[Nagiosplug-help] check_hpjd returns no response

[Andreas Ericsson]

Jonathan Weinraub wrote:
> I use version 1.4.4/1.34
> 
> I can ping it, but check_hpjd doesn't work.
> 
> It is a Hewlett Packard LaserJet 1320
> 
> [root at intranet libexec]# ./check_hpjd -V
> check_hpjd (nagios-plugins 1.4.4) 1.34
> [root at intranet libexec]# ./check_hpjd -H 10.1.3.8
> Timeout: No Response from 10.1.3.8. : Timeout from host 10.1.3.8
> 
> [root at intranet libexec]# ./check_hpjd -H 10.1.3.8 -C public
> Timeout: No Response from 10.1.3.8. : Timeout from host 10.1.3.8
> 
> [root at intranet libexec]# ping 10.1.3.8
> PING 10.1.3.8 (10.1.3.8) 56(84) bytes of data.
> 64 bytes from 10.1.3.8: icmp_seq=0 ttl=64 time=1.03 ms
> 64 bytes from 10.1.3.8: icmp_seq=1 ttl=64 time=0.984 ms
> 64 bytes from 10.1.3.8: icmp_seq=2 ttl=64 time=0.932 ms
> 
> --- 10.1.3.8 ping statistics ---
> 3 packets transmitted, 3 received, 0% packet loss, time 2002ms
> rtt min/avg/max/mdev = 0.932/0.984/1.038/0.056 ms, pipe 2
> [root at intranet libexec]# host 10.1.3.8
> 8.3.1.10.in-addr.arpa domain name pointer complab.foo.local.
> 
> 
> I am at a loss...Any ideas are appreciated.
> 

Is the printer snmp-capable/enabled? What does snmpwalk tell you?

-- 
Andreas Ericsson                   andreas.ericsson at op5.se
OP5 AB                             www.op5.se
Tel: +46 8-230225                  Fax: +46 8-230231