Add Gnulib module "crypto/sha256" and remote "crypto/sha1"

15 files changed, 623 insertions, 518 deletions

diff --git a/gl/Makefile.am b/gl/Makefile.am
index deb665c..d0acf41 100644
--- a/gl/Makefile.am
+++ b/gl/Makefile.am
@@ -34,7 +34,7 @@
 #  --macro-prefix=gl \
 #  --no-vc-files \
 #  base64 \
-#  crypto/sha1 \
+#  crypto/sha256 \
 #  dirname \
 #  environ \
 #  floorf \
@@ -241,19 +241,19 @@ EXTRA_DIST += af_alg.h sys-limits.h
 
 ## end   gnulib module crypto/af_alg
 
-## begin gnulib module crypto/sha1
+## begin gnulib module crypto/sha256
 
-libgnu_a_SOURCES += sha1-stream.c
+libgnu_a_SOURCES += sha256-stream.c
 
-## end   gnulib module crypto/sha1
+## end   gnulib module crypto/sha256
 
-## begin gnulib module crypto/sha1-buffer
+## begin gnulib module crypto/sha256-buffer
 
-libgnu_a_SOURCES += sha1.c
+libgnu_a_SOURCES += sha256.c
 
-EXTRA_DIST += gl_openssl.h sha1.h
+EXTRA_DIST += gl_openssl.h sha256.h
 
-## end   gnulib module crypto/sha1-buffer
+## end   gnulib module crypto/sha256-buffer
 
 ## begin gnulib module dirname
 
diff --git a/gl/m4/gnulib-cache.m4 b/gl/m4/gnulib-cache.m4
index 9d0128a..06fed91 100644
--- a/gl/m4/gnulib-cache.m4
+++ b/gl/m4/gnulib-cache.m4
@@ -39,7 +39,7 @@
 #  --macro-prefix=gl \
 #  --no-vc-files \
 #  base64 \
-#  crypto/sha1 \
+#  crypto/sha256 \
 #  dirname \
 #  environ \
 #  floorf \
@@ -65,7 +65,7 @@
 gl_LOCAL_DIR([])
 gl_MODULES([
   base64
-  crypto/sha1
+  crypto/sha256
   dirname
   environ
   floorf
diff --git a/gl/m4/gnulib-common.m4 b/gl/m4/gnulib-common.m4
index 30911d1..8a5daa2 100644
--- a/gl/m4/gnulib-common.m4
+++ b/gl/m4/gnulib-common.m4
@@ -313,7 +313,8 @@ AC_DEFUN([gl_COMMON_BODY], [
 #else
 # define _GL_ATTRIBUTE_MAYBE_UNUSED _GL_ATTRIBUTE_UNUSED
 #endif
-/* Alternative spelling of this macro, for convenience.  */
+/* Alternative spelling of this macro, for convenience and for
+   compatibility with glibc/include/libc-symbols.h.  */
 #define _GL_UNUSED _GL_ATTRIBUTE_MAYBE_UNUSED
 /* Earlier spellings of this macro.  */
 #define _UNUSED_PARAMETER_ _GL_ATTRIBUTE_MAYBE_UNUSED
diff --git a/gl/m4/gnulib-comp.m4 b/gl/m4/gnulib-comp.m4
index a82c5de..93b7884 100644
--- a/gl/m4/gnulib-comp.m4
+++ b/gl/m4/gnulib-comp.m4
@@ -57,8 +57,8 @@ AC_DEFUN([gl_EARLY],
   # Code from module cloexec:
   # Code from module close:
   # Code from module crypto/af_alg:
-  # Code from module crypto/sha1:
-  # Code from module crypto/sha1-buffer:
+  # Code from module crypto/sha256:
+  # Code from module crypto/sha256-buffer:
   # Code from module dirname:
   # Code from module dirname-lgpl:
   # Code from module double-slash-root:
@@ -265,7 +265,7 @@ AC_DEFUN([gl_INIT],
   gl_UNISTD_MODULE_INDICATOR([close])
   gl_AF_ALG
   AC_REQUIRE([AC_C_RESTRICT])
-  gl_SHA1
+  gl_SHA256
   gl_MODULE_INDICATOR([dirname])
   gl_DOUBLE_SLASH_ROOT
   gl_FUNC_DUP2
@@ -1130,9 +1130,9 @@ AC_DEFUN([gl_FILE_LIST], [
   lib/setlocale-lock.c
   lib/setlocale_null.c
   lib/setlocale_null.h
-  lib/sha1-stream.c
-  lib/sha1.c
-  lib/sha1.h
+  lib/sha256-stream.c
+  lib/sha256.c
+  lib/sha256.h
   lib/size_max.h
   lib/snprintf.c
   lib/sockets.c
@@ -1316,7 +1316,7 @@ AC_DEFUN([gl_FILE_LIST], [
   m4/servent.m4
   m4/setenv.m4
   m4/setlocale_null.m4
-  m4/sha1.m4
+  m4/sha256.m4
   m4/size_max.m4
   m4/snprintf.m4
   m4/socketlib.m4
diff --git a/gl/m4/sha1.m4 b/gl/m4/sha256.m4
index 0d7abc7..b3d8f92 100644
--- a/gl/m4/sha1.m4
+++ b/gl/m4/sha256.m4
@@ -1,14 +1,14 @@
-# sha1.m4 serial 12
-dnl Copyright (C) 2002-2006, 2008-2022 Free Software Foundation, Inc.
+# sha256.m4 serial 8
+dnl Copyright (C) 2005, 2008-2022 Free Software Foundation, Inc.
 dnl This file is free software; the Free Software Foundation
 dnl gives unlimited permission to copy and/or distribute it,
 dnl with or without modifications, as long as this notice is preserved.
 
-AC_DEFUN([gl_SHA1],
+AC_DEFUN([gl_SHA256],
 [
-  dnl Prerequisites of lib/sha1.c.
+  dnl Prerequisites of lib/sha256.c.
   AC_REQUIRE([gl_BIGENDIAN])
 
-  dnl Determine HAVE_OPENSSL_SHA1 and LIB_CRYPTO
-  gl_CRYPTO_CHECK([SHA1])
+  dnl Determine HAVE_OPENSSL_SHA256 and LIB_CRYPTO
+  gl_CRYPTO_CHECK([SHA256])
 ])
diff --git a/gl/math.in.h b/gl/math.in.h
index a74a95d..270e71f 100644
--- a/gl/math.in.h
+++ b/gl/math.in.h
@@ -2591,7 +2591,7 @@ _GL_EXTERN_C int rpl_isnanl (long double x) _GL_ATTRIBUTE_CONST;
 #  if defined isnan || defined GNULIB_NAMESPACE
 _GL_MATH_CXX_REAL_FLOATING_DECL_1 (isnan)
 #   undef isnan
-#   if __GNUC__ >= 6 || (defined __clang__ && !((defined __APPLE__ && defined __MACH__ && __clang_major__ < 12) || (defined __FreeBSD__ && __clang_major__ < 7) || defined __OpenBSD__ || (defined _WIN32 && !defined __CYGWIN__)))
+#   if __GNUC__ >= 6 || (defined __clang__ && !((defined __APPLE__ && defined __MACH__ && __clang_major__ < 12) || (defined __FreeBSD__ && (__clang_major__ < 7 || __clang_major__ >= 11)) || defined __OpenBSD__ || (defined _WIN32 && !defined __CYGWIN__)))
   /* This platform's <cmath> possibly defines isnan through a set of inline
      functions.  */
 _GL_MATH_CXX_REAL_FLOATING_DECL_2 (isnan, rpl_isnan, bool)
diff --git a/gl/sha1.c b/gl/sha1.c
deleted file mode 100644
index 79e50ba..0000000
--- a/gl/sha1.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/* sha1.c - Functions to compute SHA1 message digest of files or
-   memory blocks according to the NIST specification FIPS-180-1.
-
-   Copyright (C) 2000-2001, 2003-2006, 2008-2022 Free Software Foundation, Inc.
-
-   This file is free software: you can redistribute it and/or modify
-   it under the terms of the GNU Lesser General Public License as
-   published by the Free Software Foundation; either version 2.1 of the
-   License, or (at your option) any later version.
-
-   This file is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public License
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
-
-/* Written by Scott G. Miller
-   Credits:
-      Robert Klep <robert@ilse.nl>  -- Expansion function fix
-*/
-
-#include <config.h>
-
-/* Specification.  */
-#if HAVE_OPENSSL_SHA1
-# define GL_OPENSSL_INLINE _GL_EXTERN_INLINE
-#endif
-#include "sha1.h"
-
-#include <stdalign.h>
-#include <stdint.h>
-#include <string.h>
-
-#include <byteswap.h>
-#ifdef WORDS_BIGENDIAN
-# define SWAP(n) (n)
-#else
-# define SWAP(n) bswap_32 (n)
-#endif
-
-#if ! HAVE_OPENSSL_SHA1
-
-/* This array contains the bytes used to pad the buffer to the next
-   64-byte boundary.  (RFC 1321, 3.1: Step 1)  */
-static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ...  */ };
-
-
-/* Take a pointer to a 160 bit block of data (five 32 bit ints) and
-   initialize it to the start constants of the SHA1 algorithm.  This
-   must be called before using hash in the call to sha1_hash.  */
-void
-sha1_init_ctx (struct sha1_ctx *ctx)
-{
-  ctx->A = 0x67452301;
-  ctx->B = 0xefcdab89;
-  ctx->C = 0x98badcfe;
-  ctx->D = 0x10325476;
-  ctx->E = 0xc3d2e1f0;
-
-  ctx->total[0] = ctx->total[1] = 0;
-  ctx->buflen = 0;
-}
-
-/* Copy the 4 byte value from v into the memory location pointed to by *cp,
-   If your architecture allows unaligned access this is equivalent to
-   * (uint32_t *) cp = v  */
-static void
-set_uint32 (char *cp, uint32_t v)
-{
-  memcpy (cp, &v, sizeof v);
-}
-
-/* Put result from CTX in first 20 bytes following RESBUF.  The result
-   must be in little endian byte order.  */
-void *
-sha1_read_ctx (const struct sha1_ctx *ctx, void *resbuf)
-{
-  char *r = resbuf;
-  set_uint32 (r + 0 * sizeof ctx->A, SWAP (ctx->A));
-  set_uint32 (r + 1 * sizeof ctx->B, SWAP (ctx->B));
-  set_uint32 (r + 2 * sizeof ctx->C, SWAP (ctx->C));
-  set_uint32 (r + 3 * sizeof ctx->D, SWAP (ctx->D));
-  set_uint32 (r + 4 * sizeof ctx->E, SWAP (ctx->E));
-
-  return resbuf;
-}
-
-/* Process the remaining bytes in the internal buffer and the usual
-   prolog according to the standard and write the result to RESBUF.  */
-void *
-sha1_finish_ctx (struct sha1_ctx *ctx, void *resbuf)
-{
-  /* Take yet unprocessed bytes into account.  */
-  uint32_t bytes = ctx->buflen;
-  size_t size = (bytes < 56) ? 64 / 4 : 64 * 2 / 4;
-
-  /* Now count remaining bytes.  */
-  ctx->total[0] += bytes;
-  if (ctx->total[0] < bytes)
-    ++ctx->total[1];
-
-  /* Put the 64-bit file length in *bits* at the end of the buffer.  */
-  ctx->buffer[size - 2] = SWAP ((ctx->total[1] << 3) | (ctx->total[0] >> 29));
-  ctx->buffer[size - 1] = SWAP (ctx->total[0] << 3);
-
-  memcpy (&((char *) ctx->buffer)[bytes], fillbuf, (size - 2) * 4 - bytes);
-
-  /* Process last bytes.  */
-  sha1_process_block (ctx->buffer, size * 4, ctx);
-
-  return sha1_read_ctx (ctx, resbuf);
-}
-
-/* Compute SHA1 message digest for LEN bytes beginning at BUFFER.  The
-   result is always in little endian byte order, so that a byte-wise
-   output yields to the wanted ASCII representation of the message
-   digest.  */
-void *
-sha1_buffer (const char *buffer, size_t len, void *resblock)
-{
-  struct sha1_ctx ctx;
-
-  /* Initialize the computation context.  */
-  sha1_init_ctx (&ctx);
-
-  /* Process whole buffer but last len % 64 bytes.  */
-  sha1_process_bytes (buffer, len, &ctx);
-
-  /* Put result in desired memory area.  */
-  return sha1_finish_ctx (&ctx, resblock);
-}
-
-void
-sha1_process_bytes (const void *buffer, size_t len, struct sha1_ctx *ctx)
-{
-  /* When we already have some bits in our internal buffer concatenate
-     both inputs first.  */
-  if (ctx->buflen != 0)
-    {
-      size_t left_over = ctx->buflen;
-      size_t add = 128 - left_over > len ? len : 128 - left_over;
-
-      memcpy (&((char *) ctx->buffer)[left_over], buffer, add);
-      ctx->buflen += add;
-
-      if (ctx->buflen > 64)
-        {
-          sha1_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
-
-          ctx->buflen &= 63;
-          /* The regions in the following copy operation cannot overlap,
-             because ctx->buflen < 64 ≤ (left_over + add) & ~63.  */
-          memcpy (ctx->buffer,
-                  &((char *) ctx->buffer)[(left_over + add) & ~63],
-                  ctx->buflen);
-        }
-
-      buffer = (const char *) buffer + add;
-      len -= add;
-    }
-
-  /* Process available complete blocks.  */
-  if (len >= 64)
-    {
-#if !(_STRING_ARCH_unaligned || _STRING_INLINE_unaligned)
-# define UNALIGNED_P(p) ((uintptr_t) (p) % alignof (uint32_t) != 0)
-      if (UNALIGNED_P (buffer))
-        while (len > 64)
-          {
-            sha1_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
-            buffer = (const char *) buffer + 64;
-            len -= 64;
-          }
-      else
-#endif
-        {
-          sha1_process_block (buffer, len & ~63, ctx);
-          buffer = (const char *) buffer + (len & ~63);
-          len &= 63;
-        }
-    }
-
-  /* Move remaining bytes in internal buffer.  */
-  if (len > 0)
-    {
-      size_t left_over = ctx->buflen;
-
-      memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
-      left_over += len;
-      if (left_over >= 64)
-        {
-          sha1_process_block (ctx->buffer, 64, ctx);
-          left_over -= 64;
-          /* The regions in the following copy operation cannot overlap,
-             because left_over ≤ 64.  */
-          memcpy (ctx->buffer, &ctx->buffer[16], left_over);
-        }
-      ctx->buflen = left_over;
-    }
-}
-
-/* --- Code below is the primary difference between md5.c and sha1.c --- */
-
-/* SHA1 round constants */
-#define K1 0x5a827999
-#define K2 0x6ed9eba1
-#define K3 0x8f1bbcdc
-#define K4 0xca62c1d6
-
-/* Round functions.  Note that F2 is the same as F4.  */
-#define F1(B,C,D) ( D ^ ( B & ( C ^ D ) ) )
-#define F2(B,C,D) (B ^ C ^ D)
-#define F3(B,C,D) ( ( B & C ) | ( D & ( B | C ) ) )
-#define F4(B,C,D) (B ^ C ^ D)
-
-/* Process LEN bytes of BUFFER, accumulating context into CTX.
-   It is assumed that LEN % 64 == 0.
-   Most of this code comes from GnuPG's cipher/sha1.c.  */
-
-void
-sha1_process_block (const void *buffer, size_t len, struct sha1_ctx *ctx)
-{
-  const uint32_t *words = buffer;
-  size_t nwords = len / sizeof (uint32_t);
-  const uint32_t *endp = words + nwords;
-  uint32_t x[16];
-  uint32_t a = ctx->A;
-  uint32_t b = ctx->B;
-  uint32_t c = ctx->C;
-  uint32_t d = ctx->D;
-  uint32_t e = ctx->E;
-  uint32_t lolen = len;
-
-  /* First increment the byte count.  RFC 1321 specifies the possible
-     length of the file up to 2^64 bits.  Here we only compute the
-     number of bytes.  Do a double word increment.  */
-  ctx->total[0] += lolen;
-  ctx->total[1] += (len >> 31 >> 1) + (ctx->total[0] < lolen);
-
-#define rol(x, n) (((x) << (n)) | ((uint32_t) (x) >> (32 - (n))))
-
-#define M(I) ( tm =   x[I&0x0f] ^ x[(I-14)&0x0f] \
-                    ^ x[(I-8)&0x0f] ^ x[(I-3)&0x0f] \
-               , (x[I&0x0f] = rol(tm, 1)) )
-
-#define R(A,B,C,D,E,F,K,M)  do { E += rol( A, 5 )     \
-                                      + F( B, C, D )  \
-                                      + K             \
-                                      + M;            \
-                                 B = rol( B, 30 );    \
-                               } while(0)
-
-  while (words < endp)
-    {
-      uint32_t tm;
-      int t;
-      for (t = 0; t < 16; t++)
-        {
-          x[t] = SWAP (*words);
-          words++;
-        }
-
-      R( a, b, c, d, e, F1, K1, x[ 0] );
-      R( e, a, b, c, d, F1, K1, x[ 1] );
-      R( d, e, a, b, c, F1, K1, x[ 2] );
-      R( c, d, e, a, b, F1, K1, x[ 3] );
-      R( b, c, d, e, a, F1, K1, x[ 4] );
-      R( a, b, c, d, e, F1, K1, x[ 5] );
-      R( e, a, b, c, d, F1, K1, x[ 6] );
-      R( d, e, a, b, c, F1, K1, x[ 7] );
-      R( c, d, e, a, b, F1, K1, x[ 8] );
-      R( b, c, d, e, a, F1, K1, x[ 9] );
-      R( a, b, c, d, e, F1, K1, x[10] );
-      R( e, a, b, c, d, F1, K1, x[11] );
-      R( d, e, a, b, c, F1, K1, x[12] );
-      R( c, d, e, a, b, F1, K1, x[13] );
-      R( b, c, d, e, a, F1, K1, x[14] );
-      R( a, b, c, d, e, F1, K1, x[15] );
-      R( e, a, b, c, d, F1, K1, M(16) );
-      R( d, e, a, b, c, F1, K1, M(17) );
-      R( c, d, e, a, b, F1, K1, M(18) );
-      R( b, c, d, e, a, F1, K1, M(19) );
-      R( a, b, c, d, e, F2, K2, M(20) );
-      R( e, a, b, c, d, F2, K2, M(21) );
-      R( d, e, a, b, c, F2, K2, M(22) );
-      R( c, d, e, a, b, F2, K2, M(23) );
-      R( b, c, d, e, a, F2, K2, M(24) );
-      R( a, b, c, d, e, F2, K2, M(25) );
-      R( e, a, b, c, d, F2, K2, M(26) );
-      R( d, e, a, b, c, F2, K2, M(27) );
-      R( c, d, e, a, b, F2, K2, M(28) );
-      R( b, c, d, e, a, F2, K2, M(29) );
-      R( a, b, c, d, e, F2, K2, M(30) );
-      R( e, a, b, c, d, F2, K2, M(31) );
-      R( d, e, a, b, c, F2, K2, M(32) );
-      R( c, d, e, a, b, F2, K2, M(33) );
-      R( b, c, d, e, a, F2, K2, M(34) );
-      R( a, b, c, d, e, F2, K2, M(35) );
-      R( e, a, b, c, d, F2, K2, M(36) );
-      R( d, e, a, b, c, F2, K2, M(37) );
-      R( c, d, e, a, b, F2, K2, M(38) );
-      R( b, c, d, e, a, F2, K2, M(39) );
-      R( a, b, c, d, e, F3, K3, M(40) );
-      R( e, a, b, c, d, F3, K3, M(41) );
-      R( d, e, a, b, c, F3, K3, M(42) );
-      R( c, d, e, a, b, F3, K3, M(43) );
-      R( b, c, d, e, a, F3, K3, M(44) );
-      R( a, b, c, d, e, F3, K3, M(45) );
-      R( e, a, b, c, d, F3, K3, M(46) );
-      R( d, e, a, b, c, F3, K3, M(47) );
-      R( c, d, e, a, b, F3, K3, M(48) );
-      R( b, c, d, e, a, F3, K3, M(49) );
-      R( a, b, c, d, e, F3, K3, M(50) );
-      R( e, a, b, c, d, F3, K3, M(51) );
-      R( d, e, a, b, c, F3, K3, M(52) );
-      R( c, d, e, a, b, F3, K3, M(53) );
-      R( b, c, d, e, a, F3, K3, M(54) );
-      R( a, b, c, d, e, F3, K3, M(55) );
-      R( e, a, b, c, d, F3, K3, M(56) );
-      R( d, e, a, b, c, F3, K3, M(57) );
-      R( c, d, e, a, b, F3, K3, M(58) );
-      R( b, c, d, e, a, F3, K3, M(59) );
-      R( a, b, c, d, e, F4, K4, M(60) );
-      R( e, a, b, c, d, F4, K4, M(61) );
-      R( d, e, a, b, c, F4, K4, M(62) );
-      R( c, d, e, a, b, F4, K4, M(63) );
-      R( b, c, d, e, a, F4, K4, M(64) );
-      R( a, b, c, d, e, F4, K4, M(65) );
-      R( e, a, b, c, d, F4, K4, M(66) );
-      R( d, e, a, b, c, F4, K4, M(67) );
-      R( c, d, e, a, b, F4, K4, M(68) );
-      R( b, c, d, e, a, F4, K4, M(69) );
-      R( a, b, c, d, e, F4, K4, M(70) );
-      R( e, a, b, c, d, F4, K4, M(71) );
-      R( d, e, a, b, c, F4, K4, M(72) );
-      R( c, d, e, a, b, F4, K4, M(73) );
-      R( b, c, d, e, a, F4, K4, M(74) );
-      R( a, b, c, d, e, F4, K4, M(75) );
-      R( e, a, b, c, d, F4, K4, M(76) );
-      R( d, e, a, b, c, F4, K4, M(77) );
-      R( c, d, e, a, b, F4, K4, M(78) );
-      R( b, c, d, e, a, F4, K4, M(79) );
-
-      a = ctx->A += a;
-      b = ctx->B += b;
-      c = ctx->C += c;
-      d = ctx->D += d;
-      e = ctx->E += e;
-    }
-}
-
-#endif
-
-/*
- * Hey Emacs!
- * Local Variables:
- * coding: utf-8
- * End:
- */
diff --git a/gl/sha1-stream.c b/gl/sha256-stream.c
index 0ba0435..c2e6398 100644
--- a/gl/sha1-stream.c
+++ b/gl/sha256-stream.c
@@ -1,7 +1,7 @@
-/* sha1.c - Functions to compute SHA1 message digest of files or
-   memory blocks according to the NIST specification FIPS-180-1.
+/* sha256.c - Functions to compute SHA256 and SHA224 message digest of files or
+   memory blocks according to the NIST specification FIPS-180-2.
 
-   Copyright (C) 2000-2001, 2003-2006, 2008-2022 Free Software Foundation, Inc.
+   Copyright (C) 2005-2006, 2008-2022 Free Software Foundation, Inc.
 
    This file is free software: you can redistribute it and/or modify
    it under the terms of the GNU Lesser General Public License as
@@ -16,18 +16,17 @@
    You should have received a copy of the GNU Lesser General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
 
-/* Written by Scott G. Miller
-   Credits:
-      Robert Klep <robert@ilse.nl>  -- Expansion function fix
+/* Written by David Madore, considerably copypasting from
+   Scott G. Miller's sha1.c
 */
 
 #include <config.h>
 
 /* Specification.  */
-#if HAVE_OPENSSL_SHA1
+#if HAVE_OPENSSL_SHA256
 # define GL_OPENSSL_INLINE _GL_EXTERN_INLINE
 #endif
-#include "sha1.h"
+#include "sha256.h"
 
 #include <stdlib.h>
 
@@ -42,13 +41,16 @@
 # error "invalid BLOCKSIZE"
 #endif
 
-/* Compute SHA1 message digest for bytes read from STREAM.  The
-   resulting message digest number will be written into the 20 bytes
-   beginning at RESBLOCK.  */
-int
-sha1_stream (FILE *stream, void *resblock)
+/* Compute message digest for bytes read from STREAM using algorithm ALG.
+   Write the message digest into RESBLOCK, which contains HASHLEN bytes.
+   The initial and finishing operations are INIT_CTX and FINISH_CTX.
+   Return zero if and only if successful.  */
+static int
+shaxxx_stream (FILE *stream, char const *alg, void *resblock,
+               ssize_t hashlen, void (*init_ctx) (struct sha256_ctx *),
+               void *(*finish_ctx) (struct sha256_ctx *, void *))
 {
-  switch (afalg_stream (stream, "sha1", resblock, SHA1_DIGEST_SIZE))
+  switch (afalg_stream (stream, alg, resblock, hashlen))
     {
     case 0: return 0;
     case -EIO: return 1;
@@ -58,8 +60,8 @@ sha1_stream (FILE *stream, void *resblock)
   if (!buffer)
     return 1;
 
-  struct sha1_ctx ctx;
-  sha1_init_ctx (&ctx);
+  struct sha256_ctx ctx;
+  init_ctx (&ctx);
   size_t sum;
 
   /* Iterate over full file contents.  */
@@ -106,21 +108,35 @@ sha1_stream (FILE *stream, void *resblock)
       /* Process buffer with BLOCKSIZE bytes.  Note that
                         BLOCKSIZE % 64 == 0
        */
-      sha1_process_block (buffer, BLOCKSIZE, &ctx);
+      sha256_process_block (buffer, BLOCKSIZE, &ctx);
     }
 
  process_partial_block:;
 
   /* Process any remaining bytes.  */
   if (sum > 0)
-    sha1_process_bytes (buffer, sum, &ctx);
+    sha256_process_bytes (buffer, sum, &ctx);
 
   /* Construct result in desired memory.  */
-  sha1_finish_ctx (&ctx, resblock);
+  finish_ctx (&ctx, resblock);
   free (buffer);
   return 0;
 }
 
+int
+sha256_stream (FILE *stream, void *resblock)
+{
+  return shaxxx_stream (stream, "sha256", resblock, SHA256_DIGEST_SIZE,
+                        sha256_init_ctx, sha256_finish_ctx);
+}
+
+int
+sha224_stream (FILE *stream, void *resblock)
+{
+  return shaxxx_stream (stream, "sha224", resblock, SHA224_DIGEST_SIZE,
+                        sha224_init_ctx, sha224_finish_ctx);
+}
+
 /*
  * Hey Emacs!
  * Local Variables:
diff --git a/gl/sha256.c b/gl/sha256.c
new file mode 100644
index 0000000..c9ca618
--- /dev/null
+++ b/gl/sha256.c
@@ -0,0 +1,433 @@
+/* sha256.c - Functions to compute SHA256 and SHA224 message digest of files or
+   memory blocks according to the NIST specification FIPS-180-2.
+
+   Copyright (C) 2005-2006, 2008-2022 Free Software Foundation, Inc.
+
+   This file is free software: you can redistribute it and/or modify
+   it under the terms of the GNU Lesser General Public License as
+   published by the Free Software Foundation; either version 2.1 of the
+   License, or (at your option) any later version.
+
+   This file is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public License
+   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
+
+/* Written by David Madore, considerably copypasting from
+   Scott G. Miller's sha1.c
+*/
+
+#include <config.h>
+
+/* Specification.  */
+#if HAVE_OPENSSL_SHA256
+# define GL_OPENSSL_INLINE _GL_EXTERN_INLINE
+#endif
+#include "sha256.h"
+
+#include <stdalign.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <byteswap.h>
+#ifdef WORDS_BIGENDIAN
+# define SWAP(n) (n)
+#else
+# define SWAP(n) bswap_32 (n)
+#endif
+
+#if ! HAVE_OPENSSL_SHA256
+
+/* This array contains the bytes used to pad the buffer to the next
+   64-byte boundary.  */
+static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ...  */ };
+
+
+/*
+  Takes a pointer to a 256 bit block of data (eight 32 bit ints) and
+  initializes it to the start constants of the SHA256 algorithm.  This
+  must be called before using hash in the call to sha256_hash
+*/
+void
+sha256_init_ctx (struct sha256_ctx *ctx)
+{
+  ctx->state[0] = 0x6a09e667UL;
+  ctx->state[1] = 0xbb67ae85UL;
+  ctx->state[2] = 0x3c6ef372UL;
+  ctx->state[3] = 0xa54ff53aUL;
+  ctx->state[4] = 0x510e527fUL;
+  ctx->state[5] = 0x9b05688cUL;
+  ctx->state[6] = 0x1f83d9abUL;
+  ctx->state[7] = 0x5be0cd19UL;
+
+  ctx->total[0] = ctx->total[1] = 0;
+  ctx->buflen = 0;
+}
+
+void
+sha224_init_ctx (struct sha256_ctx *ctx)
+{
+  ctx->state[0] = 0xc1059ed8UL;
+  ctx->state[1] = 0x367cd507UL;
+  ctx->state[2] = 0x3070dd17UL;
+  ctx->state[3] = 0xf70e5939UL;
+  ctx->state[4] = 0xffc00b31UL;
+  ctx->state[5] = 0x68581511UL;
+  ctx->state[6] = 0x64f98fa7UL;
+  ctx->state[7] = 0xbefa4fa4UL;
+
+  ctx->total[0] = ctx->total[1] = 0;
+  ctx->buflen = 0;
+}
+
+/* Copy the value from v into the memory location pointed to by *CP,
+   If your architecture allows unaligned access, this is equivalent to
+   * (__typeof__ (v) *) cp = v  */
+static void
+set_uint32 (char *cp, uint32_t v)
+{
+  memcpy (cp, &v, sizeof v);
+}
+
+/* Put result from CTX in first 32 bytes following RESBUF.
+   The result must be in little endian byte order.  */
+void *
+sha256_read_ctx (const struct sha256_ctx *ctx, void *resbuf)
+{
+  int i;
+  char *r = resbuf;
+
+  for (i = 0; i < 8; i++)
+    set_uint32 (r + i * sizeof ctx->state[0], SWAP (ctx->state[i]));
+
+  return resbuf;
+}
+
+void *
+sha224_read_ctx (const struct sha256_ctx *ctx, void *resbuf)
+{
+  int i;
+  char *r = resbuf;
+
+  for (i = 0; i < 7; i++)
+    set_uint32 (r + i * sizeof ctx->state[0], SWAP (ctx->state[i]));
+
+  return resbuf;
+}
+
+/* Process the remaining bytes in the internal buffer and the usual
+   prolog according to the standard and write the result to RESBUF.  */
+static void
+sha256_conclude_ctx (struct sha256_ctx *ctx)
+{
+  /* Take yet unprocessed bytes into account.  */
+  size_t bytes = ctx->buflen;
+  size_t size = (bytes < 56) ? 64 / 4 : 64 * 2 / 4;
+
+  /* Now count remaining bytes.  */
+  ctx->total[0] += bytes;
+  if (ctx->total[0] < bytes)
+    ++ctx->total[1];
+
+  /* Put the 64-bit file length in *bits* at the end of the buffer.
+     Use set_uint32 rather than a simple assignment, to avoid risk of
+     unaligned access.  */
+  set_uint32 ((char *) &ctx->buffer[size - 2],
+              SWAP ((ctx->total[1] << 3) | (ctx->total[0] >> 29)));
+  set_uint32 ((char *) &ctx->buffer[size - 1],
+              SWAP (ctx->total[0] << 3));
+
+  memcpy (&((char *) ctx->buffer)[bytes], fillbuf, (size - 2) * 4 - bytes);
+
+  /* Process last bytes.  */
+  sha256_process_block (ctx->buffer, size * 4, ctx);
+}
+
+void *
+sha256_finish_ctx (struct sha256_ctx *ctx, void *resbuf)
+{
+  sha256_conclude_ctx (ctx);
+  return sha256_read_ctx (ctx, resbuf);
+}
+
+void *
+sha224_finish_ctx (struct sha256_ctx *ctx, void *resbuf)
+{
+  sha256_conclude_ctx (ctx);
+  return sha224_read_ctx (ctx, resbuf);
+}
+
+/* Compute SHA256 message digest for LEN bytes beginning at BUFFER.  The
+   result is always in little endian byte order, so that a byte-wise
+   output yields to the wanted ASCII representation of the message
+   digest.  */
+void *
+sha256_buffer (const char *buffer, size_t len, void *resblock)
+{
+  struct sha256_ctx ctx;
+
+  /* Initialize the computation context.  */
+  sha256_init_ctx (&ctx);
+
+  /* Process whole buffer but last len % 64 bytes.  */
+  sha256_process_bytes (buffer, len, &ctx);
+
+  /* Put result in desired memory area.  */
+  return sha256_finish_ctx (&ctx, resblock);
+}
+
+void *
+sha224_buffer (const char *buffer, size_t len, void *resblock)
+{
+  struct sha256_ctx ctx;
+
+  /* Initialize the computation context.  */
+  sha224_init_ctx (&ctx);
+
+  /* Process whole buffer but last len % 64 bytes.  */
+  sha256_process_bytes (buffer, len, &ctx);
+
+  /* Put result in desired memory area.  */
+  return sha224_finish_ctx (&ctx, resblock);
+}
+
+void
+sha256_process_bytes (const void *buffer, size_t len, struct sha256_ctx *ctx)
+{
+  /* When we already have some bits in our internal buffer concatenate
+     both inputs first.  */
+  if (ctx->buflen != 0)
+    {
+      size_t left_over = ctx->buflen;
+      size_t add = 128 - left_over > len ? len : 128 - left_over;
+
+      memcpy (&((char *) ctx->buffer)[left_over], buffer, add);
+      ctx->buflen += add;
+
+      if (ctx->buflen > 64)
+        {
+          sha256_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+
+          ctx->buflen &= 63;
+          /* The regions in the following copy operation cannot overlap,
+             because ctx->buflen < 64 ≤ (left_over + add) & ~63.  */
+          memcpy (ctx->buffer,
+                  &((char *) ctx->buffer)[(left_over + add) & ~63],
+                  ctx->buflen);
+        }
+
+      buffer = (const char *) buffer + add;
+      len -= add;
+    }
+
+  /* Process available complete blocks.  */
+  if (len >= 64)
+    {
+#if !(_STRING_ARCH_unaligned || _STRING_INLINE_unaligned)
+# define UNALIGNED_P(p) ((uintptr_t) (p) % alignof (uint32_t) != 0)
+      if (UNALIGNED_P (buffer))
+        while (len > 64)
+          {
+            sha256_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+            buffer = (const char *) buffer + 64;
+            len -= 64;
+          }
+      else
+#endif
+        {
+          sha256_process_block (buffer, len & ~63, ctx);
+          buffer = (const char *) buffer + (len & ~63);
+          len &= 63;
+        }
+    }
+
+  /* Move remaining bytes in internal buffer.  */
+  if (len > 0)
+    {
+      size_t left_over = ctx->buflen;
+
+      memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
+      left_over += len;
+      if (left_over >= 64)
+        {
+          sha256_process_block (ctx->buffer, 64, ctx);
+          left_over -= 64;
+          /* The regions in the following copy operation cannot overlap,
+             because left_over ≤ 64.  */
+          memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+        }
+      ctx->buflen = left_over;
+    }
+}
+
+/* --- Code below is the primary difference between sha1.c and sha256.c --- */
+
+/* SHA256 round constants */
+#define K(I) sha256_round_constants[I]
+static const uint32_t sha256_round_constants[64] = {
+  0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL,
+  0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL,
+  0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL,
+  0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL,
+  0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
+  0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL,
+  0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL,
+  0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL,
+  0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL,
+  0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
+  0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL,
+  0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL,
+  0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL,
+  0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL,
+  0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
+  0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL,
+};
+
+/* Round functions.  */
+#define F2(A,B,C) ( ( A & B ) | ( C & ( A | B ) ) )
+#define F1(E,F,G) ( G ^ ( E & ( F ^ G ) ) )
+
+/* Process LEN bytes of BUFFER, accumulating context into CTX.
+   It is assumed that LEN % 64 == 0.
+   Most of this code comes from GnuPG's cipher/sha1.c.  */
+
+void
+sha256_process_block (const void *buffer, size_t len, struct sha256_ctx *ctx)
+{
+  const uint32_t *words = buffer;
+  size_t nwords = len / sizeof (uint32_t);
+  const uint32_t *endp = words + nwords;
+  uint32_t x[16];
+  uint32_t a = ctx->state[0];
+  uint32_t b = ctx->state[1];
+  uint32_t c = ctx->state[2];
+  uint32_t d = ctx->state[3];
+  uint32_t e = ctx->state[4];
+  uint32_t f = ctx->state[5];
+  uint32_t g = ctx->state[6];
+  uint32_t h = ctx->state[7];
+  uint32_t lolen = len;
+
+  /* First increment the byte count.  FIPS PUB 180-2 specifies the possible
+     length of the file up to 2^64 bits.  Here we only compute the
+     number of bytes.  Do a double word increment.  */
+  ctx->total[0] += lolen;
+  ctx->total[1] += (len >> 31 >> 1) + (ctx->total[0] < lolen);
+
+#define rol(x, n) (((x) << (n)) | ((x) >> (32 - (n))))
+#define S0(x) (rol(x,25)^rol(x,14)^(x>>3))
+#define S1(x) (rol(x,15)^rol(x,13)^(x>>10))
+#define SS0(x) (rol(x,30)^rol(x,19)^rol(x,10))
+#define SS1(x) (rol(x,26)^rol(x,21)^rol(x,7))
+
+#define M(I) ( tm =   S1(x[(I-2)&0x0f]) + x[(I-7)&0x0f] \
+                    + S0(x[(I-15)&0x0f]) + x[I&0x0f]    \
+               , x[I&0x0f] = tm )
+
+#define R(A,B,C,D,E,F,G,H,K,M)  do { t0 = SS0(A) + F2(A,B,C); \
+                                     t1 = H + SS1(E)  \
+                                      + F1(E,F,G)     \
+                                      + K             \
+                                      + M;            \
+                                     D += t1;  H = t0 + t1; \
+                               } while(0)
+
+  while (words < endp)
+    {
+      uint32_t tm;
+      uint32_t t0, t1;
+      int t;
+      /* FIXME: see sha1.c for a better implementation.  */
+      for (t = 0; t < 16; t++)
+        {
+          x[t] = SWAP (*words);
+          words++;
+        }
+
+      R( a, b, c, d, e, f, g, h, K( 0), x[ 0] );
+      R( h, a, b, c, d, e, f, g, K( 1), x[ 1] );
+      R( g, h, a, b, c, d, e, f, K( 2), x[ 2] );
+      R( f, g, h, a, b, c, d, e, K( 3), x[ 3] );
+      R( e, f, g, h, a, b, c, d, K( 4), x[ 4] );
+      R( d, e, f, g, h, a, b, c, K( 5), x[ 5] );
+      R( c, d, e, f, g, h, a, b, K( 6), x[ 6] );
+      R( b, c, d, e, f, g, h, a, K( 7), x[ 7] );
+      R( a, b, c, d, e, f, g, h, K( 8), x[ 8] );
+      R( h, a, b, c, d, e, f, g, K( 9), x[ 9] );
+      R( g, h, a, b, c, d, e, f, K(10), x[10] );
+      R( f, g, h, a, b, c, d, e, K(11), x[11] );
+      R( e, f, g, h, a, b, c, d, K(12), x[12] );
+      R( d, e, f, g, h, a, b, c, K(13), x[13] );
+      R( c, d, e, f, g, h, a, b, K(14), x[14] );
+      R( b, c, d, e, f, g, h, a, K(15), x[15] );
+      R( a, b, c, d, e, f, g, h, K(16), M(16) );
+      R( h, a, b, c, d, e, f, g, K(17), M(17) );
+      R( g, h, a, b, c, d, e, f, K(18), M(18) );
+      R( f, g, h, a, b, c, d, e, K(19), M(19) );
+      R( e, f, g, h, a, b, c, d, K(20), M(20) );
+      R( d, e, f, g, h, a, b, c, K(21), M(21) );
+      R( c, d, e, f, g, h, a, b, K(22), M(22) );
+      R( b, c, d, e, f, g, h, a, K(23), M(23) );
+      R( a, b, c, d, e, f, g, h, K(24), M(24) );
+      R( h, a, b, c, d, e, f, g, K(25), M(25) );
+      R( g, h, a, b, c, d, e, f, K(26), M(26) );
+      R( f, g, h, a, b, c, d, e, K(27), M(27) );
+      R( e, f, g, h, a, b, c, d, K(28), M(28) );
+      R( d, e, f, g, h, a, b, c, K(29), M(29) );
+      R( c, d, e, f, g, h, a, b, K(30), M(30) );
+      R( b, c, d, e, f, g, h, a, K(31), M(31) );
+      R( a, b, c, d, e, f, g, h, K(32), M(32) );
+      R( h, a, b, c, d, e, f, g, K(33), M(33) );
+      R( g, h, a, b, c, d, e, f, K(34), M(34) );
+      R( f, g, h, a, b, c, d, e, K(35), M(35) );
+      R( e, f, g, h, a, b, c, d, K(36), M(36) );
+      R( d, e, f, g, h, a, b, c, K(37), M(37) );
+      R( c, d, e, f, g, h, a, b, K(38), M(38) );
+      R( b, c, d, e, f, g, h, a, K(39), M(39) );
+      R( a, b, c, d, e, f, g, h, K(40), M(40) );
+      R( h, a, b, c, d, e, f, g, K(41), M(41) );
+      R( g, h, a, b, c, d, e, f, K(42), M(42) );
+      R( f, g, h, a, b, c, d, e, K(43), M(43) );
+      R( e, f, g, h, a, b, c, d, K(44), M(44) );
+      R( d, e, f, g, h, a, b, c, K(45), M(45) );
+      R( c, d, e, f, g, h, a, b, K(46), M(46) );
+      R( b, c, d, e, f, g, h, a, K(47), M(47) );
+      R( a, b, c, d, e, f, g, h, K(48), M(48) );
+      R( h, a, b, c, d, e, f, g, K(49), M(49) );
+      R( g, h, a, b, c, d, e, f, K(50), M(50) );
+      R( f, g, h, a, b, c, d, e, K(51), M(51) );
+      R( e, f, g, h, a, b, c, d, K(52), M(52) );
+      R( d, e, f, g, h, a, b, c, K(53), M(53) );
+      R( c, d, e, f, g, h, a, b, K(54), M(54) );
+      R( b, c, d, e, f, g, h, a, K(55), M(55) );
+      R( a, b, c, d, e, f, g, h, K(56), M(56) );
+      R( h, a, b, c, d, e, f, g, K(57), M(57) );
+      R( g, h, a, b, c, d, e, f, K(58), M(58) );
+      R( f, g, h, a, b, c, d, e, K(59), M(59) );
+      R( e, f, g, h, a, b, c, d, K(60), M(60) );
+      R( d, e, f, g, h, a, b, c, K(61), M(61) );
+      R( c, d, e, f, g, h, a, b, K(62), M(62) );
+      R( b, c, d, e, f, g, h, a, K(63), M(63) );
+
+      a = ctx->state[0] += a;
+      b = ctx->state[1] += b;
+      c = ctx->state[2] += c;
+      d = ctx->state[3] += d;
+      e = ctx->state[4] += e;
+      f = ctx->state[5] += f;
+      g = ctx->state[6] += g;
+      h = ctx->state[7] += h;
+    }
+}
+
+#endif
+
+/*
+ * Hey Emacs!
+ * Local Variables:
+ * coding: utf-8
+ * End:
+ */
diff --git a/gl/sha1.h b/gl/sha256.h
index bc3470a..533173a 100644
--- a/gl/sha1.h
+++ b/gl/sha256.h
@@ -1,7 +1,6 @@
-/* Declarations of functions and data types used for SHA1 sum
+/* Declarations of functions and data types used for SHA256 and SHA224 sum
    library functions.
-   Copyright (C) 2000-2001, 2003, 2005-2006, 2008-2022 Free Software
-   Foundation, Inc.
+   Copyright (C) 2005-2006, 2008-2022 Free Software Foundation, Inc.
 
    This file is free software: you can redistribute it and/or modify
    it under the terms of the GNU Lesser General Public License as
@@ -16,13 +15,13 @@
    You should have received a copy of the GNU Lesser General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
 
-#ifndef SHA1_H
-# define SHA1_H 1
+#ifndef SHA256_H
+# define SHA256_H 1
 
 # include <stdio.h>
 # include <stdint.h>
 
-# if HAVE_OPENSSL_SHA1
+# if HAVE_OPENSSL_SHA256
 #  ifndef OPENSSL_API_COMPAT
 #   define OPENSSL_API_COMPAT 0x10101000L /* FIXME: Use OpenSSL 1.1+ API.  */
 #  endif
@@ -33,72 +32,79 @@
 extern "C" {
 # endif
 
-# define SHA1_DIGEST_SIZE 20
+enum { SHA224_DIGEST_SIZE = 224 / 8 };
+enum { SHA256_DIGEST_SIZE = 256 / 8 };
 
-# if HAVE_OPENSSL_SHA1
-#  define GL_OPENSSL_NAME 1
+# if HAVE_OPENSSL_SHA256
+#  define GL_OPENSSL_NAME 224
+#  include "gl_openssl.h"
+#  define GL_OPENSSL_NAME 256
 #  include "gl_openssl.h"
 # else
 /* Structure to save state of computation between the single steps.  */
-struct sha1_ctx
+struct sha256_ctx
 {
-  uint32_t A;
-  uint32_t B;
-  uint32_t C;
-  uint32_t D;
-  uint32_t E;
+  uint32_t state[8];
 
   uint32_t total[2];
-  uint32_t buflen;     /* ≥ 0, ≤ 128 */
+  size_t buflen;       /* ≥ 0, ≤ 128 */
   uint32_t buffer[32]; /* 128 bytes; the first buflen bytes are in use */
 };
 
 /* Initialize structure containing state of computation. */
-extern void sha1_init_ctx (struct sha1_ctx *ctx);
+extern void sha256_init_ctx (struct sha256_ctx *ctx);
+extern void sha224_init_ctx (struct sha256_ctx *ctx);
 
 /* Starting with the result of former calls of this function (or the
    initialization function update the context for the next LEN bytes
    starting at BUFFER.
    It is necessary that LEN is a multiple of 64!!! */
-extern void sha1_process_block (const void *buffer, size_t len,
-                                struct sha1_ctx *ctx);
+extern void sha256_process_block (const void *buffer, size_t len,
+                                  struct sha256_ctx *ctx);
 
 /* Starting with the result of former calls of this function (or the
    initialization function update the context for the next LEN bytes
    starting at BUFFER.
    It is NOT required that LEN is a multiple of 64.  */
-extern void sha1_process_bytes (const void *buffer, size_t len,
-                                struct sha1_ctx *ctx);
+extern void sha256_process_bytes (const void *buffer, size_t len,
+                                  struct sha256_ctx *ctx);
 
 /* Process the remaining bytes in the buffer and put result from CTX
-   in first 20 bytes following RESBUF.  The result is always in little
+   in first 32 (28) bytes following RESBUF.  The result is always in little
    endian byte order, so that a byte-wise output yields to the wanted
    ASCII representation of the message digest.  */
-extern void *sha1_finish_ctx (struct sha1_ctx *ctx, void *restrict resbuf);
+extern void *sha256_finish_ctx (struct sha256_ctx *ctx, void *restrict resbuf);
+extern void *sha224_finish_ctx (struct sha256_ctx *ctx, void *restrict resbuf);
 
 
-/* Put result from CTX in first 20 bytes following RESBUF.  The result is
+/* Put result from CTX in first 32 (28) bytes following RESBUF.  The result is
    always in little endian byte order, so that a byte-wise output yields
    to the wanted ASCII representation of the message digest.  */
-extern void *sha1_read_ctx (const struct sha1_ctx *ctx, void *restrict resbuf);
+extern void *sha256_read_ctx (const struct sha256_ctx *ctx,
+                              void *restrict resbuf);
+extern void *sha224_read_ctx (const struct sha256_ctx *ctx,
+                              void *restrict resbuf);
 
 
-/* Compute SHA1 message digest for LEN bytes beginning at BUFFER.  The
-   result is always in little endian byte order, so that a byte-wise
+/* Compute SHA256 (SHA224) message digest for LEN bytes beginning at BUFFER.
+   The result is always in little endian byte order, so that a byte-wise
    output yields to the wanted ASCII representation of the message
    digest.  */
-extern void *sha1_buffer (const char *buffer, size_t len,
-                          void *restrict resblock);
+extern void *sha256_buffer (const char *buffer, size_t len,
+                            void *restrict resblock);
+extern void *sha224_buffer (const char *buffer, size_t len,
+                            void *restrict resblock);
 
 # endif
 
-/* Compute SHA1 message digest for bytes read from STREAM.
+/* Compute SHA256 (SHA224) message digest for bytes read from STREAM.
    STREAM is an open file stream.  Regular files are handled more efficiently.
    The contents of STREAM from its current position to its end will be read.
    The case that the last operation on STREAM was an 'ungetc' is not supported.
-   The resulting message digest number will be written into the 20 bytes
+   The resulting message digest number will be written into the 32 (28) bytes
    beginning at RESBLOCK.  */
-extern int sha1_stream (FILE *stream, void *resblock);
+extern int sha256_stream (FILE *stream, void *resblock);
+extern int sha224_stream (FILE *stream, void *resblock);
 
 
 # ifdef __cplusplus
diff --git a/gl/stdbool.in.h b/gl/stdbool.in.h
index 2fa4672..36f2656 100644
--- a/gl/stdbool.in.h
+++ b/gl/stdbool.in.h
@@ -59,8 +59,10 @@
 /* 7.16. Boolean type and values */
 
 #ifdef __cplusplus
-# define _Bool bool
-# define bool bool
+# if !defined _MSC_VER
+#  define _Bool bool
+#  define bool bool
+# endif
 #else
 # if !defined __GNUC__
    /* If @HAVE__BOOL@:
@@ -103,8 +105,10 @@ typedef enum { _Bool_must_promote_to_int = -1, false = 0, true = 1 } _Bool;
 
 /* The other macros must be usable in preprocessor directives.  */
 #ifdef __cplusplus
-# define false false
-# define true true
+# if !defined _MSC_VER
+#  define false false
+#  define true true
+# endif
 #else
 # define false 0
 # define true 1
diff --git a/gl/stdlib.in.h b/gl/stdlib.in.h
index a86643c..8e0a609 100644
--- a/gl/stdlib.in.h
+++ b/gl/stdlib.in.h
@@ -226,7 +226,7 @@ _GL_FUNCDECL_SYS (aligned_alloc, void *,
 _GL_CXXALIAS_SYS (aligned_alloc, void *, (size_t alignment, size_t size));
 #  endif
 # endif
-# if @HAVE_ALIGNED_ALLOC@
+# if (__GLIBC__ >= 2) && @HAVE_ALIGNED_ALLOC@
 _GL_CXXALIASWARN (aligned_alloc);
 # endif
 #else
@@ -1363,7 +1363,9 @@ _GL_CXXALIAS_SYS (strtol, long,
                   (const char *restrict string, char **restrict endptr,
                    int base));
 # endif
+# if __GLIBC__ >= 2
 _GL_CXXALIASWARN (strtol);
+# endif
 #elif defined GNULIB_POSIXCHECK
 # undef strtol
 # if HAVE_RAW_DECL_STRTOL
@@ -1444,7 +1446,9 @@ _GL_CXXALIAS_SYS (strtoul, unsigned long,
                   (const char *restrict string, char **restrict endptr,
                    int base));
 # endif
+# if __GLIBC__ >= 2
 _GL_CXXALIASWARN (strtoul);
+# endif
 #elif defined GNULIB_POSIXCHECK
 # undef strtoul
 # if HAVE_RAW_DECL_STRTOUL
diff --git a/gl/sys/stat.h b/gl/sys/stat.h
index 8120383..6858442 100644
--- a/gl/sys/stat.h
+++ b/gl/sys/stat.h
@@ -1104,44 +1104,6 @@ _GL_WARN_ON_USE (lchmod, "lchmod is unportable - "
 
 
 #if 0
-# if ! 1
-/* mingw does not support symlinks, therefore it does not have lstat.  But
-   without links, stat does just fine.  */
-#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-#   define lstat stat
-#  endif
-_GL_CXXALIAS_RPL_1 (lstat, stat, int,
-                    (const char *restrict name, struct stat *restrict buf));
-# elif 0
-#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-#   undef lstat
-#   define lstat rpl_lstat
-#  endif
-_GL_FUNCDECL_RPL (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf)
-                  _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf));
-# else
-_GL_CXXALIAS_SYS (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf));
-# endif
-# if 1
-_GL_CXXALIASWARN (lstat);
-# endif
-#elif 0
-# undef lstat
-# define lstat lstat_used_without_requesting_gnulib_module_lstat
-#elif defined GNULIB_POSIXCHECK
-# undef lstat
-# if HAVE_RAW_DECL_LSTAT
-_GL_WARN_ON_USE (lstat, "lstat is unportable - "
-                 "use gnulib module lstat for portability");
-# endif
-#endif
-
-
-#if 0
 # if 0
 #  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
 #   undef mkdir
@@ -1402,6 +1364,44 @@ _GL_WARN_ON_USE (stat, "stat is unportable - "
 #endif
 
 
+#if 0
+# if ! 1
+/* mingw does not support symlinks, therefore it does not have lstat.  But
+   without links, stat does just fine.  */
+#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
+#   define lstat stat
+#  endif
+_GL_CXXALIAS_RPL_1 (lstat, stat, int,
+                    (const char *restrict name, struct stat *restrict buf));
+# elif 0
+#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
+#   undef lstat
+#   define lstat rpl_lstat
+#  endif
+_GL_FUNCDECL_RPL (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf)
+                  _GL_ARG_NONNULL ((1, 2)));
+_GL_CXXALIAS_RPL (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf));
+# else
+_GL_CXXALIAS_SYS (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf));
+# endif
+# if 1
+_GL_CXXALIASWARN (lstat);
+# endif
+#elif 0
+# undef lstat
+# define lstat lstat_used_without_requesting_gnulib_module_lstat
+#elif defined GNULIB_POSIXCHECK
+# undef lstat
+# if HAVE_RAW_DECL_LSTAT
+_GL_WARN_ON_USE (lstat, "lstat is unportable - "
+                 "use gnulib module lstat for portability");
+# endif
+#endif
+
+
 #if 1
 /* On native Windows, map 'umask' to '_umask', so that -loldnames is not
    required.  In C++ with GNULIB_NAMESPACE, avoid differences between
diff --git a/gl/sys_stat.in.h b/gl/sys_stat.in.h
index 714c3cb..0ec320f 100644
--- a/gl/sys_stat.in.h
+++ b/gl/sys_stat.in.h
@@ -596,44 +596,6 @@ _GL_WARN_ON_USE (lchmod, "lchmod is unportable - "
 #endif
 
 
-#if @GNULIB_LSTAT@
-# if ! @HAVE_LSTAT@
-/* mingw does not support symlinks, therefore it does not have lstat.  But
-   without links, stat does just fine.  */
-#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-#   define lstat stat
-#  endif
-_GL_CXXALIAS_RPL_1 (lstat, stat, int,
-                    (const char *restrict name, struct stat *restrict buf));
-# elif @REPLACE_LSTAT@
-#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-#   undef lstat
-#   define lstat rpl_lstat
-#  endif
-_GL_FUNCDECL_RPL (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf)
-                  _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf));
-# else
-_GL_CXXALIAS_SYS (lstat, int,
-                  (const char *restrict name, struct stat *restrict buf));
-# endif
-# if @HAVE_LSTAT@
-_GL_CXXALIASWARN (lstat);
-# endif
-#elif @GNULIB_OVERRIDES_STRUCT_STAT@
-# undef lstat
-# define lstat lstat_used_without_requesting_gnulib_module_lstat
-#elif defined GNULIB_POSIXCHECK
-# undef lstat
-# if HAVE_RAW_DECL_LSTAT
-_GL_WARN_ON_USE (lstat, "lstat is unportable - "
-                 "use gnulib module lstat for portability");
-# endif
-#endif
-
-
 #if @GNULIB_MKDIR@
 # if @REPLACE_MKDIR@
 #  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
@@ -895,6 +857,44 @@ _GL_WARN_ON_USE (stat, "stat is unportable - "
 #endif
 
 
+#if @GNULIB_LSTAT@
+# if ! @HAVE_LSTAT@
+/* mingw does not support symlinks, therefore it does not have lstat.  But
+   without links, stat does just fine.  */
+#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
+#   define lstat stat
+#  endif
+_GL_CXXALIAS_RPL_1 (lstat, stat, int,
+                    (const char *restrict name, struct stat *restrict buf));
+# elif @REPLACE_LSTAT@
+#  if !(defined __cplusplus && defined GNULIB_NAMESPACE)
+#   undef lstat
+#   define lstat rpl_lstat
+#  endif
+_GL_FUNCDECL_RPL (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf)
+                  _GL_ARG_NONNULL ((1, 2)));
+_GL_CXXALIAS_RPL (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf));
+# else
+_GL_CXXALIAS_SYS (lstat, int,
+                  (const char *restrict name, struct stat *restrict buf));
+# endif
+# if @HAVE_LSTAT@
+_GL_CXXALIASWARN (lstat);
+# endif
+#elif @GNULIB_OVERRIDES_STRUCT_STAT@
+# undef lstat
+# define lstat lstat_used_without_requesting_gnulib_module_lstat
+#elif defined GNULIB_POSIXCHECK
+# undef lstat
+# if HAVE_RAW_DECL_LSTAT
+_GL_WARN_ON_USE (lstat, "lstat is unportable - "
+                 "use gnulib module lstat for portability");
+# endif
+#endif
+
+
 #if @GNULIB_MDA_UMASK@
 /* On native Windows, map 'umask' to '_umask', so that -loldnames is not
    required.  In C++ with GNULIB_NAMESPACE, avoid differences between
diff --git a/gl/unistd.in.h b/gl/unistd.in.h
index 57df09e..ef3e68f 100644
--- a/gl/unistd.in.h
+++ b/gl/unistd.in.h
@@ -1143,7 +1143,9 @@ _GL_FUNCDECL_SYS (getdomainname, int, (char *name, size_t len)
 #  endif
 _GL_CXXALIAS_SYS (getdomainname, int, (char *name, size_t len));
 # endif
+# if __GLIBC__ >= 2
 _GL_CXXALIASWARN (getdomainname);
+# endif
 #elif defined GNULIB_POSIXCHECK
 # undef getdomainname
 # if HAVE_RAW_DECL_GETDOMAINNAME