9 files changed, 586 insertions, 115 deletions

diff --git a/plugins-scripts/Makefile.am b/plugins-scripts/Makefile.am
index ea65aed..088a445 100644
--- a/plugins-scripts/Makefile.am
+++ b/plugins-scripts/Makefile.am
@@ -16,11 +16,13 @@ VPATH=$(top_srcdir) $(top_srcdir)/plugins-scripts $(top_srcdir)/plugins-scripts/
 libexec_SCRIPTS = check_breeze check_disk_smb check_flexlm check_ircd \
         check_log check_oracle check_rpc check_sensors check_wave \
         check_ifstatus check_ifoperstatus check_mailq check_file_age \
+        check_uptime \
         utils.sh utils.pm
 
 EXTRA_DIST=check_breeze.pl check_disk_smb.pl check_flexlm.pl check_ircd.pl \
         check_log.sh check_oracle.sh check_rpc.pl check_sensors.sh \
         check_ifstatus.pl check_ifoperstatus.pl check_wave.pl check_mailq.pl check_file_age.pl \
+        check_uptime.pl \
         utils.sh.in utils.pm.in t
 
 EDIT = sed \
diff --git a/plugins-scripts/check_file_age.pl b/plugins-scripts/check_file_age.pl
index 01b854a..26281dd 100755
--- a/plugins-scripts/check_file_age.pl
+++ b/plugins-scripts/check_file_age.pl
@@ -147,7 +147,7 @@ sub print_help () {
         print "\n";
         print "  -i | --ignore-missing :  return OK if the file does not exist\n";
         print "  <secs>  File must be no more than this many seconds old (default: warn 240 secs, crit 600)\n";
-        print "  <size>  File must be at least this many bytes long (default: crit 0 bytes)\n\n";
+        print "  <size>  File must be at least this many bytes long (default: file size is ignored (0 bytes))\n\n";
         print "  Both <secs> and <size> can specify a range using the standard plugin syntax\n";
         print "  If any of the warning and critical arguments are in range syntax (not just bare numbers)\n";
         print "  then all warning and critical arguments will be interpreted as ranges.\n";
diff --git a/plugins-scripts/check_ifoperstatus.pl b/plugins-scripts/check_ifoperstatus.pl
index 9ede163..c190ce9 100755
--- a/plugins-scripts/check_ifoperstatus.pl
+++ b/plugins-scripts/check_ifoperstatus.pl
@@ -124,10 +124,10 @@ if (!defined($session)) {
 ## map ifdescr to ifindex - should look at being able to cache this value
 
 if (defined $ifdescr || defined $iftype) {
-        # escape "/" in ifdescr - very common in the Cisco world
         if (defined $iftype) {
                 $status=fetch_ifindex($snmpIfType, $iftype);
         } else {
+                # escape "/" in ifdescr - very common in the Cisco world
                 $ifdescr =~ s/\//\\\//g;
                 $status=fetch_ifindex($snmpIfDescr, $ifdescr);  # if using on device with large number of interfaces
                                                                 # recommend use of SNMP v2 (get-bulk)
diff --git a/plugins-scripts/check_ircd.pl b/plugins-scripts/check_ircd.pl
index 22d21c2..d869ae7 100755
--- a/plugins-scripts/check_ircd.pl
+++ b/plugins-scripts/check_ircd.pl
@@ -69,7 +69,9 @@ $ENV{'ENV'}='';
 # -----------------------------------------------------------------[ Global ]--
 
 $PROGNAME = "check_ircd";
-my $NICK="ircd$$";
+# nickname shouldn't be longer than 9 chars, this might happen with large PIDs
+# To prevent this, we cut of the part over 10000
+my $NICK="ircd" . $$ % 10000;
 my $USER_INFO="monitor localhost localhost : ";
         
 # -------------------------------------------------------------[ connection ]--
diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh
index d28c8d0..382bd72 100755
--- a/plugins-scripts/check_log.sh
+++ b/plugins-scripts/check_log.sh
@@ -1,8 +1,7 @@
 #!/bin/sh
 #
 # Log file pattern detector plugin for monitoring
-# Written by Ethan Galstad (nagios@nagios.org)
-# Last Modified: 07-31-1999
+# Written originally by Ethan Galstad (nagios@nagios.org)
 #
 # Usage: ./check_log <log_file> <old_log_file> <pattern>
 #
@@ -60,20 +59,25 @@
 
 PATH="@TRUSTED_PATH@"
 export PATH
-PROGNAME=`basename $0`
-PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
+PROGNAME=$(basename "$0")
+PROGPATH=$(echo "$0" | sed -e 's,[\\/][^\\/][^\\/]*$,,')
 REVISION="@NP_VERSION@"
 
-. $PROGPATH/utils.sh
+. "$PROGPATH"/utils.sh
 
 print_usage() {
     echo "Usage: $PROGNAME -F logfile -O oldlog -q query"
     echo "Usage: $PROGNAME --help"
     echo "Usage: $PROGNAME --version"
+        echo ""
+        echo "Other parameters:"
+        echo "  -a|--all : Print all matching lines"
+        echo "  -p|--perl-regex : Use perl style regular expressions in the query"
+        echo "  -e|--extended-regex : Use extended style regular expressions in the query (not necessary for GNU grep)"
 }
 
 print_help() {
-    print_revision $PROGNAME $REVISION
+    print_revision "$PROGNAME" "$REVISION"
     echo ""
     print_usage
     echo ""
@@ -87,7 +91,7 @@ print_help() {
 
 if [ $# -lt 1 ]; then
     print_usage
-    exit $STATE_UNKNOWN
+    exit "$STATE_UNKNOWN"
 fi
 
 # Grab the command line arguments
@@ -100,79 +104,118 @@ while test -n "$1"; do
     case "$1" in
         --help)
             print_help
-            exit $STATE_OK
+            exit "$STATE_OK"
             ;;
         -h)
             print_help
-            exit $STATE_OK
+            exit "$STATE_OK"
             ;;
         --version)
-            print_revision $PROGNAME $REVISION
-            exit $STATE_OK
+            print_revision "$PROGNAME" "$REVISION"
+            exit "$STATE_OK"
             ;;
         -V)
-            print_revision $PROGNAME $REVISION
-            exit $STATE_OK
+            print_revision "$PROGNAME" "$REVISION"
+            exit "$STATE_OK"
             ;;
         --filename)
             logfile=$2
-            shift
+            shift 2
             ;;
         -F)
             logfile=$2
-            shift
+            shift 2
             ;;
         --oldlog)
             oldlog=$2
-            shift
+            shift 2
             ;;
         -O)
             oldlog=$2
-            shift
+            shift 2
             ;;
         --query)
             query=$2
-            shift
+            shift 2
             ;;
         -q)
             query=$2
-            shift
+            shift 2
             ;;
         -x)
             exitstatus=$2
-            shift
+            shift 2
             ;;
         --exitstatus)
             exitstatus=$2
+            shift 2
+            ;;
+        --extended-regex)
+            ERE=1
+            shift
+            ;;
+        -e)
+            ERE=1
+            shift
+            ;;
+        --perl-regex)
+            PRE=1
+            shift
+            ;;
+        -p)
+            PRE=1
+            shift
+            ;;
+        --all)
+            ALL=1
+            shift
+            ;;
+        -a)
+            ALL=1
             shift
             ;;
         *)
             echo "Unknown argument: $1"
             print_usage
-            exit $STATE_UNKNOWN
+            exit "$STATE_UNKNOWN"
             ;;
     esac
-    shift
 done
 
+# Parameter sanity check
+if [ $ERE ] && [ $PRE ] ; then
+        echo "Can not use extended and perl regex at the same time"
+        exit "$STATE_UNKNOWN"
+fi
+
+GREP="grep"
+
+if [ $ERE ]; then
+        GREP="grep -E"
+fi
+
+if [ $PRE ]; then
+        GREP="grep -P"
+fi
+
 # If the source log file doesn't exist, exit
 
-if [ ! -e $logfile ]; then
+if [ ! -e "$logfile" ]; then
     echo "Log check error: Log file $logfile does not exist!"
-    exit $STATE_UNKNOWN
-elif [ ! -r $logfile ] ; then
+    exit "$STATE_UNKNOWN"
+elif [ ! -r "$logfile" ] ; then
     echo "Log check error: Log file $logfile is not readable!"
-    exit $STATE_UNKNOWN
+    exit "$STATE_UNKNOWN"
 fi
 
 # If the old log file doesn't exist, this must be the first time
 # we're running this test, so copy the original log file over to
 # the old diff file and exit
 
-if [ ! -e $oldlog ]; then
-    cat $logfile > $oldlog
+if [ ! -e "$oldlog" ]; then
+    cat "$logfile" > "$oldlog"
     echo "Log check data initialized..."
-    exit $STATE_OK
+    exit "$STATE_OK"
 fi
 
 # The old log file exists, so compare it to the original log now
@@ -180,31 +223,40 @@ fi
 # The temporary file that the script should use while
 # processing the log file.
 if [ -x /bin/mktemp ]; then
-    tempdiff=`/bin/mktemp /tmp/check_log.XXXXXXXXXX`
+    tempdiff=$(/bin/mktemp /tmp/check_log.XXXXXXXXXX)
 else
-    tempdiff=`/bin/date '+%H%M%S'`
+    tempdiff=$(/bin/date '+%H%M%S')
     tempdiff="/tmp/check_log.${tempdiff}"
-    touch $tempdiff
-    chmod 600 $tempdiff
+    touch "$tempdiff"
+    chmod 600 "$tempdiff"
 fi
 
-diff $logfile $oldlog | grep -v "^>" > $tempdiff
+diff "$logfile" "$oldlog" | grep -v "^>" > "$tempdiff"
+
+if [ $ALL ]; then
+        # Get the last matching entry in the diff file
+        entry=$($GREP "$query" "$tempdiff")
 
-# Count the number of matching log entries we have
-count=`grep -c "$query" $tempdiff`
+        # Count the number of matching log entries we have
+        count=$(echo "$entry" | wc -l)
 
-# Get the last matching entry in the diff file
-lastentry=`grep "$query" $tempdiff | tail -1`
+else
+        # Count the number of matching log entries we have
+        count=$($GREP -c "$query" "$tempdiff")
+
+        # Get the last matching entry in the diff file
+        entry=$($GREP "$query" "$tempdiff" | tail -1)
+fi
 
-rm -f $tempdiff
-cat $logfile > $oldlog
+rm -f "$tempdiff"
+cat "$logfile" > "$oldlog"
 
 if [ "$count" = "0" ]; then # no matches, exit with no error
     echo "Log check ok - 0 pattern matches found"
     exitstatus=$STATE_OK
 else # Print total matche count and the last entry we found
-    echo "($count) $lastentry"
+    echo "($count) $entry"
     exitstatus=$STATE_CRITICAL
 fi
 
-exit $exitstatus
+exit "$exitstatus"
diff --git a/plugins-scripts/check_mailq.pl b/plugins-scripts/check_mailq.pl
index 9ef292e..4bc9487 100755
--- a/plugins-scripts/check_mailq.pl
+++ b/plugins-scripts/check_mailq.pl
@@ -539,7 +539,7 @@ elsif ( $mailq eq "nullmailer" ) {
         while (<MAILQ>) {
             #2006-06-22 16:00:00  282 bytes
 
-            if (/^[1-9][0-9]*-[01][0-9]-[0-3][0-9]\s[0-2][0-9]\:[0-2][0-9]\:[0-2][0-9]\s{2}[0-9]+\sbytes$/) {
+            if (/^[1-9][0-9]*-[01][0-9]-[0-3][0-9]\s[0-2][0-9]\:[0-5][0-9]\:[0-5][0-9]\s+[0-9]+\sbytes/) {
                 $msg_q++ ;
             }
         }
@@ -576,6 +576,8 @@ sub process_arguments(){
                  "t=i" => \$opt_t, "timeout=i"  => \$opt_t,
                  "s"   => \$opt_s, "sudo"       => \$opt_s,
                  "d:s" => \$opt_d, "configdir:s" => \$opt_d
+                 "W=i" => \$opt_W,                            # warning if above this number
+                 "C=i" => \$opt_C,                            # critical if above this number
                  );
 
         if ($opt_V) {
@@ -669,8 +671,8 @@ sub print_help () {
         print "   Feedback/patches to support non-sendmail mailqueue welcome\n\n";
         print "-w (--warning)   = Min. number of messages in queue to generate warning\n";
         print "-c (--critical)  = Min. number of messages in queue to generate critical alert ( w < c )\n";
-        print "-W (--Warning)   = Min. number of messages for same domain in queue to generate warning\n";
-        print "-C (--Critical)  = Min. number of messages for same domain in queue to generate critical alert ( W < C )\n";
+        print "-W               = Min. number of messages for same domain in queue to generate warning\n";
+        print "-C               = Min. number of messages for same domain in queue to generate critical alert ( W < C )\n";
         print "-t (--timeout)   = Plugin timeout in seconds (default = $utils::TIMEOUT)\n";
         print "-M (--mailserver) = [ sendmail | qmail | postfix | exim | nullmailer ] (default = autodetect)\n";
         print "-s (--sudo)      = Use sudo to call the mailq command\n";
diff --git a/plugins-scripts/check_uptime.pl b/plugins-scripts/check_uptime.pl
new file mode 100755
index 0000000..4c9f22d
--- /dev/null
+++ b/plugins-scripts/check_uptime.pl
@@ -0,0 +1,315 @@
+#!@PERL@ -w
+
+# check_uptime - check uptime to see how long the system is running.
+#
+
+# License Information:
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
+# USA
+#
+############################################################################
+
+use POSIX;
+use strict;
+use Getopt::Long;
+use vars qw($opt_V $opt_h $opt_v $verbose $PROGNAME $opt_w $opt_c
+                                        $opt_f $opt_s
+                                        $lower_warn_threshold $upper_warn_threshold
+                                        $lower_crit_threshold $upper_crit_threshold
+                                        $status $state $msg);
+use FindBin;
+use lib "$FindBin::Bin";
+use utils qw(%ERRORS &print_revision &support &usage );
+
+sub print_help ();
+sub print_usage ();
+sub process_arguments ();
+
+$ENV{'PATH'}='@TRUSTED_PATH@';
+$ENV{'BASH_ENV'}=''; 
+$ENV{'ENV'}='';
+$PROGNAME = "check_uptime";
+$state = $ERRORS{'UNKNOWN'};
+
+my $uptime_file = "/proc/uptime";
+
+
+# Process arguments
+
+Getopt::Long::Configure('bundling');
+$status = process_arguments();
+if ($status){
+        print "ERROR: processing arguments\n";
+        exit $ERRORS{"UNKNOWN"};
+}
+
+
+# Get uptime info from file
+
+if ( ! -r $uptime_file ) {
+        print "ERROR: file '$uptime_file' is not readable\n";
+        exit $ERRORS{"UNKNOWN"};
+}
+
+if ( ! open FILE, "<", $uptime_file ) {
+        print "ERROR: cannot read from file '$uptime_file'\n";
+        exit $ERRORS{"UNKNOWN"};
+}
+
+chomp( my $file_content = <FILE> );
+close FILE;
+
+print "$uptime_file: $file_content\n" if $verbose;
+
+# Get first digit value (without fraction)
+my ( $uptime_seconds ) = $file_content =~ /^([\d]+)/;
+
+# Bail out if value is not numeric
+if ( $uptime_seconds !~ /^\d+$/ ) {
+        print "ERROR: no numeric value: $uptime_seconds\n";
+        exit $ERRORS{"UNKNOWN"};
+}
+
+
+# Do calculations for a "pretty" format (2 weeks, 5 days, ...)
+
+my ( $secs, $mins, $hours, $days, $weeks );
+$secs = $uptime_seconds;
+$mins = $hours = $days = $weeks = 0;
+if ( $secs > 100 ) {
+        $mins = int( $secs / 60 );
+        $secs -= $mins * 60;
+}
+if ( $mins > 100 ) {
+        $hours = int( $mins / 60 );
+        $mins -= $hours * 60;
+}
+if ( $hours > 48 ) {
+        $days = int( $hours / 24 );
+        $hours -= $days * 24;
+}
+if ( $days > 14 ) {
+        $weeks = int( $days / 7 );
+        $days -= $weeks * 7;
+}
+
+my $pretty_uptime = "";
+$pretty_uptime .= sprintf( "%d week%s, ",   $weeks, $weeks == 1 ? "" : "s" )  if  $weeks;
+$pretty_uptime .= sprintf( "%d day%s, ",    $days,  $days  == 1 ? "" : "s" )  if  $days;
+$pretty_uptime .= sprintf( "%d hour%s, ",   $hours, $hours == 1 ? "" : "s" )  if  $hours;
+$pretty_uptime .= sprintf( "%d minute%s, ", $mins,  $mins  == 1 ? "" : "s" )  if  $mins;
+# Replace last occurence of comma with "and"
+$pretty_uptime =~ s/, $/ and /;
+# Always print the seconds (though it may be 0 seconds)
+$pretty_uptime .= sprintf( "%d second%s", $secs, $secs == 1 ? "" : "s" );
+
+
+# Default to catch errors in program
+my $state_str = "UNKNOWN";
+
+# Check values
+my $out_of_bounds_text = "";
+if ( $uptime_seconds > $upper_crit_threshold ) {
+        $state_str = "CRITICAL";
+        $out_of_bounds_text = "upper crit";
+} elsif ( $uptime_seconds < $lower_crit_threshold ) {
+        $state_str = "CRITICAL";
+        $out_of_bounds_text = "lower crit";
+} elsif ( $uptime_seconds > $upper_warn_threshold ) {
+        $state_str = "WARNING";
+        $out_of_bounds_text = "upper warn";
+} elsif ( $uptime_seconds < $lower_warn_threshold ) {
+        $state_str = "WARNING";
+        $out_of_bounds_text = "lower warn";
+} else {
+        $state_str = "OK";
+}
+
+$msg = "$state_str: ";
+
+$msg .= "uptime is $uptime_seconds seconds. ";
+$msg .= "Exceeds $out_of_bounds_text threshold. "  if  $out_of_bounds_text;
+$msg .= "Running for $pretty_uptime. "  if  $opt_f;
+if ( $opt_s ) {
+        my $up_since = strftime( "%Y-%m-%d %H:%M:%S", localtime( time - $uptime_seconds ) );
+        $msg .= "Running since $up_since. ";
+}
+
+$state = $ERRORS{$state_str};
+
+# Perfdata support
+print "$msg|uptime=${uptime_seconds}s;$upper_warn_threshold;$upper_crit_threshold;0\n";
+exit $state;
+
+
+#####################################
+#### subs
+
+
+sub process_arguments(){
+        GetOptions
+                ("V"   => \$opt_V, "version"    => \$opt_V,
+                 "v"   => \$opt_v, "verbose"    => \$opt_v,
+                 "h"   => \$opt_h, "help"               => \$opt_h,
+                 "w=s" => \$opt_w, "warning=s"  => \$opt_w,   # warning if above this number
+                 "c=s" => \$opt_c, "critical=s" => \$opt_c,       # critical if above this number
+                 "f"   => \$opt_f, "for"        => \$opt_f,       # show "running for ..."
+                 "s"   => \$opt_s, "since"      => \$opt_s,       # show "running since ..."
+                 );
+
+        if ($opt_V) {
+                print_revision($PROGNAME,'@NP_VERSION@');
+                exit $ERRORS{'UNKNOWN'};
+        }
+
+        if ($opt_h) {
+                print_help();
+                exit $ERRORS{'UNKNOWN'};
+        }
+
+        if (defined $opt_v) {
+                $verbose = $opt_v;
+        }
+
+        unless ( defined $opt_w && defined $opt_c ) {
+                print_usage();
+                exit $ERRORS{'UNKNOWN'};
+        }
+
+    # Check if a range was supplied ("lowvalue:highvalue") for warning and critical
+    # Otherwise, set 0 as the lower threshold and the parameter value as upper threshold
+    # (the uptime should always be positive, so there should be no issue)
+    if ( $opt_w =~ /^(.+):(.+)$/ ) {
+        $lower_warn_threshold = $1;
+        $upper_warn_threshold = $2;
+    } else {
+        $lower_warn_threshold = 0;
+        $upper_warn_threshold = $opt_w;
+    }
+    if ( $opt_c =~ /^(.+):(.+)$/ ) {
+        $lower_crit_threshold = $1;
+        $upper_crit_threshold = $2;
+    } else {
+        $lower_crit_threshold = 0;
+        $upper_crit_threshold = $opt_c;
+    }
+
+        # Set as seconds (calculate if suffix present)
+    $lower_warn_threshold = calc_as_seconds( $lower_warn_threshold );
+    $lower_crit_threshold = calc_as_seconds( $lower_crit_threshold );
+    $upper_warn_threshold = calc_as_seconds( $upper_warn_threshold );
+    $upper_crit_threshold = calc_as_seconds( $upper_crit_threshold );
+
+    # Check for numeric value of warning parameter
+        if ( $lower_warn_threshold !~ /^\d+$/ ) {
+                print "Lower warning (-w) is not numeric\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+        if ( $upper_warn_threshold !~ /^\d+$/ ) {
+                print "Upper warning (-w) is not numeric\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+    # Check for numeric value of critical parameter
+        if ( $lower_crit_threshold !~ /^\d+$/ ) {
+                print "Lower critical (-c) is not numeric\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+        if ( $upper_crit_threshold !~ /^\d+$/ ) {
+                print "Upper critical (-c) is not numeric\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+
+    # Check boundaries
+        if ( $upper_warn_threshold >= $upper_crit_threshold ) {
+                print "Upper Warning (-w) cannot be greater than Critical (-c)!\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+        # No "<=" since both values are zero if no range (only upper threshold values) is given
+        if ( $lower_warn_threshold < $lower_crit_threshold ) {
+                print "Lower Warning (-w) cannot be less than Critical (-c)!\n";
+                exit $ERRORS{'UNKNOWN'};
+        }
+
+        return $ERRORS{'OK'};
+}
+
+sub print_usage () {
+        print "Usage: $PROGNAME -w <warn> -c <crit> [-v]\n";
+}
+
+sub print_help () {
+        print_revision($PROGNAME,'@NP_VERSION@');
+        print "Copyright (c) 2002 Subhendu Ghosh/Carlos Canau/Benjamin Schmid\n";
+        print "Copyright (c) 2018 Bernd Arnold\n";
+        print "\n";
+        print_usage();
+        print "\n";
+        print "   Checks the uptime of the system using $uptime_file\n";
+        print "\n";
+        print "-w (--warning)   = Min. number of uptime to generate warning\n";
+        print "-c (--critical)  = Min. number of uptime to generate critical alert ( w < c )\n";
+        print "-f (--for)       = Show uptime in a pretty format (Running for x weeks, x days, ...)\n";
+        print "-s (--since)     = Show last boot in yyyy-mm-dd HH:MM:SS format (output from 'uptime -s')\n";
+        print "-h (--help)\n";
+        print "-V (--version)\n";
+        print "-v (--verbose)   = debugging output\n";
+        print "\n\n";
+        print "Note: -w and -c are required arguments.\n";
+        print "      You can suffix both values with s for seconds (default), m (minutes), h (hours), d (days) or w (weeks).\n";
+        print "\n";
+        print "Range support: You may specify a range for both warning and critical thresholds.\n";
+        print "               This works without additional Perl modules.\n";
+        print "Example: ./check_uptime -w 10m:4w -c 1m:8w\n";
+        print "         Results in a critical state when uptime is below 60 seconds or higher than 8 weeks,\n";
+        print "         and in a warning state when uptime is below 10 minutes or above 4 weeks.\n";
+        print "\n\n";
+        support();
+}
+
+sub calc_as_seconds () {
+
+    my $parameter = shift;
+
+        # Check if suffix is present
+        # Calculate parameter to seconds (to get an integer value finally)
+        # If no suffix is present, just return the value
+
+        # Possible suffixes:
+        # s = seconds
+        # m = minutes
+        # h = hours
+        # d = days
+        # w = weeks
+        my %factor = ( "s" => 1,
+                       "m" => 60,
+                       "h" => 60 * 60,
+                       "d" => 60 * 60 * 24,
+                       "w" => 60 * 60 * 24 * 7,
+                     );
+
+        if ( $parameter =~ /^(\d+)([a-z])$/ ) {
+                my $value = $1;
+                my $suffix = $2;
+                print "detected: value=$value, suffix=$suffix\n" if $verbose;
+                if ( ! defined $factor{$suffix} ) {
+                        print "Error: wrong suffix ($suffix) for value '$parameter'";
+                        exit $ERRORS{'UNKNOWN'};
+                }
+                $parameter = $value * $factor{$suffix};
+        }
+
+    return $parameter;
+
+}
diff --git a/plugins-scripts/t/check_file_age.t b/plugins-scripts/t/check_file_age.t
index ebf673f..8b87670 100644
--- a/plugins-scripts/t/check_file_age.t
+++ b/plugins-scripts/t/check_file_age.t
@@ -20,105 +20,74 @@ my $temp_link = "/tmp/check_file_age.link.tmp";
 
 unlink $temp_file, $temp_link;
 
-$result = NPTest->testCmd(
-        "./check_file_age"
-        );
+$result = NPTest->testCmd("./check_file_age");
 cmp_ok( $result->return_code, '==', 3, "Missing parameters" );
 like  ( $result->output, $unknownOutput, "Output for unknown correct" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file");
 cmp_ok( $result->return_code, '==', 2, "File not exists" );
 like  ( $result->output, $criticalOutput, "Output for file missing correct" );
 
 write_chars(100);
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file");
 cmp_ok( $result->return_code, '==', 0, "File is new enough" );
 like  ( $result->output, $successOutput, "Output for success correct" );
 
 sleep 2;
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -w 1"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -w 1");
 cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old" );
 like  ( $result->output, $warningOutput, "Output for warning correct" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -w 0:1"
-        );
-cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old by range" );
-like  ( $result->output, $warningOutput, "Output for warning by range correct" );
-
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1");
 cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old" );
 like  ( $result->output, $criticalOutput, "Output for critical correct" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 0:1"
-        );
-cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old by range" );
-like  ( $result->output, $criticalOutput, "Output for critical by range correct" );
-
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 100"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100");
 cmp_ok( $result->return_code, '==', 0, "Checking file size" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 0:1000 -W 0:100"
-        );
-cmp_ok( $result->return_code, '==', 0, "Checking file size by range" );
-
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 100"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100");
 like( $result->output, $performanceOutput, "Checking for performance Output" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 100"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 100");
 like( $result->output, $performanceOutput, "Checking for performance Output from range" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f /non/existent --ignore-missing"
-        );
+$result = NPTest->testCmd("./check_file_age -f /non/existent --ignore-missing");
 cmp_ok( $result->return_code, '==', 0, "Honours --ignore-missing" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 101"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 101");
 cmp_ok( $result->return_code, '==', 1, "One byte too short" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 101:"
-        );
-cmp_ok( $result->return_code, '==', 1, "One byte too short by range" );
-
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -C 101"
-        );
+$result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 101");
 cmp_ok( $result->return_code, '==', 2, "One byte too short - critical" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -C 101:"
-        );
-cmp_ok( $result->return_code, '==', 2, "One byte too short by range - critical" );
+SKIP: {
+    eval 'use Monitoring::Plugin::Range';
+    skip "Monitoring::Plugin::Range module require", 9 if $@;
+
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -w 0:1");
+    cmp_ok( $result->return_code, '==', 1, "Warning for file over 1 second old by range" );
+    like  ( $result->output, $warningOutput, "Output for warning by range correct" );
+
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 0:1");
+    cmp_ok( $result->return_code, '==', 2, "Critical for file over 1 second old by range" );
+    like  ( $result->output, $criticalOutput, "Output for critical by range correct" );
+
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 0:1000 -W 0:100");
+    cmp_ok( $result->return_code, '==', 0, "Checking file size by range" );
+
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 101:");
+    cmp_ok( $result->return_code, '==', 1, "One byte too short by range" );
+
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -W 0:99");
+    cmp_ok( $result->return_code, '==', 1, "One byte too long by range" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -W 0:99"
-        );
-cmp_ok( $result->return_code, '==', 1, "One byte too long by range" );
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 101:");
+    cmp_ok( $result->return_code, '==', 2, "One byte too short by range - critical" );
 
-$result = NPTest->testCmd(
-        "./check_file_age -f $temp_file -c 1000 -C 0:99"
-        );
-cmp_ok( $result->return_code, '==', 2, "One byte too long by range - critical" );
+    $result = NPTest->testCmd("./check_file_age -f $temp_file -c 1000 -C 0:99");
+    cmp_ok( $result->return_code, '==', 2, "One byte too long by range - critical" );
+};
 
 symlink $temp_file, $temp_link or die "Cannot create symlink";
 $result = NPTest->testCmd("./check_file_age -f $temp_link -c 10");
diff --git a/plugins-scripts/t/check_uptime.t b/plugins-scripts/t/check_uptime.t
new file mode 100644
index 0000000..c395307
--- /dev/null
+++ b/plugins-scripts/t/check_uptime.t
@@ -0,0 +1,129 @@
+#!/usr/bin/perl -w -I ..
+#
+# check_uptime tests
+#
+#
+
+use strict;
+use Test::More tests => 40;
+use NPTest;
+
+my $result;
+
+$result = NPTest->testCmd(
+        "./check_uptime"
+        );
+cmp_ok( $result->return_code, '==', 3, "Missing parameters" );
+like  ( $result->output, '/^Usage: check_uptime -w/', "Output for missing parameters correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime --help"
+        );
+cmp_ok( $result->return_code, '==', 3, "Help output requested" );
+like  ( $result->output, '/ABSOLUTELY NO WARRANTY/', "Output for help correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 5 -c 2"
+        );
+cmp_ok( $result->return_code, '==', 3, "Warning greater than critical" );
+like  ( $result->output, '/^Upper Warning .*cannot be greater than Critical/', "Output for warning greater than critical correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -c 1000 -W 100 2>&1"
+        );
+like  ( $result->output, '/^Unknown option: W/', "Output with wrong parameter is correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -f -w 1 -c 2"
+        );
+cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" );
+like  ( $result->output, '/Running for \d+/', "Output for the f parameter correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -s -w 1 -c 2"
+        );
+cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" );
+like  ( $result->output, '/Running since \d+/', "Output for the s parameter correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 1 -c 2"
+        );
+cmp_ok( $result->return_code, '==', 2, "Uptime higher than 2 seconds" );
+like  ( $result->output, '/^CRITICAL: uptime is \d+ seconds/', "Output for uptime higher than 2 seconds correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 1 -c 9999w"
+        );
+cmp_ok( $result->return_code, '==', 1, "Uptime lower than 9999 weeks" );
+like  ( $result->output, '/^WARNING: uptime is \d+ seconds/', "Output for uptime lower than 9999 weeks correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 9998w -c 9999w"
+        );
+cmp_ok( $result->return_code, '==', 0, "Uptime lower than 9998 weeks" );
+like  ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 9998 weeks correct" );
+like  ( $result->output, '/\|uptime=[0-9]+s;6046790400;6047395200;/', "Checking for performance output" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 111222d -c 222333d"
+        );
+cmp_ok( $result->return_code, '==', 0, "Uptime lower than 111222 days" );
+like  ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 111222 days correct" );
+like  ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" );
+
+# Same as before, hopefully uptime is higher than 2 seconds so no warning
+$result = NPTest->testCmd(
+        "./check_uptime -w 2:111222d -c 1:222333d"
+        );
+cmp_ok( $result->return_code, '==', 0, "Uptime lower than 111222 days, and higher 2 seconds" );
+like  ( $result->output, '/^OK: uptime is \d+ seconds/', "Output for uptime lower than 111222 days, and higher 2 seconds correct" );
+like  ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" );
+
+# Same as before, now the low warning should trigger
+$result = NPTest->testCmd(
+        "./check_uptime -w 111221d:111222d -c 1:222333d"
+        );
+cmp_ok( $result->return_code, '==', 1, "Uptime lower than 111221 days raises warning" );
+like  ( $result->output, '/^WARNING: uptime is \d+ seconds/', "Output for uptime lower than 111221 days correct" );
+like  ( $result->output, '/Exceeds lower warn threshold/', "Exceeds text correct" );
+like  ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" );
+
+# Same as before, now the low critical should trigger
+$result = NPTest->testCmd(
+        "./check_uptime -w 111221d:111222d -c 111220d:222333d"
+        );
+cmp_ok( $result->return_code, '==', 2, "Uptime lower than 111220 days raises critical" );
+like  ( $result->output, '/^CRITICAL: uptime is \d+ seconds/', "Output for uptime lower than 111220 days correct" );
+like  ( $result->output, '/Exceeds lower crit threshold/', "Exceeds text correct" );
+like  ( $result->output, '/\|uptime=[0-9]+s;9609580800;19209571200;/', "Checking for performance output" );
+
+
+#
+# Range values using ":" without two parts ("a:b") is invalid
+# Strings without two parts are always considered as upper threshold
+#
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 2: -c 1:4"
+        );
+cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" );
+like  ( $result->output, '/^Upper warning .* is not numeric/', "Output for wrong parameter format correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 2:3 -c 1:"
+        );
+cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" );
+like  ( $result->output, '/^Upper critical .* is not numeric/', "Output for wrong parameter format correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w :3 -c 1:4"
+        );
+cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" );
+like  ( $result->output, '/^Upper warning .* is not numeric/', "Output for wrong parameter format correct" );
+
+$result = NPTest->testCmd(
+        "./check_uptime -w 2:3 -c :4"
+        );
+cmp_ok( $result->return_code, '==', 3, "Wrong parameter format raises unknown" );
+like  ( $result->output, '/^Upper critical .* is not numeric/', "Output for wrong parameter format correct" );
+