKET +# Disable use of RFC5077 session tickets. Some servers +# may have problems understanding the TLS extension due +# to ambiguous specification in RFC4507. +# +# ALL Enable various bug workarounds +# suggested as "harmless" by OpenSSL +# Be warned that this reduces SSL/TLS +# strength to some attacks. +# +# See the OpenSSL SSL_CTX_set_options documentation for a +# more complete list. +# +# sslcafile=... A file containing additional CA certificates to use +# when verifying the peer certificate. +# +# sslcapath=... A directory containing additional CA certificates to +# use when verifying the peer certificate. +# +# sslcrlfile=... A certificate revocation list file to use when +# verifying the peer certificate. +# +# sslflags=... Specify various flags modifying the SSL implementation: +# +# DONT_VERIFY_PEER +# Accept certificates even if they fail to +# verify. +# NO_DEFAULT_CA +# Don't use the default CA list built in +# to OpenSSL. +# DONT_VERIFY_DOMAIN +# Don't verify the peer certificate +# matches the server name +# +# ssldomain= The peer name as advertised in it's certificate. +# Used for verifying the correctness of the received peer +# certificate. If not specified the peer hostname will be +# used. +# +# front-end-https +# Enable the "Front-End-Https: On" header needed when +# using Squid as a SSL frontend in front of Microsoft OWA. +# See MS KB document Q307347 for details on this header. +# If set to auto the header will only be added if the +# request is forwarded as a https:// URL. +# +# +# ==== GENERAL OPTIONS ==== +# +# connect-timeout=N +# A peer-specific connect timeout. +# Also see the peer_connect_timeout directive. +# +# connect-fail-limit=N +# How many times connecting to a peer must fail before +# it is marked as down. Standby connection failures +# count towards this limit. Default is 10. +# +# allow-miss Disable Squid's use of only-if-cached when forwarding +# requests to siblings. This is primarily useful when +# icp_hit_stale is used by the sibling. Excessive use +# of this option may result in forwarding loops. One way +# to prevent peering loops when using this option, is to +# deny cache peer usage on requests from a peer: +# acl fromPeer ... +# cache_peer_access peerName deny fromPeer +# +# max-conn=N Limit the number of concurrent connections the Squid +# may open to this peer, including already opened idle +# and standby connections. There is no peer-specific +# connection limit by default. +# +# A peer exceeding the limit is not used for new +# requests unless a standby connection is available. +# +# max-conn currently works poorly with idle persistent +# connections: When a peer reaches its max-conn limit, +# and there are idle persistent connections to the peer, +# the peer may not be selected because the limiting code +# does not know whether Squid can reuse those idle +# connections. +# +# standby=N Maintain a pool of N "hot standby" connections to an +# UP peer, available for requests when no idle +# persistent connection is available (or safe) to use. +# By default and with zero N, no such pool is maintained. +# N must not exceed the max-conn limit (if any). +# +# At start or after reconfiguration, Squid opens new TCP +# standby connections until there are N connections +# available and then replenishes the standby pool as +# opened connections are used up for requests. A used +# connection never goes back to the standby pool, but +# may go to the regular idle persistent connection pool +# shared by all peers and origin servers. +# +# Squid never opens multiple new standby connections +# concurrently. This one-at-a-time approach minimizes +# flooding-like effect on peers. Furthermore, just a few +# standby connections should be sufficient in most cases +# to supply most new requests with a ready-to-use +# connection. +# +# Standby connections obey server_idle_pconn_timeout. +# For the feature to work as intended, the peer must be +# configured to accept and keep them open longer than +# the idle timeout at the connecting Squid, to minimize +# race conditions typical to idle used persistent +# connections. Default request_timeout and +# server_idle_pconn_timeout values ensure such a +# configuration. +# +# name=xxx Unique name for the peer. +# Required if you have multiple peers on the same host +# but different ports. +# This name can be used in cache_peer_access and similar +# directives to identify the peer. +# Can be used by outgoing access controls through the +# peername ACL type. +# +# no-tproxy Do not use the client-spoof TPROXY support when forwarding +# requests to this peer. Use normal address selection instead. +# This overrides the spoof_client_ip ACL. +# +# proxy-only objects fetched from the peer will not be stored locally. +# +#Default: +# none + +# TAG: cache_peer_domain +# Use to limit the domains for which a neighbor cache will be +# queried. +# +# Usage: +# cache_peer_domain cache-host domain [domain ...] +# cache_peer_domain cache-host !domain +# +# For example, specifying +# +# cache_peer_domain parent.foo.net .edu +# +# has the effect such that UDP query packets are sent to +# 'bigserver' only when the requested object exists on a +# server in the .edu domain. Prefixing the domainname +# with '!' means the cache will be queried for objects +# NOT in that domain. +# +# NOTE: * Any number of domains may be given for a cache-host, +# either on the same or separate lines. +# * When multiple domains are given for a particular +# cache-host, the first matched domain is applied. +# * Cache hosts with no domain restrictions are queried +# for all requests. +# * There are no defaults. +# * There is also a 'cache_peer_access' tag in the ACL +# section. +#Default: +# none + +# TAG: cache_peer_access +# Restricts usage of cache_peer proxies. +# +# Usage: +# cache_peer_access peer-name allow|deny [!]aclname ... +# +# For the required peer-name parameter, use either the value of the +# cache_peer name=value parameter or, if name=value is missing, the +# cache_peer hostname parameter. +# +# This directive narrows down the selection of peering candidates, but +# does not determine the order in which the selected candidates are +# contacted. That order is determined by the peer selection algorithms +# (see PEER SELECTION sections in the cache_peer documentation). +# +# If a deny rule matches, the corresponding peer will not be contacted +# for the current transaction -- Squid will not send ICP queries and +# will not forward HTTP requests to that peer. An allow match leaves +# the corresponding peer in the selection. The first match for a given +# peer wins for that peer. +# +# The relative order of cache_peer_access directives for the same peer +# matters. The relative order of any two cache_peer_access directives +# for different peers does not matter. To ease interpretation, it is a +# good idea to group cache_peer_access directives for the same peer +# together. +# +# A single cache_peer_access directive may be evaluated multiple times +# for a given transaction because individual peer selection algorithms +# may check it independently from each other. These redundant checks +# may be optimized away in future Squid versions. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# No peer usage restrictions. + +# TAG: neighbor_type_domain +# Modify the cache_peer neighbor type when passing requests +# about specific domains to the peer. +# +# Usage: +# neighbor_type_domain neighbor parent|sibling domain domain ... +# +# For example: +# cache_peer foo.example.com parent 3128 3130 +# neighbor_type_domain foo.example.com sibling .au .de +# +# The above configuration treats all requests to foo.example.com as a +# parent proxy unless the request is for a .au or .de ccTLD domain name. +#Default: +# The peer type from cache_peer directive is used for all requests to that peer. + +# TAG: dead_peer_timeout (seconds) +# This controls how long Squid waits to declare a peer cache +# as "dead." If there are no ICP replies received in this +# amount of time, Squid will declare the peer dead and not +# expect to receive any further ICP replies. However, it +# continues to send ICP queries, and will mark the peer as +# alive upon receipt of the first subsequent ICP reply. +# +# This timeout also affects when Squid expects to receive ICP +# replies from peers. If more than 'dead_peer' seconds have +# passed since the last ICP reply was received, Squid will not +# expect to receive an ICP reply on the next query. Thus, if +# your time between requests is greater than this timeout, you +# will see a lot of requests sent DIRECT to origin servers +# instead of to your parents. +#Default: +# dead_peer_timeout 10 seconds + +# TAG: forward_max_tries +# Controls how many different forward paths Squid will try +# before giving up. See also forward_timeout. +# +# NOTE: connect_retries (default: none) can make each of these +# possible forwarding paths be tried multiple times. +#Default: +# forward_max_tries 25 + +# MEMORY CACHE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: cache_mem (bytes) +# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE. +# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL +# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER +# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS. +# +# 'cache_mem' specifies the ideal amount of memory to be used +# for: +# * In-Transit objects +# * Hot Objects +# * Negative-Cached objects +# +# Data for these objects are stored in 4 KB blocks. This +# parameter specifies the ideal upper limit on the total size of +# 4 KB blocks allocated. In-Transit objects take the highest +# priority. +# +# In-transit objects have priority over the others. When +# additional space is needed for incoming data, negative-cached +# and hot objects will be released. In other words, the +# negative-cached and hot objects will fill up any unused space +# not needed for in-transit objects. +# +# If circumstances require, this limit will be exceeded. +# Specifically, if your incoming request rate requires more than +# 'cache_mem' of memory to hold in-transit objects, Squid will +# exceed this limit to satisfy the new requests. When the load +# decreases, blocks will be freed until the high-water mark is +# reached. Thereafter, blocks will be used to store hot +# objects. +# +# If shared memory caching is enabled, Squid does not use the shared +# cache space for in-transit objects, but they still consume as much +# local memory as they need. For more details about the shared memory +# cache, see memory_cache_shared. +#Default: +# cache_mem 256 MB + +# TAG: maximum_object_size_in_memory (bytes) +# Objects greater than this size will not be attempted to kept in +# the memory cache. This should be set high enough to keep objects +# accessed frequently in memory to improve performance whilst low +# enough to keep larger objects from hoarding cache_mem. +#Default: +# maximum_object_size_in_memory 512 KB + +# TAG: memory_cache_shared on|off +# Controls whether the memory cache is shared among SMP workers. +# +# The shared memory cache is meant to occupy cache_mem bytes and replace +# the non-shared memory cache, although some entities may still be +# cached locally by workers for now (e.g., internal and in-transit +# objects may be served from a local memory cache even if shared memory +# caching is enabled). +# +# By default, the memory cache is shared if and only if all of the +# following conditions are satisfied: Squid runs in SMP mode with +# multiple workers, cache_mem is positive, and Squid environment +# supports required IPC primitives (e.g., POSIX shared memory segments +# and GCC-style atomic operations). +# +# To avoid blocking locks, shared memory uses opportunistic algorithms +# that do not guarantee that every cachable entity that could have been +# shared among SMP workers will actually be shared. +#Default: +# "on" where supported if doing memory caching with multiple SMP workers. + +# TAG: memory_cache_mode +# Controls which objects to keep in the memory cache (cache_mem) +# +# always Keep most recently fetched objects in memory (default) +# +# disk Only disk cache hits are kept in memory, which means +# an object must first be cached on disk and then hit +# a second time before cached in memory. +# +# network Only objects fetched from network is kept in memory +#Default: +# Keep the most recently fetched objects in memory + +# TAG: memory_replacement_policy +# The memory replacement policy parameter determines which +# objects are purged from memory when memory space is needed. +# +# See cache_replacement_policy for details on algorithms. +#Default: +# memory_replacement_policy lru + +# DISK CACHE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: cache_replacement_policy +# The cache replacement policy parameter determines which +# objects are evicted (replaced) when disk space is needed. +# +# lru : Squid's original list based LRU policy +# heap GDSF : Greedy-Dual Size Frequency +# heap LFUDA: Least Frequently Used with Dynamic Aging +# heap LRU : LRU policy implemented using a heap +# +# Applies to any cache_dir lines listed below this directive. +# +# The LRU policies keeps recently referenced objects. +# +# The heap GDSF policy optimizes object hit rate by keeping smaller +# popular objects in cache so it has a better chance of getting a +# hit. It achieves a lower byte hit rate than LFUDA though since +# it evicts larger (possibly popular) objects. +# +# The heap LFUDA policy keeps popular objects in cache regardless of +# their size and thus optimizes byte hit rate at the expense of +# hit rate since one large, popular object will prevent many +# smaller, slightly less popular objects from being cached. +# +# Both policies utilize a dynamic aging mechanism that prevents +# cache pollution that can otherwise occur with frequency-based +# replacement policies. +# +# NOTE: if using the LFUDA replacement policy you should increase +# the value of maximum_object_size above its default of 4 MB to +# to maximize the potential byte hit rate improvement of LFUDA. +# +# For more information about the GDSF and LFUDA cache replacement +# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html +# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html. +#Default: +# cache_replacement_policy lru + +# TAG: minimum_object_size (bytes) +# Objects smaller than this size will NOT be saved on disk. The +# value is specified in bytes, and the default is 0 KB, which +# means all responses can be stored. +#Default: +# no limit + +# TAG: maximum_object_size (bytes) +# Set the default value for max-size parameter on any cache_dir. +# The value is specified in bytes, and the default is 4 MB. +# +# If you wish to get a high BYTES hit ratio, you should probably +# increase this (one 32 MB object hit counts for 3200 10KB +# hits). +# +# If you wish to increase hit ratio more than you want to +# save bandwidth you should leave this low. +# +# NOTE: if using the LFUDA replacement policy you should increase +# this value to maximize the byte hit rate improvement of LFUDA! +# See cache_replacement_policy for a discussion of this policy. +#Default: +# maximum_object_size 4 MB + +# TAG: cache_dir +# Format: +# cache_dir Type Directory-Name Fs-specific-data [options] +# +# You can specify multiple cache_dir lines to spread the +# cache among different disk partitions. +# +# Type specifies the kind of storage system to use. Only "ufs" +# is built by default. To enable any of the other storage systems +# see the --enable-storeio configure option. +# +# 'Directory' is a top-level directory where cache swap +# files will be stored. If you want to use an entire disk +# for caching, this can be the mount-point directory. +# The directory must exist and be writable by the Squid +# process. Squid will NOT create this directory for you. +# +# In SMP configurations, cache_dir must not precede the workers option +# and should use configuration macros or conditionals to give each +# worker interested in disk caching a dedicated cache directory. +# +# +# ==== The ufs store type ==== +# +# "ufs" is the old well-known Squid storage format that has always +# been there. +# +# Usage: +# cache_dir ufs Directory-Name Mbytes L1 L2 [options] +# +# 'Mbytes' is the amount of disk space (MB) to use under this +# directory. The default is 100 MB. Change this to suit your +# configuration. Do NOT put the size of your disk drive here. +# Instead, if you want Squid to use the entire disk drive, +# subtract 20% and use that value. +# +# 'L1' is the number of first-level subdirectories which +# will be created under the 'Directory'. The default is 16. +# +# 'L2' is the number of second-level subdirectories which +# will be created under each first-level directory. The default +# is 256. +# +# +# ==== The aufs store type ==== +# +# "aufs" uses the same storage format as "ufs", utilizing +# POSIX-threads to avoid blocking the main Squid process on +# disk-I/O. This was formerly known in Squid as async-io. +# +# Usage: +# cache_dir aufs Directory-Name Mbytes L1 L2 [options] +# +# see argument descriptions under ufs above +# +# +# ==== The diskd store type ==== +# +# "diskd" uses the same storage format as "ufs", utilizing a +# separate process to avoid blocking the main Squid process on +# disk-I/O. +# +# Usage: +# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n] +# +# see argument descriptions under ufs above +# +# Q1 specifies the number of unacknowledged I/O requests when Squid +# stops opening new files. If this many messages are in the queues, +# Squid won't open new files. Default is 64 +# +# Q2 specifies the number of unacknowledged messages when Squid +# starts blocking. If this many messages are in the queues, +# Squid blocks until it receives some replies. Default is 72 +# +# When Q1 < Q2 (the default), the cache directory is optimized +# for lower response time at the expense of a decrease in hit +# ratio. If Q1 > Q2, the cache directory is optimized for +# higher hit ratio at the expense of an increase in response +# time. +# +# +# ==== The rock store type ==== +# +# Usage: +# cache_dir rock Directory-Name Mbytes [options] +# +# The Rock Store type is a database-style storage. All cached +# entries are stored in a "database" file, using fixed-size slots. +# A single entry occupies one or more slots. +# +# If possible, Squid using Rock Store creates a dedicated kid +# process called "disker" to avoid blocking Squid worker(s) on disk +# I/O. One disker kid is created for each rock cache_dir. Diskers +# are created only when Squid, running in daemon mode, has support +# for the IpcIo disk I/O module. +# +# swap-timeout=msec: Squid will not start writing a miss to or +# reading a hit from disk if it estimates that the swap operation +# will take more than the specified number of milliseconds. By +# default and when set to zero, disables the disk I/O time limit +# enforcement. Ignored when using blocking I/O module because +# blocking synchronous I/O does not allow Squid to estimate the +# expected swap wait time. +# +# max-swap-rate=swaps/sec: Artificially limits disk access using +# the specified I/O rate limit. Swap out requests that +# would cause the average I/O rate to exceed the limit are +# delayed. Individual swap in requests (i.e., hits or reads) are +# not delayed, but they do contribute to measured swap rate and +# since they are placed in the same FIFO queue as swap out +# requests, they may wait longer if max-swap-rate is smaller. +# This is necessary on file systems that buffer "too +# many" writes and then start blocking Squid and other processes +# while committing those writes to disk. Usually used together +# with swap-timeout to avoid excessive delays and queue overflows +# when disk demand exceeds available disk "bandwidth". By default +# and when set to zero, disables the disk I/O rate limit +# enforcement. Currently supported by IpcIo module only. +# +# slot-size=bytes: The size of a database "record" used for +# storing cached responses. A cached response occupies at least +# one slot and all database I/O is done using individual slots so +# increasing this parameter leads to more disk space waste while +# decreasing it leads to more disk I/O overheads. Should be a +# multiple of your operating system I/O page size. Defaults to +# 16KBytes. A housekeeping header is stored with each slot and +# smaller slot-sizes will be rejected. The header is smaller than +# 100 bytes. +# +# +# ==== COMMON OPTIONS ==== +# +# no-store no new objects should be stored to this cache_dir. +# +# min-size=n the minimum object size in bytes this cache_dir +# will accept. It's used to restrict a cache_dir +# to only store large objects (e.g. AUFS) while +# other stores are optimized for smaller objects +# (e.g. Rock). +# Defaults to 0. +# +# max-size=n the maximum object size in bytes this cache_dir +# supports. +# The value in maximum_object_size directive sets +# the default unless more specific details are +# available (ie a small store capacity). +# +# Note: To make optimal use of the max-size limits you should order +# the cache_dir lines with the smallest max-size value first. +# +#Default: +# No disk cache. Store cache ojects only in memory. +# + +# Uncomment and adjust the following to add a disk cache directory. +#cache_dir ufs /var/spool/squid 100 16 256 + +# TAG: store_dir_select_algorithm +# How Squid selects which cache_dir to use when the response +# object will fit into more than one. +# +# Regardless of which algorithm is used the cache_dir min-size +# and max-size parameters are obeyed. As such they can affect +# the selection algorithm by limiting the set of considered +# cache_dir. +# +# Algorithms: +# +# least-load +# +# This algorithm is suited to caches with similar cache_dir +# sizes and disk speeds. +# +# The disk with the least I/O pending is selected. +# When there are multiple disks with the same I/O load ranking +# the cache_dir with most available capacity is selected. +# +# When a mix of cache_dir sizes are configured the faster disks +# have a naturally lower I/O loading and larger disks have more +# capacity. So space used to store objects and data throughput +# may be very unbalanced towards larger disks. +# +# +# round-robin +# +# This algorithm is suited to caches with unequal cache_dir +# disk sizes. +# +# Each cache_dir is selected in a rotation. The next suitable +# cache_dir is used. +# +# Available cache_dir capacity is only considered in relation +# to whether the object will fit and meets the min-size and +# max-size parameters. +# +# Disk I/O loading is only considered to prevent overload on slow +# disks. This algorithm does not spread objects by size, so any +# I/O loading per-disk may appear very unbalanced and volatile. +# +# If several cache_dirs use similar min-size, max-size, or other +# limits to to reject certain responses, then do not group such +# cache_dir lines together, to avoid round-robin selection bias +# towards the first cache_dir after the group. Instead, interleave +# cache_dir lines from different groups. For example: +# +# store_dir_select_algorithm round-robin +# cache_dir rock /hdd1 ... min-size=100000 +# cache_dir rock /ssd1 ... max-size=99999 +# cache_dir rock /hdd2 ... min-size=100000 +# cache_dir rock /ssd2 ... max-size=99999 +# cache_dir rock /hdd3 ... min-size=100000 +# cache_dir rock /ssd3 ... max-size=99999 +#Default: +# store_dir_select_algorithm least-load + +# TAG: max_open_disk_fds +# To avoid having disk as the I/O bottleneck Squid can optionally +# bypass the on-disk cache if more than this amount of disk file +# descriptors are open. +# +# A value of 0 indicates no limit. +#Default: +# no limit + +# TAG: cache_swap_low (percent, 0-100) +# The low-water mark for AUFS/UFS/diskd cache object eviction by +# the cache_replacement_policy algorithm. +# +# Removal begins when the swap (disk) usage of a cache_dir is +# above this low-water mark and attempts to maintain utilization +# near the low-water mark. +# +# As swap utilization increases towards the high-water mark set +# by cache_swap_high object eviction becomes more agressive. +# +# The value difference in percentages between low- and high-water +# marks represent an eviction rate of 300 objects per second and +# the rate continues to scale in agressiveness by multiples of +# this above the high-water mark. +# +# Defaults are 90% and 95%. If you have a large cache, 5% could be +# hundreds of MB. If this is the case you may wish to set these +# numbers closer together. +# +# See also cache_swap_high and cache_replacement_policy +#Default: +# cache_swap_low 90 + +# TAG: cache_swap_high (percent, 0-100) +# The high-water mark for AUFS/UFS/diskd cache object eviction by +# the cache_replacement_policy algorithm. +# +# Removal begins when the swap (disk) usage of a cache_dir is +# above the low-water mark set by cache_swap_low and attempts to +# maintain utilization near the low-water mark. +# +# As swap utilization increases towards this high-water mark object +# eviction becomes more agressive. +# +# The value difference in percentages between low- and high-water +# marks represent an eviction rate of 300 objects per second and +# the rate continues to scale in agressiveness by multiples of +# this above the high-water mark. +# +# Defaults are 90% and 95%. If you have a large cache, 5% could be +# hundreds of MB. If this is the case you may wish to set these +# numbers closer together. +# +# See also cache_swap_low and cache_replacement_policy +#Default: +# cache_swap_high 95 + +# LOGFILE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: logformat +# Usage: +# +# logformat +# +# Defines an access log format. +# +# The is a string with embedded % format codes +# +# % format codes all follow the same basic structure where all but +# the formatcode is optional. Output strings are automatically escaped +# as required according to their context and the output format +# modifiers are usually not needed, but can be specified if an explicit +# output format is desired. +# +# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode +# +# " output in quoted string format +# [ output in squid text log format as used by log_mime_hdrs +# # output in URL quoted format +# ' output as-is +# +# - left aligned +# +# width minimum and/or maximum field width: +# [width_min][.width_max] +# When minimum starts with 0, the field is zero-padded. +# String values exceeding maximum width are truncated. +# +# {arg} argument such as header name etc +# +# Format codes: +# +# % a literal % character +# sn Unique sequence number per log line entry +# err_code The ID of an error response served by Squid or +# a similar internal error identifier. +# err_detail Additional err_code-dependent error information. +# note The annotation specified by the argument. Also +# logs the adaptation meta headers set by the +# adaptation_meta configuration parameter. +# If no argument given all annotations logged. +# The argument may include a separator to use with +# annotation values: +# name[:separator] +# By default, multiple note values are separated with "," +# and multiple notes are separated with "\r\n". +# When logging named notes with %{name}note, the +# explicitly configured separator is used between note +# values. When logging all notes with %note, the +# explicitly configured separator is used between +# individual notes. There is currently no way to +# specify both value and notes separators when logging +# all notes with %note. +# +# Connection related format codes: +# +# >a Client source IP address +# >A Client FQDN +# >p Client source port +# >eui Client source EUI (MAC address, EUI-48 or EUI-64 identifier) +# >la Local IP address the client connected to +# >lp Local port number the client connected to +# >qos Client connection TOS/DSCP value set by Squid +# >nfmark Client connection netfilter mark set by Squid +# +# la Local listening IP address the client connection was connected to. +# lp Local listening port number the client connection was connected to. +# +# . format. +# Currently, Squid considers the master transaction +# started when a complete HTTP request header initiating +# the transaction is received from the client. This is +# the same value that Squid uses to calculate transaction +# response time when logging %tr to access.log. Currently, +# Squid uses millisecond resolution for %tS values, +# similar to the default access.log "current time" field +# (%ts.%03tu). +# +# Access Control related format codes: +# +# et Tag returned by external acl +# ea Log string returned by external acl +# un User name (any available) +# ul User name from authentication +# ue User name from external acl helper +# ui User name from ident +# un A user name. Expands to the first available name +# from the following list of information sources: +# - authenticated user name, like %ul +# - user name supplied by an external ACL, like %ue +# - SSL client name, like %us +# - ident user name, like %ui +# credentials Client credentials. The exact meaning depends on +# the authentication scheme: For Basic authentication, +# it is the password; for Digest, the realm sent by the +# client; for NTLM and Negotiate, the client challenge +# or client credentials prefixed with "YR " or "KK ". +# +# HTTP related format codes: +# +# REQUEST +# +# [http::]rm Request method (GET/POST etc) +# [http::]>rm Request method from client +# [http::]ru Request URL from client +# [http::]rs Request URL scheme from client +# [http::]rd Request URL domain from client +# [http::]rP Request URL port from client +# [http::]rp Request URL path excluding hostname from client +# [http::]rv Request protocol version from client +# [http::]h Original received request header. +# Usually differs from the request header sent by +# Squid, although most fields are often preserved. +# Accepts optional header field name/value filter +# argument using name[:[separator]element] format. +# [http::]>ha Received request header after adaptation and +# redirection (pre-cache REQMOD vectoring point). +# Usually differs from the request header sent by +# Squid, although most fields are often preserved. +# Optional header name argument as for >h +# +# +# RESPONSE +# +# [http::]Hs HTTP status code sent to the client +# +# [http::]h +# +# [http::]mt MIME content type +# +# +# SIZE COUNTERS +# +# [http::]st Total size of request + reply traffic with client +# [http::]>st Total size of request received from client. +# Excluding chunked encoding bytes. +# [http::]sh Size of request headers received from client +# [http::]sni SSL client SNI sent to Squid. Available only +# after the peek, stare, or splice SSL bumping +# actions. +# +# If ICAP is enabled, the following code becomes available (as +# well as ICAP log codes documented with the icap_log option): +# +# icap::tt Total ICAP processing time for the HTTP +# transaction. The timer ticks when ICAP +# ACLs are checked and when ICAP +# transaction is in progress. +# +# If adaptation is enabled the following three codes become available: +# +# adapt::cert_subject The Subject field of the received client +# SSL certificate or a dash ('-') if Squid has +# received an invalid/malformed certificate or +# no certificate at all. Consider encoding the +# logged value because Subject often has spaces. +# +# %ssl::>cert_issuer The Issuer field of the received client +# SSL certificate or a dash ('-') if Squid has +# received an invalid/malformed certificate or +# no certificate at all. Consider encoding the +# logged value because Issuer often has spaces. +# +# The default formats available (which do not need re-defining) are: +# +#logformat squid %ts.%03tu %6tr %>a %Ss/%03>Hs %a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %h" "%{User-Agent}>h" %Ss:%Sh +#logformat referrer %ts.%03tu %>a %{Referer}>h %ru +#logformat useragent %>a [%tl] "%{User-Agent}>h" +# +# NOTE: When the log_mime_hdrs directive is set to ON. +# The squid, common and combined formats have a safely encoded copy +# of the mime headers appended to each line within a pair of brackets. +# +# NOTE: The common and combined formats are not quite true to the Apache definition. +# The logs from Squid contain an extra status and hierarchy code appended. +# +#Default: +# The format definitions squid, common, combined, referrer, useragent are built in. + +# TAG: access_log +# Configures whether and how Squid logs HTTP and ICP transactions. +# If access logging is enabled, a single line is logged for every +# matching HTTP or ICP request. The recommended directive formats are: +# +# access_log : [option ...] [acl acl ...] +# access_log none [acl acl ...] +# +# The following directive format is accepted but may be deprecated: +# access_log : [ [acl acl ...]] +# +# In most cases, the first ACL name must not contain the '=' character +# and should not be equal to an existing logformat name. You can always +# start with an 'all' ACL to work around those restrictions. +# +# Will log to the specified module:place using the specified format (which +# must be defined in a logformat directive) those entries which match +# ALL the acl's specified (which must be defined in acl clauses). +# If no acl is specified, all requests will be logged to this destination. +# +# ===== Available options for the recommended directive format ===== +# +# logformat=name Names log line format (either built-in or +# defined by a logformat directive). Defaults +# to 'squid'. +# +# buffer-size=64KB Defines approximate buffering limit for log +# records (see buffered_logs). Squid should not +# keep more than the specified size and, hence, +# should flush records before the buffer becomes +# full to avoid overflows under normal +# conditions (the exact flushing algorithm is +# module-dependent though). The on-error option +# controls overflow handling. +# +# on-error=die|drop Defines action on unrecoverable errors. The +# 'drop' action ignores (i.e., does not log) +# affected log records. The default 'die' action +# kills the affected worker. The drop action +# support has not been tested for modules other +# than tcp. +# +# ===== Modules Currently available ===== +# +# none Do not log any requests matching these ACL. +# Do not specify Place or logformat name. +# +# stdio Write each log line to disk immediately at the completion of +# each request. +# Place: the filename and path to be written. +# +# daemon Very similar to stdio. But instead of writing to disk the log +# line is passed to a daemon helper for asychronous handling instead. +# Place: varies depending on the daemon. +# +# log_file_daemon Place: the file name and path to be written. +# +# syslog To log each request via syslog facility. +# Place: The syslog facility and priority level for these entries. +# Place Format: facility.priority +# +# where facility could be any of: +# authpriv, daemon, local0 ... local7 or user. +# +# And priority could be any of: +# err, warning, notice, info, debug. +# +# udp To send each log line as text data to a UDP receiver. +# Place: The destination host name or IP and port. +# Place Format: //host:port +# +# tcp To send each log line as text data to a TCP receiver. +# Lines may be accumulated before sending (see buffered_logs). +# Place: The destination host name or IP and port. +# Place Format: //host:port +# +# Default: +# access_log daemon:/var/log/squid/access.log squid +#Default: +# access_log daemon:/var/log/squid/access.log squid + +# TAG: icap_log +# ICAP log files record ICAP transaction summaries, one line per +# transaction. +# +# The icap_log option format is: +# icap_log [ [acl acl ...]] +# icap_log none [acl acl ...]] +# +# Please see access_log option documentation for details. The two +# kinds of logs share the overall configuration approach and many +# features. +# +# ICAP processing of a single HTTP message or transaction may +# require multiple ICAP transactions. In such cases, multiple +# ICAP transaction log lines will correspond to a single access +# log line. +# +# ICAP log supports many access.log logformat %codes. In ICAP context, +# HTTP message-related %codes are applied to the HTTP message embedded +# in an ICAP message. Logformat "%http::>..." codes are used for HTTP +# messages embedded in ICAP requests while "%http::<..." codes are used +# for HTTP messages embedded in ICAP responses. For example: +# +# http::>h To-be-adapted HTTP message headers sent by Squid to +# the ICAP service. For REQMOD transactions, these are +# HTTP request headers. For RESPMOD, these are HTTP +# response headers, but Squid currently cannot log them +# (i.e., %http::>h will expand to "-" for RESPMOD). +# +# http::st The total size of the ICAP request sent to the ICAP +# server (ICAP headers + ICAP body), including chunking +# metadata (if any). +# +# icap::h ICAP request header(s). Similar to >h. +# +# icap::A %icap::to/%03icap::Hs %icap::\n - logfile data +# R\n - rotate file +# T\n - truncate file +# O\n - reopen file +# F\n - flush file +# r\n - set rotate count to +# b\n - 1 = buffer output, 0 = don't buffer output +# +# No responses is expected. +#Default: +# logfile_daemon /usr/lib/squid/log_file_daemon + +# TAG: stats_collection allow|deny acl acl... +# This options allows you to control which requests gets accounted +# in performance counters. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow logging for all transactions. + +# TAG: cache_store_log +# Logs the activities of the storage manager. Shows which +# objects are ejected from the cache, and which objects are +# saved and for how long. +# There are not really utilities to analyze this data, so you can safely +# disable it (the default). +# +# Store log uses modular logging outputs. See access_log for the list +# of modules supported. +# +# Example: +# cache_store_log stdio:/var/log/squid/store.log +# cache_store_log daemon:/var/log/squid/store.log +#Default: +# none + +# TAG: cache_swap_state +# Location for the cache "swap.state" file. This index file holds +# the metadata of objects saved on disk. It is used to rebuild +# the cache during startup. Normally this file resides in each +# 'cache_dir' directory, but you may specify an alternate +# pathname here. Note you must give a full filename, not just +# a directory. Since this is the index for the whole object +# list you CANNOT periodically rotate it! +# +# If %s can be used in the file name it will be replaced with a +# a representation of the cache_dir name where each / is replaced +# with '.'. This is needed to allow adding/removing cache_dir +# lines when cache_swap_log is being used. +# +# If have more than one 'cache_dir', and %s is not used in the name +# these swap logs will have names such as: +# +# cache_swap_log.00 +# cache_swap_log.01 +# cache_swap_log.02 +# +# The numbered extension (which is added automatically) +# corresponds to the order of the 'cache_dir' lines in this +# configuration file. If you change the order of the 'cache_dir' +# lines in this file, these index files will NOT correspond to +# the correct 'cache_dir' entry (unless you manually rename +# them). We recommend you do NOT use this option. It is +# better to keep these index files in each 'cache_dir' directory. +#Default: +# Store the journal inside its cache_dir + +# TAG: logfile_rotate +# Specifies the number of logfile rotations to make when you +# type 'squid -k rotate'. The default is 10, which will rotate +# with extensions 0 through 9. Setting logfile_rotate to 0 will +# disable the file name rotation, but the logfiles are still closed +# and re-opened. This will enable you to rename the logfiles +# yourself just before sending the rotate signal. +# +# Note, the 'squid -k rotate' command normally sends a USR1 +# signal to the running squid process. In certain situations +# (e.g. on Linux with Async I/O), USR1 is used for other +# purposes, so -k rotate uses another signal. It is best to get +# in the habit of using 'squid -k rotate' instead of 'kill -USR1 +# '. +# +# Note, from Squid-3.1 this option is only a default for cache.log, +# that log can be rotated separately by using debug_options. +# +# Note2, for Debian/Linux the default of logfile_rotate is +# zero, since it includes external logfile-rotation methods. +#Default: +# logfile_rotate 0 + +# TAG: mime_table +# Path to Squid's icon configuration file. +# +# You shouldn't need to change this, but the default file contains +# examples and formatting information if you do. +#Default: +# mime_table /usr/share/squid/mime.conf + +# TAG: log_mime_hdrs on|off +# The Cache can record both the request and the response MIME +# headers for each HTTP transaction. The headers are encoded +# safely and will appear as two bracketed fields at the end of +# the access log (for either the native or httpd-emulated log +# formats). To enable this logging set log_mime_hdrs to 'on'. +#Default: +# log_mime_hdrs off + +# TAG: pid_filename +# A filename to write the process-id to. To disable, enter "none". +#Default: +# pid_filename /var/run/squid.pid + +# TAG: client_netmask +# A netmask for client addresses in logfiles and cachemgr output. +# Change this to protect the privacy of your cache clients. +# A netmask of 255.255.255.0 will log all IP's in that range with +# the last digit set to '0'. +#Default: +# Log full client IP address + +# TAG: strip_query_terms +# By default, Squid strips query terms from requested URLs before +# logging. This protects your user's privacy and reduces log size. +# +# When investigating HIT/MISS or other caching behaviour you +# will need to disable this to see the full URL used by Squid. +#Default: +# strip_query_terms on + +# TAG: buffered_logs on|off +# Whether to write/send access_log records ASAP or accumulate them and +# then write/send them in larger chunks. Buffering may improve +# performance because it decreases the number of I/Os. However, +# buffering increases the delay before log records become available to +# the final recipient (e.g., a disk file or logging daemon) and, +# hence, increases the risk of log records loss. +# +# Note that even when buffered_logs are off, Squid may have to buffer +# records if it cannot write/send them immediately due to pending I/Os +# (e.g., the I/O writing the previous log record) or connectivity loss. +# +# Currently honored by 'daemon' and 'tcp' access_log modules only. +#Default: +# buffered_logs off + +# TAG: netdb_filename +# Where Squid stores it's netdb journal. +# When enabled this journal preserves netdb state between restarts. +# +# To disable, enter "none". +#Default: +# netdb_filename stdio:/var/log/squid/netdb.state + +# OPTIONS FOR TROUBLESHOOTING +# ----------------------------------------------------------------------------- + +# TAG: cache_log +# Squid administrative logging file. +# +# This is where general information about Squid behavior goes. You can +# increase the amount of data logged to this file and how often it is +# rotated with "debug_options" +#Default: +# cache_log /var/log/squid/cache.log + +# TAG: debug_options +# Logging options are set as section,level where each source file +# is assigned a unique section. Lower levels result in less +# output, Full debugging (level 9) can result in a very large +# log file, so be careful. +# +# The magic word "ALL" sets debugging levels for all sections. +# The default is to run with "ALL,1" to record important warnings. +# +# The rotate=N option can be used to keep more or less of these logs +# than would otherwise be kept by logfile_rotate. +# For most uses a single log should be enough to monitor current +# events affecting Squid. +#Default: +# Log all critical and important messages. + +# TAG: coredump_dir +# By default Squid leaves core files in the directory from where +# it was started. If you set 'coredump_dir' to a directory +# that exists, Squid will chdir() to that directory at startup +# and coredump files will be left there. +# +#Default: +# Use the directory from where Squid was started. +# + +# Leave coredumps in the first cache dir +coredump_dir /var/spool/squid + +# OPTIONS FOR FTP GATEWAYING +# ----------------------------------------------------------------------------- + +# TAG: ftp_user +# If you want the anonymous login password to be more informative +# (and enable the use of picky FTP servers), set this to something +# reasonable for your domain, like wwwuser@somewhere.net +# +# The reason why this is domainless by default is the +# request can be made on the behalf of a user in any domain, +# depending on how the cache is used. +# Some FTP server also validate the email address is valid +# (for example perl.com). +#Default: +# ftp_user Squid@ + +# TAG: ftp_passive +# If your firewall does not allow Squid to use passive +# connections, turn off this option. +# +# Use of ftp_epsv_all option requires this to be ON. +#Default: +# ftp_passive on + +# TAG: ftp_epsv_all +# FTP Protocol extensions permit the use of a special "EPSV ALL" command. +# +# NATs may be able to put the connection on a "fast path" through the +# translator, as the EPRT command will never be used and therefore, +# translation of the data portion of the segments will never be needed. +# +# When a client only expects to do two-way FTP transfers this may be +# useful. +# If squid finds that it must do a three-way FTP transfer after issuing +# an EPSV ALL command, the FTP session will fail. +# +# If you have any doubts about this option do not use it. +# Squid will nicely attempt all other connection methods. +# +# Requires ftp_passive to be ON (default) for any effect. +#Default: +# ftp_epsv_all off + +# TAG: ftp_epsv +# FTP Protocol extensions permit the use of a special "EPSV" command. +# +# NATs may be able to put the connection on a "fast path" through the +# translator using EPSV, as the EPRT command will never be used +# and therefore, translation of the data portion of the segments +# will never be needed. +# +# EPSV is often required to interoperate with FTP servers on IPv6 +# networks. On the other hand, it may break some IPv4 servers. +# +# By default, EPSV may try EPSV with any FTP server. To fine tune +# that decision, you may restrict EPSV to certain clients or servers +# using ACLs: +# +# ftp_epsv allow|deny al1 acl2 ... +# +# WARNING: Disabling EPSV may cause problems with external NAT and IPv6. +# +# Only fast ACLs are supported. +# Requires ftp_passive to be ON (default) for any effect. +#Default: +# none + +# TAG: ftp_eprt +# FTP Protocol extensions permit the use of a special "EPRT" command. +# +# This extension provides a protocol neutral alternative to the +# IPv4-only PORT command. When supported it enables active FTP data +# channels over IPv6 and efficient NAT handling. +# +# Turning this OFF will prevent EPRT being attempted and will skip +# straight to using PORT for IPv4 servers. +# +# Some devices are known to not handle this extension correctly and +# may result in crashes. Devices which suport EPRT enough to fail +# cleanly will result in Squid attempting PORT anyway. This directive +# should only be disabled when EPRT results in device failures. +# +# WARNING: Doing so will convert Squid back to the old behavior with all +# the related problems with external NAT devices/layers and IPv4-only FTP. +#Default: +# ftp_eprt on + +# TAG: ftp_sanitycheck +# For security and data integrity reasons Squid by default performs +# sanity checks of the addresses of FTP data connections ensure the +# data connection is to the requested server. If you need to allow +# FTP connections to servers using another IP address for the data +# connection turn this off. +#Default: +# ftp_sanitycheck on + +# TAG: ftp_telnet_protocol +# The FTP protocol is officially defined to use the telnet protocol +# as transport channel for the control connection. However, many +# implementations are broken and does not respect this aspect of +# the FTP protocol. +# +# If you have trouble accessing files with ASCII code 255 in the +# path or similar problems involving this ASCII code you can +# try setting this directive to off. If that helps, report to the +# operator of the FTP server in question that their FTP server +# is broken and does not follow the FTP standard. +#Default: +# ftp_telnet_protocol on + +# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS +# ----------------------------------------------------------------------------- + +# TAG: diskd_program +# Specify the location of the diskd executable. +# Note this is only useful if you have compiled in +# diskd as one of the store io modules. +#Default: +# diskd_program /usr/lib/squid/diskd + +# TAG: unlinkd_program +# Specify the location of the executable for file deletion process. +#Default: +# unlinkd_program /usr/lib/squid/unlinkd + +# TAG: pinger_program +# Specify the location of the executable for the pinger process. +#Default: +# pinger_program /usr/lib/squid/pinger + +# TAG: pinger_enable +# Control whether the pinger is active at run-time. +# Enables turning ICMP pinger on and off with a simple +# squid -k reconfigure. +#Default: +# pinger_enable on + +# OPTIONS FOR URL REWRITING +# ----------------------------------------------------------------------------- + +# TAG: url_rewrite_program +# Specify the location of the executable URL rewriter to use. +# Since they can perform almost any function there isn't one included. +# +# For each requested URL, the rewriter will receive on line with the format +# +# [channel-ID ] URL [ extras] +# +# See url_rewrite_extras on how to send "extras" with optional values to +# the helper. +# After processing the request the helper must reply using the following format: +# +# [channel-ID ] result [ kv-pairs] +# +# The result code can be: +# +# OK status=30N url="..." +# Redirect the URL to the one supplied in 'url='. +# 'status=' is optional and contains the status code to send +# the client in Squids HTTP response. It must be one of the +# HTTP redirect status codes: 301, 302, 303, 307, 308. +# When no status is given Squid will use 302. +# +# OK rewrite-url="..." +# Rewrite the URL to the one supplied in 'rewrite-url='. +# The new URL is fetched directly by Squid and returned to +# the client as the response to its request. +# +# OK +# When neither of url= and rewrite-url= are sent Squid does +# not change the URL. +# +# ERR +# Do not change the URL. +# +# BH +# An internal error occurred in the helper, preventing +# a result being identified. The 'message=' key name is +# reserved for delivering a log message. +# +# +# In addition to the above kv-pairs Squid also understands the following +# optional kv-pairs received from URL rewriters: +# clt_conn_tag=TAG +# Associates a TAG with the client TCP connection. +# The TAG is treated as a regular annotation but persists across +# future requests on the client connection rather than just the +# current request. A helper may update the TAG during subsequent +# requests be returning a new kv-pair. +# +# When using the concurrency= option the protocol is changed by +# introducing a query channel tag in front of the request/response. +# The query channel tag is a number between 0 and concurrency-1. +# This value must be echoed back unchanged to Squid as the first part +# of the response relating to its request. +# +# WARNING: URL re-writing ability should be avoided whenever possible. +# Use the URL redirect form of response instead. +# +# Re-write creates a difference in the state held by the client +# and server. Possibly causing confusion when the server response +# contains snippets of its view state. Embeded URLs, response +# and content Location headers, etc. are not re-written by this +# interface. +# +# By default, a URL rewriter is not used. +#Default: +# none + +# TAG: url_rewrite_children +# The maximum number of redirector processes to spawn. If you limit +# it too few Squid will have to wait for them to process a backlog of +# URLs, slowing it down. If you allow too many they will use RAM +# and other system resources noticably. +# +# The startup= and idle= options allow some measure of skew in your +# tuning. +# +# startup= +# +# Sets a minimum of how many processes are to be spawned when Squid +# starts or reconfigures. When set to zero the first request will +# cause spawning of the first child process to handle it. +# +# Starting too few will cause an initial slowdown in traffic as Squid +# attempts to simultaneously spawn enough processes to cope. +# +# idle= +# +# Sets a minimum of how many processes Squid is to try and keep available +# at all times. When traffic begins to rise above what the existing +# processes can handle this many more will be spawned up to the maximum +# configured. A minimum setting of 1 is required. +# +# concurrency= +# +# The number of requests each redirector helper can handle in +# parallel. Defaults to 0 which indicates the redirector +# is a old-style single threaded redirector. +# +# When this directive is set to a value >= 1 then the protocol +# used to communicate with the helper is modified to include +# an ID in front of the request/response. The ID from the request +# must be echoed back with the response to that request. +#Default: +# url_rewrite_children 20 startup=0 idle=1 concurrency=0 + +# TAG: url_rewrite_host_header +# To preserve same-origin security policies in browsers and +# prevent Host: header forgery by redirectors Squid rewrites +# any Host: header in redirected requests. +# +# If you are running an accelerator this may not be a wanted +# effect of a redirector. This directive enables you disable +# Host: alteration in reverse-proxy traffic. +# +# WARNING: Entries are cached on the result of the URL rewriting +# process, so be careful if you have domain-virtual hosts. +# +# WARNING: Squid and other software verifies the URL and Host +# are matching, so be careful not to relay through other proxies +# or inspecting firewalls with this disabled. +#Default: +# url_rewrite_host_header on + +# TAG: url_rewrite_access +# If defined, this access list specifies which requests are +# sent to the redirector processes. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: url_rewrite_bypass +# When this is 'on', a request will not go through the +# redirector if all the helpers are busy. If this is 'off' +# and the redirector queue grows too large, Squid will exit +# with a FATAL error and ask you to increase the number of +# redirectors. You should only enable this if the redirectors +# are not critical to your caching system. If you use +# redirectors for access control, and you enable this option, +# users may have access to pages they should not +# be allowed to request. +#Default: +# url_rewrite_bypass off + +# TAG: url_rewrite_extras +# Specifies a string to be append to request line format for the +# rewriter helper. "Quoted" format values may contain spaces and +# logformat %macros. In theory, any logformat %macro can be used. +# In practice, a %macro expands as a dash (-) if the helper request is +# sent before the required macro information is available to Squid. +#Default: +# url_rewrite_extras "%>a/%>A %un %>rm myip=%la myport=%lp" + +# OPTIONS FOR STORE ID +# ----------------------------------------------------------------------------- + +# TAG: store_id_program +# Specify the location of the executable StoreID helper to use. +# Since they can perform almost any function there isn't one included. +# +# For each requested URL, the helper will receive one line with the format +# +# [channel-ID ] URL [ extras] +# +# +# After processing the request the helper must reply using the following format: +# +# [channel-ID ] result [ kv-pairs] +# +# The result code can be: +# +# OK store-id="..." +# Use the StoreID supplied in 'store-id='. +# +# ERR +# The default is to use HTTP request URL as the store ID. +# +# BH +# An internal error occured in the helper, preventing +# a result being identified. +# +# In addition to the above kv-pairs Squid also understands the following +# optional kv-pairs received from URL rewriters: +# clt_conn_tag=TAG +# Associates a TAG with the client TCP connection. +# Please see url_rewrite_program related documentation for this +# kv-pair +# +# Helper programs should be prepared to receive and possibly ignore +# additional whitespace-separated tokens on each input line. +# +# When using the concurrency= option the protocol is changed by +# introducing a query channel tag in front of the request/response. +# The query channel tag is a number between 0 and concurrency-1. +# This value must be echoed back unchanged to Squid as the first part +# of the response relating to its request. +# +# NOTE: when using StoreID refresh_pattern will apply to the StoreID +# returned from the helper and not the URL. +# +# WARNING: Wrong StoreID value returned by a careless helper may result +# in the wrong cached response returned to the user. +# +# By default, a StoreID helper is not used. +#Default: +# none + +# TAG: store_id_extras +# Specifies a string to be append to request line format for the +# StoreId helper. "Quoted" format values may contain spaces and +# logformat %macros. In theory, any logformat %macro can be used. +# In practice, a %macro expands as a dash (-) if the helper request is +# sent before the required macro information is available to Squid. +#Default: +# store_id_extras "%>a/%>A %un %>rm myip=%la myport=%lp" + +# TAG: store_id_children +# The maximum number of StoreID helper processes to spawn. If you limit +# it too few Squid will have to wait for them to process a backlog of +# requests, slowing it down. If you allow too many they will use RAM +# and other system resources noticably. +# +# The startup= and idle= options allow some measure of skew in your +# tuning. +# +# startup= +# +# Sets a minimum of how many processes are to be spawned when Squid +# starts or reconfigures. When set to zero the first request will +# cause spawning of the first child process to handle it. +# +# Starting too few will cause an initial slowdown in traffic as Squid +# attempts to simultaneously spawn enough processes to cope. +# +# idle= +# +# Sets a minimum of how many processes Squid is to try and keep available +# at all times. When traffic begins to rise above what the existing +# processes can handle this many more will be spawned up to the maximum +# configured. A minimum setting of 1 is required. +# +# concurrency= +# +# The number of requests each storeID helper can handle in +# parallel. Defaults to 0 which indicates the helper +# is a old-style single threaded program. +# +# When this directive is set to a value >= 1 then the protocol +# used to communicate with the helper is modified to include +# an ID in front of the request/response. The ID from the request +# must be echoed back with the response to that request. +#Default: +# store_id_children 20 startup=0 idle=1 concurrency=0 + +# TAG: store_id_access +# If defined, this access list specifies which requests are +# sent to the StoreID processes. By default all requests +# are sent. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: store_id_bypass +# When this is 'on', a request will not go through the +# helper if all helpers are busy. If this is 'off' +# and the helper queue grows too large, Squid will exit +# with a FATAL error and ask you to increase the number of +# helpers. You should only enable this if the helperss +# are not critical to your caching system. If you use +# helpers for critical caching components, and you enable this +# option, users may not get objects from cache. +#Default: +# store_id_bypass on + +# OPTIONS FOR TUNING THE CACHE +# ----------------------------------------------------------------------------- + +# TAG: cache +# Requests denied by this directive will not be served from the cache +# and their responses will not be stored in the cache. This directive +# has no effect on other transactions and on already cached responses. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# This and the two other similar caching directives listed below are +# checked at different transaction processing stages, have different +# access to response information, affect different cache operations, +# and differ in slow ACLs support: +# +# * cache: Checked before Squid makes a hit/miss determination. +# No access to reply information! +# Denies both serving a hit and storing a miss. +# Supports both fast and slow ACLs. +# * send_hit: Checked after a hit was detected. +# Has access to reply (hit) information. +# Denies serving a hit only. +# Supports fast ACLs only. +# * store_miss: Checked before storing a cachable miss. +# Has access to reply (miss) information. +# Denies storing a miss only. +# Supports fast ACLs only. +# +# If you are not sure which of the three directives to use, apply the +# following decision logic: +# +# * If your ACL(s) are of slow type _and_ need response info, redesign. +# Squid does not support that particular combination at this time. +# Otherwise: +# * If your directive ACL(s) are of slow type, use "cache"; and/or +# * if your directive ACL(s) need no response info, use "cache". +# Otherwise: +# * If you do not want the response cached, use store_miss; and/or +# * if you do not want a hit on a cached response, use send_hit. +#Default: +# By default, this directive is unused and has no effect. + +# TAG: send_hit +# Responses denied by this directive will not be served from the cache +# (but may still be cached, see store_miss). This directive has no +# effect on the responses it allows and on the cached objects. +# +# Please see the "cache" directive for a summary of differences among +# store_miss, send_hit, and cache directives. +# +# Unlike the "cache" directive, send_hit only supports fast acl +# types. See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# For example: +# +# # apply custom Store ID mapping to some URLs +# acl MapMe dstdomain .c.example.com +# store_id_program ... +# store_id_access allow MapMe +# +# # but prevent caching of special responses +# # such as 302 redirects that cause StoreID loops +# acl Ordinary http_status 200-299 +# store_miss deny MapMe !Ordinary +# +# # and do not serve any previously stored special responses +# # from the cache (in case they were already cached before +# # the above store_miss rule was in effect). +# send_hit deny MapMe !Ordinary +#Default: +# By default, this directive is unused and has no effect. + +# TAG: store_miss +# Responses denied by this directive will not be cached (but may still +# be served from the cache, see send_hit). This directive has no +# effect on the responses it allows and on the already cached responses. +# +# Please see the "cache" directive for a summary of differences among +# store_miss, send_hit, and cache directives. See the +# send_hit directive for a usage example. +# +# Unlike the "cache" directive, store_miss only supports fast acl +# types. See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# By default, this directive is unused and has no effect. + +# TAG: max_stale time-units +# This option puts an upper limit on how stale content Squid +# will serve from the cache if cache validation fails. +# Can be overriden by the refresh_pattern max-stale option. +#Default: +# max_stale 1 week + +# TAG: refresh_pattern +# usage: refresh_pattern [-i] regex min percent max [options] +# +# By default, regular expressions are CASE-SENSITIVE. To make +# them case-insensitive, use the -i option. +# +# 'Min' is the time (in minutes) an object without an explicit +# expiry time should be considered fresh. The recommended +# value is 0, any higher values may cause dynamic applications +# to be erroneously cached unless the application designer +# has taken the appropriate actions. +# +# 'Percent' is a percentage of the objects age (time since last +# modification age) an object without explicit expiry time +# will be considered fresh. +# +# 'Max' is an upper limit on how long objects without an explicit +# expiry time will be considered fresh. The value is also used +# to form Cache-Control: max-age header for a request sent from +# Squid to origin/parent. +# +# options: override-expire +# override-lastmod +# reload-into-ims +# ignore-reload +# ignore-no-store +# ignore-must-revalidate +# ignore-private +# ignore-auth +# max-stale=NN +# refresh-ims +# store-stale +# +# override-expire enforces min age even if the server +# sent an explicit expiry time (e.g., with the +# Expires: header or Cache-Control: max-age). Doing this +# VIOLATES the HTTP standard. Enabling this feature +# could make you liable for problems which it causes. +# +# Note: override-expire does not enforce staleness - it only extends +# freshness / min. If the server returns a Expires time which +# is longer than your max time, Squid will still consider +# the object fresh for that period of time. +# +# override-lastmod enforces min age even on objects +# that were modified recently. +# +# reload-into-ims changes a client no-cache or ``reload'' +# request for a cached entry into a conditional request using +# If-Modified-Since and/or If-None-Match headers, provided the +# cached entry has a Last-Modified and/or a strong ETag header. +# Doing this VIOLATES the HTTP standard. Enabling this feature +# could make you liable for problems which it causes. +# +# ignore-reload ignores a client no-cache or ``reload'' +# header. Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which +# it causes. +# +# ignore-no-store ignores any ``Cache-control: no-store'' +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate`` +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-private ignores any ``Cache-control: private'' +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-auth caches responses to requests with authorization, +# as if the originserver had sent ``Cache-control: public'' +# in the response header. Doing this VIOLATES the HTTP standard. +# Enabling this feature could make you liable for problems which +# it causes. +# +# refresh-ims causes squid to contact the origin server +# when a client issues an If-Modified-Since request. This +# ensures that the client will receive an updated version +# if one is available. +# +# store-stale stores responses even if they don't have explicit +# freshness or a validator (i.e., Last-Modified or an ETag) +# present, or if they're already stale. By default, Squid will +# not cache such responses because they usually can't be +# reused. Note that such responses will be stale by default. +# +# max-stale=NN provide a maximum staleness factor. Squid won't +# serve objects more stale than this even if it failed to +# validate the object. Default: use the max_stale global limit. +# +# Basically a cached object is: +# +# FRESH if expire > now, else STALE +# STALE if age > max +# FRESH if lm-factor < percent, else STALE +# FRESH if age < min +# else STALE +# +# The refresh_pattern lines are checked in the order listed here. +# The first entry which matches is used. If none of the entries +# match the default will be used. +# +# Note, you must uncomment all the default lines if you want +# to change one. The default setting is only active if none is +# used. +# +# + +# +# Add any of your own refresh_pattern entries above these. +# +refresh_pattern ^ftp: 1440 20% 10080 +refresh_pattern ^gopher: 1440 0% 1440 +refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 +refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 +# example lin deb packages +#refresh_pattern (\.deb|\.udeb)$ 129600 100% 129600 +refresh_pattern . 0 20% 4320 + +# TAG: quick_abort_min (KB) +#Default: +# quick_abort_min 16 KB + +# TAG: quick_abort_max (KB) +#Default: +# quick_abort_max 16 KB + +# TAG: quick_abort_pct (percent) +# The cache by default continues downloading aborted requests +# which are almost completed (less than 16 KB remaining). This +# may be undesirable on slow (e.g. SLIP) links and/or very busy +# caches. Impatient users may tie up file descriptors and +# bandwidth by repeatedly requesting and immediately aborting +# downloads. +# +# When the user aborts a request, Squid will check the +# quick_abort values to the amount of data transferred until +# then. +# +# If the transfer has less than 'quick_abort_min' KB remaining, +# it will finish the retrieval. +# +# If the transfer has more than 'quick_abort_max' KB remaining, +# it will abort the retrieval. +# +# If more than 'quick_abort_pct' of the transfer has completed, +# it will finish the retrieval. +# +# If you do not want any retrieval to continue after the client +# has aborted, set both 'quick_abort_min' and 'quick_abort_max' +# to '0 KB'. +# +# If you want retrievals to always continue if they are being +# cached set 'quick_abort_min' to '-1 KB'. +#Default: +# quick_abort_pct 95 + +# TAG: read_ahead_gap buffer-size +# The amount of data the cache will buffer ahead of what has been +# sent to the client when retrieving an object from another server. +#Default: +# read_ahead_gap 16 KB + +# TAG: negative_ttl time-units +# Set the Default Time-to-Live (TTL) for failed requests. +# Certain types of failures (such as "connection refused" and +# "404 Not Found") are able to be negatively-cached for a short time. +# Modern web servers should provide Expires: header, however if they +# do not this can provide a minimum TTL. +# The default is not to cache errors with unknown expiry details. +# +# Note that this is different from negative caching of DNS lookups. +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +#Default: +# negative_ttl 0 seconds + +# TAG: positive_dns_ttl time-units +# Upper limit on how long Squid will cache positive DNS responses. +# Default is 6 hours (360 minutes). This directive must be set +# larger than negative_dns_ttl. +#Default: +# positive_dns_ttl 6 hours + +# TAG: negative_dns_ttl time-units +# Time-to-Live (TTL) for negative caching of failed DNS lookups. +# This also sets the lower cache limit on positive lookups. +# Minimum value is 1 second, and it is not recommendable to go +# much below 10 seconds. +#Default: +# negative_dns_ttl 1 minutes + +# TAG: range_offset_limit size [acl acl...] +# usage: (size) [units] [[!]aclname] +# +# Sets an upper limit on how far (number of bytes) into the file +# a Range request may be to cause Squid to prefetch the whole file. +# If beyond this limit, Squid forwards the Range request as it is and +# the result is NOT cached. +# +# This is to stop a far ahead range request (lets say start at 17MB) +# from making Squid fetch the whole object up to that point before +# sending anything to the client. +# +# Multiple range_offset_limit lines may be specified, and they will +# be searched from top to bottom on each request until a match is found. +# The first match found will be used. If no line matches a request, the +# default limit of 0 bytes will be used. +# +# 'size' is the limit specified as a number of units. +# +# 'units' specifies whether to use bytes, KB, MB, etc. +# If no units are specified bytes are assumed. +# +# A size of 0 causes Squid to never fetch more than the +# client requested. (default) +# +# A size of 'none' causes Squid to always fetch the object from the +# beginning so it may cache the result. (2.0 style) +# +# 'aclname' is the name of a defined ACL. +# +# NP: Using 'none' as the byte value here will override any quick_abort settings +# that may otherwise apply to the range request. The range request will +# be fully fetched from start to finish regardless of the client +# actions. This affects bandwidth usage. +#Default: +# none + +# TAG: minimum_expiry_time (seconds) +# The minimum caching time according to (Expires - Date) +# headers Squid honors if the object can't be revalidated. +# The default is 60 seconds. +# +# In reverse proxy environments it might be desirable to honor +# shorter object lifetimes. It is most likely better to make +# your server return a meaningful Last-Modified header however. +# +# In ESI environments where page fragments often have short +# lifetimes, this will often be best set to 0. +#Default: +# minimum_expiry_time 60 seconds + +# TAG: store_avg_object_size (bytes) +# Average object size, used to estimate number of objects your +# cache can hold. The default is 13 KB. +# +# This is used to pre-seed the cache index memory allocation to +# reduce expensive reallocate operations while handling clients +# traffic. Too-large values may result in memory allocation during +# peak traffic, too-small values will result in wasted memory. +# +# Check the cache manager 'info' report metrics for the real +# object sizes seen by your Squid before tuning this. +#Default: +# store_avg_object_size 13 KB + +# TAG: store_objects_per_bucket +# Target number of objects per bucket in the store hash table. +# Lowering this value increases the total number of buckets and +# also the storage maintenance rate. The default is 20. +#Default: +# store_objects_per_bucket 20 + +# HTTP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: request_header_max_size (KB) +# This specifies the maximum size for HTTP headers in a request. +# Request headers are usually relatively small (about 512 bytes). +# Placing a limit on the request header size will catch certain +# bugs (for example with persistent connections) and possibly +# buffer-overflow or denial-of-service attacks. +#Default: +# request_header_max_size 64 KB + +# TAG: reply_header_max_size (KB) +# This specifies the maximum size for HTTP headers in a reply. +# Reply headers are usually relatively small (about 512 bytes). +# Placing a limit on the reply header size will catch certain +# bugs (for example with persistent connections) and possibly +# buffer-overflow or denial-of-service attacks. +#Default: +# reply_header_max_size 64 KB + +# TAG: request_body_max_size (bytes) +# This specifies the maximum size for an HTTP request body. +# In other words, the maximum size of a PUT/POST request. +# A user who attempts to send a request with a body larger +# than this limit receives an "Invalid Request" error message. +# If you set this parameter to a zero (the default), there will +# be no limit imposed. +# +# See also client_request_buffer_max_size for an alternative +# limitation on client uploads which can be configured. +#Default: +# No limit. + +# TAG: client_request_buffer_max_size (bytes) +# This specifies the maximum buffer size of a client request. +# It prevents squid eating too much memory when somebody uploads +# a large file. +#Default: +# client_request_buffer_max_size 512 KB + +# TAG: broken_posts +# A list of ACL elements which, if matched, causes Squid to send +# an extra CRLF pair after the body of a PUT/POST request. +# +# Some HTTP servers has broken implementations of PUT/POST, +# and rely on an extra CRLF pair sent by some WWW clients. +# +# Quote from RFC2616 section 4.1 on this matter: +# +# Note: certain buggy HTTP/1.0 client implementations generate an +# extra CRLF's after a POST request. To restate what is explicitly +# forbidden by the BNF, an HTTP/1.1 client must not preface or follow +# a request with an extra CRLF. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +#Example: +# acl buggy_server url_regex ^http://.... +# broken_posts allow buggy_server +#Default: +# Obey RFC 2616. + +# TAG: adaptation_uses_indirect_client on|off +# Controls whether the indirect client IP address (instead of the direct +# client IP address) is passed to adaptation services. +# +# See also: follow_x_forwarded_for adaptation_send_client_ip +#Default: +# adaptation_uses_indirect_client on + +# TAG: via on|off +# If set (default), Squid will include a Via header in requests and +# replies as required by RFC2616. +#Default: +# via on + +# TAG: ie_refresh on|off +# Microsoft Internet Explorer up until version 5.5 Service +# Pack 1 has an issue with transparent proxies, wherein it +# is impossible to force a refresh. Turning this on provides +# a partial fix to the problem, by causing all IMS-REFRESH +# requests from older IE versions to check the origin server +# for fresh content. This reduces hit ratio by some amount +# (~10% in my experience), but allows users to actually get +# fresh content when they want it. Note because Squid +# cannot tell if the user is using 5.5 or 5.5SP1, the behavior +# of 5.5 is unchanged from old versions of Squid (i.e. a +# forced refresh is impossible). Newer versions of IE will, +# hopefully, continue to have the new behavior and will be +# handled based on that assumption. This option defaults to +# the old Squid behavior, which is better for hit ratios but +# worse for clients using IE, if they need to be able to +# force fresh content. +#Default: +# ie_refresh off + +# TAG: vary_ignore_expire on|off +# Many HTTP servers supporting Vary gives such objects +# immediate expiry time with no cache-control header +# when requested by a HTTP/1.0 client. This option +# enables Squid to ignore such expiry times until +# HTTP/1.1 is fully implemented. +# +# WARNING: If turned on this may eventually cause some +# varying objects not intended for caching to get cached. +#Default: +# vary_ignore_expire off + +# TAG: request_entities +# Squid defaults to deny GET and HEAD requests with request entities, +# as the meaning of such requests are undefined in the HTTP standard +# even if not explicitly forbidden. +# +# Set this directive to on if you have clients which insists +# on sending request entities in GET or HEAD requests. But be warned +# that there is server software (both proxies and web servers) which +# can fail to properly process this kind of request which may make you +# vulnerable to cache pollution attacks if enabled. +#Default: +# request_entities off + +# TAG: request_header_access +# Usage: request_header_access header_name allow|deny [!]aclname ... +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +# +# This option replaces the old 'anonymize_headers' and the +# older 'http_anonymizer' option with something that is much +# more configurable. A list of ACLs for each header name allows +# removal of specific header fields under specific conditions. +# +# This option only applies to outgoing HTTP request headers (i.e., +# headers sent by Squid to the next HTTP hop such as a cache peer +# or an origin server). The option has no effect during cache hit +# detection. The equivalent adaptation vectoring point in ICAP +# terminology is post-cache REQMOD. +# +# The option is applied to individual outgoing request header +# fields. For each request header field F, Squid uses the first +# qualifying sets of request_header_access rules: +# +# 1. Rules with header_name equal to F's name. +# 2. Rules with header_name 'Other', provided F's name is not +# on the hard-coded list of commonly used HTTP header names. +# 3. Rules with header_name 'All'. +# +# Within that qualifying rule set, rule ACLs are checked as usual. +# If ACLs of an "allow" rule match, the header field is allowed to +# go through as is. If ACLs of a "deny" rule match, the header is +# removed and request_header_replace is then checked to identify +# if the removed header has a replacement. If no rules within the +# set have matching ACLs, the header field is left as is. +# +# For example, to achieve the same behavior as the old +# 'http_anonymizer standard' option, you should use: +# +# request_header_access From deny all +# request_header_access Referer deny all +# request_header_access User-Agent deny all +# +# Or, to reproduce the old 'http_anonymizer paranoid' feature +# you should use: +# +# request_header_access Authorization allow all +# request_header_access Proxy-Authorization allow all +# request_header_access Cache-Control allow all +# request_header_access Content-Length allow all +# request_header_access Content-Type allow all +# request_header_access Date allow all +# request_header_access Host allow all +# request_header_access If-Modified-Since allow all +# request_header_access Pragma allow all +# request_header_access Accept allow all +# request_header_access Accept-Charset allow all +# request_header_access Accept-Encoding allow all +# request_header_access Accept-Language allow all +# request_header_access Connection allow all +# request_header_access All deny all +# +# HTTP reply headers are controlled with the reply_header_access directive. +# +# By default, all headers are allowed (no anonymizing is performed). +#Default: +# No limits. + +# TAG: reply_header_access +# Usage: reply_header_access header_name allow|deny [!]aclname ... +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +# +# This option only applies to reply headers, i.e., from the +# server to the client. +# +# This is the same as request_header_access, but in the other +# direction. Please see request_header_access for detailed +# documentation. +# +# For example, to achieve the same behavior as the old +# 'http_anonymizer standard' option, you should use: +# +# reply_header_access Server deny all +# reply_header_access WWW-Authenticate deny all +# reply_header_access Link deny all +# +# Or, to reproduce the old 'http_anonymizer paranoid' feature +# you should use: +# +# reply_header_access Allow allow all +# reply_header_access WWW-Authenticate allow all +# reply_header_access Proxy-Authenticate allow all +# reply_header_access Cache-Control allow all +# reply_header_access Content-Encoding allow all +# reply_header_access Content-Length allow all +# reply_header_access Content-Type allow all +# reply_header_access Date allow all +# reply_header_access Expires allow all +# reply_header_access Last-Modified allow all +# reply_header_access Location allow all +# reply_header_access Pragma allow all +# reply_header_access Content-Language allow all +# reply_header_access Retry-After allow all +# reply_header_access Title allow all +# reply_header_access Content-Disposition allow all +# reply_header_access Connection allow all +# reply_header_access All deny all +# +# HTTP request headers are controlled with the request_header_access directive. +# +# By default, all headers are allowed (no anonymizing is +# performed). +#Default: +# No limits. + +# TAG: request_header_replace +# Usage: request_header_replace header_name message +# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit) +# +# This option allows you to change the contents of headers +# denied with request_header_access above, by replacing them +# with some fixed string. +# +# This only applies to request headers, not reply headers. +# +# By default, headers are removed if denied. +#Default: +# none + +# TAG: reply_header_replace +# Usage: reply_header_replace header_name message +# Example: reply_header_replace Server Foo/1.0 +# +# This option allows you to change the contents of headers +# denied with reply_header_access above, by replacing them +# with some fixed string. +# +# This only applies to reply headers, not request headers. +# +# By default, headers are removed if denied. +#Default: +# none + +# TAG: request_header_add +# Usage: request_header_add field-name field-value acl1 [acl2] ... +# Example: request_header_add X-Client-CA "CA=%ssl::>cert_issuer" all +# +# This option adds header fields to outgoing HTTP requests (i.e., +# request headers sent by Squid to the next HTTP hop such as a +# cache peer or an origin server). The option has no effect during +# cache hit detection. The equivalent adaptation vectoring point +# in ICAP terminology is post-cache REQMOD. +# +# Field-name is a token specifying an HTTP header name. If a +# standard HTTP header name is used, Squid does not check whether +# the new header conflicts with any existing headers or violates +# HTTP rules. If the request to be modified already contains a +# field with the same name, the old field is preserved but the +# header field values are not merged. +# +# Field-value is either a token or a quoted string. If quoted +# string format is used, then the surrounding quotes are removed +# while escape sequences and %macros are processed. +# +# In theory, all of the logformat codes can be used as %macros. +# However, unlike logging (which happens at the very end of +# transaction lifetime), the transaction may not yet have enough +# information to expand a macro when the new header value is needed. +# And some information may already be available to Squid but not yet +# committed where the macro expansion code can access it (report +# such instances!). The macro will be expanded into a single dash +# ('-') in such cases. Not all macros have been tested. +# +# One or more Squid ACLs may be specified to restrict header +# injection to matching requests. As always in squid.conf, all +# ACLs in an option ACL list must be satisfied for the insertion +# to happen. The request_header_add option supports fast ACLs +# only. +#Default: +# none + +# TAG: note +# This option used to log custom information about the master +# transaction. For example, an admin may configure Squid to log +# which "user group" the transaction belongs to, where "user group" +# will be determined based on a set of ACLs and not [just] +# authentication information. +# Values of key/value pairs can be logged using %{key}note macros: +# +# note key value acl ... +# logformat myFormat ... %{key}note ... +#Default: +# none + +# TAG: relaxed_header_parser on|off|warn +# In the default "on" setting Squid accepts certain forms +# of non-compliant HTTP messages where it is unambiguous +# what the sending application intended even if the message +# is not correctly formatted. The messages is then normalized +# to the correct form when forwarded by Squid. +# +# If set to "warn" then a warning will be emitted in cache.log +# each time such HTTP error is encountered. +# +# If set to "off" then such HTTP errors will cause the request +# or response to be rejected. +#Default: +# relaxed_header_parser on + +# TAG: collapsed_forwarding (on|off) +# When enabled, instead of forwarding each concurrent request for +# the same URL, Squid just sends the first of them. The other, so +# called "collapsed" requests, wait for the response to the first +# request and, if it happens to be cachable, use that response. +# Here, "concurrent requests" means "received after the first +# request headers were parsed and before the corresponding response +# headers were parsed". +# +# This feature is disabled by default: enabling collapsed +# forwarding needlessly delays forwarding requests that look +# cachable (when they are collapsed) but then need to be forwarded +# individually anyway because they end up being for uncachable +# content. However, in some cases, such as acceleration of highly +# cachable content with periodic or grouped expiration times, the +# gains from collapsing [large volumes of simultaneous refresh +# requests] outweigh losses from such delays. +# +# Squid collapses two kinds of requests: regular client requests +# received on one of the listening ports and internal "cache +# revalidation" requests which are triggered by those regular +# requests hitting a stale cached object. Revalidation collapsing +# is currently disabled for Squid instances containing SMP-aware +# disk or memory caches and for Vary-controlled cached objects. +#Default: +# collapsed_forwarding off + +# TIMEOUTS +# ----------------------------------------------------------------------------- + +# TAG: forward_timeout time-units +# This parameter specifies how long Squid should at most attempt in +# finding a forwarding path for the request before giving up. +#Default: +# forward_timeout 4 minutes + +# TAG: connect_timeout time-units +# This parameter specifies how long to wait for the TCP connect to +# the requested server or peer to complete before Squid should +# attempt to find another path where to forward the request. +#Default: +# connect_timeout 1 minute + +# TAG: peer_connect_timeout time-units +# This parameter specifies how long to wait for a pending TCP +# connection to a peer cache. The default is 30 seconds. You +# may also set different timeout values for individual neighbors +# with the 'connect-timeout' option on a 'cache_peer' line. +#Default: +# peer_connect_timeout 30 seconds + +# TAG: read_timeout time-units +# Applied on peer server connections. +# +# After each successful read(), the timeout will be extended by this +# amount. If no data is read again after this amount of time, +# the request is aborted and logged with ERR_READ_TIMEOUT. +# +# The default is 15 minutes. +#Default: +# read_timeout 15 minutes + +# TAG: write_timeout time-units +# This timeout is tracked for all connections that have data +# available for writing and are waiting for the socket to become +# ready. After each successful write, the timeout is extended by +# the configured amount. If Squid has data to write but the +# connection is not ready for the configured duration, the +# transaction associated with the connection is terminated. The +# default is 15 minutes. +#Default: +# write_timeout 15 minutes + +# TAG: request_timeout +# How long to wait for complete HTTP request headers after initial +# connection establishment. +#Default: +# request_timeout 5 minutes + +# TAG: client_idle_pconn_timeout +# How long to wait for the next HTTP request on a persistent +# client connection after the previous request completes. +#Default: +# client_idle_pconn_timeout 2 minutes + +# TAG: ftp_client_idle_timeout +# How long to wait for an FTP request on a connection to Squid ftp_port. +# Many FTP clients do not deal with idle connection closures well, +# necessitating a longer default timeout than client_idle_pconn_timeout +# used for incoming HTTP requests. +#Default: +# ftp_client_idle_timeout 30 minutes + +# TAG: client_lifetime time-units +# The maximum amount of time a client (browser) is allowed to +# remain connected to the cache process. This protects the Cache +# from having a lot of sockets (and hence file descriptors) tied up +# in a CLOSE_WAIT state from remote clients that go away without +# properly shutting down (either because of a network failure or +# because of a poor client implementation). The default is one +# day, 1440 minutes. +# +# NOTE: The default value is intended to be much larger than any +# client would ever need to be connected to your cache. You +# should probably change client_lifetime only as a last resort. +# If you seem to have many client connections tying up +# filedescriptors, we recommend first tuning the read_timeout, +# request_timeout, persistent_request_timeout and quick_abort values. +#Default: +# client_lifetime 1 day + +# TAG: half_closed_clients +# Some clients may shutdown the sending side of their TCP +# connections, while leaving their receiving sides open. Sometimes, +# Squid can not tell the difference between a half-closed and a +# fully-closed TCP connection. +# +# By default, Squid will immediately close client connections when +# read(2) returns "no more data to read." +# +# Change this option to 'on' and Squid will keep open connections +# until a read(2) or write(2) on the socket returns an error. +# This may show some benefits for reverse proxies. But if not +# it is recommended to leave OFF. +#Default: +# half_closed_clients off + +# TAG: server_idle_pconn_timeout +# Timeout for idle persistent connections to servers and other +# proxies. +#Default: +# server_idle_pconn_timeout 1 minute + +# TAG: ident_timeout +# Maximum time to wait for IDENT lookups to complete. +# +# If this is too high, and you enabled IDENT lookups from untrusted +# users, you might be susceptible to denial-of-service by having +# many ident requests going at once. +#Default: +# ident_timeout 10 seconds + +# TAG: shutdown_lifetime time-units +# When SIGTERM or SIGHUP is received, the cache is put into +# "shutdown pending" mode until all active sockets are closed. +# This value is the lifetime to set for all open descriptors +# during shutdown mode. Any active clients after this many +# seconds will receive a 'timeout' message. +#Default: +# shutdown_lifetime 30 seconds + +# ADMINISTRATIVE PARAMETERS +# ----------------------------------------------------------------------------- + +# TAG: cache_mgr +# Email-address of local cache manager who will receive +# mail if the cache dies. The default is "webmaster". +#Default: +# cache_mgr webmaster + +# TAG: mail_from +# From: email-address for mail sent when the cache dies. +# The default is to use 'squid@unique_hostname'. +# +# See also: unique_hostname directive. +#Default: +# none + +# TAG: mail_program +# Email program used to send mail if the cache dies. +# The default is "mail". The specified program must comply +# with the standard Unix mail syntax: +# mail-program recipient < mailfile +# +# Optional command line options can be specified. +#Default: +# mail_program mail + +# TAG: cache_effective_user +# If you start Squid as root, it will change its effective/real +# UID/GID to the user specified below. The default is to change +# to UID of proxy. +# see also; cache_effective_group +#Default: +# cache_effective_user proxy + +# TAG: cache_effective_group +# Squid sets the GID to the effective user's default group ID +# (taken from the password file) and supplementary group list +# from the groups membership. +# +# If you want Squid to run with a specific GID regardless of +# the group memberships of the effective user then set this +# to the group (or GID) you want Squid to run as. When set +# all other group privileges of the effective user are ignored +# and only this GID is effective. If Squid is not started as +# root the user starting Squid MUST be member of the specified +# group. +# +# This option is not recommended by the Squid Team. +# Our preference is for administrators to configure a secure +# user account for squid with UID/GID matching system policies. +#Default: +# Use system group memberships of the cache_effective_user account + +# TAG: httpd_suppress_version_string on|off +# Suppress Squid version string info in HTTP headers and HTML error pages. +#Default: +# httpd_suppress_version_string off + +# TAG: visible_hostname +# If you want to present a special hostname in error messages, etc, +# define this. Otherwise, the return value of gethostname() +# will be used. If you have multiple caches in a cluster and +# get errors about IP-forwarding you must set them to have individual +# names with this setting. +#Default: +# Automatically detect the system host name + +# TAG: unique_hostname +# If you want to have multiple machines with the same +# 'visible_hostname' you must give each machine a different +# 'unique_hostname' so forwarding loops can be detected. +#Default: +# Copy the value from visible_hostname + +# TAG: hostname_aliases +# A list of other DNS names your cache has. +#Default: +# none + +# TAG: umask +# Minimum umask which should be enforced while the proxy +# is running, in addition to the umask set at startup. +# +# For a traditional octal representation of umasks, start +# your value with 0. +#Default: +# umask 027 + +# OPTIONS FOR THE CACHE REGISTRATION SERVICE +# ----------------------------------------------------------------------------- +# +# This section contains parameters for the (optional) cache +# announcement service. This service is provided to help +# cache administrators locate one another in order to join or +# create cache hierarchies. +# +# An 'announcement' message is sent (via UDP) to the registration +# service by Squid. By default, the announcement message is NOT +# SENT unless you enable it with 'announce_period' below. +# +# The announcement message includes your hostname, plus the +# following information from this configuration file: +# +# http_port +# icp_port +# cache_mgr +# +# All current information is processed regularly and made +# available on the Web at http://www.ircache.net/Cache/Tracker/. + +# TAG: announce_period +# This is how frequently to send cache announcements. +# +# To enable announcing your cache, just set an announce period. +# +# Example: +# announce_period 1 day +#Default: +# Announcement messages disabled. + +# TAG: announce_host +# Set the hostname where announce registration messages will be sent. +# +# See also announce_port and announce_file +#Default: +# announce_host tracker.ircache.net + +# TAG: announce_file +# The contents of this file will be included in the announce +# registration messages. +#Default: +# none + +# TAG: announce_port +# Set the port where announce registration messages will be sent. +# +# See also announce_host and announce_file +#Default: +# announce_port 3131 + +# HTTPD-ACCELERATOR OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: httpd_accel_surrogate_id +# Surrogates (http://www.esi.org/architecture_spec_1.0.html) +# need an identification token to allow control targeting. Because +# a farm of surrogates may all perform the same tasks, they may share +# an identification token. +#Default: +# visible_hostname is used if no specific ID is set. + +# TAG: http_accel_surrogate_remote on|off +# Remote surrogates (such as those in a CDN) honour the header +# "Surrogate-Control: no-store-remote". +# +# Set this to on to have squid behave as a remote surrogate. +#Default: +# http_accel_surrogate_remote off + +# TAG: esi_parser libxml2|expat|custom +# ESI markup is not strictly XML compatible. The custom ESI parser +# will give higher performance, but cannot handle non ASCII character +# encodings. +#Default: +# esi_parser custom + +# DELAY POOL PARAMETERS +# ----------------------------------------------------------------------------- + +# TAG: delay_pools +# This represents the number of delay pools to be used. For example, +# if you have one class 2 delay pool and one class 3 delays pool, you +# have a total of 2 delay pools. +# +# See also delay_parameters, delay_class, delay_access for pool +# configuration details. +#Default: +# delay_pools 0 + +# TAG: delay_class +# This defines the class of each delay pool. There must be exactly one +# delay_class line for each delay pool. For example, to define two +# delay pools, one of class 2 and one of class 3, the settings above +# and here would be: +# +# Example: +# delay_pools 4 # 4 delay pools +# delay_class 1 2 # pool 1 is a class 2 pool +# delay_class 2 3 # pool 2 is a class 3 pool +# delay_class 3 4 # pool 3 is a class 4 pool +# delay_class 4 5 # pool 4 is a class 5 pool +# +# The delay pool classes are: +# +# class 1 Everything is limited by a single aggregate +# bucket. +# +# class 2 Everything is limited by a single aggregate +# bucket as well as an "individual" bucket chosen +# from bits 25 through 32 of the IPv4 address. +# +# class 3 Everything is limited by a single aggregate +# bucket as well as a "network" bucket chosen +# from bits 17 through 24 of the IP address and a +# "individual" bucket chosen from bits 17 through +# 32 of the IPv4 address. +# +# class 4 Everything in a class 3 delay pool, with an +# additional limit on a per user basis. This +# only takes effect if the username is established +# in advance - by forcing authentication in your +# http_access rules. +# +# class 5 Requests are grouped according their tag (see +# external_acl's tag= reply). +# +# +# Each pool also requires a delay_parameters directive to configure the pool size +# and speed limits used whenever the pool is applied to a request. Along with +# a set of delay_access directives to determine when it is used. +# +# NOTE: If an IP address is a.b.c.d +# -> bits 25 through 32 are "d" +# -> bits 17 through 24 are "c" +# -> bits 17 through 32 are "c * 256 + d" +# +# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to +# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# See also delay_parameters and delay_access. +#Default: +# none + +# TAG: delay_access +# This is used to determine which delay pool a request falls into. +# +# delay_access is sorted per pool and the matching starts with pool 1, +# then pool 2, ..., and finally pool N. The first delay pool where the +# request is allowed is selected for the request. If it does not allow +# the request to any pool then the request is not delayed (default). +# +# For example, if you want some_big_clients in delay +# pool 1 and lotsa_little_clients in delay pool 2: +# +# delay_access 1 allow some_big_clients +# delay_access 1 deny all +# delay_access 2 allow lotsa_little_clients +# delay_access 2 deny all +# delay_access 3 allow authenticated_clients +# +# See also delay_parameters and delay_class. +# +#Default: +# Deny using the pool, unless allow rules exist in squid.conf for the pool. + +# TAG: delay_parameters +# This defines the parameters for a delay pool. Each delay pool has +# a number of "buckets" associated with it, as explained in the +# description of delay_class. +# +# For a class 1 delay pool, the syntax is: +# delay_class pool 1 +# delay_parameters pool aggregate +# +# For a class 2 delay pool: +# delay_class pool 2 +# delay_parameters pool aggregate individual +# +# For a class 3 delay pool: +# delay_class pool 3 +# delay_parameters pool aggregate network individual +# +# For a class 4 delay pool: +# delay_class pool 4 +# delay_parameters pool aggregate network individual user +# +# For a class 5 delay pool: +# delay_class pool 5 +# delay_parameters pool tagrate +# +# The option variables are: +# +# pool a pool number - ie, a number between 1 and the +# number specified in delay_pools as used in +# delay_class lines. +# +# aggregate the speed limit parameters for the aggregate bucket +# (class 1, 2, 3). +# +# individual the speed limit parameters for the individual +# buckets (class 2, 3). +# +# network the speed limit parameters for the network buckets +# (class 3). +# +# user the speed limit parameters for the user buckets +# (class 4). +# +# tagrate the speed limit parameters for the tag buckets +# (class 5). +# +# A pair of delay parameters is written restore/maximum, where restore is +# the number of bytes (not bits - modem and network speeds are usually +# quoted in bits) per second placed into the bucket, and maximum is the +# maximum number of bytes which can be in the bucket at any time. +# +# There must be one delay_parameters line for each delay pool. +# +# +# For example, if delay pool number 1 is a class 2 delay pool as in the +# above example, and is being used to strictly limit each host to 64Kbit/sec +# (plus overheads), with no overall limit, the line is: +# +# delay_parameters 1 none 8000/8000 +# +# Note that 8 x 8K Byte/sec -> 64K bit/sec. +# +# Note that the word 'none' is used to represent no limit. +# +# +# And, if delay pool number 2 is a class 3 delay pool as in the above +# example, and you want to limit it to a total of 256Kbit/sec (strict limit) +# with each 8-bit network permitted 64Kbit/sec (strict limit) and each +# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits +# to permit a decent web page to be downloaded at a decent speed +# (if the network is not being limited due to overuse) but slow down +# large downloads more significantly: +# +# delay_parameters 2 32000/32000 8000/8000 600/8000 +# +# Note that 8 x 32K Byte/sec -> 256K bit/sec. +# 8 x 8K Byte/sec -> 64K bit/sec. +# 8 x 600 Byte/sec -> 4800 bit/sec. +# +# +# Finally, for a class 4 delay pool as in the example - each user will +# be limited to 128Kbits/sec no matter how many workstations they are logged into.: +# +# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000 +# +# +# See also delay_class and delay_access. +# +#Default: +# none + +# TAG: delay_initial_bucket_level (percent, 0-100) +# The initial bucket percentage is used to determine how much is put +# in each bucket when squid starts, is reconfigured, or first notices +# a host accessing it (in class 2 and class 3, individual hosts and +# networks only have buckets associated with them once they have been +# "seen" by squid). +#Default: +# delay_initial_bucket_level 50 + +# CLIENT DELAY POOL PARAMETERS +# ----------------------------------------------------------------------------- + +# TAG: client_delay_pools +# This option specifies the number of client delay pools used. It must +# preceed other client_delay_* options. +# +# Example: +# client_delay_pools 2 +# +# See also client_delay_parameters and client_delay_access. +#Default: +# client_delay_pools 0 + +# TAG: client_delay_initial_bucket_level (percent, 0-no_limit) +# This option determines the initial bucket size as a percentage of +# max_bucket_size from client_delay_parameters. Buckets are created +# at the time of the "first" connection from the matching IP. Idle +# buckets are periodically deleted up. +# +# You can specify more than 100 percent but note that such "oversized" +# buckets are not refilled until their size goes down to max_bucket_size +# from client_delay_parameters. +# +# Example: +# client_delay_initial_bucket_level 50 +#Default: +# client_delay_initial_bucket_level 50 + +# TAG: client_delay_parameters +# +# This option configures client-side bandwidth limits using the +# following format: +# +# client_delay_parameters pool speed_limit max_bucket_size +# +# pool is an integer ID used for client_delay_access matching. +# +# speed_limit is bytes added to the bucket per second. +# +# max_bucket_size is the maximum size of a bucket, enforced after any +# speed_limit additions. +# +# Please see the delay_parameters option for more information and +# examples. +# +# Example: +# client_delay_parameters 1 1024 2048 +# client_delay_parameters 2 51200 16384 +# +# See also client_delay_access. +# +#Default: +# none + +# TAG: client_delay_access +# This option determines the client-side delay pool for the +# request: +# +# client_delay_access pool_ID allow|deny acl_name +# +# All client_delay_access options are checked in their pool ID +# order, starting with pool 1. The first checked pool with allowed +# request is selected for the request. If no ACL matches or there +# are no client_delay_access options, the request bandwidth is not +# limited. +# +# The ACL-selected pool is then used to find the +# client_delay_parameters for the request. Client-side pools are +# not used to aggregate clients. Clients are always aggregated +# based on their source IP addresses (one bucket per source IP). +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# Additionally, only the client TCP connection details are available. +# ACLs testing HTTP properties will not work. +# +# Please see delay_access for more examples. +# +# Example: +# client_delay_access 1 allow low_rate_network +# client_delay_access 2 allow vips_network +# +# +# See also client_delay_parameters and client_delay_pools. +#Default: +# Deny use of the pool, unless allow rules exist in squid.conf for the pool. + +# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: wccp_router +# Use this option to define your WCCP ``home'' router for +# Squid. +# +# wccp_router supports a single WCCP(v1) router +# +# wccp2_router supports multiple WCCPv2 routers +# +# only one of the two may be used at the same time and defines +# which version of WCCP to use. +#Default: +# WCCP disabled. + +# TAG: wccp2_router +# Use this option to define your WCCP ``home'' router for +# Squid. +# +# wccp_router supports a single WCCP(v1) router +# +# wccp2_router supports multiple WCCPv2 routers +# +# only one of the two may be used at the same time and defines +# which version of WCCP to use. +#Default: +# WCCPv2 disabled. + +# TAG: wccp_version +# This directive is only relevant if you need to set up WCCP(v1) +# to some very old and end-of-life Cisco routers. In all other +# setups it must be left unset or at the default setting. +# It defines an internal version in the WCCP(v1) protocol, +# with version 4 being the officially documented protocol. +# +# According to some users, Cisco IOS 11.2 and earlier only +# support WCCP version 3. If you're using that or an earlier +# version of IOS, you may need to change this value to 3, otherwise +# do not specify this parameter. +#Default: +# wccp_version 4 + +# TAG: wccp2_rebuild_wait +# If this is enabled Squid will wait for the cache dir rebuild to finish +# before sending the first wccp2 HereIAm packet +#Default: +# wccp2_rebuild_wait on + +# TAG: wccp2_forwarding_method +# WCCP2 allows the setting of forwarding methods between the +# router/switch and the cache. Valid values are as follows: +# +# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) +# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) +# +# Currently (as of IOS 12.4) cisco routers only support GRE. +# Cisco switches only support the L2 redirect assignment method. +#Default: +# wccp2_forwarding_method gre + +# TAG: wccp2_return_method +# WCCP2 allows the setting of return methods between the +# router/switch and the cache for packets that the cache +# decides not to handle. Valid values are as follows: +# +# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) +# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) +# +# Currently (as of IOS 12.4) cisco routers only support GRE. +# Cisco switches only support the L2 redirect assignment. +# +# If the "ip wccp redirect exclude in" command has been +# enabled on the cache interface, then it is still safe for +# the proxy server to use a l2 redirect method even if this +# option is set to GRE. +#Default: +# wccp2_return_method gre + +# TAG: wccp2_assignment_method +# WCCP2 allows the setting of methods to assign the WCCP hash +# Valid values are as follows: +# +# hash - Hash assignment +# mask - Mask assignment +# +# As a general rule, cisco routers support the hash assignment method +# and cisco switches support the mask assignment method. +#Default: +# wccp2_assignment_method hash + +# TAG: wccp2_service +# WCCP2 allows for multiple traffic services. There are two +# types: "standard" and "dynamic". The standard type defines +# one service id - http (id 0). The dynamic service ids can be from +# 51 to 255 inclusive. In order to use a dynamic service id +# one must define the type of traffic to be redirected; this is done +# using the wccp2_service_info option. +# +# The "standard" type does not require a wccp2_service_info option, +# just specifying the service id will suffice. +# +# MD5 service authentication can be enabled by adding +# "password=" to the end of this service declaration. +# +# Examples: +# +# wccp2_service standard 0 # for the 'web-cache' standard service +# wccp2_service dynamic 80 # a dynamic service type which will be +# # fleshed out with subsequent options. +# wccp2_service standard 0 password=foo +#Default: +# Use the 'web-cache' standard service. + +# TAG: wccp2_service_info +# Dynamic WCCPv2 services require further information to define the +# traffic you wish to have diverted. +# +# The format is: +# +# wccp2_service_info protocol= flags=,.. +# priority= ports=,.. +# +# The relevant WCCPv2 flags: +# + src_ip_hash, dst_ip_hash +# + source_port_hash, dst_port_hash +# + src_ip_alt_hash, dst_ip_alt_hash +# + src_port_alt_hash, dst_port_alt_hash +# + ports_source +# +# The port list can be one to eight entries. +# +# Example: +# +# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source +# priority=240 ports=80 +# +# Note: the service id must have been defined by a previous +# 'wccp2_service dynamic ' entry. +#Default: +# none + +# TAG: wccp2_weight +# Each cache server gets assigned a set of the destination +# hash proportional to their weight. +#Default: +# wccp2_weight 10000 + +# TAG: wccp_address +# Use this option if you require WCCPv2 to use a specific +# interface address. +# +# The default behavior is to not bind to any specific address. +#Default: +# Address selected by the operating system. + +# TAG: wccp2_address +# Use this option if you require WCCP to use a specific +# interface address. +# +# The default behavior is to not bind to any specific address. +#Default: +# Address selected by the operating system. + +# PERSISTENT CONNECTION HANDLING +# ----------------------------------------------------------------------------- +# +# Also see "pconn_timeout" in the TIMEOUTS section + +# TAG: client_persistent_connections +# Persistent connection support for clients. +# Squid uses persistent connections (when allowed). You can use +# this option to disable persistent connections with clients. +#Default: +# client_persistent_connections on + +# TAG: server_persistent_connections +# Persistent connection support for servers. +# Squid uses persistent connections (when allowed). You can use +# this option to disable persistent connections with servers. +#Default: +# server_persistent_connections on + +# TAG: persistent_connection_after_error +# With this directive the use of persistent connections after +# HTTP errors can be disabled. Useful if you have clients +# who fail to handle errors on persistent connections proper. +#Default: +# persistent_connection_after_error on + +# TAG: detect_broken_pconn +# Some servers have been found to incorrectly signal the use +# of HTTP/1.0 persistent connections even on replies not +# compatible, causing significant delays. This server problem +# has mostly been seen on redirects. +# +# By enabling this directive Squid attempts to detect such +# broken replies and automatically assume the reply is finished +# after 10 seconds timeout. +#Default: +# detect_broken_pconn off + +# CACHE DIGEST OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: digest_generation +# This controls whether the server will generate a Cache Digest +# of its contents. By default, Cache Digest generation is +# enabled if Squid is compiled with --enable-cache-digests defined. +#Default: +# digest_generation on + +# TAG: digest_bits_per_entry +# This is the number of bits of the server's Cache Digest which +# will be associated with the Digest entry for a given HTTP +# Method and URL (public key) combination. The default is 5. +#Default: +# digest_bits_per_entry 5 + +# TAG: digest_rebuild_period (seconds) +# This is the wait time between Cache Digest rebuilds. +#Default: +# digest_rebuild_period 1 hour + +# TAG: digest_rewrite_period (seconds) +# This is the wait time between Cache Digest writes to +# disk. +#Default: +# digest_rewrite_period 1 hour + +# TAG: digest_swapout_chunk_size (bytes) +# This is the number of bytes of the Cache Digest to write to +# disk at a time. It defaults to 4096 bytes (4KB), the Squid +# default swap page. +#Default: +# digest_swapout_chunk_size 4096 bytes + +# TAG: digest_rebuild_chunk_percentage (percent, 0-100) +# This is the percentage of the Cache Digest to be scanned at a +# time. By default it is set to 10% of the Cache Digest. +#Default: +# digest_rebuild_chunk_percentage 10 + +# SNMP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: snmp_port +# The port number where Squid listens for SNMP requests. To enable +# SNMP support set this to a suitable port number. Port number +# 3401 is often used for the Squid SNMP agent. By default it's +# set to "0" (disabled) +# +# Example: +# snmp_port 3401 +#Default: +# SNMP disabled. + +# TAG: snmp_access +# Allowing or denying access to the SNMP port. +# +# All access to the agent is denied by default. +# usage: +# +# snmp_access allow|deny [!]aclname ... +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +#Example: +# snmp_access allow snmppublic localhost +# snmp_access deny all +#Default: +# Deny, unless rules exist in squid.conf. + +# TAG: snmp_incoming_address +# Just like 'udp_incoming_address', but for the SNMP port. +# +# snmp_incoming_address is used for the SNMP socket receiving +# messages from SNMP agents. +# +# The default snmp_incoming_address is to listen on all +# available network interfaces. +#Default: +# Accept SNMP packets from all machine interfaces. + +# TAG: snmp_outgoing_address +# Just like 'udp_outgoing_address', but for the SNMP port. +# +# snmp_outgoing_address is used for SNMP packets returned to SNMP +# agents. +# +# If snmp_outgoing_address is not set it will use the same socket +# as snmp_incoming_address. Only change this if you want to have +# SNMP replies sent using another address than where this Squid +# listens for SNMP queries. +# +# NOTE, snmp_incoming_address and snmp_outgoing_address can not have +# the same value since they both use the same port. +#Default: +# Use snmp_incoming_address or an address selected by the operating system. + +# ICP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icp_port +# The port number where Squid sends and receives ICP queries to +# and from neighbor caches. The standard UDP port for ICP is 3130. +# +# Example: +# icp_port 3130 +#Default: +# ICP disabled. + +# TAG: htcp_port +# The port number where Squid sends and receives HTCP queries to +# and from neighbor caches. To turn it on you want to set it to +# 4827. +# +# Example: +# htcp_port 4827 +#Default: +# HTCP disabled. + +# TAG: log_icp_queries on|off +# If set, ICP queries are logged to access.log. You may wish +# do disable this if your ICP load is VERY high to speed things +# up or to simplify log analysis. +#Default: +# log_icp_queries on + +# TAG: udp_incoming_address +# udp_incoming_address is used for UDP packets received from other +# caches. +# +# The default behavior is to not bind to any specific address. +# +# Only change this if you want to have all UDP queries received on +# a specific interface/address. +# +# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS +# modules. Altering it will affect all of them in the same manner. +# +# see also; udp_outgoing_address +# +# NOTE, udp_incoming_address and udp_outgoing_address can not +# have the same value since they both use the same port. +#Default: +# Accept packets from all machine interfaces. + +# TAG: udp_outgoing_address +# udp_outgoing_address is used for UDP packets sent out to other +# caches. +# +# The default behavior is to not bind to any specific address. +# +# Instead it will use the same socket as udp_incoming_address. +# Only change this if you want to have UDP queries sent using another +# address than where this Squid listens for UDP queries from other +# caches. +# +# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS +# modules. Altering it will affect all of them in the same manner. +# +# see also; udp_incoming_address +# +# NOTE, udp_incoming_address and udp_outgoing_address can not +# have the same value since they both use the same port. +#Default: +# Use udp_incoming_address or an address selected by the operating system. + +# TAG: icp_hit_stale on|off +# If you want to return ICP_HIT for stale cache objects, set this +# option to 'on'. If you have sibling relationships with caches +# in other administrative domains, this should be 'off'. If you only +# have sibling relationships with caches under your control, +# it is probably okay to set this to 'on'. +# If set to 'on', your siblings should use the option "allow-miss" +# on their cache_peer lines for connecting to you. +#Default: +# icp_hit_stale off + +# TAG: minimum_direct_hops +# If using the ICMP pinging stuff, do direct fetches for sites +# which are no more than this many hops away. +#Default: +# minimum_direct_hops 4 + +# TAG: minimum_direct_rtt (msec) +# If using the ICMP pinging stuff, do direct fetches for sites +# which are no more than this many rtt milliseconds away. +#Default: +# minimum_direct_rtt 400 + +# TAG: netdb_low +# The low water mark for the ICMP measurement database. +# +# Note: high watermark controlled by netdb_high directive. +# +# These watermarks are counts, not percents. The defaults are +# (low) 900 and (high) 1000. When the high water mark is +# reached, database entries will be deleted until the low +# mark is reached. +#Default: +# netdb_low 900 + +# TAG: netdb_high +# The high water mark for the ICMP measurement database. +# +# Note: low watermark controlled by netdb_low directive. +# +# These watermarks are counts, not percents. The defaults are +# (low) 900 and (high) 1000. When the high water mark is +# reached, database entries will be deleted until the low +# mark is reached. +#Default: +# netdb_high 1000 + +# TAG: netdb_ping_period +# The minimum period for measuring a site. There will be at +# least this much delay between successive pings to the same +# network. The default is five minutes. +#Default: +# netdb_ping_period 5 minutes + +# TAG: query_icmp on|off +# If you want to ask your peers to include ICMP data in their ICP +# replies, enable this option. +# +# If your peer has configured Squid (during compilation) with +# '--enable-icmp' that peer will send ICMP pings to origin server +# sites of the URLs it receives. If you enable this option the +# ICP replies from that peer will include the ICMP data (if available). +# Then, when choosing a parent cache, Squid will choose the parent with +# the minimal RTT to the origin server. When this happens, the +# hierarchy field of the access.log will be +# "CLOSEST_PARENT_MISS". This option is off by default. +#Default: +# query_icmp off + +# TAG: test_reachability on|off +# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH +# instead of ICP_MISS if the target host is NOT in the ICMP +# database, or has a zero RTT. +#Default: +# test_reachability off + +# TAG: icp_query_timeout (msec) +# Normally Squid will automatically determine an optimal ICP +# query timeout value based on the round-trip-time of recent ICP +# queries. If you want to override the value determined by +# Squid, set this 'icp_query_timeout' to a non-zero value. This +# value is specified in MILLISECONDS, so, to use a 2-second +# timeout (the old default), you would write: +# +# icp_query_timeout 2000 +#Default: +# Dynamic detection. + +# TAG: maximum_icp_query_timeout (msec) +# Normally the ICP query timeout is determined dynamically. But +# sometimes it can lead to very large values (say 5 seconds). +# Use this option to put an upper limit on the dynamic timeout +# value. Do NOT use this option to always use a fixed (instead +# of a dynamic) timeout value. To set a fixed timeout see the +# 'icp_query_timeout' directive. +#Default: +# maximum_icp_query_timeout 2000 + +# TAG: minimum_icp_query_timeout (msec) +# Normally the ICP query timeout is determined dynamically. But +# sometimes it can lead to very small timeouts, even lower than +# the normal latency variance on your link due to traffic. +# Use this option to put an lower limit on the dynamic timeout +# value. Do NOT use this option to always use a fixed (instead +# of a dynamic) timeout value. To set a fixed timeout see the +# 'icp_query_timeout' directive. +#Default: +# minimum_icp_query_timeout 5 + +# TAG: background_ping_rate time-units +# Controls how often the ICP pings are sent to siblings that +# have background-ping set. +#Default: +# background_ping_rate 10 seconds + +# MULTICAST ICP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: mcast_groups +# This tag specifies a list of multicast groups which your server +# should join to receive multicasted ICP queries. +# +# NOTE! Be very careful what you put here! Be sure you +# understand the difference between an ICP _query_ and an ICP +# _reply_. This option is to be set only if you want to RECEIVE +# multicast queries. Do NOT set this option to SEND multicast +# ICP (use cache_peer for that). ICP replies are always sent via +# unicast, so this option does not affect whether or not you will +# receive replies from multicast group members. +# +# You must be very careful to NOT use a multicast address which +# is already in use by another group of caches. +# +# If you are unsure about multicast, please read the Multicast +# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/). +# +# Usage: mcast_groups 239.128.16.128 224.0.1.20 +# +# By default, Squid doesn't listen on any multicast groups. +#Default: +# none + +# TAG: mcast_miss_addr +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# If you enable this option, every "cache miss" URL will +# be sent out on the specified multicast address. +# +# Do not enable this option unless you are are absolutely +# certain you understand what you are doing. +#Default: +# disabled. + +# TAG: mcast_miss_ttl +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# This is the time-to-live value for packets multicasted +# when multicasting off cache miss URLs is enabled. By +# default this is set to 'site scope', i.e. 16. +#Default: +# mcast_miss_ttl 16 + +# TAG: mcast_miss_port +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# This is the port number to be used in conjunction with +# 'mcast_miss_addr'. +#Default: +# mcast_miss_port 3135 + +# TAG: mcast_miss_encode_key +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# The URLs that are sent in the multicast miss stream are +# encrypted. This is the encryption key. +#Default: +# mcast_miss_encode_key XXXXXXXXXXXXXXXX + +# TAG: mcast_icp_query_timeout (msec) +# For multicast peers, Squid regularly sends out ICP "probes" to +# count how many other peers are listening on the given multicast +# address. This value specifies how long Squid should wait to +# count all the replies. The default is 2000 msec, or 2 +# seconds. +#Default: +# mcast_icp_query_timeout 2000 + +# INTERNAL ICON OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icon_directory +# Where the icons are stored. These are normally kept in +# /usr/share/squid/icons +#Default: +# icon_directory /usr/share/squid/icons + +# TAG: global_internal_static +# This directive controls is Squid should intercept all requests for +# /squid-internal-static/ no matter which host the URL is requesting +# (default on setting), or if nothing special should be done for +# such URLs (off setting). The purpose of this directive is to make +# icons etc work better in complex cache hierarchies where it may +# not always be possible for all corners in the cache mesh to reach +# the server generating a directory listing. +#Default: +# global_internal_static on + +# TAG: short_icon_urls +# If this is enabled Squid will use short URLs for icons. +# If disabled it will revert to the old behavior of including +# it's own name and port in the URL. +# +# If you run a complex cache hierarchy with a mix of Squid and +# other proxies you may need to disable this directive. +#Default: +# short_icon_urls on + +# ERROR PAGE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: error_directory +# If you wish to create your own versions of the default +# error files to customize them to suit your company copy +# the error/template files to another directory and point +# this tag at them. +# +# WARNING: This option will disable multi-language support +# on error pages if used. +# +# The squid developers are interested in making squid available in +# a wide variety of languages. If you are making translations for a +# language that Squid does not currently provide please consider +# contributing your translation back to the project. +# http://wiki.squid-cache.org/Translations +# +# The squid developers working on translations are happy to supply drop-in +# translated error files in exchange for any new language contributions. +#Default: +# Send error pages in the clients preferred language + +# TAG: error_default_language +# Set the default language which squid will send error pages in +# if no existing translation matches the clients language +# preferences. +# +# If unset (default) generic English will be used. +# +# The squid developers are interested in making squid available in +# a wide variety of languages. If you are interested in making +# translations for any language see the squid wiki for details. +# http://wiki.squid-cache.org/Translations +#Default: +# Generate English language pages. + +# TAG: error_log_languages +# Log to cache.log what languages users are attempting to +# auto-negotiate for translations. +# +# Successful negotiations are not logged. Only failures +# have meaning to indicate that Squid may need an upgrade +# of its error page translations. +#Default: +# error_log_languages on + +# TAG: err_page_stylesheet +# CSS Stylesheet to pattern the display of Squid default error pages. +# +# For information on CSS see http://www.w3.org/Style/CSS/ +#Default: +# err_page_stylesheet /etc/squid/errorpage.css + +# TAG: err_html_text +# HTML text to include in error messages. Make this a "mailto" +# URL to your admin address, or maybe just a link to your +# organizations Web page. +# +# To include this in your error messages, you must rewrite +# the error template files (found in the "errors" directory). +# Wherever you want the 'err_html_text' line to appear, +# insert a %L tag in the error template file. +#Default: +# none + +# TAG: email_err_data on|off +# If enabled, information about the occurred error will be +# included in the mailto links of the ERR pages (if %W is set) +# so that the email body contains the data. +# Syntax is %w +#Default: +# email_err_data on + +# TAG: deny_info +# Usage: deny_info err_page_name acl +# or deny_info http://... acl +# or deny_info TCP_RESET acl +# +# This can be used to return a ERR_ page for requests which +# do not pass the 'http_access' rules. Squid remembers the last +# acl it evaluated in http_access, and if a 'deny_info' line exists +# for that ACL Squid returns a corresponding error page. +# +# The acl is typically the last acl on the http_access deny line which +# denied access. The exceptions to this rule are: +# - When Squid needs to request authentication credentials. It's then +# the first authentication related acl encountered +# - When none of the http_access lines matches. It's then the last +# acl processed on the last http_access line. +# - When the decision to deny access was made by an adaptation service, +# the acl name is the corresponding eCAP or ICAP service_name. +# +# NP: If providing your own custom error pages with error_directory +# you may also specify them by your custom file name: +# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys +# +# By defaut Squid will send "403 Forbidden". A different 4xx or 5xx +# may be specified by prefixing the file name with the code and a colon. +# e.g. 404:ERR_CUSTOM_ACCESS_DENIED +# +# Alternatively you can tell Squid to reset the TCP connection +# by specifying TCP_RESET. +# +# Or you can specify an error URL or URL pattern. The browsers will +# get redirected to the specified URL after formatting tags have +# been replaced. Redirect will be done with 302 or 307 according to +# HTTP/1.1 specs. A different 3xx code may be specified by prefixing +# the URL. e.g. 303:http://example.com/ +# +# URL FORMAT TAGS: +# %a - username (if available. Password NOT included) +# %B - FTP path URL +# %e - Error number +# %E - Error description +# %h - Squid hostname +# %H - Request domain name +# %i - Client IP Address +# %M - Request Method +# %o - Message result from external ACL helper +# %p - Request Port number +# %P - Request Protocol name +# %R - Request URL path +# %T - Timestamp in RFC 1123 format +# %U - Full canonical URL from client +# (HTTPS URLs terminate with *) +# %u - Full canonical URL from client +# %w - Admin email from squid.conf +# %x - Error name +# %% - Literal percent (%) code +# +#Default: +# none + +# OPTIONS INFLUENCING REQUEST FORWARDING +# ----------------------------------------------------------------------------- + +# TAG: nonhierarchical_direct +# By default, Squid will send any non-hierarchical requests +# (not cacheable request type) direct to origin servers. +# +# When this is set to "off", Squid will prefer to send these +# requests to parents. +# +# Note that in most configurations, by turning this off you will only +# add latency to these request without any improvement in global hit +# ratio. +# +# This option only sets a preference. If the parent is unavailable a +# direct connection to the origin server may still be attempted. To +# completely prevent direct connections use never_direct. +#Default: +# nonhierarchical_direct on + +# TAG: prefer_direct +# Normally Squid tries to use parents for most requests. If you for some +# reason like it to first try going direct and only use a parent if +# going direct fails set this to on. +# +# By combining nonhierarchical_direct off and prefer_direct on you +# can set up Squid to use a parent as a backup path if going direct +# fails. +# +# Note: If you want Squid to use parents for all requests see +# the never_direct directive. prefer_direct only modifies how Squid +# acts on cacheable requests. +#Default: +# prefer_direct off + +# TAG: cache_miss_revalidate on|off +# RFC 7232 defines a conditional request mechanism to prevent +# response objects being unnecessarily transferred over the network. +# If that mechanism is used by the client and a cache MISS occurs +# it can prevent new cache entries being created. +# +# This option determines whether Squid on cache MISS will pass the +# client revalidation request to the server or tries to fetch new +# content for caching. It can be useful while the cache is mostly +# empty to more quickly have the cache populated by generating +# non-conditional GETs. +# +# When set to 'on' (default), Squid will pass all client If-* headers +# to the server. This permits server responses without a cacheable +# payload to be delivered and on MISS no new cache entry is created. +# +# When set to 'off' and if the request is cacheable, Squid will +# remove the clients If-Modified-Since and If-None-Match headers from +# the request sent to the server. This requests a 200 status response +# from the server to create a new cache entry with. +#Default: +# cache_miss_revalidate on + +# TAG: always_direct +# Usage: always_direct allow|deny [!]aclname ... +# +# Here you can use ACL elements to specify requests which should +# ALWAYS be forwarded by Squid to the origin servers without using +# any peers. For example, to always directly forward requests for +# local servers ignoring any parents or siblings you may have use +# something like: +# +# acl local-servers dstdomain my.domain.net +# always_direct allow local-servers +# +# To always forward FTP requests directly, use +# +# acl FTP proto FTP +# always_direct allow FTP +# +# NOTE: There is a similar, but opposite option named +# 'never_direct'. You need to be aware that "always_direct deny +# foo" is NOT the same thing as "never_direct allow foo". You +# may need to use a deny rule to exclude a more-specific case of +# some other rule. Example: +# +# acl local-external dstdomain external.foo.net +# acl local-servers dstdomain .foo.net +# always_direct deny local-external +# always_direct allow local-servers +# +# NOTE: If your goal is to make the client forward the request +# directly to the origin server bypassing Squid then this needs +# to be done in the client configuration. Squid configuration +# can only tell Squid how Squid should fetch the object. +# +# NOTE: This directive is not related to caching. The replies +# is cached as usual even if you use always_direct. To not cache +# the replies see the 'cache' directive. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Prevent any cache_peer being used for this request. + +# TAG: never_direct +# Usage: never_direct allow|deny [!]aclname ... +# +# never_direct is the opposite of always_direct. Please read +# the description for always_direct if you have not already. +# +# With 'never_direct' you can use ACL elements to specify +# requests which should NEVER be forwarded directly to origin +# servers. For example, to force the use of a proxy for all +# requests, except those in your local domain use something like: +# +# acl local-servers dstdomain .foo.net +# never_direct deny local-servers +# never_direct allow all +# +# or if Squid is inside a firewall and there are local intranet +# servers inside the firewall use something like: +# +# acl local-intranet dstdomain .foo.net +# acl local-external dstdomain external.foo.net +# always_direct deny local-external +# always_direct allow local-intranet +# never_direct allow all +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# Allow DNS results to be used for this request. + +# ADVANCED NETWORKING OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: incoming_udp_average +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# incoming_udp_average 6 + +# TAG: incoming_tcp_average +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# incoming_tcp_average 4 + +# TAG: incoming_dns_average +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# incoming_dns_average 4 + +# TAG: min_udp_poll_cnt +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# min_udp_poll_cnt 8 + +# TAG: min_dns_poll_cnt +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# min_dns_poll_cnt 8 + +# TAG: min_tcp_poll_cnt +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# min_tcp_poll_cnt 8 + +# TAG: accept_filter +# FreeBSD: +# +# The name of an accept(2) filter to install on Squid's +# listen socket(s). This feature is perhaps specific to +# FreeBSD and requires support in the kernel. +# +# The 'httpready' filter delays delivering new connections +# to Squid until a full HTTP request has been received. +# See the accf_http(9) man page for details. +# +# The 'dataready' filter delays delivering new connections +# to Squid until there is some data to process. +# See the accf_dataready(9) man page for details. +# +# Linux: +# +# The 'data' filter delays delivering of new connections +# to Squid until there is some data to process by TCP_ACCEPT_DEFER. +# You may optionally specify a number of seconds to wait by +# 'data=N' where N is the number of seconds. Defaults to 30 +# if not specified. See the tcp(7) man page for details. +#EXAMPLE: +## FreeBSD +#accept_filter httpready +## Linux +#accept_filter data +#Default: +# none + +# TAG: client_ip_max_connections +# Set an absolute limit on the number of connections a single +# client IP can use. Any more than this and Squid will begin to drop +# new connections from the client until it closes some links. +# +# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP +# connections from the client. For finer control use the ACL access controls. +# +# Requires client_db to be enabled (the default). +# +# WARNING: This may noticably slow down traffic received via external proxies +# or NAT devices and cause them to rebound error messages back to their clients. +#Default: +# No limit. + +# TAG: tcp_recv_bufsize (bytes) +# Size of receive buffer to set for TCP sockets. Probably just +# as easy to change your kernel's default. +# Omit from squid.conf to use the default buffer size. +#Default: +# Use operating system TCP defaults. + +# ICAP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icap_enable on|off +# If you want to enable the ICAP module support, set this to on. +#Default: +# icap_enable off + +# TAG: icap_connect_timeout +# This parameter specifies how long to wait for the TCP connect to +# the requested ICAP server to complete before giving up and either +# terminating the HTTP transaction or bypassing the failure. +# +# The default for optional services is peer_connect_timeout. +# The default for essential services is connect_timeout. +# If this option is explicitly set, its value applies to all services. +#Default: +# none + +# TAG: icap_io_timeout time-units +# This parameter specifies how long to wait for an I/O activity on +# an established, active ICAP connection before giving up and +# either terminating the HTTP transaction or bypassing the +# failure. +#Default: +# Use read_timeout. + +# TAG: icap_service_failure_limit limit [in memory-depth time-units] +# The limit specifies the number of failures that Squid tolerates +# when establishing a new TCP connection with an ICAP service. If +# the number of failures exceeds the limit, the ICAP service is +# not used for new ICAP requests until it is time to refresh its +# OPTIONS. +# +# A negative value disables the limit. Without the limit, an ICAP +# service will not be considered down due to connectivity failures +# between ICAP OPTIONS requests. +# +# Squid forgets ICAP service failures older than the specified +# value of memory-depth. The memory fading algorithm +# is approximate because Squid does not remember individual +# errors but groups them instead, splitting the option +# value into ten time slots of equal length. +# +# When memory-depth is 0 and by default this option has no +# effect on service failure expiration. +# +# Squid always forgets failures when updating service settings +# using an ICAP OPTIONS transaction, regardless of this option +# setting. +# +# For example, +# # suspend service usage after 10 failures in 5 seconds: +# icap_service_failure_limit 10 in 5 seconds +#Default: +# icap_service_failure_limit 10 + +# TAG: icap_service_revival_delay +# The delay specifies the number of seconds to wait after an ICAP +# OPTIONS request failure before requesting the options again. The +# failed ICAP service is considered "down" until fresh OPTIONS are +# fetched. +# +# The actual delay cannot be smaller than the hardcoded minimum +# delay of 30 seconds. +#Default: +# icap_service_revival_delay 180 + +# TAG: icap_preview_enable on|off +# The ICAP Preview feature allows the ICAP server to handle the +# HTTP message by looking only at the beginning of the message body +# or even without receiving the body at all. In some environments, +# previews greatly speedup ICAP processing. +# +# During an ICAP OPTIONS transaction, the server may tell Squid what +# HTTP messages should be previewed and how big the preview should be. +# Squid will not use Preview if the server did not request one. +# +# To disable ICAP Preview for all ICAP services, regardless of +# individual ICAP server OPTIONS responses, set this option to "off". +#Example: +#icap_preview_enable off +#Default: +# icap_preview_enable on + +# TAG: icap_preview_size +# The default size of preview data to be sent to the ICAP server. +# This value might be overwritten on a per server basis by OPTIONS requests. +#Default: +# No preview sent. + +# TAG: icap_206_enable on|off +# 206 (Partial Content) responses is an ICAP extension that allows the +# ICAP agents to optionally combine adapted and original HTTP message +# content. The decision to combine is postponed until the end of the +# ICAP response. Squid supports Partial Content extension by default. +# +# Activation of the Partial Content extension is negotiated with each +# ICAP service during OPTIONS exchange. Most ICAP servers should handle +# negotation correctly even if they do not support the extension, but +# some might fail. To disable Partial Content support for all ICAP +# services and to avoid any negotiation, set this option to "off". +# +# Example: +# icap_206_enable off +#Default: +# icap_206_enable on + +# TAG: icap_default_options_ttl +# The default TTL value for ICAP OPTIONS responses that don't have +# an Options-TTL header. +#Default: +# icap_default_options_ttl 60 + +# TAG: icap_persistent_connections on|off +# Whether or not Squid should use persistent connections to +# an ICAP server. +#Default: +# icap_persistent_connections on + +# TAG: adaptation_send_client_ip on|off +# If enabled, Squid shares HTTP client IP information with adaptation +# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests. +# For eCAP, Squid sets the libecap::metaClientIp transaction option. +# +# See also: adaptation_uses_indirect_client +#Default: +# adaptation_send_client_ip off + +# TAG: adaptation_send_username on|off +# This sends authenticated HTTP client username (if available) to +# the adaptation service. +# +# For ICAP, the username value is encoded based on the +# icap_client_username_encode option and is sent using the header +# specified by the icap_client_username_header option. +#Default: +# adaptation_send_username off + +# TAG: icap_client_username_header +# ICAP request header name to use for adaptation_send_username. +#Default: +# icap_client_username_header X-Client-Username + +# TAG: icap_client_username_encode on|off +# Whether to base64 encode the authenticated client username. +#Default: +# icap_client_username_encode off + +# TAG: icap_service +# Defines a single ICAP service using the following format: +# +# icap_service id vectoring_point uri [option ...] +# +# id: ID +# an opaque identifier or name which is used to direct traffic to +# this specific service. Must be unique among all adaptation +# services in squid.conf. +# +# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache +# This specifies at which point of transaction processing the +# ICAP service should be activated. *_postcache vectoring points +# are not yet supported. +# +# uri: icap://servername:port/servicepath +# ICAP server and service location. +# +# ICAP does not allow a single service to handle both REQMOD and RESPMOD +# transactions. Squid does not enforce that requirement. You can specify +# services with the same service_url and different vectoring_points. You +# can even specify multiple identical services as long as their +# service_names differ. +# +# To activate a service, use the adaptation_access directive. To group +# services, use adaptation_service_chain and adaptation_service_set. +# +# Service options are separated by white space. ICAP services support +# the following name=value options: +# +# bypass=on|off|1|0 +# If set to 'on' or '1', the ICAP service is treated as +# optional. If the service cannot be reached or malfunctions, +# Squid will try to ignore any errors and process the message as +# if the service was not enabled. No all ICAP errors can be +# bypassed. If set to 0, the ICAP service is treated as +# essential and all ICAP errors will result in an error page +# returned to the HTTP client. +# +# Bypass is off by default: services are treated as essential. +# +# routing=on|off|1|0 +# If set to 'on' or '1', the ICAP service is allowed to +# dynamically change the current message adaptation plan by +# returning a chain of services to be used next. The services +# are specified using the X-Next-Services ICAP response header +# value, formatted as a comma-separated list of service names. +# Each named service should be configured in squid.conf. Other +# services are ignored. An empty X-Next-Services value results +# in an empty plan which ends the current adaptation. +# +# Dynamic adaptation plan may cross or cover multiple supported +# vectoring points in their natural processing order. +# +# Routing is not allowed by default: the ICAP X-Next-Services +# response header is ignored. +# +# ipv6=on|off +# Only has effect on split-stack systems. The default on those systems +# is to use IPv4-only connections. When set to 'on' this option will +# make Squid use IPv6-only connections to contact this ICAP service. +# +# on-overload=block|bypass|wait|force +# If the service Max-Connections limit has been reached, do +# one of the following for each new ICAP transaction: +# * block: send an HTTP error response to the client +# * bypass: ignore the "over-connected" ICAP service +# * wait: wait (in a FIFO queue) for an ICAP connection slot +# * force: proceed, ignoring the Max-Connections limit +# +# In SMP mode with N workers, each worker assumes the service +# connection limit is Max-Connections/N, even though not all +# workers may use a given service. +# +# The default value is "bypass" if service is bypassable, +# otherwise it is set to "wait". +# +# +# max-conn=number +# Use the given number as the Max-Connections limit, regardless +# of the Max-Connections value given by the service, if any. +# +# Older icap_service format without optional named parameters is +# deprecated but supported for backward compatibility. +# +#Example: +#icap_service svcBlocker reqmod_precache icap://icap1.mydomain.net:1344/reqmod bypass=0 +#icap_service svcLogger reqmod_precache icap://icap2.mydomain.net:1344/respmod routing=on +#Default: +# none + +# TAG: icap_class +# This deprecated option was documented to define an ICAP service +# chain, even though it actually defined a set of similar, redundant +# services, and the chains were not supported. +# +# To define a set of redundant services, please use the +# adaptation_service_set directive. For service chains, use +# adaptation_service_chain. +#Default: +# none + +# TAG: icap_access +# This option is deprecated. Please use adaptation_access, which +# has the same ICAP functionality, but comes with better +# documentation, and eCAP support. +#Default: +# none + +# eCAP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: ecap_enable on|off +# Controls whether eCAP support is enabled. +#Default: +# ecap_enable off + +# TAG: ecap_service +# Defines a single eCAP service +# +# ecap_service id vectoring_point uri [option ...] +# +# id: ID +# an opaque identifier or name which is used to direct traffic to +# this specific service. Must be unique among all adaptation +# services in squid.conf. +# +# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache +# This specifies at which point of transaction processing the +# eCAP service should be activated. *_postcache vectoring points +# are not yet supported. +# +# uri: ecap://vendor/service_name?custom&cgi=style¶meters=optional +# Squid uses the eCAP service URI to match this configuration +# line with one of the dynamically loaded services. Each loaded +# eCAP service must have a unique URI. Obtain the right URI from +# the service provider. +# +# To activate a service, use the adaptation_access directive. To group +# services, use adaptation_service_chain and adaptation_service_set. +# +# Service options are separated by white space. eCAP services support +# the following name=value options: +# +# bypass=on|off|1|0 +# If set to 'on' or '1', the eCAP service is treated as optional. +# If the service cannot be reached or malfunctions, Squid will try +# to ignore any errors and process the message as if the service +# was not enabled. No all eCAP errors can be bypassed. +# If set to 'off' or '0', the eCAP service is treated as essential +# and all eCAP errors will result in an error page returned to the +# HTTP client. +# +# Bypass is off by default: services are treated as essential. +# +# routing=on|off|1|0 +# If set to 'on' or '1', the eCAP service is allowed to +# dynamically change the current message adaptation plan by +# returning a chain of services to be used next. +# +# Dynamic adaptation plan may cross or cover multiple supported +# vectoring points in their natural processing order. +# +# Routing is not allowed by default. +# +# Older ecap_service format without optional named parameters is +# deprecated but supported for backward compatibility. +# +# +#Example: +#ecap_service s1 reqmod_precache ecap://filters.R.us/leakDetector?on_error=block bypass=off +#ecap_service s2 respmod_precache ecap://filters.R.us/virusFilter config=/etc/vf.cfg bypass=on +#Default: +# none + +# TAG: loadable_modules +# Instructs Squid to load the specified dynamic module(s) or activate +# preloaded module(s). +#Example: +#loadable_modules /usr/lib/MinimalAdapter.so +#Default: +# none + +# MESSAGE ADAPTATION OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: adaptation_service_set +# +# Configures an ordered set of similar, redundant services. This is +# useful when hot standby or backup adaptation servers are available. +# +# adaptation_service_set set_name service_name1 service_name2 ... +# +# The named services are used in the set declaration order. The first +# applicable adaptation service from the set is used first. The next +# applicable service is tried if and only if the transaction with the +# previous service fails and the message waiting to be adapted is still +# intact. +# +# When adaptation starts, broken services are ignored as if they were +# not a part of the set. A broken service is a down optional service. +# +# The services in a set must be attached to the same vectoring point +# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). +# +# If all services in a set are optional then adaptation failures are +# bypassable. If all services in the set are essential, then a +# transaction failure with one service may still be retried using +# another service from the set, but when all services fail, the master +# transaction fails as well. +# +# A set may contain a mix of optional and essential services, but that +# is likely to lead to surprising results because broken services become +# ignored (see above), making previously bypassable failures fatal. +# Technically, it is the bypassability of the last failed service that +# matters. +# +# See also: adaptation_access adaptation_service_chain +# +#Example: +#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup +#adaptation service_set svcLogger loggerLocal loggerRemote +#Default: +# none + +# TAG: adaptation_service_chain +# +# Configures a list of complementary services that will be applied +# one-by-one, forming an adaptation chain or pipeline. This is useful +# when Squid must perform different adaptations on the same message. +# +# adaptation_service_chain chain_name service_name1 svc_name2 ... +# +# The named services are used in the chain declaration order. The first +# applicable adaptation service from the chain is used first. The next +# applicable service is applied to the successful adaptation results of +# the previous service in the chain. +# +# When adaptation starts, broken services are ignored as if they were +# not a part of the chain. A broken service is a down optional service. +# +# Request satisfaction terminates the adaptation chain because Squid +# does not currently allow declaration of RESPMOD services at the +# "reqmod_precache" vectoring point (see icap_service or ecap_service). +# +# The services in a chain must be attached to the same vectoring point +# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). +# +# A chain may contain a mix of optional and essential services. If an +# essential adaptation fails (or the failure cannot be bypassed for +# other reasons), the master transaction fails. Otherwise, the failure +# is bypassed as if the failed adaptation service was not in the chain. +# +# See also: adaptation_access adaptation_service_set +# +#Example: +#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector +#Default: +# none + +# TAG: adaptation_access +# Sends an HTTP transaction to an ICAP or eCAP adaptation service. +# +# adaptation_access service_name allow|deny [!]aclname... +# adaptation_access set_name allow|deny [!]aclname... +# +# At each supported vectoring point, the adaptation_access +# statements are processed in the order they appear in this +# configuration file. Statements pointing to the following services +# are ignored (i.e., skipped without checking their ACL): +# +# - services serving different vectoring points +# - "broken-but-bypassable" services +# - "up" services configured to ignore such transactions +# (e.g., based on the ICAP Transfer-Ignore header). +# +# When a set_name is used, all services in the set are checked +# using the same rules, to find the first applicable one. See +# adaptation_service_set for details. +# +# If an access list is checked and there is a match, the +# processing stops: For an "allow" rule, the corresponding +# adaptation service is used for the transaction. For a "deny" +# rule, no adaptation service is activated. +# +# It is currently not possible to apply more than one adaptation +# service at the same vectoring point to the same HTTP transaction. +# +# See also: icap_service and ecap_service +# +#Example: +#adaptation_access service_1 allow all +#Default: +# Allow, unless rules exist in squid.conf. + +# TAG: adaptation_service_iteration_limit +# Limits the number of iterations allowed when applying adaptation +# services to a message. If your longest adaptation set or chain +# may have more than 16 services, increase the limit beyond its +# default value of 16. If detecting infinite iteration loops sooner +# is critical, make the iteration limit match the actual number +# of services in your longest adaptation set or chain. +# +# Infinite adaptation loops are most likely with routing services. +# +# See also: icap_service routing=1 +#Default: +# adaptation_service_iteration_limit 16 + +# TAG: adaptation_masterx_shared_names +# For each master transaction (i.e., the HTTP request and response +# sequence, including all related ICAP and eCAP exchanges), Squid +# maintains a table of metadata. The table entries are (name, value) +# pairs shared among eCAP and ICAP exchanges. The table is destroyed +# with the master transaction. +# +# This option specifies the table entry names that Squid must accept +# from and forward to the adaptation transactions. +# +# An ICAP REQMOD or RESPMOD transaction may set an entry in the +# shared table by returning an ICAP header field with a name +# specified in adaptation_masterx_shared_names. +# +# An eCAP REQMOD or RESPMOD transaction may set an entry in the +# shared table by implementing the libecap::visitEachOption() API +# to provide an option with a name specified in +# adaptation_masterx_shared_names. +# +# Squid will store and forward the set entry to subsequent adaptation +# transactions within the same master transaction scope. +# +# Only one shared entry name is supported at this time. +# +#Example: +## share authentication information among ICAP services +#adaptation_masterx_shared_names X-Subscriber-ID +#Default: +# none + +# TAG: adaptation_meta +# This option allows Squid administrator to add custom ICAP request +# headers or eCAP options to Squid ICAP requests or eCAP transactions. +# Use it to pass custom authentication tokens and other +# transaction-state related meta information to an ICAP/eCAP service. +# +# The addition of a meta header is ACL-driven: +# adaptation_meta name value [!]aclname ... +# +# Processing for a given header name stops after the first ACL list match. +# Thus, it is impossible to add two headers with the same name. If no ACL +# lists match for a given header name, no such header is added. For +# example: +# +# # do not debug transactions except for those that need debugging +# adaptation_meta X-Debug 1 needs_debugging +# +# # log all transactions except for those that must remain secret +# adaptation_meta X-Log 1 !keep_secret +# +# # mark transactions from users in the "G 1" group +# adaptation_meta X-Authenticated-Groups "G 1" authed_as_G1 +# +# The "value" parameter may be a regular squid.conf token or a "double +# quoted string". Within the quoted string, use backslash (\) to escape +# any character, which is currently only useful for escaping backslashes +# and double quotes. For example, +# "this string has one backslash (\\) and two \"quotes\"" +# +# Used adaptation_meta header values may be logged via %note +# logformat code. If multiple adaptation_meta headers with the same name +# are used during master transaction lifetime, the header values are +# logged in the order they were used and duplicate values are ignored +# (only the first repeated value will be logged). +#Default: +# none + +# TAG: icap_retry +# This ACL determines which retriable ICAP transactions are +# retried. Transactions that received a complete ICAP response +# and did not have to consume or produce HTTP bodies to receive +# that response are usually retriable. +# +# icap_retry allow|deny [!]aclname ... +# +# Squid automatically retries some ICAP I/O timeouts and errors +# due to persistent connection race conditions. +# +# See also: icap_retry_limit +#Default: +# icap_retry deny all + +# TAG: icap_retry_limit +# Limits the number of retries allowed. +# +# Communication errors due to persistent connection race +# conditions are unavoidable, automatically retried, and do not +# count against this limit. +# +# See also: icap_retry +#Default: +# No retries are allowed. + +# DNS OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: check_hostnames +# For security and stability reasons Squid can check +# hostnames for Internet standard RFC compliance. If you want +# Squid to perform these checks turn this directive on. +#Default: +# check_hostnames off + +# TAG: allow_underscore +# Underscore characters is not strictly allowed in Internet hostnames +# but nevertheless used by many sites. Set this to off if you want +# Squid to be strict about the standard. +# This check is performed only when check_hostnames is set to on. +#Default: +# allow_underscore on + +# TAG: dns_retransmit_interval +# Initial retransmit interval for DNS queries. The interval is +# doubled each time all configured DNS servers have been tried. +#Default: +# dns_retransmit_interval 5 seconds + +# TAG: dns_timeout +# DNS Query timeout. If no response is received to a DNS query +# within this time all DNS servers for the queried domain +# are assumed to be unavailable. +#Default: +# dns_timeout 30 seconds + +# TAG: dns_packet_max +# Maximum number of bytes packet size to advertise via EDNS. +# Set to "none" to disable EDNS large packet support. +# +# For legacy reasons DNS UDP replies will default to 512 bytes which +# is too small for many responses. EDNS provides a means for Squid to +# negotiate receiving larger responses back immediately without having +# to failover with repeat requests. Responses larger than this limit +# will retain the old behaviour of failover to TCP DNS. +# +# Squid has no real fixed limit internally, but allowing packet sizes +# over 1500 bytes requires network jumbogram support and is usually not +# necessary. +# +# WARNING: The RFC also indicates that some older resolvers will reply +# with failure of the whole request if the extension is added. Some +# resolvers have already been identified which will reply with mangled +# EDNS response on occasion. Usually in response to many-KB jumbogram +# sizes being advertised by Squid. +# Squid will currently treat these both as an unable-to-resolve domain +# even if it would be resolvable without EDNS. +#Default: +# EDNS disabled + +# TAG: dns_defnames on|off +# Normally the RES_DEFNAMES resolver option is disabled +# (see res_init(3)). This prevents caches in a hierarchy +# from interpreting single-component hostnames locally. To allow +# Squid to handle single-component names, enable this option. +#Default: +# Search for single-label domain names is disabled. + +# TAG: dns_multicast_local on|off +# When set to on, Squid sends multicast DNS lookups on the local +# network for domains ending in .local and .arpa. +# This enables local servers and devices to be contacted in an +# ad-hoc or zero-configuration network environment. +#Default: +# Search for .local and .arpa names is disabled. + +# TAG: dns_nameservers +# Use this if you want to specify a list of DNS name servers +# (IP addresses) to use instead of those given in your +# /etc/resolv.conf file. +# +# On Windows platforms, if no value is specified here or in +# the /etc/resolv.conf file, the list of DNS name servers are +# taken from the Windows registry, both static and dynamic DHCP +# configurations are supported. +# +# Example: dns_nameservers 10.0.0.1 192.172.0.4 +#Default: +# Use operating system definitions + +# TAG: hosts_file +# Location of the host-local IP name-address associations +# database. Most Operating Systems have such a file on different +# default locations: +# - Un*X & Linux: /etc/hosts +# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts +# (%SystemRoot% value install default is c:\winnt) +# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts +# (%SystemRoot% value install default is c:\windows) +# - Windows 9x/Me: %windir%\hosts +# (%windir% value is usually c:\windows) +# - Cygwin: /etc/hosts +# +# The file contains newline-separated definitions, in the +# form ip_address_in_dotted_form name [name ...] names are +# whitespace-separated. Lines beginning with an hash (#) +# character are comments. +# +# The file is checked at startup and upon configuration. +# If set to 'none', it won't be checked. +# If append_domain is used, that domain will be added to +# domain-local (i.e. not containing any dot character) host +# definitions. +#Default: +# hosts_file /etc/hosts + +# TAG: append_domain +# Appends local domain name to hostnames without any dots in +# them. append_domain must begin with a period. +# +# Be warned there are now Internet names with no dots in +# them using only top-domain names, so setting this may +# cause some Internet sites to become unavailable. +# +#Example: +# append_domain .yourdomain.com +#Default: +# Use operating system definitions + +# TAG: ignore_unknown_nameservers +# By default Squid checks that DNS responses are received +# from the same IP addresses they are sent to. If they +# don't match, Squid ignores the response and writes a warning +# message to cache.log. You can allow responses from unknown +# nameservers by setting this option to 'off'. +#Default: +# ignore_unknown_nameservers on + +# TAG: dns_v4_first +# With the IPv6 Internet being as fast or faster than IPv4 Internet +# for most networks Squid prefers to contact websites over IPv6. +# +# This option reverses the order of preference to make Squid contact +# dual-stack websites over IPv4 first. Squid will still perform both +# IPv6 and IPv4 DNS lookups before connecting. +# +# WARNING: +# This option will restrict the situations under which IPv6 +# connectivity is used (and tested), potentially hiding network +# problems which would otherwise be detected and warned about. +#Default: +# dns_v4_first off + +# TAG: ipcache_size (number of entries) +# Maximum number of DNS IP cache entries. +#Default: +# ipcache_size 1024 + +# TAG: ipcache_low (percent) +#Default: +# ipcache_low 90 + +# TAG: ipcache_high (percent) +# The size, low-, and high-water marks for the IP cache. +#Default: +# ipcache_high 95 + +# TAG: fqdncache_size (number of entries) +# Maximum number of FQDN cache entries. +#Default: +# fqdncache_size 1024 + +# MISCELLANEOUS +# ----------------------------------------------------------------------------- + +# TAG: configuration_includes_quoted_values on|off +# If set, Squid will recognize each "quoted string" after a configuration +# directive as a single parameter. The quotes are stripped before the +# parameter value is interpreted or used. +# See "Values with spaces, quotes, and other special characters" +# section for more details. +#Default: +# configuration_includes_quoted_values off + +# TAG: memory_pools on|off +# If set, Squid will keep pools of allocated (but unused) memory +# available for future use. If memory is a premium on your +# system and you believe your malloc library outperforms Squid +# routines, disable this. +#Default: +# memory_pools on + +# TAG: memory_pools_limit (bytes) +# Used only with memory_pools on: +# memory_pools_limit 50 MB +# +# If set to a non-zero value, Squid will keep at most the specified +# limit of allocated (but unused) memory in memory pools. All free() +# requests that exceed this limit will be handled by your malloc +# library. Squid does not pre-allocate any memory, just safe-keeps +# objects that otherwise would be free()d. Thus, it is safe to set +# memory_pools_limit to a reasonably high value even if your +# configuration will use less memory. +# +# If set to none, Squid will keep all memory it can. That is, there +# will be no limit on the total amount of memory used for safe-keeping. +# +# To disable memory allocation optimization, do not set +# memory_pools_limit to 0 or none. Set memory_pools to "off" instead. +# +# An overhead for maintaining memory pools is not taken into account +# when the limit is checked. This overhead is close to four bytes per +# object kept. However, pools may actually _save_ memory because of +# reduced memory thrashing in your malloc library. +#Default: +# memory_pools_limit 5 MB + +# TAG: forwarded_for on|off|transparent|truncate|delete +# If set to "on", Squid will append your client's IP address +# in the HTTP requests it forwards. By default it looks like: +# +# X-Forwarded-For: 192.1.2.3 +# +# If set to "off", it will appear as +# +# X-Forwarded-For: unknown +# +# If set to "transparent", Squid will not alter the +# X-Forwarded-For header in any way. +# +# If set to "delete", Squid will delete the entire +# X-Forwarded-For header. +# +# If set to "truncate", Squid will remove all existing +# X-Forwarded-For entries, and place the client IP as the sole entry. +#Default: +# forwarded_for on + +# TAG: cachemgr_passwd +# Specify passwords for cachemgr operations. +# +# Usage: cachemgr_passwd password action action ... +# +# Some valid actions are (see cache manager menu for a full list): +# 5min +# 60min +# asndb +# authenticator +# cbdata +# client_list +# comm_incoming +# config * +# counters +# delay +# digest_stats +# dns +# events +# filedescriptors +# fqdncache +# histograms +# http_headers +# info +# io +# ipcache +# mem +# menu +# netdb +# non_peers +# objects +# offline_toggle * +# pconn +# peer_select +# reconfigure * +# redirector +# refresh +# server_list +# shutdown * +# store_digest +# storedir +# utilization +# via_headers +# vm_objects +# +# * Indicates actions which will not be performed without a +# valid password, others can be performed if not listed here. +# +# To disable an action, set the password to "disable". +# To allow performing an action without a password, set the +# password to "none". +# +# Use the keyword "all" to set the same password for all actions. +# +#Example: +# cachemgr_passwd secret shutdown +# cachemgr_passwd lesssssssecret info stats/objects +# cachemgr_passwd disable all +#Default: +# No password. Actions which require password are denied. + +# TAG: client_db on|off +# If you want to disable collecting per-client statistics, +# turn off client_db here. +#Default: +# client_db on + +# TAG: refresh_all_ims on|off +# When you enable this option, squid will always check +# the origin server for an update when a client sends an +# If-Modified-Since request. Many browsers use IMS +# requests when the user requests a reload, and this +# ensures those clients receive the latest version. +# +# By default (off), squid may return a Not Modified response +# based on the age of the cached version. +#Default: +# refresh_all_ims off + +# TAG: reload_into_ims on|off +# When you enable this option, client no-cache or ``reload'' +# requests will be changed to If-Modified-Since requests. +# Doing this VIOLATES the HTTP standard. Enabling this +# feature could make you liable for problems which it +# causes. +# +# see also refresh_pattern for a more selective approach. +#Default: +# reload_into_ims off + +# TAG: connect_retries +# This sets the maximum number of connection attempts made for each +# TCP connection. The connect_retries attempts must all still +# complete within the connection timeout period. +# +# The default is not to re-try if the first connection attempt fails. +# The (not recommended) maximum is 10 tries. +# +# A warning message will be generated if it is set to a too-high +# value and the configured value will be over-ridden. +# +# Note: These re-tries are in addition to forward_max_tries +# which limit how many different addresses may be tried to find +# a useful server. +#Default: +# Do not retry failed connections. + +# TAG: retry_on_error +# If set to ON Squid will automatically retry requests when +# receiving an error response with status 403 (Forbidden), +# 500 (Internal Error), 501 or 503 (Service not available). +# Status 502 and 504 (Gateway errors) are always retried. +# +# This is mainly useful if you are in a complex cache hierarchy to +# work around access control errors. +# +# NOTE: This retry will attempt to find another working destination. +# Which is different from the server which just failed. +#Default: +# retry_on_error off + +# TAG: as_whois_server +# WHOIS server to query for AS numbers. NOTE: AS numbers are +# queried only when Squid starts up, not for every request. +#Default: +# as_whois_server whois.ra.net + +# TAG: offline_mode +# Enable this option and Squid will never try to validate cached +# objects. +#Default: +# offline_mode off + +# TAG: uri_whitespace +# What to do with requests that have whitespace characters in the +# URI. Options: +# +# strip: The whitespace characters are stripped out of the URL. +# This is the behavior recommended by RFC2396 and RFC3986 +# for tolerant handling of generic URI. +# NOTE: This is one difference between generic URI and HTTP URLs. +# +# deny: The request is denied. The user receives an "Invalid +# Request" message. +# This is the behaviour recommended by RFC2616 for safe +# handling of HTTP request URL. +# +# allow: The request is allowed and the URI is not changed. The +# whitespace characters remain in the URI. Note the +# whitespace is passed to redirector processes if they +# are in use. +# Note this may be considered a violation of RFC2616 +# request parsing where whitespace is prohibited in the +# URL field. +# +# encode: The request is allowed and the whitespace characters are +# encoded according to RFC1738. +# +# chop: The request is allowed and the URI is chopped at the +# first whitespace. +# +# +# NOTE the current Squid implementation of encode and chop violates +# RFC2616 by not using a 301 redirect after altering the URL. +#Default: +# uri_whitespace strip + +# TAG: chroot +# Specifies a directory where Squid should do a chroot() while +# initializing. This also causes Squid to fully drop root +# privileges after initializing. This means, for example, if you +# use a HTTP port less than 1024 and try to reconfigure, you may +# get an error saying that Squid can not open the port. +#Default: +# none + +# TAG: balance_on_multiple_ip +# Modern IP resolvers in squid sort lookup results by preferred access. +# By default squid will use these IP in order and only rotates to +# the next listed when the most preffered fails. +# +# Some load balancing servers based on round robin DNS have been +# found not to preserve user session state across requests +# to different IP addresses. +# +# Enabling this directive Squid rotates IP's per request. +#Default: +# balance_on_multiple_ip off + +# TAG: pipeline_prefetch +# HTTP clients may send a pipeline of 1+N requests to Squid using a +# single connection, without waiting for Squid to respond to the first +# of those requests. This option limits the number of concurrent +# requests Squid will try to handle in parallel. If set to N, Squid +# will try to receive and process up to 1+N requests on the same +# connection concurrently. +# +# Defaults to 0 (off) for bandwidth management and access logging +# reasons. +# +# NOTE: pipelining requires persistent connections to clients. +# +# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication. +#Default: +# Do not pre-parse pipelined requests. + +# TAG: high_response_time_warning (msec) +# If the one-minute median response time exceeds this value, +# Squid prints a WARNING with debug level 0 to get the +# administrators attention. The value is in milliseconds. +#Default: +# disabled. + +# TAG: high_page_fault_warning +# If the one-minute average page fault rate exceeds this +# value, Squid prints a WARNING with debug level 0 to get +# the administrators attention. The value is in page faults +# per second. +#Default: +# disabled. + +# TAG: high_memory_warning +# Note: This option is only available if Squid is rebuilt with the +# GNU Malloc with mstats() +# +# If the memory usage (as determined by gnumalloc, if available and used) +# exceeds this amount, Squid prints a WARNING with debug level 0 to get +# the administrators attention. +#Default: +# disabled. + +# TAG: sleep_after_fork (microseconds) +# When this is set to a non-zero value, the main Squid process +# sleeps the specified number of microseconds after a fork() +# system call. This sleep may help the situation where your +# system reports fork() failures due to lack of (virtual) +# memory. Note, however, if you have a lot of child +# processes, these sleep delays will add up and your +# Squid will not service requests for some amount of time +# until all the child processes have been started. +# On Windows value less then 1000 (1 milliseconds) are +# rounded to 1000. +#Default: +# sleep_after_fork 0 + +# TAG: windows_ipaddrchangemonitor on|off +# Note: This option is only available if Squid is rebuilt with the +# MS Windows +# +# On Windows Squid by default will monitor IP address changes and will +# reconfigure itself after any detected event. This is very useful for +# proxies connected to internet with dial-up interfaces. +# In some cases (a Proxy server acting as VPN gateway is one) it could be +# desiderable to disable this behaviour setting this to 'off'. +# Note: after changing this, Squid service must be restarted. +#Default: +# windows_ipaddrchangemonitor on + +# TAG: eui_lookup +# Whether to lookup the EUI or MAC address of a connected client. +#Default: +# eui_lookup on + +# TAG: max_filedescriptors +# Reduce the maximum number of filedescriptors supported below +# the usual operating system defaults. +# +# Remove from squid.conf to inherit the current ulimit setting. +# +# Note: Changing this requires a restart of Squid. Also +# not all I/O types supports large values (eg on Windows). +#Default: +# Use operating system limits set by ulimit. -- cgit v0.10-9-g596f From 9966ebcd8494083a1b87e7d368bedfffb5e5fe59 Mon Sep 17 00:00:00 2001 From: Tobias Wolf Date: Fri, 9 Nov 2018 23:48:56 +0100 Subject: Add new flag --show-body/-B to print body This should help with figuring out ia problem at a glance when enabled for healthz endpoints on web APIs, for example. The content of the body can point to what the problem is and help with diagnostics. Fixes #1559 diff --git a/plugins/check_http.c b/plugins/check_http.c index 1e2a54c..856e1e9 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -120,6 +120,7 @@ int use_ssl = FALSE; int use_sni = FALSE; int verbose = FALSE; int show_extended_perfdata = FALSE; +int show_body = FALSE; int sd; int min_page_len = 0; int max_page_len = 0; @@ -240,6 +241,7 @@ process_arguments (int argc, char **argv) {"use-ipv4", no_argument, 0, '4'}, {"use-ipv6", no_argument, 0, '6'}, {"extended-perfdata", no_argument, 0, 'E'}, + {"show-body", no_argument, 0, 'B'}, {0, 0, 0, 0} }; @@ -260,7 +262,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NEB", longopts, &option); if (c == -1 || c == EOF) break; @@ -547,6 +549,9 @@ process_arguments (int argc, char **argv) case 'E': /* show extended perfdata */ show_extended_perfdata = TRUE; break; + case 'B': /* print body content after status line */ + show_body = TRUE; + break; } } @@ -1300,6 +1305,9 @@ check_http (void) perfd_time (elapsed_time), perfd_size (page_len)); + if (show_body) + xasprintf (&msg, _("%s\n%s"), msg, page); + result = max_state_alt(get_status(elapsed_time, thlds), result); die (result, "HTTP %s: %s\n", state_text(result), msg); @@ -1621,6 +1629,8 @@ print_help (void) printf (" %s\n", _("Any other tags to be sent in http header. Use multiple times for additional headers")); printf (" %s\n", "-E, --extended-perfdata"); printf (" %s\n", _("Print additional performance data")); + printf (" %s\n", "-B, --show-body"); + printf (" %s\n", _("Print body content below status line")); printf (" %s\n", "-L, --link"); printf (" %s\n", _("Wrap output in HTML link (obsoleted by urlize)")); printf (" %s\n", "-f, --onredirect="); -- cgit v0.10-9-g596f From faea5899ba3264581bf75649e4b399d0b69bd125 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Mon, 12 Nov 2018 10:25:08 -0500 Subject: set hostname in for CURLOPT_CURL to virtual hostname in case of SSL (for SNI to work) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 58f454b..637e9ba 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -368,7 +368,7 @@ check_http (void) /* compose URL: use the address we want to connect to, set Host: header later */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", use_ssl ? "https" : "http", - server_address, + use_ssl ? host_name : server_address, server_port, server_url ); -- cgit v0.10-9-g596f From 910894a4e255cdb88e37f17a06f1393853544b84 Mon Sep 17 00:00:00 2001 From: Kostyantyn Hushchyn Date: Tue, 14 Dec 2010 12:51:25 +0200 Subject: check_cluster.c: Added data argument validation. Signed-off-by: Kostyantyn Hushchyn diff --git a/plugins/check_cluster.c b/plugins/check_cluster.c index b86e501..e1ede9f 100644 --- a/plugins/check_cluster.c +++ b/plugins/check_cluster.c @@ -143,6 +143,7 @@ int main(int argc, char **argv){ int process_arguments(int argc, char **argv){ int c; + char *ptr; int option=0; static struct option longopts[]={ {"data", required_argument,0,'d'}, @@ -188,6 +189,15 @@ int process_arguments(int argc, char **argv){ case 'd': /* data values */ data_vals=(char *)strdup(optarg); + /* validate data */ + for (ptr=data_vals;ptr!=NULL;ptr+=2){ + if (ptr[0]<'0' || ptr[0]>'3') + return ERROR; + if (ptr[1]=='\0') + break; + if (ptr[1]!=',') + return ERROR; + } break; case 'l': /* text label */ -- cgit v0.10-9-g596f From 19be129ff8986511e82fb2c628c04c28a080210b Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 4 Dec 2018 09:48:45 +0100 Subject: tests: enable plugins-root tests diff --git a/Makefile.am b/Makefile.am index 7e0d413..df1bcbb 100644 --- a/Makefile.am +++ b/Makefile.am @@ -34,6 +34,7 @@ test test-debug: if test "$(PERLMODS_DIR)" != ""; then cd perlmods && $(MAKE) $@; fi cd plugins && $(MAKE) $@ cd plugins-scripts && $(MAKE) $@ + cd plugins-root && $(MAKE) $@ # Solaris pkgmk BUILDDIR = build-solaris -- cgit v0.10-9-g596f From 660e0cf4e2968c97adeabf9ba91a54f1bd4ad240 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 4 Dec 2018 14:08:21 +0100 Subject: tests: skip some tests if Monitoring::Plugin::Range isn't available The check_file_age uses Monitoring::Plugin::Range internally. Skip thoses tests if the module isn't available. diff --git a/plugins-scripts/t/check_file_age.t b/plugins-scripts/t/check_file_age.t index ebf673f..8b87670 100644 --- a/plugins-scripts/t/check_file_age.t +++ b/plugins-scripts/t/check_file_age.t @@ -20,105 +20,74 @@ my $temp_link = "/tmp/check_file_age.link.tmp"; unlink $temp_file, $temp_link; -$result = NPTest->testCmd( - "./check_file_age" - ); +$result = NPTest->testCmd("./check_file_age"); cmp_ok( $result->return_code, '==', 3, "Missing parameters" ); like ( $result->output, $unknownOutput, "Output for unknown correct" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file"); cmp_ok( $result->return_code, '==', 2, "File not exists" ); like ( $result->output, $criticalOutput, "Output for file missing correct" ); write_chars(100); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file"); cmp_ok( $result->return_code, '==', 0, "File is new enough" ); like ( $result->output, $successOutput, "Output for success correct" ); sleep 2; -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -w 1" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -w 1"); cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old" ); like ( $result->output, $warningOutput, "Output for warning correct" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -w 0:1" - ); -cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old by range" ); -like ( $result->output, $warningOutput, "Output for warning by range correct" ); - -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1"); cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old" ); like ( $result->output, $criticalOutput, "Output for critical correct" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 0:1" - ); -cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old by range" ); -like ( $result->output, $criticalOutput, "Output for critical by range correct" ); - -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 100" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100"); cmp_ok( $result->return_code, '==', 0, "Checking file size" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 0:1000 -W 0:100" - ); -cmp_ok( $result->return_code, '==', 0, "Checking file size by range" ); - -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 100" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100"); like( $result->output, $performanceOutput, "Checking for performance Output" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 100" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100"); like( $result->output, $performanceOutput, "Checking for performance Output from range" ); -$result = NPTest->testCmd( - "./check_file_age -f /non/existent --ignore-missing" - ); +$result = NPTest->testCmd("./check_file_age -f /non/existent --ignore-missing"); cmp_ok( $result->return_code, '==', 0, "Honours --ignore-missing" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 101" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 101"); cmp_ok( $result->return_code, '==', 1, "One byte too short" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 101:" - ); -cmp_ok( $result->return_code, '==', 1, "One byte too short by range" ); - -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -C 101" - ); +$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 101"); cmp_ok( $result->return_code, '==', 2, "One byte too short - critical" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -C 101:" - ); -cmp_ok( $result->return_code, '==', 2, "One byte too short by range - critical" ); +SKIP: { + eval 'use Monitoring::Plugin::Range'; + skip "Monitoring::Plugin::Range module require", 9 if $@; + + $result = NPTest->testCmd("./check_file_age -f $temp_file -w 0:1"); + cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old by range" ); + like ( $result->output, $warningOutput, "Output for warning by range correct" ); + + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 0:1"); + cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old by range" ); + like ( $result->output, $criticalOutput, "Output for critical by range correct" ); + + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 0:1000 -W 0:100"); + cmp_ok( $result->return_code, '==', 0, "Checking file size by range" ); + + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 101:"); + cmp_ok( $result->return_code, '==', 1, "One byte too short by range" ); + + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 0:99"); + cmp_ok( $result->return_code, '==', 1, "One byte too long by range" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -W 0:99" - ); -cmp_ok( $result->return_code, '==', 1, "One byte too long by range" ); + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 101:"); + cmp_ok( $result->return_code, '==', 2, "One byte too short by range - critical" ); -$result = NPTest->testCmd( - "./check_file_age -f $temp_file -c 1000 -C 0:99" - ); -cmp_ok( $result->return_code, '==', 2, "One byte too long by range - critical" ); + $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 0:99"); + cmp_ok( $result->return_code, '==', 2, "One byte too long by range - critical" ); +}; symlink $temp_file, $temp_link or die "Cannot create symlink"; $result = NPTest->testCmd("./check_file_age -f $temp_link -c 10"); -- cgit v0.10-9-g596f From b69eb5afed40f14ba648c3358e2b46aeb75b0c5d Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 4 Dec 2018 09:50:25 +0100 Subject: NPTest: unify whitespace diff --git a/NPTest.pm b/NPTest.pm index f72ed2d..2248e8e 100644 --- a/NPTest.pm +++ b/NPTest.pm @@ -53,8 +53,8 @@ developer to interactively request test parameter information from the user. The user can accept the developer's default value or reply "none" which will then be returned as "" for the test to skip if appropriate. -If a parameter needs to be entered and the test is run without a tty -attached (such as a cronjob), the parameter will be assigned as if it +If a parameter needs to be entered and the test is run without a tty +attached (such as a cronjob), the parameter will be assigned as if it was "none". Tests can check for the parameter and skip if not set. Responses are stored in an external, file-based cache so subsequent test @@ -249,26 +249,26 @@ sub checkCmd { if ( scalar( grep { $_ == $exitStatus } @{$desiredExitStatus} ) ) { - $desiredExitStatus = $exitStatus; + $desiredExitStatus = $exitStatus; } else { - $desiredExitStatus = -1; + $desiredExitStatus = -1; } } elsif ( ref $desiredExitStatus eq "HASH" ) { if ( exists( ${$desiredExitStatus}{$exitStatus} ) ) { - if ( defined( ${$desiredExitStatus}{$exitStatus} ) ) - { - $testOutput = ${$desiredExitStatus}{$exitStatus}; - } - $desiredExitStatus = $exitStatus; + if ( defined( ${$desiredExitStatus}{$exitStatus} ) ) + { + $testOutput = ${$desiredExitStatus}{$exitStatus}; + } + $desiredExitStatus = $exitStatus; } else { - $desiredExitStatus = -1; + $desiredExitStatus = -1; } } @@ -332,12 +332,12 @@ sub getTestParameter my( $param, $envvar, $default, $brief, $scoped ); my $new_style; if (scalar @_ <= 3) { - ($param, $brief, $default) = @_; - $envvar = $param; - $new_style = 1; + ($param, $brief, $default) = @_; + $envvar = $param; + $new_style = 1; } else { - ( $param, $envvar, $default, $brief, $scoped ) = @_; - $new_style = 0; + ( $param, $envvar, $default, $brief, $scoped ) = @_; + $new_style = 0; } # Apply default values for optional arguments @@ -394,7 +394,7 @@ sub getTestParameter print STDERR "\n"; if ($userResponse =~ /^(na|none)$/) { - $userResponse = ""; + $userResponse = ""; } # define all user responses at global scope @@ -422,7 +422,7 @@ sub SearchCache { return $CACHE{$param}; } - return undef; # Need this to say "nothing found" + return undef; # Need this to say "nothing found" } sub SetCacheParameter @@ -542,10 +542,10 @@ sub DetermineTestHarnessDirectory push ( @dirs, "./tests"); } - if ( @dirs > 0 ) - { - return @dirs; - } + if ( @dirs > 0 ) + { + return @dirs; + } # To be honest I don't understand which case satisfies the # original code in test.pl : when $tstdir == `pwd` w.r.t. @@ -611,73 +611,73 @@ sub TestsFrom # All the new object oriented stuff below -sub new { - my $type = shift; - my $self = {}; - return bless $self, $type; +sub new { + my $type = shift; + my $self = {}; + return bless $self, $type; } # Accessors sub return_code { - my $self = shift; - if (@_) { - return $self->{return_code} = shift; - } else { - return $self->{return_code}; - } + my $self = shift; + if (@_) { + return $self->{return_code} = shift; + } else { + return $self->{return_code}; + } } sub output { - my $self = shift; - if (@_) { - return $self->{output} = shift; - } else { - return $self->{output}; - } + my $self = shift; + if (@_) { + return $self->{output} = shift; + } else { + return $self->{output}; + } } sub perf_output { - my $self = shift; - $_ = $self->{output}; - /\|(.*)$/; - return $1 || ""; + my $self = shift; + $_ = $self->{output}; + /\|(.*)$/; + return $1 || ""; } sub only_output { - my $self = shift; - $_ = $self->{output}; - /(.*?)\|/; - return $1 || ""; + my $self = shift; + $_ = $self->{output}; + /(.*?)\|/; + return $1 || ""; } sub testCmd { - my $class = shift; - my $command = shift or die "No command passed to testCmd"; - my $timeout = shift || 120; - my $object = $class->new; - - local $SIG{'ALRM'} = sub { die("timeout in command: $command"); }; - alarm($timeout); # no test should take longer than 120 seconds - - my $output = `$command`; - $object->return_code($? >> 8); - $_ = $? & 127; - if ($_) { - die "Got signal $_ for command $command"; - } - chomp $output; - $object->output($output); - - alarm(0); - - my ($pkg, $file, $line) = caller(0); - print "Testing: $command", $/; - if ($ENV{'NPTEST_DEBUG'}) { - print "testCmd: Called from line $line in $file", $/; - print "Output: ", $object->output, $/; - print "Return code: ", $object->return_code, $/; - } - - return $object; + my $class = shift; + my $command = shift or die "No command passed to testCmd"; + my $timeout = shift || 120; + my $object = $class->new; + + local $SIG{'ALRM'} = sub { die("timeout in command: $command"); }; + alarm($timeout); # no test should take longer than 120 seconds + + my $output = `$command`; + $object->return_code($? >> 8); + $_ = $? & 127; + if ($_) { + die "Got signal $_ for command $command"; + } + chomp $output; + $object->output($output); + + alarm(0); + + my ($pkg, $file, $line) = caller(0); + print "Testing: $command", $/; + if ($ENV{'NPTEST_DEBUG'}) { + print "testCmd: Called from line $line in $file", $/; + print "Output: ", $object->output, $/; + print "Return code: ", $object->return_code, $/; + } + + return $object; } # do we have ipv6 -- cgit v0.10-9-g596f From d7dcca22ae2f7bdf0ee2282e00c1999de0b58e26 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 4 Dec 2018 15:20:18 +0100 Subject: tests: rework test parameters there were 2 variants of calling getTestParameter: - parameter, description, default value - parameter, env value, default value, description, scope While scope was never actually used and having 2 names for the same value led to having 2 different entries in the cache file for the same configuration. This commit removes the variants and simplifies tests parameters by only using the first 3 parameter variant. diff --git a/.travis.yml b/.travis.yml index 123e178..712f247 100644 --- a/.travis.yml +++ b/.travis.yml @@ -42,9 +42,6 @@ before_install: - sudo add-apt-repository -y ppa:waja/trusty-backports - sudo apt-get update -qq - sudo apt-get purge -qq gawk - # http://docs.travis-ci.com/user/trusty-ci-environment/ indicates, no MySQL on Trusty (yet) - # # ensure we have a test database in place for tests - # - mysql -e "create database IF NOT EXISTS test;" -uroot install: - sudo apt-get install -qq --no-install-recommends perl autotools-dev libdbi-dev libldap2-dev libpq-dev libmysqlclient-dev libradcli-dev libkrb5-dev libnet-snmp-perl procps @@ -74,6 +71,7 @@ before_script: - tools/setup - ./configure --enable-libtap - make + - export NPTEST_ACCEPTDEFAULT=1 - export NPTEST_CACHE="$(pwd)/plugins/t/NPTest.cache.travis" - ssh-keygen -t dsa -N "" -f ~/.ssh/id_dsa - cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys @@ -82,7 +80,7 @@ before_script: - sudo rm -f /usr/share/mibs/ietf/SNMPv2-PDU /usr/share/mibs/ietf/IPSEC-SPD-MIB /usr/share/mibs/ietf/IPATM-IPMC-MIB /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB - sudo mkdir -p /var/lib/snmp/mib_indexes - sudo mkdir /media/ramdisk && sudo chmod 777 /media/ramdisk && sudo mount -t tmpfs -o size=20% none /media/ramdisk - - sed "/host_tls_cert/s/.*/'host_tls_cert' => '$(hostname)',/" -i $NPTEST_CACHE + - sed "/NP_HOST_TLS_CERT/s/.*/'NP_HOST_TLS_CERT' => '$(hostname)',/" -i $NPTEST_CACHE script: - if [ "$COVERITY_SCAN_BRANCH" != 1 ]; then make test; fi diff --git a/NPTest.pm b/NPTest.pm index 2248e8e..4b2de39 100644 --- a/NPTest.pm +++ b/NPTest.pm @@ -62,17 +62,6 @@ runs will use these values. The user is able to change the values by amending the values in the file /var/tmp/NPTest.cache, or by setting the appropriate environment variable before running the test. -The option exists to store parameters in a scoped means, allowing a -test harness to a localise a parameter should the need arise. This -allows a parameter of the same name to exist in a test harness -specific scope, while not affecting the globally scoped parameter. The -scoping identifier is the name of the test harness sans the trailing -".t". All cache searches first look to a scoped parameter before -looking for the parameter at global scope. Thus for a test harness -called "check_disk.t" requesting the parameter "mountpoint_valid", the -cache is first searched for "check_disk"/"mountpoint_valid", if this -fails, then a search is conducted for "mountpoint_valid". - To facilitate quick testing setup, it is possible to accept all the developer provided defaults by setting the environment variable "NPTEST_ACCEPTDEFAULT" to "1" (or any other perl truth value). Note @@ -327,78 +316,51 @@ sub skipMsg return $testStatus; } -sub getTestParameter -{ - my( $param, $envvar, $default, $brief, $scoped ); - my $new_style; - if (scalar @_ <= 3) { - ($param, $brief, $default) = @_; - $envvar = $param; - $new_style = 1; - } else { - ( $param, $envvar, $default, $brief, $scoped ) = @_; - $new_style = 0; - } - - # Apply default values for optional arguments - $scoped = ( defined( $scoped ) && $scoped ); +sub getTestParameter { + my($param, $description, $default) = @_; - my $testharness = basename( (caller(0))[1], ".t" ); # used for scoping - - if ( defined( $envvar ) && exists( $ENV{$envvar} ) && $ENV{$envvar} ) - { - return $ENV{$envvar}; + if($param !~ m/^NP_[A-Z0-9_]+$/mx) { + die("parameter should be all uppercase and start with NP_ (requested from ".(caller(0))[1].")"); } - my $cachedValue = SearchCache( $param, $testharness ); - if ( defined( $cachedValue ) ) - { - # This save required to convert to new style because the key required is - # changing to the environment variable - if ($new_style == 0) { - SetCacheParameter( $envvar, undef, $cachedValue ); - } + return $ENV{$param} if $ENV{$param}; + + my $cachedValue = SearchCache($param); + if(defined $cachedValue) { return $cachedValue; } - my $defaultValid = ( defined( $default ) && $default ); - my $autoAcceptDefault = ( exists( $ENV{'NPTEST_ACCEPTDEFAULT'} ) && $ENV{'NPTEST_ACCEPTDEFAULT'} ); - - if ( $autoAcceptDefault && $defaultValid ) - { - return $default; + if($ENV{'NPTEST_ACCEPTDEFAULT'}) { + return $default if $default; + return ""; } # Set "none" if no terminal attached (eg, tinderbox build servers when new variables set) return "" unless (-t STDIN); my $userResponse = ""; - - while ( $userResponse eq "" ) - { + while($userResponse eq "") { print STDERR "\n"; - print STDERR "Test Harness : $testharness\n"; - print STDERR "Test Parameter : $param\n"; - print STDERR "Environment Variable : $envvar\n" if ($param ne $envvar); - print STDERR "Brief Description : $brief\n"; - print STDERR "Enter value (or 'none') ", ($defaultValid ? "[${default}]" : "[]"), " => "; + print STDERR "Test File : ".(caller(0))[1]."\n"; + print STDERR "Test Parameter : $param\n"; + print STDERR "Description : $description\n"; + print STDERR "Enter value (or 'none') ", ($default ? "[${default}]" : "[]"), " => "; $userResponse = ; $userResponse = "" if ! defined( $userResponse ); # Handle EOF - chomp( $userResponse ); - if ( $defaultValid && $userResponse eq "" ) - { + chomp($userResponse); + if($default && $userResponse eq "") { $userResponse = $default; } } print STDERR "\n"; - if ($userResponse =~ /^(na|none)$/) { + if($userResponse =~ /^(na|none)$/) { $userResponse = ""; } - # define all user responses at global scope - SetCacheParameter( $param, ( $scoped ? $testharness : undef ), $userResponse ); + # store user responses + SetCacheParameter($param, $userResponse); return $userResponse; } @@ -407,37 +369,20 @@ sub getTestParameter # Internal Cache Management Functions # -sub SearchCache -{ - my( $param, $scope ) = @_; +sub SearchCache { + my($param) = @_; LoadCache(); - if ( exists( $CACHE{$scope} ) && exists( $CACHE{$scope}{$param} ) ) - { - return $CACHE{$scope}{$param}; - } - - if ( exists( $CACHE{$param} ) ) - { + if(exists $CACHE{$param}) { return $CACHE{$param}; } return undef; # Need this to say "nothing found" } -sub SetCacheParameter -{ - my( $param, $scope, $value ) = @_; - - if ( defined( $scope ) ) - { - $CACHE{$scope}{$param} = $value; - } - else - { - $CACHE{$param} = $value; - } - +sub SetCacheParameter { + my($param, $value) = @_; + $CACHE{$param} = $value; SaveCache(); } @@ -475,6 +420,11 @@ sub SaveCache delete $CACHE{'_cache_loaded_'}; my $oldFileContents = delete $CACHE{'_original_cache'}; + # clean up old style params + for my $key (keys %CACHE) { + delete $CACHE{$key} if $key !~ m/^NP_[A-Z0-9_]+$/mx; + } + my($dataDumper) = new Data::Dumper([\%CACHE]); $dataDumper->Terse(1); $dataDumper->Sortkeys(1); @@ -486,7 +436,7 @@ sub SaveCache if($oldFileContents ne $data) { my($fileHandle) = new IO::File; if (!$fileHandle->open( "> ${CACHEFILENAME}")) { - print STDERR "NPTest::LoadCache() : Problem saving ${CACHEFILENAME} : $!\n"; + print STDERR "NPTest::SaveCache() : Problem saving ${CACHEFILENAME} : $!\n"; return; } print $fileHandle $data; diff --git a/plugins/t/NPTest.cache.travis b/plugins/t/NPTest.cache.travis index 28437a0..6ee4505 100644 --- a/plugins/t/NPTest.cache.travis +++ b/plugins/t/NPTest.cache.travis @@ -1,64 +1,54 @@ { - 'MYSQL_LOGIN_DETAILS' => '-u root -d test', 'NP_ALLOW_SUDO' => 'yes', 'NP_DNS_SERVER' => '8.8.8.8', 'NP_GOOD_NTP_SERVICE' => '', + 'NP_HOST_DHCP_RESPONSIVE' => '', + 'NP_HOST_HPJD_PORT_INVALID' => '161', + 'NP_HOST_HPJD_PORT_VALID' => '', + 'NP_HOSTNAME_INVALID_CIDR' => '130.133.8.39/30', 'NP_HOSTNAME_INVALID' => 'nosuchhost', - 'NP_HOSTNAME_VALID' => 'monitoring-plugins.org', - 'NP_HOSTNAME_VALID_IP' => '130.133.8.40', 'NP_HOSTNAME_VALID_CIDR' => '130.133.8.41/30', - 'NP_HOSTNAME_INVALID_CIDR' => '130.133.8.39/30', + 'NP_HOSTNAME_VALID_IP' => '130.133.8.40', + 'NP_HOSTNAME_VALID' => 'monitoring-plugins.org', 'NP_HOSTNAME_VALID_REVERSE' => 'orwell.monitoring-plugins.org.', - 'NP_HOST_DHCP_RESPONSIVE' => '', 'NP_HOST_NONRESPONSIVE' => '10.0.0.1', 'NP_HOST_RESPONSIVE' => 'localhost', 'NP_HOST_SMB' => '', - 'NP_HOST_SNMP' => 'localhost', + 'NP_HOST_SNMP' => '', 'NP_HOST_TCP_FTP' => '', 'NP_HOST_TCP_HPJD' => '', - 'NP_HOST_HPJD_PORT_INVALID' => '161', - 'NP_HOST_HPJD_PORT_VALID' => '', - 'NP_HOST_TCP_HTTP' => 'localhost', 'NP_HOST_TCP_HTTP2' => 'test.monitoring-plugins.org', + 'NP_HOST_TCP_HTTP' => 'localhost', 'NP_HOST_TCP_IMAP' => 'imap.web.de', + 'NP_HOST_TCP_JABBER' => 'jabber.org', 'NP_HOST_TCP_LDAP' => 'localhost', 'NP_HOST_TCP_POP' => 'pop.web.de', + 'NP_HOST_TCP_PROXY' => 'localhost', 'NP_HOST_TCP_SMTP' => 'localhost', 'NP_HOST_TCP_SMTP_NOTLS' => '', 'NP_HOST_TCP_SMTP_TLS' => '', + 'NP_HOST_TLS_CERT' => 'localhost, + 'NP_HOST_TLS_HTTP' => 'localhost', + 'NP_HOST_UDP_TIME' => 'none', 'NP_INTERNET_ACCESS' => 'yes', 'NP_LDAP_BASE_DN' => 'cn=admin,dc=nodomain', 'NP_MOUNTPOINT2_VALID' => '/media/ramdisk', 'NP_MOUNTPOINT_VALID' => '/', + 'NP_MYSQL_LOGIN_DETAILS' => '-u root -d test', 'NP_MYSQL_SERVER' => 'localhost', - 'NP_HOST_UDP_TIME' => 'localhost', 'NP_MYSQL_SOCKET' => '/var/run/mysqld/mysqld.sock', 'NP_MYSQL_WITH_SLAVE' => '', 'NP_MYSQL_WITH_SLAVE_LOGIN' => '', 'NP_NO_NTP_SERVICE' => 'localhost', + 'NP_PORT_TCP_PROXY' => '3128', 'NP_SMB_SHARE' => '', 'NP_SMB_SHARE_DENY' => '', 'NP_SMB_SHARE_SPC' => '', 'NP_SMB_VALID_USER' => '', 'NP_SMB_VALID_USER_PASS' => '', - 'NP_SNMP_COMMUNITY' => 'public', + 'NP_SNMP_COMMUNITY' => '', + 'NP_SNMP_USER' => '', 'NP_SSH_CONFIGFILE' => '~/.ssh/config', 'NP_SSH_HOST' => 'localhost', - 'NP_SSH_IDENTITY' => '~/.ssh/id_dsa', - 'NP_HOST_TCP_JABBER' => 'jabber.org', - 'host_nonresponsive' => '10.0.0.1', - 'host_responsive' => 'localhost', - 'host_snmp' => '', - 'host_tcp_ftp' => '', - 'host_tcp_http' => 'localhost', - 'host_tcp_imap' => 'imap.nierlein.de', - 'host_tcp_smtp' => 'localhost', - 'hostname_invalid' => 'nosuchhost', - 'snmp_community' => '', - 'user_snmp' => '', - 'host_udp_time' => 'none', - 'host_tls_http' => 'localhost', - 'host_tls_cert' => 'localhost', - 'NP_HOST_TCP_PROXY' => 'localhost', - 'NP_PORT_TCP_PROXY' => '3128', + 'NP_SSH_IDENTITY' => '~/.ssh/id_dsa' } diff --git a/plugins/t/check_by_ssh.t b/plugins/t/check_by_ssh.t index 4797390..1d2939e 100644 --- a/plugins/t/check_by_ssh.t +++ b/plugins/t/check_by_ssh.t @@ -9,17 +9,9 @@ use Test::More; use NPTest; # Required parameters -my $ssh_service = getTestParameter( "NP_SSH_HOST", - "A host providing SSH service", - "localhost"); - -my $ssh_key = getTestParameter( "NP_SSH_IDENTITY", - "A key allowing access to NP_SSH_HOST", - "~/.ssh/id_dsa"); - -my $ssh_conf = getTestParameter( "NP_SSH_CONFIGFILE", - "A config file with ssh settings", - "~/.ssh/config"); +my $ssh_service = getTestParameter("NP_SSH_HOST", "A host providing SSH service", "localhost"); +my $ssh_key = getTestParameter("NP_SSH_IDENTITY", "A key allowing access to NP_SSH_HOST", "~/.ssh/id_dsa"); +my $ssh_conf = getTestParameter( "NP_SSH_CONFIGFILE", "A config file with ssh settings", "~/.ssh/config"); plan skip_all => "SSH_HOST and SSH_IDENTITY must be defined" unless ($ssh_service && $ssh_key); diff --git a/plugins/t/check_fping.t b/plugins/t/check_fping.t index 08692e4..342b0a7 100644 --- a/plugins/t/check_fping.t +++ b/plugins/t/check_fping.t @@ -15,15 +15,9 @@ BEGIN {$tests = 4; plan tests => $tests} my $successOutput = '/^FPING OK - /'; my $failureOutput = '/^FPING CRITICAL - /'; -my $host_responsive = getTestParameter( "host_responsive", "NP_HOST_RESPONSIVE", "localhost", - "The hostname of system responsive to network requests" ); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); - +my $host_responsive = getTestParameter("NP_HOST_RESPONSIVE", "The hostname of system responsive to network requests", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my $t; diff --git a/plugins/t/check_ftp.t b/plugins/t/check_ftp.t index de6831b..93a7d7c 100644 --- a/plugins/t/check_ftp.t +++ b/plugins/t/check_ftp.t @@ -11,14 +11,9 @@ use NPTest; use vars qw($tests); BEGIN {$tests = 4; plan tests => $tests} -my $host_tcp_ftp = getTestParameter( "host_tcp_ftp", "NP_HOST_TCP_FTP", "localhost", - "A host providing the FTP Service (an FTP server)"); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); +my $host_tcp_ftp = getTestParameter("NP_HOST_TCP_FTP", "A host providing the FTP Service (an FTP server)", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my $successOutput = '/FTP OK -\s+[0-9]?\.?[0-9]+ second response time/'; diff --git a/plugins/t/check_http.t b/plugins/t/check_http.t index 416fbbc..b3760eb 100644 --- a/plugins/t/check_http.t +++ b/plugins/t/check_http.t @@ -9,46 +9,21 @@ use Test::More; use POSIX qw/mktime strftime/; use NPTest; -plan tests => 55; +plan tests => 50; my $successOutput = '/OK.*HTTP.*second/'; my $res; -my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", - "A host providing the HTTP Service (a web server)", - "localhost" ); - -my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", - "A host providing the HTTPS Service (a tls web server)" ); - -my $host_tls_cert = getTestParameter( "host_tls_cert", "NP_HOST_TLS_CERT", "localhost", - "the common name of the certificate." ); - - -my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", - "The hostname of system not responsive to network requests", - "10.0.0.1" ); - -my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", - "An invalid (not known to DNS) hostname", - "nosuchhost"); - -my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", - "Is this system directly connected to the internet?", - "yes"); - -my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", - "A host providing an index page containing the string 'monitoring'", - "test.monitoring-plugins.org" ); - -my $host_tcp_proxy = getTestParameter( "NP_HOST_TCP_PROXY", - "A host providing a HTTP proxy with CONNECT support", - "localhost"); - -my $port_tcp_proxy = getTestParameter( "NP_PORT_TCP_PROXY", - "Port of the proxy with HTTP and CONNECT support", - "3128"); +my $host_tcp_http = getTestParameter("NP_HOST_TCP_HTTP", "A host providing the HTTP Service (a web server)", "localhost"); +my $host_tls_http = getTestParameter("NP_HOST_TLS_HTTP", "A host providing the HTTPS Service (a tls web server)", "localhost"); +my $host_tls_cert = getTestParameter("NP_HOST_TLS_CERT", "the common name of the certificate.", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); +my $internet_access = getTestParameter("NP_INTERNET_ACCESS", "Is this system directly connected to the internet?", "yes"); +my $host_tcp_http2 = getTestParameter("NP_HOST_TCP_HTTP2", "A host providing an index page containing the string 'monitoring'", "test.monitoring-plugins.org"); +my $host_tcp_proxy = getTestParameter("NP_HOST_TCP_PROXY", "A host providing a HTTP proxy with CONNECT support", "localhost"); +my $port_tcp_proxy = getTestParameter("NP_PORT_TCP_PROXY", "Port of the proxy with HTTP and CONNECT support", "3128"); my $faketime = -x '/usr/bin/faketime' ? 1 : 0; @@ -158,7 +133,7 @@ SKIP: { # run some certificate checks with faketime SKIP: { - skip "No faketime binary found", 12 if !$faketime; + skip "No faketime binary found", 7 if !$faketime; $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./check_http -C 1 $host_tls_http"); like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); is( $res->return_code, 0, "Catch cert output exit code" ); @@ -171,23 +146,18 @@ SKIP: { my $time = strftime("%Y-%m-%d %H:%M:%S", localtime($ts)); $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_http -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' just expired/, "Output on expire date"); - is( $res->return_code, 2, "Output on expire date" ); $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-1))."' ./check_http -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 0 minutes/, "cert expires in 1 second output"); - is( $res->return_code, 2, "cert expires in 1 second exit code" ); $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-120))."' ./check_http -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 minutes/, "cert expires in 2 minutes output"); - is( $res->return_code, 2, "cert expires in 2 minutes exit code" ); $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts-7200))."' ./check_http -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expires in 2 hours/, "cert expires in 2 hours output"); - is( $res->return_code, 2, "cert expires in 2 hours exit code" ); $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_http -C 1 $host_tls_http"); like($res->output, qr/CRITICAL - Certificate '$host_tls_cert' expired on/, "Certificate expired output"); - is( $res->return_code, 2, "Certificate expired exit code" ); }; $res = NPTest->testCmd( "./check_http --ssl $host_tls_http -E" ); diff --git a/plugins/t/check_imap.t b/plugins/t/check_imap.t index 9c6eae1..7c74e56 100644 --- a/plugins/t/check_imap.t +++ b/plugins/t/check_imap.t @@ -8,17 +8,10 @@ use strict; use Test::More tests => 7; use NPTest; -my $host_tcp_smtp = getTestParameter( "host_tcp_smtp", "NP_HOST_TCP_SMTP", "mailhost", - "A host providing an STMP Service (a mail server)"); - -my $host_tcp_imap = getTestParameter( "host_tcp_imap", "NP_HOST_TCP_IMAP", $host_tcp_smtp, - "A host providing an IMAP Service (a mail server)"); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); +my $host_tcp_smtp = getTestParameter("NP_HOST_TCP_SMTP", "A host providing an STMP Service (a mail server)", "mailhost"); +my $host_tcp_imap = getTestParameter("NP_HOST_TCP_IMAP", "A host providing an IMAP Service (a mail server)", $host_tcp_smtp); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my $t; diff --git a/plugins/t/check_jabber.t b/plugins/t/check_jabber.t index 7a708d5..fcdae17 100644 --- a/plugins/t/check_jabber.t +++ b/plugins/t/check_jabber.t @@ -10,23 +10,9 @@ use NPTest; plan tests => 10; -my $host_tcp_jabber = getTestParameter( - "NP_HOST_TCP_JABBER", - "A host providing the Jabber Service", - "jabber.org" - ); - -my $host_nonresponsive = getTestParameter( - "NP_HOST_NONRESPONSIVE", - "The hostname of system not responsive to network requests", - "10.0.0.1", - ); - -my $hostname_invalid = getTestParameter( - "NP_HOSTNAME_INVALID", - "An invalid (not known to DNS) hostname", - "nosuchhost", - ); +my $host_tcp_jabber = getTestParameter("NP_HOST_TCP_JABBER", "A host providing the Jabber Service", "jabber.de"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my $jabberOK = '/JABBER OK\s-\s\d+\.\d+\ssecond response time on '.$host_tcp_jabber.' port 5222/'; diff --git a/plugins/t/check_ldap.t b/plugins/t/check_ldap.t index b8944d4..b8a4a76 100644 --- a/plugins/t/check_ldap.t +++ b/plugins/t/check_ldap.t @@ -9,19 +9,10 @@ use warnings; use Test::More; use NPTest; -my $host_tcp_ldap = getTestParameter("NP_HOST_TCP_LDAP", - "A host providing the LDAP Service", - "localhost" ); - -my $ldap_base_dn = getTestParameter("NP_LDAP_BASE_DN", - "A base dn for the LDAP Service", - "cn=admin" ); - -my $host_nonresponsive = getTestParameter("host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter("hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); +my $host_tcp_ldap = getTestParameter("NP_HOST_TCP_LDAP", "A host providing the LDAP Service", "localhost"); +my $ldap_base_dn = getTestParameter("NP_LDAP_BASE_DN", "A base dn for the LDAP Service", "cn=admin"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my($result, $cmd); my $command = './check_ldap'; diff --git a/plugins/t/check_mysql.t b/plugins/t/check_mysql.t index 28cd4cd..e426bf5 100644 --- a/plugins/t/check_mysql.t +++ b/plugins/t/check_mysql.t @@ -21,30 +21,11 @@ plan skip_all => "check_mysql not compiled" unless (-x "check_mysql"); plan tests => 15; my $bad_login_output = '/Access denied for user /'; -my $mysqlserver = getTestParameter( - "NP_MYSQL_SERVER", - "A MySQL Server hostname or IP with no slaves setup" - ); -my $mysqlsocket = getTestParameter( - "NP_MYSQL_SOCKET", - "Full path to a MySQL Server socket with no slaves setup" - ); -my $mysql_login_details = getTestParameter( - "MYSQL_LOGIN_DETAILS", - "Command line parameters to specify login access (requires " . - "REPLICATION CLIENT privleges)", - "-u test -ptest", - ); -my $with_slave = getTestParameter( - "NP_MYSQL_WITH_SLAVE", - "MySQL server with slaves setup" - ); -my $with_slave_login = getTestParameter( - "NP_MYSQL_WITH_SLAVE_LOGIN", - "Login details for server with slave (requires REPLICATION CLIENT " . - "privleges)", - $mysql_login_details || "-u test -ptest" - ); +my $mysqlserver = getTestParameter("NP_MYSQL_SERVER", "A MySQL Server hostname or IP with no slaves setup"); +my $mysqlsocket = getTestParameter("NP_MYSQL_SOCKET", "Full path to a MySQL Server socket with no slaves setup"); +my $mysql_login_details = getTestParameter("NP_MYSQL_LOGIN_DETAILS", "Command line parameters to specify login access (requires REPLICATION CLIENT privleges)", "-u test -ptest"); +my $with_slave = getTestParameter("NP_MYSQL_WITH_SLAVE", "MySQL server with slaves setup"); +my $with_slave_login = getTestParameter("NP_MYSQL_WITH_SLAVE_LOGIN", "Login details for server with slave (requires REPLICATION CLIENT privleges)", $mysql_login_details || "-u test -ptest"); my $result; diff --git a/plugins/t/check_mysql_query.t b/plugins/t/check_mysql_query.t index 407af88..96899ac 100644 --- a/plugins/t/check_mysql_query.t +++ b/plugins/t/check_mysql_query.t @@ -17,15 +17,8 @@ use vars qw($tests); plan skip_all => "check_mysql_query not compiled" unless (-x "check_mysql_query"); -my $mysqlserver = getTestParameter( - "NP_MYSQL_SERVER", - "A MySQL Server with no slaves setup" - ); -my $mysql_login_details = getTestParameter( - "MYSQL_LOGIN_DETAILS", - "Command line parameters to specify login access", - "-u user -ppw -d db", - ); +my $mysqlserver = getTestParameter("NP_MYSQL_SERVER", "A MySQL Server with no slaves setup"); +my $mysql_login_details = getTestParameter("NP_MYSQL_LOGIN_DETAILS", "Command line parameters to specify login access", "-u user -ppw -d db"); my $result; if (! $mysqlserver) { diff --git a/plugins/t/check_snmp.t b/plugins/t/check_snmp.t index 9a6cd2b..f2f218f 100644 --- a/plugins/t/check_snmp.t +++ b/plugins/t/check_snmp.t @@ -15,18 +15,12 @@ BEGIN { my $res; -my $host_snmp = getTestParameter( "host_snmp", "NP_HOST_SNMP", "localhost", - "A host providing an SNMP Service"); +my $host_snmp = getTestParameter("NP_HOST_SNMP", "A host providing an SNMP Service", "localhost"); +my $snmp_community = getTestParameter("NP_SNMP_COMMUNITY", "The SNMP Community string for SNMP Testing (assumes snmp v1)", "public"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); +my $user_snmp = getTestParameter("NP_SNMP_USER", "An SNMP user", "auth_md5"); -my $snmp_community = getTestParameter( "snmp_community", "NP_SNMP_COMMUNITY", "public", - "The SNMP Community string for SNMP Testing (assumes snmp v1)" ); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); -my $user_snmp = getTestParameter( "user_snmp", "NP_SNMP_USER", "auth_md5", "An SNMP user"); $res = NPTest->testCmd( "./check_snmp -t 1" ); is( $res->return_code, 3, "No host name" ); diff --git a/plugins/t/check_ssh.t b/plugins/t/check_ssh.t index 8008349..a5cd23c 100644 --- a/plugins/t/check_ssh.t +++ b/plugins/t/check_ssh.t @@ -9,17 +9,9 @@ use Test::More; use NPTest; # Required parameters -my $ssh_host = getTestParameter("NP_SSH_HOST", - "A host providing SSH service", - "localhost"); - -my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", - "The hostname of system not responsive to network requests", - "10.0.0.1" ); - -my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", - "An invalid (not known to DNS) hostname", - "nosuchhost" ); +my $ssh_host = getTestParameter("NP_SSH_HOST", "A host providing SSH service", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1" ); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost" ); plan skip_all => "SSH_HOST must be defined" unless $ssh_host; diff --git a/plugins/t/check_tcp.t b/plugins/t/check_tcp.t index 121b0cb..cb4de53 100644 --- a/plugins/t/check_tcp.t +++ b/plugins/t/check_tcp.t @@ -15,21 +15,11 @@ BEGIN { } -my $host_tcp_http = getTestParameter( "host_tcp_http", "NP_HOST_TCP_HTTP", "localhost", - "A host providing the HTTP Service (a web server)" ); - -my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", - "A host providing the HTTPS Service (a tls web server)" ); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); - -my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", - "Is this system directly connected to the internet?", - "yes"); +my $host_tcp_http = getTestParameter("NP_HOST_TCP_HTTP", "A host providing the HTTP Service (a web server)", "localhost"); +my $host_tls_http = getTestParameter("NP_HOST_TLS_HTTP", "A host providing the HTTPS Service (a tls web server)", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); +my $internet_access = getTestParameter("NP_INTERNET_ACCESS", "Is this system directly connected to the internet?", "yes"); my $successOutput = '/^TCP OK\s-\s+[0-9]?\.?[0-9]+ second response time on port [0-9]+/'; diff --git a/plugins/t/check_time.t b/plugins/t/check_time.t index 961f56e..92c2f89 100644 --- a/plugins/t/check_time.t +++ b/plugins/t/check_time.t @@ -11,14 +11,9 @@ use NPTest; use vars qw($tests); BEGIN {$tests = 8; plan tests => $tests} -my $host_udp_time = getTestParameter( "host_udp_time", "NP_HOST_UDP_TIME", "localhost", - "A host providing the UDP Time Service" ); - -my $host_nonresponsive = getTestParameter( "host_nonresponsive", "NP_HOST_NONRESPONSIVE", "10.0.0.1", - "The hostname of system not responsive to network requests" ); - -my $hostname_invalid = getTestParameter( "hostname_invalid", "NP_HOSTNAME_INVALID", "nosuchhost", - "An invalid (not known to DNS) hostname" ); +my $host_udp_time = getTestParameter("NP_HOST_UDP_TIME", "A host providing the UDP Time Service", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); my $successOutput = '/^TIME OK - [0-9]+ second time difference/'; -- cgit v0.10-9-g596f From 0a58acc7052d4962d8fe68aeb6919b59dfdef1cf Mon Sep 17 00:00:00 2001 From: Tomas Mozes Date: Wed, 5 Dec 2018 12:50:53 +0100 Subject: plugins: check_http: Increase regexp limit diff --git a/plugins/check_http.c b/plugins/check_http.c index 856e1e9..a25f1ec 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -72,7 +72,7 @@ int maximum_age = -1; enum { REGS = 2, - MAX_RE_SIZE = 256 + MAX_RE_SIZE = 1024 }; #include "regex.h" regex_t preg; -- cgit v0.10-9-g596f From fd6dc666538dd95f11811817ceb21604676e142c Mon Sep 17 00:00:00 2001 From: Lars Michelsen Date: Tue, 13 Oct 2015 10:26:01 +0200 Subject: check_icmp: Add IPv6 support This commit adds IPv6 capabilities to check_icmp. It is now possible to specify the address family using the arguments -4 (default) or -6. To make the change possible we had to move the argument parsing previous to creating the socket to be able to create it with the correct address family. This commit also fixes some gcc 4.9.2 compiler warnings. It has been tested with several current linux distributions (debian, ubuntu, rh, sles). This commit fixes monitoring-plugins/monitoring-plugins#1291 diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 4098874..6aeedf4 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -67,7 +67,9 @@ const char *email = "devel@monitoring-plugins.org"; #include #include #include +#include #include +#include #include #include #include @@ -113,8 +115,8 @@ typedef struct rta_host { unsigned short id; /* id in **table, and icmp pkts */ char *name; /* arg used for adding this host */ char *msg; /* icmp error message, if any */ - struct sockaddr_in saddr_in; /* the address of this host */ - struct in_addr error_addr; /* stores address of error replies */ + struct sockaddr_storage saddr_in; /* the address of this host */ + struct sockaddr_storage error_addr; /* stores address of error replies */ unsigned long long time_waited; /* total time waited, in usecs */ unsigned int icmp_sent, icmp_recv, icmp_lost; /* counters */ unsigned char icmp_type, icmp_code; /* type and code from errors */ @@ -140,6 +142,18 @@ typedef struct icmp_ping_data { unsigned short ping_id; } icmp_ping_data; +typedef union ip_hdr { + struct ip ip; + struct ip6_hdr ip6; +} ip_hdr; + +typedef union icmp_packet { + void *buf; + struct icmp *icp; + struct icmp6_hdr *icp6; + u_short *cksum_in; +} icmp_packet; + /* the different modes of this program are as follows: * MODE_RTA: send all packets no matter what (mimic check_icmp and check_ping) * MODE_HOSTCHECK: Return immediately upon any sign of life @@ -190,8 +204,9 @@ static int get_threshold(char *str, threshold *th); static void run_checks(void); static void set_source_ip(char *); static int add_target(char *); -static int add_target_ip(char *, struct in_addr *); -static int handle_random_icmp(unsigned char *, struct sockaddr_in *); +static int add_target_ip(char *, struct sockaddr_storage *); +static int handle_random_icmp(unsigned char *, struct sockaddr_storage *); +static void parse_address(struct sockaddr_storage *, char *, int); static unsigned short icmp_checksum(unsigned short *, int); static void finish(int); static void crash(const char *, ...); @@ -300,7 +315,7 @@ get_icmp_error_msg(unsigned char icmp_type, unsigned char icmp_code) } static int -handle_random_icmp(unsigned char *packet, struct sockaddr_in *addr) +handle_random_icmp(unsigned char *packet, struct sockaddr_storage *addr) { struct icmp p, sent_icmp; struct rta_host *host = NULL; @@ -342,9 +357,11 @@ handle_random_icmp(unsigned char *packet, struct sockaddr_in *addr) /* it is indeed a response for us */ host = table[ntohs(sent_icmp.icmp_seq)/packets]; if(debug) { + char address[INET6_ADDRSTRLEN]; + parse_address(addr, address, sizeof(address)); printf("Received \"%s\" from %s for ICMP ECHO sent to %s.\n", - get_icmp_error_msg(p.icmp_type, p.icmp_code), - inet_ntoa(addr->sin_addr), host->name); + get_icmp_error_msg(p.icmp_type, p.icmp_code), + address, host->name); } icmp_lost++; @@ -364,11 +381,23 @@ handle_random_icmp(unsigned char *packet, struct sockaddr_in *addr) } host->icmp_type = p.icmp_type; host->icmp_code = p.icmp_code; - host->error_addr.s_addr = addr->sin_addr.s_addr; + host->error_addr = *addr; return 0; } +void parse_address(struct sockaddr_storage *addr, char *address, int size) +{ + switch (address_family) { + case AF_INET: + inet_ntop(address_family, &((struct sockaddr_in *)addr)->sin_addr, address, size); + break; + case AF_INET6: + inet_ntop(address_family, &((struct sockaddr_in6 *)addr)->sin6_addr, address, size); + break; + } +} + int main(int argc, char **argv) { @@ -390,7 +419,90 @@ main(int argc, char **argv) * that before pointer magic (esp. on network data) */ icmp_sockerrno = udp_sockerrno = tcp_sockerrno = sockets = 0; - if((icmp_sock = socket(PF_INET, SOCK_RAW, IPPROTO_ICMP)) != -1) + address_family = AF_INET; + int icmp_proto = IPPROTO_ICMP; + + /* parse the arguments */ + for(i = 1; i < argc; i++) { + while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { + unsigned short size; + switch(arg) { + case 'v': + debug++; + break; + case 'b': + size = (unsigned short)strtol(optarg,NULL,0); + if (size >= (sizeof(struct icmp) + sizeof(struct icmp_ping_data)) && + size < MAX_PING_DATA) { + icmp_data_size = size; + icmp_pkt_size = size + ICMP_MINLEN; + } else + usage_va("ICMP data length must be between: %d and %d", + sizeof(struct icmp) + sizeof(struct icmp_ping_data), + MAX_PING_DATA - 1); + break; + case 'i': + pkt_interval = get_timevar(optarg); + break; + case 'I': + target_interval = get_timevar(optarg); + break; + case 'w': + get_threshold(optarg, &warn); + break; + case 'c': + get_threshold(optarg, &crit); + break; + case 'n': + case 'p': + packets = strtoul(optarg, NULL, 0); + break; + case 't': + timeout = strtoul(optarg, NULL, 0); + if(!timeout) timeout = 10; + break; + case 'H': + add_target(optarg); + break; + case 'l': + ttl = (unsigned char)strtoul(optarg, NULL, 0); + break; + case 'm': + min_hosts_alive = (int)strtoul(optarg, NULL, 0); + break; + case 'd': /* implement later, for cluster checks */ + warn_down = (unsigned char)strtoul(optarg, &ptr, 0); + if(ptr) { + crit_down = (unsigned char)strtoul(ptr + 1, NULL, 0); + } + break; + case 's': /* specify source IP address */ + set_source_ip(optarg); + break; + case 'V': /* version */ + print_revision (progname, NP_VERSION); + exit (STATE_UNKNOWN); + case 'h': /* help */ + print_help (); + exit (STATE_UNKNOWN); + break; + case '4': + address_family = AF_INET; + icmp_proto = IPPROTO_ICMP; + break; + case '6': +#ifdef USE_IPV6 + address_family = AF_INET6; + icmp_proto = IPPROTO_ICMPV6; +#else + usage (_("IPv6 support not available\n")); +#endif + break; + } + } + } + + if((icmp_sock = socket(address_family, SOCK_RAW, icmp_proto)) != -1) sockets |= HAVE_ICMP; else icmp_sockerrno = errno; @@ -403,7 +515,10 @@ main(int argc, char **argv) /* else tcp_sockerrno = errno; */ /* now drop privileges (no effect if not setsuid or geteuid() == 0) */ - setuid(getuid()); + if (setuid(getuid()) == -1) { + printf("ERROR: Failed to drop privileges\n"); + return 1; + } #ifdef SO_TIMESTAMP if(setsockopt(icmp_sock, SOL_SOCKET, SO_TIMESTAMP, &on, sizeof(on))) @@ -467,73 +582,6 @@ main(int argc, char **argv) strcpy(argv[1], "-V"); } - /* parse the arguments */ - for(i = 1; i < argc; i++) { - while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:")) != EOF) { - unsigned short size; - switch(arg) { - case 'v': - debug++; - break; - case 'b': - size = (unsigned short)strtol(optarg,NULL,0); - if (size >= (sizeof(struct icmp) + sizeof(struct icmp_ping_data)) && - size < MAX_PING_DATA) { - icmp_data_size = size; - icmp_pkt_size = size + ICMP_MINLEN; - } else - usage_va("ICMP data length must be between: %d and %d", - sizeof(struct icmp) + sizeof(struct icmp_ping_data), - MAX_PING_DATA - 1); - break; - case 'i': - pkt_interval = get_timevar(optarg); - break; - case 'I': - target_interval = get_timevar(optarg); - break; - case 'w': - get_threshold(optarg, &warn); - break; - case 'c': - get_threshold(optarg, &crit); - break; - case 'n': - case 'p': - packets = strtoul(optarg, NULL, 0); - break; - case 't': - timeout = strtoul(optarg, NULL, 0); - if(!timeout) timeout = 10; - break; - case 'H': - add_target(optarg); - break; - case 'l': - ttl = (unsigned char)strtoul(optarg, NULL, 0); - break; - case 'm': - min_hosts_alive = (int)strtoul(optarg, NULL, 0); - break; - case 'd': /* implement later, for cluster checks */ - warn_down = (unsigned char)strtoul(optarg, &ptr, 0); - if(ptr) { - crit_down = (unsigned char)strtoul(ptr + 1, NULL, 0); - } - break; - case 's': /* specify source IP address */ - set_source_ip(optarg); - break; - case 'V': /* version */ - print_revision (progname, NP_VERSION); - exit (STATE_UNKNOWN); - case 'h': /* help */ - print_help (); - exit (STATE_UNKNOWN); - } - } - } - argv = &argv[optind]; while(*argv) { add_target(*argv); @@ -633,7 +681,7 @@ main(int argc, char **argv) } host = list; - table = malloc(sizeof(struct rta_host **) * targets); + table = (struct rta_host**)malloc(sizeof(struct rta_host **) * targets); i = 0; while(host) { host->id = i*packets; @@ -697,9 +745,15 @@ run_checks() } } + /* response structure: + * IPv4: * ip header : 20 bytes * icmp header : 28 bytes + * IPv6: + * ip header : 40 bytes + * icmp header : 28 bytes + * both: * icmp echo reply : the rest */ static int @@ -707,16 +761,27 @@ wait_for_reply(int sock, u_int t) { int n, hlen; static unsigned char buf[4096]; - struct sockaddr_in resp_addr; - struct ip *ip; - struct icmp icp; + struct sockaddr_storage resp_addr; + union ip_hdr *ip; + union icmp_packet packet; struct rta_host *host; struct icmp_ping_data data; struct timeval wait_start, now; u_int tdiff, i, per_pkt_wait; + if (!(packet.buf = malloc(icmp_pkt_size))) { + crash("send_icmp_ping(): failed to malloc %d bytes for send buffer", + icmp_pkt_size); + return -1; /* might be reached if we're in debug mode */ + } + + memset(packet.buf, 0, icmp_pkt_size); + /* if we can't listen or don't have anything to listen to, just return */ - if(!t || !icmp_pkts_en_route) return 0; + if(!t || !icmp_pkts_en_route) { + free(packet.buf); + return 0; + } gettimeofday(&wait_start, &tz); @@ -735,7 +800,7 @@ wait_for_reply(int sock, u_int t) /* reap responses until we hit a timeout */ n = recvfrom_wto(sock, buf, sizeof(buf), - (struct sockaddr *)&resp_addr, &t, &now); + (struct sockaddr *)&resp_addr, &t, &now); if(!n) { if(debug > 1) { printf("recvfrom_wto() timed out during a %u usecs wait\n", @@ -745,12 +810,23 @@ wait_for_reply(int sock, u_int t) } if(n < 0) { if(debug) printf("recvfrom_wto() returned errors\n"); + free(packet.buf); return n; } - ip = (struct ip *)buf; - if(debug > 1) printf("received %u bytes from %s\n", - ntohs(ip->ip_len), inet_ntoa(resp_addr.sin_addr)); + // FIXME: with ipv6 we don't have an ip header here + if (address_family != AF_INET6) { + ip = (union ip_hdr *)buf; + + if(debug > 1) { + char address[INET6_ADDRSTRLEN]; + parse_address(&resp_addr, address, sizeof(address)); + printf("received %u bytes from %s\n", + address_family == AF_INET6 ? ntohs(ip->ip6.ip6_plen) + : ntohs(ip->ip.ip_len), + address); + } + } /* obsolete. alpha on tru64 provides the necessary defines, but isn't broken */ /* #if defined( __alpha__ ) && __STDC__ && !defined( __GLIBC__ ) */ @@ -759,12 +835,14 @@ wait_for_reply(int sock, u_int t) * off the bottom 4 bits */ /* hlen = (ip->ip_vhl & 0x0f) << 2; */ /* #else */ - hlen = ip->ip_hl << 2; + hlen = (address_family == AF_INET6) ? 0 : ip->ip.ip_hl << 2; /* #endif */ if(n < (hlen + ICMP_MINLEN)) { + char address[INET6_ADDRSTRLEN]; + parse_address(&resp_addr, address, sizeof(address)); crash("received packet too short for ICMP (%d bytes, expected %d) from %s\n", - n, hlen + icmp_pkt_size, inet_ntoa(resp_addr.sin_addr)); + n, hlen + icmp_pkt_size, address); } /* else if(debug) { */ /* printf("ip header size: %u, packet size: %u (expected %u, %u)\n", */ @@ -773,23 +851,39 @@ wait_for_reply(int sock, u_int t) /* } */ /* check the response */ - memcpy(&icp, buf + hlen, sizeof(icp)); - if(ntohs(icp.icmp_id) != pid || icp.icmp_type != ICMP_ECHOREPLY || - ntohs(icp.icmp_seq) >= targets*packets) { + memcpy(packet.buf, buf + hlen, icmp_pkt_size); +/* address_family == AF_INET6 ? sizeof(struct icmp6_hdr) + : sizeof(struct icmp));*/ + + if( (address_family == PF_INET && + (ntohs(packet.icp->icmp_id) != pid || packet.icp->icmp_type != ICMP_ECHOREPLY + || ntohs(packet.icp->icmp_seq) >= targets * packets)) + || (address_family == PF_INET6 && + (ntohs(packet.icp6->icmp6_id) != pid || packet.icp6->icmp6_type != ICMP6_ECHO_REPLY + || ntohs(packet.icp6->icmp6_seq) >= targets * packets))) { if(debug > 2) printf("not a proper ICMP_ECHOREPLY\n"); handle_random_icmp(buf + hlen, &resp_addr); continue; } /* this is indeed a valid response */ - memcpy(&data, icp.icmp_data, sizeof(data)); - if (debug > 2) - printf("ICMP echo-reply of len %lu, id %u, seq %u, cksum 0x%X\n", - (unsigned long)sizeof(data), ntohs(icp.icmp_id), - ntohs(icp.icmp_seq), icp.icmp_cksum); + if (address_family == PF_INET) { + memcpy(&data, packet.icp->icmp_data, sizeof(data)); + if (debug > 2) + printf("ICMP echo-reply of len %lu, id %u, seq %u, cksum 0x%X\n", + (unsigned long)sizeof(data), ntohs(packet.icp->icmp_id), + ntohs(packet.icp->icmp_seq), packet.icp->icmp_cksum); + host = table[ntohs(packet.icp->icmp_seq)/packets]; + } else { + memcpy(&data, &packet.icp6->icmp6_dataun.icmp6_un_data8[4], sizeof(data)); + if (debug > 2) + printf("ICMP echo-reply of len %lu, id %u, seq %u, cksum 0x%X\n", + (unsigned long)sizeof(data), ntohs(packet.icp6->icmp6_id), + ntohs(packet.icp6->icmp6_seq), packet.icp6->icmp6_cksum); + host = table[ntohs(packet.icp6->icmp6_seq)/packets]; + } - host = table[ntohs(icp.icmp_seq)/packets]; tdiff = get_timevaldiff(&data.stime, &now); host->time_waited += tdiff; @@ -801,22 +895,25 @@ wait_for_reply(int sock, u_int t) host->rtmin = tdiff; if(debug) { + char address[INET6_ADDRSTRLEN]; + parse_address(&resp_addr, address, sizeof(address)); printf("%0.3f ms rtt from %s, outgoing ttl: %u, incoming ttl: %u, max: %0.3f, min: %0.3f\n", - (float)tdiff / 1000, inet_ntoa(resp_addr.sin_addr), - ttl, ip->ip_ttl, (float)host->rtmax / 1000, (float)host->rtmin / 1000); + (float)tdiff / 1000, address, + ttl, ip->ip.ip_ttl, (float)host->rtmax / 1000, (float)host->rtmin / 1000); } /* if we're in hostcheck mode, exit with limited printouts */ if(mode == MODE_HOSTCHECK) { printf("OK - %s responds to ICMP. Packet %u, rta %0.3fms|" - "pkt=%u;;0;%u rta=%0.3f;%0.3f;%0.3f;;\n", - host->name, icmp_recv, (float)tdiff / 1000, - icmp_recv, packets, (float)tdiff / 1000, - (float)warn.rta / 1000, (float)crit.rta / 1000); + "pkt=%u;;0;%u rta=%0.3f;%0.3f;%0.3f;;\n", + host->name, icmp_recv, (float)tdiff / 1000, + icmp_recv, packets, (float)tdiff / 1000, + (float)warn.rta / 1000, (float)crit.rta / 1000); exit(STATE_OK); } } + free(packet.buf); return 0; } @@ -824,62 +921,81 @@ wait_for_reply(int sock, u_int t) static int send_icmp_ping(int sock, struct rta_host *host) { - static union { - void *buf; /* re-use so we prevent leaks */ - struct icmp *icp; - u_short *cksum_in; - } packet = { NULL }; long int len; struct icmp_ping_data data; struct msghdr hdr; struct iovec iov; struct timeval tv; - struct sockaddr *addr; + void *buf = NULL; if(sock == -1) { errno = 0; crash("Attempt to send on bogus socket"); return -1; } - addr = (struct sockaddr *)&host->saddr_in; - if(!packet.buf) { - if (!(packet.buf = malloc(icmp_pkt_size))) { + if(!buf) { + if (!(buf = malloc(icmp_pkt_size))) { crash("send_icmp_ping(): failed to malloc %d bytes for send buffer", icmp_pkt_size); return -1; /* might be reached if we're in debug mode */ } } - memset(packet.buf, 0, icmp_pkt_size); + memset(buf, 0, icmp_pkt_size); - if((gettimeofday(&tv, &tz)) == -1) return -1; + if((gettimeofday(&tv, &tz)) == -1) { + free(buf); + return -1; + } data.ping_id = 10; /* host->icmp.icmp_sent; */ memcpy(&data.stime, &tv, sizeof(tv)); - memcpy(&packet.icp->icmp_data, &data, sizeof(data)); - packet.icp->icmp_type = ICMP_ECHO; - packet.icp->icmp_code = 0; - packet.icp->icmp_cksum = 0; - packet.icp->icmp_id = htons(pid); - packet.icp->icmp_seq = htons(host->id++); - packet.icp->icmp_cksum = icmp_checksum(packet.cksum_in, icmp_pkt_size); - - if (debug > 2) - printf("Sending ICMP echo-request of len %lu, id %u, seq %u, cksum 0x%X to host %s\n", - (unsigned long)sizeof(data), ntohs(packet.icp->icmp_id), - ntohs(packet.icp->icmp_seq), packet.icp->icmp_cksum, - host->name); + + if (address_family == AF_INET) { + struct icmp *icp = (struct icmp*)buf; + + memcpy(&icp->icmp_data, &data, sizeof(data)); + + icp->icmp_type = ICMP_ECHO; + icp->icmp_code = 0; + icp->icmp_cksum = 0; + icp->icmp_id = htons(pid); + icp->icmp_seq = htons(host->id++); + icp->icmp_cksum = icmp_checksum((unsigned short*)buf, icmp_pkt_size); + + if (debug > 2) + printf("Sending ICMP echo-request of len %lu, id %u, seq %u, cksum 0x%X to host %s\n", + (unsigned long)sizeof(data), ntohs(icp->icmp_id), ntohs(icp->icmp_seq), icp->icmp_cksum, host->name); + } + else { + struct icmp6_hdr *icp6 = (struct icmp6_hdr*)buf; + memcpy(&icp6->icmp6_dataun.icmp6_un_data8[4], &data, sizeof(data)); + icp6->icmp6_type = ICMP6_ECHO_REQUEST; + icp6->icmp6_code = 0; + icp6->icmp6_cksum = 0; + icp6->icmp6_id = htons(pid); + icp6->icmp6_seq = htons(host->id++); + // let checksum be calculated automatically + + if (debug > 2) { + printf("Sending ICMP echo-request of len %lu, id %u, seq %u, cksum 0x%X to host %s\n", + (unsigned long)sizeof(data), ntohs(icp6->icmp6_id), + ntohs(icp6->icmp6_seq), icp6->icmp6_cksum, host->name); + } + } memset(&iov, 0, sizeof(iov)); - iov.iov_base = packet.buf; + iov.iov_base = buf; iov.iov_len = icmp_pkt_size; memset(&hdr, 0, sizeof(hdr)); - hdr.msg_name = addr; - hdr.msg_namelen = sizeof(struct sockaddr); + hdr.msg_name = (struct sockaddr *)&host->saddr_in; + hdr.msg_namelen = sizeof(struct sockaddr_storage); hdr.msg_iov = &iov; hdr.msg_iovlen = 1; + errno = 0; + /* MSG_CONFIRM is a linux thing and only available on linux kernels >= 2.3.15, see send(2) */ #ifdef MSG_CONFIRM len = sendmsg(sock, &hdr, MSG_CONFIRM); @@ -887,9 +1003,15 @@ send_icmp_ping(int sock, struct rta_host *host) len = sendmsg(sock, &hdr, 0); #endif + free(buf); + if(len < 0 || (unsigned int)len != icmp_pkt_size) { - if(debug) printf("Failed to send ping to %s\n", - inet_ntoa(host->saddr_in.sin_addr)); + if(debug) { + char address[INET6_ADDRSTRLEN]; + parse_address((struct sockaddr_storage *)&host->saddr_in, address, sizeof(address)); + printf("Failed to send ping to %s: %s\n", address, strerror(errno)); + } + errno = 0; return -1; } @@ -934,7 +1056,7 @@ recvfrom_wto(int sock, void *buf, unsigned int len, struct sockaddr *saddr, if(!n) return 0; /* timeout */ - slen = sizeof(struct sockaddr); + slen = sizeof(struct sockaddr_storage); memset(&iov, 0, sizeof(iov)); iov.iov_base = buf; @@ -958,6 +1080,7 @@ recvfrom_wto(int sock, void *buf, unsigned int len, struct sockaddr *saddr, break ; } } + if (!chdr) #endif // SO_TIMESTAMP gettimeofday(tv, &tz); @@ -991,6 +1114,7 @@ finish(int sig) /* iterate thrice to calculate values, give output, and print perfparse */ host = list; + while(host) { if(!host->icmp_recv) { /* rta 0 is ofcourse not entirely correct, but will still show up @@ -1039,10 +1163,12 @@ finish(int sig) if(!host->icmp_recv) { status = STATE_CRITICAL; if(host->flags & FLAG_LOST_CAUSE) { + char address[INET6_ADDRSTRLEN]; + parse_address(&host->error_addr, address, sizeof(address)); printf("%s: %s @ %s. rta nan, lost %d%%", host->name, get_icmp_error_msg(host->icmp_type, host->icmp_code), - inet_ntoa(host->error_addr), + address, 100); } else { /* not marked as lost cause, so we have no flags for it */ @@ -1104,7 +1230,6 @@ get_timevaldiff(struct timeval *early, struct timeval *later) { return 0; } - ret = (later->tv_sec - early->tv_sec) * 1000000; ret += later->tv_usec - early->tv_usec; @@ -1112,18 +1237,35 @@ get_timevaldiff(struct timeval *early, struct timeval *later) } static int -add_target_ip(char *arg, struct in_addr *in) +add_target_ip(char *arg, struct sockaddr_storage *in) { struct rta_host *host; + struct sockaddr_in *sin, *host_sin; + struct sockaddr_in6 *sin6, *host_sin6; - /* disregard obviously stupid addresses */ - if(in->s_addr == INADDR_NONE || in->s_addr == INADDR_ANY) + if (address_family == AF_INET) + sin = (struct sockaddr_in *)in; + else + sin6 = (struct sockaddr_in6 *)in; + + + + /* disregard obviously stupid addresses + * (I didn't find an ipv6 equivalent to INADDR_NONE) */ + if (((address_family == AF_INET && (sin->sin_addr.s_addr == INADDR_NONE + || sin->sin_addr.s_addr == INADDR_ANY))) + || (address_family == AF_INET6 && (sin6->sin6_addr.s6_addr == in6addr_any.s6_addr))) { return -1; + } /* no point in adding two identical IP's, so don't. ;) */ host = list; while(host) { - if(host->saddr_in.sin_addr.s_addr == in->s_addr) { + host_sin = (struct sockaddr_in *)&host->saddr_in; + host_sin6 = (struct sockaddr_in6 *)&host->saddr_in; + + if( (address_family == AF_INET && host_sin->sin_addr.s_addr == sin->sin_addr.s_addr) + || (address_family == AF_INET6 && host_sin6->sin6_addr.s6_addr == sin6->sin6_addr.s6_addr)) { if(debug) printf("Identical IP already exists. Not adding %s\n", arg); return -1; } @@ -1131,19 +1273,29 @@ add_target_ip(char *arg, struct in_addr *in) } /* add the fresh ip */ - host = malloc(sizeof(struct rta_host)); + host = (struct rta_host*)malloc(sizeof(struct rta_host)); if(!host) { + char straddr[INET6_ADDRSTRLEN]; + parse_address((struct sockaddr_storage*)&in, straddr, sizeof(straddr)); crash("add_target_ip(%s, %s): malloc(%d) failed", - arg, inet_ntoa(*in), sizeof(struct rta_host)); + arg, straddr, sizeof(struct rta_host)); } memset(host, 0, sizeof(struct rta_host)); /* set the values. use calling name for output */ host->name = strdup(arg); - /* fill out the sockaddr_in struct */ - host->saddr_in.sin_family = AF_INET; - host->saddr_in.sin_addr.s_addr = in->s_addr; + /* fill out the sockaddr_storage struct */ + if(address_family == AF_INET) { + host_sin = (struct sockaddr_in *)&host->saddr_in; + host_sin->sin_family = AF_INET; + host_sin->sin_addr.s_addr = sin->sin_addr.s_addr; + } + else { + host_sin6 = (struct sockaddr_in6 *)&host->saddr_in; + host_sin6->sin6_family = AF_INET6; + memcpy(host_sin6->sin6_addr.s6_addr, sin6->sin6_addr.s6_addr, sizeof host_sin6->sin6_addr.s6_addr); + } host->rtmin = DBL_MAX; @@ -1160,31 +1312,45 @@ add_target_ip(char *arg, struct in_addr *in) static int add_target(char *arg) { - int i; - struct hostent *he; - struct in_addr *in, ip; + int error, result; + struct sockaddr_storage ip; + struct addrinfo hints, *res, *p; + struct sockaddr_in *sin; + struct sockaddr_in6 *sin6; + + switch (address_family) { + case AF_INET: + sin = (struct sockaddr_in *)&ip; + result = inet_pton(address_family, arg, &sin->sin_addr); + break; + case AF_INET6: + sin6 = (struct sockaddr_in6 *)&ip; + result = inet_pton(address_family, arg, &sin6->sin6_addr); + break; + default: crash("Address family not supported"); + } /* don't resolve if we don't have to */ - if((ip.s_addr = inet_addr(arg)) != INADDR_NONE) { + if(result == 1) { /* don't add all ip's if we were given a specific one */ return add_target_ip(arg, &ip); - /* he = gethostbyaddr((char *)in, sizeof(struct in_addr), AF_INET); */ - /* if(!he) return add_target_ip(arg, in); */ } else { errno = 0; - he = gethostbyname(arg); - if(!he) { + memset(&hints, 0, sizeof(hints)); + hints.ai_family = address_family == AF_INET ? PF_INET : PF_INET6; + hints.ai_socktype = SOCK_RAW; + if((error = getaddrinfo(arg, NULL, &hints, &res)) != 0) { errno = 0; - crash("Failed to resolve %s", arg); + crash("Failed to resolve %s: %s", arg, gai_strerror(error)); return -1; } } /* possibly add all the IP's as targets */ - for(i = 0; he->h_addr_list[i]; i++) { - in = (struct in_addr *)he->h_addr_list[i]; - add_target_ip(arg, in); + for(p = res; p != NULL; p = p->ai_next) { + memcpy(&ip, p->ai_addr, p->ai_addrlen); + add_target_ip(arg, &ip); /* this is silly, but it works */ if(mode == MODE_HOSTCHECK || mode == MODE_ALL) { @@ -1193,6 +1359,7 @@ add_target(char *arg) } break; } + freeaddrinfo(res); return 0; } @@ -1203,7 +1370,7 @@ set_source_ip(char *arg) struct sockaddr_in src; memset(&src, 0, sizeof(src)); - src.sin_family = AF_INET; + src.sin_family = address_family; if((src.sin_addr.s_addr = inet_addr(arg)) == INADDR_NONE) src.sin_addr.s_addr = get_ip_address(arg); if(bind(icmp_sock, (struct sockaddr *)&src, sizeof(src)) == -1) @@ -1311,12 +1478,12 @@ get_threshold(char *str, threshold *th) unsigned short icmp_checksum(unsigned short *p, int n) { - register unsigned short cksum; - register long sum = 0; + unsigned short cksum; + long sum = 0; - while(n > 1) { + while(n > 2) { sum += *p++; - n -= 2; + n -= sizeof(unsigned short); } /* mop up the occasional odd byte */ @@ -1347,6 +1514,8 @@ print_help(void) printf (" %s\n", "-H"); printf (" %s\n", _("specify a target")); + printf (" %s\n", "[-4|-6]"); + printf (" %s\n", _("Use IPv4 (default) or IPv6 to communicate with the targets")); printf (" %s\n", "-w"); printf (" %s", _("warning threshold (currently ")); printf ("%0.3fms,%u%%)\n", (float)warn.rta / 1000, warn.pl); -- cgit v0.10-9-g596f From 248bebb037b4ac3a184706ec715f82a6ed4749a5 Mon Sep 17 00:00:00 2001 From: Lars Michelsen Date: Thu, 22 Oct 2015 16:40:02 +0200 Subject: Fixed parameter handling after 01efbb2183d49c5082598d4799788fc385342f28 diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 6aeedf4..4c17d23 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -422,6 +422,44 @@ main(int argc, char **argv) address_family = AF_INET; int icmp_proto = IPPROTO_ICMP; + /* get calling name the old-fashioned way for portability instead + * of relying on the glibc-ism __progname */ + ptr = strrchr(argv[0], '/'); + if(ptr) progname = &ptr[1]; + else progname = argv[0]; + + /* now set defaults. Use progname to set them initially (allows for + * superfast check_host program when target host is up */ + cursor = list = NULL; + table = NULL; + + mode = MODE_RTA; + crit.rta = 500000; + crit.pl = 80; + warn.rta = 200000; + warn.pl = 40; + protocols = HAVE_ICMP | HAVE_UDP | HAVE_TCP; + pkt_interval = 80000; /* 80 msec packet interval by default */ + packets = 5; + + if(!strcmp(progname, "check_icmp") || !strcmp(progname, "check_ping")) { + mode = MODE_ICMP; + protocols = HAVE_ICMP; + } + else if(!strcmp(progname, "check_host")) { + mode = MODE_HOSTCHECK; + pkt_interval = 1000000; + packets = 5; + crit.rta = warn.rta = 1000000; + crit.pl = warn.pl = 100; + } + else if(!strcmp(progname, "check_rta_multi")) { + mode = MODE_ALL; + target_interval = 0; + pkt_interval = 50000; + packets = 5; + } + /* parse the arguments */ for(i = 1; i < argc; i++) { while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { @@ -533,44 +571,6 @@ main(int argc, char **argv) pid = getpid() & 0xffff; /* printf("pid = %u\n", pid); */ - /* get calling name the old-fashioned way for portability instead - * of relying on the glibc-ism __progname */ - ptr = strrchr(argv[0], '/'); - if(ptr) progname = &ptr[1]; - else progname = argv[0]; - - /* now set defaults. Use progname to set them initially (allows for - * superfast check_host program when target host is up */ - cursor = list = NULL; - table = NULL; - - mode = MODE_RTA; - crit.rta = 500000; - crit.pl = 80; - warn.rta = 200000; - warn.pl = 40; - protocols = HAVE_ICMP | HAVE_UDP | HAVE_TCP; - pkt_interval = 80000; /* 80 msec packet interval by default */ - packets = 5; - - if(!strcmp(progname, "check_icmp") || !strcmp(progname, "check_ping")) { - mode = MODE_ICMP; - protocols = HAVE_ICMP; - } - else if(!strcmp(progname, "check_host")) { - mode = MODE_HOSTCHECK; - pkt_interval = 1000000; - packets = 5; - crit.rta = warn.rta = 1000000; - crit.pl = warn.pl = 100; - } - else if(!strcmp(progname, "check_rta_multi")) { - mode = MODE_ALL; - target_interval = 0; - pkt_interval = 50000; - packets = 5; - } - /* Parse extra opts if any */ argv=np_extra_opts(&argc, argv, progname); -- cgit v0.10-9-g596f From 8edac9421f8ce28ab51917de4e056ac609eadd49 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Thu, 29 Nov 2018 16:02:10 +0100 Subject: check_icmp: Automatically detect IP protocol This patch automatically detects whether the protocol version is IPv4 or IPv6 All credits to: https://github.com/ghciv6 Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 4c17d23..cab69fd 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -419,7 +419,7 @@ main(int argc, char **argv) * that before pointer magic (esp. on network data) */ icmp_sockerrno = udp_sockerrno = tcp_sockerrno = sockets = 0; - address_family = AF_INET; + address_family = -1; int icmp_proto = IPPROTO_ICMP; /* get calling name the old-fashioned way for portability instead @@ -526,12 +526,10 @@ main(int argc, char **argv) break; case '4': address_family = AF_INET; - icmp_proto = IPPROTO_ICMP; break; case '6': #ifdef USE_IPV6 address_family = AF_INET6; - icmp_proto = IPPROTO_ICMPV6; #else usage (_("IPv6 support not available\n")); #endif @@ -540,29 +538,6 @@ main(int argc, char **argv) } } - if((icmp_sock = socket(address_family, SOCK_RAW, icmp_proto)) != -1) - sockets |= HAVE_ICMP; - else icmp_sockerrno = errno; - - /* if((udp_sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP)) != -1) */ - /* sockets |= HAVE_UDP; */ - /* else udp_sockerrno = errno; */ - - /* if((tcp_sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP)) != -1) */ - /* sockets |= HAVE_TCP; */ - /* else tcp_sockerrno = errno; */ - - /* now drop privileges (no effect if not setsuid or geteuid() == 0) */ - if (setuid(getuid()) == -1) { - printf("ERROR: Failed to drop privileges\n"); - return 1; - } - -#ifdef SO_TIMESTAMP - if(setsockopt(icmp_sock, SOL_SOCKET, SO_TIMESTAMP, &on, sizeof(on))) - if(debug) printf("Warning: no SO_TIMESTAMP support\n"); -#endif // SO_TIMESTAMP - /* POSIXLY_CORRECT might break things, so unset it (the portable way) */ environ = NULL; @@ -593,6 +568,37 @@ main(int argc, char **argv) exit(3); } + // add_target might change address_family + switch ( address_family ){ + case AF_INET: icmp_proto = IPPROTO_ICMP; + break; + case AF_INET6: icmp_proto = IPPROTO_ICMPV6; + break; + default: crash("Address family not supported"); + } + if((icmp_sock = socket(address_family, SOCK_RAW, icmp_proto)) != -1) + sockets |= HAVE_ICMP; + else icmp_sockerrno = errno; + + /* if((udp_sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP)) != -1) */ + /* sockets |= HAVE_UDP; */ + /* else udp_sockerrno = errno; */ + + /* if((tcp_sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP)) != -1) */ + /* sockets |= HAVE_TCP; */ + /* else tcp_sockerrno = errno; */ + +#ifdef SO_TIMESTAMP + if(setsockopt(icmp_sock, SOL_SOCKET, SO_TIMESTAMP, &on, sizeof(on))) + if(debug) printf("Warning: no SO_TIMESTAMP support\n"); +#endif // SO_TIMESTAMP + + /* now drop privileges (no effect if not setsuid or geteuid() == 0) */ + if (setuid(getuid()) == -1) { + printf("ERROR: Failed to drop privileges\n"); + return 1; + } + if(!sockets) { if(icmp_sock == -1) { errno = icmp_sockerrno; @@ -1319,6 +1325,19 @@ add_target(char *arg) struct sockaddr_in6 *sin6; switch (address_family) { + case -1: + // -4 and -6 are not specified on cmdline + address_family = AF_INET; + sin = (struct sockaddr_in *)&ip; + result = inet_pton(address_family, arg, &sin->sin_addr); +#ifdef USE_IPV6 + if( result != 1 ){ + address_family = AF_INET6; + sin6 = (struct sockaddr_in6 *)&ip; + result = inet_pton(address_family, arg, &sin6->sin6_addr); + } +#endif + break; case AF_INET: sin = (struct sockaddr_in *)&ip; result = inet_pton(address_family, arg, &sin->sin_addr); -- cgit v0.10-9-g596f From e3ade3374a99155c8c70d89a8d8116240d5c8df0 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Mon, 3 Dec 2018 14:19:27 +0000 Subject: check_icmp: process protocol version args first Detection of protocol version is in the previous patch implemented in the add_target() function, which is called when adding the -H command line argument. That means that if a protocal version argument (-4, -6) is added after the -H then the protocol version might be incorrectly set. This patch ensures that we first process the protocol version arguments, and then we process the rest of the arguments. Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index cab69fd..b978ee1 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -460,6 +460,28 @@ main(int argc, char **argv) packets = 5; } + /* Parse protocol arguments first */ + for(i = 1; i < argc; i++) { + while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { + unsigned short size; + switch(arg) { + case '4': + address_family = AF_INET; + break; + case '6': +#ifdef USE_IPV6 + address_family = AF_INET6; +#else + usage (_("IPv6 support not available\n")); +#endif + break; + } + } + } + + /* Reset argument scanning */ + optind = 1; + /* parse the arguments */ for(i = 1; i < argc; i++) { while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { @@ -524,16 +546,6 @@ main(int argc, char **argv) print_help (); exit (STATE_UNKNOWN); break; - case '4': - address_family = AF_INET; - break; - case '6': -#ifdef USE_IPV6 - address_family = AF_INET6; -#else - usage (_("IPv6 support not available\n")); -#endif - break; } } } -- cgit v0.10-9-g596f From e5eccb663efb40c010ed608f5900b341592cfa68 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Mon, 3 Dec 2018 14:23:58 +0000 Subject: check_icmp: removed outcommented code Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index b978ee1..749e2d4 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -592,13 +592,6 @@ main(int argc, char **argv) sockets |= HAVE_ICMP; else icmp_sockerrno = errno; - /* if((udp_sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP)) != -1) */ - /* sockets |= HAVE_UDP; */ - /* else udp_sockerrno = errno; */ - - /* if((tcp_sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP)) != -1) */ - /* sockets |= HAVE_TCP; */ - /* else tcp_sockerrno = errno; */ #ifdef SO_TIMESTAMP if(setsockopt(icmp_sock, SOL_SOCKET, SO_TIMESTAMP, &on, sizeof(on))) -- cgit v0.10-9-g596f From 0882b4201bfa0608b90448c4866b571a20e1fd66 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Thu, 6 Dec 2018 15:33:34 +0000 Subject: check_icmp: Correctly set address_family on lookup If a hostname is supplied instead of an IP address, the automatic address family detection would fail to correctly set the IP protocol version (it would always be IPv6). We now supply AF_UNSPEC to getaddrinfo, which should then return the correct address family in the result. Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 749e2d4..1a2a177 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -1362,13 +1362,14 @@ add_target(char *arg) else { errno = 0; memset(&hints, 0, sizeof(hints)); - hints.ai_family = address_family == AF_INET ? PF_INET : PF_INET6; + hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_RAW; if((error = getaddrinfo(arg, NULL, &hints, &res)) != 0) { errno = 0; crash("Failed to resolve %s: %s", arg, gai_strerror(error)); return -1; } + address_family = res->ai_family; } /* possibly add all the IP's as targets */ -- cgit v0.10-9-g596f From 270e7cba3830328424e3f2b6b9a6989b1ea5f89b Mon Sep 17 00:00:00 2001 From: Vincent Danjean Date: Sat, 8 Dec 2018 21:51:05 +0100 Subject: [check_disk] add support to display inodes usage in perfdata This is not enabled by default It can be enabled with the -P (--iperfdata) option diff --git a/gl/fsusage.c b/gl/fsusage.c index 0657555..6103ecf 100644 --- a/gl/fsusage.c +++ b/gl/fsusage.c @@ -143,6 +143,7 @@ get_fs_usage (char const *file, char const *disk, struct fs_usage *fsp) fsp->fsu_bavail_top_bit_set = EXTRACT_TOP_BIT (vfsd.f_bavail) != 0; fsp->fsu_files = PROPAGATE_ALL_ONES (vfsd.f_files); fsp->fsu_ffree = PROPAGATE_ALL_ONES (vfsd.f_ffree); + fsp->fsu_favail = PROPAGATE_ALL_ONES (vfsd.f_favail); return 0; } @@ -174,6 +175,7 @@ get_fs_usage (char const *file, char const *disk, struct fs_usage *fsp) fsp->fsu_bavail_top_bit_set = EXTRACT_TOP_BIT (fsd.fd_req.bfreen) != 0; fsp->fsu_files = PROPAGATE_ALL_ONES (fsd.fd_req.gtot); fsp->fsu_ffree = PROPAGATE_ALL_ONES (fsd.fd_req.gfree); + fsp->fsu_favail = PROPAGATE_ALL_ONES (fsd.fd_req.gfree); #elif defined STAT_READ_FILSYS /* SVR2 */ # ifndef SUPERBOFF @@ -209,6 +211,7 @@ get_fs_usage (char const *file, char const *disk, struct fs_usage *fsp) ? UINTMAX_MAX : (fsd.s_isize - 2) * INOPB * (fsd.s_type == Fs2b ? 2 : 1)); fsp->fsu_ffree = PROPAGATE_ALL_ONES (fsd.s_tinode); + fsp->fsu_favail = PROPAGATE_ALL_ONES (fsd.s_tinode); #elif defined STAT_STATFS3_OSF1 /* OSF/1 */ @@ -296,6 +299,7 @@ get_fs_usage (char const *file, char const *disk, struct fs_usage *fsp) fsp->fsu_bavail_top_bit_set = EXTRACT_TOP_BIT (fsd.f_bavail) != 0; fsp->fsu_files = PROPAGATE_ALL_ONES (fsd.f_files); fsp->fsu_ffree = PROPAGATE_ALL_ONES (fsd.f_ffree); + fsp->fsu_favail = PROPAGATE_ALL_ONES (fsd.f_ffree); #endif @@ -323,6 +327,7 @@ statfs (char *file, struct statfs *fsb) fsb->f_bavail = fsd.du_tfree; fsb->f_files = (fsd.du_isize - 2) * fsd.du_inopb; fsb->f_ffree = fsd.du_tinode; + fsb->f_favail = fsd.du_tinode; fsb->f_fsid.val[0] = fsd.du_site; fsb->f_fsid.val[1] = fsd.du_pckno; return 0; diff --git a/gl/fsusage.h b/gl/fsusage.h index 7810fc0..e2654fd 100644 --- a/gl/fsusage.h +++ b/gl/fsusage.h @@ -32,7 +32,8 @@ struct fs_usage uintmax_t fsu_bavail; /* Free blocks available to non-superuser. */ bool fsu_bavail_top_bit_set; /* 1 if fsu_bavail represents a value < 0. */ uintmax_t fsu_files; /* Total file nodes. */ - uintmax_t fsu_ffree; /* Free file nodes. */ + uintmax_t fsu_ffree; /* Free file nodes to superuser. */ + uintmax_t fsu_favail; /* Free file nodes to non-superuser. */ }; int get_fs_usage (char const *file, char const *disk, struct fs_usage *fsp); diff --git a/lib/utils_disk.c b/lib/utils_disk.c index efe35fc..c7c9126 100644 --- a/lib/utils_disk.c +++ b/lib/utils_disk.c @@ -69,6 +69,8 @@ np_add_parameter(struct parameter_list **list, const char *name) new_path->dtotal_units = 0; new_path->inodes_total = 0; new_path->inodes_free = 0; + new_path->inodes_free_to_root = 0; + new_path->inodes_used = 0; new_path->dused_inodes_percent = 0; new_path->dfree_inodes_percent = 0; diff --git a/lib/utils_disk.h b/lib/utils_disk.h index 83a3763..999270c 100644 --- a/lib/utils_disk.h +++ b/lib/utils_disk.h @@ -24,7 +24,8 @@ struct parameter_list char *group; struct mount_entry *best_match; struct parameter_list *name_next; - uintmax_t total, available, available_to_root, used, inodes_free, inodes_total; + uintmax_t total, available, available_to_root, used, + inodes_free, inodes_free_to_root, inodes_used, inodes_total; double dfree_pct, dused_pct; double dused_units, dfree_units, dtotal_units; double dused_inodes_percent, dfree_inodes_percent; diff --git a/plugins/check_disk.c b/plugins/check_disk.c index e73a008..1c43e85 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -141,6 +141,7 @@ int erronly = FALSE; int display_mntp = FALSE; int exact_match = FALSE; int freespace_ignore_reserved = FALSE; +int display_inodes_perfdata = FALSE; char *warn_freespace_units = NULL; char *crit_freespace_units = NULL; char *warn_freespace_percent = NULL; @@ -167,6 +168,7 @@ main (int argc, char **argv) char *output; char *details; char *perf; + char *perf_ilabel; char *preamble; char *flag_header; double inode_space_pct; @@ -186,6 +188,7 @@ main (int argc, char **argv) output = strdup (""); details = strdup (""); perf = strdup (""); + perf_ilabel = strdup (""); stat_buf = malloc(sizeof *stat_buf); setlocale (LC_ALL, ""); @@ -348,6 +351,29 @@ main (int argc, char **argv) TRUE, 0, TRUE, path->dtotal_units)); + if (display_inodes_perfdata) { + /* *_high_tide must be reinitialized at each run */ + warning_high_tide = UINT_MAX; + critical_high_tide = UINT_MAX; + + if (path->freeinodes_percent->warning != NULL) { + warning_high_tide = abs( min( (double) warning_high_tide, (double) (1.0 - path->freeinodes_percent->warning->end/100)*path->inodes_total )); + } + if (path->freeinodes_percent->critical != NULL) { + critical_high_tide = abs( min( (double) critical_high_tide, (double) (1.0 - path->freeinodes_percent->critical->end/100)*path->inodes_total )); + } + + xasprintf (&perf_ilabel, "%s (inodes)", (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir); + /* Nb: *_high_tide are unset when == UINT_MAX */ + xasprintf (&perf, "%s %s", perf, + perfdata (perf_ilabel, + path->inodes_used, "", + (warning_high_tide != UINT_MAX ? TRUE : FALSE), warning_high_tide, + (critical_high_tide != UINT_MAX ? TRUE : FALSE), critical_high_tide, + TRUE, 0, + TRUE, path->inodes_total)); + } + if (disk_result==STATE_OK && erronly && !verbose) continue; @@ -455,6 +481,7 @@ process_arguments (int argc, char **argv) {"ignore-eregi-partition", required_argument, 0, 'I'}, {"local", no_argument, 0, 'l'}, {"stat-remote-fs", no_argument, 0, 'L'}, + {"iperfdata", no_argument, 0, 'P'}, {"mountpoint", no_argument, 0, 'M'}, {"errors-only", no_argument, 0, 'e'}, {"exact-match", no_argument, 0, 'E'}, @@ -477,7 +504,7 @@ process_arguments (int argc, char **argv) strcpy (argv[c], "-t"); while (1) { - c = getopt_long (argc, argv, "+?VqhvefCt:c:w:K:W:u:p:x:X:N:mklLg:R:r:i:I:MEA", longopts, &option); + c = getopt_long (argc, argv, "+?VqhvefCt:c:w:K:W:u:p:x:X:N:mklLPg:R:r:i:I:MEA", longopts, &option); if (c == -1 || c == EOF) break; @@ -582,9 +609,13 @@ process_arguments (int argc, char **argv) break; case 'L': stat_remote_fs = 1; + /* fallthrough */ case 'l': show_local_fs = 1; break; + case 'P': + display_inodes_perfdata = 1; + break; case 'p': /* select path */ if (! (warn_freespace_units || crit_freespace_units || warn_freespace_percent || crit_freespace_percent || warn_usedspace_units || crit_usedspace_units || @@ -1012,6 +1043,8 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { p->dtotal_units += p_list->dtotal_units; p->inodes_total += p_list->inodes_total; p->inodes_free += p_list->inodes_free; + p->inodes_free_to_root += p_list->inodes_free_to_root; + p->inodes_used += p_list->inodes_used; } first = 0; } @@ -1050,7 +1083,18 @@ get_path_stats (struct parameter_list *p, struct fs_usage *fsp) { p->dused_units = p->used*fsp->fsu_blocksize/mult; p->dfree_units = p->available*fsp->fsu_blocksize/mult; p->dtotal_units = p->total*fsp->fsu_blocksize/mult; - p->inodes_total = fsp->fsu_files; /* Total file nodes. */ - p->inodes_free = fsp->fsu_ffree; /* Free file nodes. */ + /* Free file nodes. Not sure the workaround is required, but in case...*/ + p->inodes_free = fsp->fsu_favail > fsp->fsu_ffree ? 0 : fsp->fsu_favail; + p->inodes_free_to_root = fsp->fsu_ffree; /* Free file nodes for root. */ + p->inodes_used = fsp->fsu_files - fsp->fsu_ffree; + if (freespace_ignore_reserved) { + /* option activated : we substract the root-reserved inodes from the total */ + /* not all OS report fsp->fsu_favail, only the ones with statvfs syscall */ + /* for others, fsp->fsu_ffree == fsp->fsu_favail */ + p->inodes_total = fsp->fsu_files - p->inodes_free_to_root + p->inodes_free; + } else { + /* default behaviour : take all the inodes into account */ + p->inodes_total = fsp->fsu_files; + } np_add_name(&seen, p->best_match->me_mountdir); } -- cgit v0.10-9-g596f From 7a660b3f018e0903e098cbd2e766a9af18f6723f Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Mon, 10 Dec 2018 13:43:09 +0000 Subject: check_icmp: move opts string into a variable This commit moves the opts string into a variable as it is now used twice. Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 1a2a177..6a883a8 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -410,6 +410,7 @@ main(int argc, char **argv) #ifdef SO_TIMESTAMP int on = 1; #endif + char * opts_str = "vhVw:c:n:p:t:H:s:i:b:I:l:m:64"; setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); @@ -462,7 +463,7 @@ main(int argc, char **argv) /* Parse protocol arguments first */ for(i = 1; i < argc; i++) { - while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { + while((arg = getopt(argc, argv, opts_str)) != EOF) { unsigned short size; switch(arg) { case '4': @@ -484,7 +485,7 @@ main(int argc, char **argv) /* parse the arguments */ for(i = 1; i < argc; i++) { - while((arg = getopt(argc, argv, "vhVw:c:n:p:t:H:s:i:b:I:l:m:64")) != EOF) { + while((arg = getopt(argc, argv, opts_str)) != EOF) { unsigned short size; switch(arg) { case 'v': -- cgit v0.10-9-g596f From ca6efcd02b203e9e07b869af050c1b9849e04608 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Mon, 10 Dec 2018 13:49:13 +0000 Subject: check_icmp: emit error if multiple protocol version As we do not support checking both IPv4 and IPv6 hosts in one execution we emit an error if multiple protocol versions are defined in the cmd line args. Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 6a883a8..98891f0 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -467,10 +467,14 @@ main(int argc, char **argv) unsigned short size; switch(arg) { case '4': + if (address_family != -1) + crash("Multiple protocol versions not supported"); address_family = AF_INET; break; case '6': #ifdef USE_IPV6 + if (address_family != -1) + crash("Multiple protocol versions not supported"); address_family = AF_INET6; #else usage (_("IPv6 support not available\n")); -- cgit v0.10-9-g596f From 4a4ef0d6898cd1590561cd7685d1b8b02b757823 Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Mon, 10 Dec 2018 14:00:43 +0000 Subject: check_icmp: Do not overwrite -4,-6 on lookup In case we needed to do a lookup, we previously overwrote the address_family to IPv6, even if we supplied -4 as a cmd line argument. This commit should ensure the cmd line argument is always followed. Signed-off-by: Jacob Hansen diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 98891f0..e45fdf6 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -1336,7 +1336,7 @@ add_target(char *arg) switch (address_family) { case -1: - // -4 and -6 are not specified on cmdline + /* -4 and -6 are not specified on cmdline */ address_family = AF_INET; sin = (struct sockaddr_in *)&ip; result = inet_pton(address_family, arg, &sin->sin_addr); @@ -1347,6 +1347,10 @@ add_target(char *arg) result = inet_pton(address_family, arg, &sin6->sin6_addr); } #endif + /* If we don't find any valid addresses, we still don't know the address_family */ + if ( result != 1) { + address_family = -1; + } break; case AF_INET: sin = (struct sockaddr_in *)&ip; @@ -1367,7 +1371,11 @@ add_target(char *arg) else { errno = 0; memset(&hints, 0, sizeof(hints)); - hints.ai_family = AF_UNSPEC; + if (address_family == -1) { + hints.ai_family = AF_UNSPEC; + } else { + hints.ai_family = address_family == AF_INET ? PF_INET : PF_INET6; + } hints.ai_socktype = SOCK_RAW; if((error = getaddrinfo(arg, NULL, &hints, &res)) != 0) { errno = 0; -- cgit v0.10-9-g596f From f79f016238f436b94dfeb04c981de3a6d3e9d31c Mon Sep 17 00:00:00 2001 From: Kostyantyn Hushchyn Date: Tue, 7 Sep 2010 14:54:20 +0300 Subject: check_hpjd: Added -D option to disable warning on 'out of paper' Signed-off-by: Kostyantyn Hushchyn diff --git a/plugins/check_hpjd.c b/plugins/check_hpjd.c index f159f5a..6546556 100644 --- a/plugins/check_hpjd.c +++ b/plugins/check_hpjd.c @@ -67,6 +67,7 @@ void print_usage (void); char *community = NULL; char *address = NULL; char *port = NULL; +int check_paper_out = 1; int main (int argc, char **argv) @@ -240,7 +241,8 @@ main (int argc, char **argv) strcpy (errmsg, _("Paper Jam")); } else if (paper_out) { - result = STATE_WARNING; + if (check_paper_out) + result = STATE_WARNING; strcpy (errmsg, _("Out of Paper")); } else if (line_status == OFFLINE) { @@ -325,7 +327,7 @@ process_arguments (int argc, char **argv) while (1) { - c = getopt_long (argc, argv, "+hVH:C:p:", longopts, &option); + c = getopt_long (argc, argv, "+hVH:C:p:D", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -347,6 +349,8 @@ process_arguments (int argc, char **argv) usage2 (_("Port must be a positive short integer"), optarg); else port = atoi(optarg); + case 'D': /* disable paper out check*/ + check_paper_out = 0; break; case 'V': /* version */ print_revision (progname, NP_VERSION); @@ -420,6 +424,8 @@ print_help (void) printf (" %s", _("Specify the port to check ")); printf (_("(default=%s)"), DEFAULT_PORT); printf ("\n"); + printf (" %s\n", "-D"); + printf (" %s", _("Disable paper check ")); printf (UT_SUPPORT); } @@ -430,5 +436,5 @@ void print_usage (void) { printf ("%s\n", _("Usage:")); - printf ("%s -H host [-C community] [-p port]\n", progname); + printf ("%s -H host [-C community] [-p port] [-D]\n", progname); } -- cgit v0.10-9-g596f From 8520c643dd35bbeebbf36c7145d3f8c12dfaf70b Mon Sep 17 00:00:00 2001 From: Iustin Pop Date: Fri, 18 Jan 2019 22:52:54 +0100 Subject: Simply initializes n before it is used When SSL is enabled, n is assigned the size of the server's second EHLO response (I think in bytes), which will usually be significantly higher than the command passed. As such, no commands are executed and no responses are checked, which - silently - defeats the desired checks and results in a success value. diff --git a/plugins/check_smtp.c b/plugins/check_smtp.c index 0fcf4c6..d37c57c 100644 --- a/plugins/check_smtp.c +++ b/plugins/check_smtp.c @@ -293,6 +293,7 @@ main (int argc, char **argv) printf("%s", buffer); } + n = 0; while (n < ncommands) { xasprintf (&cmd_str, "%s%s", commands[n], "\r\n"); my_send(cmd_str, strlen(cmd_str)); -- cgit v0.10-9-g596f From 22f47fc0c51266bd25491da30fd165a845a1391b Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 21 Jan 2019 17:41:02 +0100 Subject: tests: make check_snmp test more reliable The check_snmp rate tests depend on the exact amount of time spend between the plugin runs and will fail on busy machines, ex. the ci servers. Using faketime mitigates this issue and also removes all the sleeps. Signed-off-by: Sven Nierlein diff --git a/plugins/tests/check_snmp.t b/plugins/tests/check_snmp.t index 73a68b2..85d6bf5 100755 --- a/plugins/tests/check_snmp.t +++ b/plugins/tests/check_snmp.t @@ -7,6 +7,7 @@ use strict; use Test::More; use NPTest; use FindBin qw($Bin); +use POSIX qw/strftime/; my $tests = 67; # Check that all dependent modules are available @@ -37,6 +38,7 @@ if ($@) { my $port_snmp = 16100 + int(rand(100)); +my $faketime = -x '/usr/bin/faketime' ? 1 : 0; # Start up server my @pids; @@ -118,77 +120,81 @@ like($res->output, '/'.quotemeta('SNMP OK - And now have fun with with this: \"C "And now have fun with with this: \"C:\\\\\" because we\'re not done yet!"').'/m', "Attempt to confuse parser No.3"); -system("rm -f ".$ENV{'MP_STATE_PATH'}."/check_snmp/*"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); -is($res->return_code, 0, "Returns OK"); -is($res->output, "No previous data to calculate rate - assume okay"); +system("rm -f ".$ENV{'MP_STATE_PATH'}."/*/check_snmp/*"); -# Need to sleep, otherwise duration=0 -sleep 1; +# run rate checks with faketime. rate checks depend on the exact amount of time spend between the +# plugin runs which may fail on busy machines. +# using faketime removes this race condition and also saves all the sleeps in between. +SKIP: { + skip "No faketime binary found", 28 if !$faketime; -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); -is($res->return_code, 1, "WARNING - due to going above rate calculation" ); -is($res->output, "SNMP RATE WARNING - *666* | iso.3.6.1.4.1.8072.3.2.67.10=666;600 "); + my $ts = time(); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); + is($res->return_code, 0, "Returns OK"); + is($res->output, "No previous data to calculate rate - assume okay"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); -is($res->return_code, 3, "UNKNOWN - basically the divide by zero error" ); -is($res->output, "Time duration between plugin calls is invalid"); + # test rate 1 second later + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); + is($res->return_code, 1, "WARNING - due to going above rate calculation" ); + is($res->output, "SNMP RATE WARNING - *666* | iso.3.6.1.4.1.8072.3.2.67.10=666;600 "); + # test rate with same time + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -w 600" ); + is($res->return_code, 3, "UNKNOWN - basically the divide by zero error" ); + is($res->output, "Time duration between plugin calls is invalid"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); -is($res->return_code, 0, "OK for first call" ); -is($res->output, "No previous data to calculate rate - assume okay" ); -# Need to sleep, otherwise duration=0 -sleep 1; + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); + is($res->return_code, 0, "OK for first call" ); + is($res->output, "No previous data to calculate rate - assume okay" ); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP RATE OK - inoctets 666 | inoctets=666 ", "Check label"); + # test rate 1 second later + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP RATE OK - inoctets 666 | inoctets=666 ", "Check label"); -sleep 2; + # test rate 3 seconds later + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+3))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP RATE OK - inoctets 333 | inoctets=333 ", "Check rate decreases due to longer interval"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP RATE OK - inoctets 333 | inoctets=333 ", "Check rate decreases due to longer interval"); + # label performance data check + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l test" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - test 67996 | test=67996c ", "Check label"); -# label performance data check -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l test" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - test 67996 | test=67996c ", "Check label"); + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l \"test'test\"" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - test'test 68662 | \"test'test\"=68662c ", "Check label"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l \"test'test\"" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - test'test 68662 | \"test'test\"=68662c ", "Check label"); + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l 'test\"test'" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - test\"test 69328 | 'test\"test'=69328c ", "Check label"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l 'test\"test'" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - test\"test 69328 | 'test\"test'=69328c ", "Check label"); + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l test -O" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - test 69994 | iso.3.6.1.4.1.8072.3.2.67.10=69994c ", "Check label"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l test -O" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - test 69994 | iso.3.6.1.4.1.8072.3.2.67.10=69994c ", "Check label"); + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - 70660 | iso.3.6.1.4.1.8072.3.2.67.10=70660c ", "Check label"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - 70660 | iso.3.6.1.4.1.8072.3.2.67.10=70660c ", "Check label"); + $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l 'test test'" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP OK - test test 71326 | 'test test'=71326c ", "Check label"); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 -l 'test test'" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP OK - test test 71326 | 'test test'=71326c ", "Check label"); + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets_per_minute --rate-multiplier=60" ); + is($res->return_code, 0, "OK for first call" ); + is($res->output, "No previous data to calculate rate - assume okay" ); -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets_per_minute --rate-multiplier=60" ); -is($res->return_code, 0, "OK for first call" ); -is($res->output, "No previous data to calculate rate - assume okay" ); - -# Need to sleep, otherwise duration=0 -sleep 1; + # test 1 second later + $res = NPTest->testCmd("LC_TIME=C TZ=UTC faketime -f '".strftime("%Y-%m-%d %H:%M:%S", localtime($ts+1))."' ./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets_per_minute --rate-multiplier=60" ); + is($res->return_code, 0, "OK as no thresholds" ); + is($res->output, "SNMP RATE OK - inoctets_per_minute 39960 | inoctets_per_minute=39960 ", "Checking multiplier"); +}; -$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10 --rate -l inoctets_per_minute --rate-multiplier=60" ); -is($res->return_code, 0, "OK as no thresholds" ); -is($res->output, "SNMP RATE OK - inoctets_per_minute 39960 | inoctets_per_minute=39960 ", "Checking multiplier"); $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.11 -s '\"stringtests\"'" ); -- cgit v0.10-9-g596f From 0ec21334c3add0e3e7d345da11ce438797bf40df Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Sat, 2 Feb 2019 16:36:47 +0100 Subject: travis-ci: Switch over to xenial diff --git a/.travis.yml b/.travis.yml index 712f247..dce12f5 100644 --- a/.travis.yml +++ b/.travis.yml @@ -1,5 +1,5 @@ sudo: required -dist: trusty +dist: xenial language: c env: -- cgit v0.10-9-g596f From a8d96ce2c6bd5ed10b77ac0fe4cb6979c7027e19 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Sat, 2 Feb 2019 16:47:07 +0100 Subject: travis-ci: Remove backports ppa diff --git a/.travis.yml b/.travis.yml index dce12f5..d7716fa 100644 --- a/.travis.yml +++ b/.travis.yml @@ -39,7 +39,6 @@ before_install: - "sudo killall -9 ntpd ||:" # Trusty has no swap, lets create some - sudo fallocate -l 20M /swapfile; sudo chmod 600 /swapfile; sudo mkswap /swapfile; sudo swapon /swapfile - - sudo add-apt-repository -y ppa:waja/trusty-backports - sudo apt-get update -qq - sudo apt-get purge -qq gawk -- cgit v0.10-9-g596f From 0ca6c28ebfcf647b72ec2f62a75ef846aad58754 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Sat, 2 Feb 2019 16:52:08 +0100 Subject: travis-ci: The package name is now 'squid' diff --git a/.travis.yml b/.travis.yml index d7716fa..43e8ee8 100644 --- a/.travis.yml +++ b/.travis.yml @@ -51,7 +51,7 @@ install: - sudo apt-get install -qq --no-install-recommends autoconf automake - sudo apt-get install -qq --no-install-recommends faketime - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl - - sudo apt-get install -qq --no-install-recommends squid3 + - sudo apt-get install -qq --no-install-recommends squid # Trusty related dependencies (not yet provided) - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server # enable ssl apache @@ -59,8 +59,8 @@ install: - sudo a2ensite default-ssl - sudo make-ssl-cert generate-default-snakeoil --force-overwrite - sudo service apache2 reload - - sudo cp tools/squid.conf /etc/squid3/squid.conf - - sudo service squid3 reload + - sudo cp tools/squid.conf /etc/squid/squid.conf + - sudo service squid reload before_script: # ensure we have a test database in place for tests -- cgit v0.10-9-g596f From 2416aaadd879caae33438e09f6d2eeffdb5434c2 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Sat, 2 Feb 2019 17:26:01 +0100 Subject: travis-ci: Restart mysql diff --git a/.travis.yml b/.travis.yml index 43e8ee8..134d218 100644 --- a/.travis.yml +++ b/.travis.yml @@ -61,6 +61,7 @@ install: - sudo service apache2 reload - sudo cp tools/squid.conf /etc/squid/squid.conf - sudo service squid reload + - sudo service mysql restart before_script: # ensure we have a test database in place for tests -- cgit v0.10-9-g596f From 2dcfbbcad03baf1124644184ec072ac0dba024f7 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Mon, 4 Feb 2019 14:24:29 +0100 Subject: travis-ci: Use RSA keys for SSH tests diff --git a/.travis.yml b/.travis.yml index 134d218..946345c 100644 --- a/.travis.yml +++ b/.travis.yml @@ -73,8 +73,8 @@ before_script: - make - export NPTEST_ACCEPTDEFAULT=1 - export NPTEST_CACHE="$(pwd)/plugins/t/NPTest.cache.travis" - - ssh-keygen -t dsa -N "" -f ~/.ssh/id_dsa - - cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys + - ssh-keygen -t rsa -N "" -f ~/.ssh/id_rsa + - cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys - ssh-keyscan localhost >> ~/.ssh/known_hosts - touch ~/.ssh/config - sudo rm -f /usr/share/mibs/ietf/SNMPv2-PDU /usr/share/mibs/ietf/IPSEC-SPD-MIB /usr/share/mibs/ietf/IPATM-IPMC-MIB /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB diff --git a/plugins/t/NPTest.cache.travis b/plugins/t/NPTest.cache.travis index 6ee4505..9b9f805 100644 --- a/plugins/t/NPTest.cache.travis +++ b/plugins/t/NPTest.cache.travis @@ -50,5 +50,5 @@ 'NP_SNMP_USER' => '', 'NP_SSH_CONFIGFILE' => '~/.ssh/config', 'NP_SSH_HOST' => 'localhost', - 'NP_SSH_IDENTITY' => '~/.ssh/id_dsa' + 'NP_SSH_IDENTITY' => '~/.ssh/id_rsa' } -- cgit v0.10-9-g596f From f7f0f7d4671300e54e5d70278fa419c2782d9ef6 Mon Sep 17 00:00:00 2001 From: Tobias Wolf Date: Tue, 12 Feb 2019 13:01:23 +0100 Subject: Also support the --show-body/-B flag when --expect is used diff --git a/plugins/check_http.c b/plugins/check_http.c index 856e1e9..de59a06 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -1155,6 +1155,8 @@ check_http (void) xasprintf (&msg, _("Invalid HTTP response received from host on port %d: %s\n"), server_port, status_line); + if (show_body) + xasprintf (&msg, _("%s\n%s"), msg, page); die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); } -- cgit v0.10-9-g596f From 7cafb0e84550035fe671662c293122be975065ca Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Fri, 15 Feb 2019 10:36:28 +0100 Subject: check_by_ssh: fix child process leak on timeouts When check_by_ssh runs into a timeout it simply exits keeping all child processes running. Simply adopting the kill loop from runcmd_timeout_alarm_handler() fixes this. Signed-off-by: Sven Nierlein diff --git a/lib/utils_base.c b/lib/utils_base.c index 19a531f..fd7058d 100644 --- a/lib/utils_base.c +++ b/lib/utils_base.c @@ -37,6 +37,9 @@ monitoring_plugin *this_monitoring_plugin=NULL; +unsigned int timeout_state = STATE_CRITICAL; +unsigned int timeout_interval = DEFAULT_SOCKET_TIMEOUT; + int _np_state_read_file(FILE *); void np_init( char *plugin_name, int argc, char **argv ) { @@ -359,6 +362,22 @@ char *np_extract_value(const char *varlist, const char *name, char sep) { return value; } +const char * +state_text (int result) +{ + switch (result) { + case STATE_OK: + return "OK"; + case STATE_WARNING: + return "WARNING"; + case STATE_CRITICAL: + return "CRITICAL"; + case STATE_DEPENDENT: + return "DEPENDENT"; + default: + return "UNKNOWN"; + } +} /* * Read a string representing a state (ok, warning... or numeric: 0, 1) and diff --git a/lib/utils_base.h b/lib/utils_base.h index 42ae0c0..d7e7dff 100644 --- a/lib/utils_base.h +++ b/lib/utils_base.h @@ -61,6 +61,10 @@ void print_thresholds(const char *, thresholds *); int check_range(double, range *); int get_status(double, thresholds *); +/* Handle timeouts */ +extern unsigned int timeout_state; +extern unsigned int timeout_interval; + /* All possible characters in a threshold range */ #define NP_THRESHOLDS_CHARS "-0123456789.:@~" @@ -107,5 +111,6 @@ void np_state_write_string(time_t, char *); void np_init(char *, int argc, char **argv); void np_set_args(int argc, char **argv); void np_cleanup(); +const char *state_text (int); #endif /* _UTILS_BASE_ */ diff --git a/lib/utils_cmd.c b/lib/utils_cmd.c index 7eb9a3a..795840d 100644 --- a/lib/utils_cmd.c +++ b/lib/utils_cmd.c @@ -40,6 +40,7 @@ /** includes **/ #include "common.h" +#include "utils.h" #include "utils_cmd.h" #include "utils_base.h" #include @@ -65,31 +66,6 @@ extern char **environ; # define SIG_ERR ((Sigfunc *)-1) #endif -/* This variable must be global, since there's no way the caller - * can forcibly slay a dead or ungainly running program otherwise. - * Multithreading apps and plugins can initialize it (via CMD_INIT) - * in an async safe manner PRIOR to calling cmd_run() or cmd_run_array() - * for the first time. - * - * The check for initialized values is atomic and can - * occur in any number of threads simultaneously. */ -static pid_t *_cmd_pids = NULL; - -/* Try sysconf(_SC_OPEN_MAX) first, as it can be higher than OPEN_MAX. - * If that fails and the macro isn't defined, we fall back to an educated - * guess. There's no guarantee that our guess is adequate and the program - * will die with SIGSEGV if it isn't and the upper boundary is breached. */ -#define DEFAULT_MAXFD 256 /* fallback value if no max open files value is set */ -#define MAXFD_LIMIT 8192 /* upper limit of open files */ -#ifdef _SC_OPEN_MAX -static long maxfd = 0; -#elif defined(OPEN_MAX) -# define maxfd OPEN_MAX -#else /* sysconf macro unavailable, so guess (may be wildly inaccurate) */ -# define maxfd DEFAULT_MAXFD -#endif - - /** prototypes **/ static int _cmd_open (char *const *, int *, int *) __attribute__ ((__nonnull__ (1, 2, 3))); @@ -406,3 +382,19 @@ cmd_file_read ( char *filename, output *out, int flags) return 0; } + +void +timeout_alarm_handler (int signo) +{ + size_t i; + if (signo == SIGALRM) { + printf (_("%s - Plugin timed out after %d seconds\n"), + state_text(timeout_state), timeout_interval); + + if(_cmd_pids) for(i = 0; i < maxfd; i++) { + if(_cmd_pids[i] != 0) kill(_cmd_pids[i], SIGKILL); + } + + exit (timeout_state); + } +} diff --git a/lib/utils_cmd.h b/lib/utils_cmd.h index ebaf15b..6f3aeb8 100644 --- a/lib/utils_cmd.h +++ b/lib/utils_cmd.h @@ -32,4 +32,17 @@ void cmd_init (void); #define CMD_NO_ARRAYS 0x01 /* don't populate arrays at all */ #define CMD_NO_ASSOC 0x02 /* output.line won't point to buf */ +/* This variable must be global, since there's no way the caller + * can forcibly slay a dead or ungainly running program otherwise. + * Multithreading apps and plugins can initialize it (via CMD_INIT) + * in an async safe manner PRIOR to calling cmd_run() or cmd_run_array() + * for the first time. + * + * The check for initialized values is atomic and can + * occur in any number of threads simultaneously. */ +static pid_t *_cmd_pids = NULL; + +RETSIGTYPE timeout_alarm_handler (int); + + #endif /* _UTILS_CMD_ */ diff --git a/plugins/check_dbi.c b/plugins/check_dbi.c index 826eb8d..ced13d0 100644 --- a/plugins/check_dbi.c +++ b/plugins/check_dbi.c @@ -35,6 +35,7 @@ const char *email = "devel@monitoring-plugins.org"; #include "common.h" #include "utils.h" +#include "utils_cmd.h" #include "netutils.h" diff --git a/plugins/check_pgsql.c b/plugins/check_pgsql.c index 5cd4709..11ce691 100644 --- a/plugins/check_pgsql.c +++ b/plugins/check_pgsql.c @@ -34,6 +34,7 @@ const char *email = "devel@monitoring-plugins.org"; #include "common.h" #include "utils.h" +#include "utils_cmd.h" #include "netutils.h" #include diff --git a/plugins/common.h b/plugins/common.h index 6bf4fca..0f08e2f 100644 --- a/plugins/common.h +++ b/plugins/common.h @@ -225,4 +225,18 @@ enum { # define __attribute__(x) /* do nothing */ #endif +/* Try sysconf(_SC_OPEN_MAX) first, as it can be higher than OPEN_MAX. + * If that fails and the macro isn't defined, we fall back to an educated + * guess. There's no guarantee that our guess is adequate and the program + * will die with SIGSEGV if it isn't and the upper boundary is breached. */ +#define DEFAULT_MAXFD 256 /* fallback value if no max open files value is set */ +#define MAXFD_LIMIT 8192 /* upper limit of open files */ +#ifdef _SC_OPEN_MAX +static long maxfd = 0; +#elif defined(OPEN_MAX) +# define maxfd OPEN_MAX +#else /* sysconf macro unavailable, so guess (may be wildly inaccurate) */ +# define maxfd DEFAULT_MAXFD +#endif + #endif /* _COMMON_H_ */ diff --git a/plugins/popen.c b/plugins/popen.c index 592263f..116d168 100644 --- a/plugins/popen.c +++ b/plugins/popen.c @@ -78,7 +78,6 @@ RETSIGTYPE popen_timeout_alarm_handler (int); #define min(a,b) ((a) < (b) ? (a) : (b)) #define max(a,b) ((a) > (b) ? (a) : (b)) -int open_max (void); /* {Prog openmax} */ static void err_sys (const char *, ...) __attribute__((noreturn,format(printf, 1, 2))); char *rtrim (char *, const char *); @@ -86,7 +85,6 @@ char *pname = NULL; /* caller can set this from argv[0] */ /*int *childerr = NULL;*//* ptr to array allocated at run-time */ /*extern pid_t *childpid = NULL; *//* ptr to array allocated at run-time */ -static int maxfd; /* from our open_max(), {Prog openmax} */ #ifdef REDHAT_SPOPEN_ERROR static volatile int childtermd = 0; @@ -187,13 +185,11 @@ spopen (const char *cmdstring) argv[i] = NULL; if (childpid == NULL) { /* first time through */ - maxfd = open_max (); /* allocate zeroed out array for child pids */ if ((childpid = calloc ((size_t)maxfd, sizeof (pid_t))) == NULL) return (NULL); } if (child_stderr_array == NULL) { /* first time through */ - maxfd = open_max (); /* allocate zeroed out array for child pids */ if ((child_stderr_array = calloc ((size_t)maxfd, sizeof (int))) == NULL) return (NULL); } @@ -273,15 +269,6 @@ spclose (FILE * fp) return (1); } -#ifdef OPEN_MAX -static int openmax = OPEN_MAX; -#else -static int openmax = 0; -#endif - -#define OPEN_MAX_GUESS 256 /* if OPEN_MAX is indeterminate */ - /* no guarantee this is adequate */ - #ifdef REDHAT_SPOPEN_ERROR RETSIGTYPE popen_sigchld_handler (int signo) @@ -311,22 +298,6 @@ popen_timeout_alarm_handler (int signo) } -int -open_max (void) -{ - if (openmax == 0) { /* first time through */ - errno = 0; - if ((openmax = sysconf (_SC_OPEN_MAX)) < 0) { - if (errno == 0) - openmax = OPEN_MAX_GUESS; /* it's indeterminate */ - else - err_sys (_("sysconf error for _SC_OPEN_MAX")); - } - } - return (openmax); -} - - /* Fatal error related to a system call. * Print a message and die. */ diff --git a/plugins/runcmd.c b/plugins/runcmd.c index 1a7c904..c382867 100644 --- a/plugins/runcmd.c +++ b/plugins/runcmd.c @@ -67,19 +67,6 @@ * occur in any number of threads simultaneously. */ static pid_t *np_pids = NULL; -/* Try sysconf(_SC_OPEN_MAX) first, as it can be higher than OPEN_MAX. - * If that fails and the macro isn't defined, we fall back to an educated - * guess. There's no guarantee that our guess is adequate and the program - * will die with SIGSEGV if it isn't and the upper boundary is breached. */ -#ifdef _SC_OPEN_MAX -static long maxfd = 0; -#elif defined(OPEN_MAX) -# define maxfd OPEN_MAX -#else /* sysconf macro unavailable, so guess (may be wildly inaccurate) */ -# define maxfd 256 -#endif - - /** prototypes **/ static int np_runcmd_open(const char *, int *, int *) __attribute__((__nonnull__(1, 2, 3))); diff --git a/plugins/utils.c b/plugins/utils.c index 231af92..ee62013 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -36,9 +36,6 @@ extern const char *progname; #define STRLEN 64 #define TXTBLK 128 -unsigned int timeout_state = STATE_CRITICAL; -unsigned int timeout_interval = DEFAULT_SOCKET_TIMEOUT; - time_t start_time, end_time; /* ************************************************************************** @@ -148,33 +145,6 @@ print_revision (const char *command_name, const char *revision) command_name, revision, PACKAGE, VERSION); } -const char * -state_text (int result) -{ - switch (result) { - case STATE_OK: - return "OK"; - case STATE_WARNING: - return "WARNING"; - case STATE_CRITICAL: - return "CRITICAL"; - case STATE_DEPENDENT: - return "DEPENDENT"; - default: - return "UNKNOWN"; - } -} - -void -timeout_alarm_handler (int signo) -{ - if (signo == SIGALRM) { - printf (_("%s - Plugin timed out after %d seconds\n"), - state_text(timeout_state), timeout_interval); - exit (timeout_state); - } -} - int is_numeric (char *number) { @@ -708,4 +678,3 @@ char *sperfdata_int (const char *label, return data; } - diff --git a/plugins/utils.h b/plugins/utils.h index a436e1c..6aa316f 100644 --- a/plugins/utils.h +++ b/plugins/utils.h @@ -29,13 +29,6 @@ suite of plugins. */ void support (void); void print_revision (const char *, const char *); -/* Handle timeouts */ - -extern unsigned int timeout_state; -extern unsigned int timeout_interval; - -RETSIGTYPE timeout_alarm_handler (int); - extern time_t start_time, end_time; /* Test input types */ @@ -89,8 +82,6 @@ void usage4(const char *) __attribute__((noreturn)); void usage5(void) __attribute__((noreturn)); void usage_va(const char *fmt, ...) __attribute__((noreturn)); -const char *state_text (int); - #define max(a,b) (((a)>(b))?(a):(b)) #define min(a,b) (((a)<(b))?(a):(b)) -- cgit v0.10-9-g596f From 763eb740b3240458cbb9ed6c6356bfc5b9a18e71 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Fri, 15 Feb 2019 17:31:29 +0100 Subject: check_dns: fix typo in parameter description diff --git a/plugins/check_dns.c b/plugins/check_dns.c index 25bd31d..d4d0b88 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -554,7 +554,7 @@ print_help (void) printf (" -c, --critical=seconds\n"); printf (" %s\n", _("Return critical if elapsed time exceeds value. Default off")); printf (" -L, --all\n"); - printf (" %s\n", _("Return critical the list of expected addresses does not match all addresses")); + printf (" %s\n", _("Return critical if the list of expected addresses does not match all addresses")); printf (" %s\n", _("returned. Default off")); printf (UT_CONN_TIMEOUT, DEFAULT_SOCKET_TIMEOUT); -- cgit v0.10-9-g596f From 8442ed5b41a68f6623492235b132c21735d51897 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 19 Feb 2019 16:35:28 +0100 Subject: renew test certificates Signed-off-by: Sven Nierlein diff --git a/plugins/tests/certs/server-cert.pem b/plugins/tests/certs/server-cert.pem index 549e4f7..b84b91d 100644 --- a/plugins/tests/certs/server-cert.pem +++ b/plugins/tests/certs/server-cert.pem @@ -1,21 +1,24 @@ -----BEGIN CERTIFICATE----- -MIIDYzCCAsygAwIBAgIJAL8LkpNwzYdxMA0GCSqGSIb3DQEBBAUAMH8xCzAJBgNV -BAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIxFzAV -BgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwGCSqG -SIb3DQEJARYPdG9udm9vbkBtYWMuY29tMB4XDTA5MDMwNTIxNDEyOFoXDTE5MDMw -MzIxNDEyOFowfzELMAkGA1UEBhMCVUsxEzARBgNVBAgTCkRlcmJ5c2hpcmUxDzAN -BgNVBAcTBkJlbHBlcjEXMBUGA1UEChMOTmFnaW9zIFBsdWdpbnMxETAPBgNVBAMT -CFRvbiBWb29uMR4wHAYJKoZIhvcNAQkBFg90b252b29uQG1hYy5jb20wgZ8wDQYJ -KoZIhvcNAQEBBQADgY0AMIGJAoGBAKcWMBtNtfY8vZXk0SN6/EYTVN/LOvaOSegy -oVdLoGwuwjagk+XmCzvCqHZRp8lnCLay7AO8AQI7TSN02ihCcSrgGA9OT+HciIJ1 -l5/kEYUAuA1PR6YKK/T713zUAlMzy2tsugx5+xSsSEwsXkmne52jJiG/wuE5CLT0 -9pF8HQqHAgMBAAGjgeYwgeMwHQYDVR0OBBYEFGioSPQ/rdE19+zaeY2YvHTXlUDI -MIGzBgNVHSMEgaswgaiAFGioSPQ/rdE19+zaeY2YvHTXlUDIoYGEpIGBMH8xCzAJ -BgNVBAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIx -FzAVBgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwG -CSqGSIb3DQEJARYPdG9udm9vbkBtYWMuY29tggkAvwuSk3DNh3EwDAYDVR0TBAUw -AwEB/zANBgkqhkiG9w0BAQQFAAOBgQCdqasaIO6JiV5ONFG6Tr1++85UfEdZKMUX -N2NHiNNUunolIZEYR+dW99ezKmHlDiQ/tMgoLVYpl2Ubho2pAkLGQR+W0ZASgWQ1 -NjfV27Rv0y6lYQMTA0lVAU93L1x9reo3FMedmL5+H+lIEpLCxEPtAJNISrJOneZB -W5jDadwkoQ== +MIIEBjCCAu6gAwIBAgIJANbQ5QQrKhUGMA0GCSqGSIb3DQEBCwUAMIGXMQswCQYD +VQQGEwJERTEQMA4GA1UECAwHQmF2YXJpYTEPMA0GA1UEBwwGTXVuaWNoMRswGQYD +VQQKDBJNb25pdG9yaW5nIFBsdWdpbnMxGzAZBgNVBAMMEk1vbml0b3JpbmcgUGx1 +Z2luczErMCkGCSqGSIb3DQEJARYcZGV2ZWxAbW9uaXRvcmluZy1wbHVnaW5zLm9y +ZzAeFw0xOTAyMTkxNTMxNDRaFw0yOTAyMTYxNTMxNDRaMIGXMQswCQYDVQQGEwJE +RTEQMA4GA1UECAwHQmF2YXJpYTEPMA0GA1UEBwwGTXVuaWNoMRswGQYDVQQKDBJN +b25pdG9yaW5nIFBsdWdpbnMxGzAZBgNVBAMMEk1vbml0b3JpbmcgUGx1Z2luczEr +MCkGCSqGSIb3DQEJARYcZGV2ZWxAbW9uaXRvcmluZy1wbHVnaW5zLm9yZzCCASIw +DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAKgV2yp8pQvJuN+aJGdAe6Hd0tja +uteCPcNIcM92WLOF69TLTSYon1XDon4tHTh4Z5d4lD8bfsGzFVBmDSgWidhAUf+v +EqEXwbp293ej/Frc0pXCvmrz6kI1tWrLtQhL/VdbxFYxhV7JjKb+PY3SxGFpSLPe +PQ/5SwVndv7rZIwcjseL22K5Uy2TIrkgzzm2pRs/IvoxRybYr/+LGoHyrtJC6AO8 +ylp8A/etL0gwtUvRnrnZeTQ2pA1uZ5QN3anTL8JP/ZRZYNegIkaawqMtTKbhM6pi +u3/4a3Uppvt0y7vmGfQlYejxCpICnMrvHMpw8L58zv/98AbCGjDU3UwCt6MCAwEA +AaNTMFEwHQYDVR0OBBYEFG/UH6nGYPlVcM75UXzXBF5GZyrcMB8GA1UdIwQYMBaA +FG/UH6nGYPlVcM75UXzXBF5GZyrcMA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcN +AQELBQADggEBAGwitJPOnlIKLndNf+iCLMIs0dxsl8kAaejFcjoT0n4ja7Y6Zrqz +VSIidzz9vQWvy24xKJpAOdj/iLRHCUOG+Pf5fA6+/FiuqXr6gE2/lm0eC58BNONr +E5OzjQ/VoQ8RX4hDntgu6FYbaVa/vhwn16igt9qmdNGGZXf2/+DM3JADwyaA4EK8 +vm7KdofX9zkxXecHPNvf3jiVLPiDDt6tkGpHPEsyP/yc+RUdltUeZvHfliV0cCuC +jJX+Fm9ysjSpHIFFr+jUMuMHibWoOD8iy3eYxfCDoWsH488pCbj8MNuAq6vd6DBk +bOZxDz43vjWuYMkwXJTxJQh7Pne6kK0vE1g= -----END CERTIFICATE----- diff --git a/plugins/tests/certs/server-key.pem b/plugins/tests/certs/server-key.pem index eacaeaa..1194755 100644 --- a/plugins/tests/certs/server-key.pem +++ b/plugins/tests/certs/server-key.pem @@ -1,15 +1,28 @@ ------BEGIN RSA PRIVATE KEY----- -MIICWwIBAAKBgQCnFjAbTbX2PL2V5NEjevxGE1Tfyzr2jknoMqFXS6BsLsI2oJPl -5gs7wqh2UafJZwi2suwDvAECO00jdNooQnEq4BgPTk/h3IiCdZef5BGFALgNT0em -Civ0+9d81AJTM8trbLoMefsUrEhMLF5Jp3udoyYhv8LhOQi09PaRfB0KhwIDAQAB -AoGAfpxclcP8N3vteXErXURrd7pcXT0GECDgNjhvc9PV20RPXM+vYs1AA+fMeeQE -TaRqwO6x016aMRO4rz5ztYArecTBznkds1k59pkN/Ne/nsueU4tvGK8MNyS2o986 -Voohqkaq4Lcy1bcHJb9su1ELjegEr1R76Mz452Hsy+uTbAECQQDcg/tZWKVeh5CQ -dOEB3YWHwfn0NDgfPm/X2i2kAZ7n7URaUy/ffdlfsrr1mBtHCfedLoOxmmlNfEpM -hXAAurSHAkEAwfk7fEb0iN0Sj9gTozO7c6Ky10KwePZyjVzqSQIiJq3NX8BEaIeb -51TXxE5VxaLjjMLRkA0hWTYXClgERFZ6AQJAN7ChPqwzf08PRFwwIw911JY5cOHr -NoDHMCUql5vNLNdwBruxgGjBB/kUXEfgw60RusFvgt/zLh1wiii844JDawJAGQBF -sYP3urg7zzx7c3qUe5gJ0wLuefjR1PSX4ecbfb7DDMdcSdjIuG1QDiZGmd2f1KG7 -nwSCOtxk5dloW2KGAQJAQh/iBn0QhfKLFAP5eZBVk8E8XlZuw+S2DLy5SnBlIiYJ -GB5I2OClgtudXMv1labFrcST8O9eFrtsrhU1iUGUOw== ------END RSA PRIVATE KEY----- +-----BEGIN PRIVATE KEY----- +MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIBAQCoFdsqfKULybjf +miRnQHuh3dLY2rrXgj3DSHDPdlizhevUy00mKJ9Vw6J+LR04eGeXeJQ/G37BsxVQ +Zg0oFonYQFH/rxKhF8G6dvd3o/xa3NKVwr5q8+pCNbVqy7UIS/1XW8RWMYVeyYym +/j2N0sRhaUiz3j0P+UsFZ3b+62SMHI7Hi9tiuVMtkyK5IM85tqUbPyL6MUcm2K// +ixqB8q7SQugDvMpafAP3rS9IMLVL0Z652Xk0NqQNbmeUDd2p0y/CT/2UWWDXoCJG +msKjLUym4TOqYrt/+Gt1Kab7dMu75hn0JWHo8QqSApzK7xzKcPC+fM7//fAGwhow +1N1MArejAgMBAAECggEANuvdTwanTzC8jaNqHaq+OuemS2E9B8nwsGxtH/zFgvNR +WZiMPtmrJnTkFWJcV+VPw/iMSAqN4nDHmBugVOb4Z4asxGTKK4T9shXJSnh0rqPU +00ZsvbmxY6z0+E5TesCJqQ+9GYTY1V357V7JchvaOxIRxWPqg9urHbru8OCtW/I5 +Fh5HPUZlgCvlMpjlhyjydIf/oXyVA3RNsXlwe8+2cKuGIrjEzm2j9o3VF0sctTX0 +ItP8A9qDmDQN7GIWX0MW6gncojpS1omC2wcFsdjj/xfPyiDal1X4aq/2YqG8351c +YlM/+6Va0u9WWE/i64gASTAVqpMV4Yg8y0gGycuA0QKBgQDbgI2QeLd3FvMcURiU +l3w9qJgw/Jp3jaNC/9LkVGGz4f4lKKB67lPZvI4noMK8GqO/LcXgqP/RY1oJojoA +/6JKVvzYGASZ7VgMoG9bk1AneP1PGdibuTUEwimGlcObxnDFIC/yjwPFu3jIdqdS +zZi1RZzyqAogN5y3SBEypSmn9wKBgQDECKsqqlcizmCl8v5aVk875AzGN+DOHZqx +bkmztlnLO/2e2Fmk3G5Vvnui0FYisf8Eq19tUTQCF6lSfJlGQeFAT119wkFZhLu+ +FfLGqoEMH0ijJg/8PpdpFRK3I94YcISoTNN6yxMvE6xdDGfKCt5a+IX5bwQi9Zdc +B242gEc6tQKBgA6tM8n7KFlAIZU9HuWgk2AUC8kKutFPmSD7tgAqXDYI4FNfugs+ +MEEYyHCB4UNujJBV4Ss6YZCAkh6eyD4U2aca1eElCfm40vBVMdzvpqZdAqLtWXxg +D9l3mgszrFaYGCY2Fr6jLV9lP5g3xsxUjudf9jSLY9HvpfzjRrMaNATVAoGBALTl +/vYfPMucwKlC5B7++J0e4/7iv6vUu9SyHocdZh1anb9AjPDKjXLIlZT4RhQ8R0XK +0wOw5JpttU2uN08TKkbLNk3/vYhbKVjPLjrQSseh8sjDLgsqw1QwIxYnniLVakVY +p+rvjSNrNyqicQCMKQavwgocvSd5lJRTMwxOMezlAoGBAKWj71BX+0CK00/2S6lC +TcNcuUPG0d8y1czZ4q6tUlG4htwq1FMOpaghATXjkdsOGTLS+H1aA0Kt7Ai9zDhc +/bzOJEJ+jvBXV4Gcs7jl1r/HTKv0tT9ZSI5Vzkida0rfqxDGzcMVlLuCdH0cb8Iu +N0wdmCAqlQwHR13+F1zrAD7V +-----END PRIVATE KEY----- diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index d6d31de..006f133 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -4,13 +4,13 @@ # # To create the https server certificate: # openssl req -new -x509 -keyout server-key.pem -out server-cert.pem -days 3650 -nodes -# Country Name (2 letter code) [AU]:UK -# State or Province Name (full name) [Some-State]:Derbyshire -# Locality Name (eg, city) []:Belper +# Country Name (2 letter code) [AU]:DE +# State or Province Name (full name) [Some-State]:Bavaria +# Locality Name (eg, city) []:Munich # Organization Name (eg, company) [Internet Widgits Pty Ltd]:Monitoring Plugins # Organizational Unit Name (eg, section) []: -# Common Name (eg, YOUR name) []:Ton Voon -# Email Address []:tonvoon@mac.com +# Common Name (e.g. server FQDN or YOUR name) []:Monitoring Plugins +# Email Address []:devel@monitoring-plugins.org use strict; use Test::More; @@ -194,16 +194,16 @@ SKIP: { $result = NPTest->testCmd( "$command -p $port_https -S -C 14" ); is( $result->return_code, 0, "$command -p $port_https -S -C 14" ); - is( $result->output, 'OK - Certificate \'Ton Voon\' will expire on Sun Mar 3 21:41:28 2019 +0000.', "output ok" ); + is( $result->output, "OK - Certificate 'Monitoring Plugins' will expire on Fri Feb 16 15:31:44 2029 +0000.", "output ok" ); $result = NPTest->testCmd( "$command -p $port_https -S -C 14000" ); is( $result->return_code, 1, "$command -p $port_https -S -C 14000" ); - like( $result->output, '/WARNING - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + like( $result->output, '/WARNING - Certificate \'Monitoring Plugins\' expires in \d+ day\(s\) \(Fri Feb 16 15:31:44 2029 \+0000\)./', "output ok" ); # Expired cert tests $result = NPTest->testCmd( "$command -p $port_https -S -C 13960,14000" ); is( $result->return_code, 2, "$command -p $port_https -S -C 13960,14000" ); - like( $result->output, '/CRITICAL - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + like( $result->output, '/CRITICAL - Certificate \'Monitoring Plugins\' expires in \d+ day\(s\) \(Fri Feb 16 15:31:44 2029 \+0000\)./', "output ok" ); $result = NPTest->testCmd( "$command -p $port_https_expired -S -C 7" ); is( $result->return_code, 2, "$command -p $port_https_expired -S -C 7" ); -- cgit v0.10-9-g596f From 2bc4cc99d2c3fdbbd06af862cb0ae1098895f860 Mon Sep 17 00:00:00 2001 From: Robin Sonefors Date: Fri, 10 May 2013 17:21:34 +0200 Subject: check_mysql: Allow sockets to be specified to -H The help text says that -H accepts a "unix socket (must be an absolute path)". Now that actually corresponds to reality. Signed-off-by: Robin Sonefors diff --git a/plugins/check_mysql.c b/plugins/check_mysql.c index 5773afd..0cba50e 100644 --- a/plugins/check_mysql.c +++ b/plugins/check_mysql.c @@ -379,6 +379,9 @@ process_arguments (int argc, char **argv) if (is_host (optarg)) { db_host = optarg; } + else if (*optarg == '/') { + db_socket = optarg; + } else { usage2 (_("Invalid hostname/address"), optarg); } -- cgit v0.10-9-g596f From a58ea5ec5d5fecce9224d10b7058ac63050db05a Mon Sep 17 00:00:00 2001 From: ChrisWi Date: Thu, 21 Mar 2019 14:18:37 +0100 Subject: improve command examples for 'at least' processes diff --git a/plugins/check_procs.c b/plugins/check_procs.c index 4bcc56b..f7917c3 100644 --- a/plugins/check_procs.c +++ b/plugins/check_procs.c @@ -764,6 +764,11 @@ be the total number of running processes\n\n")); printf (" %s\n", "check_procs -w 2:2 -c 2:1024 -C portsentry"); printf (" %s\n", _("Warning if not two processes with command name portsentry.")); printf (" %s\n\n", _("Critical if < 2 or > 1024 processes")); + printf (" %s\n", "check_procs -c 1: -C sshd"); + printf (" %s\n", _("Critical if not at least 1 process with command sshd")); + printf (" %s\n", "check_procs -w 1024 -c 1: -C sshd"); + printf (" %s\n", _("Warning if > 1024 processes with command name sshd.")); + printf (" %s\n\n", _("Critical if < 1 processes with command name sshd.")); printf (" %s\n", "check_procs -w 10 -a '/usr/local/bin/perl' -u root"); printf (" %s\n", _("Warning alert if > 10 processes with command arguments containing")); printf (" %s\n\n", _("'/usr/local/bin/perl' and owned by root")); -- cgit v0.10-9-g596f From a15d42559800624156a75f388f37e233aeab3688 Mon Sep 17 00:00:00 2001 From: Christopher Odenbach Date: Tue, 9 Apr 2019 09:49:57 +0200 Subject: include -P switch in help diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 1c43e85..844e625 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -935,6 +935,8 @@ print_help (void) printf (" %s\n", _("Display only devices/mountpoints with errors")); printf (" %s\n", "-f, --freespace-ignore-reserved"); printf (" %s\n", _("Don't account root-reserved blocks into freespace in perfdata")); + printf (" %s\n", "-P, --iperfdata"); + printf (" %s\n", _("Display inode usage in perfdata")); printf (" %s\n", "-g, --group=NAME"); printf (" %s\n", _("Group paths. Thresholds apply to (free-)space of all partitions together")); printf (" %s\n", "-k, --kilobytes"); -- cgit v0.10-9-g596f From e8325b39c47e6fbf7c8c1e31f9026870d9520af5 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 25 Apr 2019 13:03:10 +0200 Subject: fix maxfd being zero If _SC_OPEN_MAX is available then maxfd was zero initialized and never set to the value from sysconf. This leads to segfaults with free(): invalid size introduced by commit 7cafb0e84550035fe671662c293122be975065ca. Signed-off-by: Sven Nierlein diff --git a/plugins/popen.c b/plugins/popen.c index 116d168..557fb44 100644 --- a/plugins/popen.c +++ b/plugins/popen.c @@ -78,14 +78,9 @@ RETSIGTYPE popen_timeout_alarm_handler (int); #define min(a,b) ((a) < (b) ? (a) : (b)) #define max(a,b) ((a) > (b) ? (a) : (b)) -static void err_sys (const char *, ...) __attribute__((noreturn,format(printf, 1, 2))); -char *rtrim (char *, const char *); char *pname = NULL; /* caller can set this from argv[0] */ -/*int *childerr = NULL;*//* ptr to array allocated at run-time */ -/*extern pid_t *childpid = NULL; *//* ptr to array allocated at run-time */ - #ifdef REDHAT_SPOPEN_ERROR static volatile int childtermd = 0; #endif @@ -184,6 +179,9 @@ spopen (const char *cmdstring) } argv[i] = NULL; + if(maxfd == 0) + maxfd = open_max(); + if (childpid == NULL) { /* first time through */ if ((childpid = calloc ((size_t)maxfd, sizeof (pid_t))) == NULL) return (NULL); @@ -296,47 +294,3 @@ popen_timeout_alarm_handler (int signo) exit (STATE_CRITICAL); } } - - -/* Fatal error related to a system call. - * Print a message and die. */ - -#define MAXLINE 2048 -static void -err_sys (const char *fmt, ...) -{ - int errnoflag = 1; - int errno_save; - char buf[MAXLINE]; - - va_list ap; - - va_start (ap, fmt); - /* err_doit (1, fmt, ap); */ - errno_save = errno; /* value caller might want printed */ - vsprintf (buf, fmt, ap); - if (errnoflag) - sprintf (buf + strlen (buf), ": %s", strerror (errno_save)); - strcat (buf, "\n"); - fflush (stdout); /* in case stdout and stderr are the same */ - fputs (buf, stderr); - fflush (NULL); /* flushes all stdio output streams */ - va_end (ap); - exit (1); -} - -char * -rtrim (char *str, const char *tok) -{ - int i = 0; - int j = sizeof (str); - - while (str != NULL && i < j) { - if (*(str + i) == *tok) { - sprintf (str + i, "%s", "\0"); - return str; - } - i++; - } - return str; -} diff --git a/plugins/runcmd.c b/plugins/runcmd.c index c382867..a7155d2 100644 --- a/plugins/runcmd.c +++ b/plugins/runcmd.c @@ -86,14 +86,8 @@ extern void die (int, const char *, ...) * through this api and thus achieve async-safeness throughout the api */ void np_runcmd_init(void) { -#ifndef maxfd - if(!maxfd && (maxfd = sysconf(_SC_OPEN_MAX)) < 0) { - /* possibly log or emit a warning here, since there's no - * guarantee that our guess at maxfd will be adequate */ - maxfd = 256; - } -#endif - + if(maxfd == 0) + maxfd = open_max(); if(!np_pids) np_pids = calloc(maxfd, sizeof(pid_t)); } diff --git a/plugins/utils.c b/plugins/utils.c index ee62013..348ec02 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -678,3 +678,19 @@ char *sperfdata_int (const char *label, return data; } + +int +open_max (void) +{ + errno = 0; + if (maxfd > 0) + return(maxfd); + + if ((maxfd = sysconf (_SC_OPEN_MAX)) < 0) { + if (errno == 0) + maxfd = DEFAULT_MAXFD; /* it's indeterminate */ + else + die (STATE_UNKNOWN, _("sysconf error for _SC_OPEN_MAX\n")); + } + return(maxfd); +} diff --git a/plugins/utils.h b/plugins/utils.h index 6aa316f..33a2054 100644 --- a/plugins/utils.h +++ b/plugins/utils.h @@ -97,6 +97,8 @@ char *sperfdata (const char *, double, const char *, char *, char *, char *sperfdata_int (const char *, int, const char *, char *, char *, int, int, int, int); +int open_max (void); + /* The idea here is that, although not every plugin will use all of these, most will or should. Therefore, for consistency, these very common options should have only these meanings throughout the overall suite */ -- cgit v0.10-9-g596f From 1de8c41b6c703a6cea8f4a1fc6e9b5d97456272a Mon Sep 17 00:00:00 2001 From: Ton Voon Date: Fri, 2 Aug 2019 15:33:07 +0000 Subject: Allow mariadbclient to be used for check_mysql diff --git a/m4/np_mysqlclient.m4 b/m4/np_mysqlclient.m4 index c2a4d2a..5099a02 100644 --- a/m4/np_mysqlclient.m4 +++ b/m4/np_mysqlclient.m4 @@ -53,18 +53,34 @@ AC_DEFUN([np_mysqlclient], _savedcppflags="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $np_mysql_include" - dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in - dnl Although -lmysqlclient is duplicated, it is not a problem - AC_CHECK_LIB([mysqlclient], [mysql_init], [ - with_mysql=$np_mysql_config - AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) - ], [with_mysql=no], [$np_mysql_libs]) + np_check_lib_mysqlclient + CPPFLAGS=$_savedcppflags fi fi ]) +dnl Test mysql_init using mysqlclient +AC_DEFUN([np_check_lib_mysqlclient], +[ + dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in + dnl Although -lmysqlclient is duplicated, it is not a problem + AC_CHECK_LIB([mysqlclient], [mysql_init], [ + with_mysql=$np_mysql_config + AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) + ], [np_check_lib_mariadbclient], [$np_mysql_libs]) +]) + +dnl Test mysql_init using mariadbclient +AC_DEFUN([np_check_lib_mariadbclient], +[ + AC_CHECK_LIB([mariadbclient], [mysql_init], [ + with_mysql=$np_mysql_config + AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mariadbclient is found and can compile]) + ], [with_mysql=no], [$np_mysql_libs]) +]) + dnl Will take $1, find last occurrance of -LDIR and add DIR to LD_RUN_PATH AC_DEFUN([np_add_to_runpath], [ diff --git a/nagiosplug_mariadbclient.patch b/nagiosplug_mariadbclient.patch new file mode 100644 index 0000000..5248756 --- /dev/null +++ b/nagiosplug_mariadbclient.patch @@ -0,0 +1,45 @@ +diff --git a/m4/np_mysqlclient.m4 b/m4/np_mysqlclient.m4 +index c2a4d2a7..5099a02b 100644 +--- a/m4/np_mysqlclient.m4 ++++ b/m4/np_mysqlclient.m4 +@@ -53,18 +53,34 @@ AC_DEFUN([np_mysqlclient], + _savedcppflags="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $np_mysql_include" + +- dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in +- dnl Although -lmysqlclient is duplicated, it is not a problem +- AC_CHECK_LIB([mysqlclient], [mysql_init], [ +- with_mysql=$np_mysql_config +- AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) +- ], [with_mysql=no], [$np_mysql_libs]) ++ np_check_lib_mysqlclient ++ + CPPFLAGS=$_savedcppflags + + fi + fi + ]) + ++dnl Test mysql_init using mysqlclient ++AC_DEFUN([np_check_lib_mysqlclient], ++[ ++ dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in ++ dnl Although -lmysqlclient is duplicated, it is not a problem ++ AC_CHECK_LIB([mysqlclient], [mysql_init], [ ++ with_mysql=$np_mysql_config ++ AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) ++ ], [np_check_lib_mariadbclient], [$np_mysql_libs]) ++]) ++ ++dnl Test mysql_init using mariadbclient ++AC_DEFUN([np_check_lib_mariadbclient], ++[ ++ AC_CHECK_LIB([mariadbclient], [mysql_init], [ ++ with_mysql=$np_mysql_config ++ AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mariadbclient is found and can compile]) ++ ], [with_mysql=no], [$np_mysql_libs]) ++]) ++ + dnl Will take $1, find last occurrance of -LDIR and add DIR to LD_RUN_PATH + AC_DEFUN([np_add_to_runpath], + [ -- cgit v0.10-9-g596f From 5f4182f5da5ae6151eb960a0458571a88017df89 Mon Sep 17 00:00:00 2001 From: tonvoon Date: Mon, 12 Aug 2019 09:27:51 +0100 Subject: Delete nagiosplug_mariadbclient.patch diff --git a/nagiosplug_mariadbclient.patch b/nagiosplug_mariadbclient.patch deleted file mode 100644 index 5248756..0000000 --- a/nagiosplug_mariadbclient.patch +++ /dev/null @@ -1,45 +0,0 @@ -diff --git a/m4/np_mysqlclient.m4 b/m4/np_mysqlclient.m4 -index c2a4d2a7..5099a02b 100644 ---- a/m4/np_mysqlclient.m4 -+++ b/m4/np_mysqlclient.m4 -@@ -53,18 +53,34 @@ AC_DEFUN([np_mysqlclient], - _savedcppflags="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $np_mysql_include" - -- dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in -- dnl Although -lmysqlclient is duplicated, it is not a problem -- AC_CHECK_LIB([mysqlclient], [mysql_init], [ -- with_mysql=$np_mysql_config -- AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) -- ], [with_mysql=no], [$np_mysql_libs]) -+ np_check_lib_mysqlclient -+ - CPPFLAGS=$_savedcppflags - - fi - fi - ]) - -+dnl Test mysql_init using mysqlclient -+AC_DEFUN([np_check_lib_mysqlclient], -+[ -+ dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in -+ dnl Although -lmysqlclient is duplicated, it is not a problem -+ AC_CHECK_LIB([mysqlclient], [mysql_init], [ -+ with_mysql=$np_mysql_config -+ AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) -+ ], [np_check_lib_mariadbclient], [$np_mysql_libs]) -+]) -+ -+dnl Test mysql_init using mariadbclient -+AC_DEFUN([np_check_lib_mariadbclient], -+[ -+ AC_CHECK_LIB([mariadbclient], [mysql_init], [ -+ with_mysql=$np_mysql_config -+ AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mariadbclient is found and can compile]) -+ ], [with_mysql=no], [$np_mysql_libs]) -+]) -+ - dnl Will take $1, find last occurrance of -LDIR and add DIR to LD_RUN_PATH - AC_DEFUN([np_add_to_runpath], - [ -- cgit v0.10-9-g596f From 0d5fe4c35e96cd6fed9eed5aefb39d386cebcc93 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 11:19:32 +0200 Subject: remove obsolete AM_CONDITIONAL([WITH_CHECK_CURL]) diff --git a/configure.ac b/configure.ac index 4ce1409..267c40a 100644 --- a/configure.ac +++ b/configure.ac @@ -419,7 +419,6 @@ dnl prerequisites met, enable the plugin if test x$_can_enable_check_curl = xyes; then EXTRAS="$EXTRAS check_curl\$(EXEEXT)" fi -AM_CONDITIONAL([WITH_CHECK_CURL], [test "$_can_enable_check_curl" = "yes"]) AC_CONFIG_FILES([plugins/picohttpparser/Makefile]) dnl Fallback to who(1) if the system doesn't provide an utmpx(5) interface -- cgit v0.10-9-g596f From 4d666514f2290a5dffd60ba0c0e071e5e5626baa Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 11:20:13 +0200 Subject: setting progname of check_curl plugin to check_curl (at least for now) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 637e9ba..8d8cb9f 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -32,7 +32,7 @@ * * *****************************************************************************/ -const char *progname = "check_http"; +const char *progname = "check_curl"; const char *copyright = "2006-2018"; const char *email = "devel@monitoring-plugins.org"; -- cgit v0.10-9-g596f From c4d194bd2d1b350aa506f17644c5159a6130bc54 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 14:21:14 +0200 Subject: fixed whitespaces in REQUIREMENTS for check_curl to fit the rest of the requrirements diff --git a/REQUIREMENTS b/REQUIREMENTS index f04a3f0..f3b1c01 100644 --- a/REQUIREMENTS +++ b/REQUIREMENTS @@ -12,20 +12,20 @@ check_ldaps, check_http --ssl, check_tcp --ssl, check_smtp --starttls http://www.openssl.org, http://www.gnu.org/software/gnutls check_curl: - - Requires libcurl 7.15.2 or later - http://www.haxx.se - - --ssl/-S and -C requires OpenSSL for certificate checks, otherwise - libcurl must be quite new to support CURLINFO_CERTINFO with - GnuTLS and NSS libraries: - - 7.42.0 or newer for GnuTLS - - 7.34.0 or newer for NSS - GnuTLS is known to create problems on some distributions with - self-signed certificate chains + - Requires libcurl 7.15.2 or later + http://www.haxx.se + - --ssl/-S and -C requires OpenSSL for certificate checks, otherwise + libcurl must be quite new to support CURLINFO_CERTINFO with + GnuTLS and NSS libraries: + - 7.42.0 or newer for GnuTLS + - 7.34.0 or newer for NSS + GnuTLS is known to create problems on some distributions with + self-signed certificate chains http://www.openssl.org, http://www.gnu.org/software/gnutls, http://www.mozilla.org/projects/security/pki/nss/, other SSL implementations are currently not supported - - uriparser 0.7.5 or later - https://uriparser.github.io/ + - uriparser 0.7.5 or later + https://uriparser.github.io/ check_fping: - Requires the fping utility distributed with SATAN. Either -- cgit v0.10-9-g596f From fe91deb40c6ca7732c3548c75c0671f580d1c81b Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 14:22:00 +0200 Subject: check_curl: updates embedded picohttpparser to newest git version diff --git a/plugins/picohttpparser/picohttpparser.c b/plugins/picohttpparser/picohttpparser.c index 6a2d872..74ccc3e 100644 --- a/plugins/picohttpparser/picohttpparser.c +++ b/plugins/picohttpparser/picohttpparser.c @@ -36,8 +36,6 @@ #endif #include "picohttpparser.h" -/* $Id: a707070d11d499609f99d09f97535642cec910a8 $ */ - #if __GNUC__ >= 3 #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) @@ -73,9 +71,9 @@ #define ADVANCE_TOKEN(tok, toklen) \ do { \ const char *tok_start = buf; \ - static const char ALIGNED(16) ranges2[] = "\000\040\177\177"; \ + static const char ALIGNED(16) ranges2[16] = "\000\040\177\177"; \ int found2; \ - buf = findchar_fast(buf, buf_end, ranges2, sizeof(ranges2) - 1, &found2); \ + buf = findchar_fast(buf, buf_end, ranges2, 4, &found2); \ if (!found2) { \ CHECK_EOF(); \ } \ @@ -138,15 +136,11 @@ static const char *get_token_to_eol(const char *buf, const char *buf_end, const const char *token_start = buf; #ifdef __SSE4_2__ - static const char ranges1[] = "\0\010" - /* allow HT */ - "\012\037" - /* allow SP and up to but not including DEL */ - "\177\177" - /* allow chars w. MSB set */ - ; + static const char ALIGNED(16) ranges1[16] = "\0\010" /* allow HT */ + "\012\037" /* allow SP and up to but not including DEL */ + "\177\177"; /* allow chars w. MSB set */ int found; - buf = findchar_fast(buf, buf_end, ranges1, sizeof(ranges1) - 1, &found); + buf = findchar_fast(buf, buf_end, ranges1, 6, &found); if (found) goto FOUND_CTL; #else @@ -325,9 +319,21 @@ static const char *parse_headers(const char *buf, const char *buf_end, struct ph headers[*num_headers].name = NULL; headers[*num_headers].name_len = 0; } - if ((buf = get_token_to_eol(buf, buf_end, &headers[*num_headers].value, &headers[*num_headers].value_len, ret)) == NULL) { + const char *value; + size_t value_len; + if ((buf = get_token_to_eol(buf, buf_end, &value, &value_len, ret)) == NULL) { return NULL; } + /* remove trailing SPs and HTABs */ + const char *value_end = value + value_len; + for (; value_end != value; --value_end) { + const char c = *(value_end - 1); + if (!(c == ' ' || c == '\t')) { + break; + } + } + headers[*num_headers].value = value; + headers[*num_headers].value_len = value_end - value; } return buf; } @@ -347,9 +353,17 @@ static const char *parse_request(const char *buf, const char *buf_end, const cha /* parse request line */ ADVANCE_TOKEN(*method, *method_len); - ++buf; + do { + ++buf; + } while (*buf == ' '); ADVANCE_TOKEN(*path, *path_len); - ++buf; + do { + ++buf; + } while (*buf == ' '); + if (*method_len == 0 || *path_len == 0) { + *ret = -1; + return NULL; + } if ((buf = parse_http_version(buf, buf_end, minor_version, ret)) == NULL) { return NULL; } @@ -402,10 +416,13 @@ static const char *parse_response(const char *buf, const char *buf_end, int *min return NULL; } /* skip space */ - if (*buf++ != ' ') { + if (*buf != ' ') { *ret = -1; return NULL; } + do { + ++buf; + } while (*buf == ' '); /* parse status code, we want at least [:digit:][:digit:][:digit:] to try to parse */ if (buf_end - buf < 4) { *ret = -2; @@ -413,13 +430,21 @@ static const char *parse_response(const char *buf, const char *buf_end, int *min } PARSE_INT_3(status); - /* skip space */ - if (*buf++ != ' ') { - *ret = -1; + /* get message includig preceding space */ + if ((buf = get_token_to_eol(buf, buf_end, msg, msg_len, ret)) == NULL) { return NULL; } - /* get message */ - if ((buf = get_token_to_eol(buf, buf_end, msg, msg_len, ret)) == NULL) { + if (*msg_len == 0) { + /* ok */ + } else if (**msg == ' ') { + /* remove preceding space */ + do { + ++*msg; + --*msg_len; + } while (**msg == ' '); + } else { + /* garbage found after status code */ + *ret = -1; return NULL; } diff --git a/plugins/picohttpparser/picohttpparser.h b/plugins/picohttpparser/picohttpparser.h index a8fad71..0849f84 100644 --- a/plugins/picohttpparser/picohttpparser.h +++ b/plugins/picohttpparser/picohttpparser.h @@ -33,8 +33,6 @@ #define ssize_t intptr_t #endif -/* $Id: 67fd3ee74103ada60258d8a16e868f483abcca87 $ */ - #ifdef __cplusplus extern "C" { #endif -- cgit v0.10-9-g596f From 95ee6ace094109d156286ab61d3c76709e43d642 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 15:31:15 +0200 Subject: improved curlhelp_parse_statusline to handle both HTTP/1.x and HTTP/2 diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8d8cb9f..3a6f2af 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -59,7 +59,7 @@ const char *email = "devel@monitoring-plugins.org"; #define DEFAULT_BUFFER_SIZE 2048 #define DEFAULT_SERVER_URL "/" -#define HTTP_EXPECT "HTTP/1." +#define HTTP_EXPECT "HTTP/" #define DEFAULT_MAX_REDIRS 15 #define INET_ADDR_MAX_SIZE INET6_ADDRSTRLEN enum { @@ -1915,44 +1915,55 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) status_line->first_line[first_line_len] = '\0'; first_line_buf = strdup( status_line->first_line ); - /* protocol and version: "HTTP/x.x" SP */ + /* protocol and version: "HTTP/x.x" SP or "HTTP/2" SP */ p = strtok(first_line_buf, "/"); if( p == NULL ) { free( first_line_buf ); return -1; } if( strcmp( p, "HTTP" ) != 0 ) { free( first_line_buf ); return -1; } - p = strtok( NULL, "." ); - if( p == NULL ) { free( first_line_buf ); return -1; } - status_line->http_major = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( first_line_buf ); return -1; } - p = strtok( NULL, " " ); if( p == NULL ) { free( first_line_buf ); return -1; } - status_line->http_minor = (int)strtol( p, &pp, 10 ); - if( *pp != '\0' ) { free( first_line_buf ); return -1; } + if( strchr( p, '.' ) != NULL ) { + + /* HTTP 1.x case */ + char *ppp; + ppp = strtok( p, "." ); + status_line->http_major = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( first_line_buf ); return -1; } + ppp = strtok( NULL, " " ); + status_line->http_minor = (int)strtol( p, &pp, 10 ); + if( *pp != '\0' ) { free( first_line_buf ); return -1; } + p += 4; /* 1.x SP */ + } else { + /* HTTP 2 case */ + status_line->http_major = (int)strtol( p, &pp, 10 ); + status_line->http_minor = 0; + p += 2; /* 2 SP */ + } /* status code: "404" or "404.1", then SP */ - p = strtok( NULL, " ." ); + p = strtok( p, " " ); if( p == NULL ) { free( first_line_buf ); return -1; } if( strchr( p, '.' ) != NULL ) { char *ppp; ppp = strtok( p, "." ); status_line->http_code = (int)strtol( ppp, &pp, 10 ); if( *pp != '\0' ) { free( first_line_buf ); return -1; } - ppp = strtok( NULL, "" ); status_line->http_subcode = (int)strtol( ppp, &pp, 10 ); if( *pp != '\0' ) { free( first_line_buf ); return -1; } + p += 6; /* 400.1 SP */ } else { status_line->http_code = (int)strtol( p, &pp, 10 ); status_line->http_subcode = -1; if( *pp != '\0' ) { free( first_line_buf ); return -1; } + p += 4; /* 400 SP */ } /* Human readable message: "Not Found" CRLF */ - p = strtok( NULL, "" ); + p = strtok( p, "" ); if( p == NULL ) { status_line->msg = ""; return 0; } status_line->msg = status_line->first_line + ( p - first_line_buf ); free( first_line_buf ); -- cgit v0.10-9-g596f From f546041722b279d947f75523c52bd779ca6344dc Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 15:58:09 +0200 Subject: added --http-version option to check_curl to choose HTTP version diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3a6f2af..7f1f64c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -203,6 +203,7 @@ int no_body = FALSE; int maximum_age = -1; int address_family = AF_UNSPEC; curlhelp_ssl_library ssl_library = CURLHELP_SSL_LIBRARY_UNKNOWN; +int curl_http_version = CURL_HTTP_VERSION_NONE; int process_arguments (int, char**); void handle_curl_option_return_code (CURLcode res, const char* option); @@ -386,6 +387,9 @@ check_http (void) http_method = "GET"; handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, server_url), "CURLOPT_URL"); } + + /* set HTTP protocol version */ + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_HTTP_VERSION, curl_http_version), "CURLOPT_HTTP_VERSION"); /* set HTTP method */ if (http_method) { @@ -1085,7 +1089,8 @@ process_arguments (int argc, char **argv) enum { INVERT_REGEX = CHAR_MAX + 1, SNI_OPTION, - CA_CERT_OPTION + CA_CERT_OPTION, + HTTP_VERSION_OPTION }; int option = 0; @@ -1125,6 +1130,7 @@ process_arguments (int argc, char **argv) {"use-ipv4", no_argument, 0, '4'}, {"use-ipv6", no_argument, 0, '6'}, {"extended-perfdata", no_argument, 0, 'E'}, + {"http-version", required_argument, 0, HTTP_VERSION_OPTION}, {0, 0, 0, 0} }; @@ -1491,6 +1497,19 @@ process_arguments (int argc, char **argv) case 'E': /* show extended perfdata */ show_extended_perfdata = TRUE; break; + case HTTP_VERSION_OPTION: + curl_http_version = CURL_HTTP_VERSION_NONE; + if (strcmp (optarg, "1.0") == 0) { + curl_http_version = CURL_HTTP_VERSION_1_0; + } else if (strcmp (optarg, "1.1") == 0) { + curl_http_version = CURL_HTTP_VERSION_1_1; + } else if (strcmp (optarg, "2") == 0) { + curl_http_version = CURL_HTTP_VERSION_2_0; + } else { + fprintf (stderr, "unkown http-version parameter: %s\n", optarg); + exit (STATE_WARNING); + } + break; case '?': /* print short usage statement if args not parsable */ usage5 (); @@ -1693,6 +1712,11 @@ print_help (void) printf (" %s\n", _("curl uses CURL_FOLLOWLOCATION built into libcurl.")); printf (" %s\n", "-m, --pagesize=INTEGER<:INTEGER>"); printf (" %s\n", _("Minimum page size required (bytes) : Maximum page size required (bytes)")); + printf ("\n"); + printf (" %s\n", "--http-version=VERSION"); + printf (" %s\n", _("Connect via specific HTTP protocol.")); + printf (" %s\n", _("1.0 = HTTP/1.0, 1.1 = HTTP/1.1, 2.0 = HTTP/2 (HTTP/2 will fail without -S)")); + printf ("\n"); printf (UT_WARN_CRIT); @@ -1776,6 +1800,7 @@ print_usage (void) printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); printf (" [-T ] [-j method]\n"); + printf (" [--http-version=]\n"); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); -- cgit v0.10-9-g596f From 04c58e021097d0dda4d5ebbb3c2f96e45e50ffd4 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sat, 7 Sep 2019 16:06:17 +0200 Subject: some LIBCURL_VERSION checks around HTTP/2 feature diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 7f1f64c..9dea9c4 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1503,8 +1503,12 @@ process_arguments (int argc, char **argv) curl_http_version = CURL_HTTP_VERSION_1_0; } else if (strcmp (optarg, "1.1") == 0) { curl_http_version = CURL_HTTP_VERSION_1_1; - } else if (strcmp (optarg, "2") == 0) { + } else if ((strcmp (optarg, "2.0") == 0) || (strcmp (optarg, "2") == 0)) { +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 33, 0) curl_http_version = CURL_HTTP_VERSION_2_0; +#else + curl_http_version = CURL_HTTP_VERSION_NONE; +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 33, 0) */ } else { fprintf (stderr, "unkown http-version parameter: %s\n", optarg); exit (STATE_WARNING); -- cgit v0.10-9-g596f From ede43c848d5ea8cb1d7fb23af1d638e6fff9aa41 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Fri, 11 Oct 2019 17:22:34 +0200 Subject: setting no_body to TRUE when we have a HEAD request diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 9dea9c4..69b6344 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -387,6 +387,11 @@ check_http (void) http_method = "GET"; handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_URL, server_url), "CURLOPT_URL"); } + + /* disable body for HEAD request */ + if (http_method && !strcmp (http_method, "HEAD" )) { + no_body = TRUE; + } /* set HTTP protocol version */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_HTTP_VERSION, curl_http_version), "CURLOPT_HTTP_VERSION"); @@ -627,7 +632,7 @@ check_http (void) server_port, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } - + /* certificate checks */ #ifdef LIBCURL_FEATURE_SSL if (use_ssl == TRUE) { -- cgit v0.10-9-g596f From f7efee5f9c590ee0bea65d56697903cbf26d24c5 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 7 Nov 2019 08:20:17 +0000 Subject: check_curl: more tolerant CN= parsing when checking certificates (hit on Centos 8) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 69b6344..796c55f 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -2215,13 +2215,20 @@ net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_war for (i = 0; i < cert_ptr->to_certinfo->num_of_certs; i++) { for (slist = cert_ptr->to_certinfo->certinfo[i]; slist; slist = slist->next) { - /* find first common name in subject, TODO: check alternative subjects for + /* find first common name in subject, + * TODO: check alternative subjects for + * TODO: have a decent parser here and not a hack * multi-host certificate, check wildcards */ if (strncasecmp (slist->data, "Subject:", 8) == 0) { + int d = 3; char* p = strstr (slist->data, "CN="); + if (p == NULL) { + d = 5; + p = strstr (slist->data, "CN = "); + } if (p != NULL) { - if (strncmp (host_name, p+3, strlen (host_name)) == 0) { + if (strncmp (host_name, p+d, strlen (host_name)) == 0) { cname_found = 1; } } -- cgit v0.10-9-g596f From 1b689dab5e64d4dfb76b81434cd5c4d50e988442 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 7 Nov 2019 15:31:52 +0000 Subject: check_curl: NSS, parse more date formats from certificate (in -C cert check) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 796c55f..5b6564c 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -2181,10 +2181,14 @@ parse_cert_date (const char *s) { struct tm tm; time_t date; + char *res; if (!s) return -1; - strptime (s, "%Y-%m-%d %H:%M:%S GMT", &tm); + /* Jan 17 14:25:12 2020 GMT */ + res = strptime (s, "%Y-%m-%d %H:%M:%S GMT", &tm); + /* Sep 11 12:00:00 2020 GMT */ + if (res == NULL) strptime (s, "%Y %m %d %H:%M:%S GMT", &tm); date = mktime (&tm); return date; -- cgit v0.10-9-g596f From 7693af147926d0eb7369a43070d114b6bd79dc70 Mon Sep 17 00:00:00 2001 From: datamuc Date: Thu, 28 Nov 2019 06:44:59 +0100 Subject: simplify documentation "first" + "second to last" is every line right? diff --git a/doc/developer-guidelines.sgml b/doc/developer-guidelines.sgml index 6f31f36..5f480c5 100644 --- a/doc/developer-guidelines.sgml +++ b/doc/developer-guidelines.sgml @@ -324,8 +324,8 @@
Performance data - Nagios 3 and newer will concatenate the parts following a "|" in a) the first - line output by the plugin, and b) in the second to last line, into a string it + Nagios 3 and newer will concatenate the parts following a "|" in + each line of output by the plugin into a string it passes to whatever performance data processing it has configured. (Note that it currently does not insert additional whitespace between both, so the plugin needs to provide some to prevent the last pair of a) and the first of b) getting run -- cgit v0.10-9-g596f From 5e0c236d6a3499f08b16a2ddb5147393e9dbd27a Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 29 Dec 2019 10:23:02 +0000 Subject: increased copyright diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 5b6564c..7aae920 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -3,7 +3,7 @@ * Monitoring check_curl plugin * * License: GPL -* Copyright (c) 1999-2018 Monitoring Plugins Development Team +* Copyright (c) 1999-2019 Monitoring Plugins Development Team * * Description: * @@ -34,7 +34,7 @@ *****************************************************************************/ const char *progname = "check_curl"; -const char *copyright = "2006-2018"; +const char *copyright = "2006-2019"; const char *email = "devel@monitoring-plugins.org"; #include -- cgit v0.10-9-g596f From 9da7cd76813870632ff93659d176ead0848b8ee9 Mon Sep 17 00:00:00 2001 From: Christian Tacke <8560110+ChristianTacke@users.noreply.github.com> Date: Wed, 25 Dec 2019 21:41:17 +0100 Subject: Fix timeout_interval declarations There are different declarations for timeout_interval: lib/utils_base.c has the definition: unsigned int timeout_interval = DEFAULT_SOCKET_TIMEOUT; lib/utils_base.h has the appropiate declaration: extern unsigned int timeout_interval; plugins/popen.h has an extra declaration: extern unsigned int timeout_interval; This doesn't hurt, but it's a dupe. The one in utils_base.h should be enough, so remove this one. plugins/popen.c has a WRONG one: extern int timeout_interval; Remove it! Use #include "utils.h" to get the right one. This makes the local defines for max/min unnecassary, so remove them also. diff --git a/plugins/popen.c b/plugins/popen.c index 557fb44..9eb49b6 100644 --- a/plugins/popen.c +++ b/plugins/popen.c @@ -39,9 +39,9 @@ *****************************************************************************/ #include "common.h" +#include "utils.h" /* extern so plugin has pid to kill exec'd process on timeouts */ -extern int timeout_interval; extern pid_t *childpid; extern int *child_stderr_array; extern FILE *child_process; @@ -76,8 +76,6 @@ RETSIGTYPE popen_timeout_alarm_handler (int); #define SIG_ERR ((Sigfunc *)-1) #endif -#define min(a,b) ((a) < (b) ? (a) : (b)) -#define max(a,b) ((a) > (b) ? (a) : (b)) char *pname = NULL; /* caller can set this from argv[0] */ diff --git a/plugins/popen.h b/plugins/popen.h index fc7e78e..a5dd8fa 100644 --- a/plugins/popen.h +++ b/plugins/popen.h @@ -7,7 +7,6 @@ FILE *spopen (const char *); int spclose (FILE *); RETSIGTYPE popen_timeout_alarm_handler (int); -extern unsigned int timeout_interval; pid_t *childpid=NULL; int *child_stderr_array=NULL; FILE *child_process=NULL; -- cgit v0.10-9-g596f From f53ea7afd8e124690871ebdb79a1432e4dd14488 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Tue, 7 Jan 2020 20:57:24 +0100 Subject: check_tcp: add --sni diff --git a/plugins/check_tcp.c b/plugins/check_tcp.c index 61333bd..1365b9c 100644 --- a/plugins/check_tcp.c +++ b/plugins/check_tcp.c @@ -86,6 +86,11 @@ static char buffer[MAXBUF]; static int expect_mismatch_state = STATE_WARNING; static int match_flags = NP_MATCH_EXACT; +#ifdef HAVE_SSL +static char *sni = NULL; +static int sni_specified = FALSE; +#endif + #define FLAG_SSL 0x01 #define FLAG_VERBOSE 0x02 #define FLAG_TIME_WARN 0x04 @@ -241,7 +246,7 @@ main (int argc, char **argv) #ifdef HAVE_SSL if (flags & FLAG_SSL){ - result = np_net_ssl_init(sd); + result = np_net_ssl_init_with_hostname(sd, (sni_specified ? sni : NULL)); if (result == STATE_OK && check_cert == TRUE) { result = np_net_ssl_check_cert(days_till_exp_warn, days_till_exp_crit); } @@ -401,6 +406,10 @@ process_arguments (int argc, char **argv) int escape = 0; char *temp; + enum { + SNI_OPTION = CHAR_MAX + 1 + }; + int option = 0; static struct option longopts[] = { {"hostname", required_argument, 0, 'H'}, @@ -427,6 +436,7 @@ process_arguments (int argc, char **argv) {"version", no_argument, 0, 'V'}, {"help", no_argument, 0, 'h'}, {"ssl", no_argument, 0, 'S'}, + {"sni", required_argument, 0, SNI_OPTION}, {"certificate", required_argument, 0, 'D'}, {0, 0, 0, 0} }; @@ -604,6 +614,15 @@ process_arguments (int argc, char **argv) die (STATE_UNKNOWN, _("Invalid option - SSL is not available")); #endif break; + case SNI_OPTION: +#ifdef HAVE_SSL + flags |= FLAG_SSL; + sni_specified = TRUE; + sni = optarg; +#else + die (STATE_UNKNOWN, _("Invalid option - SSL is not available")); +#endif + break; case 'A': match_flags |= NP_MATCH_ALL; break; @@ -671,6 +690,8 @@ print_help (void) printf (" %s\n", _("1st is #days for warning, 2nd is critical (if not specified - 0).")); printf (" %s\n", "-S, --ssl"); printf (" %s\n", _("Use SSL for the connection.")); + printf (" %s\n", "--sni=STRING"); + printf (" %s\n", _("SSL server_name")); #endif printf (UT_WARN_CRIT); -- cgit v0.10-9-g596f From 60ec4d29019c553451d828fe366c8acc46fc8162 Mon Sep 17 00:00:00 2001 From: Vadim Zhukov Date: Wed, 19 Jul 2017 13:55:08 +0300 Subject: Use size_t instead of int when calling sysctl(3). Otherwise, it writes sizeof(size_t) bytes to &oldlen, smashing the stack. diff --git a/plugins-root/check_dhcp.c b/plugins-root/check_dhcp.c index f4c2daf..ad67323 100644 --- a/plugins-root/check_dhcp.c +++ b/plugins-root/check_dhcp.c @@ -323,7 +323,8 @@ int get_hardware_address(int sock,char *interface_name){ #elif defined(__bsd__) /* King 2004 see ACKNOWLEDGEMENTS */ - int mib[6], len; + size_t len; + int mib[6]; char *buf; unsigned char *ptr; struct if_msghdr *ifm; -- cgit v0.10-9-g596f From d008be68255b192f0354c523938c40643e39795f Mon Sep 17 00:00:00 2001 From: DaTa Date: Thu, 30 Jan 2020 10:48:45 +0100 Subject: Revert "simplify documentation" This reverts commit 7693af147926d0eb7369a43070d114b6bd79dc70. Now it is wrong: After reading https://www.naemon.org/documentation/usersguide/pluginapi.html#plugin_output_spec the old wording makes more sense. diff --git a/doc/developer-guidelines.sgml b/doc/developer-guidelines.sgml index 5f480c5..6f31f36 100644 --- a/doc/developer-guidelines.sgml +++ b/doc/developer-guidelines.sgml @@ -324,8 +324,8 @@
Performance data - Nagios 3 and newer will concatenate the parts following a "|" in - each line of output by the plugin into a string it + Nagios 3 and newer will concatenate the parts following a "|" in a) the first + line output by the plugin, and b) in the second to last line, into a string it passes to whatever performance data processing it has configured. (Note that it currently does not insert additional whitespace between both, so the plugin needs to provide some to prevent the last pair of a) and the first of b) getting run -- cgit v0.10-9-g596f From 4264e7a6edb651793ef751723537767656a89e44 Mon Sep 17 00:00:00 2001 From: ghciv6 Date: Mon, 13 Apr 2020 20:44:26 +0200 Subject: - workaround for issue #1550 - better use "ping -4" instead of "ping" if supported diff --git a/configure.ac b/configure.ac index 08a0e78..4a9a92a 100644 --- a/configure.ac +++ b/configure.ac @@ -1064,6 +1064,14 @@ then ac_cv_ping_packets_first=yes AC_MSG_RESULT([$with_ping_command]) +elif $PATH_TO_PING -4 -n -U -w 10 -c 1 127.0.0.1 2>/dev/null | \ + egrep -i "^round-trip|^rtt" >/dev/null +then + # check if -4 is supported - issue #1550 + with_ping_command="$PATH_TO_PING -4 -n -U -w %d -c %d %s" + ac_cv_ping_packets_first=yes + ac_cv_ping_has_timeout=yes + AC_MSG_RESULT([$with_ping_command]) elif $PATH_TO_PING -n -U -w 10 -c 1 127.0.0.1 2>/dev/null | \ egrep -i "^round-trip|^rtt" >/dev/null then -- cgit v0.10-9-g596f From b12358535458b853d287551054331e477b58320a Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Fri, 15 May 2020 13:33:48 +0200 Subject: tests: update expired test certificate the certificate used to test expired http checks is to old to be used with recent ssl libraries and results in: > SSL routines:SSL_CTX_use_certificate:ee key too small unfortunatly the error is only visible when setting $IO::Socket::SSL::DEBUG in the check_http.t file. diff --git a/plugins/tests/certs/expired-cert.pem b/plugins/tests/certs/expired-cert.pem index 40324cf..77a9166 100644 --- a/plugins/tests/certs/expired-cert.pem +++ b/plugins/tests/certs/expired-cert.pem @@ -1,21 +1,24 @@ -----BEGIN CERTIFICATE----- -MIIDYzCCAsygAwIBAgIJAJISzcX71f5pMA0GCSqGSIb3DQEBBAUAMH8xCzAJBgNV -BAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIxFzAV -BgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwGCSqG -SIb3DQEJARYPdG9udm9vbkBtYWMuY29tMB4XDTA5MDMwNjAwMTMxNVoXDTA5MDMw -NTAwMTMxNlowfzELMAkGA1UEBhMCVUsxEzARBgNVBAgTCkRlcmJ5c2hpcmUxDzAN -BgNVBAcTBkJlbHBlcjEXMBUGA1UEChMOTmFnaW9zIFBsdWdpbnMxETAPBgNVBAMT -CFRvbiBWb29uMR4wHAYJKoZIhvcNAQkBFg90b252b29uQG1hYy5jb20wgZ8wDQYJ -KoZIhvcNAQEBBQADgY0AMIGJAoGBAOQHP4JnzACi4q6quXAiK+gTSffG6yyjEV+K -iyutRgBF2MdF03X5ls0wENw/5fnMTrHynl4XoGoV/rD4CR2hGT0m7dv7Vu0MRLlP -J1SCiFeMuQS30zzLMJr0A7IW869qRlKQmzxs1JT6XDbSoNQuF154zoxwNsKlMjoX -tJSHN2YpAgMBAAGjgeYwgeMwHQYDVR0OBBYEFHWjM9OQldrDLMcAfPnUVfGxlzOp -MIGzBgNVHSMEgaswgaiAFHWjM9OQldrDLMcAfPnUVfGxlzOpoYGEpIGBMH8xCzAJ -BgNVBAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIx -FzAVBgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwG -CSqGSIb3DQEJARYPdG9udm9vbkBtYWMuY29tggkAkhLNxfvV/mkwDAYDVR0TBAUw -AwEB/zANBgkqhkiG9w0BAQQFAAOBgQDHjoXoGwBamCiNplTt93jH/TO08RATdZP5 -45hlxv2+PKCjjTiFa2mjAvopFiqmYsr40XYEmpeYMiaOzOW5rBjtqBAT/JJWyfda -SCmj3swqyKus63rv/iuokIhZzBdhbB+eOJJrmwT2SEc5KdRaipH0QAGF1nZAAGzo -6xW7hkzYog== +MIIEETCCAvmgAwIBAgIUFDsP6WnV/uqeQMpD/DYSqouE13kwDQYJKoZIhvcNAQEL +BQAwgZcxCzAJBgNVBAYTAkRFMRAwDgYDVQQIDAdCYXZhcmlhMQ8wDQYDVQQHDAZN +dW5pY2gxGzAZBgNVBAoMEk1vbml0b3JpbmcgUGx1Z2luczEbMBkGA1UEAwwSTW9u +aXRvcmluZyBQbHVnaW5zMSswKQYJKoZIhvcNAQkBFhxkZXZlbEBtb25pdG9yaW5n +LXBsdWdpbnMub3JnMB4XDTA4MDEwMTExMDAyNloXDTA4MDEwMjExMDAyNlowgZcx +CzAJBgNVBAYTAkRFMRAwDgYDVQQIDAdCYXZhcmlhMQ8wDQYDVQQHDAZNdW5pY2gx +GzAZBgNVBAoMEk1vbml0b3JpbmcgUGx1Z2luczEbMBkGA1UEAwwSTW9uaXRvcmlu +ZyBQbHVnaW5zMSswKQYJKoZIhvcNAQkBFhxkZXZlbEBtb25pdG9yaW5nLXBsdWdp +bnMub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyeHKwKFjJWUX +YHKsisypUf9dHlIPQAISyGP1BX6UL26ZLvE6kKbx3LFQ9W2POGoQWlzFiB1soGeV +WDd0U0JtWdCKmOXWdcXpupQlTSUtRCMDQkfqLN8GR5TBTd73rezp5mz08nMfLwu0 +p5VQ191Ui8JHFgrAOalAn8Uw5De8vj4VmTXmU5NJ2UFoC0ddU/Th/lwRCayHc1cn +MVq2F7c/uhMUUQYNBmJy0pxoHawp+j9NKl/xIYsjgQNgahQyNuswuGHjaEwhPu+7 +G03XsW4ehu+H1898M/MkSln6LQAU1syoJ8ypPM8tV+zgx4uwj7udnZ2hceN95uW7 +0PWg5DQyUwIDAQABo1MwUTAdBgNVHQ4EFgQUt9ps3KJ1XiMuy/ijFBjMzf6jgwkw +HwYDVR0jBBgwFoAUt9ps3KJ1XiMuy/ijFBjMzf6jgwkwDwYDVR0TAQH/BAUwAwEB +/zANBgkqhkiG9w0BAQsFAAOCAQEAVPBZwMHbrnHFbmhbcPuvYd5cxk0uSVNAUzsl +2biCq5P+ZHo10VHGygXtdV4utqk/IrAt2u5qSxycWPStCtAgTd3Q8ncfjOkaHM4z +2bxTkhLyQeU8NWPuDBqDszo2GOaFTv+lm36LEKiAfqB1tjQVePSkycdrWIhkamBV +EgMe6uHLdU7QQk1ajQfrBdakN1beqki/dKieA6gm+XF/QS4SSYINmsHB/2X5cT9U +b/KMB8xurCnuJQuk1P4VsSkJCOSeHjWZgK9pKNdsIJZr4wDVfhjQgU0XT6xakSf7 +eCaHtO0VKsbLZoiTmpxidjsdYiXyeKYIQNtUpTjyJ5V/cZsq9w== -----END CERTIFICATE----- diff --git a/plugins/tests/certs/expired-key.pem b/plugins/tests/certs/expired-key.pem index af0e24d..c1510b2 100644 --- a/plugins/tests/certs/expired-key.pem +++ b/plugins/tests/certs/expired-key.pem @@ -1,15 +1,28 @@ ------BEGIN RSA PRIVATE KEY----- -MIICXAIBAAKBgQDkBz+CZ8wAouKuqrlwIivoE0n3xussoxFfiosrrUYARdjHRdN1 -+ZbNMBDcP+X5zE6x8p5eF6BqFf6w+AkdoRk9Ju3b+1btDES5TydUgohXjLkEt9M8 -yzCa9AOyFvOvakZSkJs8bNSU+lw20qDULhdeeM6McDbCpTI6F7SUhzdmKQIDAQAB -AoGARgI3rHjjuDpKMGg4IMZNBqaNaiZHY9/44IVvrww21rSbFqtIfgsQEpU0R/rS -R7xDWPztRGQqmwd/t6OfYNpqHbjO1MWzasVBVnzue5P59Y1xy1h0LZF8+a9GY++0 -uAGUC24jsXSmypNVzoX+ZKyinA3oYV/etdPYx1W8Ms5XIzUCQQD7xwhMuLok6Kbq -UEgiSfBTbx+haP3IiqqMF14z8QoEyD3jchydNaXEYdQxN8jEl2aPrMqTc6x8Jq4/ -ai0OkB+fAkEA59pAmN81HylV7+CsVjLOSbJqzau7NDxSs2uutxhHZRwz0e25wVer -fA03l08u0ebC/TDHkmHV6ikCryM5HU2FNwJAVZJFzd2S1myEHmr+uTisB49jDrbi -WkBWypo+mCS6JPnxntXvx7auClq9haTSBY73eqldiFPuMZvr6P2rJqHxPQJBAOTM -quaxjti7kATy8N73sD9mBKQGju1TgkFxSK+DFCGhnTnToXY9MAtxd6SoDYoyccYu -dyPrzJAR/IYc+mYCdC0CQDKlZuMPVXEgvGaQapzMQ++5yJRvMZF4tWvONBs0OCE9 -QYarsTi5M20cymMBXHOLZIjqwsni4G/C9kqJSvC75Vg= ------END RSA PRIVATE KEY----- +-----BEGIN PRIVATE KEY----- +MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQDJ4crAoWMlZRdg +cqyKzKlR/10eUg9AAhLIY/UFfpQvbpku8TqQpvHcsVD1bY84ahBaXMWIHWygZ5VY +N3RTQm1Z0IqY5dZ1xem6lCVNJS1EIwNCR+os3wZHlMFN3vet7OnmbPTycx8vC7Sn +lVDX3VSLwkcWCsA5qUCfxTDkN7y+PhWZNeZTk0nZQWgLR11T9OH+XBEJrIdzVycx +WrYXtz+6ExRRBg0GYnLSnGgdrCn6P00qX/EhiyOBA2BqFDI26zC4YeNoTCE+77sb +Tdexbh6G74fXz3wz8yRKWfotABTWzKgnzKk8zy1X7ODHi7CPu52dnaFx433m5bvQ +9aDkNDJTAgMBAAECggEACrLFfNnQmD24NGs/S4e2/VpsA9xTZI/3kNkDNgxULANP +aNZtxRajwI9A/BCXQ2UTgsZhzWnJxOJYXrlpl7PweY78mUesysb3MOUC6QisUm0M +kimfdktHWOnAKLFFLNleN9DUVjjVkTeslijqhNX80f80py1grG2UuCLKCX4OqYIm +qACE8TMmSZLz42AO96TndNtKplQ8LuGLEmByW95wEfhx3Gm4ckkL7qII/U3DnQXr +0T+3xLaj+eNJzYDpIFZiw4sNzOuAyCz+4Cc4sPDuMnzquXF+enpkemoycC1RmEpG +KIDTwmFsc8TrbGV0qifC6fsCrDivdYLqL7R/q3IBQQKBgQDmfvO3VYTEKY8NA+AT +5s6+7NTxRsXxJUCEhCNBWimSH3EzmBAvrodLY6A0oYg8i81bgNX1I9GPVXJZ/QA7 +ukd84HUIQoGS5Usmo4rp+kz4P6KkLXDemZtWPU5GXxicfajHRQlkbW6St6SpV7IS +ibJcDADeoiaPL1xvue1ToP/LoQKBgQDgOFHjYpep00gabvjXfYW7vhrg1vVwaKUM +rf0+UW8Exk4nbBw0eEC2YjxIwzdktlkdbzGaXYULnhg8GnfxYesMOpCLPw1JdB8o +ixETAFpW5bKrUsjEFRUGhzWnsCSFIQ4smpmtGLTxOQ8AkoDdORY5Z+Wv7JtFF6Do +PSoblckZcwKBgB3TD3YJesRnHDty5OuuUdIikuslXTd2uoJrFqS+JeLibqNeabnB +u3/lxDULMbWj4U6VvRmbKOKDC+jY887Gq7lc0cff0yROxwqY3sCnwo3crg7QUmp7 +Nb5S8G3qoCSfndcq96wm/Me/O28uCbycVJfUdchY8uRUHIHYbP0FOBQBAoGBAMgh +fPX4imaKr1DovDObVkK87EDDnU84GBm5MtDs3qrkVd3aIVK0Aw7HoAdSN58tI12i +YiPmVVqJQhhjh6tsOuAvZdTj8ngdrbICbrsHFZt6an+A5LIgHyQ0iy+hiPdLCdvG +ImTeKKMmyr04Bs1upueWVO0xw2VoMbcY4Py+NUEBAoGASQqedfCSKGLT+5lLZrhP +CbFVMmswEPjBcRb1trcuA09vfExn9FfUNFnnw3i9miprED5kufvAjb+6nduXizKg +7HQYHCwVvakgtXgbiDMaNgYZcjWm+MdnfiwLJjJTO3DfI1JF2PJ8y9R95DPlAkDm +xH3OV8KV4UiTEVxS7ksmGzY= +-----END PRIVATE KEY----- diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index 006f133..bfecff2 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -4,6 +4,8 @@ # # To create the https server certificate: # openssl req -new -x509 -keyout server-key.pem -out server-cert.pem -days 3650 -nodes +# to create a new expired certificate: +# faketime '2008-01-01 12:00:00' openssl req -new -x509 -keyout expired-key.pem -out expired-cert.pem -days 1 -nodes # Country Name (2 letter code) [AU]:DE # State or Province Name (full name) [Some-State]:Bavaria # Locality Name (eg, city) []:Munich @@ -208,7 +210,7 @@ SKIP: { $result = NPTest->testCmd( "$command -p $port_https_expired -S -C 7" ); is( $result->return_code, 2, "$command -p $port_https_expired -S -C 7" ); is( $result->output, - 'CRITICAL - Certificate \'Ton Voon\' expired on Thu Mar 5 00:13:16 2009 +0000.', + 'CRITICAL - Certificate \'Monitoring Plugins\' expired on Wed Jan 2 11:00:26 2008 +0000.', "output ok" ); } -- cgit v0.10-9-g596f From 072e97d5de3f147aef1eae41222385352fb8df73 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Fri, 15 May 2020 13:33:48 +0200 Subject: tests: update expired test certificate the certificate used to test expired http checks is to old to be used with recent ssl libraries and results in: > SSL routines:SSL_CTX_use_certificate:ee key too small unfortunatly the error is only visible when setting $IO::Socket::SSL::DEBUG in the check_http.t file. diff --git a/plugins/tests/certs/expired-cert.pem b/plugins/tests/certs/expired-cert.pem index 40324cf..77a9166 100644 --- a/plugins/tests/certs/expired-cert.pem +++ b/plugins/tests/certs/expired-cert.pem @@ -1,21 +1,24 @@ -----BEGIN CERTIFICATE----- -MIIDYzCCAsygAwIBAgIJAJISzcX71f5pMA0GCSqGSIb3DQEBBAUAMH8xCzAJBgNV -BAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIxFzAV -BgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwGCSqG -SIb3DQEJARYPdG9udm9vbkBtYWMuY29tMB4XDTA5MDMwNjAwMTMxNVoXDTA5MDMw -NTAwMTMxNlowfzELMAkGA1UEBhMCVUsxEzARBgNVBAgTCkRlcmJ5c2hpcmUxDzAN -BgNVBAcTBkJlbHBlcjEXMBUGA1UEChMOTmFnaW9zIFBsdWdpbnMxETAPBgNVBAMT -CFRvbiBWb29uMR4wHAYJKoZIhvcNAQkBFg90b252b29uQG1hYy5jb20wgZ8wDQYJ -KoZIhvcNAQEBBQADgY0AMIGJAoGBAOQHP4JnzACi4q6quXAiK+gTSffG6yyjEV+K -iyutRgBF2MdF03X5ls0wENw/5fnMTrHynl4XoGoV/rD4CR2hGT0m7dv7Vu0MRLlP -J1SCiFeMuQS30zzLMJr0A7IW869qRlKQmzxs1JT6XDbSoNQuF154zoxwNsKlMjoX -tJSHN2YpAgMBAAGjgeYwgeMwHQYDVR0OBBYEFHWjM9OQldrDLMcAfPnUVfGxlzOp -MIGzBgNVHSMEgaswgaiAFHWjM9OQldrDLMcAfPnUVfGxlzOpoYGEpIGBMH8xCzAJ -BgNVBAYTAlVLMRMwEQYDVQQIEwpEZXJieXNoaXJlMQ8wDQYDVQQHEwZCZWxwZXIx -FzAVBgNVBAoTDk5hZ2lvcyBQbHVnaW5zMREwDwYDVQQDEwhUb24gVm9vbjEeMBwG -CSqGSIb3DQEJARYPdG9udm9vbkBtYWMuY29tggkAkhLNxfvV/mkwDAYDVR0TBAUw -AwEB/zANBgkqhkiG9w0BAQQFAAOBgQDHjoXoGwBamCiNplTt93jH/TO08RATdZP5 -45hlxv2+PKCjjTiFa2mjAvopFiqmYsr40XYEmpeYMiaOzOW5rBjtqBAT/JJWyfda -SCmj3swqyKus63rv/iuokIhZzBdhbB+eOJJrmwT2SEc5KdRaipH0QAGF1nZAAGzo -6xW7hkzYog== +MIIEETCCAvmgAwIBAgIUFDsP6WnV/uqeQMpD/DYSqouE13kwDQYJKoZIhvcNAQEL +BQAwgZcxCzAJBgNVBAYTAkRFMRAwDgYDVQQIDAdCYXZhcmlhMQ8wDQYDVQQHDAZN +dW5pY2gxGzAZBgNVBAoMEk1vbml0b3JpbmcgUGx1Z2luczEbMBkGA1UEAwwSTW9u +aXRvcmluZyBQbHVnaW5zMSswKQYJKoZIhvcNAQkBFhxkZXZlbEBtb25pdG9yaW5n +LXBsdWdpbnMub3JnMB4XDTA4MDEwMTExMDAyNloXDTA4MDEwMjExMDAyNlowgZcx +CzAJBgNVBAYTAkRFMRAwDgYDVQQIDAdCYXZhcmlhMQ8wDQYDVQQHDAZNdW5pY2gx +GzAZBgNVBAoMEk1vbml0b3JpbmcgUGx1Z2luczEbMBkGA1UEAwwSTW9uaXRvcmlu +ZyBQbHVnaW5zMSswKQYJKoZIhvcNAQkBFhxkZXZlbEBtb25pdG9yaW5nLXBsdWdp +bnMub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyeHKwKFjJWUX +YHKsisypUf9dHlIPQAISyGP1BX6UL26ZLvE6kKbx3LFQ9W2POGoQWlzFiB1soGeV +WDd0U0JtWdCKmOXWdcXpupQlTSUtRCMDQkfqLN8GR5TBTd73rezp5mz08nMfLwu0 +p5VQ191Ui8JHFgrAOalAn8Uw5De8vj4VmTXmU5NJ2UFoC0ddU/Th/lwRCayHc1cn +MVq2F7c/uhMUUQYNBmJy0pxoHawp+j9NKl/xIYsjgQNgahQyNuswuGHjaEwhPu+7 +G03XsW4ehu+H1898M/MkSln6LQAU1syoJ8ypPM8tV+zgx4uwj7udnZ2hceN95uW7 +0PWg5DQyUwIDAQABo1MwUTAdBgNVHQ4EFgQUt9ps3KJ1XiMuy/ijFBjMzf6jgwkw +HwYDVR0jBBgwFoAUt9ps3KJ1XiMuy/ijFBjMzf6jgwkwDwYDVR0TAQH/BAUwAwEB +/zANBgkqhkiG9w0BAQsFAAOCAQEAVPBZwMHbrnHFbmhbcPuvYd5cxk0uSVNAUzsl +2biCq5P+ZHo10VHGygXtdV4utqk/IrAt2u5qSxycWPStCtAgTd3Q8ncfjOkaHM4z +2bxTkhLyQeU8NWPuDBqDszo2GOaFTv+lm36LEKiAfqB1tjQVePSkycdrWIhkamBV +EgMe6uHLdU7QQk1ajQfrBdakN1beqki/dKieA6gm+XF/QS4SSYINmsHB/2X5cT9U +b/KMB8xurCnuJQuk1P4VsSkJCOSeHjWZgK9pKNdsIJZr4wDVfhjQgU0XT6xakSf7 +eCaHtO0VKsbLZoiTmpxidjsdYiXyeKYIQNtUpTjyJ5V/cZsq9w== -----END CERTIFICATE----- diff --git a/plugins/tests/certs/expired-key.pem b/plugins/tests/certs/expired-key.pem index af0e24d..c1510b2 100644 --- a/plugins/tests/certs/expired-key.pem +++ b/plugins/tests/certs/expired-key.pem @@ -1,15 +1,28 @@ ------BEGIN RSA PRIVATE KEY----- -MIICXAIBAAKBgQDkBz+CZ8wAouKuqrlwIivoE0n3xussoxFfiosrrUYARdjHRdN1 -+ZbNMBDcP+X5zE6x8p5eF6BqFf6w+AkdoRk9Ju3b+1btDES5TydUgohXjLkEt9M8 -yzCa9AOyFvOvakZSkJs8bNSU+lw20qDULhdeeM6McDbCpTI6F7SUhzdmKQIDAQAB -AoGARgI3rHjjuDpKMGg4IMZNBqaNaiZHY9/44IVvrww21rSbFqtIfgsQEpU0R/rS -R7xDWPztRGQqmwd/t6OfYNpqHbjO1MWzasVBVnzue5P59Y1xy1h0LZF8+a9GY++0 -uAGUC24jsXSmypNVzoX+ZKyinA3oYV/etdPYx1W8Ms5XIzUCQQD7xwhMuLok6Kbq -UEgiSfBTbx+haP3IiqqMF14z8QoEyD3jchydNaXEYdQxN8jEl2aPrMqTc6x8Jq4/ -ai0OkB+fAkEA59pAmN81HylV7+CsVjLOSbJqzau7NDxSs2uutxhHZRwz0e25wVer -fA03l08u0ebC/TDHkmHV6ikCryM5HU2FNwJAVZJFzd2S1myEHmr+uTisB49jDrbi -WkBWypo+mCS6JPnxntXvx7auClq9haTSBY73eqldiFPuMZvr6P2rJqHxPQJBAOTM -quaxjti7kATy8N73sD9mBKQGju1TgkFxSK+DFCGhnTnToXY9MAtxd6SoDYoyccYu -dyPrzJAR/IYc+mYCdC0CQDKlZuMPVXEgvGaQapzMQ++5yJRvMZF4tWvONBs0OCE9 -QYarsTi5M20cymMBXHOLZIjqwsni4G/C9kqJSvC75Vg= ------END RSA PRIVATE KEY----- +-----BEGIN PRIVATE KEY----- +MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQDJ4crAoWMlZRdg +cqyKzKlR/10eUg9AAhLIY/UFfpQvbpku8TqQpvHcsVD1bY84ahBaXMWIHWygZ5VY +N3RTQm1Z0IqY5dZ1xem6lCVNJS1EIwNCR+os3wZHlMFN3vet7OnmbPTycx8vC7Sn +lVDX3VSLwkcWCsA5qUCfxTDkN7y+PhWZNeZTk0nZQWgLR11T9OH+XBEJrIdzVycx +WrYXtz+6ExRRBg0GYnLSnGgdrCn6P00qX/EhiyOBA2BqFDI26zC4YeNoTCE+77sb +Tdexbh6G74fXz3wz8yRKWfotABTWzKgnzKk8zy1X7ODHi7CPu52dnaFx433m5bvQ +9aDkNDJTAgMBAAECggEACrLFfNnQmD24NGs/S4e2/VpsA9xTZI/3kNkDNgxULANP +aNZtxRajwI9A/BCXQ2UTgsZhzWnJxOJYXrlpl7PweY78mUesysb3MOUC6QisUm0M +kimfdktHWOnAKLFFLNleN9DUVjjVkTeslijqhNX80f80py1grG2UuCLKCX4OqYIm +qACE8TMmSZLz42AO96TndNtKplQ8LuGLEmByW95wEfhx3Gm4ckkL7qII/U3DnQXr +0T+3xLaj+eNJzYDpIFZiw4sNzOuAyCz+4Cc4sPDuMnzquXF+enpkemoycC1RmEpG +KIDTwmFsc8TrbGV0qifC6fsCrDivdYLqL7R/q3IBQQKBgQDmfvO3VYTEKY8NA+AT +5s6+7NTxRsXxJUCEhCNBWimSH3EzmBAvrodLY6A0oYg8i81bgNX1I9GPVXJZ/QA7 +ukd84HUIQoGS5Usmo4rp+kz4P6KkLXDemZtWPU5GXxicfajHRQlkbW6St6SpV7IS +ibJcDADeoiaPL1xvue1ToP/LoQKBgQDgOFHjYpep00gabvjXfYW7vhrg1vVwaKUM +rf0+UW8Exk4nbBw0eEC2YjxIwzdktlkdbzGaXYULnhg8GnfxYesMOpCLPw1JdB8o +ixETAFpW5bKrUsjEFRUGhzWnsCSFIQ4smpmtGLTxOQ8AkoDdORY5Z+Wv7JtFF6Do +PSoblckZcwKBgB3TD3YJesRnHDty5OuuUdIikuslXTd2uoJrFqS+JeLibqNeabnB +u3/lxDULMbWj4U6VvRmbKOKDC+jY887Gq7lc0cff0yROxwqY3sCnwo3crg7QUmp7 +Nb5S8G3qoCSfndcq96wm/Me/O28uCbycVJfUdchY8uRUHIHYbP0FOBQBAoGBAMgh +fPX4imaKr1DovDObVkK87EDDnU84GBm5MtDs3qrkVd3aIVK0Aw7HoAdSN58tI12i +YiPmVVqJQhhjh6tsOuAvZdTj8ngdrbICbrsHFZt6an+A5LIgHyQ0iy+hiPdLCdvG +ImTeKKMmyr04Bs1upueWVO0xw2VoMbcY4Py+NUEBAoGASQqedfCSKGLT+5lLZrhP +CbFVMmswEPjBcRb1trcuA09vfExn9FfUNFnnw3i9miprED5kufvAjb+6nduXizKg +7HQYHCwVvakgtXgbiDMaNgYZcjWm+MdnfiwLJjJTO3DfI1JF2PJ8y9R95DPlAkDm +xH3OV8KV4UiTEVxS7ksmGzY= +-----END PRIVATE KEY----- diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index fe65325..2f051fa 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -4,6 +4,8 @@ # # To create the https server certificate: # openssl req -new -x509 -keyout server-key.pem -out server-cert.pem -days 3650 -nodes +# to create a new expired certificate: +# faketime '2008-01-01 12:00:00' openssl req -new -x509 -keyout expired-key.pem -out expired-cert.pem -days 1 -nodes # Country Name (2 letter code) [AU]:DE # State or Province Name (full name) [Some-State]:Bavaria # Locality Name (eg, city) []:Munich @@ -211,7 +213,7 @@ SKIP: { $result = NPTest->testCmd( "$command -p $port_https_expired -S -C 7" ); is( $result->return_code, 2, "$command -p $port_https_expired -S -C 7" ); is( $result->output, - 'CRITICAL - Certificate \'Ton Voon\' expired on Thu Mar 5 00:13:16 2009 +0000.', + 'CRITICAL - Certificate \'Monitoring Plugins\' expired on Wed Jan 2 11:00:26 2008 +0000.', "output ok" ); } -- cgit v0.10-9-g596f From d54f14a09238fff7b8f4454b59d0adaef446d5c6 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Fri, 15 May 2020 11:52:55 +0200 Subject: merge test changes from check_http the example certificate has changed since. diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index e182623..1afbe4b 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -4,13 +4,15 @@ # # To create the https server certificate: # openssl req -new -x509 -keyout server-key.pem -out server-cert.pem -days 3650 -nodes -# Country Name (2 letter code) [AU]:UK -# State or Province Name (full name) [Some-State]:Derbyshire -# Locality Name (eg, city) []:Belper +# to create a new expired certificate: +# faketime '2008-01-01 12:00:00' openssl req -new -x509 -keyout expired-key.pem -out expired-cert.pem -days 1 -nodes +# Country Name (2 letter code) [AU]:DE +# State or Province Name (full name) [Some-State]:Bavaria +# Locality Name (eg, city) []:Munich # Organization Name (eg, company) [Internet Widgits Pty Ltd]:Monitoring Plugins # Organizational Unit Name (eg, section) []: -# Common Name (eg, YOUR name) []:Ton Voon -# Email Address []:tonvoon@mac.com +# Common Name (e.g. server FQDN or YOUR name) []:Monitoring Plugins +# Email Address []:devel@monitoring-plugins.org use strict; use Test::More; @@ -221,21 +223,21 @@ SKIP: { $result = NPTest->testCmd( "$command -p $port_https -S -C 14" ); is( $result->return_code, 0, "$command -p $port_https -S -C 14" ); - is( $result->output, 'OK - Certificate \'Ton Voon\' will expire on Sun Mar 3 21:41:28 2019 +0000.', "output ok" ); + is( $result->output, "OK - Certificate 'Monitoring Plugins' will expire on Fri Feb 16 15:31:44 2029 +0000.", "output ok" ); $result = NPTest->testCmd( "$command -p $port_https -S -C 14000" ); is( $result->return_code, 1, "$command -p $port_https -S -C 14000" ); - like( $result->output, '/WARNING - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + like( $result->output, '/WARNING - Certificate \'Monitoring Plugins\' expires in \d+ day\(s\) \(Fri Feb 16 15:31:44 2029 \+0000\)./', "output ok" ); # Expired cert tests $result = NPTest->testCmd( "$command -p $port_https -S -C 13960,14000" ); is( $result->return_code, 2, "$command -p $port_https -S -C 13960,14000" ); - like( $result->output, '/CRITICAL - Certificate \'Ton Voon\' expires in \d+ day\(s\) \(Sun Mar 3 21:41:28 2019 \+0000\)./', "output ok" ); + like( $result->output, '/CRITICAL - Certificate \'Monitoring Plugins\' expires in \d+ day\(s\) \(Fri Feb 16 15:31:44 2029 \+0000\)./', "output ok" ); $result = NPTest->testCmd( "$command -p $port_https_expired -S -C 7" ); is( $result->return_code, 2, "$command -p $port_https_expired -S -C 7" ); is( $result->output, - 'CRITICAL - Certificate \'Ton Voon\' expired on Thu Mar 5 00:13:16 2009 +0000.', + 'CRITICAL - Certificate \'Monitoring Plugins\' expired on Wed Jan 2 11:00:26 2008 +0000.', "output ok" ); } @@ -288,7 +290,6 @@ SKIP: { } - sub run_common_tests { my ($opts) = @_; my $command = $opts->{command}; -- cgit v0.10-9-g596f From 8a64e47083674a83f6825d6438f96ec21e6f3168 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 18 May 2020 11:30:34 +0200 Subject: check_curl: clean trailing whitespace diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 7aae920..947144a 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -392,7 +392,7 @@ check_http (void) if (http_method && !strcmp (http_method, "HEAD" )) { no_body = TRUE; } - + /* set HTTP protocol version */ handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_HTTP_VERSION, curl_http_version), "CURLOPT_HTTP_VERSION"); @@ -632,7 +632,7 @@ check_http (void) server_port, res, curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } - + /* certificate checks */ #ifdef LIBCURL_FEATURE_SSL if (use_ssl == TRUE) { @@ -1504,7 +1504,7 @@ process_arguments (int argc, char **argv) break; case HTTP_VERSION_OPTION: curl_http_version = CURL_HTTP_VERSION_NONE; - if (strcmp (optarg, "1.0") == 0) { + if (strcmp (optarg, "1.0") == 0) { curl_http_version = CURL_HTTP_VERSION_1_0; } else if (strcmp (optarg, "1.1") == 0) { curl_http_version = CURL_HTTP_VERSION_1_1; @@ -1724,7 +1724,7 @@ print_help (void) printf ("\n"); printf (" %s\n", "--http-version=VERSION"); printf (" %s\n", _("Connect via specific HTTP protocol.")); - printf (" %s\n", _("1.0 = HTTP/1.0, 1.1 = HTTP/1.1, 2.0 = HTTP/2 (HTTP/2 will fail without -S)")); + printf (" %s\n", _("1.0 = HTTP/1.0, 1.1 = HTTP/1.1, 2.0 = HTTP/2 (HTTP/2 will fail without -S)")); printf ("\n"); printf (UT_WARN_CRIT); @@ -1809,7 +1809,7 @@ print_usage (void) printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); printf (" [-T ] [-j method]\n"); - printf (" [--http-version=]\n"); + printf (" [--http-version=]\n"); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); @@ -1958,7 +1958,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) p = strtok( NULL, " " ); if( p == NULL ) { free( first_line_buf ); return -1; } if( strchr( p, '.' ) != NULL ) { - + /* HTTP 1.x case */ char *ppp; ppp = strtok( p, "." ); @@ -2219,7 +2219,7 @@ net_noopenssl_check_certificate (cert_ptr_union* cert_ptr, int days_till_exp_war for (i = 0; i < cert_ptr->to_certinfo->num_of_certs; i++) { for (slist = cert_ptr->to_certinfo->certinfo[i]; slist; slist = slist->next) { - /* find first common name in subject, + /* find first common name in subject, * TODO: check alternative subjects for * TODO: have a decent parser here and not a hack * multi-host certificate, check wildcards -- cgit v0.10-9-g596f From 84fd9ae893b53c7dfde78845817d4e1c87b7fed5 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 18 May 2020 13:43:17 +0200 Subject: check_curl: use CURLOPT_RESOLVE to fix connecting to the right ip when using ssl, the composed url contains the hostname instead of the specified ip. So use CURLOPT_RESOLVE to make curl still connect to the ip. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 947144a..2b0e378 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -366,6 +366,17 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CONNECTTIMEOUT, socket_timeout), "CURLOPT_CONNECTTIMEOUT"); handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); + // fill dns resolve cache to make curl connect to the given server_address instead of the host_name, only required for ssl, because we use the host_name later on to make SNI happy + if(use_ssl) { + struct curl_slist *host = NULL; + char dnscache[DEFAULT_BUFFER_SIZE]; + snprintf (dnscache, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); + host = curl_slist_append(NULL, dnscache); + curl_easy_setopt(curl, CURLOPT_RESOLVE, host); + if (verbose>=1) + printf ("* curl CURLOPT_RESOLVE: %s\n", dnscache); + } + /* compose URL: use the address we want to connect to, set Host: header later */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", use_ssl ? "https" : "http", -- cgit v0.10-9-g596f From 7d2582deb36d5bc1dd961be83bedc1e8fc8cb3c7 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 18 May 2020 14:08:27 +0200 Subject: update test parameter according to check_http diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index 050416c..4bff538 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -17,32 +17,15 @@ my $res; my $plugin = 'check_http'; $plugin = 'check_curl' if $0 =~ m/check_curl/mx; -my $host_tcp_http = getTestParameter( "NP_HOST_TCP_HTTP", - "A host providing the HTTP Service (a web server)", - "localhost" ); - -my $host_tls_http = getTestParameter( "host_tls_http", "NP_HOST_TLS_HTTP", "localhost", - "A host providing the HTTPS Service (a tls web server)" ); - -my $host_tls_cert = getTestParameter( "host_tls_cert", "NP_HOST_TLS_CERT", "localhost", - "the common name of the certificate." ); - - -my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", - "The hostname of system not responsive to network requests", - "10.0.0.1" ); - -my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", - "An invalid (not known to DNS) hostname", - "nosuchhost"); - -my $internet_access = getTestParameter( "NP_INTERNET_ACCESS", - "Is this system directly connected to the internet?", - "yes"); - -my $host_tcp_http2 = getTestParameter( "NP_HOST_TCP_HTTP2", - "A host providing an index page containing the string 'monitoring'", - "test.monitoring-plugins.org" ); +my $host_tcp_http = getTestParameter("NP_HOST_TCP_HTTP", "A host providing the HTTP Service (a web server)", "localhost"); +my $host_tls_http = getTestParameter("NP_HOST_TLS_HTTP", "A host providing the HTTPS Service (a tls web server)", "localhost"); +my $host_tls_cert = getTestParameter("NP_HOST_TLS_CERT", "the common name of the certificate.", "localhost"); +my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); +my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); +my $internet_access = getTestParameter("NP_INTERNET_ACCESS", "Is this system directly connected to the internet?", "yes"); +my $host_tcp_http2 = getTestParameter("NP_HOST_TCP_HTTP2", "A host providing an index page containing the string 'monitoring'", "test.monitoring-plugins.org"); +my $host_tcp_proxy = getTestParameter("NP_HOST_TCP_PROXY", "A host providing a HTTP proxy with CONNECT support", "localhost"); +my $port_tcp_proxy = getTestParameter("NP_PORT_TCP_PROXY", "Port of the proxy with HTTP and CONNECT support", "3128"); my $faketime = -x '/usr/bin/faketime' ? 1 : 0; -- cgit v0.10-9-g596f From 772fb233b92d4ad5fc87f30a8efee5c9bb295d1d Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 18 May 2020 14:08:45 +0200 Subject: check_curl: host_name may be null for example when using like: ./check_curl localhost diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 2b0e378..2d69b31 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -127,8 +127,8 @@ int cflags = REG_NOSUB | REG_EXTENDED | REG_NEWLINE; int errcode; int invert_regex = 0; -char *server_address; -char *host_name; +char *server_address = NULL; +char *host_name = NULL; char *server_url = 0; char server_ip[DEFAULT_BUFFER_SIZE]; struct curl_slist *server_ips = NULL; @@ -367,7 +367,7 @@ check_http (void) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_TIMEOUT, socket_timeout), "CURLOPT_TIMEOUT"); // fill dns resolve cache to make curl connect to the given server_address instead of the host_name, only required for ssl, because we use the host_name later on to make SNI happy - if(use_ssl) { + if(use_ssl && host_name != NULL) { struct curl_slist *host = NULL; char dnscache[DEFAULT_BUFFER_SIZE]; snprintf (dnscache, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); @@ -380,7 +380,7 @@ check_http (void) /* compose URL: use the address we want to connect to, set Host: header later */ snprintf (url, DEFAULT_BUFFER_SIZE, "%s://%s:%d%s", use_ssl ? "https" : "http", - use_ssl ? host_name : server_address, + use_ssl & host_name != NULL ? host_name : server_address, server_port, server_url ); -- cgit v0.10-9-g596f From 905b09c38b6b8b08f0fe4a43b9b118366817bf0f Mon Sep 17 00:00:00 2001 From: ghciv6 Date: Wed, 20 May 2020 23:02:42 +0200 Subject: detect unreachable dns service in nslookup output (from bind-utils-9.8.2) prevent core if error_scan detects an error in a line without ':' diff --git a/plugins/check_dns.c b/plugins/check_dns.c index d4d0b88..b90f50e 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -202,7 +202,10 @@ main (int argc, char **argv) if (error_scan (chld_err.line[i]) != STATE_OK) { result = max_state (result, error_scan (chld_err.line[i])); msg = strchr(input_buffer, ':'); - if(msg) msg++; + if(msg) + msg++; + else + msg = input_buffer; } } @@ -348,6 +351,8 @@ error_scan (char *input_buffer) /* DNS server is not running... */ else if (strstr (input_buffer, "No response from server")) die (STATE_CRITICAL, _("No response from DNS %s\n"), dns_server); + else if (strstr (input_buffer, "no servers could be reached")) + die (STATE_CRITICAL, _("No response from DNS %s\n"), dns_server); /* Host name is valid, but server doesn't have records... */ else if (strstr (input_buffer, "No records")) -- cgit v0.10-9-g596f From b8b87b55d61aceff03107b0335347257f429e9ad Mon Sep 17 00:00:00 2001 From: ghciv6 Date: Tue, 15 Sep 2020 21:36:27 +0200 Subject: - fix for issue #1562 1st compare then free up resources diff --git a/plugins/check_mysql_query.c b/plugins/check_mysql_query.c index 49a14dd..ac2fb15 100644 --- a/plugins/check_mysql_query.c +++ b/plugins/check_mysql_query.c @@ -136,18 +136,18 @@ main (int argc, char **argv) die (STATE_CRITICAL, "QUERY %s: Fetch row error - %s\n", _("CRITICAL"), error); } - /* free the result */ - mysql_free_result (res); - - /* close the connection */ - mysql_close (&mysql); - if (! is_numeric(row[0])) { die (STATE_CRITICAL, "QUERY %s: %s - '%s'\n", _("CRITICAL"), _("Is not a numeric"), row[0]); } value = strtod(row[0], NULL); + /* free the result */ + mysql_free_result (res); + + /* close the connection */ + mysql_close (&mysql); + if (verbose >= 3) printf("mysql result: %f\n", value); -- cgit v0.10-9-g596f From 1039822de848daf4f367d914634d782e3316026a Mon Sep 17 00:00:00 2001 From: Prathamesh Bhanuse <72161308+Prathu121@users.noreply.github.com> Date: Fri, 2 Oct 2020 01:48:46 +0530 Subject: Update README diff --git a/README b/README index beb7769..71b4d37 100644 --- a/README +++ b/README @@ -10,7 +10,7 @@ Monitoring Plugins * For information on detailed changes that have been made or plugins that have been added, read the `ChangeLog` file. -* Some plugins require that you have additional programs and/or +* Some plugins require that you have additional programs or libraries installed on your system before they can be used. Plugins that are dependent on other programs/libraries that are missing are usually not compiled. Read the `REQUIREMENTS` file for more information. @@ -19,7 +19,7 @@ Monitoring Plugins the basic guidelines for development will provide detailed help when invoked with the `-h` or `--help` options. -You can check for the latest plugins at: +You can check the latest plugins at: * -- cgit v0.10-9-g596f From ad99755033f33a301abc1815d746644067bc297a Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Mon, 2 Nov 2020 20:05:56 +0100 Subject: check_dns: split multiple IP addresses passed in one -a argument diff --git a/plugins/check_dns.c b/plugins/check_dns.c index b90f50e..0f2e654 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -473,9 +473,23 @@ process_arguments (int argc, char **argv) case 'a': /* expected address */ if (strlen (optarg) >= ADDRESS_LENGTH) die (STATE_UNKNOWN, _("Input buffer overflow\n")); - expected_address = (char **)realloc(expected_address, (expected_address_cnt+1) * sizeof(char**)); - expected_address[expected_address_cnt] = strdup(optarg); - expected_address_cnt++; + if (strchr(optarg, ',') != NULL) { + char *comma = strchr(optarg, ','); + while (comma != NULL) { + expected_address = (char **)realloc(expected_address, (expected_address_cnt+1) * sizeof(char**)); + expected_address[expected_address_cnt] = strndup(optarg, comma - optarg); + expected_address_cnt++; + optarg = comma + 1; + comma = strchr(optarg, ','); + } + expected_address = (char **)realloc(expected_address, (expected_address_cnt+1) * sizeof(char**)); + expected_address[expected_address_cnt] = strdup(optarg); + expected_address_cnt++; + } else { + expected_address = (char **)realloc(expected_address, (expected_address_cnt+1) * sizeof(char**)); + expected_address[expected_address_cnt] = strdup(optarg); + expected_address_cnt++; + } break; case 'A': /* expect authority */ expect_authority = TRUE; -- cgit v0.10-9-g596f From aa79ab278ffc9bf3d41207d97bdfb04be35b5c74 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 8 Dec 2020 16:24:10 +0100 Subject: check_mailq: restore accidentially removed options with https://github.com/monitoring-plugins/monitoring-plugins/issues/381 -W and -C have been removed. It would have been sufficient to only remove the long options. Restoring short options.. - fixes https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954961 diff --git a/plugins-scripts/check_mailq.pl b/plugins-scripts/check_mailq.pl index 32f498d..aac1310 100755 --- a/plugins-scripts/check_mailq.pl +++ b/plugins-scripts/check_mailq.pl @@ -568,7 +568,9 @@ sub process_arguments(){ "w=i" => \$opt_w, "warning=i" => \$opt_w, # warning if above this number "c=i" => \$opt_c, "critical=i" => \$opt_c, # critical if above this number "t=i" => \$opt_t, "timeout=i" => \$opt_t, - "s" => \$opt_s, "sudo" => \$opt_s + "s" => \$opt_s, "sudo" => \$opt_s, + "W=i" => \$opt_W, # warning if above this number + "C=i" => \$opt_C, # critical if above this number ); if ($opt_V) { @@ -662,8 +664,8 @@ sub print_help () { print " Feedback/patches to support non-sendmail mailqueue welcome\n\n"; print "-w (--warning) = Min. number of messages in queue to generate warning\n"; print "-c (--critical) = Min. number of messages in queue to generate critical alert ( w < c )\n"; - print "-W (--Warning) = Min. number of messages for same domain in queue to generate warning\n"; - print "-C (--Critical) = Min. number of messages for same domain in queue to generate critical alert ( W < C )\n"; + print "-W = Min. number of messages for same domain in queue to generate warning\n"; + print "-C = Min. number of messages for same domain in queue to generate critical alert ( W < C )\n"; print "-t (--timeout) = Plugin timeout in seconds (default = $utils::TIMEOUT)\n"; print "-M (--mailserver) = [ sendmail | qmail | postfix | exim | nullmailer ] (default = autodetect)\n"; print "-s (--sudo) = Use sudo to call the mailq command\n"; -- cgit v0.10-9-g596f From 233251f43ba8404f3fd6fc3524ac06e6924985fb Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 14:10:53 +0100 Subject: Updating version number diff --git a/NP-VERSION-GEN b/NP-VERSION-GEN index cf78d69..dd74d0c 100755 --- a/NP-VERSION-GEN +++ b/NP-VERSION-GEN @@ -6,7 +6,7 @@ SRC_ROOT=`dirname $0` NPVF=NP-VERSION-FILE -DEF_VER=2.2.git +DEF_VER=2.3 LF=' ' diff --git a/configure.ac b/configure.ac index 4aebc2a..562efcd 100644 --- a/configure.ac +++ b/configure.ac @@ -1,6 +1,6 @@ dnl Process this file with autoconf to produce a configure script. AC_PREREQ(2.59) -AC_INIT(monitoring-plugins,2.2) +AC_INIT(monitoring-plugins,2.3) AC_CONFIG_SRCDIR(NPTest.pm) AC_CONFIG_FILES([gl/Makefile]) AC_CONFIG_AUX_DIR(build-aux) -- cgit v0.10-9-g596f From 5789a76bbce7dbe3793058b13419b701822d4b8b Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 15:32:23 +0100 Subject: Updating contributors diff --git a/THANKS.in b/THANKS.in index 9bb4382..7d1d1ff 100644 --- a/THANKS.in +++ b/THANKS.in @@ -357,3 +357,27 @@ Thomas Kurschel Yannick Charton Nicolai Søborg Rolf Eike Beer +Bernd Arnold +Andreas Baumann +Tobias Wolf +Lars Michelsen +Vincent Danjean +Kostyantyn Hushchyn +Christian Tacke +Alexander A. Klimov +Vadim Zhukov +Bernard Spil +Christian Schmidt +Guido Falsi +Harald Koch +Iustin Pop +Jacob Hansen +Jean-François Rameau +Karol Babioch +Lucas Bussey +Marc Sánchez +Markus Frosch +Michael Kraus +Patrick Rauscher +Prathamesh Bhanuse +Valentin Vidic -- cgit v0.10-9-g596f From d9c87f84b4075c0efeb46c2f984b2170a00b8c89 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 15:33:18 +0100 Subject: Draft NEWS diff --git a/NEWS b/NEWS index 0848705..f9f2da6 100644 --- a/NEWS +++ b/NEWS @@ -1,17 +1,51 @@ This file documents the major additions and syntax changes between releases. -2.3 [...] +2.3 10th December 2020 ENHANCEMENTS check_dns: allow 'expected address' (-a) to be specified in CIDR notation (IPv4 only). check_dns: allow for IPv6 RDNS + check_dns: Accept CIDR check_dns: allow unsorted addresses check_dns: allow forcing complete match of all addresses check_apt: add --only-critical switch check_apt: add -l/--list option to print packages + check_file_age: add range checking + check_file_age: enable to test for maximum file size + check_apt: adding packages-warning option + check_load: Adding top consuming processes option + check_http: Adding Proxy-Authorization and extra headers + check_snmp: make calcualtion of timeout value in help output more clear + check_uptime: new plugin for checking uptime to see how long the system is running + check_curl: check_http replacement based on libcurl + check_http: Allow user to specify HTTP method after proxy CONNECT + check_http: Add new flag --show-body/-B to print body + check_cluster: Added data argument validation + check_icmp: Add IPv6 support + check_icmp: Automatically detect IP protocol + check_icmp: emit error if multiple protocol version + check_disk: add support to display inodes usage in perfdata + check_hpjd: Added -D option to disable warning on 'out of paper' + check_http: support the --show-body/-B flag when --expect is used + check_mysql: allow mariadbclient to be used + check_tcp: add --sni + check_dns: detect unreachable dns service in nslookup output FIXES Fix regression where check_dhcp was rereading response in a tight loop + check_dns: fix error detection on sles nslookup + check_disk_smb: fix timeout issue + check_swap: repaired "-n" behaviour + check_icmp: Correctly set address_family on lookup + check_icmp: Do not overwrite -4,-6 on lookup + check_smtp: initializes n before it is used + check_dns: fix typo in parameter description + check_by_ssh: fix child process leak on timeouts + check_mysql: Allow sockets to be specified to -H + check_procs: improve command examples for 'at least' processes + check_swap: repaired "-n" behaviour + check_disk: include -P switch in help + check_mailq: restore accidentially removed options 2.2 29th November 2016 ENHANCEMENTS -- cgit v0.10-9-g596f From bcedcee206b489d9fc2fb5ae49f934c1b44ee1d0 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 22:35:02 +0100 Subject: New version number for git diff --git a/NP-VERSION-GEN b/NP-VERSION-GEN index dd74d0c..c353b1d 100755 --- a/NP-VERSION-GEN +++ b/NP-VERSION-GEN @@ -6,7 +6,7 @@ SRC_ROOT=`dirname $0` NPVF=NP-VERSION-FILE -DEF_VER=2.3 +DEF_VER=2.3git LF=' ' diff --git a/configure.ac b/configure.ac index 562efcd..7c17dcd 100644 --- a/configure.ac +++ b/configure.ac @@ -1,6 +1,6 @@ dnl Process this file with autoconf to produce a configure script. AC_PREREQ(2.59) -AC_INIT(monitoring-plugins,2.3) +AC_INIT(monitoring-plugins,2.3git) AC_CONFIG_SRCDIR(NPTest.pm) AC_CONFIG_FILES([gl/Makefile]) AC_CONFIG_AUX_DIR(build-aux) -- cgit v0.10-9-g596f From b42294b1ebcb7d4661596d487894114a893dff17 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 22:52:08 +0100 Subject: New version in NEWS diff --git a/NEWS b/NEWS index f9f2da6..4061c03 100644 --- a/NEWS +++ b/NEWS @@ -1,5 +1,10 @@ This file documents the major additions and syntax changes between releases. +2.4 [...] + ENHANCEMENTS + + FIXES + 2.3 10th December 2020 ENHANCEMENTS check_dns: allow 'expected address' (-a) to be specified in CIDR notation -- cgit v0.10-9-g596f From 7fdbea06c7d7f82359d04903be1bdb0eea5a9e89 Mon Sep 17 00:00:00 2001 From: Jan Wagner Date: Wed, 9 Dec 2020 22:54:38 +0100 Subject: Prepare the release docu for 2024 when we release 2.4 diff --git a/doc/RELEASING.md b/doc/RELEASING.md index 1f9db07..bcd2c5a 100644 --- a/doc/RELEASING.md +++ b/doc/RELEASING.md @@ -11,14 +11,14 @@ Before you start - Check Travis CI status. - Update local Git repository to the current `master` tip. For a - maintenance release (e.g., version 2.2.2), update to the current - `maint-2.2` tip, instead. + maintenance release (e.g., version 2.3.2), update to the current + `maint-2.3` tip, instead. Prepare and commit files ------------------------ - Update `configure.ac` and `NP-VERSION-GEN` with new version. -- Update `NEWS` from `git log --reverse v2.2.1..` output, and specify +- Update `NEWS` from `git log --reverse v2.3.1..` output, and specify the release version/date. - Update `AUTHORS` if there are new team members. - Update `THANKS.in` using `tools/update-thanks`. @@ -29,27 +29,27 @@ Prepare and commit files Create annotated tag -------------------- - git tag -a -m 'Monitoring Plugins 2.3' v2.3 + git tag -a -m 'Monitoring Plugins 2.4' v2.4 Push the code and tag to GitHub ------------------------------- git push monitoring-plugins master - git push monitoring-plugins v2.3 + git push monitoring-plugins v2.4 Create new maintenance branch ----------------------------- _Only necessary when creating a feature release._ - git checkout -b maint-2.3 v2.3 - git push -u monitoring-plugins maint-2.3 + git checkout -b maint-2.4 v2.4 + git push -u monitoring-plugins maint-2.4 Checkout new version -------------------- rm -rf /tmp/plugins - git archive --prefix=tmp/plugins/ v2.3 | (cd /; tar -xf -) + git archive --prefix=tmp/plugins/ v2.4 | (cd /; tar -xf -) Build the tarball ----------------- @@ -62,26 +62,26 @@ Build the tarball Upload tarball to web site -------------------------- - scp monitoring-plugins-2.3.tar.gz \ + scp monitoring-plugins-2.4.tar.gz \ plugins@orwell.monitoring-plugins.org:web/download/ Generate SHA1 checksum file on web site --------------------------------------- ssh plugins@orwell.monitoring-plugins.org \ - '(cd web/download; $HOME/bin/create-checksum monitoring-plugins-2.3.tar.gz)' + '(cd web/download; $HOME/bin/create-checksum monitoring-plugins-2.4.tar.gz)' Announce new release -------------------- - In the site.git repository: - - Create `web/input/news/release-2-3.md`. + - Create `web/input/news/release-2-4.md`. - Update the `plugins_release` version in `web/macros.py`. - Commit and push the result: - git add web/input/news/release-2-3.md - git commit web/input/news/release-2-3.md web/macros.py + git add web/input/news/release-2-4.md + git commit web/input/news/release-2-4.md web/macros.py git push origin master - Post an announcement on (at least) the following mailing lists: @@ -93,6 +93,6 @@ Announce new release If you want to mention the number of contributors in the announcement: - git shortlog -s v2.2.1..v2.3 | wc -l + git shortlog -s v2.3.1..v2.4 | wc -l -- cgit v0.10-9-g596f From dbdd0f972af15db15a4e556bd6b2ccf149f59266 Mon Sep 17 00:00:00 2001 From: Tim Gates Date: Sat, 19 Dec 2020 17:14:23 +1100 Subject: docs: fix simple typo, conspicuosly -> conspicuously There is a small typo in plugins-root/check_icmp.c. Should read `conspicuously` rather than `conspicuosly`. diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index e45fdf6..31eb4c6 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -1134,7 +1134,7 @@ finish(int sig) while(host) { if(!host->icmp_recv) { /* rta 0 is ofcourse not entirely correct, but will still show up - * conspicuosly as missing entries in perfparse and cacti */ + * conspicuously as missing entries in perfparse and cacti */ pl = 100; rta = 0; status = STATE_CRITICAL; -- cgit v0.10-9-g596f From 8eaccee190734a12763a51aaa8a46f324f6742ec Mon Sep 17 00:00:00 2001 From: Wolfgang Karall-Ahlborn Date: Sun, 3 Jan 2021 11:27:44 +0100 Subject: check_procs -- exchange needle and haystack in strstr() for proper state match diff --git a/plugins/check_procs.c b/plugins/check_procs.c index f7917c3..0de6be9 100644 --- a/plugins/check_procs.c +++ b/plugins/check_procs.c @@ -265,7 +265,7 @@ main (int argc, char **argv) } } - if ((options & STAT) && (strstr (statopts, procstat))) + if ((options & STAT) && (strstr (procstat, statopts))) resultsum |= STAT; if ((options & ARGS) && procargs && (strstr (procargs, args) != NULL)) resultsum |= ARGS; -- cgit v0.10-9-g596f From 9076ea36f70dbd643de4102a88dbd2f18847af16 Mon Sep 17 00:00:00 2001 From: Wolfgang Karall-Ahlborn Date: Sun, 3 Jan 2021 12:18:31 +0100 Subject: check_procs -- update test data too diff --git a/plugins/tests/check_procs.t b/plugins/tests/check_procs.t index 54d43d9..6d71015 100755 --- a/plugins/tests/check_procs.t +++ b/plugins/tests/check_procs.t @@ -83,7 +83,7 @@ is( $result->output, 'PROCS OK: 3 processes with RSS >= 100000 | procs=3;;;0;', $result = NPTest->testCmd( "$command -s S" ); is( $result->return_code, 0, "Checking filter for sleeping processes" ); -like( $result->output, '/^PROCS OK: 44 processes with STATE = S/', "Output correct" ); +like( $result->output, '/^PROCS OK: 88 processes with STATE = S/', "Output correct" ); $result = NPTest->testCmd( "$command -s Z" ); is( $result->return_code, 0, "Checking filter for zombies" ); -- cgit v0.10-9-g596f From ede8defad4f44478f69e148022b542a694498087 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Tue, 19 Jan 2021 18:32:27 +0100 Subject: check_curl: fixed help, usage and errors for TLS 1.3 diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 2d69b31..ef77918 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1354,7 +1354,7 @@ process_arguments (int argc, char **argv) ssl_version = CURL_SSLVERSION_DEFAULT; #endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 52, 0) */ else - usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional '+' suffix)")); + usage4 (_("Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2, 1.3 (with optional '+' suffix)")); } #if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 54, 0) if (got_plus) { @@ -1659,7 +1659,7 @@ print_help (void) printf (" %s\n", "-S, --ssl=VERSION[+]"); printf (" %s\n", _("Connect via SSL. Port defaults to 443. VERSION is optional, and prevents")); printf (" %s\n", _("auto-negotiation (2 = SSLv2, 3 = SSLv3, 1 = TLSv1, 1.1 = TLSv1.1,")); - printf (" %s\n", _("1.2 = TLSv1.2). With a '+' suffix, newer versions are also accepted.")); + printf (" %s\n", _("1.2 = TLSv1.2, 1.3 = TLSv1.3). With a '+' suffix, newer versions are also accepted.")); printf (" %s\n", _("Note: SSLv2 and SSLv3 are deprecated and are usually disabled in libcurl")); printf (" %s\n", "--sni"); printf (" %s\n", _("Enable SSL/TLS hostname extension support (SNI)")); -- cgit v0.10-9-g596f From d9a5d1faf0400b9da47dee516c035da1a93dc12c Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Tue, 19 Jan 2021 18:35:41 +0100 Subject: check_curl: fixed a potential buffer overflow in url buffer diff --git a/plugins/check_curl.c b/plugins/check_curl.c index ef77918..a3f63f1 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1041,7 +1041,7 @@ redir (curlhelp_write_curlbuf* header_buf) const UriPathSegmentA* p = uri.pathHead; for (; p; p = p->next) { strncat (new_url, "/", DEFAULT_BUFFER_SIZE); - strncat (new_url, uri_string (p->text, buf, DEFAULT_BUFFER_SIZE), DEFAULT_BUFFER_SIZE); + strncat (new_url, uri_string (p->text, buf, DEFAULT_BUFFER_SIZE), DEFAULT_BUFFER_SIZE-1); } } -- cgit v0.10-9-g596f From dae075e65a38c65352d04f8c8fdfa21e2056d01c Mon Sep 17 00:00:00 2001 From: Florian Lohoff Date: Mon, 15 Feb 2021 15:34:07 +0100 Subject: Using snprintf which honors the buffers size and guarantees null termination. (Closes: #1601) As strcpy may overflow the resulting buffer: flo@p5:~$ /tmp/f/usr/lib/nagios/plugins/check_pgsql -d "$(seq 1 10000)" *** buffer overflow detected ***: terminated Aborted I would propose to change the code rather like this, using snprintf which honors the buffers size and guarantees null termination. diff --git a/plugins/check_pgsql.c b/plugins/check_pgsql.c index 11ce691..b8fc5f1 100644 --- a/plugins/check_pgsql.c +++ b/plugins/check_pgsql.c @@ -347,7 +347,7 @@ process_arguments (int argc, char **argv) if (!is_pg_dbname (optarg)) /* checks length and valid chars */ usage2 (_("Database name is not valid"), optarg); else /* we know length, and know optarg is terminated, so us strcpy */ - strcpy (dbName, optarg); + snprintf(dbName, NAMEDATALEN, "%s", optarg); break; case 'l': /* login name */ if (!is_pg_logname (optarg)) -- cgit v0.10-9-g596f From 0f926a3566fb6f3333f3a24e47e2ad204fd0fba4 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Mon, 8 Mar 2021 19:46:43 +0100 Subject: check_curl: added string_statuscode function for printing HTTP/1.1 and HTTP/2 correctly diff --git a/plugins/check_curl.c b/plugins/check_curl.c index a3f63f1..8f274c2 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -296,6 +296,28 @@ CURLcode sslctxfun(CURL *curl, SSL_CTX *sslctx, void *parm) #endif /* USE_OPENSSL */ #endif /* HAVE_SSL */ +/* returns a string "HTTP/1.x" or "HTTP/2" */ +static char *string_statuscode (int major, int minor) +{ + static char buf[10]; + + switch (major) { + case 1: + snprintf (buf, sizeof (buf), "HTTP/%d.%d", major, minor); + break; + case 2: + case 3: + snprintf (buf, sizeof (buf), "HTTP/%d", major); + break; + default: + /* assuming here HTTP/N with N>=4 */ + snprintf (buf, sizeof (buf), "HTTP/%d", major); + break; + } + + return buf; +} + /* Checks if the server 'reply' is one of the expected 'statuscodes' */ static int expected_statuscode (const char *reply, const char *statuscodes) @@ -746,7 +768,8 @@ GOT_FIRST_CERT: if (curlhelp_parse_statusline (header_buf.buf, &status_line) < 0) { snprintf (msg, DEFAULT_BUFFER_SIZE, "Unparsable status line in %.3g seconds response time|%s\n", total_time, perfstring); - die (STATE_CRITICAL, "HTTP CRITICAL HTTP/1.x %ld unknown - %s", code, msg); + /* we cannot know the major/minor version here for sure as we cannot parse the first line */ + die (STATE_CRITICAL, "HTTP CRITICAL HTTP/x.x %ld unknown - %s", code, msg); } /* get result code from cURL */ @@ -823,8 +846,8 @@ GOT_FIRST_CERT: /* check status codes, set exit status accordingly */ if( status_line.http_code != code ) { - die (STATE_CRITICAL, _("HTTP CRITICAL HTTP/%d.%d %d %s - different HTTP codes (cUrl has %ld)\n"), - status_line.http_major, status_line.http_minor, + die (STATE_CRITICAL, _("HTTP CRITICAL %s %d %s - different HTTP codes (cUrl has %ld)\n"), + string_statuscode (status_line.http_major, status_line.http_minor), status_line.http_code, status_line.msg, code); } @@ -895,8 +918,8 @@ GOT_FIRST_CERT: msg[strlen(msg)-3] = '\0'; /* TODO: separate _() msg and status code: die (result, "HTTP %s: %s\n", state_text(result), msg); */ - die (result, "HTTP %s: HTTP/%d.%d %d %s%s%s - %d bytes in %.3f second response time %s|%s\n", - state_text(result), status_line.http_major, status_line.http_minor, + die (result, "HTTP %s: %s %d %s%s%s - %d bytes in %.3f second response time %s|%s\n", + state_text(result), string_statuscode (status_line.http_major, status_line.http_minor), status_line.http_code, status_line.msg, strlen(msg) > 0 ? " - " : "", msg, page_len, total_time, -- cgit v0.10-9-g596f From 5cfc93d995cfd5cc7d1a469f3c1276c4884da2a2 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 11 Mar 2021 13:33:16 +0100 Subject: fix check_curl crash if http header contains leading spaces check_curl crashes when a (broken) http server returns invalid http header with leading spaces or double colons. This PR adds a fix and a test case for this. Signed-off-by: Sven Nierlein diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 2d69b31..ef96218 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -2037,7 +2037,7 @@ get_header_value (const struct phr_header* headers, const size_t nof_headers, co { int i; for( i = 0; i < nof_headers; i++ ) { - if( strncasecmp( header, headers[i].name, max( headers[i].name_len, 4 ) ) == 0 ) { + if(headers[i].name != NULL && strncasecmp( header, headers[i].name, max( headers[i].name_len, 4 ) ) == 0 ) { return strndup( headers[i].value, headers[i].value_len ); } } diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index 1afbe4b..0caad23 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -21,7 +21,7 @@ use FindBin qw($Bin); $ENV{'LC_TIME'} = "C"; -my $common_tests = 70; +my $common_tests = 72; my $ssl_only_tests = 8; # Check that all dependent modules are available eval "use HTTP::Daemon 6.01;"; @@ -188,6 +188,12 @@ sub run_server { $c->send_basic_header; $c->send_header('foo'); $c->send_crlf; + } elsif ($r->url->path eq "/header_broken_check") { + $c->send_basic_header; + $c->send_header('foo'); + print $c "Test1:: broken\n"; + print $c " Test2: leading whitespace\n"; + $c->send_crlf; } elsif ($r->url->path eq "/virtual_port") { # return sent Host header $c->send_basic_header; @@ -247,7 +253,7 @@ my $cmd; # advanced checks with virtual hostname and virtual port SKIP: { skip "libcurl version is smaller than $required_version", 6 unless $use_advanced_checks; - + # http without virtual port $cmd = "./$plugin -H $virtual_host -I 127.0.0.1 -p $port_http -u /virtual_port -r ^$virtual_host:$port_http\$"; $result = NPTest->testCmd( $cmd ); @@ -259,7 +265,7 @@ SKIP: { $result = NPTest->testCmd( $cmd ); is( $result->return_code, 0, $cmd); like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - \d+ bytes in [\d\.]+ second/', "Output correct: ".$result->output ); - + # http with virtual port (80) $cmd = "./$plugin -H $virtual_host:80 -I 127.0.0.1 -p $port_http -u /virtual_port -r ^$virtual_host\$"; $result = NPTest->testCmd( $cmd ); @@ -321,6 +327,10 @@ sub run_common_tests { is( $result->return_code, 2, "Missing header string check"); like( $result->output, qr%^HTTP CRITICAL: HTTP/1\.1 200 OK - header 'bar' not found on 'https?://127\.0\.0\.1:\d+/header_check'%, "Shows search string and location"); + $result = NPTest->testCmd( "$command -u /header_broken_check" ); + is( $result->return_code, 0, "header_check search for string"); + like( $result->output, '/^HTTP OK: HTTP/1.1 200 OK - 138 bytes in [\d\.]+ second/', "Output correct" ); + my $cmd; $cmd = "$command -u /slow"; $result = NPTest->testCmd( $cmd ); -- cgit v0.10-9-g596f From 2482950e267a752b37d696c10ea091dc62d6d8a7 Mon Sep 17 00:00:00 2001 From: Barak Shohat Date: Tue, 6 Apr 2021 16:35:20 +0300 Subject: Updated check_curl.c to display a specific human-readable error message where possible diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8f274c2..8cb2ff4 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -313,8 +313,8 @@ static char *string_statuscode (int major, int minor) /* assuming here HTTP/N with N>=4 */ snprintf (buf, sizeof (buf), "HTTP/%d", major); break; - } - + } + return buf; } @@ -662,7 +662,7 @@ check_http (void) /* Curl errors, result in critical Nagios state */ if (res != CURLE_OK) { snprintf (msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: cURL returned %d - %s"), - server_port, res, curl_easy_strerror(res)); + server_port, res, errbuf[0] ? errbuf : curl_easy_strerror(res)); die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); } diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index 4bff538..cc65f03 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -46,7 +46,7 @@ $res = NPTest->testCmd( ); cmp_ok( $res->return_code, '==', 2, "Webserver $host_nonresponsive not responding" ); # was CRITICAL only, but both check_curl and check_http print HTTP CRITICAL (puzzle?!) -cmp_ok( $res->output, 'eq', "HTTP CRITICAL - Invalid HTTP response received from host on port 80: cURL returned 28 - Timeout was reached", "Output OK"); +like( $res->output, "/HTTP CRITICAL - Invalid HTTP response received from host on port 80: cURL returned 28 - Connection timed out after/", "Output OK"); $res = NPTest->testCmd( "./$plugin $hostname_invalid -wt 1 -ct 2" @@ -56,7 +56,7 @@ cmp_ok( $res->return_code, '==', 2, "Webserver $hostname_invalid not valid" ); # On Debian, it is Name or service not known, on Darwin, it is No address associated with nodename # Is also possible to get a socket timeout if DNS is not responding fast enough # cURL gives us consistent strings from it's own 'lib/strerror.c' -like( $res->output, "/cURL returned 6 - Couldn't resolve host name/", "Output OK"); +like( $res->output, "/cURL returned 6 - Could not resolve host:/", "Output OK"); # host header checks $res = NPTest->testCmd("./$plugin -v -H $host_tcp_http"); -- cgit v0.10-9-g596f From 6993c216955a54845d98dc568534613334c0b545 Mon Sep 17 00:00:00 2001 From: Barak Shohat Date: Wed, 7 Apr 2021 12:34:46 +0300 Subject: Add an option to check_curl to verify the peer certificate & host using the system CA's diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8f274c2..19f80b7 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -195,6 +195,7 @@ int ssl_version = CURL_SSLVERSION_DEFAULT; char *client_cert = NULL; char *client_privkey = NULL; char *ca_cert = NULL; +int verify_peer_and_host = FALSE; int is_openssl_callback = FALSE; #if defined(HAVE_SSL) && defined(USE_OPENSSL) X509 *cert = NULL; @@ -489,9 +490,11 @@ check_http (void) if (client_privkey) handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_SSLKEY, client_privkey), "CURLOPT_SSLKEY"); if (ca_cert) { + handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert), "CURLOPT_CAINFO"); + } + if (ca_cert || verify_peer_and_host) { /* per default if we have a CA verify both the peer and the * hostname in the certificate, can be switched off later */ - handle_curl_option_return_code (curl_easy_setopt (curl, CURLOPT_CAINFO, ca_cert), "CURLOPT_CAINFO"); handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYPEER, 1), "CURLOPT_SSL_VERIFYPEER"); handle_curl_option_return_code (curl_easy_setopt( curl, CURLOPT_SSL_VERIFYHOST, 2), "CURLOPT_SSL_VERIFYHOST"); } else { @@ -1159,6 +1162,7 @@ process_arguments (int argc, char **argv) {"client-cert", required_argument, 0, 'J'}, {"private-key", required_argument, 0, 'K'}, {"ca-cert", required_argument, 0, CA_CERT_OPTION}, + {"verify-cert", no_argument, 0, 'D'}, {"useragent", required_argument, 0, 'A'}, {"header", required_argument, 0, 'k'}, {"no-body", no_argument, 0, 'N'}, @@ -1193,7 +1197,7 @@ process_arguments (int argc, char **argv) server_url = strdup(DEFAULT_SERVER_URL); while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:nlLS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:DnlLS::m:M:NE", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -1333,6 +1337,11 @@ process_arguments (int argc, char **argv) ca_cert = optarg; goto enable_ssl; #endif +#ifdef LIBCURL_FEATURE_SSL + case 'D': /* verify peer certificate & host */ + verify_peer_and_host = TRUE; + goto enable_ssl; +#endif case 'S': /* use SSL */ #ifdef LIBCURL_FEATURE_SSL enable_ssl: @@ -1703,6 +1712,8 @@ print_help (void) printf (" %s\n", _("matching the client certificate")); printf (" %s\n", "--ca-cert=FILE"); printf (" %s\n", _("CA certificate file to verify peer against")); + printf (" %s\n", "-D, --verify-cert"); + printf (" %s\n", _("Verify the peer's SSL certificate and hostname")); #endif printf (" %s\n", "-e, --expect=STRING"); @@ -1836,7 +1847,7 @@ print_usage (void) { printf ("%s\n", _("Usage:")); printf (" %s -H | -I [-u ] [-p ]\n",progname); - printf (" [-J ] [-K ] [--ca-cert ]\n"); + printf (" [-J ] [-K ] [--ca-cert ] [-D]\n"); printf (" [-w ] [-c ] [-t ] [-L] [-E] [-a auth]\n"); printf (" [-b proxy_auth] [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index 4bff538..55577ad 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -9,7 +9,7 @@ use Test::More; use POSIX qw/mktime strftime/; use NPTest; -plan tests => 57; +plan tests => 58; my $successOutput = '/OK.*HTTP.*second/'; @@ -94,6 +94,9 @@ SKIP: { $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:443 -S -p 443"); like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); + + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -D -p 443"); + like( $res->output, '/(^Host: '.$host_tls_http.'\s*$)|(cURL returned 60)/ms', "Host Header OK" ); }; SKIP: { -- cgit v0.10-9-g596f From f90aec83cb20263401ab620d07e4914355d9681d Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 8 Apr 2021 14:07:20 +0200 Subject: check_curl: Increase regexp limit (to 1024 as in check_http) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8125ee8..f900f16 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -117,7 +117,7 @@ typedef enum curlhelp_ssl_library { enum { REGS = 2, - MAX_RE_SIZE = 256 + MAX_RE_SIZE = 1024 }; #include "regex.h" regex_t preg; -- cgit v0.10-9-g596f From a6acea7941a2a5519ab49d13b5adf946a50b5ea5 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 8 Apr 2021 14:15:54 +0200 Subject: check_curl: make -C obvious (from check_http) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index f900f16..892300a 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1852,9 +1852,11 @@ print_usage (void) printf (" [-b proxy_auth] [-f ]\n"); printf (" [-e ] [-d string] [-s string] [-l] [-r | -R ]\n"); printf (" [-P string] [-m :] [-4|-6] [-N] [-M ]\n"); - printf (" [-A string] [-k string] [-S ] [--sni] [-C [,]]\n"); + printf (" [-A string] [-k string] [-S ] [--sni]\n"); printf (" [-T ] [-j method]\n"); printf (" [--http-version=]\n"); + printf (" %s -H | -I -C [,]\n",progname); + printf (" [-p ] [-t ] [-4|-6] [--sni]\n"); printf ("\n"); printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); -- cgit v0.10-9-g596f From 1debd29b573f4d81eeba4d7f78f797c348b231ce Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 8 Apr 2021 15:14:53 +0200 Subject: check_curl: make -C obvious (from check_http, part 2) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 892300a..8fc97f4 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1858,6 +1858,10 @@ print_usage (void) printf (" %s -H | -I -C [,]\n",progname); printf (" [-p ] [-t ] [-4|-6] [--sni]\n"); printf ("\n"); +#ifdef LIBCURL_FEATURE_SSL + printf ("%s\n", _("In the first form, make an HTTP request.")); + printf ("%s\n\n", _("In the second form, connect to the server and check the TLS certificate.")); +#endif printf ("%s\n", _("WARNING: check_curl is experimental. Please use")); printf ("%s\n\n", _("check_http if you need a stable version.")); } -- cgit v0.10-9-g596f From cd358cd08a6ddceece836788078ec96b5f8eb0c5 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 8 Apr 2021 20:39:48 +0200 Subject: check_curl: backported --show-body/-B to print body (from check_http) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 8fc97f4..99833f6 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -145,6 +145,7 @@ thresholds *thlds; char user_agent[DEFAULT_BUFFER_SIZE]; int verbose = 0; int show_extended_perfdata = FALSE; +int show_body = FALSE; int min_page_len = 0; int max_page_len = 0; int redir_depth = 0; @@ -792,7 +793,9 @@ GOT_FIRST_CERT: snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host: %s\n"), status_line.first_line); else snprintf(msg, DEFAULT_BUFFER_SIZE, _("Invalid HTTP response received from host on port %d: %s\n"), server_port, status_line.first_line); - die (STATE_CRITICAL, "HTTP CRITICAL - %s", msg); + die (STATE_CRITICAL, "HTTP CRITICAL - %s%s%s", msg, + show_body ? "\n" : "", + show_body ? body_buf.buf : ""); } if( server_expect_yn ) { @@ -921,13 +924,15 @@ GOT_FIRST_CERT: msg[strlen(msg)-3] = '\0'; /* TODO: separate _() msg and status code: die (result, "HTTP %s: %s\n", state_text(result), msg); */ - die (result, "HTTP %s: %s %d %s%s%s - %d bytes in %.3f second response time %s|%s\n", + die (result, "HTTP %s: %s %d %s%s%s - %d bytes in %.3f second response time %s|%s\n%s%s", state_text(result), string_statuscode (status_line.http_major, status_line.http_minor), status_line.http_code, status_line.msg, strlen(msg) > 0 ? " - " : "", msg, page_len, total_time, (display_html ? "" : ""), - perfstring); + perfstring, + (show_body ? body_buf.buf : ""), + (show_body ? "\n" : "") ); /* proper cleanup after die? */ curlhelp_free_statusline(&status_line); @@ -1173,6 +1178,7 @@ process_arguments (int argc, char **argv) {"use-ipv4", no_argument, 0, '4'}, {"use-ipv6", no_argument, 0, '6'}, {"extended-perfdata", no_argument, 0, 'E'}, + {"show-body", no_argument, 0, 'B'}, {"http-version", required_argument, 0, HTTP_VERSION_OPTION}, {0, 0, 0, 0} }; @@ -1197,7 +1203,7 @@ process_arguments (int argc, char **argv) server_url = strdup(DEFAULT_SERVER_URL); while (1) { - c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:DnlLS::m:M:NE", longopts, &option); + c = getopt_long (argc, argv, "Vvh46t:c:w:A:k:H:P:j:T:I:a:b:d:e:p:s:R:r:u:f:C:J:K:DnlLS::m:M:NEB", longopts, &option); if (c == -1 || c == EOF || c == 1) break; @@ -1545,6 +1551,9 @@ process_arguments (int argc, char **argv) case 'E': /* show extended perfdata */ show_extended_perfdata = TRUE; break; + case 'B': /* print body content after status line */ + show_body = TRUE; + break; case HTTP_VERSION_OPTION: curl_http_version = CURL_HTTP_VERSION_NONE; if (strcmp (optarg, "1.0") == 0) { @@ -1757,6 +1766,8 @@ print_help (void) printf (" %s\n", _("Any other tags to be sent in http header. Use multiple times for additional headers")); printf (" %s\n", "-E, --extended-perfdata"); printf (" %s\n", _("Print additional performance data")); + printf (" %s\n", "-B, --show-body"); + printf (" %s\n", _("Print body content below status line")); printf (" %s\n", "-L, --link"); printf (" %s\n", _("Wrap output in HTML link (obsoleted by urlize)")); printf (" %s\n", "-f, --onredirect="); -- cgit v0.10-9-g596f From f0ac7fcc7c40fab04c00fbbc8c091e89e77b0f74 Mon Sep 17 00:00:00 2001 From: Barak Shohat Date: Mon, 12 Apr 2021 19:06:27 +0300 Subject: check_curl: Fix bug where headers beginning with HTTP_ cause the status line parsing to fail. diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 99833f6..3e0a6f9 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1995,7 +1995,7 @@ curlhelp_parse_statusline (const char *buf, curlhelp_statusline *status_line) char *first_line_buf; /* find last start of a new header */ - start = strrstr2 (buf, "\r\nHTTP"); + start = strrstr2 (buf, "\r\nHTTP/"); if (start != NULL) { start += 2; buf = start; -- cgit v0.10-9-g596f From a4308b19135bdadf339163f7e127c628d987a0fc Mon Sep 17 00:00:00 2001 From: PhiBo Date: Wed, 28 Apr 2021 15:11:23 +0200 Subject: Add CodeQL checks Add initial github actions to perform CodeQL securtiy checks diff --git a/.github/workflows/codeql-analysis.yml b/.github/workflows/codeql-analysis.yml new file mode 100644 index 0000000..9de367e --- /dev/null +++ b/.github/workflows/codeql-analysis.yml @@ -0,0 +1,71 @@ +# For most projects, this workflow file will not need changing; you simply need +# to commit it to your repository. +# +# You may wish to alter this file to override the set of languages analyzed, +# or to provide custom queries or build logic. +# +# ******** NOTE ******** +# We have attempted to detect the languages in your repository. Please check +# the `language` matrix defined below to confirm you have the correct set of +# supported CodeQL languages. +# +name: "CodeQL" + +on: + push: + branches: [ master ] + pull_request: + # The branches below must be a subset of the branches above + branches: [ master ] + schedule: + - cron: '15 18 * * 0' + +jobs: + analyze: + name: Analyze + runs-on: ubuntu-latest + permissions: + actions: read + contents: read + security-events: write + + strategy: + fail-fast: false + matrix: + language: [ 'cpp' ] + # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python' ] + # Learn more: + # https://docs.github.com/en/free-pro-team@latest/github/finding-security-vulnerabilities-and-errors-in-your-code/configuring-code-scanning#changing-the-languages-that-are-analyzed + + steps: + - name: Checkout repository + uses: actions/checkout@v2 + + # Initializes the CodeQL tools for scanning. + - name: Initialize CodeQL + uses: github/codeql-action/init@v1 + with: + languages: ${{ matrix.language }} + # If you wish to specify custom queries, you can do so here or in a config file. + # By default, queries listed here will override any specified in a config file. + # Prefix the list here with "+" to use these queries and those in the config file. + # queries: ./path/to/local/query, your-org/your-repo/queries@main + + - name: Install packages + run: | + sudo apt-get install -y --no-install-recommends m4 gettext automake autoconf make build-essential + sudo apt-get install -y --no-install-recommends perl autotools-dev libdbi-dev libldap2-dev libpq-dev \ + libmysqlclient-dev libradcli-dev libkrb5-dev libdbi0-dev \ + libdbd-sqlite3 libssl-dev libcurl4-openssl-dev liburiparser-dev + + - name: Configure build + run: | + ./tools/setup + ./configure --enable-libtap + + - name: Build + run: | + make + + - name: Perform CodeQL Analysis + uses: github/codeql-action/analyze@v1 -- cgit v0.10-9-g596f From 444a3579b2168eda949943a060bddff9ec95fd99 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 12 Apr 2021 17:21:47 +0200 Subject: fix fping test in case of dns errors, fping returns an unknown and thats ok. diff --git a/plugins/t/check_fping.t b/plugins/t/check_fping.t index 342b0a7..03a6110 100644 --- a/plugins/t/check_fping.t +++ b/plugins/t/check_fping.t @@ -12,9 +12,6 @@ use vars qw($tests); BEGIN {$tests = 4; plan tests => $tests} -my $successOutput = '/^FPING OK - /'; -my $failureOutput = '/^FPING CRITICAL - /'; - my $host_responsive = getTestParameter("NP_HOST_RESPONSIVE", "The hostname of system responsive to network requests", "localhost"); my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); @@ -29,9 +26,9 @@ if( ! -x "./check_fping") { elsif ( $> != 0 && (!$fping || ! -u $fping)) { $t += skipMsg( "./check_fping", $tests ); } else { - $t += checkCmd( "./check_fping $host_responsive", 0, $successOutput ); - $t += checkCmd( "./check_fping $host_nonresponsive", [ 1, 2 ] ); - $t += checkCmd( "./check_fping $hostname_invalid", [ 1, 2 ] ); + $t += checkCmd( "./check_fping $host_responsive", 0, '/^FPING OK - /' ); + $t += checkCmd( "./check_fping $host_nonresponsive", 2, '/^FPING CRITICAL - /' ); + $t += checkCmd( "./check_fping $hostname_invalid", 3, '/^FPING UNKNOWN - /' ); } exit(0) if defined($Test::Harness::VERSION); -- cgit v0.10-9-g596f From fc71e3f9304ed51f3fd7ca544f38a30a590c8ba5 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 13 Apr 2021 09:15:12 +0200 Subject: migrate travis ci to github actions diff --git a/.github/NPTest.cache b/.github/NPTest.cache new file mode 100644 index 0000000..232305a --- /dev/null +++ b/.github/NPTest.cache @@ -0,0 +1,54 @@ +{ + 'NP_ALLOW_SUDO' => 'yes', + 'NP_DNS_SERVER' => '8.8.8.8', + 'NP_GOOD_NTP_SERVICE' => '', + 'NP_HOST_DHCP_RESPONSIVE' => '', + 'NP_HOST_HPJD_PORT_INVALID' => '161', + 'NP_HOST_HPJD_PORT_VALID' => '', + 'NP_HOSTNAME_INVALID_CIDR' => '130.133.8.39/30', + 'NP_HOSTNAME_INVALID' => 'nosuchhost', + 'NP_HOSTNAME_VALID_CIDR' => '130.133.8.41/30', + 'NP_HOSTNAME_VALID_IP' => '130.133.8.40', + 'NP_HOSTNAME_VALID' => 'monitoring-plugins.org', + 'NP_HOSTNAME_VALID_REVERSE' => 'orwell.monitoring-plugins.org.', + 'NP_HOST_NONRESPONSIVE' => '192.168.1.2', + 'NP_HOST_RESPONSIVE' => 'localhost', + 'NP_HOST_SMB' => '', + 'NP_HOST_SNMP' => '', + 'NP_HOST_TCP_FTP' => '', + 'NP_HOST_TCP_HPJD' => '', + 'NP_HOST_TCP_HTTP2' => 'test.monitoring-plugins.org', + 'NP_HOST_TCP_HTTP' => 'localhost', + 'NP_HOST_TCP_IMAP' => 'imap.web.de', + 'NP_HOST_TCP_JABBER' => 'jabber.org', + 'NP_HOST_TCP_LDAP' => 'localhost', + 'NP_HOST_TCP_POP' => 'pop.web.de', + 'NP_HOST_TCP_PROXY' => 'localhost', + 'NP_HOST_TCP_SMTP' => 'localhost', + 'NP_HOST_TCP_SMTP_NOTLS' => '', + 'NP_HOST_TCP_SMTP_TLS' => '', + 'NP_HOST_TLS_CERT' => 'localhost', + 'NP_HOST_TLS_HTTP' => 'localhost', + 'NP_HOST_UDP_TIME' => 'none', + 'NP_INTERNET_ACCESS' => 'yes', + 'NP_LDAP_BASE_DN' => 'dc=nodomain', + 'NP_MOUNTPOINT2_VALID' => '/media/ramdisk1', + 'NP_MOUNTPOINT_VALID' => '/', + 'NP_MYSQL_LOGIN_DETAILS' => '-u root -d test', + 'NP_MYSQL_SERVER' => 'localhost', + 'NP_MYSQL_SOCKET' => '/var/run/mysqld/mysqld.sock', + 'NP_MYSQL_WITH_SLAVE' => '', + 'NP_MYSQL_WITH_SLAVE_LOGIN' => '', + 'NP_NO_NTP_SERVICE' => 'localhost', + 'NP_PORT_TCP_PROXY' => '3128', + 'NP_SMB_SHARE' => '', + 'NP_SMB_SHARE_DENY' => '', + 'NP_SMB_SHARE_SPC' => '', + 'NP_SMB_VALID_USER' => '', + 'NP_SMB_VALID_USER_PASS' => '', + 'NP_SNMP_COMMUNITY' => '', + 'NP_SNMP_USER' => '', + 'NP_SSH_CONFIGFILE' => '~/.ssh/config', + 'NP_SSH_HOST' => 'localhost', + 'NP_SSH_IDENTITY' => '~/.ssh/id_rsa' +} diff --git a/.github/prepare_debian.sh b/.github/prepare_debian.sh new file mode 100755 index 0000000..4005320 --- /dev/null +++ b/.github/prepare_debian.sh @@ -0,0 +1,99 @@ +#!/bin/bash + +set -x +set -e + +export DEBIAN_FRONTEND=noninteractive + +apt-get update +apt-get -y install software-properties-common +if [ $(lsb_release -is) = "Debian" ]; then + apt-add-repository non-free + apt-get update +fi +apt-get -y install perl autotools-dev libdbi-dev libldap2-dev libpq-dev libradcli-dev libnet-snmp-perl procps +apt-get -y install libdbi0-dev libdbd-sqlite3 libssl-dev dnsutils snmp-mibs-downloader libsnmp-perl snmpd +apt-get -y install fping snmp netcat smbclient vsftpd apache2 ssl-cert postfix libhttp-daemon-ssl-perl +apt-get -y install libdbd-sybase-perl libnet-dns-perl +apt-get -y install slapd ldap-utils +apt-get -y install gcc make autoconf automake gettext +apt-get -y install faketime +apt-get -y install libmonitoring-plugin-perl +apt-get -y install libcurl4-openssl-dev +apt-get -y install liburiparser-dev +apt-get -y install squid +apt-get -y install openssh-server +apt-get -y install mariadb-server mariadb-client libmariadb-dev +apt-get -y install cron iputils-ping +apt-get -y install iproute2 + +# remove ipv6 interface from hosts +if [ $(ip addr show | grep "inet6 ::1" | wc -l) -eq "0" ]; then + sed '/^::1/d' /etc/hosts > /tmp/hosts + cp -f /tmp/hosts /etc/hosts +fi + +ip addr show + +cat /etc/hosts + + +# apache +a2enmod ssl +a2ensite default-ssl +make-ssl-cert generate-default-snakeoil --force-overwrite +service apache2 start + +# squid +cp tools/squid.conf /etc/squid/squid.conf +service squid start + +# mariadb +service mariadb start +mysql -e "create database IF NOT EXISTS test;" -uroot + +# ldap +sed -e 's/cn=admin,dc=nodomain/'$(/usr/sbin/slapcat|grep ^dn:|awk '{print $2}')'/' -i .github/NPTest.cache +service slapd start + +# sshd +ssh-keygen -t rsa -N "" -f ~/.ssh/id_rsa +cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys +service ssh start +sleep 1 +ssh-keyscan localhost >> ~/.ssh/known_hosts +touch ~/.ssh/config + +# start one login session, required for check_users +( ssh -n -tt root@localhost "top" < /dev/null >/dev/null 2>&1 & ) +sleep 1 +who +ssh root@localhost "top -b -n 1" + +# snmpd +for DIR in /usr/share/snmp/mibs /usr/share/mibs; do + rm -f $DIR/ietf/SNMPv2-PDU \ + $DIR/ietf/IPSEC-SPD-MIB \ + $DIR/ietf/IPATM-IPMC-MIB \ + $DIR/iana/IANA-IPPM-METRICS-REGISTRY-MIB +done +mkdir -p /var/lib/snmp/mib_indexes +sed -e 's/^agentaddress.*/agentaddress 127.0.0.1/' -i /etc/snmp/snmpd.conf +service snmpd start + +# start cron, will be used by check_nagios +cron + +# start postfix +service postfix start + +# start ftpd +service vsftpd start + +# hostname +sed "/NP_HOST_TLS_CERT/s/.*/'NP_HOST_TLS_CERT' => '$(hostname)',/" -i /src/.github/NPTest.cache + +# create some test files to lower inodes +for i in $(seq 10); do + touch /media/ramdisk2/test.$1 +done diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml new file mode 100644 index 0000000..4c3497d --- /dev/null +++ b/.github/workflows/test.yml @@ -0,0 +1,77 @@ +name: Test + +on: + push: + branches: + - '*' + pull_request: + +jobs: +# macos: +# name: Running tests on ${{ matrix.os }} +# strategy: +# fail-fast: false +# matrix: +# os: +# - macos-10.15 +# runs-on: ${{ matrix.os }} +# steps: +# +# - name: Git clone repository +# uses: actions/checkout@v2 +# #- name: Setup tmate session, see https://github.com/marketplace/actions/debugging-with-tmate +# # uses: mxschmitt/action-tmate@v3 +# - name: Prepare machine +# run: | +# brew install automake +# - name: Run the tests +# run: | +# tools/setup \ +# && ./configure --enable-libtap \ +# && make \ +# && make test + + linux: + runs-on: ubuntu-latest + name: Running tests on ${{ matrix.distro }} + strategy: + fail-fast: false + matrix: + distro: + #- 'debian:10' + - 'debian:testing' + #- 'ubuntu:20.10' + #- 'centos:7' + #- 'centos:8' + include: + #- distro: 'debian:10' + # prepare: .github/prepare_debian.sh + - distro: 'debian:testing' + prepare: .github/prepare_debian.sh + #- distro: 'ubuntu:20.10' + # prepare: .github/prepare_debian.sh + #- distro: 'centos:7' + # prepare: .github/prepare_centos.sh + #- distro: 'centos:8' + # prepare: .github/prepare_centos.sh + steps: + - name: Git clone repository + uses: actions/checkout@v2 + #- name: Setup tmate session, see https://github.com/marketplace/actions/debugging-with-tmate + # uses: mxschmitt/action-tmate@v3 + - name: Run the tests on ${{ matrix.distro }} + run: | + docker volume create --driver local --opt type=tmpfs --opt device=tmpfs --opt o=size=100m,uid=1000 tmp-vol + docker run \ + -e NPTEST_ACCEPTDEFAULT=1 \ + -e NPTEST_CACHE="/src/.github/NPTest.cache" \ + -w /src -v ${PWD}:/src \ + --tmpfs /media/ramdisk1 \ + --mount source=tmp-vol,destination=/src,target=/media/ramdisk2 \ + ${{ matrix.distro }} \ + /bin/sh -c '${{ matrix.prepare }} && \ + tools/setup && \ + ./configure --enable-libtap && \ + make && \ + make test' + docker volume rm tmp-vol diff --git a/.travis.yml b/.travis.yml deleted file mode 100644 index 3d9fe64..0000000 --- a/.travis.yml +++ /dev/null @@ -1,98 +0,0 @@ -sudo: required -dist: xenial -language: c - -env: - global: - # This is the encrypted COVERITY_SCAN_TOKEN, created via the "travis - # encrypt" command using the project repository's public key. - - secure: "ggJ9c/VfKcwtrwz/My+ne4My7D8g3qi3vz5Hh+yLiri0+oIXCy313ZD6ssIEY/5beQZEOnuHhBgBJd/Y3clSQNc2M9fRNc+wxOkIO992lgnY0MZJN3y9MLfpqUbTClhU9Fst0qXQqGpI6UI8yz1tj7yKi7DPrycJLRrjMpyTfyo=" - -matrix: - include: - - compiler: "gcc" - os: linux - env: - - PLATFORM=linux BITS=64 HOST=x86_64 - addons: - coverity_scan: - project: - name: "monitoring-plugins/monitoring-plugins" - description: "Monitoring Plugins" - notification_email: team@monitoring-plugins.org - build_command_prepend: tools/setup && ./configure - build_command: make - branch_pattern: coverity.* - - compiler: "clang" - os: linux - env: - - PLATFORM=linux BITS=64 HOST=x86_64 - -before_install: - # Trusty related fixed - # multiverse is no on trusty activated (https://github.com/travis-ci/travis-ci/issues/4979) - - sudo apt-get install -qq --no-install-recommends software-properties-common - - sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu/ trusty multiverse" && sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu/ trusty-updates multiverse" - # /etc/hosts has IPv6 hosts (https://github.com/travis-ci/travis-ci/issues/4978) - - sudo [ $(ip addr show | grep "inet6 ::1" | wc -l) -eq "0" ] || sudo sed -i '/^::1/d' /etc/hosts - # Trusty has running ntpd on localhost, but we don't like that for our tests - - "sudo killall -9 ntpd ||:" - # Trusty has no swap, lets create some - - sudo fallocate -l 20M /swapfile; sudo chmod 600 /swapfile; sudo mkswap /swapfile; sudo swapon /swapfile - - sudo apt-get update -qq - - sudo apt-get purge -qq gawk - -install: - - sudo apt-get install -qq --no-install-recommends perl autotools-dev libdbi-dev libldap2-dev libpq-dev libmysqlclient-dev libradcli-dev libkrb5-dev libnet-snmp-perl procps - - sudo apt-get install -qq --no-install-recommends libdbi0-dev libdbd-sqlite3 libssl-dev dnsutils snmp-mibs-downloader libsnmp-perl snmpd - - sudo apt-get install -qq --no-install-recommends fping snmp netcat smbclient fping pure-ftpd apache2 ssl-cert postfix libhttp-daemon-ssl-perl - - sudo apt-get install -qq --no-install-recommends libdbd-sybase-perl libnet-dns-perl - - sudo apt-get install -qq --no-install-recommends slapd ldap-utils - - sudo apt-get install -qq --no-install-recommends autoconf automake - - sudo apt-get install -qq --no-install-recommends faketime - - sudo apt-get install -qq --no-install-recommends libmonitoring-plugin-perl - - sudo apt-get install -qq --no-install-recommends libcurl4-openssl-dev - - sudo apt-get install -qq --no-install-recommends liburiparser-dev - - sudo apt-get install -qq --no-install-recommends squid - # Trusty related dependencies (not yet provided) - - test "$(dpkg -l | grep -E "mysql-(client|server)-[0-9].[0-9]" | grep -c ^ii)" -gt 0 || sudo apt-get install -qq --no-install-recommends mariadb-client mariadb-server - # enable ssl apache - - sudo a2enmod ssl - - sudo a2ensite default-ssl - - sudo make-ssl-cert generate-default-snakeoil --force-overwrite - - sudo service apache2 reload - - sudo cp tools/squid.conf /etc/squid/squid.conf - - sudo service squid reload - - sudo service mysql restart - -before_script: - # ensure we have a test database in place for tests - - mysql -e "create database IF NOT EXISTS test;" -uroot - # Detect LDAP configuration (seems volatile on trusty env) - - sed -e 's/cn=admin,dc=nodomain/'$(sudo /usr/sbin/slapcat|grep ^dn:|grep cn=|awk '{print $2}')'/' -i plugins/t/NPTest.cache.travis - - tools/setup - - ./configure --enable-libtap - - make - - export NPTEST_ACCEPTDEFAULT=1 - - export NPTEST_CACHE="$(pwd)/plugins/t/NPTest.cache.travis" - - ssh-keygen -t rsa -N "" -f ~/.ssh/id_rsa - - cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys - - ssh-keyscan localhost >> ~/.ssh/known_hosts - - touch ~/.ssh/config - - sudo rm -f /usr/share/mibs/ietf/SNMPv2-PDU /usr/share/mibs/ietf/IPSEC-SPD-MIB /usr/share/mibs/ietf/IPATM-IPMC-MIB /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB - - sudo mkdir -p /var/lib/snmp/mib_indexes - - sudo mkdir /media/ramdisk && sudo chmod 777 /media/ramdisk && sudo mount -t tmpfs -o size=20% none /media/ramdisk - - sed "/NP_HOST_TLS_CERT/s/.*/'NP_HOST_TLS_CERT' => '$(hostname)',/" -i $NPTEST_CACHE - -script: - - if [ "$COVERITY_SCAN_BRANCH" != 1 ]; then make test; fi - -notifications: - irc: - channels: - - "chat.freenode.net#Monitoring-Plugins" - on_success: change - on_failure: always - skip_join: true - email: - # - team@monitoring-plugins.org diff --git a/plugins/t/NPTest.cache.travis b/plugins/t/NPTest.cache.travis deleted file mode 100644 index 9b9f805..0000000 --- a/plugins/t/NPTest.cache.travis +++ /dev/null @@ -1,54 +0,0 @@ -{ - 'NP_ALLOW_SUDO' => 'yes', - 'NP_DNS_SERVER' => '8.8.8.8', - 'NP_GOOD_NTP_SERVICE' => '', - 'NP_HOST_DHCP_RESPONSIVE' => '', - 'NP_HOST_HPJD_PORT_INVALID' => '161', - 'NP_HOST_HPJD_PORT_VALID' => '', - 'NP_HOSTNAME_INVALID_CIDR' => '130.133.8.39/30', - 'NP_HOSTNAME_INVALID' => 'nosuchhost', - 'NP_HOSTNAME_VALID_CIDR' => '130.133.8.41/30', - 'NP_HOSTNAME_VALID_IP' => '130.133.8.40', - 'NP_HOSTNAME_VALID' => 'monitoring-plugins.org', - 'NP_HOSTNAME_VALID_REVERSE' => 'orwell.monitoring-plugins.org.', - 'NP_HOST_NONRESPONSIVE' => '10.0.0.1', - 'NP_HOST_RESPONSIVE' => 'localhost', - 'NP_HOST_SMB' => '', - 'NP_HOST_SNMP' => '', - 'NP_HOST_TCP_FTP' => '', - 'NP_HOST_TCP_HPJD' => '', - 'NP_HOST_TCP_HTTP2' => 'test.monitoring-plugins.org', - 'NP_HOST_TCP_HTTP' => 'localhost', - 'NP_HOST_TCP_IMAP' => 'imap.web.de', - 'NP_HOST_TCP_JABBER' => 'jabber.org', - 'NP_HOST_TCP_LDAP' => 'localhost', - 'NP_HOST_TCP_POP' => 'pop.web.de', - 'NP_HOST_TCP_PROXY' => 'localhost', - 'NP_HOST_TCP_SMTP' => 'localhost', - 'NP_HOST_TCP_SMTP_NOTLS' => '', - 'NP_HOST_TCP_SMTP_TLS' => '', - 'NP_HOST_TLS_CERT' => 'localhost, - 'NP_HOST_TLS_HTTP' => 'localhost', - 'NP_HOST_UDP_TIME' => 'none', - 'NP_INTERNET_ACCESS' => 'yes', - 'NP_LDAP_BASE_DN' => 'cn=admin,dc=nodomain', - 'NP_MOUNTPOINT2_VALID' => '/media/ramdisk', - 'NP_MOUNTPOINT_VALID' => '/', - 'NP_MYSQL_LOGIN_DETAILS' => '-u root -d test', - 'NP_MYSQL_SERVER' => 'localhost', - 'NP_MYSQL_SOCKET' => '/var/run/mysqld/mysqld.sock', - 'NP_MYSQL_WITH_SLAVE' => '', - 'NP_MYSQL_WITH_SLAVE_LOGIN' => '', - 'NP_NO_NTP_SERVICE' => 'localhost', - 'NP_PORT_TCP_PROXY' => '3128', - 'NP_SMB_SHARE' => '', - 'NP_SMB_SHARE_DENY' => '', - 'NP_SMB_SHARE_SPC' => '', - 'NP_SMB_VALID_USER' => '', - 'NP_SMB_VALID_USER_PASS' => '', - 'NP_SNMP_COMMUNITY' => '', - 'NP_SNMP_USER' => '', - 'NP_SSH_CONFIGFILE' => '~/.ssh/config', - 'NP_SSH_HOST' => 'localhost', - 'NP_SSH_IDENTITY' => '~/.ssh/id_rsa' -} -- cgit v0.10-9-g596f From 40e171b7cdb2262398728aa9b84e747a856d9c1f Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Fri, 30 Apr 2021 09:38:19 +0200 Subject: Attempt to fix check_users Signed-off-by: Jacob Hansen diff --git a/.github/prepare_debian.sh b/.github/prepare_debian.sh index 4005320..3693acc 100755 --- a/.github/prepare_debian.sh +++ b/.github/prepare_debian.sh @@ -65,10 +65,12 @@ ssh-keyscan localhost >> ~/.ssh/known_hosts touch ~/.ssh/config # start one login session, required for check_users -( ssh -n -tt root@localhost "top" < /dev/null >/dev/null 2>&1 & ) -sleep 1 -who -ssh root@localhost "top -b -n 1" +#( ssh -n -tt root@localhost "top" < /dev/null >/dev/null 2>&1 & ) +ssh -tt localhost /dev/null 2>/dev/null & +disown %1 +#sleep 1 +#who +#ssh root@localhost "top -b -n 1" # snmpd for DIR in /usr/share/snmp/mibs /usr/share/mibs; do -- cgit v0.10-9-g596f From 5ab03a70950cecf5fe4ab52a3c4f9b0f6ac98939 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Aksel=20Sj=C3=B6gren?= Date: Wed, 28 Apr 2021 15:48:20 +0200 Subject: Fix conditional tests for check_http, check_curl Set correct number of tests in skip- blocks to avoid the error "Bad plan. You planned 50 tests but ran 55" when run with/without /usr/bin/faketime and NP_INTERNET_ACCESS=yes/no. diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index a4f1dfb..4f4124b 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -84,7 +84,7 @@ like( $res->output, '/^Host: testhost:8001\s*$/ms', "Host Header OK" ); like( $res->output, '/CURLOPT_URL: http:\/\/'.$host_tcp_http.':80\//ms', "Url OK" ); SKIP: { - skip "No internet access", 3 if $internet_access eq "no"; + skip "No internet access", 4 if $internet_access eq "no"; $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -S"); like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); @@ -120,7 +120,7 @@ SKIP: { cmp_ok( $res->return_code, "==", 0, "And also when not found"); } SKIP: { - skip "No internet access", 16 if $internet_access eq "no"; + skip "No internet access", 28 if $internet_access eq "no"; $res = NPTest->testCmd( "./$plugin --ssl $host_tls_http" diff --git a/plugins/t/check_http.t b/plugins/t/check_http.t index e92681e..c137f7b 100644 --- a/plugins/t/check_http.t +++ b/plugins/t/check_http.t @@ -103,7 +103,7 @@ SKIP: { cmp_ok( $res->return_code, "==", 0, "And also when not found"); } SKIP: { - skip "No internet access", 16 if $internet_access eq "no"; + skip "No internet access", 23 if $internet_access eq "no"; $res = NPTest->testCmd( "./$plugin --ssl $host_tls_http" @@ -135,7 +135,7 @@ SKIP: { # run some certificate checks with faketime SKIP: { - skip "No faketime binary found", 12 if !$faketime; + skip "No faketime binary found", 7 if !$faketime; $res = NPTest->testCmd("LC_TIME=C TZ=UTC ./$plugin -C 1 $host_tls_http"); like($res->output, qr/OK - Certificate '$host_tls_cert' will expire on/, "Catch cert output"); is( $res->return_code, 0, "Catch cert output exit code" ); -- cgit v0.10-9-g596f From e712d5a6ef194845e815f0471589262bcb1cced4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Aksel=20Sj=C3=B6gren?= Date: Thu, 29 Apr 2021 15:04:19 +0200 Subject: Add test-debug for plugins-root Fixes "No rule to make target 'test-debug'" when running "make test-debug" in root dir. diff --git a/plugins-root/Makefile.am b/plugins-root/Makefile.am index a1ebb6d..7cd2675 100644 --- a/plugins-root/Makefile.am +++ b/plugins-root/Makefile.am @@ -37,6 +37,9 @@ TESTS = @PLUGIN_TEST@ test: perl -I $(top_builddir) -I $(top_srcdir) ../test.pl +test-debug: + NPTEST_DEBUG=1 HARNESS_VERBOSE=1 perl -I $(top_builddir) -I $(top_srcdir) ../test.pl + setuid_root_mode = ug=rx,u+s # /* Author Coreutils team - see ACKNOWLEDGEMENTS */ -- cgit v0.10-9-g596f From 39c162e594ec962eb338332624d3ac7474227a2b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Aksel=20Sj=C3=B6gren?= Date: Thu, 29 Apr 2021 15:58:50 +0200 Subject: Fix check_dhcp tests * try to use "/usr/sbin/ip" before "ifconfig" since the latter is obsolete on Linux to figure out interface to listen for DHCP messages. But keeping ifconfig method just in case. Without this, tests fail on boxes without ifconfig AND the correct interface named ethX. * amend possible failure responses, as check_dhcp might get a DHCPOFFER, but from an unexpected address - which happens if the box running tests are on a network with a DHCP server. diff --git a/plugins-root/t/check_dhcp.t b/plugins-root/t/check_dhcp.t index 222f454..ce62773 100644 --- a/plugins-root/t/check_dhcp.t +++ b/plugins-root/t/check_dhcp.t @@ -19,7 +19,7 @@ if ($allow_sudo eq "yes" or $> == 0) { my $sudo = $> == 0 ? '' : 'sudo'; my $successOutput = '/OK: Received \d+ DHCPOFFER\(s\), \d+ of 1 requested servers responded, max lease time = \d+ sec\./'; -my $failureOutput = '/CRITICAL: No DHCPOFFERs were received/'; +my $failureOutput = '/CRITICAL: (No DHCPOFFERs were received|Received \d+ DHCPOFFER\(s\), 0 of 1 requested servers responded, max lease time = \d+ sec\.)/'; my $invalidOutput = '/Invalid hostname/'; my $host_responsive = getTestParameter( "NP_HOST_DHCP_RESPONSIVE", @@ -36,7 +36,12 @@ my $hostname_invalid = getTestParameter( "NP_HOSTNAME_INVALID", # try to determince interface my $interface = ''; -if(`ifconfig -a 2>/dev/null` =~ m/^(e\w*\d+)/mx and $1 ne 'eth0') { + +# find interface used for default route +if (-x '/usr/sbin/ip' and `/usr/sbin/ip route get 1.1.1.1 2>/dev/null` =~ m/\sdev\s(\S+)/) { + $interface = "-i $1"; +} +elsif (`ifconfig -a 2>/dev/null` =~ m/^(e\w*\d+)/mx and $1 ne 'eth0') { $interface = ' -i '.$1; } -- cgit v0.10-9-g596f From de9f85c916db4515bd81f2a000d7fb57f8e0f46a Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Fri, 30 Apr 2021 12:33:52 +0200 Subject: Use openssl generated cert The SSL certificate generate using make-ssl-cert seems to not work well with a our plugins. Causing a "CN could not be found" error to be shown. Using an OpenSSL generated certifiticate, seems to work better. Signed-off-by: Jacob Hansen diff --git a/.github/prepare_debian.sh b/.github/prepare_debian.sh index 3693acc..a74f346 100755 --- a/.github/prepare_debian.sh +++ b/.github/prepare_debian.sh @@ -41,8 +41,12 @@ cat /etc/hosts # apache a2enmod ssl a2ensite default-ssl -make-ssl-cert generate-default-snakeoil --force-overwrite -service apache2 start +# replace snakeoil certs with openssl generated ones as the make-ssl-cert ones +# seems to cause problems with our plugins +rm /etc/ssl/certs/ssl-cert-snakeoil.pem +rm /etc/ssl/private/ssl-cert-snakeoil.key +openssl req -nodes -newkey rsa:2048 -x509 -sha256 -days 365 -nodes -keyout /etc/ssl/private/ssl-cert-snakeoil.key -out /etc/ssl/certs/ssl-cert-snakeoil.pem -subj "/C=GB/ST=London/L=London/O=Global Security/OU=IT Department/CN=$(hostname)" +service apache2 restart # squid cp tools/squid.conf /etc/squid/squid.conf -- cgit v0.10-9-g596f From ae2fe683e3a5e2254473777b0249efe66f24d26c Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Tue, 18 May 2021 15:19:43 +0200 Subject: check_curl.t: Adjust test to use -f curl It appears that `-f follow` doesn't work correctly in `check_curl` at the moment. Test adjusted to use `-f curl` instead. Issue for the above created: https://github.com/monitoring-plugins/monitoring-plugins/issues/1685 Signed-off-by: Jacob Hansen diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index 4f4124b..45ee533 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -193,8 +193,7 @@ SKIP: { ); cmp_ok( $res->return_code, "==", 0, "Can read https for www.e-paycobalt.com (uses AES certificate)" ); - - $res = NPTest->testCmd( "./$plugin -H www.mozilla.com -u /firefox -f follow" ); + $res = NPTest->testCmd( "./$plugin -H www.mozilla.com -u /firefox -f curl" ); is( $res->return_code, 0, "Redirection based on location is okay"); $res = NPTest->testCmd( "./$plugin -H www.mozilla.com --extended-perfdata" ); -- cgit v0.10-9-g596f From 227369bb3bec2a44ebece952a9085bfb032a7a0e Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Wed, 19 May 2021 13:12:29 +0200 Subject: Disable IPv6 in tests Docker doesn't seem to have a working IPv6 stack by default. For now disable IPv6 tests. Signed-off-by: Jacob Hansen diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml index 4c3497d..06cc441 100644 --- a/.github/workflows/test.yml +++ b/.github/workflows/test.yml @@ -71,7 +71,7 @@ jobs: ${{ matrix.distro }} \ /bin/sh -c '${{ matrix.prepare }} && \ tools/setup && \ - ./configure --enable-libtap && \ + ./configure --enable-libtap --with-ipv6=no && \ make && \ make test' docker volume rm tmp-vol -- cgit v0.10-9-g596f From 0bbcb60f02d6f78561f684adb0294870a3522e4f Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Wed, 19 May 2021 13:13:47 +0200 Subject: Refactor check_fping * Set correct amount of tests based on conditionals. * When running the test as non-root, we would previously check is the setuid bit is set. This doesn't seem to be needed, so just check if the binary is executable for the user running the test. * Use cmp_ok to check if tests succeeds rather than couting. Signed-off-by: Jacob Hansen diff --git a/plugins/t/check_fping.t b/plugins/t/check_fping.t index 03a6110..67b357b 100644 --- a/plugins/t/check_fping.t +++ b/plugins/t/check_fping.t @@ -5,31 +5,30 @@ # use strict; -use Test; +use Test::More; use NPTest; -use vars qw($tests); - -BEGIN {$tests = 4; plan tests => $tests} - my $host_responsive = getTestParameter("NP_HOST_RESPONSIVE", "The hostname of system responsive to network requests", "localhost"); my $host_nonresponsive = getTestParameter("NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", "10.0.0.1"); my $hostname_invalid = getTestParameter("NP_HOSTNAME_INVALID", "An invalid (not known to DNS) hostname", "nosuchhost"); -my $t; +my $res; my $fping = qx(which fping 2> /dev/null); chomp($fping); if( ! -x "./check_fping") { - $t += skipMissingCmd( "./check_fping", $tests ); + plan skip_all => "check_fping not found, skipping tests"; } -elsif ( $> != 0 && (!$fping || ! -u $fping)) { - $t += skipMsg( "./check_fping", $tests ); +elsif ( !$fping || !-x $fping ) { + plan skip_all => "fping not found or cannot be executed, skipping tests"; } else { - $t += checkCmd( "./check_fping $host_responsive", 0, '/^FPING OK - /' ); - $t += checkCmd( "./check_fping $host_nonresponsive", 2, '/^FPING CRITICAL - /' ); - $t += checkCmd( "./check_fping $hostname_invalid", 3, '/^FPING UNKNOWN - /' ); -} + plan tests => 3; + $res = NPTest->testCmd( "./check_fping $host_responsive" ); + cmp_ok( $res->return_code, '==', 0, "Responsive host returns OK"); -exit(0) if defined($Test::Harness::VERSION); -exit($tests - $t); + $res = NPTest->testCmd( "./check_fping $host_nonresponsive" ); + cmp_ok( $res->return_code, '==', 2, "Non-Responsive host returns Critical"); + + $res = NPTest->testCmd( "./check_fping $hostname_invalid" ); + cmp_ok( $res->return_code, '==', 3, "Invalid host returns Unknown"); +} -- cgit v0.10-9-g596f From 226469f970568340d27d90499199823b67b9e3dc Mon Sep 17 00:00:00 2001 From: Jacob Hansen Date: Wed, 19 May 2021 13:59:52 +0200 Subject: Prune container and volumes Rather than manully removing the tmpfs volume. Signed-off-by: Jacob Hansen diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml index 06cc441..3e46795 100644 --- a/.github/workflows/test.yml +++ b/.github/workflows/test.yml @@ -74,4 +74,5 @@ jobs: ./configure --enable-libtap --with-ipv6=no && \ make && \ make test' - docker volume rm tmp-vol + docker container prune -f + docker volume prune -f -- cgit v0.10-9-g596f From 6344d29143bfd80d511e6c2d4bd39b9f58e03f14 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 20 May 2021 17:49:46 +0200 Subject: remove useless comments Signed-off-by: Sven Nierlein diff --git a/.github/prepare_debian.sh b/.github/prepare_debian.sh index a74f346..c68b9f5 100755 --- a/.github/prepare_debian.sh +++ b/.github/prepare_debian.sh @@ -69,12 +69,8 @@ ssh-keyscan localhost >> ~/.ssh/known_hosts touch ~/.ssh/config # start one login session, required for check_users -#( ssh -n -tt root@localhost "top" < /dev/null >/dev/null 2>&1 & ) ssh -tt localhost /dev/null 2>/dev/null & disown %1 -#sleep 1 -#who -#ssh root@localhost "top -b -n 1" # snmpd for DIR in /usr/share/snmp/mibs /usr/share/mibs; do diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml index 3e46795..512d28e 100644 --- a/.github/workflows/test.yml +++ b/.github/workflows/test.yml @@ -8,29 +8,7 @@ on: jobs: # macos: -# name: Running tests on ${{ matrix.os }} -# strategy: -# fail-fast: false -# matrix: -# os: -# - macos-10.15 -# runs-on: ${{ matrix.os }} -# steps: -# -# - name: Git clone repository -# uses: actions/checkout@v2 -# #- name: Setup tmate session, see https://github.com/marketplace/actions/debugging-with-tmate -# # uses: mxschmitt/action-tmate@v3 -# - name: Prepare machine -# run: | -# brew install automake -# - name: Run the tests -# run: | -# tools/setup \ -# && ./configure --enable-libtap \ -# && make \ -# && make test - +# ... linux: runs-on: ubuntu-latest name: Running tests on ${{ matrix.distro }} @@ -38,22 +16,12 @@ jobs: fail-fast: false matrix: distro: - #- 'debian:10' - 'debian:testing' - #- 'ubuntu:20.10' - #- 'centos:7' - #- 'centos:8' + #... include: - #- distro: 'debian:10' - # prepare: .github/prepare_debian.sh - distro: 'debian:testing' prepare: .github/prepare_debian.sh - #- distro: 'ubuntu:20.10' - # prepare: .github/prepare_debian.sh - #- distro: 'centos:7' - # prepare: .github/prepare_centos.sh - #- distro: 'centos:8' - # prepare: .github/prepare_centos.sh + #... steps: - name: Git clone repository uses: actions/checkout@v2 -- cgit v0.10-9-g596f From eb75d847ae31a86768b06926bc2323f7c16f07b9 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 20 May 2021 18:04:49 +0200 Subject: tests: increase startup sleep github action might fail from to time otherwise diff --git a/plugins/tests/check_curl.t b/plugins/tests/check_curl.t index 0caad23..29cb03f 100755 --- a/plugins/tests/check_curl.t +++ b/plugins/tests/check_curl.t @@ -126,8 +126,6 @@ if ($pid) { exit; } } - # give our webservers some time to startup - sleep(1); } else { # Child #print "child\n"; @@ -140,6 +138,9 @@ if ($pid) { exit; } +# give our webservers some time to startup +sleep(3); + # Run the same server on http and https sub run_server { my $d = shift; diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index 2f051fa..0f56950 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -102,8 +102,6 @@ if ($pid) { exit; } } - # give our webservers some time to startup - sleep(1); } else { # Child #print "child\n"; @@ -116,6 +114,9 @@ if ($pid) { exit; } +# give our webservers some time to startup +sleep(3); + # Run the same server on http and https sub run_server { my $d = shift; -- cgit v0.10-9-g596f From b428cc17f75682465e6f1e59b32fdec02b87ceac Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Thu, 20 May 2021 20:57:59 +0200 Subject: tests: ignore sigpipes in https test daemon check_http closes the connection after checking the certificate with -C. This leads to sigpipe errors when the ssl daemon wants to send a response and the daemon quits which makes the subsequent tests fail. diff --git a/plugins/tests/check_http.t b/plugins/tests/check_http.t index 0f56950..188f5e7 100755 --- a/plugins/tests/check_http.t +++ b/plugins/tests/check_http.t @@ -91,6 +91,8 @@ if ($pid) { exit; } } else { + # closing the connection after -C cert checks make the daemon exit with a sigpipe otherwise + local $SIG{'PIPE'} = 'IGNORE'; my $d = HTTP::Daemon::SSL->new( LocalPort => $port_https, LocalAddr => "127.0.0.1", @@ -415,22 +417,24 @@ sub run_common_tests { # stickyport - on full urlS port is set back to 80 otherwise $cmd = "$command -f stickyport -u /redir_external -t 5 -s redirected"; + alarm(2); eval { local $SIG{ALRM} = sub { die "alarm\n" }; - alarm(2); $result = NPTest->testCmd( $cmd ); - alarm(0); }; + }; isnt( $@, "alarm\n", $cmd ); + alarm(0); is( $result->return_code, 0, $cmd ); # Let's hope there won't be any web server on :80 returning "redirected"! $cmd = "$command -f sticky -u /redir_external -t 5 -s redirected"; + alarm(2); eval { local $SIG{ALRM} = sub { die "alarm\n" }; - alarm(2); $result = NPTest->testCmd( $cmd ); - alarm(0); }; + }; isnt( $@, "alarm\n", $cmd ); + alarm(0); isnt( $result->return_code, 0, $cmd ); # Test an external address - timeout -- cgit v0.10-9-g596f From 63cb7ecfcf8d5b6c9f2be704eee7fa7cd9216f88 Mon Sep 17 00:00:00 2001 From: Barak Shohat Date: Mon, 24 May 2021 13:42:43 +0300 Subject: check_curl.c: bugfix: verify certificates option should not force SSL to be used diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3e0a6f9..d29db0a 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1346,7 +1346,7 @@ process_arguments (int argc, char **argv) #ifdef LIBCURL_FEATURE_SSL case 'D': /* verify peer certificate & host */ verify_peer_and_host = TRUE; - goto enable_ssl; + break; #endif case 'S': /* use SSL */ #ifdef LIBCURL_FEATURE_SSL diff --git a/plugins/t/check_curl.t b/plugins/t/check_curl.t index 45ee533..ada6a04 100644 --- a/plugins/t/check_curl.t +++ b/plugins/t/check_curl.t @@ -95,7 +95,7 @@ SKIP: { $res = NPTest->testCmd("./$plugin -v -H $host_tls_http:443 -S -p 443"); like( $res->output, '/^Host: '.$host_tls_http.'\s*$/ms', "Host Header OK" ); - $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -D -p 443"); + $res = NPTest->testCmd("./$plugin -v -H $host_tls_http -D -S -p 443"); like( $res->output, '/(^Host: '.$host_tls_http.'\s*$)|(cURL returned 60)/ms', "Host Header OK" ); }; -- cgit v0.10-9-g596f From beb609ffcf8c24c133f59829e0d3d82102661b82 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 27 May 2021 15:32:08 +0200 Subject: check_curl: - added verbose output in verify_callback - pin refcounting for certs (avoid subject extraction error when checking certs in is_openssl_callback mode) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 3e0a6f9..59e398b 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -285,6 +285,18 @@ int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) * TODO: is the last certificate always the server certificate? */ cert = X509_STORE_CTX_get_current_cert(x509_ctx); + X509_up_ref(cert); + if (verbose>=2) { + puts("* SSL verify callback with certificate:"); + X509_NAME *subject, *issuer; + printf("* issuer:\n"); + issuer = X509_get_issuer_name( cert ); + X509_NAME_print_ex_fp(stdout, issuer, 5, XN_FLAG_MULTILINE); + printf("* curl verify_callback:\n* subject:\n"); + subject = X509_get_subject_name( cert ); + X509_NAME_print_ex_fp(stdout, subject, 5, XN_FLAG_MULTILINE); + puts(""); + } return 1; } -- cgit v0.10-9-g596f From 20e9451fadb452636bc4b395fcb6aaf93a477c23 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 24 Jun 2021 11:02:28 +0200 Subject: added option --enable-automatic-decompression diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 59e398b..d4442f5 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -206,6 +206,7 @@ int maximum_age = -1; int address_family = AF_UNSPEC; curlhelp_ssl_library ssl_library = CURLHELP_SSL_LIBRARY_UNKNOWN; int curl_http_version = CURL_HTTP_VERSION_NONE; +int automatic_decompression = FALSE; int process_arguments (int, char**); void handle_curl_option_return_code (CURLcode res, const char* option); @@ -383,6 +384,13 @@ check_http (void) /* print everything on stdout like check_http would do */ handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_STDERR, stdout), "CURLOPT_STDERR"); + if (automatic_decompression) +#if LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 6) + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_ACCEPT_ENCODING, ""), "CURLOPT_ACCEPT_ENCODING"); +#else + handle_curl_option_return_code (curl_easy_setopt(curl, CURLOPT_ENCODING, ""), "CURLOPT_ENCODING"); +#endif /* LIBCURL_VERSION_NUM >= MAKE_LIBCURL_VERSION(7, 21, 6) */ + /* initialize buffer for body of the answer */ if (curlhelp_initwritebuffer(&body_buf) < 0) die (STATE_UNKNOWN, "HTTP CRITICAL - out of memory allocating buffer for body\n"); @@ -1149,7 +1157,8 @@ process_arguments (int argc, char **argv) INVERT_REGEX = CHAR_MAX + 1, SNI_OPTION, CA_CERT_OPTION, - HTTP_VERSION_OPTION + HTTP_VERSION_OPTION, + AUTOMATIC_DECOMPRESSION }; int option = 0; @@ -1192,6 +1201,7 @@ process_arguments (int argc, char **argv) {"extended-perfdata", no_argument, 0, 'E'}, {"show-body", no_argument, 0, 'B'}, {"http-version", required_argument, 0, HTTP_VERSION_OPTION}, + {"enable-automatic-decompression", no_argument, 0, AUTOMATIC_DECOMPRESSION}, {0, 0, 0, 0} }; @@ -1583,6 +1593,9 @@ process_arguments (int argc, char **argv) exit (STATE_WARNING); } break; + case AUTOMATIC_DECOMPRESSION: + automatic_decompression = TRUE; + break; case '?': /* print short usage statement if args not parsable */ usage5 (); @@ -1793,6 +1806,8 @@ print_help (void) printf (" %s\n", "--http-version=VERSION"); printf (" %s\n", _("Connect via specific HTTP protocol.")); printf (" %s\n", _("1.0 = HTTP/1.0, 1.1 = HTTP/1.1, 2.0 = HTTP/2 (HTTP/2 will fail without -S)")); + printf (" %s\n", "--enable-automatic-decompression"); + printf (" %s\n", _("Enable automatic decompression of body (CURLOPT_ACCEPT_ENCODING).")); printf ("\n"); printf (UT_WARN_CRIT); -- cgit v0.10-9-g596f From a1af8be9781ccdf36087a9e42fa18cfd468f1401 Mon Sep 17 00:00:00 2001 From: Daniel Uhlmann Date: Thu, 24 Jun 2021 11:37:14 +0200 Subject: changed 'STATE_CRITICAL' to 'STATE_WARNING' for infinite loop diff --git a/plugins/check_http.c b/plugins/check_http.c index 0b71266..34fb4f0 100644 --- a/plugins/check_http.c +++ b/plugins/check_http.c @@ -1453,8 +1453,8 @@ redir (char *pos, char *status_line) !strncmp(server_address, addr, MAX_IPV4_HOSTLENGTH) && (host_name && !strncmp(host_name, addr, MAX_IPV4_HOSTLENGTH)) && !strcmp(server_url, url)) - die (STATE_WARNING, - _("HTTP WARNING - redirection creates an infinite loop - %s://%s:%d%s%s\n"), + die (STATE_CRITICAL, + _("HTTP CRITICAL - redirection creates an infinite loop - %s://%s:%d%s%s\n"), type, addr, i, url, (display_html ? "" : "")); strcpy (server_type, type); -- cgit v0.10-9-g596f From 0b6838ffcaf372df419059771dd42f1bd69644c0 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Thu, 24 Jun 2021 17:08:20 +0000 Subject: fix for missing X509_up_ref on old systems with only OpenSSL 1.0 diff --git a/plugins/check_curl.c b/plugins/check_curl.c index d4442f5..daf64b0 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -55,6 +55,10 @@ const char *email = "devel@monitoring-plugins.org"; #include +#if defined(HAVE_SSL) && defined(USE_OPENSSL) +#include +#endif + #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) #define DEFAULT_BUFFER_SIZE 2048 @@ -286,7 +290,9 @@ int verify_callback(int preverify_ok, X509_STORE_CTX *x509_ctx) * TODO: is the last certificate always the server certificate? */ cert = X509_STORE_CTX_get_current_cert(x509_ctx); +#if OPENSSL_VERSION_NUMBER >= 0x10100000L X509_up_ref(cert); +#endif if (verbose>=2) { puts("* SSL verify callback with certificate:"); X509_NAME *subject, *issuer; -- cgit v0.10-9-g596f From 6e5ee70d07c0a8515acdc3ad52716285a4b7f77b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Fri, 25 Jun 2021 12:12:48 +0200 Subject: Let ssh decide if a host is valid, enables usage of ssh .config file diff --git a/plugins/check_by_ssh.c b/plugins/check_by_ssh.c index 13d8bc3..485bf3b 100644 --- a/plugins/check_by_ssh.c +++ b/plugins/check_by_ssh.c @@ -230,7 +230,6 @@ process_arguments (int argc, char **argv) timeout_interval = atoi (optarg); break; case 'H': /* host */ - host_or_die(optarg); hostname = optarg; break; case 'p': /* port number */ @@ -329,7 +328,6 @@ process_arguments (int argc, char **argv) if (c <= argc) { die (STATE_UNKNOWN, _("%s: You must provide a host name\n"), progname); } - host_or_die(argv[c]); hostname = argv[c++]; } -- cgit v0.10-9-g596f From 3abcf83af41af9e56382b8e93a48d8d3ce1f18e8 Mon Sep 17 00:00:00 2001 From: rincewind Date: Fri, 2 Jul 2021 10:37:35 +0200 Subject: Remove modified note, since this is a git repository diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh index d28c8d0..4330235 100755 --- a/plugins-scripts/check_log.sh +++ b/plugins-scripts/check_log.sh @@ -1,8 +1,7 @@ #!/bin/sh # # Log file pattern detector plugin for monitoring -# Written by Ethan Galstad (nagios@nagios.org) -# Last Modified: 07-31-1999 +# Written originally by Ethan Galstad (nagios@nagios.org) # # Usage: ./check_log # -- cgit v0.10-9-g596f From 14e1d7f6af409c28dab4732357a2b355a1ada85a Mon Sep 17 00:00:00 2001 From: rincewind Date: Fri, 2 Jul 2021 17:39:47 +0200 Subject: Apply shellcheck diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh index 4330235..8a79704 100755 --- a/plugins-scripts/check_log.sh +++ b/plugins-scripts/check_log.sh @@ -59,11 +59,11 @@ PATH="@TRUSTED_PATH@" export PATH -PROGNAME=`basename $0` -PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'` +PROGNAME=$(basename "$0") +PROGPATH=$(echo "$0" | sed -e 's,[\\/][^\\/][^\\/]*$,,') REVISION="@NP_VERSION@" -. $PROGPATH/utils.sh +. "$PROGPATH"/utils.sh print_usage() { echo "Usage: $PROGNAME -F logfile -O oldlog -q query" @@ -72,7 +72,7 @@ print_usage() { } print_help() { - print_revision $PROGNAME $REVISION + print_revision "$PROGNAME" $REVISION echo "" print_usage echo "" @@ -86,7 +86,7 @@ print_help() { if [ $# -lt 1 ]; then print_usage - exit $STATE_UNKNOWN + exit "$STATE_UNKNOWN" fi # Grab the command line arguments @@ -99,19 +99,19 @@ while test -n "$1"; do case "$1" in --help) print_help - exit $STATE_OK + exit "$STATE_OK" ;; -h) print_help - exit $STATE_OK + exit "$STATE_OK" ;; --version) - print_revision $PROGNAME $REVISION - exit $STATE_OK + print_revision "$PROGNAME" $REVISION + exit "$STATE_OK" ;; -V) - print_revision $PROGNAME $REVISION - exit $STATE_OK + print_revision "$PROGNAME" $REVISION + exit "$STATE_OK" ;; --filename) logfile=$2 @@ -148,7 +148,7 @@ while test -n "$1"; do *) echo "Unknown argument: $1" print_usage - exit $STATE_UNKNOWN + exit "$STATE_UNKNOWN" ;; esac shift @@ -156,22 +156,22 @@ done # If the source log file doesn't exist, exit -if [ ! -e $logfile ]; then +if [ ! -e "$logfile" ]; then echo "Log check error: Log file $logfile does not exist!" - exit $STATE_UNKNOWN -elif [ ! -r $logfile ] ; then + exit "$STATE_UNKNOWN" +elif [ ! -r "$logfile" ] ; then echo "Log check error: Log file $logfile is not readable!" - exit $STATE_UNKNOWN + exit "$STATE_UNKNOWN" fi # If the old log file doesn't exist, this must be the first time # we're running this test, so copy the original log file over to # the old diff file and exit -if [ ! -e $oldlog ]; then - cat $logfile > $oldlog +if [ ! -e "$oldlog" ]; then + cat "$logfile" > "$oldlog" echo "Log check data initialized..." - exit $STATE_OK + exit "$STATE_OK" fi # The old log file exists, so compare it to the original log now @@ -179,24 +179,24 @@ fi # The temporary file that the script should use while # processing the log file. if [ -x /bin/mktemp ]; then - tempdiff=`/bin/mktemp /tmp/check_log.XXXXXXXXXX` + tempdiff=$(/bin/mktemp /tmp/check_log.XXXXXXXXXX) else - tempdiff=`/bin/date '+%H%M%S'` + tempdiff=$(/bin/date '+%H%M%S') tempdiff="/tmp/check_log.${tempdiff}" - touch $tempdiff - chmod 600 $tempdiff + touch "$tempdiff" + chmod 600 "$tempdiff" fi -diff $logfile $oldlog | grep -v "^>" > $tempdiff +diff "$logfile" "$oldlog" | grep -v "^>" > "$tempdiff" # Count the number of matching log entries we have -count=`grep -c "$query" $tempdiff` +count=$(grep -c "$query" "$tempdiff") # Get the last matching entry in the diff file -lastentry=`grep "$query" $tempdiff | tail -1` +lastentry=$(grep "$query" "$tempdiff" | tail -1) -rm -f $tempdiff -cat $logfile > $oldlog +rm -f "$tempdiff" +cat "$logfile" > "$oldlog" if [ "$count" = "0" ]; then # no matches, exit with no error echo "Log check ok - 0 pattern matches found" @@ -206,4 +206,4 @@ else # Print total matche count and the last entry we found exitstatus=$STATE_CRITICAL fi -exit $exitstatus +exit "$exitstatus" -- cgit v0.10-9-g596f From c2aa1a5fa2dd96c7186704901d33721a63b9cd03 Mon Sep 17 00:00:00 2001 From: rincewind Date: Fri, 2 Jul 2021 18:01:47 +0200 Subject: Add extended and perl regex diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh index 8a79704..6e9fbca 100755 --- a/plugins-scripts/check_log.sh +++ b/plugins-scripts/check_log.sh @@ -145,6 +145,22 @@ while test -n "$1"; do exitstatus=$2 shift ;; + --extended-regex) + ERE=1 + shift + ;; + -e) + ERE=1 + shift + ;; + --perl-regex) + PRE=1 + shift + ;; + -p) + PRE=1 + shift + ;; *) echo "Unknown argument: $1" print_usage @@ -154,6 +170,20 @@ while test -n "$1"; do shift done +# Parameter sanity check +if [ $ERE ] && [ $PRE ] ; then + echo "Can not use extended and perl regex at the same time" + exit "$STATE_UNKNOWN" +fi + +if [ $ERE ]; then + GREP="grep -E" +fi + +if [ $PRE ]; then + GREP="grep -P" +fi + # If the source log file doesn't exist, exit if [ ! -e "$logfile" ]; then @@ -190,10 +220,10 @@ fi diff "$logfile" "$oldlog" | grep -v "^>" > "$tempdiff" # Count the number of matching log entries we have -count=$(grep -c "$query" "$tempdiff") +count=$($GREP -c "$query" "$tempdiff") # Get the last matching entry in the diff file -lastentry=$(grep "$query" "$tempdiff" | tail -1) +lastentry=$($GREP "$query" "$tempdiff" | tail -1) rm -f "$tempdiff" cat "$logfile" > "$oldlog" -- cgit v0.10-9-g596f From 53b77dee91f780b4d78839f881c642189b829e3c Mon Sep 17 00:00:00 2001 From: rincewind Date: Fri, 2 Jul 2021 18:38:12 +0200 Subject: Add -a option to print all matching lines and -p and -e options for perl and extended RE diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh index 6e9fbca..8af07b5 100755 --- a/plugins-scripts/check_log.sh +++ b/plugins-scripts/check_log.sh @@ -69,6 +69,11 @@ print_usage() { echo "Usage: $PROGNAME -F logfile -O oldlog -q query" echo "Usage: $PROGNAME --help" echo "Usage: $PROGNAME --version" + echo "" + echo "Other parameters:" + echo " -a|--all : Print all matching lines" + echo " -p|--perl-regex : Use perl style regular expressions in the query" + echo " -e|--extended-regex : Use extended style regular expressions in the query (not necessary for GNU grep)" } print_help() { @@ -115,35 +120,35 @@ while test -n "$1"; do ;; --filename) logfile=$2 - shift + shift 2 ;; -F) logfile=$2 - shift + shift 2 ;; --oldlog) oldlog=$2 - shift + shift 2 ;; -O) oldlog=$2 - shift + shift 2 ;; --query) query=$2 - shift + shift 2 ;; -q) query=$2 - shift + shift 2 ;; -x) exitstatus=$2 - shift + shift 2 ;; --exitstatus) exitstatus=$2 - shift + shift 2 ;; --extended-regex) ERE=1 @@ -161,13 +166,20 @@ while test -n "$1"; do PRE=1 shift ;; + --all) + ALL=1 + shift + ;; + -a) + ALL=1 + shift + ;; *) echo "Unknown argument: $1" print_usage exit "$STATE_UNKNOWN" ;; esac - shift done # Parameter sanity check @@ -176,6 +188,8 @@ if [ $ERE ] && [ $PRE ] ; then exit "$STATE_UNKNOWN" fi +GREP="grep" + if [ $ERE ]; then GREP="grep -E" fi @@ -219,11 +233,20 @@ fi diff "$logfile" "$oldlog" | grep -v "^>" > "$tempdiff" -# Count the number of matching log entries we have -count=$($GREP -c "$query" "$tempdiff") +if [ $ALL ]; then + # Get the last matching entry in the diff file + entry=$($GREP "$query" "$tempdiff") -# Get the last matching entry in the diff file -lastentry=$($GREP "$query" "$tempdiff" | tail -1) + # Count the number of matching log entries we have + count=$(echo "$entry" | wc -l) + +else + # Count the number of matching log entries we have + count=$($GREP -c "$query" "$tempdiff") + + # Get the last matching entry in the diff file + entry=$($GREP "$query" "$tempdiff" | tail -1) +fi rm -f "$tempdiff" cat "$logfile" > "$oldlog" @@ -232,7 +255,7 @@ if [ "$count" = "0" ]; then # no matches, exit with no error echo "Log check ok - 0 pattern matches found" exitstatus=$STATE_OK else # Print total matche count and the last entry we found - echo "($count) $lastentry" + echo "($count) $entry" exitstatus=$STATE_CRITICAL fi -- cgit v0.10-9-g596f From 6e696643a5701ddd18945593743286b35b5944cb Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 4 Jul 2021 18:43:42 +0200 Subject: check_curl: changed to STATE_CRITICAL for infinite loops (-ffollow) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index daf64b0..ba08c36 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1106,8 +1106,8 @@ redir (curlhelp_write_curlbuf* header_buf) !strncmp(server_address, new_host, MAX_IPV4_HOSTLENGTH) && (host_name && !strncmp(host_name, new_host, MAX_IPV4_HOSTLENGTH)) && !strcmp(server_url, new_url)) - die (STATE_WARNING, - _("HTTP WARNING - redirection creates an infinite loop - %s://%s:%d%s%s\n"), + die (STATE_CRITICAL, + _("HTTP CRITICAL - redirection creates an infinite loop - %s://%s:%d%s%s\n"), use_ssl ? "https" : "http", new_host, new_port, new_url, (display_html ? "" : "")); /* set new values for redirected request */ -- cgit v0.10-9-g596f From 10db89344adc7dad1d1ec4ac00e4fadc6b79fa72 Mon Sep 17 00:00:00 2001 From: rincewind Date: Mon, 5 Jul 2021 09:56:19 +0200 Subject: Add quoting for the remaining variables diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh index 8af07b5..382bd72 100755 --- a/plugins-scripts/check_log.sh +++ b/plugins-scripts/check_log.sh @@ -77,7 +77,7 @@ print_usage() { } print_help() { - print_revision "$PROGNAME" $REVISION + print_revision "$PROGNAME" "$REVISION" echo "" print_usage echo "" @@ -111,11 +111,11 @@ while test -n "$1"; do exit "$STATE_OK" ;; --version) - print_revision "$PROGNAME" $REVISION + print_revision "$PROGNAME" "$REVISION" exit "$STATE_OK" ;; -V) - print_revision "$PROGNAME" $REVISION + print_revision "$PROGNAME" "$REVISION" exit "$STATE_OK" ;; --filename) -- cgit v0.10-9-g596f From 1fb635d8691180b312537a4540feb6f947986e86 Mon Sep 17 00:00:00 2001 From: Peter Newman Date: Thu, 22 Jul 2021 13:33:14 +0100 Subject: Re-attach a comment to where it actually belongs diff --git a/plugins-scripts/check_ifoperstatus.pl b/plugins-scripts/check_ifoperstatus.pl index 9ede163..c190ce9 100755 --- a/plugins-scripts/check_ifoperstatus.pl +++ b/plugins-scripts/check_ifoperstatus.pl @@ -124,10 +124,10 @@ if (!defined($session)) { ## map ifdescr to ifindex - should look at being able to cache this value if (defined $ifdescr || defined $iftype) { - # escape "/" in ifdescr - very common in the Cisco world if (defined $iftype) { $status=fetch_ifindex($snmpIfType, $iftype); } else { + # escape "/" in ifdescr - very common in the Cisco world $ifdescr =~ s/\//\\\//g; $status=fetch_ifindex($snmpIfDescr, $ifdescr); # if using on device with large number of interfaces # recommend use of SNMP v2 (get-bulk) -- cgit v0.10-9-g596f From 3f5c54c7830b0529030bb08e2c333497e70b6eb1 Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 25 Jul 2021 18:39:07 +0200 Subject: check_curl: fixed DNS caching for SSL hostnames (avoid CURLOPT_RESOLVE entry errors) diff --git a/plugins/check_curl.c b/plugins/check_curl.c index ba08c36..2c91a27 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -59,6 +59,8 @@ const char *email = "devel@monitoring-plugins.org"; #include #endif +#include + #define MAKE_LIBCURL_VERSION(major, minor, patch) ((major)*0x10000 + (minor)*0x100 + (patch)) #define DEFAULT_BUFFER_SIZE 2048 @@ -370,12 +372,55 @@ handle_curl_option_return_code (CURLcode res, const char* option) } int +lookup_host (const char *host, char *buf, size_t buflen) +{ + struct addrinfo hints, *res, *result; + int errcode; + void *ptr; + + memset (&hints, 0, sizeof (hints)); + hints.ai_family = address_family; + hints.ai_socktype = SOCK_STREAM; + hints.ai_flags |= AI_CANONNAME; + + errcode = getaddrinfo (host, NULL, &hints, &result); + if (errcode != 0) + return errcode; + + res = result; + + while (res) { + inet_ntop (res->ai_family, res->ai_addr->sa_data, buf, buflen); + switch (res->ai_family) { + case AF_INET: + ptr = &((struct sockaddr_in *) res->ai_addr)->sin_addr; + break; + case AF_INET6: + ptr = &((struct sockaddr_in6 *) res->ai_addr)->sin6_addr; + break; + } + inet_ntop (res->ai_family, ptr, buf, buflen); + if (verbose >= 1) + printf ("* getaddrinfo IPv%d address: %s\n", + res->ai_family == PF_INET6 ? 6 : 4, buf); + res = res->ai_next; + } + + freeaddrinfo(result); + + return 0; +} + +int check_http (void) { int result = STATE_OK; int page_len = 0; int i; char *force_host_header = NULL; + struct curl_slist *host = NULL; + char addrstr[100]; + char dnscache[DEFAULT_BUFFER_SIZE]; /* initialize curl */ if (curl_global_init (CURL_GLOBAL_DEFAULT) != CURLE_OK) @@ -418,9 +463,12 @@ check_http (void) // fill dns resolve cache to make curl connect to the given server_address instead of the host_name, only required for ssl, because we use the host_name later on to make SNI happy if(use_ssl && host_name != NULL) { - struct curl_slist *host = NULL; - char dnscache[DEFAULT_BUFFER_SIZE]; - snprintf (dnscache, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, server_address); + if ( (res=lookup_host (server_address, addrstr, 100)) != 0) { + snprintf (msg, DEFAULT_BUFFER_SIZE, _("Unable to lookup IP address for '%s': getaddrinfo returned %d - %s"), + server_address, res, gai_strerror (res)); + die (STATE_CRITICAL, "HTTP CRITICAL - %s\n", msg); + } + snprintf (dnscache, DEFAULT_BUFFER_SIZE, "%s:%d:%s", host_name, server_port, addrstr); host = curl_slist_append(NULL, dnscache); curl_easy_setopt(curl, CURLOPT_RESOLVE, host); if (verbose>=1) -- cgit v0.10-9-g596f From de5503063e4ea455a7a0a57afcc467a2041c859f Mon Sep 17 00:00:00 2001 From: Andreas Baumann Date: Sun, 25 Jul 2021 18:49:06 +0200 Subject: check_curl: fixed a potential buffer overflow in retir/uri_string diff --git a/plugins/check_curl.c b/plugins/check_curl.c index 2c91a27..5990b95 100644 --- a/plugins/check_curl.c +++ b/plugins/check_curl.c @@ -1033,8 +1033,8 @@ char* uri_string (const UriTextRangeA range, char* buf, size_t buflen) { if (!range.first) return "(null)"; - strncpy (buf, range.first, max (buflen, range.afterLast - range.first)); - buf[max (buflen, range.afterLast - range.first)] = '\0'; + strncpy (buf, range.first, max (buflen-1, range.afterLast - range.first)); + buf[max (buflen-1, range.afterLast - range.first)] = '\0'; buf[range.afterLast - range.first] = '\0'; return buf; } -- cgit v0.10-9-g596f From f29ba217d7521efda868551eab2866067615e49a Mon Sep 17 00:00:00 2001 From: rincewind Date: Wed, 1 Sep 2021 10:48:32 +0200 Subject: Use netcat-openbsd for debian explicitely diff --git a/.github/prepare_debian.sh b/.github/prepare_debian.sh index c68b9f5..4021c10 100755 --- a/.github/prepare_debian.sh +++ b/.github/prepare_debian.sh @@ -13,7 +13,7 @@ if [ $(lsb_release -is) = "Debian" ]; then fi apt-get -y install perl autotools-dev libdbi-dev libldap2-dev libpq-dev libradcli-dev libnet-snmp-perl procps apt-get -y install libdbi0-dev libdbd-sqlite3 libssl-dev dnsutils snmp-mibs-downloader libsnmp-perl snmpd -apt-get -y install fping snmp netcat smbclient vsftpd apache2 ssl-cert postfix libhttp-daemon-ssl-perl +apt-get -y install fping snmp netcat-openbsd smbclient vsftpd apache2 ssl-cert postfix libhttp-daemon-ssl-perl apt-get -y install libdbd-sybase-perl libnet-dns-perl apt-get -y install slapd ldap-utils apt-get -y install gcc make autoconf automake gettext -- cgit v0.10-9-g596f From 70f55ca9db87f639856e0548a57081c886e09d14 Mon Sep 17 00:00:00 2001 From: Jonny007-MKD Date: Sun, 23 Feb 2020 15:02:43 +0100 Subject: check_dns: add --expect-nxdomain diff --git a/NEWS b/NEWS index 4061c03..3790e8a 100644 --- a/NEWS +++ b/NEWS @@ -13,6 +13,7 @@ This file documents the major additions and syntax changes between releases. check_dns: Accept CIDR check_dns: allow unsorted addresses check_dns: allow forcing complete match of all addresses + check_dns: option to expect NXDOMAIN check_apt: add --only-critical switch check_apt: add -l/--list option to print packages check_file_age: add range checking diff --git a/plugins/check_dns.c b/plugins/check_dns.c index 0f2e654..0c10f09 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -41,7 +41,7 @@ const char *email = "devel@monitoring-plugins.org"; int process_arguments (int, char **); int validate_arguments (void); -int error_scan (char *); +int error_scan (char *, int*); int ip_match_cidr(const char *, const char *); unsigned long ip2long(const char *); void print_help (void); @@ -54,6 +54,7 @@ char ptr_server[ADDRESS_LENGTH] = ""; int verbose = FALSE; char **expected_address = NULL; int expected_address_cnt = 0; +int expect_nxdomain = FALSE; int expect_authority = FALSE; int all_match = FALSE; @@ -87,6 +88,7 @@ main (int argc, char **argv) int parse_address = FALSE; /* This flag scans for Address: but only after Name: */ output chld_out, chld_err; size_t i; + int is_nxdomain = FALSE; setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); @@ -186,7 +188,7 @@ main (int argc, char **argv) } - result = error_scan (chld_out.line[i]); + result = error_scan (chld_out.line[i], &is_nxdomain); if (result != STATE_OK) { msg = strchr (chld_out.line[i], ':'); if(msg) msg++; @@ -199,8 +201,8 @@ main (int argc, char **argv) if (verbose) puts(chld_err.line[i]); - if (error_scan (chld_err.line[i]) != STATE_OK) { - result = max_state (result, error_scan (chld_err.line[i])); + if (error_scan (chld_err.line[i], &is_nxdomain) != STATE_OK) { + result = max_state (result, error_scan (chld_err.line[i], &is_nxdomain)); msg = strchr(input_buffer, ':'); if(msg) msg++; @@ -209,6 +211,10 @@ main (int argc, char **argv) } } + if (is_nxdomain && !expect_nxdomain) { + die (STATE_CRITICAL, _("Domain '%s' was not found by the server\n"), query_address); + } + if (addresses) { int i,slen; char *adrp; @@ -260,6 +266,16 @@ main (int argc, char **argv) } } + if (expect_nxdomain) { + if (!is_nxdomain) { + result = STATE_CRITICAL; + xasprintf(&msg, _("Domain '%s' was found by the server: '%s'\n"), query_address, address); + } else { + if (address == NULL) free(address); + address = "NXDOMAIN"; + } + } + /* check if authoritative */ if (result == STATE_OK && expect_authority && non_authoritative) { result = STATE_CRITICAL; @@ -339,9 +355,15 @@ ip2long(const char* src) { } int -error_scan (char *input_buffer) +error_scan (char *input_buffer, int* is_nxdomain) { + const int nxdomain = strstr (input_buffer, "Non-existent") || + strstr (input_buffer, "** server can't find") || + strstr (input_buffer, "** Can't find") || + strstr (input_buffer, "NXDOMAIN"); + if (nxdomain) *is_nxdomain = TRUE; + /* the DNS lookup timed out */ if (strstr (input_buffer, _("Note: nslookup is deprecated and may be removed from future releases.")) || strstr (input_buffer, _("Consider using the `dig' or `host' programs instead. Run nslookup with")) || @@ -360,7 +382,7 @@ error_scan (char *input_buffer) /* Connection was refused */ else if (strstr (input_buffer, "Connection refused") || - strstr (input_buffer, "Couldn't find server") || + strstr (input_buffer, "Couldn't find server") || strstr (input_buffer, "Refused") || (strstr (input_buffer, "** server can't find") && strstr (input_buffer, ": REFUSED"))) @@ -374,13 +396,6 @@ error_scan (char *input_buffer) else if (strstr (input_buffer, "No information")) die (STATE_CRITICAL, _("No information returned by DNS server at %s\n"), dns_server); - /* Host or domain name does not exist */ - else if (strstr (input_buffer, "Non-existent") || - strstr (input_buffer, "** server can't find") || - strstr (input_buffer, "** Can't find") || - strstr (input_buffer,"NXDOMAIN")) - die (STATE_CRITICAL, _("Domain %s was not found by the server\n"), query_address); - /* Network is unreachable */ else if (strstr (input_buffer, "Network is unreachable")) die (STATE_CRITICAL, _("Network is unreachable\n")); @@ -417,6 +432,7 @@ process_arguments (int argc, char **argv) {"server", required_argument, 0, 's'}, {"reverse-server", required_argument, 0, 'r'}, {"expected-address", required_argument, 0, 'a'}, + {"expect-nxdomain", no_argument, 0, 'n'}, {"expect-authority", no_argument, 0, 'A'}, {"all", no_argument, 0, 'L'}, {"warning", required_argument, 0, 'w'}, @@ -432,7 +448,7 @@ process_arguments (int argc, char **argv) strcpy (argv[c], "-t"); while (1) { - c = getopt_long (argc, argv, "hVvALt:H:s:r:a:w:c:", long_opts, &opt_index); + c = getopt_long (argc, argv, "hVvALnt:H:s:r:a:w:c:", long_opts, &opt_index); if (c == -1 || c == EOF) break; @@ -491,6 +507,9 @@ process_arguments (int argc, char **argv) expected_address_cnt++; } break; + case 'n': /* expect NXDOMAIN */ + expect_nxdomain = TRUE; + break; case 'A': /* expect authority */ expect_authority = TRUE; break; @@ -532,8 +551,15 @@ process_arguments (int argc, char **argv) int validate_arguments () { - if (query_address[0] == 0) + if (query_address[0] == 0) { + printf ("missing --host argument\n"); + return ERROR; + } + + if (expected_address_cnt > 0 && expect_nxdomain) { + printf ("--expected-address and --expect-nxdomain cannot be combined\n"); return ERROR; + } return OK; } @@ -566,6 +592,9 @@ print_help (void) printf (" %s\n", _("Optional IP-ADDRESS/CIDR you expect the DNS server to return. HOST must end")); printf (" %s\n", _("with a dot (.). This option can be repeated multiple times (Returns OK if any")); printf (" %s\n", _("value matches).")); + printf (" -n, --expect-nxdomain\n"); + printf (" %s\n", _("Expect the DNS server to return NXDOMAIN (i.e. the domain was not found)")); + printf (" %s\n", _("Cannot be used together with -a")); printf (" -A, --expect-authority\n"); printf (" %s\n", _("Optionally expect the DNS server to be authoritative for the lookup")); printf (" -w, --warning=seconds\n"); @@ -586,5 +615,5 @@ void print_usage (void) { printf ("%s\n", _("Usage:")); - printf ("%s -H host [-s server] [-a expected-address] [-A] [-t timeout] [-w warn] [-c crit] [-L]\n", progname); + printf ("%s -H host [-s server] [-a expected-address] [-n] [-A] [-t timeout] [-w warn] [-c crit] [-L]\n", progname); } diff --git a/plugins/t/check_dns.t b/plugins/t/check_dns.t index cdfbe60..1e7d534 100644 --- a/plugins/t/check_dns.t +++ b/plugins/t/check_dns.t @@ -10,7 +10,7 @@ use NPTest; plan skip_all => "check_dns not compiled" unless (-x "check_dns"); -plan tests => 19; +plan tests => 23; my $successOutput = '/DNS OK: [\.0-9]+ seconds? response time/'; @@ -58,7 +58,7 @@ my $dns_server = getTestParameter( my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", - "10.0.0.1", + "192.0.2.0", ); my $res; @@ -105,3 +105,11 @@ cmp_ok( $res->return_code, '==', 0, "Got expected address"); $res = NPTest->testCmd("./check_dns -H $hostname_valid -a $hostname_invalid_cidr -t 5"); cmp_ok( $res->return_code, '==', 2, "Got wrong address"); like ( $res->output, "/^DNS CRITICAL.*expected '$hostname_invalid_cidr' but got '$hostname_valid_ip'".'$/', "Output OK"); + +$res = NPTest->testCmd("./check_dns -H $hostname_valid -n"); +cmp_ok( $res->return_code, '==', 2, "Found $hostname_valid"); +like ( $res->output, "/^DNS CRITICAL.*Domain '$hostname_valid' was found by the server:/", "Output OK"); + +$res = NPTest->testCmd("./check_dns -H $hostname_invalid -n"); +cmp_ok( $res->return_code, '==', 0, "Did not find $hostname_invalid"); +like ( $res->output, $successOutput, "Output OK" ); -- cgit v0.10-9-g596f From 2056c5853175e6ad0e041ff3776e10d9e612b521 Mon Sep 17 00:00:00 2001 From: Jonny007-MKD Date: Sun, 23 Feb 2020 15:05:42 +0100 Subject: check_dns: Fix memory leak diff --git a/plugins/check_dns.c b/plugins/check_dns.c index 0c10f09..2f944f9 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -271,7 +271,7 @@ main (int argc, char **argv) result = STATE_CRITICAL; xasprintf(&msg, _("Domain '%s' was found by the server: '%s'\n"), query_address, address); } else { - if (address == NULL) free(address); + if (address != NULL) free(address); address = "NXDOMAIN"; } } -- cgit v0.10-9-g596f From cfc43a327526d838db5ec81f5594df4a14319786 Mon Sep 17 00:00:00 2001 From: Jonny007-MKD Date: Mon, 24 May 2021 20:40:02 +0200 Subject: Improvements suggested by tobiaswiese diff --git a/plugins/check_dns.c b/plugins/check_dns.c index 2f944f9..9de6caf 100644 --- a/plugins/check_dns.c +++ b/plugins/check_dns.c @@ -41,7 +41,7 @@ const char *email = "devel@monitoring-plugins.org"; int process_arguments (int, char **); int validate_arguments (void); -int error_scan (char *, int*); +int error_scan (char *, int *); int ip_match_cidr(const char *, const char *); unsigned long ip2long(const char *); void print_help (void); @@ -355,7 +355,7 @@ ip2long(const char* src) { } int -error_scan (char *input_buffer, int* is_nxdomain) +error_scan (char *input_buffer, int *is_nxdomain) { const int nxdomain = strstr (input_buffer, "Non-existent") || diff --git a/plugins/t/check_dns.t b/plugins/t/check_dns.t index 1e7d534..afb2062 100644 --- a/plugins/t/check_dns.t +++ b/plugins/t/check_dns.t @@ -58,7 +58,7 @@ my $dns_server = getTestParameter( my $host_nonresponsive = getTestParameter( "NP_HOST_NONRESPONSIVE", "The hostname of system not responsive to network requests", - "192.0.2.0", + "10.0.0.1", ); my $res; -- cgit v0.10-9-g596f From 66e245375992c3942dbd5761f8b991e52bf5f9ab Mon Sep 17 00:00:00 2001 From: rincewind Date: Sat, 25 Sep 2021 23:24:34 +0200 Subject: Introduce new perfdata functions and stuff for using (u)int64_t diff --git a/plugins/utils.c b/plugins/utils.c index 348ec02..011f715 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -27,6 +27,8 @@ #include "utils_base.h" #include #include +#include +#include #include @@ -239,6 +241,46 @@ is_intnonneg (char *number) return FALSE; } +/* + * Checks whether the number in the string _number_ can be put inside a int64_t + * On success the number will be written to the _target_ address, if _target_ is not set + * to NULL. + */ +bool is_int64(char *number, int64_t *target) { + errno = 0; + uint64_t tmp = strtoll(number, NULL, 10); + if (errno != 0) { + return false; + } + if (tmp < INT64_MIN || tmp > INT64_MAX) { + return false; + } + if (target != NULL) { + *target = tmp; + } + return true; +} + +/* + * Checks whether the number in the string _number_ can be put inside a uint64_t + * On success the number will be written to the _target_ address, if _target_ is not set + * to NULL. + */ +bool is_uint64(char *number, uint64_t *target) { + errno = 0; + uint64_t tmp = strtoll(number, NULL, 10); + if (errno != 0) { + return false; + } + if (tmp < 0 || tmp > UINT64_MAX) { + return false; + } + if (target != NULL) { + *target = tmp; + } + return true; +} + int is_intpercent (char *number) { @@ -556,6 +598,84 @@ char *perfdata (const char *label, } +char *perfdata_uint64 (const char *label, + uint64_t val, + const char *uom, + int warnp, + uint64_t warn, + int critp, + uint64_t crit, + int minp, + uint64_t minv, + int maxp, + uint64_t maxv) +{ + char *data = NULL; + + if (strpbrk (label, "'= ")) + xasprintf (&data, "'%s'=%ld%s;", label, val, uom); + else + xasprintf (&data, "%s=%ld%s;", label, val, uom); + + if (warnp) + xasprintf (&data, "%s%ld;", data, warn); + else + xasprintf (&data, "%s;", data); + + if (critp) + xasprintf (&data, "%s%ld;", data, crit); + else + xasprintf (&data, "%s;", data); + + if (minp) + xasprintf (&data, "%s%ld", data, minv); + + if (maxp) + xasprintf (&data, "%s;%ld", data, maxv); + + return data; +} + + +char *perfdata_int64 (const char *label, + int64_t val, + const char *uom, + int warnp, + int64_t warn, + int critp, + int64_t crit, + int minp, + int64_t minv, + int maxp, + int64_t maxv) +{ + char *data = NULL; + + if (strpbrk (label, "'= ")) + xasprintf (&data, "'%s'=%ld%s;", label, val, uom); + else + xasprintf (&data, "%s=%ld%s;", label, val, uom); + + if (warnp) + xasprintf (&data, "%s%ld;", data, warn); + else + xasprintf (&data, "%s;", data); + + if (critp) + xasprintf (&data, "%s%ld;", data, crit); + else + xasprintf (&data, "%s;", data); + + if (minp) + xasprintf (&data, "%s%ld", data, minv); + + if (maxp) + xasprintf (&data, "%s;%ld", data, maxv); + + return data; +} + + char *fperfdata (const char *label, double val, const char *uom, diff --git a/plugins/utils.h b/plugins/utils.h index 33a2054..91a9c3f 100644 --- a/plugins/utils.h +++ b/plugins/utils.h @@ -16,6 +16,9 @@ suite of plugins. */ /* now some functions etc are being defined in ../lib/utils_base.c */ #include "utils_base.h" + +#include + #ifdef NP_EXTRA_OPTS /* Include extra-opts functions if compiled in */ #include "extra_opts.h" @@ -38,6 +41,7 @@ int is_intpos (char *); int is_intneg (char *); int is_intnonneg (char *); int is_intpercent (char *); +bool is_uint64(char *number, uint64_t *target); int is_numeric (char *); int is_positive (char *); @@ -88,6 +92,12 @@ void usage_va(const char *fmt, ...) __attribute__((noreturn)); char *perfdata (const char *, long int, const char *, int, long int, int, long int, int, long int, int, long int); +char *perfdata_uint64 (const char *, uint64_t , const char *, int, uint64_t, + int, uint64_t, int, uint64_t, int, uint64_t); + +char *perfdata_int64 (const char *, int64_t, const char *, int, int64_t, + int, int64_t, int, int64_t, int, int64_t); + char *fperfdata (const char *, double, const char *, int, double, int, double, int, double, int, double); -- cgit v0.10-9-g596f From 4621427ba8cbfab4815e65d35a728ad51ad8c391 Mon Sep 17 00:00:00 2001 From: rincewind Date: Sat, 25 Sep 2021 23:24:45 +0200 Subject: check_swap: Fix perfdata und thresholds for big values and simplify code The original problem was https://github.com/monitoring-plugins/monitoring-plugins/pull/1705 where the performance data output of check_swap did not conform to the parser logic of a monitoring system (which decided to go for "correct" SI or IEC units. The PR was accompanied by a change to byte values in the performance data which broke the _perfdata_ helper function which could not handle values of this size. The fix for this, was to use _fperfdata_ which could, but would use float values. I didn't like that (since all values here are discreet) and this is my proposal for a fix for the problem. It introduces some helper functions which do now explicitely work with (u)int64_t, including a special version of the _perfdata_ helper. In the process of introducing this to check_swap, I stumbled over several sections of the check_swap code which I found problematic. Therefore I tried to simplify the code and make it more readable and less redundant. I am kinda sorry about this, but sincerely hope my changes can be helpful. diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 0ff0c77..25bcb3d 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -34,6 +34,10 @@ const char *email = "devel@monitoring-plugins.org"; #include "common.h" #include "popen.h" #include "utils.h" +#include +#include +#include +#include #ifdef HAVE_DECL_SWAPCTL # ifdef HAVE_SYS_PARAM_H @@ -51,26 +55,30 @@ const char *email = "devel@monitoring-plugins.org"; # define SWAP_CONVERSION 1 #endif -int check_swap (int usp, float free_swap_mb, float total_swap_mb); +typedef struct { + bool is_percentage; + uint64_t value; +} threshold_t; + +int check_swap (float free_swap_mb, float total_swap_mb); int process_arguments (int argc, char **argv); int validate_arguments (void); void print_usage (void); void print_help (void); -int warn_percent = 0; -int crit_percent = 0; -float warn_size_bytes = 0; -float crit_size_bytes = 0; +threshold_t warn; +threshold_t crit; int verbose; -int allswaps; +bool allswaps; int no_swap_state = STATE_CRITICAL; int main (int argc, char **argv) { - int percent_used, percent; - float total_swap_mb = 0, used_swap_mb = 0, free_swap_mb = 0; - float dsktotal_mb = 0, dskused_mb = 0, dskfree_mb = 0, tmp_mb = 0; + unsigned int percent_used, percent; + uint64_t total_swap_mb = 0, used_swap_mb = 0, free_swap_mb = 0; + uint64_t dsktotal_mb = 0, dskused_mb = 0, dskfree_mb = 0; + uint64_t tmp_KB = 0; int result = STATE_UNKNOWN; char input_buffer[MAX_INPUT_BUFFER]; #ifdef HAVE_PROC_MEMINFO @@ -116,10 +124,15 @@ main (int argc, char **argv) } fp = fopen (PROC_MEMINFO, "r"); while (fgets (input_buffer, MAX_INPUT_BUFFER - 1, fp)) { - if (sscanf (input_buffer, "%*[S]%*[w]%*[a]%*[p]%*[:] %f %f %f", &dsktotal_mb, &dskused_mb, &dskfree_mb) == 3) { - dsktotal_mb = dsktotal_mb / 1048576; /* Apply conversion */ - dskused_mb = dskused_mb / 1048576; - dskfree_mb = dskfree_mb / 1048576; + /* + * The following sscanf call looks for a line looking like: "Swap: 123 123 123" + * On which kind of system this format exists, I can not say, but I wanted to + * document this for people who are not adapt with sscanf anymore, like me + */ + if (sscanf (input_buffer, "%*[S]%*[w]%*[a]%*[p]%*[:] %lu %lu %lu", &dsktotal_mb, &dskused_mb, &dskfree_mb) == 3) { + dsktotal_mb = dsktotal_mb / (1024 * 1024); /* Apply conversion */ + dskused_mb = dskused_mb / (1024 * 1024); + dskfree_mb = dskfree_mb / (1024 * 1024); total_swap_mb += dsktotal_mb; used_swap_mb += dskused_mb; free_swap_mb += dskfree_mb; @@ -128,21 +141,25 @@ main (int argc, char **argv) percent=100.0; else percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); + result = max_state (result, check_swap (dskfree_mb, dsktotal_mb)); if (verbose) xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } } - else if (sscanf (input_buffer, "%*[S]%*[w]%*[a]%*[p]%[TotalFre]%*[:] %f %*[k]%*[B]", str, &tmp_mb)) { + /* + * The following sscanf call looks for lines looking like: "SwapTotal: 123" and "SwapFree: 123" + * This format exists at least on Debian Linux with a 5.* kernel + */ + else if (sscanf (input_buffer, "%*[S]%*[w]%*[a]%*[p]%[TotalFre]%*[:] %lu %*[k]%*[B]", str, &tmp_KB)) { if (verbose >= 3) { - printf("Got %s with %f\n", str, tmp_mb); + printf("Got %s with %lu\n", str, tmp_KB); } /* I think this part is always in Kb, so convert to mb */ if (strcmp ("Total", str) == 0) { - dsktotal_mb = tmp_mb / 1024; + dsktotal_mb = tmp_KB / 1024; } else if (strcmp ("Free", str) == 0) { - dskfree_mb = tmp_mb / 1024; + dskfree_mb = tmp_KB / 1024; } } } @@ -227,7 +244,7 @@ main (int argc, char **argv) free_swap_mb += dskfree_mb; if (allswaps) { percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); + result = max_state (result, check_swap (dskfree_mb, dsktotal_mb)); if (verbose) xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -289,7 +306,7 @@ main (int argc, char **argv) if(allswaps && dsktotal_mb > 0){ percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); + result = max_state (result, check_swap (dskfree_mb, dsktotal_mb)); if (verbose) { xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -328,7 +345,7 @@ main (int argc, char **argv) if(allswaps && dsktotal_mb > 0){ percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); - result = max_state (result, check_swap (percent, dskfree_mb, dsktotal_mb)); + result = max_state (result, check_swap(dskfree_mb, dsktotal_mb)); if (verbose) { xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); } @@ -355,14 +372,19 @@ main (int argc, char **argv) status = "- Swap is either disabled, not present, or of zero size. "; } - result = max_state (result, check_swap (percent_used, free_swap_mb, total_swap_mb)); - printf (_("SWAP %s - %d%% free (%d MB out of %d MB) %s|"), + result = max_state (result, check_swap(free_swap_mb, total_swap_mb)); + printf (_("SWAP %s - %d%% free (%dMB out of %dMB) %s|"), state_text (result), (100 - percent_used), (int) free_swap_mb, (int) total_swap_mb, status); - puts (perfdata ("swap", (long) free_swap_mb, "MB", - TRUE, (long) max (warn_size_bytes/(1024 * 1024), warn_percent/100.0*total_swap_mb), - TRUE, (long) max (crit_size_bytes/(1024 * 1024), crit_percent/100.0*total_swap_mb), + uint64_t warn_print = warn.value; + if (warn.is_percentage) warn_print = warn.value * (total_swap_mb *1024 *1024/100); + uint64_t crit_print = crit.value; + if (crit.is_percentage) crit_print = crit.value * (total_swap_mb *1024 *1024/100); + + puts (perfdata_uint64 ("swap", free_swap_mb *1024 *1024, "B", + TRUE, warn_print, + TRUE, crit_print, TRUE, 0, TRUE, (long) total_swap_mb)); @@ -370,26 +392,37 @@ main (int argc, char **argv) } - int -check_swap (int usp, float free_swap_mb, float total_swap_mb) +check_swap(float free_swap_mb, float total_swap_mb) { if (!total_swap_mb) return no_swap_state; - int result = STATE_UNKNOWN; - float free_swap = free_swap_mb * (1024 * 1024); /* Convert back to bytes as warn and crit specified in bytes */ - if (usp >= 0 && crit_percent != 0 && usp >= (100.0 - crit_percent)) - result = STATE_CRITICAL; - else if (crit_size_bytes > 0 && free_swap <= crit_size_bytes) - result = STATE_CRITICAL; - else if (usp >= 0 && warn_percent != 0 && usp >= (100.0 - warn_percent)) - result = STATE_WARNING; - else if (warn_size_bytes > 0 && free_swap <= warn_size_bytes) - result = STATE_WARNING; - else if (usp >= 0.0) - result = STATE_OK; - return result; + uint64_t free_swap = free_swap_mb * (1024 * 1024); /* Convert back to bytes as warn and crit specified in bytes */ + + if (!crit.is_percentage && crit.value <= free_swap) return STATE_CRITICAL; + if (!warn.is_percentage && warn.value <= free_swap) return STATE_WARNING; + + + uint64_t usage_percentage = ((total_swap_mb - free_swap_mb) / total_swap_mb) * 100; + + if (crit.is_percentage && + usage_percentage >= 0 && + crit.value != 0 && + usage_percentage >= (100 - crit.value)) + { + return STATE_CRITICAL; + } + + if (warn.is_percentage && + usage_percentage >= 0 && + warn.value != 0 && + usage_percentage >= (100 - warn.value)) + { + return STATE_WARNING; + } + + return STATE_OK; } @@ -422,42 +455,67 @@ process_arguments (int argc, char **argv) break; switch (c) { - case 'w': /* warning size threshold */ - if (is_intnonneg (optarg)) { - warn_size_bytes = (float) atoi (optarg); - break; - } - else if (strstr (optarg, ",") && - strstr (optarg, "%") && - sscanf (optarg, "%f,%d%%", &warn_size_bytes, &warn_percent) == 2) { - warn_size_bytes = floorf(warn_size_bytes); - break; - } - else if (strstr (optarg, "%") && - sscanf (optarg, "%d%%", &warn_percent) == 1) { - break; - } - else { - usage4 (_("Warning threshold must be integer or percentage!")); - } - case 'c': /* critical size threshold */ - if (is_intnonneg (optarg)) { - crit_size_bytes = (float) atoi (optarg); - break; - } - else if (strstr (optarg, ",") && - strstr (optarg, "%") && - sscanf (optarg, "%f,%d%%", &crit_size_bytes, &crit_percent) == 2) { - crit_size_bytes = floorf(crit_size_bytes); - break; - } - else if (strstr (optarg, "%") && - sscanf (optarg, "%d%%", &crit_percent) == 1) { - break; - } - else { - usage4 (_("Critical threshold must be integer or percentage!")); + case 'w': /* warning size threshold */ + { + /* + * We expect either a positive integer value without a unit, which means + * the unit is Bytes or a positive integer value and a percentage sign (%), + * which means the value must be with 0 and 100 and is relative to the total swap + */ + size_t length; + length = strlen(optarg); + + if (optarg[length - 1] == '%') { + // It's percentage! + warn.is_percentage = true; + optarg[length - 1] = '\0'; + if (is_uint64(optarg, &warn.value)) { + if (warn.value > 100) { + usage4 (_("Warning threshold percentage must be <= 100!")); + } else { + break; + } + } + } else { + // It's Bytes + warn.is_percentage = false; + if (is_uint64(optarg, &warn.value)) { + break; + } else { + usage4 (_("Warning threshold be positive integer or percentage!")); + } + } } + case 'c': /* critical size threshold */ + { + /* + * We expect either a positive integer value without a unit, which means + * the unit is Bytes or a positive integer value and a percentage sign (%), + * which means the value must be with 0 and 100 and is relative to the total swap + */ + size_t length; + length = strlen(optarg); + + if (optarg[length - 1] == '%') { + // It's percentage! + crit.is_percentage = true; + optarg[length - 1] = '\0'; + if (is_uint64(optarg, &crit.value)) { + if (crit.value> 100) { + usage4 (_("Critical threshold percentage must be <= 100!")); + } else { + break; + } + } + } else { + crit.is_percentage = false; + if (is_uint64(optarg, &crit.value)) { + break; + } else { + usage4 (_("Critical threshold be positive integer or percentage!")); + } + } + } case 'a': /* all swap */ allswaps = TRUE; break; @@ -482,23 +540,6 @@ process_arguments (int argc, char **argv) c = optind; if (c == argc) return validate_arguments (); - if (warn_percent == 0 && is_intnonneg (argv[c])) - warn_percent = atoi (argv[c++]); - - if (c == argc) - return validate_arguments (); - if (crit_percent == 0 && is_intnonneg (argv[c])) - crit_percent = atoi (argv[c++]); - - if (c == argc) - return validate_arguments (); - if (warn_size_bytes == 0 && is_intnonneg (argv[c])) - warn_size_bytes = (float) atoi (argv[c++]); - - if (c == argc) - return validate_arguments (); - if (crit_size_bytes == 0 && is_intnonneg (argv[c])) - crit_size_bytes = (float) atoi (argv[c++]); return validate_arguments (); } @@ -508,17 +549,12 @@ process_arguments (int argc, char **argv) int validate_arguments (void) { - if (warn_percent == 0 && crit_percent == 0 && warn_size_bytes == 0 - && crit_size_bytes == 0) { + if (warn.value == 0 && crit.value == 0) { return ERROR; } - else if (warn_percent < crit_percent) { - usage4 - (_("Warning percentage should be more than critical percentage")); - } - else if (warn_size_bytes < crit_size_bytes) { + else if (warn.value < crit.value) { usage4 - (_("Warning free space should be more than critical free space")); + (_("Warning should be more than critical")); } return OK; } @@ -564,7 +600,6 @@ print_help (void) } - void print_usage (void) { -- cgit v0.10-9-g596f From 280ae58ed8e340f8096cf37f60c84f99d6723537 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Sun, 26 Sep 2021 00:34:44 +0200 Subject: Remove spaces from tests diff --git a/plugins/t/check_swap.t b/plugins/t/check_swap.t index e44adc9..de9e0f0 100644 --- a/plugins/t/check_swap.t +++ b/plugins/t/check_swap.t @@ -8,9 +8,9 @@ use strict; use Test::More tests => 8; use NPTest; -my $successOutput = '/^SWAP OK - [0-9]+\% free \([0-9]+ MB out of [0-9]+ MB\)/'; -my $failureOutput = '/^SWAP CRITICAL - [0-9]+\% free \([0-9]+ MB out of [0-9]+ MB\)/'; -my $warnOutput = '/^SWAP WARNING - [0-9]+\% free \([0-9]+ MB out of [0-9]+ MB\)/'; +my $successOutput = '/^SWAP OK - [0-9]+\% free \([0-9]+MB out of [0-9]+MB\)/'; +my $failureOutput = '/^SWAP CRITICAL - [0-9]+\% free \([0-9]+MB out of [0-9]+MB\)/'; +my $warnOutput = '/^SWAP WARNING - [0-9]+\% free \([0-9]+MB out of [0-9]+MB\)/'; my $result; -- cgit v0.10-9-g596f From f55ea7632f4284a0b8858361270337bd9fde9a60 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Sun, 26 Sep 2021 01:34:45 +0200 Subject: Fix comparing logic diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 25bcb3d..6dec9b2 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -400,8 +400,8 @@ check_swap(float free_swap_mb, float total_swap_mb) uint64_t free_swap = free_swap_mb * (1024 * 1024); /* Convert back to bytes as warn and crit specified in bytes */ - if (!crit.is_percentage && crit.value <= free_swap) return STATE_CRITICAL; - if (!warn.is_percentage && warn.value <= free_swap) return STATE_WARNING; + if (!crit.is_percentage && crit.value >= free_swap) return STATE_CRITICAL; + if (!warn.is_percentage && warn.value >= free_swap) return STATE_WARNING; uint64_t usage_percentage = ((total_swap_mb - free_swap_mb) / total_swap_mb) * 100; -- cgit v0.10-9-g596f From d2f2da175eda5a06291a974d971968a1241d7935 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Sat, 2 Oct 2021 12:47:50 +0200 Subject: Change all to comments to old comment style diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 6dec9b2..4d124a3 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -466,7 +466,7 @@ process_arguments (int argc, char **argv) length = strlen(optarg); if (optarg[length - 1] == '%') { - // It's percentage! + /* It's percentage */ warn.is_percentage = true; optarg[length - 1] = '\0'; if (is_uint64(optarg, &warn.value)) { @@ -477,7 +477,7 @@ process_arguments (int argc, char **argv) } } } else { - // It's Bytes + /* It's Bytes */ warn.is_percentage = false; if (is_uint64(optarg, &warn.value)) { break; @@ -497,7 +497,7 @@ process_arguments (int argc, char **argv) length = strlen(optarg); if (optarg[length - 1] == '%') { - // It's percentage! + /* It's percentage */ crit.is_percentage = true; optarg[length - 1] = '\0'; if (is_uint64(optarg, &crit.value)) { @@ -508,6 +508,7 @@ process_arguments (int argc, char **argv) } } } else { + /* It's Bytes */ crit.is_percentage = false; if (is_uint64(optarg, &crit.value)) { break; -- cgit v0.10-9-g596f From 46c5327e348540ab04dc37d42f6d1c5408179fa6 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Sat, 2 Oct 2021 23:37:12 +0200 Subject: Revert to poor man's logic diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 4d124a3..685c2cc 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -37,7 +37,6 @@ const char *email = "devel@monitoring-plugins.org"; #include #include #include -#include #ifdef HAVE_DECL_SWAPCTL # ifdef HAVE_SYS_PARAM_H @@ -56,7 +55,7 @@ const char *email = "devel@monitoring-plugins.org"; #endif typedef struct { - bool is_percentage; + int is_percentage; uint64_t value; } threshold_t; @@ -69,7 +68,7 @@ void print_help (void); threshold_t warn; threshold_t crit; int verbose; -bool allswaps; +int allswaps; int no_swap_state = STATE_CRITICAL; int @@ -467,7 +466,7 @@ process_arguments (int argc, char **argv) if (optarg[length - 1] == '%') { /* It's percentage */ - warn.is_percentage = true; + warn.is_percentage = 1; optarg[length - 1] = '\0'; if (is_uint64(optarg, &warn.value)) { if (warn.value > 100) { @@ -478,7 +477,7 @@ process_arguments (int argc, char **argv) } } else { /* It's Bytes */ - warn.is_percentage = false; + warn.is_percentage = 0; if (is_uint64(optarg, &warn.value)) { break; } else { @@ -498,7 +497,7 @@ process_arguments (int argc, char **argv) if (optarg[length - 1] == '%') { /* It's percentage */ - crit.is_percentage = true; + crit.is_percentage = 1; optarg[length - 1] = '\0'; if (is_uint64(optarg, &crit.value)) { if (crit.value> 100) { @@ -509,7 +508,7 @@ process_arguments (int argc, char **argv) } } else { /* It's Bytes */ - crit.is_percentage = false; + crit.is_percentage = 0; if (is_uint64(optarg, &crit.value)) { break; } else { diff --git a/plugins/utils.c b/plugins/utils.c index 011f715..f7f8952 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -246,19 +246,19 @@ is_intnonneg (char *number) * On success the number will be written to the _target_ address, if _target_ is not set * to NULL. */ -bool is_int64(char *number, int64_t *target) { +int is_int64(char *number, int64_t *target) { errno = 0; uint64_t tmp = strtoll(number, NULL, 10); if (errno != 0) { - return false; + return 0; } if (tmp < INT64_MIN || tmp > INT64_MAX) { - return false; + return 0; } if (target != NULL) { *target = tmp; } - return true; + return 1; } /* @@ -266,19 +266,19 @@ bool is_int64(char *number, int64_t *target) { * On success the number will be written to the _target_ address, if _target_ is not set * to NULL. */ -bool is_uint64(char *number, uint64_t *target) { +int is_uint64(char *number, uint64_t *target) { errno = 0; uint64_t tmp = strtoll(number, NULL, 10); if (errno != 0) { - return false; + return 0; } if (tmp < 0 || tmp > UINT64_MAX) { - return false; + return 0; } if (target != NULL) { *target = tmp; } - return true; + return 1; } int diff --git a/plugins/utils.h b/plugins/utils.h index 91a9c3f..5b54da3 100644 --- a/plugins/utils.h +++ b/plugins/utils.h @@ -17,8 +17,6 @@ suite of plugins. */ #include "utils_base.h" -#include - #ifdef NP_EXTRA_OPTS /* Include extra-opts functions if compiled in */ #include "extra_opts.h" @@ -41,7 +39,8 @@ int is_intpos (char *); int is_intneg (char *); int is_intnonneg (char *); int is_intpercent (char *); -bool is_uint64(char *number, uint64_t *target); +int is_uint64(char *number, uint64_t *target); +int is_int64(char *number, int64_t *target); int is_numeric (char *); int is_positive (char *); -- cgit v0.10-9-g596f From ead405515fb4bf84ce18d2fe3f621058f09a8aa2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Mon, 18 Oct 2021 10:41:44 +0200 Subject: Restrict the nickname length of the test user for check_ircd check_ircd was using the string `ircd` plus the PID as a nickname for connecting to a IRC network by default. This caused errors, when the PID was too high and the network restricted the length of the nickname to 9 characters. This patch "fixes" this by just cutting it of, if it gets too big. diff --git a/plugins-scripts/check_ircd.pl b/plugins-scripts/check_ircd.pl index 22d21c2..e7ab80c 100755 --- a/plugins-scripts/check_ircd.pl +++ b/plugins-scripts/check_ircd.pl @@ -69,7 +69,7 @@ $ENV{'ENV'}=''; # -----------------------------------------------------------------[ Global ]-- $PROGNAME = "check_ircd"; -my $NICK="ircd$$"; +my $NICK="ircd" . $$ % 10000; my $USER_INFO="monitor localhost localhost : "; # -------------------------------------------------------------[ connection ]-- -- cgit v0.10-9-g596f From 03028d23b6c59bcb4000bc70209593afd798dfe3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Mon, 18 Oct 2021 13:16:10 +0200 Subject: Add comment to make the purpose of the nickname fix more obvious diff --git a/plugins-scripts/check_ircd.pl b/plugins-scripts/check_ircd.pl index e7ab80c..d869ae7 100755 --- a/plugins-scripts/check_ircd.pl +++ b/plugins-scripts/check_ircd.pl @@ -69,6 +69,8 @@ $ENV{'ENV'}=''; # -----------------------------------------------------------------[ Global ]-- $PROGNAME = "check_ircd"; +# nickname shouldn't be longer than 9 chars, this might happen with large PIDs +# To prevent this, we cut of the part over 10000 my $NICK="ircd" . $$ % 10000; my $USER_INFO="monitor localhost localhost : "; -- cgit v0.10-9-g596f From a96161c824f7f97830f4aa4daa166013961d55f1 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 25 Oct 2021 14:55:50 +0200 Subject: actions: map utmp from host to container this fixes the check_users not having any logged in user to check. diff --git a/.github/workflows/test.yml b/.github/workflows/test.yml index 512d28e..0f93930 100644 --- a/.github/workflows/test.yml +++ b/.github/workflows/test.yml @@ -35,6 +35,7 @@ jobs: -e NPTEST_CACHE="/src/.github/NPTest.cache" \ -w /src -v ${PWD}:/src \ --tmpfs /media/ramdisk1 \ + -v /var/run/utmp:/var/run/utmp \ --mount source=tmp-vol,destination=/src,target=/media/ramdisk2 \ ${{ matrix.distro }} \ /bin/sh -c '${{ matrix.prepare }} && \ -- cgit v0.10-9-g596f From a08215368e5f9dc0164fcce9f5591c5310fdeb8c Mon Sep 17 00:00:00 2001 From: Harald Jenny Date: Mon, 5 Jul 2021 10:29:09 +0200 Subject: Create check_load.c just a cosmetic fix so the load plugin display a LOAD prefix before check results diff --git a/plugins/check_load.c b/plugins/check_load.c index bf7b94b..0e4de54 100644 --- a/plugins/check_load.c +++ b/plugins/check_load.c @@ -209,7 +209,7 @@ main (int argc, char **argv) else if(la[i] > wload[i]) result = STATE_WARNING; } - printf("%s - %s|", state_text(result), status_line); + printf("LOAD %s - %s|", state_text(result), status_line); for(i = 0; i < 3; i++) printf("load%d=%.3f;%.3f;%.3f;0; ", nums[i], la[i], wload[i], cload[i]); -- cgit v0.10-9-g596f From e79ada81a696e3c826b383e3ff7cbc8f91bf46a4 Mon Sep 17 00:00:00 2001 From: Harald Jenny Date: Mon, 5 Jul 2021 10:30:39 +0200 Subject: Update check_load.t adjust tests for new plugin output diff --git a/plugins/t/check_load.t b/plugins/t/check_load.t index 55f6f75..60837ef 100644 --- a/plugins/t/check_load.t +++ b/plugins/t/check_load.t @@ -11,8 +11,8 @@ use NPTest; my $res; my $loadValue = "[0-9]+\.?[0-9]+"; -my $successOutput = "/^OK - load average: $loadValue, $loadValue, $loadValue/"; -my $failureOutput = "/^CRITICAL - load average: $loadValue, $loadValue, $loadValue/"; +my $successOutput = "/^LOAD OK - load average: $loadValue, $loadValue, $loadValue/"; +my $failureOutput = "/^LOAD CRITICAL - load average: $loadValue, $loadValue, $loadValue/"; plan tests => 11; -- cgit v0.10-9-g596f From 078c69d2ddf6b7dd2dfef5ca0f3013a723ec0268 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Mon, 25 Oct 2021 17:34:13 +0200 Subject: Recognice IEC binary units and format accordingly to base2 (always) diff --git a/plugins/check_disk.c b/plugins/check_disk.c index a273519..0786228 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -574,21 +574,24 @@ process_arguments (int argc, char **argv) case 'u': if (units) free(units); - if (! strcmp (optarg, "bytes")) { + if (! strcasecmp (optarg, "bytes")) { mult = (uintmax_t)1; units = strdup ("B"); - } else if (! strcmp (optarg, "kB")) { + } else if ( (! strcmp (optarg, "kB")) || (!strcmp(optarg, "KiB")) ) { mult = (uintmax_t)1024; - units = strdup ("kB"); - } else if (! strcmp (optarg, "MB")) { + units = strdup ("kiB"); + } else if ( (! strcmp (optarg, "MB")) || (!strcmp(optarg, "MiB")) ) { mult = (uintmax_t)1024 * 1024; - units = strdup ("MB"); - } else if (! strcmp (optarg, "GB")) { + units = strdup ("MiB"); + } else if ( (! strcmp (optarg, "GB")) || (!strcmp(optarg, "GiB")) ) { mult = (uintmax_t)1024 * 1024 * 1024; - units = strdup ("GB"); - } else if (! strcmp (optarg, "TB")) { + units = strdup ("GiB"); + } else if ( (! strcmp (optarg, "TB")) || (!strcmp(optarg, "TiB")) ) { mult = (uintmax_t)1024 * 1024 * 1024 * 1024; - units = strdup ("TB"); + units = strdup ("TiB"); + } else if ( (! strcmp (optarg, "PB")) || (!strcmp(optarg, "PiB")) ) { + mult = (uintmax_t)1024 * 1024 * 1024 * 1024 * 1024; + units = strdup ("PiB"); } else { die (STATE_UNKNOWN, _("unit type %s not known\n"), optarg); } @@ -599,13 +602,13 @@ process_arguments (int argc, char **argv) mult = 1024; if (units) free(units); - units = strdup ("kB"); + units = strdup ("kiB"); break; case 'm': /* display mountpoint */ mult = 1024 * 1024; if (units) free(units); - units = strdup ("MB"); + units = strdup ("MiB"); break; case 'L': stat_remote_fs = 1; @@ -812,7 +815,7 @@ process_arguments (int argc, char **argv) } if (units == NULL) { - units = strdup ("MB"); + units = strdup ("MiB"); mult = (uintmax_t)1024 * 1024; } -- cgit v0.10-9-g596f From 8f2cfd1c805f68a21e221f9ea629800be1c88af8 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Mon, 25 Oct 2021 17:35:29 +0200 Subject: Reformat a little bit for easier reading diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 0786228..00afcad 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -288,8 +288,17 @@ main (int argc, char **argv) get_stats (path, &fsp); if (verbose >= 3) { - printf ("For %s, used_pct=%g free_pct=%g used_units=%g free_units=%g total_units=%g used_inodes_pct=%g free_inodes_pct=%g fsp.fsu_blocksize=%llu mult=%llu\n", - me->me_mountdir, path->dused_pct, path->dfree_pct, path->dused_units, path->dfree_units, path->dtotal_units, path->dused_inodes_percent, path->dfree_inodes_percent, fsp.fsu_blocksize, mult); + printf ("For %s, used_pct=%g free_pct=%g used_units=%llu free_units=%llu total_units=%llu used_inodes_pct=%g free_inodes_pct=%g fsp.fsu_blocksize=%llu mult=%llu\n", + me->me_mountdir, + path->dused_pct, + path->dfree_pct, + path->dused_units, + path->dfree_units, + path->dtotal_units, + path->dused_inodes_percent, + path->dfree_inodes_percent, + fsp.fsu_blocksize, + mult); } /* Threshold comparisons */ @@ -344,12 +353,13 @@ main (int argc, char **argv) /* Nb: *_high_tide are unset when == UINT_MAX */ xasprintf (&perf, "%s %s", perf, - perfdata ((!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, - path->dused_units, units, - (warning_high_tide != UINT_MAX ? TRUE : FALSE), warning_high_tide, - (critical_high_tide != UINT_MAX ? TRUE : FALSE), critical_high_tide, - TRUE, 0, - TRUE, path->dtotal_units)); + perfdata_uint64 ( + (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, + path->dused_units * mult, "B", + (warning_high_tide == UINT64_MAX ? FALSE : TRUE), warning_high_tide * mult, + (critical_high_tide == UINT64_MAX ? FALSE : TRUE), critical_high_tide * mult, + TRUE, 0, + TRUE, path->dtotal_units * mult)); if (display_inodes_perfdata) { /* *_high_tide must be reinitialized at each run */ @@ -366,12 +376,12 @@ main (int argc, char **argv) xasprintf (&perf_ilabel, "%s (inodes)", (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir); /* Nb: *_high_tide are unset when == UINT_MAX */ xasprintf (&perf, "%s %s", perf, - perfdata (perf_ilabel, - path->inodes_used, "", - (warning_high_tide != UINT_MAX ? TRUE : FALSE), warning_high_tide, - (critical_high_tide != UINT_MAX ? TRUE : FALSE), critical_high_tide, - TRUE, 0, - TRUE, path->inodes_total)); + perfdata_uint64 (perf_ilabel, + path->inodes_used, "", + (warning_high_tide != UINT64_MAX ? TRUE : FALSE), warning_high_tide, + (critical_high_tide != UINT64_MAX ? TRUE : FALSE), critical_high_tide, + TRUE, 0, + TRUE, path->inodes_total)); } if (disk_result==STATE_OK && erronly && !verbose) @@ -1055,8 +1065,14 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { } if (verbose >= 3) printf("Group %s now has: used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", - p->group, tmpfsp.fsu_bavail, tmpfsp.fsu_blocksize, p->best_match->me_mountdir, p->dused_units, - p->dfree_units, p->dtotal_units, mult); + p->group, + tmpfsp.fsu_bavail, + tmpfsp.fsu_blocksize, + p->best_match->me_mountdir, + p->dused_units, + p->dfree_units, + p->dtotal_units, + mult); } /* modify devname and mountdir for output */ p->best_match->me_mountdir = p->best_match->me_devname = p->group; -- cgit v0.10-9-g596f From 50fc9b73a2127c8ed1944b8e3fd5f0f7b64ca8ec Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Mon, 25 Oct 2021 17:36:58 +0200 Subject: Switch to uint64_t diff --git a/lib/utils_disk.h b/lib/utils_disk.h index 999270c..bf52e4c 100644 --- a/lib/utils_disk.h +++ b/lib/utils_disk.h @@ -27,7 +27,7 @@ struct parameter_list uintmax_t total, available, available_to_root, used, inodes_free, inodes_free_to_root, inodes_used, inodes_total; double dfree_pct, dused_pct; - double dused_units, dfree_units, dtotal_units; + uint64_t dused_units, dfree_units, dtotal_units; double dused_inodes_percent, dfree_inodes_percent; }; diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 00afcad..ecde4e5 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -172,8 +172,6 @@ main (int argc, char **argv) char *preamble; char *flag_header; double inode_space_pct; - double warning_high_tide; - double critical_high_tide; int temp_result; struct mount_entry *me; @@ -335,23 +333,23 @@ main (int argc, char **argv) */ /* *_high_tide must be reinitialized at each run */ - warning_high_tide = UINT_MAX; - critical_high_tide = UINT_MAX; + uint64_t warning_high_tide = UINT64_MAX; + uint64_t critical_high_tide = UINT64_MAX; if (path->freespace_units->warning != NULL) { warning_high_tide = path->dtotal_units - path->freespace_units->warning->end; } if (path->freespace_percent->warning != NULL) { - warning_high_tide = abs( min( (double) warning_high_tide, (double) (1.0 - path->freespace_percent->warning->end/100)*path->dtotal_units )); + warning_high_tide = llabs( min( (double) warning_high_tide, (1.0 - path->freespace_percent->warning->end / 100 * path->dtotal_units) )); } if (path->freespace_units->critical != NULL) { critical_high_tide = path->dtotal_units - path->freespace_units->critical->end; } if (path->freespace_percent->critical != NULL) { - critical_high_tide = abs( min( (double) critical_high_tide, (double) (1.0 - path->freespace_percent->critical->end/100)*path->dtotal_units )); + critical_high_tide = llabs( min( (double) critical_high_tide, (double) (1.0 - path->freespace_percent->critical->end/100)*path->dtotal_units )); } - /* Nb: *_high_tide are unset when == UINT_MAX */ + /* Nb: *_high_tide are unset when == UINT64_MAX */ xasprintf (&perf, "%s %s", perf, perfdata_uint64 ( (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, @@ -363,18 +361,18 @@ main (int argc, char **argv) if (display_inodes_perfdata) { /* *_high_tide must be reinitialized at each run */ - warning_high_tide = UINT_MAX; - critical_high_tide = UINT_MAX; + warning_high_tide = UINT64_MAX; + critical_high_tide = UINT64_MAX; if (path->freeinodes_percent->warning != NULL) { - warning_high_tide = abs( min( (double) warning_high_tide, (double) (1.0 - path->freeinodes_percent->warning->end/100)*path->inodes_total )); + warning_high_tide = llabs( min( (double) warning_high_tide, (double) (1.0 - path->freeinodes_percent->warning->end/100)*path->inodes_total )); } if (path->freeinodes_percent->critical != NULL) { - critical_high_tide = abs( min( (double) critical_high_tide, (double) (1.0 - path->freeinodes_percent->critical->end/100)*path->inodes_total )); + critical_high_tide = llabs( min( (double) critical_high_tide, (double) (1.0 - path->freeinodes_percent->critical->end/100)*path->inodes_total )); } xasprintf (&perf_ilabel, "%s (inodes)", (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir); - /* Nb: *_high_tide are unset when == UINT_MAX */ + /* Nb: *_high_tide are unset when == UINT64_MAX */ xasprintf (&perf, "%s %s", perf, perfdata_uint64 (perf_ilabel, path->inodes_used, "", @@ -392,7 +390,7 @@ main (int argc, char **argv) } else { xasprintf(&flag_header, ""); } - xasprintf (&output, "%s%s %s %.0f %s (%.0f%%", + xasprintf (&output, "%s%s %s %llu%s (%.0f%%", output, flag_header, (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, path->dfree_units, -- cgit v0.10-9-g596f From d3af7a353e75dadf283c58ad49cfe2dc81a4c9ce Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Mon, 25 Oct 2021 17:42:00 +0200 Subject: Remove useless lines and fix some formatting diff --git a/plugins/utils.c b/plugins/utils.c index f7f8952..ff0e55d 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -601,12 +601,16 @@ char *perfdata (const char *label, char *perfdata_uint64 (const char *label, uint64_t val, const char *uom, + int warnp, uint64_t warn, + int critp, uint64_t crit, + int minp, uint64_t minv, + int maxp, uint64_t maxv) { @@ -618,20 +622,16 @@ char *perfdata_uint64 (const char *label, xasprintf (&data, "%s=%ld%s;", label, val, uom); if (warnp) - xasprintf (&data, "%s%ld;", data, warn); - else - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%lu;", data, warn); if (critp) - xasprintf (&data, "%s%ld;", data, crit); - else - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%lu;", data, crit); if (minp) - xasprintf (&data, "%s%ld", data, minv); + xasprintf (&data, "%s%lu", data, minv); if (maxp) - xasprintf (&data, "%s;%ld", data, maxv); + xasprintf (&data, "%s;%lu", data, maxv); return data; } @@ -658,13 +658,9 @@ char *perfdata_int64 (const char *label, if (warnp) xasprintf (&data, "%s%ld;", data, warn); - else - xasprintf (&data, "%s;", data); if (critp) xasprintf (&data, "%s%ld;", data, crit); - else - xasprintf (&data, "%s;", data); if (minp) xasprintf (&data, "%s%ld", data, minv); -- cgit v0.10-9-g596f From 726a29a3ac4b155536099b8cae2bd517d56fb5f8 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Tue, 26 Oct 2021 12:50:14 +0200 Subject: Fix some tests diff --git a/plugins/t/check_disk.t b/plugins/t/check_disk.t index fdd8769..ec527e7 100644 --- a/plugins/t/check_disk.t +++ b/plugins/t/check_disk.t @@ -88,8 +88,9 @@ $result = NPTest->testCmd( ); $_ = $result->perf_output; my ($warn_absth_data, $crit_absth_data, $total_absth_data) = (m/=.[^;]*;(\d+);(\d+);\d+;(\d+)/); -is ($warn_absth_data, $total_absth_data - 20, "Wrong warning in perf data using absolute thresholds"); -is ($crit_absth_data, $total_absth_data - 10, "Wrong critical in perf data using absolute thresholds"); +# default unit is MiB, but perfdata is always bytes +is ($warn_absth_data, $total_absth_data - (20 * (2 ** 20)), "Wrong warning in perf data using absolute thresholds"); +is ($crit_absth_data, $total_absth_data - (10 * (2 ** 20)), "Wrong critical in perf data using absolute thresholds"); # Then check percent thresholds. $result = NPTest->testCmd( @@ -119,7 +120,7 @@ like ( $result->only_output, qr/$more_free/, "Have disk name in text"); $result = NPTest->testCmd( "./check_disk -w 1 -c 1 -p $more_free -p $less_free" ); cmp_ok( $result->return_code, '==', 0, "At least 1 MB available on $more_free and $less_free"); $_ = $result->output; -my ($free_mb_on_mp1, $free_mb_on_mp2) = (m/(\d+) MB .* (\d+) MB /g); +my ($free_mb_on_mp1, $free_mb_on_mp2) = (m/(\d+)MiB .* (\d+)MiB /g); my $free_mb_on_all = $free_mb_on_mp1 + $free_mb_on_mp2; -- cgit v0.10-9-g596f From 1c0882def0d9ce4ed5b2d443884138622e6d839b Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Tue, 26 Oct 2021 13:05:57 +0200 Subject: hopefully fix warning high tide with percentage diff --git a/plugins/check_disk.c b/plugins/check_disk.c index ecde4e5..1778b61 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -340,7 +340,7 @@ main (int argc, char **argv) warning_high_tide = path->dtotal_units - path->freespace_units->warning->end; } if (path->freespace_percent->warning != NULL) { - warning_high_tide = llabs( min( (double) warning_high_tide, (1.0 - path->freespace_percent->warning->end / 100 * path->dtotal_units) )); + warning_high_tide = llabs( min( (double) warning_high_tide, (double) (1.0 - path->freespace_percent->warning->end/100)* path->dtotal_units )); } if (path->freespace_units->critical != NULL) { critical_high_tide = path->dtotal_units - path->freespace_units->critical->end; -- cgit v0.10-9-g596f From 6e0586c8e35c3990631f73d8cdb89b70751994c3 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Tue, 26 Oct 2021 16:53:01 +0200 Subject: Reform some arithmetical operations for more clarity diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 1778b61..71eab53 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -334,19 +334,21 @@ main (int argc, char **argv) /* *_high_tide must be reinitialized at each run */ uint64_t warning_high_tide = UINT64_MAX; - uint64_t critical_high_tide = UINT64_MAX; if (path->freespace_units->warning != NULL) { - warning_high_tide = path->dtotal_units - path->freespace_units->warning->end; + warning_high_tide = (path->dtotal_units - path->freespace_units->warning->end) * mult; } if (path->freespace_percent->warning != NULL) { - warning_high_tide = llabs( min( (double) warning_high_tide, (double) (1.0 - path->freespace_percent->warning->end/100)* path->dtotal_units )); + warning_high_tide = min( warning_high_tide, (uint64_t)((1.0 - path->freespace_percent->warning->end/100) * (path->dtotal_units * mult)) ); } + + uint64_t critical_high_tide = UINT64_MAX; + if (path->freespace_units->critical != NULL) { - critical_high_tide = path->dtotal_units - path->freespace_units->critical->end; + critical_high_tide = (path->dtotal_units - path->freespace_units->critical->end) * mult; } if (path->freespace_percent->critical != NULL) { - critical_high_tide = llabs( min( (double) critical_high_tide, (double) (1.0 - path->freespace_percent->critical->end/100)*path->dtotal_units )); + critical_high_tide = min( critical_high_tide, (uint64_t)((1.0 - path->freespace_percent->critical->end/100) * (path->dtotal_units * mult)) ); } /* Nb: *_high_tide are unset when == UINT64_MAX */ @@ -354,8 +356,8 @@ main (int argc, char **argv) perfdata_uint64 ( (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, path->dused_units * mult, "B", - (warning_high_tide == UINT64_MAX ? FALSE : TRUE), warning_high_tide * mult, - (critical_high_tide == UINT64_MAX ? FALSE : TRUE), critical_high_tide * mult, + (warning_high_tide == UINT64_MAX ? FALSE : TRUE), warning_high_tide, + (critical_high_tide == UINT64_MAX ? FALSE : TRUE), critical_high_tide, TRUE, 0, TRUE, path->dtotal_units * mult)); -- cgit v0.10-9-g596f From 73ed8109e5ba1c61f8ba435fd4324318d0751f18 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Tue, 26 Oct 2021 20:47:28 +0200 Subject: Re-add separation semicolons for perfdata, which I deleted diff --git a/plugins/utils.c b/plugins/utils.c index ff0e55d..c0dce25 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -617,18 +617,22 @@ char *perfdata_uint64 (const char *label, char *data = NULL; if (strpbrk (label, "'= ")) - xasprintf (&data, "'%s'=%ld%s;", label, val, uom); + xasprintf (&data, "'%s'=%ld%s", label, val, uom); else - xasprintf (&data, "%s=%ld%s;", label, val, uom); + xasprintf (&data, "%s=%ld%s", label, val, uom); + xasprintf (&data, "%s;", data); if (warnp) - xasprintf (&data, "%s%lu;", data, warn); + xasprintf (&data, "%s%lu", data, warn); + xasprintf (&data, "%s;", data); if (critp) - xasprintf (&data, "%s%lu;", data, crit); + xasprintf (&data, "%s%lu", data, crit); + xasprintf (&data, "%s;", data); if (minp) xasprintf (&data, "%s%lu", data, minv); + xasprintf (&data, "%s;", data); if (maxp) xasprintf (&data, "%s;%lu", data, maxv); @@ -652,18 +656,22 @@ char *perfdata_int64 (const char *label, char *data = NULL; if (strpbrk (label, "'= ")) - xasprintf (&data, "'%s'=%ld%s;", label, val, uom); + xasprintf (&data, "'%s'=%ld%s", label, val, uom); else - xasprintf (&data, "%s=%ld%s;", label, val, uom); + xasprintf (&data, "%s=%ld%s", label, val, uom); + xasprintf (&data, "%s;", data); if (warnp) - xasprintf (&data, "%s%ld;", data, warn); + xasprintf (&data, "%s%ld", data, warn); + xasprintf (&data, "%s;", data); if (critp) - xasprintf (&data, "%s%ld;", data, crit); + xasprintf (&data, "%s%ld", data, crit); + xasprintf (&data, "%s;", data); if (minp) xasprintf (&data, "%s%ld", data, minv); + xasprintf (&data, "%s;", data); if (maxp) xasprintf (&data, "%s;%ld", data, maxv); -- cgit v0.10-9-g596f From 4c8ab67dd31c526d1c73653319ba537cec3000a5 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Tue, 26 Oct 2021 21:09:55 +0200 Subject: Fix my own errors for real this time and add some comments, so I wont do them again diff --git a/plugins/utils.c b/plugins/utils.c index c0dce25..ebdae2e 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -601,41 +601,39 @@ char *perfdata (const char *label, char *perfdata_uint64 (const char *label, uint64_t val, const char *uom, - - int warnp, + int warnp, /* Warning present */ uint64_t warn, - - int critp, + int critp, /* Critical present */ uint64_t crit, - - int minp, + int minp, /* Minimum present */ uint64_t minv, - - int maxp, + int maxp, /* Maximum present */ uint64_t maxv) { char *data = NULL; if (strpbrk (label, "'= ")) - xasprintf (&data, "'%s'=%ld%s", label, val, uom); + xasprintf (&data, "'%s'=%ld%s;", label, val, uom); else - xasprintf (&data, "%s=%ld%s", label, val, uom); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s=%ld%s;", label, val, uom); if (warnp) - xasprintf (&data, "%s%lu", data, warn); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%lu;", data, warn); + else + xasprintf (&data, "%s;", data); if (critp) - xasprintf (&data, "%s%lu", data, crit); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%lu;", data, crit); + else + xasprintf (&data, "%s;", data); if (minp) - xasprintf (&data, "%s%lu", data, minv); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%lu;", data, minv); + else + xasprintf (&data, "%s;", data); if (maxp) - xasprintf (&data, "%s;%lu", data, maxv); + xasprintf (&data, "%s%lu", data, maxv); return data; } @@ -644,37 +642,39 @@ char *perfdata_uint64 (const char *label, char *perfdata_int64 (const char *label, int64_t val, const char *uom, - int warnp, + int warnp, /* Warning present */ int64_t warn, - int critp, + int critp, /* Critical present */ int64_t crit, - int minp, + int minp, /* Minimum present */ int64_t minv, - int maxp, + int maxp, /* Maximum present */ int64_t maxv) { char *data = NULL; if (strpbrk (label, "'= ")) - xasprintf (&data, "'%s'=%ld%s", label, val, uom); + xasprintf (&data, "'%s'=%ld%s;", label, val, uom); else - xasprintf (&data, "%s=%ld%s", label, val, uom); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s=%ld%s;", label, val, uom); if (warnp) - xasprintf (&data, "%s%ld", data, warn); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%ld;", data, warn); + else + xasprintf (&data, "%s;", data); if (critp) - xasprintf (&data, "%s%ld", data, crit); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%ld;", data, crit); + else + xasprintf (&data, "%s;", data); if (minp) - xasprintf (&data, "%s%ld", data, minv); - xasprintf (&data, "%s;", data); + xasprintf (&data, "%s%ld;", data, minv); + else + xasprintf (&data, "%s;", data); if (maxp) - xasprintf (&data, "%s;%ld", data, maxv); + xasprintf (&data, "%s%ld", data, maxv); return data; } -- cgit v0.10-9-g596f From 5974b0481c280d8de9c52ff2d7b99fcf4be99b5d Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 27 Oct 2021 12:44:21 +0200 Subject: Remove whitespace at the end of lines diff --git a/plugins/check_disk.c b/plugins/check_disk.c index 71eab53..cc6dbb7 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -1,29 +1,29 @@ /***************************************************************************** -* +* * Monitoring check_disk plugin -* +* * License: GPL * Copyright (c) 1999-2008 Monitoring Plugins Development Team -* +* * Description: -* +* * This file contains the check_disk plugin -* -* +* +* * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. -* +* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. -* +* * You should have received a copy of the GNU General Public License * along with this program. If not, see . -* -* +* +* *****************************************************************************/ const char *progname = "check_disk"; @@ -253,7 +253,7 @@ main (int argc, char **argv) /* Remove filesystems already seen */ if (np_seen_name(seen, me->me_mountdir)) { continue; - } + } np_add_name(&seen, me->me_mountdir); if (path->group == NULL) { @@ -1039,20 +1039,20 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { if (p_list->group && ! (strcmp(p_list->group, p->group))) { stat_path(p_list); get_fs_usage (p_list->best_match->me_mountdir, p_list->best_match->me_devname, &tmpfsp); - get_path_stats(p_list, &tmpfsp); + get_path_stats(p_list, &tmpfsp); if (verbose >= 3) printf("Group %s: adding %llu blocks sized %llu, (%s) used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", p_list->group, tmpfsp.fsu_bavail, tmpfsp.fsu_blocksize, p_list->best_match->me_mountdir, p_list->dused_units, p_list->dfree_units, p_list->dtotal_units, mult); - /* prevent counting the first FS of a group twice since its parameter_list entry + /* prevent counting the first FS of a group twice since its parameter_list entry * is used to carry the information of all file systems of the entire group */ if (! first) { p->total += p_list->total; p->available += p_list->available; p->available_to_root += p_list->available_to_root; p->used += p_list->used; - + p->dused_units += p_list->dused_units; p->dfree_units += p_list->dfree_units; p->dtotal_units += p_list->dtotal_units; @@ -1063,7 +1063,7 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { } first = 0; } - if (verbose >= 3) + if (verbose >= 3) printf("Group %s now has: used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", p->group, tmpfsp.fsu_bavail, @@ -1082,7 +1082,7 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { p->dfree_pct = 100 - p->dused_pct; p->dused_inodes_percent = calculate_percent(p->inodes_total - p->inodes_free, p->inodes_total); p->dfree_inodes_percent = 100 - p->dused_inodes_percent; - + } void @@ -1097,7 +1097,7 @@ get_path_stats (struct parameter_list *p, struct fs_usage *fsp) { /* default behaviour : take all the blocks into account */ p->total = fsp->fsu_blocks; } - + p->dused_units = p->used*fsp->fsu_blocksize/mult; p->dfree_units = p->available*fsp->fsu_blocksize/mult; p->dtotal_units = p->total*fsp->fsu_blocksize/mult; -- cgit v0.10-9-g596f From 884327ee21b25be3ce1b5627bb40339e14545256 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 27 Oct 2021 12:47:08 +0200 Subject: Replace tabs with spaces and do some formatting diff --git a/plugins/check_disk.c b/plugins/check_disk.c index cc6dbb7..c526d05 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -46,7 +46,7 @@ const char *email = "devel@monitoring-plugins.org"; #include #include "fsusage.h" #include "mountlist.h" -#include "intprops.h" /* necessary for TYPE_MAXIMUM */ +#include "intprops.h" /* necessary for TYPE_MAXIMUM */ #if HAVE_LIMITS_H # include #endif @@ -243,10 +243,10 @@ main (int argc, char **argv) #ifdef __CYGWIN__ if (strncmp(path->name, "/cygdrive/", 10) != 0 || strlen(path->name) > 11) - continue; + continue; snprintf(mountdir, sizeof(mountdir), "%s:\\", me->me_mountdir + 10); if (GetDriveType(mountdir) != DRIVE_FIXED) - me->me_remote = 1; + me->me_remote = 1; #endif /* Filters */ @@ -287,16 +287,16 @@ main (int argc, char **argv) if (verbose >= 3) { printf ("For %s, used_pct=%g free_pct=%g used_units=%llu free_units=%llu total_units=%llu used_inodes_pct=%g free_inodes_pct=%g fsp.fsu_blocksize=%llu mult=%llu\n", - me->me_mountdir, - path->dused_pct, - path->dfree_pct, - path->dused_units, - path->dfree_units, - path->dtotal_units, - path->dused_inodes_percent, - path->dfree_inodes_percent, - fsp.fsu_blocksize, - mult); + me->me_mountdir, + path->dused_pct, + path->dfree_pct, + path->dused_units, + path->dfree_units, + path->dtotal_units, + path->dused_inodes_percent, + path->dfree_inodes_percent, + fsp.fsu_blocksize, + mult); } /* Threshold comparisons */ @@ -333,7 +333,7 @@ main (int argc, char **argv) */ /* *_high_tide must be reinitialized at each run */ - uint64_t warning_high_tide = UINT64_MAX; + uint64_t warning_high_tide = UINT64_MAX; if (path->freespace_units->warning != NULL) { warning_high_tide = (path->dtotal_units - path->freespace_units->warning->end) * mult; @@ -342,7 +342,7 @@ main (int argc, char **argv) warning_high_tide = min( warning_high_tide, (uint64_t)((1.0 - path->freespace_percent->warning->end/100) * (path->dtotal_units * mult)) ); } - uint64_t critical_high_tide = UINT64_MAX; + uint64_t critical_high_tide = UINT64_MAX; if (path->freespace_units->critical != NULL) { critical_high_tide = (path->dtotal_units - path->freespace_units->critical->end) * mult; @@ -353,13 +353,13 @@ main (int argc, char **argv) /* Nb: *_high_tide are unset when == UINT64_MAX */ xasprintf (&perf, "%s %s", perf, - perfdata_uint64 ( - (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, - path->dused_units * mult, "B", - (warning_high_tide == UINT64_MAX ? FALSE : TRUE), warning_high_tide, - (critical_high_tide == UINT64_MAX ? FALSE : TRUE), critical_high_tide, - TRUE, 0, - TRUE, path->dtotal_units * mult)); + perfdata_uint64 ( + (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, + path->dused_units * mult, "B", + (warning_high_tide == UINT64_MAX ? FALSE : TRUE), warning_high_tide, + (critical_high_tide == UINT64_MAX ? FALSE : TRUE), critical_high_tide, + TRUE, 0, + TRUE, path->dtotal_units * mult)); if (display_inodes_perfdata) { /* *_high_tide must be reinitialized at each run */ @@ -376,37 +376,36 @@ main (int argc, char **argv) xasprintf (&perf_ilabel, "%s (inodes)", (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir); /* Nb: *_high_tide are unset when == UINT64_MAX */ xasprintf (&perf, "%s %s", perf, - perfdata_uint64 (perf_ilabel, - path->inodes_used, "", - (warning_high_tide != UINT64_MAX ? TRUE : FALSE), warning_high_tide, - (critical_high_tide != UINT64_MAX ? TRUE : FALSE), critical_high_tide, - TRUE, 0, - TRUE, path->inodes_total)); + perfdata_uint64 (perf_ilabel, + path->inodes_used, "", + (warning_high_tide != UINT64_MAX ? TRUE : FALSE), warning_high_tide, + (critical_high_tide != UINT64_MAX ? TRUE : FALSE), critical_high_tide, + TRUE, 0, + TRUE, path->inodes_total)); } if (disk_result==STATE_OK && erronly && !verbose) continue; - if(disk_result && verbose >= 1) { - xasprintf(&flag_header, " %s [", state_text (disk_result)); - } else { - xasprintf(&flag_header, ""); - } - xasprintf (&output, "%s%s %s %llu%s (%.0f%%", - output, flag_header, - (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, - path->dfree_units, - units, - path->dfree_pct); - if (path->dused_inodes_percent < 0) { - xasprintf(&output, "%s inode=-)%s;", output, (disk_result ? "]" : "")); - } else { - xasprintf(&output, "%s inode=%.0f%%)%s;", output, path->dfree_inodes_percent, ((disk_result && verbose >= 1) ? "]" : "")); - } + if(disk_result && verbose >= 1) { + xasprintf(&flag_header, " %s [", state_text (disk_result)); + } else { + xasprintf(&flag_header, ""); + } + xasprintf (&output, "%s%s %s %llu%s (%.0f%%", + output, flag_header, + (!strcmp(me->me_mountdir, "none") || display_mntp) ? me->me_devname : me->me_mountdir, + path->dfree_units, + units, + path->dfree_pct); + if (path->dused_inodes_percent < 0) { + xasprintf(&output, "%s inode=-)%s;", output, (disk_result ? "]" : "")); + } else { + xasprintf(&output, "%s inode=%.0f%%)%s;", output, path->dfree_inodes_percent, ((disk_result && verbose >= 1) ? "]" : "")); + } free(flag_header); /* TODO: Need to do a similar debug line - xasprintf (&details, _("%s\n\ -%.0f of %.0f %s (%.0f%% inode=%.0f%%) free on %s (type %s mounted on %s) warn:%lu crit:%lu warn%%:%.0f%% crit%%:%.0f%%"), + xasprintf (&details, _("%s\n\%.0f of %.0f %s (%.0f%% inode=%.0f%%) free on %s (type %s mounted on %s) warn:%lu crit:%lu warn%%:%.0f%% crit%%:%.0f%%"), details, dfree_units, dtotal_units, units, dfree_pct, inode_space_pct, me->me_devname, me->me_type, me->me_mountdir, (unsigned long)w_df, (unsigned long)c_df, w_dfp, c_dfp); @@ -567,14 +566,14 @@ process_arguments (int argc, char **argv) } break; - case 'W': /* warning inode threshold */ + case 'W': /* warning inode threshold */ if (*optarg == '@') { warn_freeinodes_percent = optarg; } else { xasprintf(&warn_freeinodes_percent, "@%s", optarg); } break; - case 'K': /* critical inode threshold */ + case 'K': /* critical inode threshold */ if (*optarg == '@') { crit_freeinodes_percent = optarg; } else { @@ -1066,19 +1065,19 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { if (verbose >= 3) printf("Group %s now has: used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", p->group, - tmpfsp.fsu_bavail, - tmpfsp.fsu_blocksize, - p->best_match->me_mountdir, - p->dused_units, + tmpfsp.fsu_bavail, + tmpfsp.fsu_blocksize, + p->best_match->me_mountdir, + p->dused_units, p->dfree_units, - p->dtotal_units, - mult); + p->dtotal_units, + mult); } /* modify devname and mountdir for output */ p->best_match->me_mountdir = p->best_match->me_devname = p->group; } /* finally calculate percentages for either plain FS or summed up group */ - p->dused_pct = calculate_percent( p->used, p->used + p->available ); /* used + available can never be > uintmax */ + p->dused_pct = calculate_percent( p->used, p->used + p->available ); /* used + available can never be > uintmax */ p->dfree_pct = 100 - p->dused_pct; p->dused_inodes_percent = calculate_percent(p->inodes_total - p->inodes_free, p->inodes_total); p->dfree_inodes_percent = 100 - p->dused_inodes_percent; -- cgit v0.10-9-g596f From 0bd45c200b64de1918ad4546e09083c529ea39a3 Mon Sep 17 00:00:00 2001 From: Geert Hendrickx Date: Thu, 28 Oct 2021 23:08:02 +0200 Subject: check_smtp: add -L flag to support LMTP (LHLO instead of HELO/EHLO). diff --git a/plugins/check_smtp.c b/plugins/check_smtp.c index d37c57c..c1e92df 100644 --- a/plugins/check_smtp.c +++ b/plugins/check_smtp.c @@ -55,6 +55,7 @@ enum { #define SMTP_EXPECT "220" #define SMTP_HELO "HELO " #define SMTP_EHLO "EHLO " +#define SMTP_LHLO "LHLO " #define SMTP_QUIT "QUIT\r\n" #define SMTP_STARTTLS "STARTTLS\r\n" #define SMTP_AUTH_LOGIN "AUTH LOGIN\r\n" @@ -102,6 +103,7 @@ int check_critical_time = FALSE; int verbose = 0; int use_ssl = FALSE; short use_ehlo = FALSE; +short use_lhlo = FALSE; short ssl_established = 0; char *localhostname = NULL; int sd; @@ -152,7 +154,9 @@ main (int argc, char **argv) return STATE_CRITICAL; } } - if(use_ehlo) + if(use_lhlo) + xasprintf (&helocmd, "%s%s%s", SMTP_LHLO, localhostname, "\r\n"); + else if(use_ehlo) xasprintf (&helocmd, "%s%s%s", SMTP_EHLO, localhostname, "\r\n"); else xasprintf (&helocmd, "%s%s%s", SMTP_HELO, localhostname, "\r\n"); @@ -197,7 +201,7 @@ main (int argc, char **argv) if (recvlines(buffer, MAX_INPUT_BUFFER) <= 0) { printf (_("recv() failed\n")); return STATE_WARNING; - } else if(use_ehlo){ + } else if(use_ehlo || use_lhlo){ if(strstr(buffer, "250 STARTTLS") != NULL || strstr(buffer, "250-STARTTLS") != NULL){ supports_tls=TRUE; @@ -470,6 +474,7 @@ process_arguments (int argc, char **argv) {"use-ipv4", no_argument, 0, '4'}, {"use-ipv6", no_argument, 0, '6'}, {"help", no_argument, 0, 'h'}, + {"lmtp", no_argument, 0, 'L'}, {"starttls",no_argument,0,'S'}, {"certificate",required_argument,0,'D'}, {"ignore-quit-failure",no_argument,0,'q'}, @@ -489,7 +494,7 @@ process_arguments (int argc, char **argv) } while (1) { - c = getopt_long (argc, argv, "+hVv46t:p:f:e:c:w:H:C:R:SD:F:A:U:P:q", + c = getopt_long (argc, argv, "+hVv46Lt:p:f:e:c:w:H:C:R:SD:F:A:U:P:q", longopts, &option); if (c == -1 || c == EOF) @@ -616,6 +621,9 @@ process_arguments (int argc, char **argv) use_ssl = TRUE; use_ehlo = TRUE; break; + case 'L': + use_lhlo = TRUE; + break; case '4': address_family = AF_INET; break; @@ -824,6 +832,8 @@ print_help (void) printf (" %s\n", _("SMTP AUTH username")); printf (" %s\n", "-P, --authpass=STRING"); printf (" %s\n", _("SMTP AUTH password")); + printf (" %s\n", "-L, --lmtp"); + printf (" %s\n", _("Send LHLO instead of HELO/EHLO")); printf (" %s\n", "-q, --ignore-quit-failure"); printf (" %s\n", _("Ignore failure when sending QUIT command to server")); @@ -850,6 +860,6 @@ print_usage (void) printf ("%s\n", _("Usage:")); printf ("%s -H host [-p port] [-4|-6] [-e expect] [-C command] [-R response] [-f from addr]\n", progname); printf ("[-A authtype -U authuser -P authpass] [-w warn] [-c crit] [-t timeout] [-q]\n"); - printf ("[-F fqdn] [-S] [-D warn days cert expire[,crit days cert expire]] [-v] \n"); + printf ("[-F fqdn] [-S] [-L] [-D warn days cert expire[,crit days cert expire]] [-v] \n"); } -- cgit v0.10-9-g596f From 1738d14c0cae83a24927f34e11a673c7e29baa04 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 25 Oct 2021 10:15:40 +0200 Subject: check_procs: remove trailing whitespace diff --git a/plugins/check_procs.c b/plugins/check_procs.c index f7917c3..bae429d 100644 --- a/plugins/check_procs.c +++ b/plugins/check_procs.c @@ -1,34 +1,34 @@ /***************************************************************************** -* +* * Monitoring check_procs plugin -* +* * License: GPL * Copyright (c) 2000-2008 Monitoring Plugins Development Team -* +* * Description: -* +* * This file contains the check_procs plugin -* +* * Checks all processes and generates WARNING or CRITICAL states if the * specified metric is outside the required threshold ranges. The metric * defaults to number of processes. Search filters can be applied to limit * the processes to check. -* -* +* +* * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. -* +* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. -* +* * You should have received a copy of the GNU General Public License * along with this program. If not, see . -* -* +* +* *****************************************************************************/ const char *progname = "check_procs"; @@ -50,7 +50,7 @@ const char *email = "devel@monitoring-plugins.org"; int process_arguments (int, char **); int validate_arguments (void); -int convert_to_seconds (char *); +int convert_to_seconds (char *); void print_help (void); void print_usage (void); @@ -230,9 +230,9 @@ main (int argc, char **argv) procseconds = convert_to_seconds(procetime); if (verbose >= 3) - printf ("proc#=%d uid=%d vsz=%d rss=%d pid=%d ppid=%d pcpu=%.2f stat=%s etime=%s prog=%s args=%s\n", + printf ("proc#=%d uid=%d vsz=%d rss=%d pid=%d ppid=%d pcpu=%.2f stat=%s etime=%s prog=%s args=%s\n", procs, procuid, procvsz, procrss, - procpid, procppid, procpcpu, procstat, + procpid, procppid, procpcpu, procstat, procetime, procprog, procargs); /* Ignore self */ @@ -292,9 +292,9 @@ main (int argc, char **argv) procs++; if (verbose >= 2) { - printf ("Matched: uid=%d vsz=%d rss=%d pid=%d ppid=%d pcpu=%.2f stat=%s etime=%s prog=%s args=%s\n", + printf ("Matched: uid=%d vsz=%d rss=%d pid=%d ppid=%d pcpu=%.2f stat=%s etime=%s prog=%s args=%s\n", procuid, procvsz, procrss, - procpid, procppid, procpcpu, procstat, + procpid, procppid, procpcpu, procstat, procetime, procprog, procargs); } @@ -320,7 +320,7 @@ main (int argc, char **argv) result = max_state (result, i); } } - } + } /* This should not happen */ else if (verbose) { printf(_("Not parseable: %s"), input_buffer); @@ -332,7 +332,7 @@ main (int argc, char **argv) return STATE_UNKNOWN; } - if ( result == STATE_UNKNOWN ) + if ( result == STATE_UNKNOWN ) result = STATE_OK; /* Needed if procs found, but none match filter */ @@ -352,9 +352,9 @@ main (int argc, char **argv) if (metric != METRIC_PROCS) { printf (_("%d crit, %d warn out of "), crit, warn); } - } + } printf (ngettext ("%d process", "%d processes", (unsigned long) procs), procs); - + if (strcmp(fmt,"") != 0) { printf (_(" with %s"), fmt); } @@ -440,7 +440,7 @@ process_arguments (int argc, char **argv) break; case 'c': /* critical threshold */ critical_range = optarg; - break; + break; case 'w': /* warning threshold */ warning_range = optarg; break; @@ -542,11 +542,11 @@ process_arguments (int argc, char **argv) if ( strcmp(optarg, "PROCS") == 0) { metric = METRIC_PROCS; break; - } + } else if ( strcmp(optarg, "VSZ") == 0) { metric = METRIC_VSZ; break; - } + } else if ( strcmp(optarg, "RSS") == 0 ) { metric = METRIC_RSS; break; @@ -559,7 +559,7 @@ process_arguments (int argc, char **argv) metric = METRIC_ELAPSED; break; } - + usage4 (_("Metric must be one of PROCS, VSZ, RSS, CPU, ELAPSED!")); case 'k': /* linux kernel thread filter */ kthread_filter = 1; @@ -642,7 +642,7 @@ convert_to_seconds(char *etime) { seconds = 0; for (ptr = etime; *ptr != '\0'; ptr++) { - + if (*ptr == '-') { hyphcnt++; continue; -- cgit v0.10-9-g596f From 282ccd4a8bbaa5d99c7c0cf6eba963ee3c0bff3a Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Mon, 25 Oct 2021 17:28:17 +0200 Subject: check_procs: improve ps args autodetection one of the first ps commands in the configure.ac is `axwo 'stat comm vsz rss user uid pid ppid args'` which works on most modern linux systems (checked debian 10/11 and centos 7/8). But this test misses the etime argument. Therefore `check_procs --metric=ELAPSED` does not work. To fix this, we simply do the same test including etime before that one. Signed-off-by: Sven Nierlein diff --git a/configure.ac b/configure.ac index 7c17dcd..dfc37b5 100644 --- a/configure.ac +++ b/configure.ac @@ -783,6 +783,16 @@ dnl ac_cv_ps_format=["%*s %d %d %d %d %*d %*d %d %d%*[ 0123456789abcdef]%[OSRZT dnl ac_cv_ps_cols=8 dnl AC_MSG_RESULT([$ac_cv_ps_command]) +dnl This one is the exact same test as the next one but includes etime +elif ps axwo 'stat comm vsz rss user uid pid ppid etime args' 2>/dev/null | \ + egrep -i ["^ *STAT +[UCOMAND]+ +VSZ +RSS +USER +UID +PID +PPID +ELAPSED +COMMAND"] > /dev/null +then + ac_cv_ps_varlist="[procstat,&procuid,&procpid,&procppid,&procvsz,&procrss,&procpcpu,procetime,procprog,&pos]" + ac_cv_ps_command="$PATH_TO_PS axwo 'stat uid pid ppid vsz rss pcpu etime comm args'" + ac_cv_ps_format="%s %d %d %d %d %d %f %s %s %n" + ac_cv_ps_cols=10 + AC_MSG_RESULT([$ac_cv_ps_command]) + dnl Some gnu/linux systems (debian for one) don't like -axwo and need axwo. dnl so test for this first... elif ps axwo 'stat comm vsz rss user uid pid ppid args' 2>/dev/null | \ diff --git a/plugins/tests/check_procs.t b/plugins/tests/check_procs.t index 54d43d9..7f612e8 100755 --- a/plugins/tests/check_procs.t +++ b/plugins/tests/check_procs.t @@ -69,9 +69,13 @@ SKIP: { like( $result->output, '/^PROCS OK: 0 processes with UID = -2 \(nobody\), args \'UsB\'/', "Output correct" ); }; -$result = NPTest->testCmd( "$command --ereg-argument-array='mdworker.*501'" ); -is( $result->return_code, 0, "Checking regexp search of arguments" ); -is( $result->output, "PROCS OK: 1 process with regex args 'mdworker.*501' | procs=1;;;0;", "Output correct" ); +SKIP: { + skip 'check_procs is compiled with etime format support', 2 if `$command -vvv` =~ m/etime/mx; + + $result = NPTest->testCmd( "$command --ereg-argument-array='mdworker.*501'" ); + is( $result->return_code, 0, "Checking regexp search of arguments" ); + is( $result->output, "PROCS OK: 1 process with regex args 'mdworker.*501' | procs=1;;;0;", "Output correct" ); +} $result = NPTest->testCmd( "$command --vsz 1000000" ); is( $result->return_code, 0, "Checking filter by VSZ" ); @@ -129,4 +133,3 @@ is( $result->output, 'RSS CRITICAL: 5 crit, 0 warn out of 95 processes [WindowSe $result = NPTest->testCmd( "$command --ereg-argument-array='(nosuchname|nosuch2name)'" ); is( $result->return_code, 0, "Checking no pipe symbol in output" ); is( $result->output, "PROCS OK: 0 processes with regex args '(nosuchname,nosuch2name)' | procs=0;;;0;", "Output correct" ); - -- cgit v0.10-9-g596f From 1fda28f12424be232ac88399e72e95c2bc2d5421 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 26 Oct 2021 11:16:38 +0200 Subject: remove unused test file Signed-off-by: Sven Nierlein diff --git a/plugins/tests/var/ps_axwo.debian b/plugins/tests/var/ps_axwo.debian deleted file mode 100644 index 37a2d35..0000000 --- a/plugins/tests/var/ps_axwo.debian +++ /dev/null @@ -1,84 +0,0 @@ -STAT UID PID PPID VSZ RSS %CPU COMMAND COMMAND -S 0 1 0 1504 428 0.0 init init [2] -SN 0 2 1 0 0 0.0 ksoftirqd/0 [ksoftirqd/0] -S< 0 3 1 0 0 0.0 events/0 [events/0] -S< 0 4 3 0 0 0.0 khelper [khelper] -S< 0 5 3 0 0 0.0 kacpid [kacpid] -S< 0 38 3 0 0 0.0 kblockd/0 [kblockd/0] -S 0 48 3 0 0 0.0 pdflush [pdflush] -S< 0 51 3 0 0 0.0 aio/0 [aio/0] -S 0 50 1 0 0 0.0 kswapd0 [kswapd0] -S 0 193 1 0 0 0.0 kseriod [kseriod] -S 0 214 1 0 0 0.0 scsi_eh_0 [scsi_eh_0] -S 0 221 1 0 0 0.0 khubd [khubd] -S 0 299 1 0 0 0.3 kjournald [kjournald] -S 0 1148 1 0 0 0.0 pciehpd_event [pciehpd_event] -S 0 1168 1 0 0 0.0 shpchpd_event [shpchpd_event] -Ss 1 1795 1 1612 276 0.0 portmap /sbin/portmap -Ss 0 2200 1 1652 568 0.0 vmware-guestd /usr/sbin/vmware-guestd --background /var/run/vmware-guestd.pid -Ss 0 2209 1 2240 532 0.0 inetd /usr/sbin/inetd -Ss 0 2319 1 3468 792 0.0 sshd /usr/sbin/sshd -Ss 0 2323 1 2468 676 0.0 rpc.statd /sbin/rpc.statd -Ss 1 2332 1 1684 488 0.0 atd /usr/sbin/atd -Ss 0 2335 1 1764 636 0.0 cron /usr/sbin/cron -Ss+ 0 2350 1 1500 348 0.0 getty /sbin/getty 38400 tty1 -Ss+ 0 2351 1 1500 348 0.0 getty /sbin/getty 38400 tty2 -Ss+ 0 2352 1 1500 348 0.0 getty /sbin/getty 38400 tty3 -Ss+ 0 2353 1 1500 348 0.0 getty /sbin/getty 38400 tty4 -Ss+ 0 2354 1 1500 348 0.0 getty /sbin/getty 38400 tty5 -Ss+ 0 2355 1 1500 348 0.0 getty /sbin/getty 38400 tty6 -S 0 6907 1 2308 892 0.0 mysqld_safe /bin/sh /usr/bin/mysqld_safe -S 103 6944 6907 123220 27724 0.0 mysqld /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock -S 0 6945 6907 1488 420 0.0 logger logger -p daemon.err -t mysqld_safe -i -t mysqld -S 1001 17778 1 6436 1588 0.0 snmpd /usr/sbin/snmpd -u nagios -Lsd -Lf /dev/null -p/var/run/snmpd.pid -Ss 0 17789 1 9496 5556 0.0 snmptrapd /usr/sbin/snmptrapd -t -m ALL -M /usr/share/snmp/mibs:/usr/local/monitoring/snmp/load -p /var/run/snmptrapd.pid -Ss 0 847 2319 14452 1752 0.0 sshd sshd: tonvoon [priv] -S 1000 857 847 14616 1832 0.0 sshd sshd: tonvoon@pts/3 -Ss 1000 860 857 2984 1620 0.0 bash -bash -S 0 868 860 2588 1428 0.0 bash -su -S+ 1001 877 868 2652 1568 0.0 bash -su -S 0 6086 3 0 0 0.0 pdflush [pdflush] -Ss 0 17832 2319 14452 1752 0.0 sshd sshd: tonvoon [priv] -S 1000 18155 17832 14620 1840 0.0 sshd sshd: tonvoon@pts/0 -Ss 1000 18156 18155 2984 1620 0.0 bash -bash -S 0 18518 18156 2588 1428 0.0 bash -su -S 1001 18955 18518 2672 1600 0.0 bash -su -Ss 0 21683 2319 14452 1756 0.0 sshd sshd: tonvoon [priv] -S 1000 21742 21683 14620 1896 0.0 sshd sshd: tonvoon@pts/1 -Ss 1000 21743 21742 2984 1620 0.0 bash -bash -S 0 21748 21743 2592 1432 0.0 bash -su -S 1001 21757 21748 2620 1540 0.0 bash -su -Ss 0 2334 2319 14452 1756 0.0 sshd sshd: tonvoon [priv] -S 1000 2343 2334 14620 1840 0.0 sshd sshd: tonvoon@pts/2 -Ss 1000 2344 2343 2984 1620 0.0 bash -bash -S 0 2349 2344 2592 1432 0.0 bash -su -S+ 1001 2364 2349 2620 1520 0.0 bash -su -T 1001 2454 2364 2096 1032 0.0 vi vi configure.in.rej -S+ 1001 8500 21757 69604 52576 0.0 opsview_web_ser /usr/bin/perl -w ./script/opsview_web_server.pl -f -d -Ss 0 7609 2319 14452 1756 0.0 sshd sshd: tonvoon [priv] -S 1000 7617 7609 14460 1828 0.0 sshd sshd: tonvoon@pts/4 -Ss 1000 7618 7617 2984 1620 0.0 bash -bash -S 0 7623 7618 2592 1432 0.0 bash -su -S+ 1001 7632 7623 2620 1528 0.0 bash -su -Ss 1001 12678 1 20784 17728 0.0 opsviewd opsviewd -Ss 0 832 1 14512 6360 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -S 33 842 832 14648 6596 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -S 33 843 832 14512 6504 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -S 33 844 832 14512 6476 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -S 33 845 832 14512 6476 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -S 33 846 832 14512 6476 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -Ss 7 4081 1 2464 884 0.0 lpd /usr/sbin/lpd -s -S 33 26484 832 14512 6476 0.0 apache2 /usr/sbin/apache2 -k start -DSSL -Ss 1001 22324 1 20252 1612 0.1 nagios ../../bin/nagios -d /usr/local/nagios/etc/nagios.cfg -Ss 0 23336 2319 14452 1756 0.0 sshd sshd: tonvoon [priv] -S 1000 23339 23336 14620 1840 0.0 sshd sshd: tonvoon@pts/5 -Ss 1000 23340 23339 2996 1636 0.0 bash -bash -S 0 23367 23340 3020 1628 0.0 bash bash -S 1001 23370 23367 3064 1748 0.0 bash bash -Ss 1001 23783 1 3220 764 0.0 ndo2db /usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg -Ss 1001 23784 1 6428 4948 0.0 import_ndologsd import_ndologsd -S+ 1001 9803 18955 4132 1936 0.0 ssh ssh altinity@cube02.lei.altinity -S 1001 22505 22324 20256 1616 0.0 nagios ../../bin/nagios -d /usr/local/nagios/etc/nagios.cfg -S 1001 22506 22505 1676 608 0.0 check_ping /usr/local/libexec/check_ping -H 192.168.10.23 -w 3000.0,80% -c 5000.0,100% -p 1 -S 1001 22507 22506 1660 492 0.0 ping /bin/ping -n -U -w 10 -c 1 192.168.10.23 -R+ 1001 22508 23370 2308 680 0.0 ps ps axwo stat uid pid ppid vsz rss pcpu comm args -- cgit v0.10-9-g596f From c3abdb9267567ac9b40ef4a8f3b585c7ab87bac6 Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Tue, 26 Oct 2021 13:34:02 +0200 Subject: check_procs: add test for elapsed time diff --git a/plugins/tests/check_procs.t b/plugins/tests/check_procs.t index 7f612e8..fcea404 100755 --- a/plugins/tests/check_procs.t +++ b/plugins/tests/check_procs.t @@ -8,13 +8,14 @@ use Test::More; use NPTest; if (-x "./check_procs") { - plan tests => 50; + plan tests => 52; } else { plan skip_all => "No check_procs compiled"; } my $result; -my $command = "./check_procs --input-file=tests/var/ps-axwo.darwin"; +my $command = "./check_procs --input-file=tests/var/ps-axwo.darwin"; +my $cmd_etime = "./check_procs --input-file=tests/var/ps-axwo.debian"; $result = NPTest->testCmd( "$command" ); is( $result->return_code, 0, "Run with no options" ); @@ -77,6 +78,14 @@ SKIP: { is( $result->output, "PROCS OK: 1 process with regex args 'mdworker.*501' | procs=1;;;0;", "Output correct" ); } +SKIP: { + skip 'check_procs is compiled without etime format support', 2 if `$cmd_etime -vvv` !~ m/etime/mx; + + $result = NPTest->testCmd( "$cmd_etime -m ELAPSED -C apache2 -w 1000 -c 2000" ); + is( $result->return_code, 2, "Checking elapsed time threshold" ); + is( $result->output, "ELAPSED CRITICAL: 10 crit, 0 warn out of 10 processes with command name 'apache2' | procs=10;;;0; procs_warn=0;;;0; procs_crit=10;;;0;", "Output correct" ); +} + $result = NPTest->testCmd( "$command --vsz 1000000" ); is( $result->return_code, 0, "Checking filter by VSZ" ); is( $result->output, 'PROCS OK: 24 processes with VSZ >= 1000000 | procs=24;;;0;', "Output correct" ); diff --git a/plugins/tests/var/ps-axwo.debian b/plugins/tests/var/ps-axwo.debian new file mode 100644 index 0000000..5889e9a --- /dev/null +++ b/plugins/tests/var/ps-axwo.debian @@ -0,0 +1,219 @@ +STAT UID PID PPID VSZ RSS %CPU ELAPSED COMMAND COMMAND +Ss 0 1 0 167244 7144 0.1 26-03:07:26 systemd /lib/systemd/systemd --system --deserialize 17 +S 0 2 0 0 0 0.0 26-03:07:26 kthreadd [kthreadd] +I< 0 3 2 0 0 0.0 26-03:07:26 rcu_gp [rcu_gp] +I< 0 4 2 0 0 0.0 26-03:07:26 rcu_par_gp [rcu_par_gp] +I< 0 6 2 0 0 0.0 26-03:07:26 kworker/0:0H-ev [kworker/0:0H-events_highpri] +I< 0 9 2 0 0 0.0 26-03:07:26 mm_percpu_wq [mm_percpu_wq] +S 0 10 2 0 0 0.0 26-03:07:26 rcu_tasks_rude_ [rcu_tasks_rude_] +S 0 11 2 0 0 0.0 26-03:07:26 rcu_tasks_trace [rcu_tasks_trace] +S 0 12 2 0 0 0.0 26-03:07:26 ksoftirqd/0 [ksoftirqd/0] +I 0 13 2 0 0 0.0 26-03:07:26 rcu_sched [rcu_sched] +S 0 14 2 0 0 0.0 26-03:07:26 migration/0 [migration/0] +S 0 15 2 0 0 0.0 26-03:07:26 cpuhp/0 [cpuhp/0] +S 0 16 2 0 0 0.0 26-03:07:26 cpuhp/1 [cpuhp/1] +S 0 17 2 0 0 0.0 26-03:07:26 migration/1 [migration/1] +S 0 18 2 0 0 0.0 26-03:07:26 ksoftirqd/1 [ksoftirqd/1] +I< 0 20 2 0 0 0.0 26-03:07:26 kworker/1:0H-ev [kworker/1:0H-events_highpri] +S 0 21 2 0 0 0.0 26-03:07:26 cpuhp/2 [cpuhp/2] +S 0 22 2 0 0 0.0 26-03:07:26 migration/2 [migration/2] +S 0 23 2 0 0 0.0 26-03:07:26 ksoftirqd/2 [ksoftirqd/2] +I< 0 25 2 0 0 0.0 26-03:07:26 kworker/2:0H-ev [kworker/2:0H-events_highpri] +S 0 26 2 0 0 0.0 26-03:07:26 cpuhp/3 [cpuhp/3] +S 0 27 2 0 0 0.0 26-03:07:26 migration/3 [migration/3] +S 0 28 2 0 0 0.0 26-03:07:26 ksoftirqd/3 [ksoftirqd/3] +I< 0 30 2 0 0 0.0 26-03:07:26 kworker/3:0H-ev [kworker/3:0H-events_highpri] +S 0 35 2 0 0 0.0 26-03:07:26 kdevtmpfs [kdevtmpfs] +I< 0 36 2 0 0 0.0 26-03:07:26 netns [netns] +S 0 37 2 0 0 0.0 26-03:07:26 kauditd [kauditd] +S 0 38 2 0 0 0.0 26-03:07:26 khungtaskd [khungtaskd] +S 0 39 2 0 0 0.0 26-03:07:26 oom_reaper [oom_reaper] +I< 0 40 2 0 0 0.0 26-03:07:26 writeback [writeback] +S 0 41 2 0 0 0.0 26-03:07:26 kcompactd0 [kcompactd0] +SN 0 42 2 0 0 0.0 26-03:07:26 ksmd [ksmd] +SN 0 43 2 0 0 0.0 26-03:07:26 khugepaged [khugepaged] +I< 0 62 2 0 0 0.0 26-03:07:26 kintegrityd [kintegrityd] +I< 0 63 2 0 0 0.0 26-03:07:26 kblockd [kblockd] +I< 0 64 2 0 0 0.0 26-03:07:26 blkcg_punt_bio [blkcg_punt_bio] +I< 0 65 2 0 0 0.0 26-03:07:26 edac-poller [edac-poller] +I< 0 66 2 0 0 0.0 26-03:07:26 devfreq_wq [devfreq_wq] +I< 0 67 2 0 0 0.0 26-03:07:26 kworker/2:1H-ev [kworker/2:1H-events_highpri] +S 0 70 2 0 0 0.3 26-03:07:25 kswapd0 [kswapd0] +I< 0 71 2 0 0 0.0 26-03:07:25 kthrotld [kthrotld] +I< 0 72 2 0 0 0.0 26-03:07:25 acpi_thermal_pm [acpi_thermal_pm] +I< 0 74 2 0 0 0.0 26-03:07:25 ipv6_addrconf [ipv6_addrconf] +I< 0 80 2 0 0 0.0 26-03:07:25 kworker/3:1H-ev [kworker/3:1H-events_highpri] +I< 0 84 2 0 0 0.0 26-03:07:25 kstrp [kstrp] +I< 0 87 2 0 0 0.0 26-03:07:25 zswap-shrink [zswap-shrink] +I< 0 110 2 0 0 0.0 26-03:07:25 kworker/0:1H-ev [kworker/0:1H-events_highpri] +I< 0 141 2 0 0 0.0 26-03:07:25 ata_sff [ata_sff] +S 0 143 2 0 0 0.0 26-03:07:25 scsi_eh_0 [scsi_eh_0] +I< 0 144 2 0 0 0.0 26-03:07:25 scsi_tmf_0 [scsi_tmf_0] +S 0 145 2 0 0 0.0 26-03:07:25 scsi_eh_1 [scsi_eh_1] +I< 0 146 2 0 0 0.0 26-03:07:25 scsi_tmf_1 [scsi_tmf_1] +S 0 147 2 0 0 0.0 26-03:07:25 scsi_eh_2 [scsi_eh_2] +I< 0 148 2 0 0 0.0 26-03:07:25 scsi_tmf_2 [scsi_tmf_2] +S 0 149 2 0 0 0.0 26-03:07:25 scsi_eh_3 [scsi_eh_3] +I< 0 150 2 0 0 0.0 26-03:07:25 scsi_tmf_3 [scsi_tmf_3] +S 0 151 2 0 0 0.0 26-03:07:25 scsi_eh_4 [scsi_eh_4] +I< 0 152 2 0 0 0.0 26-03:07:25 scsi_tmf_4 [scsi_tmf_4] +S 0 153 2 0 0 0.0 26-03:07:25 scsi_eh_5 [scsi_eh_5] +I< 0 154 2 0 0 0.0 26-03:07:25 scsi_tmf_5 [scsi_tmf_5] +S 0 158 2 0 0 0.0 26-03:07:25 card0-crtc0 [card0-crtc0] +S 0 159 2 0 0 0.0 26-03:07:25 card0-crtc1 [card0-crtc1] +S 0 160 2 0 0 0.0 26-03:07:25 card0-crtc2 [card0-crtc2] +I< 0 162 2 0 0 0.0 26-03:07:25 kworker/1:1H-ev [kworker/1:1H-events_highpri] +S 0 163 2 0 0 0.0 26-03:07:25 scsi_eh_6 [scsi_eh_6] +I< 0 164 2 0 0 0.0 26-03:07:25 scsi_tmf_6 [scsi_tmf_6] +S 0 165 2 0 0 0.0 26-03:07:25 usb-storage [usb-storage] +I< 0 167 2 0 0 0.0 26-03:07:25 uas [uas] +I< 0 176 2 0 0 0.0 26-03:07:25 kdmflush [kdmflush] +I< 0 177 2 0 0 0.0 26-03:07:25 kdmflush [kdmflush] +S 0 202 2 0 0 0.0 26-03:07:24 scsi_eh_7 [scsi_eh_7] +I< 0 203 2 0 0 0.0 26-03:07:24 scsi_tmf_7 [scsi_tmf_7] +S 0 204 2 0 0 0.0 26-03:07:24 usb-storage [usb-storage] +I< 0 232 2 0 0 0.0 26-03:07:23 btrfs-worker [btrfs-worker] +I< 0 233 2 0 0 0.0 26-03:07:23 btrfs-worker-hi [btrfs-worker-hi] +I< 0 234 2 0 0 0.0 26-03:07:23 btrfs-delalloc [btrfs-delalloc] +I< 0 235 2 0 0 0.0 26-03:07:23 btrfs-flush_del [btrfs-flush_del] +I< 0 236 2 0 0 0.0 26-03:07:23 btrfs-cache [btrfs-cache] +I< 0 237 2 0 0 0.0 26-03:07:23 btrfs-fixup [btrfs-fixup] +I< 0 238 2 0 0 0.0 26-03:07:23 btrfs-endio [btrfs-endio] +I< 0 239 2 0 0 0.0 26-03:07:23 btrfs-endio-met [btrfs-endio-met] +I< 0 240 2 0 0 0.0 26-03:07:23 btrfs-endio-met [btrfs-endio-met] +I< 0 241 2 0 0 0.0 26-03:07:23 btrfs-endio-rai [btrfs-endio-rai] +I< 0 242 2 0 0 0.0 26-03:07:23 btrfs-rmw [btrfs-rmw] +I< 0 243 2 0 0 0.0 26-03:07:23 btrfs-endio-wri [btrfs-endio-wri] +I< 0 244 2 0 0 0.0 26-03:07:23 btrfs-freespace [btrfs-freespace] +I< 0 245 2 0 0 0.0 26-03:07:23 btrfs-delayed-m [btrfs-delayed-m] +I< 0 246 2 0 0 0.0 26-03:07:23 btrfs-readahead [btrfs-readahead] +I< 0 247 2 0 0 0.0 26-03:07:23 btrfs-qgroup-re [btrfs-qgroup-re] +S 0 248 2 0 0 0.0 26-03:07:23 btrfs-cleaner [btrfs-cleaner] +S 0 249 2 0 0 0.2 26-03:07:23 btrfs-transacti [btrfs-transacti] +I< 0 317 2 0 0 0.0 26-03:07:22 rpciod [rpciod] +I< 0 322 2 0 0 0.0 26-03:07:22 xprtiod [xprtiod] +S 0 381 2 0 0 0.0 26-03:07:22 irq/133-mei_me [irq/133-mei_me] +S 0 422 2 0 0 0.0 26-03:07:22 watchdogd [watchdogd] +I< 0 523 2 0 0 0.0 26-03:07:22 led_workqueue [led_workqueue] +I< 0 583 2 0 0 0.0 26-03:07:22 cryptd [cryptd] +I< 0 590 2 0 0 0.0 26-03:07:22 ext4-rsv-conver [ext4-rsv-conver] +Ss 104 693 1 12324 4292 0.5 26-03:07:21 dbus-daemon /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only +Ss 0 731 1 575120 1368 0.0 26-03:07:21 systemd-logind /lib/systemd/systemd-logind +Ssl 0 1111 1 121248 732 0.0 26-03:07:18 unattended-upgr /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal +S 0 1141 2 0 0 0.0 26-03:07:18 lockd [lockd] +I< 0 1459 2 0 0 0.0 26-03:07:16 nfsiod [nfsiod] +S 0 1621 2 0 0 0.0 26-03:07:15 NFSv4 callback [NFSv4 callback] +Ssl 0 1771 1 1548340 676 0.0 26-03:07:13 libvirtd /usr/sbin/libvirtd +I< 0 24315 2 0 0 0.0 26-02:49:02 cifsiod [cifsiod] +I< 0 24316 2 0 0 0.0 26-02:49:02 smb3decryptd [smb3decryptd] +I< 0 24317 2 0 0 0.0 26-02:49:02 cifsfileinfoput [cifsfileinfoput] +I< 0 24318 2 0 0 0.0 26-02:49:02 cifsoplockd [cifsoplockd] +I< 0 24319 2 0 0 0.0 26-02:49:02 cifs-dfscache [cifs-dfscache] +S 0 24322 2 0 0 0.0 26-02:49:02 cifsd [cifsd] +I< 0 24413 2 0 0 0.0 26-02:48:57 btrfs-worker [btrfs-worker] +I< 0 24414 2 0 0 0.0 26-02:48:57 btrfs-worker-hi [btrfs-worker-hi] +I< 0 24415 2 0 0 0.0 26-02:48:57 btrfs-delalloc [btrfs-delalloc] +I< 0 24416 2 0 0 0.0 26-02:48:57 btrfs-flush_del [btrfs-flush_del] +I< 0 24418 2 0 0 0.0 26-02:48:57 btrfs-cache [btrfs-cache] +I< 0 24419 2 0 0 0.0 26-02:48:57 btrfs-fixup [btrfs-fixup] +I< 0 24420 2 0 0 0.0 26-02:48:57 btrfs-endio [btrfs-endio] +I< 0 24421 2 0 0 0.0 26-02:48:57 btrfs-endio-met [btrfs-endio-met] +I< 0 24422 2 0 0 0.0 26-02:48:57 btrfs-endio-met [btrfs-endio-met] +I< 0 24423 2 0 0 0.0 26-02:48:57 btrfs-endio-rai [btrfs-endio-rai] +I< 0 24424 2 0 0 0.0 26-02:48:57 btrfs-rmw [btrfs-rmw] +I< 0 24425 2 0 0 0.0 26-02:48:57 btrfs-endio-wri [btrfs-endio-wri] +I< 0 24426 2 0 0 0.0 26-02:48:57 btrfs-freespace [btrfs-freespace] +I< 0 24427 2 0 0 0.0 26-02:48:57 btrfs-delayed-m [btrfs-delayed-m] +I< 0 24428 2 0 0 0.0 26-02:48:57 btrfs-readahead [btrfs-readahead] +I< 0 24429 2 0 0 0.0 26-02:48:57 btrfs-qgroup-re [btrfs-qgroup-re] +S 0 24450 2 0 0 0.0 26-02:48:53 btrfs-cleaner [btrfs-cleaner] +S 0 24451 2 0 0 0.0 26-02:48:53 btrfs-transacti [btrfs-transacti] +I< 0 747708 2 0 0 0.0 16-21:06:20 xfsalloc [xfsalloc] +I< 0 747709 2 0 0 0.0 16-21:06:20 xfs_mru_cache [xfs_mru_cache] +S 0 747713 2 0 0 0.0 16-21:06:20 jfsIO [jfsIO] +S 0 747714 2 0 0 0.0 16-21:06:20 jfsCommit [jfsCommit] +S 0 747715 2 0 0 0.0 16-21:06:20 jfsCommit [jfsCommit] +S 0 747716 2 0 0 0.0 16-21:06:20 jfsCommit [jfsCommit] +S 0 747717 2 0 0 0.0 16-21:06:20 jfsCommit [jfsCommit] +S 0 747718 2 0 0 0.0 16-21:06:20 jfsSync [jfsSync] +Ss 0 1071687 1 105976 28304 0.0 3-03:12:31 systemd-journal /lib/systemd/systemd-journald +Ss 0 1934146 1 25672 4704 0.0 11:19:31 cupsd /usr/sbin/cupsd -l +Ssl 0 1934148 1 182868 8540 0.0 11:19:31 cups-browsed /usr/sbin/cups-browsed +S 13 1934155 3392655 5752 88 0.0 11:19:31 pinger (pinger) +S< 33 1934166 3393034 57996 5460 0.0 11:19:31 apache2 /usr/sbin/apache2 -k start +S< 33 1934167 3393034 216944 13892 0.0 11:19:30 apache2 /usr/sbin/apache2 -k start +S< 33 1934168 3393034 216944 13756 0.0 11:19:30 apache2 /usr/sbin/apache2 -k start +S< 33 1934169 3393034 216936 13732 0.0 11:19:30 apache2 /usr/sbin/apache2 -k start +S< 33 1934170 3393034 216944 13888 0.0 11:19:30 apache2 /usr/sbin/apache2 -k start +S< 33 1934172 3393034 216944 15388 0.0 11:19:30 apache2 /usr/sbin/apache2 -k start +S< 33 1934701 3393034 216936 13736 0.0 11:19:29 apache2 /usr/sbin/apache2 -k start +S< 33 1935056 3393034 216920 13724 0.0 11:19:28 apache2 /usr/sbin/apache2 -k start +S 7 1936834 1934146 16652 832 0.0 11:18:12 dbus /usr/lib/cups/notifier/dbus dbus:// +S< 33 1955909 3393034 216928 13792 0.0 11:00:25 apache2 /usr/sbin/apache2 -k start +I< 0 2531464 2 0 0 0.0 06:35:47 kworker/u9:0-i9 [kworker/u9:0-i915_flip] +I 0 2570506 2 0 0 0.0 06:27:41 kworker/1:0-cgr [kworker/1:0-cgroup_destroy] +I 0 2596195 2 0 0 0.0 06:21:52 kworker/1:1-eve [kworker/1:1-events] +I 0 2785341 2 0 0 0.0 03:34:16 kworker/u8:8-bt [kworker/u8:8-btrfs-endio-write] +I 0 2785520 2 0 0 0.0 03:33:50 kworker/3:0-eve [kworker/3:0-events] +I 0 2798669 2 0 0 0.0 03:21:09 kworker/u8:5-bt [kworker/u8:5-btrfs-endio-write] +Ss 0 2803015 1 5616 3108 0.0 03:17:54 cron /usr/sbin/cron -f +I 0 2845483 2 0 0 0.0 02:38:11 kworker/0:3-eve [kworker/0:3-events] +I 0 2939490 2 0 0 0.1 01:10:32 kworker/0:0-eve [kworker/0:0-events] +I 0 2939754 2 0 0 0.0 01:10:26 kworker/u8:1-i9 [kworker/u8:1-i915] +I 0 2942040 2 0 0 0.0 01:08:02 kworker/u8:7-bt [kworker/u8:7-btrfs-endio-meta] +S 117 2954268 3392551 40044 5772 0.0 56:37 pickup pickup -l -t unix -u -c +I 0 2965195 2 0 0 0.0 46:00 kworker/u8:0-bt [kworker/u8:0-btrfs-worker] +I 0 2977972 2 0 0 0.0 33:54 kworker/u8:2-bt [kworker/u8:2-btrfs-endio-write] +I 0 2985488 2 0 0 0.0 27:02 kworker/u8:3-bl [kworker/u8:3-blkcg_punt_bio] +I 0 2987519 2 0 0 1.0 25:15 kworker/2:1-eve [kworker/2:1-events] +I 0 2987601 2 0 0 0.0 25:03 kworker/u8:9-i9 [kworker/u8:9-i915] +I< 0 2995218 2 0 0 0.0 18:41 kworker/u9:2-xp [kworker/u9:2-xprtiod] +I 0 2997170 2 0 0 0.0 16:41 kworker/3:1-rcu [kworker/3:1-rcu_gp] +I 0 3001264 2 0 0 0.0 13:01 kworker/u8:4-bt [kworker/u8:4-btrfs-endio-write] +I 0 3004697 2 0 0 0.7 09:41 kworker/2:0-eve [kworker/2:0-events] +I 0 3010619 2 0 0 1.0 04:29 kworker/2:2-eve [kworker/2:2-events] +I 0 3014612 2 0 0 0.0 00:41 kworker/3:2-eve [kworker/3:2-events] +S 0 3015082 2803015 6716 3028 0.0 00:30 cron /usr/sbin/CRON -f +I 0 3015382 2 0 0 0.0 00:00 kworker/u8:6-bt [kworker/u8:6-btrfs-endio-meta] +Ss 1 3392068 1 5592 504 0.0 15-02:34:39 atd /usr/sbin/atd -f +Ssl 0 3392072 1 235796 1740 0.0 15-02:34:39 accounts-daemon /usr/libexec/accounts-daemon +Ssl 106 3392076 1 315708 6128 0.0 15-02:34:39 colord /usr/libexec/colord +Ss 0 3392083 1 8120 720 0.0 15-02:34:39 haveged /usr/sbin/haveged --Foreground --verbose=1 +Ss 0 3392090 1 5168 132 0.0 15-02:34:39 blkmapd /usr/sbin/blkmapd +SNsl 111 3392094 1 155648 440 0.0 15-02:34:39 rtkit-daemon /usr/libexec/rtkit-daemon +Ssl 0 3392097 1 290168 1352 0.0 15-02:34:39 packagekitd /usr/libexec/packagekitd +Ss 128 3392100 1 7960 448 0.0 15-02:34:39 rpcbind /sbin/rpcbind -f -w +Ss 0 3392114 1 13432 616 0.0 15-02:34:39 systemd-machine /lib/systemd/systemd-machined +Ss 0 3392118 1 13316 848 0.0 15-02:34:39 sshd sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups +Ssl 0 3392124 1 244072 2456 0.0 15-02:34:39 upowerd /usr/libexec/upowerd +Ssl 0 3392138 1 1634748 10684 0.0 15-02:34:39 containerd /usr/bin/containerd +Ssl 0 3392139 1 222768 1784 0.0 15-02:34:39 rsyslogd /usr/sbin/rsyslogd -n -iNONE +Ss 13 3392140 1 3344 152 0.0 15-02:34:39 polipo /usr/bin/polipo -c /etc/polipo/config pidFile=/var/run/polipo/polipo.pid daemonise=true +Ssl 119 3392156 1 76472 1688 0.0 15-02:34:39 ntpd /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 119:126 +Ss 120 3392168 1 4656 276 0.0 15-02:34:39 rpc.statd /sbin/rpc.statd --no-notify +Ss 0 3392171 1 5072 432 0.0 15-02:34:39 rpc.mountd /usr/sbin/rpc.mountd --manage-gids +Ss 0 3392176 1 5008 288 0.0 15-02:34:39 rpc.idmapd /usr/sbin/rpc.idmapd +Ss 105 3392184 1 15544 6816 3.5 15-02:34:39 avahi-daemon avahi-daemon: running [tsui.local] +Ss 0 3392186 1 25288 3860 0.0 15-02:34:39 systemd-udevd /lib/systemd/systemd-udevd +S 105 3392190 3392184 8788 52 0.0 15-02:34:39 avahi-daemon avahi-daemon: chroot helper +Ssl 0 3392197 1 396120 4188 0.0 15-02:34:39 udisksd /usr/libexec/udisks2/udisksd +Ssl 0 3392214 1 237504 6632 0.0 15-02:34:39 polkitd /usr/libexec/polkitd --no-debug +Ss 0 3392284 1 9684 560 0.0 15-02:34:38 xinetd /usr/sbin/xinetd -pidfile /run/xinetd.pid -stayalive -inetd_compat -inetd_ipv6 +Ssl 0 3392285 1 314840 1352 0.0 15-02:34:38 ModemManager /usr/sbin/ModemManager +Ss 0 3392317 1 2352 140 0.0 15-02:34:38 acpid /usr/sbin/acpid +S 0 3392400 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392401 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392402 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392403 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392404 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392405 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392407 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +S 0 3392410 2 0 0 0.0 15-02:34:38 nfsd [nfsd] +Ss 0 3392551 1 40092 1304 0.0 15-02:34:37 master /usr/lib/postfix/sbin/master -w +S 117 3392553 3392551 40156 568 0.0 15-02:34:37 qmgr qmgr -l -t unix -u +Ss 0 3392650 1 63652 4 0.0 15-02:34:36 squid /usr/sbin/squid --foreground -sYC +Ssl 116 3392652 1 1675196 93848 0.0 15-02:34:36 mariadbd /usr/sbin/mariadbd +S 13 3392655 3392650 81776 21232 0.0 15-02:34:36 squid (squid-1) --kid squid-1 --foreground -sYC +S 13 3392657 3392655 5572 68 0.0 15-02:34:36 log_file_daemon (logfile-daemon) /var/log/squid/access.log +S Date: Mon, 15 Nov 2021 14:29:51 +0100 Subject: check_icmp: Fix pkt perfdata in check_host mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add missing "warn" threshold field in "pkt" perfdata output. Perfdata should be interpreted as; 'label'=value[UOM];[warn];[crit];[min];[max] With one field missing, the hardcoded min value '0' ended up in the "crit" field, making applications interpreting the perfdata thining that critical threshold is always exceeded. Signed-off-by: Aksel Sjögren diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 31eb4c6..519b93c 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -921,7 +921,7 @@ wait_for_reply(int sock, u_int t) /* if we're in hostcheck mode, exit with limited printouts */ if(mode == MODE_HOSTCHECK) { printf("OK - %s responds to ICMP. Packet %u, rta %0.3fms|" - "pkt=%u;;0;%u rta=%0.3f;%0.3f;%0.3f;;\n", + "pkt=%u;;;0;%u rta=%0.3f;%0.3f;%0.3f;;\n", host->name, icmp_recv, (float)tdiff / 1000, icmp_recv, packets, (float)tdiff / 1000, (float)warn.rta / 1000, (float)crit.rta / 1000); -- cgit v0.10-9-g596f From 024d268386353133af1a9ff5c0b5879397c19b1c Mon Sep 17 00:00:00 2001 From: Sven Nierlein Date: Wed, 17 Nov 2021 11:58:41 +0100 Subject: check_snmp: fix performance thresholds when using multiple oids when using check_snmp with multiple oids it simply printed the unparsed content from -w/-c into the thresholds for each oid. So each oid contained the hole -w from all oids. ./check_snmp ... -o iso.3.6.1.2.1.25.1.3.0,iso.3.6.1.2.1.25.1.5.0 -w '1,2' -c '3,4' before: SNMP ... | HOST-RESOURCES-MIB::hrSystemInitialLoadDevice.0=393216;1,2;3,4 HOST-RESOURCES-MIB::hrSystemNumUsers.0=24;1,2;3,4 after: SNMP ... | HOST-RESOURCES-MIB::hrSystemInitialLoadDevice.0=393216;1;3 HOST-RESOURCES-MIB::hrSystemNumUsers.0=24;2;4 This also applies to fixed thresholds since check_snmp translates negative infinities from: '~:-1' to '@-1:~' diff --git a/lib/utils_base.c b/lib/utils_base.c index fd7058d..08fa215 100644 --- a/lib/utils_base.c +++ b/lib/utils_base.c @@ -128,6 +128,7 @@ range temp_range->end = 0; temp_range->end_infinity = TRUE; temp_range->alert_on = OUTSIDE; + temp_range->text = strdup(str); if (str[0] == '@') { temp_range->alert_on = INSIDE; @@ -706,4 +707,3 @@ void np_state_write_string(time_t data_time, char *data_string) { np_free(temp_file); } - diff --git a/lib/utils_base.h b/lib/utils_base.h index d7e7dff..9482f23 100644 --- a/lib/utils_base.h +++ b/lib/utils_base.h @@ -23,6 +23,7 @@ typedef struct range_struct { double end; int end_infinity; int alert_on; /* OUTSIDE (default) or INSIDE */ + char* text; /* original unparsed text input */ } range; typedef struct thresholds_struct { diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index afc568b..58d46b1 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -468,6 +468,9 @@ main (int argc, char **argv) /* Process this block for numeric comparisons */ /* Make some special values,like Timeticks numeric only if a threshold is defined */ if (thlds[i]->warning || thlds[i]->critical || calculate_rate) { + if (verbose > 2) { + print_thresholds(" thresholds", thlds[i]); + } ptr = strpbrk (show, "-0123456789"); if (ptr == NULL) die (STATE_UNKNOWN,_("No valid data returned (%s)\n"), show); @@ -581,14 +584,16 @@ main (int argc, char **argv) if (warning_thresholds) { strncat(perfstr, ";", sizeof(perfstr)-strlen(perfstr)-1); - strncat(perfstr, warning_thresholds, sizeof(perfstr)-strlen(perfstr)-1); + if(thlds[i]->warning && thlds[i]->warning->text) + strncat(perfstr, thlds[i]->warning->text, sizeof(perfstr)-strlen(perfstr)-1); } if (critical_thresholds) { if (!warning_thresholds) strncat(perfstr, ";", sizeof(perfstr)-strlen(perfstr)-1); strncat(perfstr, ";", sizeof(perfstr)-strlen(perfstr)-1); - strncat(perfstr, critical_thresholds, sizeof(perfstr)-strlen(perfstr)-1); + if(thlds[i]->critical && thlds[i]->critical->text) + strncat(perfstr, thlds[i]->critical->text, sizeof(perfstr)-strlen(perfstr)-1); } strncat(perfstr, " ", sizeof(perfstr)-strlen(perfstr)-1); diff --git a/plugins/tests/check_snmp.t b/plugins/tests/check_snmp.t index 85d6bf5..0a77fa8 100755 --- a/plugins/tests/check_snmp.t +++ b/plugins/tests/check_snmp.t @@ -9,7 +9,7 @@ use NPTest; use FindBin qw($Bin); use POSIX qw/strftime/; -my $tests = 67; +my $tests = 73; # Check that all dependent modules are available eval { require NetSNMP::OID; @@ -251,9 +251,20 @@ is($res->output, 'SNMP CRITICAL - *-4* | iso.3.6.1.4.1.8072.3.2.67.17=-4;-2:;-3: $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.18 -c '~:-6.5'" ); is($res->return_code, 0, "Negative float OK" ); -is($res->output, 'SNMP OK - -6.6 | iso.3.6.1.4.1.8072.3.2.67.18=-6.6;;~:-6.5 ', "Negative float OK output" ); +is($res->output, 'SNMP OK - -6.6 | iso.3.6.1.4.1.8072.3.2.67.18=-6.6;;@-6.5:~ ', "Negative float OK output" ); $res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.18 -w '~:-6.65' -c '~:-6.55'" ); is($res->return_code, 1, "Negative float WARNING" ); -is($res->output, 'SNMP WARNING - *-6.6* | iso.3.6.1.4.1.8072.3.2.67.18=-6.6;~:-6.65;~:-6.55 ', "Negative float WARNING output" ); +is($res->output, 'SNMP WARNING - *-6.6* | iso.3.6.1.4.1.8072.3.2.67.18=-6.6;@-6.65:~;@-6.55:~ ', "Negative float WARNING output" ); +$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10,.1.3.6.1.4.1.8072.3.2.67.17 -w '1:100000,-10:20' -c '2:200000,-20:30'" ); +is($res->return_code, 0, "Multiple OIDs with thresholds" ); +like($res->output, '/SNMP OK - \d+ -4 | iso.3.6.1.4.1.8072.3.2.67.10=\d+c;1:100000;2:200000 iso.3.6.1.4.1.8072.3.2.67.17=-4;-10:20;-20:30/', "Multiple OIDs with thresholds output" ); + +$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10,.1.3.6.1.4.1.8072.3.2.67.17 -w '1:100000,-1:2' -c '2:200000,-20:30'" ); +is($res->return_code, 1, "Multiple OIDs with thresholds" ); +like($res->output, '/SNMP WARNING - \d+ \*-4\* | iso.3.6.1.4.1.8072.3.2.67.10=\d+c;1:100000;2:200000 iso.3.6.1.4.1.8072.3.2.67.17=-4;-10:20;-20:30/', "Multiple OIDs with thresholds output" ); + +$res = NPTest->testCmd( "./check_snmp -H 127.0.0.1 -C public -p $port_snmp -o .1.3.6.1.4.1.8072.3.2.67.10,.1.3.6.1.4.1.8072.3.2.67.17 -w 1,2 -c 1" ); +is($res->return_code, 2, "Multiple OIDs with some thresholds" ); +like($res->output, '/SNMP CRITICAL - \*\d+\* \*-4\* | iso.3.6.1.4.1.8072.3.2.67.10=\d+c;1;2 iso.3.6.1.4.1.8072.3.2.67.17=-4;;/', "Multiple OIDs with thresholds output" ); -- cgit v0.10-9-g596f From 27d96dcf23c44c74d0a2be7ea94f47798e37030a Mon Sep 17 00:00:00 2001 From: rincewind Date: Fri, 9 Jul 2021 16:07:23 +0200 Subject: Do not show RTA if no connection was possible diff --git a/plugins/check_ping.c b/plugins/check_ping.c index 423ecbe..7d58b10 100644 --- a/plugins/check_ping.c +++ b/plugins/check_ping.c @@ -37,6 +37,8 @@ const char *email = "devel@monitoring-plugins.org"; #include "popen.h" #include "utils.h" +#include + #define WARN_DUPLICATES "DUPLICATES FOUND! " #define UNKNOWN_TRIP_TIME -1.0 /* -1 seconds */ @@ -163,10 +165,14 @@ main (int argc, char **argv) printf (""); /* Print performance data */ - printf("|%s", fperfdata ("rta", (double) rta, "ms", - wrta>0?TRUE:FALSE, wrta, - crta>0?TRUE:FALSE, crta, - TRUE, 0, FALSE, 0)); + if (pl != 100) { + printf("|%s", fperfdata ("rta", (double) rta, "ms", + wrta>0?TRUE:FALSE, wrta, + crta>0?TRUE:FALSE, crta, + TRUE, 0, FALSE, 0)); + } else { + printf("|"); + } printf(" %s\n", perfdata ("pl", (long) pl, "%", wpl>0?TRUE:FALSE, wpl, cpl>0?TRUE:FALSE, cpl, -- cgit v0.10-9-g596f From 0214ec1918abf589f15b70948ddba641a9729ce3 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 17 Nov 2021 14:09:11 +0100 Subject: Show RTA as unknown if it can not be determined diff --git a/plugins/check_ping.c b/plugins/check_ping.c index 7d58b10..6aa43ed 100644 --- a/plugins/check_ping.c +++ b/plugins/check_ping.c @@ -171,7 +171,7 @@ main (int argc, char **argv) crta>0?TRUE:FALSE, crta, TRUE, 0, FALSE, 0)); } else { - printf("|"); + printf("| rta=U;;;;;"); } printf(" %s\n", perfdata ("pl", (long) pl, "%", wpl>0?TRUE:FALSE, wpl, -- cgit v0.10-9-g596f From 1c53c4f541db3afdc3a2975121b69064d53f7ef3 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 17 Nov 2021 15:45:17 +0100 Subject: homogenize perfdata function and fix small bug with missing semicolon diff --git a/plugins/utils.c b/plugins/utils.c index ebdae2e..17dd581 100644 --- a/plugins/utils.c +++ b/plugins/utils.c @@ -589,10 +589,12 @@ char *perfdata (const char *label, xasprintf (&data, "%s;", data); if (minp) - xasprintf (&data, "%s%ld", data, minv); + xasprintf (&data, "%s%ld;", data, minv); + else + xasprintf (&data, "%s;", data); if (maxp) - xasprintf (&data, "%s;%ld", data, maxv); + xasprintf (&data, "%s%ld", data, maxv); return data; } -- cgit v0.10-9-g596f From e030c2d17c10446bda840d66f6753b9bf573d715 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 17 Nov 2021 15:45:49 +0100 Subject: Add thresholds even if value is missing diff --git a/plugins/check_ping.c b/plugins/check_ping.c index 6aa43ed..ba7af37 100644 --- a/plugins/check_ping.c +++ b/plugins/check_ping.c @@ -171,7 +171,7 @@ main (int argc, char **argv) crta>0?TRUE:FALSE, crta, TRUE, 0, FALSE, 0)); } else { - printf("| rta=U;;;;;"); + printf("| rta=U;%f;%f;;", wrta, crta); } printf(" %s\n", perfdata ("pl", (long) pl, "%", wpl>0?TRUE:FALSE, wpl, -- cgit v0.10-9-g596f From ee3449dee7578f1b0508b9ceb0c14a0d72a67646 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Fri, 19 Nov 2021 00:34:44 +0100 Subject: Small fix to threshold validation and style (indentation) fixes diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 685c2cc..7f71bf7 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -552,9 +552,12 @@ validate_arguments (void) if (warn.value == 0 && crit.value == 0) { return ERROR; } - else if (warn.value < crit.value) { - usage4 - (_("Warning should be more than critical")); + else if ((warn.is_percentage == crit.is_percentage) && (warn.value < crit.value)) { + /* This is NOT triggered if warn and crit are different units, e.g warn is percentage + * and crit is absolut. We cannot determine the condition at this point since we + * dont know the value of total swap yet + */ + usage4(_("Warning should be more than critical")); } return OK; } @@ -570,7 +573,7 @@ print_help (void) printf ("%s\n", _("Check swap space on local machine.")); - printf ("\n\n"); + printf ("\n\n"); print_usage (); @@ -578,23 +581,23 @@ print_help (void) printf (UT_EXTRA_OPTS); printf (" %s\n", "-w, --warning=INTEGER"); - printf (" %s\n", _("Exit with WARNING status if less than INTEGER bytes of swap space are free")); - printf (" %s\n", "-w, --warning=PERCENT%%"); - printf (" %s\n", _("Exit with WARNING status if less than PERCENT of swap space is free")); - printf (" %s\n", "-c, --critical=INTEGER"); - printf (" %s\n", _("Exit with CRITICAL status if less than INTEGER bytes of swap space are free")); - printf (" %s\n", "-c, --critical=PERCENT%%"); - printf (" %s\n", _("Exit with CRITICAL status if less than PERCENT of swap space is free")); - printf (" %s\n", "-a, --allswaps"); - printf (" %s\n", _("Conduct comparisons for all swap partitions, one by one")); - printf (" %s\n", "-n, --no-swap="); - printf (" %s %s\n", _("Resulting state when there is no swap regardless of thresholds. Default:"), state_text(no_swap_state)); + printf (" %s\n", _("Exit with WARNING status if less than INTEGER bytes of swap space are free")); + printf (" %s\n", "-w, --warning=PERCENT%"); + printf (" %s\n", _("Exit with WARNING status if less than PERCENT of swap space is free")); + printf (" %s\n", "-c, --critical=INTEGER"); + printf (" %s\n", _("Exit with CRITICAL status if less than INTEGER bytes of swap space are free")); + printf (" %s\n", "-c, --critical=PERCENT%"); + printf (" %s\n", _("Exit with CRITICAL status if less than PERCENT of swap space is free")); + printf (" %s\n", "-a, --allswaps"); + printf (" %s\n", _("Conduct comparisons for all swap partitions, one by one")); + printf (" %s\n", "-n, --no-swap="); + printf (" %s %s\n", _("Resulting state when there is no swap regardless of thresholds. Default:"), state_text(no_swap_state)); printf (UT_VERBOSE); printf ("\n"); - printf ("%s\n", _("Notes:")); - printf (" %s\n", _("Both INTEGER and PERCENT thresholds can be specified, they are all checked.")); - printf (" %s\n", _("On AIX, if -a is specified, uses lsps -a, otherwise uses lsps -s.")); + printf ("%s\n", _("Notes:")); + printf (" %s\n", _("Both INTEGER and PERCENT thresholds can be specified, they are all checked.")); + printf (" %s\n", _("On AIX, if -a is specified, uses lsps -a, otherwise uses lsps -s.")); printf (UT_SUPPORT); } @@ -604,6 +607,6 @@ void print_usage (void) { printf ("%s\n", _("Usage:")); - printf (" %s [-av] -w %% -c %%\n",progname); - printf (" -w -c [-n ]\n"); + printf (" %s [-av] -w %% -c %%\n",progname); + printf (" -w -c [-n ]\n"); } -- cgit v0.10-9-g596f From a1fe4df6a3a146b50c4fd700acdf8baf848874aa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Mon, 19 Apr 2021 11:51:30 +0200 Subject: Fixed option description authpassword -> authpasswd + whitespaces diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index 58d46b1..88422b1 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -1,31 +1,31 @@ /***************************************************************************** -* +* * Monitoring check_snmp plugin -* +* * License: GPL * Copyright (c) 1999-2007 Monitoring Plugins Development Team -* +* * Description: -* +* * This file contains the check_snmp plugin -* +* * Check status of remote machines and obtain system information via SNMP -* -* +* +* * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. -* +* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. -* +* * You should have received a copy of the GNU General Public License * along with this program. If not, see . -* -* +* +* *****************************************************************************/ const char *progname = "check_snmp"; @@ -315,7 +315,7 @@ main (int argc, char **argv) for (i = 0; i < numcontext; i++) { command_line[10 + i] = contextargs[i]; } - + for (i = 0; i < numauthpriv; i++) { command_line[10 + numcontext + i] = authpriv[i]; } @@ -329,7 +329,7 @@ main (int argc, char **argv) for (i = 0; i < numoids; i++) { command_line[10 + numcontext + numauthpriv + 1 + i] = oids[i]; - xasprintf(&cl_hidden_auth, "%s %s", cl_hidden_auth, oids[i]); + xasprintf(&cl_hidden_auth, "%s %s", cl_hidden_auth, oids[i]); } command_line[10 + numcontext + numauthpriv + 1 + numoids] = NULL; @@ -398,14 +398,14 @@ main (int argc, char **argv) /* We strip out the datatype indicator for PHBs */ if (strstr (response, "Gauge: ")) { show = strstr (response, "Gauge: ") + 7; - } + } else if (strstr (response, "Gauge32: ")) { show = strstr (response, "Gauge32: ") + 9; - } + } else if (strstr (response, "Counter32: ")) { show = strstr (response, "Counter32: ") + 11; is_counter=1; - if(!calculate_rate) + if(!calculate_rate) strcpy(type, "c"); } else if (strstr (response, "Counter64: ")) { @@ -607,7 +607,7 @@ main (int argc, char **argv) state_string=malloc(string_length); if(state_string==NULL) die(STATE_UNKNOWN, _("Cannot malloc")); - + current_length=0; for(i=0; i 2) printf("State string=%s\n",state_string); - + /* This is not strictly the same as time now, but any subtle variations will cancel out */ np_state_write_string(current_time, state_string ); if(previous_state==NULL) { @@ -1006,7 +1006,7 @@ validate_arguments () contextargs[0] = strdup ("-n"); contextargs[1] = strdup (context); } - + if (seclevel == NULL) xasprintf(&seclevel, "noAuthNoPriv"); @@ -1166,7 +1166,7 @@ print_help (void) printf ("(%s \"%s\")\n", _("default is") ,DEFAULT_COMMUNITY); printf (" %s\n", "-U, --secname=USERNAME"); printf (" %s\n", _("SNMPv3 username")); - printf (" %s\n", "-A, --authpassword=PASSWORD"); + printf (" %s\n", "-A, --authpasswd=PASSWORD"); printf (" %s\n", _("SNMPv3 authentication password")); printf (" %s\n", "-X, --privpasswd=PASSWORD"); printf (" %s\n", _("SNMPv3 privacy password")); -- cgit v0.10-9-g596f From cf9dccbec22e15a475cd6d5b160f503a04348a0d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Mon, 19 Apr 2021 12:22:16 +0200 Subject: Revert "Fixed option description authpassword -> authpasswd + whitespaces" This reverts commit b27e639725f680411aaa78dd9aa59cfff84ad0c5. diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index 88422b1..58d46b1 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -1,31 +1,31 @@ /***************************************************************************** -* +* * Monitoring check_snmp plugin -* +* * License: GPL * Copyright (c) 1999-2007 Monitoring Plugins Development Team -* +* * Description: -* +* * This file contains the check_snmp plugin -* +* * Check status of remote machines and obtain system information via SNMP -* -* +* +* * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. -* +* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. -* +* * You should have received a copy of the GNU General Public License * along with this program. If not, see . -* -* +* +* *****************************************************************************/ const char *progname = "check_snmp"; @@ -315,7 +315,7 @@ main (int argc, char **argv) for (i = 0; i < numcontext; i++) { command_line[10 + i] = contextargs[i]; } - + for (i = 0; i < numauthpriv; i++) { command_line[10 + numcontext + i] = authpriv[i]; } @@ -329,7 +329,7 @@ main (int argc, char **argv) for (i = 0; i < numoids; i++) { command_line[10 + numcontext + numauthpriv + 1 + i] = oids[i]; - xasprintf(&cl_hidden_auth, "%s %s", cl_hidden_auth, oids[i]); + xasprintf(&cl_hidden_auth, "%s %s", cl_hidden_auth, oids[i]); } command_line[10 + numcontext + numauthpriv + 1 + numoids] = NULL; @@ -398,14 +398,14 @@ main (int argc, char **argv) /* We strip out the datatype indicator for PHBs */ if (strstr (response, "Gauge: ")) { show = strstr (response, "Gauge: ") + 7; - } + } else if (strstr (response, "Gauge32: ")) { show = strstr (response, "Gauge32: ") + 9; - } + } else if (strstr (response, "Counter32: ")) { show = strstr (response, "Counter32: ") + 11; is_counter=1; - if(!calculate_rate) + if(!calculate_rate) strcpy(type, "c"); } else if (strstr (response, "Counter64: ")) { @@ -607,7 +607,7 @@ main (int argc, char **argv) state_string=malloc(string_length); if(state_string==NULL) die(STATE_UNKNOWN, _("Cannot malloc")); - + current_length=0; for(i=0; i 2) printf("State string=%s\n",state_string); - + /* This is not strictly the same as time now, but any subtle variations will cancel out */ np_state_write_string(current_time, state_string ); if(previous_state==NULL) { @@ -1006,7 +1006,7 @@ validate_arguments () contextargs[0] = strdup ("-n"); contextargs[1] = strdup (context); } - + if (seclevel == NULL) xasprintf(&seclevel, "noAuthNoPriv"); @@ -1166,7 +1166,7 @@ print_help (void) printf ("(%s \"%s\")\n", _("default is") ,DEFAULT_COMMUNITY); printf (" %s\n", "-U, --secname=USERNAME"); printf (" %s\n", _("SNMPv3 username")); - printf (" %s\n", "-A, --authpasswd=PASSWORD"); + printf (" %s\n", "-A, --authpassword=PASSWORD"); printf (" %s\n", _("SNMPv3 authentication password")); printf (" %s\n", "-X, --privpasswd=PASSWORD"); printf (" %s\n", _("SNMPv3 privacy password")); -- cgit v0.10-9-g596f From c46447af659e96d78c2f02e1295e887a4d12cd36 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lorenz=20K=C3=A4stle?= Date: Mon, 19 Apr 2021 12:23:42 +0200 Subject: Fix option description authpassword -> authpasswd diff --git a/plugins/check_snmp.c b/plugins/check_snmp.c index 58d46b1..abe54cf 100644 --- a/plugins/check_snmp.c +++ b/plugins/check_snmp.c @@ -1166,7 +1166,7 @@ print_help (void) printf ("(%s \"%s\")\n", _("default is") ,DEFAULT_COMMUNITY); printf (" %s\n", "-U, --secname=USERNAME"); printf (" %s\n", _("SNMPv3 username")); - printf (" %s\n", "-A, --authpassword=PASSWORD"); + printf (" %s\n", "-A, --authpasswd=PASSWORD"); printf (" %s\n", _("SNMPv3 authentication password")); printf (" %s\n", "-X, --privpasswd=PASSWORD"); printf (" %s\n", _("SNMPv3 privacy password")); -- cgit v0.10-9-g596f From f961b7f7bd5d10328bf152cbc015271180165f0f Mon Sep 17 00:00:00 2001 From: Linda Guo Date: Fri, 19 Nov 2021 13:25:09 +1100 Subject: Allows check_ldap to get password from env variable It's not secure to provide LDAP password through command line option because other users on the same host can see the password in 'ps' command output. This change allows check_ldap to get password from environment variable. diff --git a/plugins/check_ldap.c b/plugins/check_ldap.c index bc7bd44..845a4f5 100644 --- a/plugins/check_ldap.c +++ b/plugins/check_ldap.c @@ -432,6 +432,9 @@ validate_arguments () set_thresholds(&entries_thresholds, warn_entries, crit_entries); } + if (ld_passwd==NULL) + ld_passwd = getenv("LDAP_PASSWORD"); + return OK; } @@ -465,7 +468,7 @@ print_help (void) printf (" %s\n", "-D [--bind]"); printf (" %s\n", _("ldap bind DN (if required)")); printf (" %s\n", "-P [--pass]"); - printf (" %s\n", _("ldap password (if required)")); + printf (" %s\n", _("ldap password (if required, or set the password through environment variable 'LDAP_PASSWORD')")); printf (" %s\n", "-T [--starttls]"); printf (" %s\n", _("use starttls mechanism introduced in protocol version 3")); printf (" %s\n", "-S [--ssl]"); -- cgit v0.10-9-g596f From 09bfb1b482f428b1c11f68b5be7d134ba5e3b457 Mon Sep 17 00:00:00 2001 From: PhiBo Date: Wed, 24 Nov 2021 11:23:47 +0100 Subject: Fix possible overflow in check_ups (Fixes: #1030) diff --git a/plugins/check_ups.c b/plugins/check_ups.c index e9e56a5..0de37a2 100644 --- a/plugins/check_ups.c +++ b/plugins/check_ups.c @@ -402,7 +402,10 @@ get_ups_variable (const char *varname, char *buf, size_t buflen) /* create the command string to send to the UPS daemon */ /* Add LOGOUT to avoid read failure logs */ - sprintf (send_buffer, "GET VAR %s %s\nLOGOUT\n", ups_name, varname); + if (snprintf (send_buffer, sizeof(send_buffer), "GET VAR %s %s\nLOGOUT\n", ups_name, varname) >= sizeof(send_buffer)) { + printf("%s\n", _("UPS name to long for buffer")); + return ERROR; + } /* send the command to the daemon and get a response back */ if (process_tcp_request -- cgit v0.10-9-g596f From e2f24a5af3fe407035c8c57f539148f2d694973b Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 24 Nov 2021 14:25:42 +0100 Subject: Fix CodeQL checks diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index 519b93c..bcf6c5f 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -502,7 +502,7 @@ main(int argc, char **argv) icmp_data_size = size; icmp_pkt_size = size + ICMP_MINLEN; } else - usage_va("ICMP data length must be between: %d and %d", + usage_va("ICMP data length must be between: %ul and %ul", sizeof(struct icmp) + sizeof(struct icmp_ping_data), MAX_PING_DATA - 1); break; @@ -1293,7 +1293,7 @@ add_target_ip(char *arg, struct sockaddr_storage *in) if(!host) { char straddr[INET6_ADDRSTRLEN]; parse_address((struct sockaddr_storage*)&in, straddr, sizeof(straddr)); - crash("add_target_ip(%s, %s): malloc(%d) failed", + crash("add_target_ip(%s, %s): malloc(%ul) failed", arg, straddr, sizeof(struct rta_host)); } memset(host, 0, sizeof(struct rta_host)); diff --git a/plugins/check_disk.c b/plugins/check_disk.c index c526d05..f032378 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -1040,9 +1040,15 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { get_fs_usage (p_list->best_match->me_mountdir, p_list->best_match->me_devname, &tmpfsp); get_path_stats(p_list, &tmpfsp); if (verbose >= 3) - printf("Group %s: adding %llu blocks sized %llu, (%s) used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", - p_list->group, tmpfsp.fsu_bavail, tmpfsp.fsu_blocksize, p_list->best_match->me_mountdir, p_list->dused_units, p_list->dfree_units, - p_list->dtotal_units, mult); + printf("Group %s: adding %llu blocks sized %llu, (%s) used_units=%g free_units=%g total_units=%g mult=%llu\n", + p_list->group, + tmpfsp.fsu_blocks, + tmpfsp.fsu_blocksize, + p_list->best_match->me_mountdir, + p_list->dused_units, + p_list->dfree_units, + p_list->dtotal_units, + mult); /* prevent counting the first FS of a group twice since its parameter_list entry * is used to carry the information of all file systems of the entire group */ @@ -1065,12 +1071,10 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { if (verbose >= 3) printf("Group %s now has: used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", p->group, - tmpfsp.fsu_bavail, - tmpfsp.fsu_blocksize, - p->best_match->me_mountdir, p->dused_units, p->dfree_units, p->dtotal_units, + tmpfsp.fsu_blocksize, mult); } /* modify devname and mountdir for output */ diff --git a/plugins/check_hpjd.c b/plugins/check_hpjd.c index 6546556..d3d72d7 100644 --- a/plugins/check_hpjd.c +++ b/plugins/check_hpjd.c @@ -121,7 +121,7 @@ main (int argc, char **argv) HPJD_GD_DOOR_OPEN, HPJD_GD_PAPER_OUTPUT, HPJD_GD_STATUS_DISPLAY); /* get the command to run */ - sprintf (command_line, "%s -OQa -m : -v 1 -c %s %s:%hd %s", PATH_TO_SNMPGET, community, + sprintf (command_line, "%s -OQa -m : -v 1 -c %s %s:%s %s", PATH_TO_SNMPGET, community, address, port, query_string); /* run the command */ diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 7f71bf7..00bdcdd 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -142,7 +142,7 @@ main (int argc, char **argv) percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); result = max_state (result, check_swap (dskfree_mb, dsktotal_mb)); if (verbose) - xasprintf (&status, "%s [%.0f (%d%%)]", status, dskfree_mb, 100 - percent); + xasprintf (&status, "%s [%ul (%d%%)]", status, dskfree_mb, 100 - percent); } } /* -- cgit v0.10-9-g596f From 40d4e8a057a77e357c26d701c5fd304b51787b93 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 24 Nov 2021 15:38:18 +0100 Subject: check_hpjd: Fixing port option diff --git a/plugins/check_hpjd.c b/plugins/check_hpjd.c index d3d72d7..c4b4417 100644 --- a/plugins/check_hpjd.c +++ b/plugins/check_hpjd.c @@ -66,7 +66,7 @@ void print_usage (void); char *community = NULL; char *address = NULL; -char *port = NULL; +unsigned int port = 0; int check_paper_out = 1; int @@ -121,8 +121,12 @@ main (int argc, char **argv) HPJD_GD_DOOR_OPEN, HPJD_GD_PAPER_OUTPUT, HPJD_GD_STATUS_DISPLAY); /* get the command to run */ - sprintf (command_line, "%s -OQa -m : -v 1 -c %s %s:%s %s", PATH_TO_SNMPGET, community, - address, port, query_string); + sprintf (command_line, "%s -OQa -m : -v 1 -c %s %s:%u %s", + PATH_TO_SNMPGET, + community, + address, + port, + query_string); /* run the command */ child_process = spopen (command_line); @@ -380,11 +384,8 @@ process_arguments (int argc, char **argv) community = strdup (DEFAULT_COMMUNITY); } - if (port == NULL) { - if (argv[c] != NULL ) - port = argv[c]; - else - port = atoi (DEFAULT_PORT); + if (port == 0) { + port = atoi(DEFAULT_PORT); } return validate_arguments (); -- cgit v0.10-9-g596f From d28bab4dbdf5b5be37b70164dd4a6d55e0ca9380 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Wed, 24 Nov 2021 19:02:17 +0100 Subject: More wrong printf formatting diff --git a/plugins-root/check_icmp.c b/plugins-root/check_icmp.c index bcf6c5f..01ae174 100644 --- a/plugins-root/check_icmp.c +++ b/plugins-root/check_icmp.c @@ -502,7 +502,7 @@ main(int argc, char **argv) icmp_data_size = size; icmp_pkt_size = size + ICMP_MINLEN; } else - usage_va("ICMP data length must be between: %ul and %ul", + usage_va("ICMP data length must be between: %lu and %lu", sizeof(struct icmp) + sizeof(struct icmp_ping_data), MAX_PING_DATA - 1); break; @@ -1293,7 +1293,7 @@ add_target_ip(char *arg, struct sockaddr_storage *in) if(!host) { char straddr[INET6_ADDRSTRLEN]; parse_address((struct sockaddr_storage*)&in, straddr, sizeof(straddr)); - crash("add_target_ip(%s, %s): malloc(%ul) failed", + crash("add_target_ip(%s, %s): malloc(%lu) failed", arg, straddr, sizeof(struct rta_host)); } memset(host, 0, sizeof(struct rta_host)); diff --git a/plugins/check_disk.c b/plugins/check_disk.c index f032378..54befca 100644 --- a/plugins/check_disk.c +++ b/plugins/check_disk.c @@ -1040,7 +1040,7 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { get_fs_usage (p_list->best_match->me_mountdir, p_list->best_match->me_devname, &tmpfsp); get_path_stats(p_list, &tmpfsp); if (verbose >= 3) - printf("Group %s: adding %llu blocks sized %llu, (%s) used_units=%g free_units=%g total_units=%g mult=%llu\n", + printf("Group %s: adding %llu blocks sized %llu, (%s) used_units=%lu free_units=%llu total_units=%llu mult=%llu\n", p_list->group, tmpfsp.fsu_blocks, tmpfsp.fsu_blocksize, @@ -1069,7 +1069,7 @@ get_stats (struct parameter_list *p, struct fs_usage *fsp) { first = 0; } if (verbose >= 3) - printf("Group %s now has: used_units=%g free_units=%g total_units=%g fsu_blocksize=%llu mult=%llu\n", + printf("Group %s now has: used_units=%llu free_units=%llu total_units=%llu fsu_blocksize=%llu mult=%llu\n", p->group, p->dused_units, p->dfree_units, diff --git a/plugins/check_swap.c b/plugins/check_swap.c index 00bdcdd..7da26cf 100644 --- a/plugins/check_swap.c +++ b/plugins/check_swap.c @@ -142,7 +142,7 @@ main (int argc, char **argv) percent = 100 * (((double) dskused_mb) / ((double) dsktotal_mb)); result = max_state (result, check_swap (dskfree_mb, dsktotal_mb)); if (verbose) - xasprintf (&status, "%s [%ul (%d%%)]", status, dskfree_mb, 100 - percent); + xasprintf (&status, "%s [%lu (%d%%)]", status, dskfree_mb, 100 - percent); } } /* -- cgit v0.10-9-g596f From 5e2c3992204466d621e521695c4250f1d5480e77 Mon Sep 17 00:00:00 2001 From: RincewindsHat <12514511+RincewindsHat@users.noreply.github.com> Date: Mon, 29 Nov 2021 17:27:57 +0100 Subject: Make size parameter a little bit more intelligible diff --git a/plugins-scripts/check_file_age.pl b/plugins-scripts/check_file_age.pl index 01b854a..26281dd 100755 --- a/plugins-scripts/check_file_age.pl +++ b/plugins-scripts/check_file_age.pl @@ -147,7 +147,7 @@ sub print_help () { print "\n"; print " -i | --ignore-missing : return OK if the file does not exist\n"; print " File must be no more than this many seconds old (default: warn 240 secs, crit 600)\n"; - print " File must be at least this many bytes long (default: crit 0 bytes)\n\n"; + print " File must be at least this many bytes long (default: file size is ignored (0 bytes))\n\n"; print " Both and can specify a range using the standard plugin syntax\n"; print " If any of the warning and critical arguments are in range syntax (not just bare numbers)\n"; print " then all warning and critical arguments will be interpreted as ranges.\n"; -- cgit v0.10-9-g596f