[Nagiosplug-help] check_snmp is always 'warning' for me, also.

[Charles Sprickman]

On Wed, 29 Sep 2004 DKatz at solarcom.com wrote:

> I inserted some printf's into the code to print out the stderr string 
> and found out that some of my mibs were not well formatted.  Since I am 
> only using mib-2 defined values for monitoring, I removed the offending 
> mibs from the mib directory.  Everything works now.

I found that this works as well:

/usr/local/libexec/nagios/check_snmp -H  spamd1 -m UCD-SNMP-MIB -o 
laLoadInt.1 -w 0:1000 -c 0:10000 -C deadbeef
SNMP OK - 23

The "-m UCD-SNMP-MIB" limits me to that mib only, and the default without 
a "-m" is to load all mibs.

The bigger mystery to me is why this complaint?

Did not find 'zeroDotZero' in module SNMPv2-SMI 
(/usr/local/share/snmp/mibs/DISMAN-EVENT-MIB.txt)

Looking at that file, it's one that came with net-snmp...  But that's 
another list I suppose. :)

Thanks again,

Charles

>
> Doug Katz
>
>
>
>
>
>
>             DKatz at solarcom.co
>             m
>             Sent by:                                                   To
>             nagiosplug-help-a         <hmann at itgroundwork.com>
>             dmin at lists.source                                          cc
>             forge.net                 nagiosplug-help at lists.sourceforge.n
>                                       et
>                                                                   Subject
>             09/29/2004 08:52          RE: [Nagiosplug-help] check_snmp is
>             AM                        always 'warning' for me, also.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Same thing.  I tried many combinations of limits.  I started with '-w 0:75
> -c 0:85.'   but tried all sorts of patterns including reversing the min max
> and strange patterns that go against the expected logic.  The critical
> level worked like the documentation says.
>
> If the values do not overlap, such as: '-w 0:74 -c 75:100' then if the
> return is 1, then you would flagged as CRITICAL because it would be outside
> the Critical range.
>
> One thing I did notice, when the values should have been outside the
> warning range, and the return should be WARNING, the value returned from
> the SNMP call had asterisks preceding and following the value.
>
> For example: 'SNMP   WARNING  -  *10*'
>
> I also checked the return value when the result should have been OK.  It
> was 1.  However, no asterisks.
>
>
> Doug Katz
> Solarcom, LLC.
>
>
>
>
>             "Harper Mann"
>             <hmann at itgroundwo
>             rk.com>                                                    To
>                                       <DKatz at solarcom.com>,
>             09/28/2004 06:50          <nagiosplug-help at lists.sourceforge.
>             PM                        net>
>                                                                        cc
>
>             Please respond to                                     Subject
>             <hmann at itgroundwo         RE: [Nagiosplug-help] check_snmp is
>                  rk.com>              always 'warning' for me, also.
>
>
>
>
>
>
>
>
>
>
> What happens if the warning and critical ranges don't overlap?
>
> - Harper
>
> Harper Mann
> Groundwork Open Source Solutions
> 510-599-2075 (cell)
>
>
> -----Original Message-----
> From: nagiosplug-help-admin at lists.sourceforge.net
> [mailto:nagiosplug-help-admin at lists.sourceforge.net] On Behalf Of
> DKatz at solarcom.com
> Sent: Tuesday, September 28, 2004 1:44 PM
> To: nagiosplug-help at lists.sourceforge.net
> Subject: [Nagiosplug-help] check_snmp is always 'warning' for me, also.
>
>
>
>
>
> I am having the same problem as Charles Sprickman.
>
> I am checking processor usage on a system and it returns a '1' in the
> following command:
>
> dkatz at clmon:/usr/local/nagios/libexec> ./check_snmp -H 10.1.100.201 \
>             -o .1.3.6.1.2.1.25.3.3.1.2.1  -C public -w 0:100 -c 0:100
>
> SNMP WARNING - 1
>
> I have tried all sorts of OIDs and ranges.  I even used the range of: '0:'
> for both warning and critical.  This string should mean from zero
> to infinity.  My unsigned integer should be in that range.
>
> How do we fix this?
>
> My OS is Suse 9.0.  I just downloaded the latest plugins and compiled them.
>
> Doug Katz
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
> Use IT products in your business? Tell us what you think of them. Give us
> Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
> http://productguide.itmanagersjournal.com/guidepromo.tmpl
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
> Use IT products in your business? Tell us what you think of them. Give us
> Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
> http://productguide.itmanagersjournal.com/guidepromo.tmpl
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
> Use IT products in your business? Tell us what you think of them. Give us
> Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
> http://productguide.itmanagersjournal.com/guidepromo.tmpl
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>