Remove obsolete check_ntp.pl

2 files changed, 1 insertions, 472 deletions

diff --git a/plugins-scripts/Makefile.am b/plugins-scripts/Makefile.am
index 58db060..4ea262a 100644
--- a/plugins-scripts/Makefile.am
+++ b/plugins-scripts/Makefile.am
@@ -19,7 +19,7 @@ libexec_SCRIPTS = check_breeze check_disk_smb check_flexlm check_ircd \
         utils.sh utils.pm
 
 EXTRA_DIST=check_breeze.pl check_disk_smb.pl check_flexlm.pl check_ircd.pl \
-        check_log.sh check_ntp.pl check_oracle.sh check_rpc.pl check_sensors.sh \
+        check_log.sh check_oracle.sh check_rpc.pl check_sensors.sh \
         check_ifstatus.pl check_ifoperstatus.pl check_wave.pl check_mailq.pl check_file_age.pl \
         utils.sh.in utils.pm.in t
 
diff --git a/plugins-scripts/check_ntp.pl b/plugins-scripts/check_ntp.pl
deleted file mode 100755
index d452b1b..0000000
--- a/plugins-scripts/check_ntp.pl
+++ /dev/null
@@ -1,471 +0,0 @@
-#!/usr/bin/perl -w
-#
-# (c)1999 Ian Cass, Knowledge Matters Ltd.
-# Read the GNU copyright stuff for all the legalese
-#
-# Check NTP time servers plugin. This plugin requires the ntpdate utility to
-# be installed on the system, however since it's part of the ntp suite, you 
-# should already have it installed.
-#
-#
-# Nothing clever done in this program - its a very simple bare basics hack to
-# get the job done.
-#
-# Things to do...
-# check @words[9] for time differences greater than +/- x secs & return a
-# warning.
-#
-# (c) 1999 Mark Jewiss, Knowledge Matters Limited
-# 22-9-1999, 12:45
-#
-# Modified script to accept 2 parameters or set defaults.
-# Now issues warning or critical alert is time difference is greater than the 
-# time passed.
-#
-# These changes have not been tested completely due to the unavailability of a
-# server with the incorrect time.
-#
-# (c) 1999 Bo Kersey, VirCIO - Managed Server Solutions <bo@vircio.com>
-# 22-10-99, 12:17
-#
-# Modified the script to give useage if no parameters are input.
-#
-# Modified the script to check for negative as well as positive 
-# time differences.
-#
-# Modified the script to work with ntpdate 3-5.93e Wed Apr 14 20:23:03 EDT 1999
-#
-# Modified the script to work with ntpdate's that return adjust or offset...
-#
-#
-# Script modified 2000 June 01 by William Pietri <william@bianca.com>
-#
-# Modified script to handle weird cases:
-#     o NTP server doesn't respond (e.g., has died)
-#     o Server has correct time but isn't suitable synchronization
-#           source. This happens while starting up and if contact
-#           with master has been lost.
-#
-# Modifed to run under Embedded Perl  (sghosh@users.sf.net)
-#   - combined logic some blocks together..
-# 
-# Added ntpdate check for stratum 16 desynch peer (James Fidell) Feb 03, 2003
-#
-# ntpdate - offset is in seconds
-# changed ntpdc to ntpq - jitter/dispersion is in milliseconds
-#
-# Patch for for regex for stratum1 refid.
-
-require 5.004;
-use POSIX;
-use strict;
-use Getopt::Long;
-use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_O $opt_j $opt_k $verbose $PROGNAME $def_jitter $ipv4 $ipv6);
-use lib utils.pm;
-use utils qw($TIMEOUT %ERRORS &print_revision &support);
-
-$PROGNAME="check_ntp";
-
-sub print_help ();
-sub print_usage ();
-
-$ENV{'PATH'}='';
-$ENV{'BASH_ENV'}='';
-$ENV{'ENV'}='';
-
-# defaults in sec
-my $DEFAULT_OFFSET_WARN =  60;  # 1 minute
-my $DEFAULT_OFFSET_CRIT = 120;  # 2 minutes
-# default in millisec
-my $DEFAULT_JITTER_WARN =   5000; # 5 sec
-my $DEFAULT_JITTER_CRIT =  10000; # 10 sec
-
-Getopt::Long::Configure('bundling');
-GetOptions
-        ("V"   => \$opt_V, "version"    => \$opt_V,
-         "h"   => \$opt_h, "help"       => \$opt_h,
-         "v"   => \$verbose, "verbose"  => \$verbose,
-         "4"   => \$ipv4, "use-ipv4"    => \$ipv4,
-         "6"   => \$ipv6, "use-ipv6"    => \$ipv6,
-         "w=f" => \$opt_w, "warning=f"  => \$opt_w,   # offset|adjust warning if above this number
-         "c=f" => \$opt_c, "critical=f" => \$opt_c,   # offset|adjust critical if above this number
-         "O"   => \$opt_O, "zero-offset" => \$opt_O,  # zero-offset  bad
-         "j=s" => \$opt_j, "jwarn=i"    => \$opt_j,   # jitter warning if above this number
-         "k=s" => \$opt_k, "jcrit=i"    => \$opt_k,   # jitter critical if above this number
-         "t=s" => \$opt_t, "timeout=i"  => \$opt_t,
-         "H=s" => \$opt_H, "hostname=s" => \$opt_H);
-
-if ($opt_V) {
-        print_revision($PROGNAME,'@NP_VERSION@');
-        exit $ERRORS{'OK'};
-}
-
-if ($opt_h) {
-        print_help();
-        exit $ERRORS{'OK'};
-}
-
-# jitter test params specified
-if (defined $opt_j || defined $opt_k ) {
-        $def_jitter = 1;
-}
-
-$opt_H = shift unless ($opt_H);
-my $host = $1 if ($opt_H && $opt_H =~ m/^([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+|[a-zA-Z][-a-zA-Z0-9]+(\.[a-zA-Z][-a-zA-Z0-9]+)*)$/);
-unless ($host) {
-        print "No target host specified\n";
-        print_usage();
-        exit $ERRORS{'UNKNOWN'};
-}
-
-my ($timeout, $owarn, $ocrit, $jwarn, $jcrit);
-
-$timeout = $TIMEOUT;
-($opt_t) && ($opt_t =~ /^([0-9]+)$/) && ($timeout = $1);
-
-$owarn = $DEFAULT_OFFSET_WARN;
-($opt_w) && ($opt_w =~ /^([0-9.]+)$/) && ($owarn = $1);
-
-$ocrit = $DEFAULT_OFFSET_CRIT;
-($opt_c) && ($opt_c =~ /^([0-9.]+)$/) && ($ocrit = $1);
-
-$jwarn = $DEFAULT_JITTER_WARN;
-($opt_j) && ($opt_j =~ /^([0-9]+)$/) && ($jwarn = $1);
-
-$jcrit = $DEFAULT_JITTER_CRIT;
-($opt_k) && ($opt_k =~ /^([0-9]+)$/) && ($jcrit = $1);
-
-if ($ocrit < $owarn ) {
-        print "Critical offset should be larger than warning offset\n";
-        print_usage();
-        exit $ERRORS{"UNKNOWN"};
-}
-
-if ($def_jitter) {
-        if ($opt_k < $opt_j) {
-                print "Critical jitter should be larger than warning jitter\n";
-                print_usage();
-                exit $ERRORS{'UNKNOWN'};
-        }
-}
-
-
-my $stratum = -1;
-my $ignoreret = 0;
-my $answer = undef;
-my $offset = undef;
-my $jitter = undef;
-my $syspeer = undef;
-my $candidate = 0;
-my @candidates;
-my $msg; # first line of output to print if format is invalid
-
-my $state = $ERRORS{'UNKNOWN'};
-my $ntpdate_error = $ERRORS{'UNKNOWN'};
-my $jitter_error = $ERRORS{'UNKNOWN'};
-
-# some systems don't have a proper ntpq  (migrated from ntpdc)
-my $have_ntpq = undef;
-if ($utils::PATH_TO_NTPQ && -x $utils::PATH_TO_NTPQ ) {
-        $have_ntpq = 1;  
-}else{
-        $have_ntpq = 0;
-}
-
-# Just in case of problems, let's not hang the monitoring system
-$SIG{'ALRM'} = sub {
-        print ("ERROR: No response from ntp server (alarm)\n");
-        exit $ERRORS{"UNKNOWN"};
-};
-alarm($timeout);
-
-# Determine protocol to be used for ntpdate and ntpq
-my $ntpdate = $utils::PATH_TO_NTPDATE;
-my $ntpq    = $utils::PATH_TO_NTPQ;
-if ($ipv4) {
-        $ntpdate .= " -4";
-        $ntpq .= " -4";
-}
-elsif ($ipv6) {
-        $ntpdate .= " -6";
-        $ntpq .= " -6";
-}
-# else don't use any flags
-
-###
-###
-### First, check ntpdate
-###
-###
-
-if (!open (NTPDATE, $ntpdate . " -q $host 2>&1 |")) {
-        print "Could not open $ntpdate: $!\n";
-        exit $ERRORS{"UNKNOWN"};
-}
-
-my $out;
-while (<NTPDATE>) {
-        #print if ($verbose);  # noop
-        $msg = $_ unless ($msg);
-        $out .= "$_ ";
-        
-        if (/stratum\s(\d+)/) {
-                $stratum = $1;
-        }
-        
-        if (/(offset|adjust)\s+([-.\d]+)/i) {
-                $offset = $2;
-
-                # An offset of 0.000000 with an error is probably bogus. Actually,
-                # it's probably always bogus, but let's be paranoid here.
-                # Has been reported that 0.0000 happens in a production environment
-                # on Solaris 8 so this check should be taken out - SF tracker 1150777
-                if (defined $opt_O ) {
-                        if ($offset == 0) { undef $offset;}
-                }
-
-                $ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
-                print "ntperr = $ntpdate_error \n" if $verbose;
-        
-        }
-
-        if (/no server suitable for synchronization found/) {
-                if ($stratum == 16) {
-                        $ntpdate_error = $ERRORS{"WARNING"};
-                        $msg = "Desynchronized peer server found";
-                        $ignoreret=1;
-                }
-                else {
-                        $ntpdate_error = $ERRORS{"CRITICAL"};
-                        $msg = "No suitable peer server found - ";
-                }
-        }
-
-}
-$out =~ s/\n//g;
-close (NTPDATE) || 
-    die $! ? "$out - Error closing $ntpdate pipe: $!"
-           : "$out - Exit status: $? from $ntpdate\n";
-
-# declare an error if we also get a non-zero return code from ntpdate
-# unless already set to critical
-if ( $? && !$ignoreret ) {
-        print "stderr = $? : $! \n" if $verbose;
-        $ntpdate_error = $ntpdate_error == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"}  ;
-        print "ntperr = $ntpdate_error : $!\n" if $verbose;
-}
-
-###
-###
-### Then scan xntpq/ntpq if it exists
-### and look in the 11th column for jitter 
-###
-# Field 1: Tally Code ( Space, 'x','.','-','+','#','*','o')
-#           Only match for '*' which implies sys.peer 
-#           or 'o' which implies pps.peer
-#           If both exist, the last one is picked. 
-# Field 2: address of the remote peer
-# Field 3: Refid of the clock (0.0.0.0 if unknown, WWWV/PPS/GPS/ACTS/USNO/PCS/... if Stratum1)
-# Field 4: stratum (0-15)
-# Field 5: Type of the peer: local (l), unicast (u), multicast (m) 
-#          broadcast (b); not sure about multicast/broadcast
-# Field 6: last packet receive (in seconds)
-# Field 7: polling interval
-# Field 8: reachability resgister (octal) 
-# Field 9: delay
-# Field 10: offset
-# Field 11: dispersion/jitter
-# 
-# According to bug 773588 Some solaris xntpd implementations seemto match on
-# "#" even though the docs say it exceeds maximum distance. Providing patch
-# here which will generate a warining.
-
-if ($have_ntpq) {
-
-        if ( open(NTPQ, $ntpq . " -np $host 2>&1 |") ) {
-                while (<NTPQ>) {
-                        print $_ if ($verbose);
-                        if ( /timed out/ ){
-                                $have_ntpq = 0 ;
-                                last ;
-                        }
-                        # number of candidates on <host> for sys.peer
-                        if (/^(\*|\+|\#|o])/) {
-                                ++$candidate;
-                                push (@candidates, $_);
-                                print "Candidate count= $candidate\n" if ($verbose);
-                        }
-                        
-                        # match sys.peer or pps.peer
-                        if (/^(\*|o)(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)/) {
-                                $syspeer = $2;
-                                $stratum = $4;
-                                $jitter = $11;
-                                print "match $_ \n" if $verbose;
-                                if ($jitter > $jcrit) {
-                                        print "Jitter_crit = $11 :$jcrit\n" if ($verbose);
-                                        $jitter_error = $ERRORS{'CRITICAL'};
-                                } elsif ($jitter > $jwarn ) {
-                                        print "Jitter_warn = $11 :$jwarn\n" if ($verbose);
-                                        $jitter_error = $ERRORS{'WARNING'};
-                                } else {
-                                        $jitter_error = $ERRORS{'OK'};
-                                }
-                        } else {
-                                print "No match!\n" if $verbose;
-                                $jitter = '(not parsed)';
-                        }
-                        
-                }
-                close NTPQ ||
-            die $! ? "Error closing $ntpq pipe: $!"
-                   : "Exit status: $? from $ntpq\n";
-
-                # if we did not match sys.peer or pps.peer but matched # candidates only
-                # generate a warning 
-                # based on bug id 773588
-                unless (defined $syspeer) {
-                        if ($#candidates >=0) {
-                                foreach my $c (@candidates) {
-                                        $c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
-                                        $syspeer = $2;
-                                        $stratum = $4;
-                                        $jitter = $11;
-                                        print "candidate match $c \n" if $verbose;
-                                        if ($jitter > $jcrit) {
-                                                print "Candidate match - Jitter_crit = $11 :$jcrit\n" if ($verbose);
-                                                $jitter_error = $ERRORS{'CRITICAL'};
-                                        }elsif ($jitter > $jwarn ) {
-                                                print "Candidate match - Jitter_warn = $11 :$jwarn \n" if ($verbose);
-                                                $jitter_error = $ERRORS{'WARNING'};
-                                        } else {
-                                                $jitter_error = $ERRORS{'WARNING'};
-                                        }
-                                }
-
-                        }
-                }
-        }
-}
-
-
-if ($ntpdate_error != $ERRORS{'OK'}) {
-        $state = $ntpdate_error;
-        if ($ntpdate_error == $ERRORS{'WARNING'} ) {
-                $answer = $msg;
-        }
-        else {
-                $answer = $msg . "Server for ntp probably down";
-        }
-
-        if (defined($offset) && abs($offset) > $ocrit) {
-                $state = $ERRORS{'CRITICAL'};
-                $answer = "Server Error and offset $offset sec > +/- $ocrit sec";
-        } elsif (defined($offset) && abs($offset) > $owarn) {
-                $answer = "Server error and offset $offset sec > +/- $owarn sec";
-        } elsif (defined($jitter) && abs($jitter) > $jcrit) {
-                $answer = "Server error and jitter $jitter msec > +/- $jcrit msec";
-        } elsif (defined($jitter) && abs($jitter) > $jwarn) {
-                $answer = "Server error and jitter $jitter msec > +/- $jwarn msec";
-        }
-
-} elsif ($have_ntpq && $jitter_error != $ERRORS{'OK'}) {
-        $state = $jitter_error;
-        $answer = "Jitter $jitter too high";
-        if (defined($offset) && abs($offset) > $ocrit) {
-                $state = $ERRORS{'CRITICAL'};
-                $answer = "Jitter error and offset $offset sec > +/- $ocrit sec";
-        } elsif (defined($offset) && abs($offset) > $owarn) {
-                $answer = "Jitter error and offset $offset sec > +/- $owarn sec";
-        } elsif (defined($jitter) && abs($jitter) > $jcrit) {
-                $answer = "Jitter error and jitter $jitter msec > +/- $jcrit msec";
-        } elsif (defined($jitter) && abs($jitter) > $jwarn) {
-                $answer = "Jitter error and jitter $jitter msec > +/- $jwarn msec";
-        }
-
-} elsif( !$have_ntpq ) { # no errors from ntpdate and no ntpq or ntpq timed out
-        if (abs($offset) > $ocrit) {
-                $state = $ERRORS{'CRITICAL'};
-                $answer = "Offset $offset sec > +/- $ocrit sec";
-        } elsif (abs($offset) > $owarn) {
-                $state = $ERRORS{'WARNING'};
-                $answer = "Offset $offset sec > +/- $owarn sec";
-        } elsif (( abs($offset) > $owarn) && $def_jitter ) {
-                $state = $ERRORS{'WARNING'};
-                $answer = "Offset $offset sec > +/- $owarn sec, ntpq timed out";
-        } elsif ( $def_jitter ) {
-                $state = $ERRORS{'WARNING'};
-                $answer = "Offset $offset secs, ntpq timed out";
-        } else{
-                $state = $ERRORS{'OK'};
-                $answer = "Offset $offset secs";
-        }
-
-
-
-} else { # no errors from ntpdate or ntpq
-        if (abs($offset) > $ocrit) {
-                $state = $ERRORS{'CRITICAL'};
-                $answer = "Offset $offset sec > +/- $ocrit sec, jitter $jitter msec";
-        } elsif (abs($jitter) > $jcrit ) {
-                $state = $ERRORS{'CRITICAL'};
-                $answer = "Jitter $jitter msec> +/- $jcrit msec, offset $offset sec";
-        } elsif (abs($offset) > $owarn) {
-                $state = $ERRORS{'WARNING'};
-                $answer = "Offset $offset sec > +/- $owarn sec, jitter $jitter msec";
-        } elsif (abs($jitter) > $jwarn ) {
-                $state = $ERRORS{'WARNING'};
-                $answer = "Jitter $jitter msec> +/- $jwarn msec, offset $offset sec";
-
-        } else {
-                $state = $ERRORS{'OK'};
-                $answer = "Offset $offset secs, jitter $jitter msec, peer is stratum $stratum";
-        }
-        
-}
-
-foreach my $key (keys %ERRORS) {
-        if ($state==$ERRORS{$key}) {
-#               print ("NTP $key: $answer");
-                print ("NTP $key: $answer|offset=$offset, jitter=" . $jitter/1000 .     ",peer_stratum=$stratum\n");
-                last;
-        }
-}
-exit $state;
-
-
-####
-#### subs
-
-sub print_usage () {
-        print "Usage: $PROGNAME -H <host> [-46] [-O] [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
-}
-
-sub print_help () {
-        print_revision($PROGNAME,'@NP_VERSION@');
-        print "Copyright (c) 2003 Bo Kersey/Karl DeBisschop\n";
-        print "\n";
-        print_usage();
-        print "
-Checks the local timestamp offset versus <host> with ntpdate
-Checks the jitter/dispersion of clock signal between <host> and its sys.peer with ntpq\n
--O (--zero-offset)
-     A zero offset on \"ntpdate\" will generate a CRITICAL.\n
--w (--warning)
-     Clock offset in seconds at which a warning message will be generated.\n    Defaults to $DEFAULT_OFFSET_WARN.
--c (--critical) 
-     Clock offset in seconds at which a critical message will be generated.\n   Defaults to $DEFAULT_OFFSET_CRIT.
--j (--jwarn)
-     Clock jitter in milliseconds at which a warning message will be generated.\n       Defaults to $DEFAULT_JITTER_WARN.
--k (--jcrit)
-    Clock jitter in milliseconds at which a critical message will be generated.\n       Defaults to $DEFAULT_JITTER_CRIT.
-    
-    If jitter/dispersion is specified with -j or -k and ntpq times out, then a
-    warning is returned.\n
--4 (--use-ipv4)
-    Use IPv4 connection
--6 (--use-ipv6)
-    Use IPv6 connection
-\n";    
-support();
-}